Naively computing the hash after the PDB data has been generated is in practice
as fast as other approaches I tried. I also tried online-computing the hash as
parts of the PDB were written out (https://reviews.llvm.org/D51887; that's also
where all the measuring data is) and computing the hash in parallel
(https://reviews.llvm.org/D51957). This approach here is simplest, without
being slower.
Differential Revision: https://reviews.llvm.org/D51956
llvm-svn: 342333
Eventually we need to be able to support nested types, which don't
have an associated CVType record. To handle this, remove the
CVType from all of the record classes, and instead store the
deserialized record. Then move the deserialization up to the thing
that creates the type. This actually makes error handling better
anyway as we can return an invalid symbol instead of asserting false.
llvm-svn: 342284
r342003 added support for emitting FPO data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the PDB
file. However, that is not the end of the story. FPO can end
up in two different destinations in a PDB, each corresponding to
a different FPO data source.
The case handled by r342003 involves copying data from the
DEBUG_S_FRAMEDATA subsection of the .debug$S section to the
"New FPO" stream in the PDB, which is then referred to by the
DBI stream. The case handled by this patch involves copying
records from the .debug$F section of an object file to the "FPO"
stream (or perhaps more aptly, the "Old FPO" stream) in the PDB
file, which is also referred to by the DBI stream.
The formats are largely similar, and the difference is mostly
only visible in masm generated object files, such as some of the
low-level CRT object files like memcpy. MASM doesn't appear to
support writing the DEBUG_S_FRAMEDATA subsection, and instead
just writes these records to the .debug$F section.
Although clang-cl does not emit a .debug$F section ever, lld still
needs to support it so we have good debugging for CRT functions.
Differential Revision: https://reviews.llvm.org/D51958
llvm-svn: 342080
Eliminating some duplication of rangelist dumping code at the expense of
some version-dependent code in dump and extract routines.
Reviewer: dblaikie, JDevlieghere, vleschuk
Differential revision: https://reviews.llvm.org/D51081
llvm-svn: 342048
Summary:
There are two registers encoded in the S_FRAMEPROC flags: one for locals
and one for parameters. The encoding is described by the
ExpandEncodedBasePointerReg function in cvinfo.h. Two bits are used to
indicate one of four possible values:
0: no register - Used when there are no variables.
1: SP / standard - Variables are stored relative to the standard SP
for the ISA.
2: FP - Variables are addressed relative to the ISA frame
pointer, i.e. EBP on x86. If realignment is required, parameters
use this. If a dynamic alloca is used, locals will be EBP relative.
3: Alternative - Variables are stored relative to some alternative
third callee-saved register. This is required to address highly
aligned locals when there are dynamic stack adjustments. In this
case, both the incoming SP saved in the standard FP and the current
SP are at some dynamic offset from the locals. LLVM uses ESI in
this case, MSVC uses EBX.
Most of the changes in this patch are to pass around the CPU so that we
can decode these into real, named architectural registers.
Subscribers: hiraditya
Differential Revision: https://reviews.llvm.org/D51894
llvm-svn: 341999
Makes the produced pdbs more deterministic; before they'd contain 2 arbitary
bytes where this padding was.
Also reorder initialization to match the order of the fields in the struct (nfc)
llvm-svn: 341945
With the merge of TUs and CUs into a single container, some code that
relied on the CU range having an ordered range of contiguous addresses
(for locating a CU at a given offset) broke. But the units from
debug_info (currently only CUs, but CUs and TUs in DWARFv5) are in a
contiguous sub-range of that container - searching only through that
subrange is still valid & so do that.
llvm-svn: 341889
clang-format was getting confused due to the presence of a macro
invocation that was not terminated by a semicolon. Fixed this by
terminating the macro lines with semicolons and re-ran clang-format
on the file.
llvm-svn: 341864
- Log the reason for a PDB or precompiled-OBJ load failure
- Properly handle out-of-date PDB or precompiled-OBJ signature by displaying a corresponding error
- Slightly change behavior on PDB failure: any subsequent load attempt from another OBJ would result in the same error message being logged
- Slightly change behavior on PDB failure: retry with filename only if previous error was ENOENT ("no such file or directory")
- Tests: a. for native PDB errors; b. cover all the cases above
Differential Revision: https://reviews.llvm.org/D51559
llvm-svn: 341825
They were unintentionally calling DIA directly, which requires
Windows. We need to pass the -native flag, and this then required
fixing up one or two tests.
llvm-svn: 341731
In order to start testing this, I've added a new mode to
llvm-pdbutil which is only really useful for writing tests.
It just dumps the value of raw fields in record format.
This isn't really ideal and it won't allow us to test some
important cases, but it's better than nothing for now.
llvm-svn: 341729
Part of the responsibility of the native PDB reader is to cache
symbols the first time they are accessed, so they can then be
looked up by an ID. Furthermore, we need to resolve type indices
to records that we vend to the user, and other things. Previously
this code was all thrown together a bit haphazardly in the native
session class, but it makes sense to collect all of this into a
single class whose sole responsibility is to manage the collection
of known symbols.
llvm-svn: 341608
The way DIA SDK works is that when you request a symbol, it
gets assigned an internal identifier that is unique for the
life of the session. You can then use this identifier to
get back the same symbol, with all of the same internal state
that it had before, even if you "destroyed" the original
copy of the object you had.
This didn't work properly in our native implementation, and
if you destroyed an object for a particular symbol, then
requested the same symbol again, it would get assigned a new
ID and you'd get a fresh copy of the object. In order to fix
this some refactoring had to happen to properly reuse cached
objects. Some unittests are added to verify that symbol
reuse is taking place, making use of the new unittest input
feature.
llvm-svn: 341503
The -diff option makes it easy to diff dwarf by hiding addresses and
offsets. However not all of them were hidden, which should be fixed by
this patch.
Differential revision: https://reviews.llvm.org/D51593
llvm-svn: 341377
According to the standard, for the .debug_names (the "dwarf accelerator
tables"):
> If a subprogram or inlined subroutine is included, and has a
> DW_AT_linkage_name attribute, there will be an additional index entry
> for the linkage name.
For Swift we generate DW_structure_types with a linkage name and the
verifier was incorrectly rejecting this. This patch fixes that by only
considering the linkage name in those particular cases. The test is the
"reduced" debug info of the failing swift test on swift.org.
Differential revision: https://reviews.llvm.org/D51420
llvm-svn: 341311
Following D50807, and heading towards D50664, this intermediary change does the following:
1. Upgrade all custom Error types in llvm/trunk/lib/DebugInfo/ to use the new StringError behavior (D50807).
2. Implement std::is_error_code_enum and make_error_code() for DebugInfo error enumerations.
3. Rename GenericError -> PDBError (the file will be renamed in a subsequent commit)
4. Update custom error messages to follow the same formatting: (\w\s*)+\.
5. Keep generic "file not found" (ENOENT) errors as they are in PDB code. Previously, there used to be a custom enumeration for that purpose.
6. Remove a few extraneous LF in log() implementations. Printing LF is a responsability at a higher level, not at the error level.
Differential Revision: https://reviews.llvm.org/D51499
llvm-svn: 341228
Both DWARFDebugLine and DWARFDebugAddr used the same callback mechanism
for handling recoverable errors. They both implemented similar warn() function
to be used as such callbacks.
In this revision we get rid of code duplication and move this warn() function
to DWARFContext as DWARFContext::dumpWarning().
Reviewers: lhames, jhenderson, aprantl, probinson, dblaikie, JDevlieghere
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D51033
llvm-svn: 340528
DWARF-related classes in lib/DebugInfo/DWARF contained
duplicating code for creating StringError instances, like:
template <typename... Ts>
static Error createError(char const *Fmt, const Ts &... Vals) {
std::string Buffer;
raw_string_ostream Stream(Buffer);
Stream << format(Fmt, Vals...);
return make_error<StringError>(Stream.str(), inconvertibleErrorCode());
}
Similar function was placed in Support lib in https://reviews.llvm.org/D49824
This revision makes DWARF classes use this function
instead of their local implementation of it.
Reviewers: aprantl, dblaikie, probinson, wolfgangp, JDevlieghere, jhenderson
Reviewed By: JDevlieghere, jhenderson
Differential Revision: https://reviews.llvm.org/D49964
llvm-svn: 340163
Summary:
This prefix was added in r333421, and it changed our dumper output to
say things like "CVRegEAX" instead of just "EAX". That's a functional
change that I'd rather avoid.
I tested GCC, Clang, and MSVC, and all of them support #pragma
push_macro. They don't issue warnings whem the macro is not defined
either.
I don't have a Mac so I can't test the real termios.h header, but I
looked at the termios.h sources online and looked for other conflicts.
I saw only the CR* macros, so those are the ones we work around.
Reviewers: zturner, JDevlieghere
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D50851
llvm-svn: 339907
We don't expect module names to be present in the index. This patch adds
DW_TAG_module to the blacklist.
Differential revision: https://reviews.llvm.org/D50237
llvm-svn: 338878
This is patch 4 of 4 NFC refactorings to handle type units and compile
units more consistently and with less concern about the object-file
section that they came from.
Patch 4 combines separate DWARFUnitVectors for compile and type units
into a single DWARFUnitVector that contains both. For now the
implementation distinguishes compile units from type units by putting
all compile units at the front of the vector, reflecting the DWARF v4
distinction between .debug_info and .debug_types sections. A future
patch will change this to allow the free mixing of unit kinds, as is
specified by DWARF v5.
Differential Revision: https://reviews.llvm.org/D49744
llvm-svn: 338633
This is patch 3 of 4 NFC refactorings to handle type units and compile
units more consistently and with less concern about the object-file
section that they came from.
Patch 3 simply renames DWARFUnitSection to DWARFUnitVector, as the
object-file section of a unit is nearly irrelevant now.
Differential Revision: https://reviews.llvm.org/D49743
llvm-svn: 338632
This is patch 2 of 4 NFC refactorings to handle type units and compile
units more consistently and with less concern about the object-file
section that they came from.
Patch 2 takes the existing std::deque<DWARFUnitSection> for type units
and makes it a simple DWARFUnitSection, simplifying the handling of
type units and making it more consistent with compile units.
Differential Revision: https://reviews.llvm.org/D49742
llvm-svn: 338629
This is patch 1 of 4 NFC refactorings to handle type units and compile
units more consistently and with less concern about the object-file
section that they came from.
Patch 1 replaces the templated DWARFUnitSection with a non-templated
version. That is, instead of being a SmallVector of pointers to a
specific unit kind, it is not a SmallVector of pointers to the base
class for both type and compile units. Virtual methods are magic.
Differential Revision: https://reviews.llvm.org/D49741
llvm-svn: 338628
Summary: SmallVector's elements are moved when resizing and cause use-after-free.
Reviewers: probinson, dblaikie
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49702
llvm-svn: 337772
The intent is to use it for location list tables as well. Change is almost NFC with the exception
of the spelling of some strings used during dumping (all lowercase now).
Reviewer: JDevlieghere
Differential Revision: https://reviews.llvm.org/D49500
llvm-svn: 337763
For instance, When dumping .apple_types, the second atom represents the
DW_TAG. In addition to printing the raw value, we now also pretty print
the value if the ATOM tells us how.
llvm-svn: 337026
Make the DIE iterator bidirectional so we can move to the previous
sibling of a DIE.
Differential revision: https://reviews.llvm.org/D49173
llvm-svn: 336823
I don't think there's a need to use `const char *`. In most (probably all?)
cases, we need a length of a name later, so discarding a length will
lead to a wasted effort.
Differential Revision: https://reviews.llvm.org/D49046
llvm-svn: 336612
Summary:
If the encoding is not specified in CIE augmentation string, then it
should be DW_EH_PE_absptr instead of DW_EH_PE_omit.
Reviewers: ruiu, MaskRay, plotfi, rafauler
Reviewed By: MaskRay
Subscribers: rafauler, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D49000
llvm-svn: 336577
The reference implementation uses a case-insensitive string
comparison for strings of equal length. This will cause the
string "tEo" to compare less than "VUo". However we were using
a case sensitive comparison, which would generate the opposite
outcome. Switch to a case insensitive comparison. Also, when
one of the strings contains non-ascii characters, fallback to
a straight memcmp.
The only way to really test this is with a DIA test. Before this
patch, the test will fail (but succeed if link.exe is used instead
of lld-link). After the patch, it succeeds even with lld-link.
llvm-svn: 336464
It seems like the debugger first computes a symbol's bucket,
and then does a binary search of entries in the bucket using the
symbol's name in order to find it. If the bucket entries are not
in sorted order, this obviously won't work. After this patch a
couple of simple test cases show that we generate an exactly
identical GSI hash stream, which is very nice.
llvm-svn: 336405
We have a function which switches on the type of a symbol record
to return a hardcoded offset into the record that contains the
symbol name. Not all symbols have names to begin with, and for
those records we return -1 for the offset.
Names are used for various things. Importantly for this particular
bug, a hash of the record name is used as a key for certain hash
tables which are serialied into the PDB file. One of these hash
tables is for the global symbol stream, which is basically a
collection of S_PROCREF symbols which contain the name of the
symbol, a module, and an address offset.
However, for S_PROCREF symbols, the function to return the offset
of the name was returning -1: basically it wasn't implemented.
As a result of this, all global symbols were hashing to the same
value, essentially it was as if every single global symbol's name
was the empty string.
This manifests in the VS debugger when you try to call a function
(global or member, doesn't matter) through the immediate window
and the debugger simply reports an error because it can't find the
function. This makes perfect sense, because it is hashing the name
for real, looking in the global symbol hash table, and there is only
1 entry there which corresponds to a symbol whose name is the empty
string.
Fixing this fixes the MSVC debugger in this case.
llvm-svn: 336024
The code to emit the pieces of the MSF file were actually in
PDBFileBuilder. Move this to MSFBuilder so that we can
theoretically emit an MSF without having a PDB file.
llvm-svn: 335789
Summary:
The NetBSD Operating System installs debuginfo
files into /usr/libdata/debug, rather than other path
like in some other popular distribution.
This change makes llvm-symbolizer functional with
the basesystem executables.
Reviewers: joerg, vitalybuka
Reviewed By: vitalybuka
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D48525
llvm-svn: 335511
Errors found processing the DW_AT_ranges attribute are propagated by lower level
routines and reported by their callers.
Reviewer: JDevlieghere
Differential Revision: https://reviews.llvm.org/D48344
llvm-svn: 335188
Summary:
This method was not correct for entries in DWO files as it assumed it
could just add up the CU and DIE offsets to get the absolute DIE offset.
This is not correct for the DWO files, as here the CU offset will
reference the skeleton unit, whereas the DIE offset will be the offset
in the full unit in the DWO file.
Unfortunately, this means that we are not able to determine the absolute
DIE offset using the information in the .debug_names section alone,
which means we have to offload some of this work to the users of this
class.
To demonstrate how this can be done, I've added/fixed the ability to
lookup entries using accelerator tables in DWO files in llvm-dwarfdump.
To make this happen, I've needed to make two extra changes in other
classes:
- made the DWARFContext method to lookup a CU based on the section
offset public. I've needed this functionality to lookup a CU, and this
seems like a useful thing in general.
- made DWARFUnit::getDWOId call extractDIEsIfNeeded. Before this, the
DWOId was filled in only if the root DIE happened to be parsed
before we called the accessor. Since the lazy parsing is supposed to
happen under the hood, calling extractDIEsIfNeeded seems appropriate.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D48009
llvm-svn: 334578
Summary:
Back when we were introducing the DWARF v5 name index, there was a
short discussion whether we shouldn't have a nicer api for iterating
over the index. At that time, I did not find it necessary since the
iteration over names was done only from within the index itself (and I
figured the internal implementation can deal with a slightly rough
interface).
However, now I ran into a use for this kind of API in LLDB (for finding
all names matching a regular expression), so it looked like a nice
opportunity to introduce one. To make the API more useful, I've made the
NameTableEntry class a bit smarter: it now stores the string section
reference (so it can return its name) and its position in the name index
(mainly useful for dumping/logging).
I also convert the internal users to use the new API, which also gives
test coverage for the added code.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D47590
llvm-svn: 333738
Summary:
Both (Apple and DWARF5) implementations of the iterators had bugs which
resulted in crashes if one attempted to iterate through the accelerator
tables all the way.
For the Apple tables, the issue was that we did not clear the DataOffset
field when we reached the end, which made our iterator compare unequal
to the "end" iterator. For the Dwarf5 tables, the problem was that we
incremented the CurrentIndex pointer and then used the incremented
(possibly invalid) pointer to check whether we have reached the end of
the index list.
The reason these bugs went undetected is because their only user
(dwarfdump) only ever searched for the first match. Besides allowing us
to test this fix, changing llvm-dwarfdump --find to display all matches
seems like a good improvement (it makes the behavior consistent with the
--name option), so I change llvm-dwarfdump to do that.
The existing tests would be sufficient to test this fix with the new
llvm-dwarfdump behavior, but I add a special test that demonstrates that
the tool indeed displays multiple results. The find.test test needed to
be tweaked a bit as the tool now does not print the ".debug_info
contents" header (also consistent with how --name works).
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: mgrang, llvm-commits
Differential Revision: https://reviews.llvm.org/D47543
llvm-svn: 333635
When requesting to dump both the parent chain and children, we used to
print the DIE more than once because we propagated the dump options to
the parent without clearing the respective flags. This commit fixes this
oversight and adds a test.
rdar://39415292
Differential revision: https://reviews.llvm.org/D47263
llvm-svn: 333350
When printing an error for an invalid address range in a DIE, we used to
print the child above the parent, which is counter intuitive. This patch
reverses the order and indents the child to mimic the way we print the
debug info section.
llvm-svn: 333006
In DWARF v5, the DWO ID is in the (split/skeleton) CU header, not an
attribute on the CU DIE.
This changes the size of those headers, so use the parsed size whenever
we have one, for simplicitly.
Differential Revision: https://reviews.llvm.org/D47158
llvm-svn: 333004
Rather than relying on the user to do the address calculating in
DW_AT_location we should just dump the absolute address.
rdar://problem/38513870
Differential revision: https://reviews.llvm.org/D47152
llvm-svn: 332873
Change the "recoverable" error callback to take an Error instaed of a
string.
Reviewed by: JDevlieghere
Differential Revision: https://reviews.llvm.org/D46831
llvm-svn: 332845
Previously we emitted 20-byte SHA1 hashes. This is overkill
for identifying debug info records, and has the negative side
effect of making object files bigger and links slower. By
using only the last 8 bytes of a SHA1, we get smaller object
files and ~10% faster links.
This modifies the format of the .debug$H section by adding a new
value for the hash algorithm field, so that the linker will still
work when its object files have an old format.
Differential Revision: https://reviews.llvm.org/D46855
llvm-svn: 332669
The prefix includes type kind, which is important to preserve. Two
different type leafs can easily have the same interior record contents
as another type.
We ran into this issue in PR37492 where a bitfield type record collided
with a const modifier record. Their contents were bitwise identical, but
their kinds were different.
llvm-svn: 332664
This is a resubmit of r331868 (D46583), which was reverted due to
failures on the PS4 bot.
These have been resolved with r332246/D46748.
llvm-svn: 332349
Extract information related to a "unit header" from DWARFUnit into a
new DWARFUnitHeader class, and add a DWARFUnit member for the header.
This is one step in the direction of allowing type units in the
.debug_info section for DWARF v5.
Differential Revision: https://reviews.llvm.org/D46707
llvm-svn: 332289
Summary:
If we are not emitting a linkage name in the .debug_info sections, we
should not add it into the index either. This makes sure our index is
consistent with the actual debug info.
I am also explicitly setting the --dwarf-linkage-names=All in the
name-collsions test as that one would now fail on targets where this
defaults to "Abstract" (in fact, it would have failed already if there
wasn't a bug in the DWARF verifier, which I fix as well).
Reviewers: probinson, aprantl, JDevlieghere
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46748
llvm-svn: 332246
length excluding the table header. Instead it must encode the contribution length minus the length
field itself.
Reviewer: JDevliegehere
Differential Revision: https://reviews.llvm.org/D45922
llvm-svn: 332030
The print format was causing at least 2 unit-test failures from r331971.
The signed/unsigned comparison warnings only appeared to affect two lines but
it was unclear whether it might just pop up on other lines, so I have been
explicit in all the literals in the tests.
There were other bot unit-test failures that I am still investigating.
llvm-svn: 331978
Reviewed by: dblaikie, JDevlieghere, espindola
Differential Revision: https://reviews.llvm.org/D44560
Summary:
The .debug_line parser previously reported errors by printing to stderr and
return false. This is not particularly helpful for clients of the library code,
as it prevents them from handling the errors in a manner based on the calling
context. This change switches to using llvm::Error and callbacks to indicate
what problems were detected during parsing, and has updated clients to handle
the errors in a location-specific manner. In general, this means that they
continue to do the same thing to external users. Below, I have outlined what
the known behaviour changes are, relating to this change.
There are two levels of "errors" in the new error mechanism, to broadly
distinguish between different fail states of the parser, since not every
failure will prevent parsing of the unit, or of subsequent unit. Malformed
table errors that prevent reading the remainder of the table (reported by
returning them) and other minor issues representing problems with parsing that
do not prevent attempting to continue reading the table (reported by calling a
specified callback funciton). The only example of this currently is when the
last sequence of a unit is unterminated. However, I think it would be good to
change the handling of unrecognised opcodes to report as minor issues as well,
rather than just printing to the stream if --verbose is used (this would be a
subsequent change however).
I have substantially extended the DwarfGenerator to be able to handle
custom-crafted .debug_line sections, allowing for comprehensive unit-testing
of the parser code. For now, I am just adding unit tests to cover the basic
error reporting, and positive cases, and do not currently intend to test every
part of the parser, although the framework should be sufficient to do so at a
later point.
Known behaviour changes:
- The dump function in DWARFContext now does not attempt to read subsequent
tables when searching for a specific offset, if the unit length field of a
table before the specified offset is a reserved value.
- getOrParseLineTable now returns a useful Error if an invalid offset is
encountered, rather than simply a nullptr.
- The parse functions no longer use `WithColor::warning` directly to report
errors, allowing LLD to call its own warning function.
- The existing parse error messages have been updated to not specifically
include "warning" in their message, allowing consumers to determine what
severity the problem is.
- If the line table version field appears to have a value less than 2, an
informative error is returned, instead of just false.
- If the line table unit length field uses a reserved value, an informative
error is returned, instead of just false.
- Dumping of .debug_line.dwo sections is now implemented the same as regular
.debug_line sections.
- Verbose dumping of .debug_line[.dwo] sections now prints the prologue, if
there is a prologue error, just like non-verbose dumping.
As a helper for the generator code, I have re-added emitInt64 to the
AsmPrinter code. This previously existed, but was removed way back in r100296,
presumably because it was dead at the time.
This change also requires a change to LLD, which will be committed separately.
llvm-svn: 331971
The new verifier check has found an error in the
debug-names-name-collisions.ll test on the PS4 bot:
error: Name Index @ 0x0: Entry @ 0xdc: mismatched Name of DIE @ 0x23: index - _ZN3foo3fooE; debug_info - foo.
Reverting while I investigate whether this is a bug in the verifier or
the generator.
This reverts commit r331868.
llvm-svn: 331869
Summary:
This patch implements a check which makes sure all entries required by
the DWARF v5 specification are present in the Name Index. The algorithm
tries to follow the wording of Section 6.1.1.1 of the spec as closely as
possible.
The main deviation from it is that instead of a whitelist-based approach
in the spec "The name index must contain an entry for each debugging
information entry that defines a named subprogram, label, variable,
type, or namespace" I chose a blacklist-based one, where I consider
everything to be "in" and then remove the entries that don't make sense.
I did this because it has more potential for catching interesting cases
and the above is a bit vague (it uses plain words like "variable" and
"subprogram", but the rest of the section speaks about specific TAGs).
This approach has raised some interesting questions, the main one being
whether enumerator values should be indexed. The consensus seems to be
that they should, although it does not follow from section 6.1.1.1.
For the time being I made the verifier ignore these, as LLVM does not do
this yet, and I wanted to get a clean run when verifying generated debug
info.
Another interesting case was the DW_TAG_imported_declaration. It was not
immediately clear to me whether this should go in or not, but currently
it is not indexed, and (unlike the enumerators) in does not seem to cause
problems for LLDB, so I've also ignored it.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46583
llvm-svn: 331868
LLVM always puts function definition DIEs at the top level, but under
some circumstances GCC does not (at least in this case with member
functions of a function-local type).
To ensure that doesn't appear as though the local type's member function
is unduly inlined within the outer function - ensure the inline
discovery DIE parent walk stops at the first DW_TAG_subprogram.
llvm-svn: 331291
This prevents infinite recursion in DWARFDie::findRecursively for
malformed DWARF where a DIE references itself.
This fixes PR36257.
Differential revision: https://reviews.llvm.org/D43092
llvm-svn: 331200
Part of the DBI stream is a list of variable length structures
describing each module that contributes to the final executable.
One member of this structure is a section contribution entry that
describes the first section contribution in the output file for
the given module.
We have been leaving this structure unpopulated until now, so with
this patch it is now filled out correctly.
Differential Revision: https://reviews.llvm.org/D45832
llvm-svn: 330457
Updated two more debug line related warnings to use WithColor. This was
necessary to ensure consistent output order of the warnings on Windows
for debug line tests.
Differential Revision: https://reviews.llvm.org/D45871
llvm-svn: 330440
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
Using Config->is64() will treat ARM64 as Amd64, which is incorrect.
Furthermore, there are more esoteric architectures that could
theoretically be encountered. Just set it directly to the machine
type, which we already know anyway.
llvm-svn: 330157
When emitting CodeView debug information, compiler-generated thunk routines
should be emitted using S_THUNK32 symbols instead of S_GPROC32_ID symbols so
Visual Studio can properly step into the user code. This initial support only
handles standard thunk ordinals.
Differential Revision: https://reviews.llvm.org/D43838
llvm-svn: 330132
Most of these are pretty trivial and obvious. Setting the toolchain
version to 14.11 is perhaps a little questionable, but we've been bitten
in the past where one of our version fields sidn't match MSVC's, and I
definitely don't want to go through that diagnosis again as it was
pretty time consuming and hard to track down.
I found all of these by using llvm-pdbutil export to dump the dbi and
pdb streams to a file, then using fc followed by llvm-pdbutil explain to
explain the mismatched bytes.
There are still some more, these are just the low hanging fruit.
Differential Revision: https://reviews.llvm.org/D45276
llvm-svn: 330130
r327219 added wrappers to std::sort which randomly shuffle the container before
sorting. This will help in uncovering non-determinism caused due to undefined
sorting order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of
std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to
llvm::sort. Refer the comments section in D44363 for a list of all the
required patches.
llvm-svn: 330061
While reading Codeview records which contain variable-length encoded integers,
such as LF_BCLASS, LF_ENUMERATE, LF_MEMBER, LF_VBCLASS or LF_IVBCLASS,
the record's size would be improperly calculated in cases where the value was
indeed of a variable length (>= LF_NUMERIC). This caused a bad alignement on
the next record, which would/might crash later on.
Differential Revision: https://reviews.llvm.org/D45104
llvm-svn: 329659
Summary:
This patch add checks to verify that the information in the name index
entries is consistent with the debug_info section. Specifically, we
check that entries point to valid DIEs, and their names, tags, and
compile units match the information in the debug_info sections.
These checks are only run if the previous checks did not find any errors
in the name index headers. Attempting to proceed with the checks anyway
would likely produce a lot of spurious errors and the verification code
would need to be very careful to avoid crashing.
I also add a couple of more checks to the abbreviation-validation code
to verify that some attributes are always present (an index without a
DW_IDX_die_offset attribute is fairly useless).
The entry verification works only on indexes without any type units - I
haven't attempted to extend it to type units, as we don't even have a
DWARF v5-compatible type unit generator at the moment.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45323
llvm-svn: 329392
Summary:
The positions of the DwarfVersion and AddressSize arguments were
reversed, which caused parsing for dwarf opcodes which contained
address-size-dependent operands (such as DW_OP_addr). Amusingly enough,
none of the address-size asserts fired, as dwarf version was always 4,
which is a valid address size.
I ran into this when constructing weird inputs for the DWARF verifier. I
I add a test case as hand-written dwarf -- I am not sure how to trigger
this differently, as having a DW_OP_addr inside a location list is a
fairly non-standard thing to do.
Fixing this error exposed a bug in the debug_loc.dwo parser, which was
always being constructed with an address size of 0. I fix that as well
by following the pattern in the non-dwo parser of picking up the address
size from the first compile unit (which is technically not correct, but
probably good enough in practice).
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45324
llvm-svn: 329381
Using this, you can use llvm-pdbutil to export the contents of a
stream to a binary file, then run explain on the binary file so
that it treats the offset as an offset into the stream instead
of an offset into a file. This makes it easy to compare the
contents of the same stream from two different files.
llvm-svn: 329207
The missing definitions are from cvconst.h shipped with DIA SDK.
Correct the url to MSDN for MemoryTypeEnum and set the underlying
type of PDB_StackFrameType and PDB_MemoryType to uint16_t.
llvm-svn: 329104
This command can dump the binary contents of a stream to a file.
This is useful when you want to do side-by-side comparisons of
a specific stream from two PDBs to examine the differences between
them. You can export both of them to a file, then open them up
side by side in a hex editor (for example), so as to eliminate any
differences that might arise from the contents being on different
blocks in the PDB.
In subsequent patches I plan to improve the "explain" subcommand
so that you can explain the contents of a binary file that isn't
necessarily a full PDB, but one of these dumped streams, by telling
the subcommand how to interpret the contents.
llvm-svn: 329002
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: echristo, zturner, samsonov
Reviewed By: echristo
Subscribers: JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45134
llvm-svn: 328935
This will show more detail when using `llvm-pdbutil explain` on an
offset in the DBI or PDB streams. Specifically, it will dig into
individual header fields and substreams to give a more precise
description of what the byte represents.
llvm-svn: 328878
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
llvm-svn: 328812
We should align the value of the field, not the overall section offset.
This distinction matters if one of the debug_names contributions is not
of size which is a multiple of four. The dwarf producers may choose to
emit rounded contributions, but they are not required to do so. In the
latter case, without this patch we would corrupt the parsing state, as
we would adjust the offset even if subsequent contributions contained
correctly rounded augmentation strings.
llvm-svn: 328796
Before this patch we were parsing the attributes as section offsets, as
that is what apple_names is doing. However, this is not correct as DWARF
v5 specifies that this attribute should use the Reference form class.
This also updates all the testcases (except the ones that deliberately
pass a different form) to use the correct form class.
llvm-svn: 328773
Before this change, using dumpProperties() with PDBSymbolData
would look like this:
get_locationType: 3
1
After this change:
get_locationType: 3
get_value: 1
llvm-svn: 328590
This was reverted several times due to what ultimately turned out
to be incompatibilities in our serialized hash table format.
Several changes went in prior to this to fix those issues since
they were more fundamental and independent of supporting injected
sources, so now that those are fixed this change should hopefully
pass.
llvm-svn: 328363
When investigating bugs in PDB generation, the first step is
often to do the same link with link.exe and then compare PDBs.
But comparing PDBs is hard because two completely different byte
sequences can both be correct, so it hampers the investigation when
you also have to spend time figuring out not just which bytes are
different, but also if the difference is meaningful.
This patch fixes a couple of cases related to string table emission,
hash table emission, and the order in which we emit strings that
makes more of our bytes the same as the bytes generated by MS PDBs.
Differential Revision: https://reviews.llvm.org/D44810
llvm-svn: 328348
NFC, this just renames some methods to better express what they
do, and also adds a few helper methods to add some symmetry to the
API in a few places (for example there was a getStringFromId but not
a getIdFromString method in the string table).
llvm-svn: 328221
Summary:
This commit adds checks of the abbreviation table in a DWARF v5 Name
Index. The most interesting/useful check is the one which checks that
each index attributes is encoded using the correct form class, but it
also checks for the more obvious errors like unknown
forms/tags/attributes and duplicated attributes.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44736
llvm-svn: 328202
To resolve symbol context at a particular address, we need to
determine the compiland for the address. We are able to determine
the parent compiland of PDBSymbolFunc, PDBSymbolTypeUDT,
PDBSymbolTypeEnum symbols indirectly through line information.
However no such information is availabile for PDBSymbolData,
i.e. variables.
The Section Contribution table from PDBs has information about
each compiland's contribution to sections by address. For example,
a piece of a contribution looks like,
VA RelativeVA Sect No. Offset Length Compiland
14000087B0 000087B0 0001 000077B0 000000BB exe_main.obj
So given an address, it's possible to determine its compiland with
this information.
llvm-svn: 328178
The hash table is a list of buckets, and the *value* stored in
the bucket cannot be 0 since that is reserved. However, the code
here was incorrectly skipping over the 0'th bucket entirely.
The 0'th bucket is perfectly fine, just none of these buckets
can contain the value 0.
As a result, whenever there was a string where hash(S) % Size
was equal to 0, we would write the value in the next bucket
instead. We never caught this in our tests due to *another*
bug, which is that we would iterate the entire list of buckets
looking for the value, only using the hash value as a starting
point. However, the real algorithm stops when it finds 0 in
a bucket since it takes that to mean "the item is not in the
hash table".
The unit test is updated to carefully construct a set of hash
values that will cause one item to hash to 0 mod bucket count,
and the reader is also updated to return an error indicating that
the item is not found when it encounters a 0 bucket.
llvm-svn: 328162
This is mostly just plumbing to get a DWARFDataExtractor where we
compute abbr_offset so we can use getRelocatedValue.
This is part of PR36793.
llvm-svn: 328154
Summary:
We have had at least three pieces of code (in DWARFAbbreviationDeclaration,
DWARFAcceleratorTable and DWARFDie) that have hand-rolled support for
dumping unknown dwarf enum values. While not terrible, they are a bit
distracting and enable small differences to creep in (Unknown_ffff vs.
Unknown_0xffff). I ended up needing to add a fourth place
(DWARFVerifier), so it seems it would be a good time to centralize.
This patch creates an alternative to the XXXString dumping functions in
the BinaryFormat library, which formats an unknown value as
DW_TYPE_unknown_1234, instead of just an empty string. It is based on
the formatv function, as that allows us to avoid materializing the
string for unknown values (and because this way I don't have to invent a
name for the new functions :P).
In this patch I add formatters for dwarf attributes, forms, tags, and
index attributes as these are the ones in use currently, but adding
other enums is straight-forward.
Reviewers: dblaikie, JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44570
llvm-svn: 328090
This is still failing on a different bot this time due to some
issue related to hashing absolute paths. Reverting until I can
figure it out.
llvm-svn: 328014
The issue causing this to fail in certain configurations
should be fixed.
It was due to the fact that DIA apparently expects there to be
a null string at ID 1 in the string table. I'm not sure why this
is important but it seems to make a difference, so set it.
llvm-svn: 328002
Summary:
Redefine PDBSymbolCompiland::getSourceFileName() to return the filename (w/o directory) of the source file that is used to compile the compiland. This is because the result returned previously is ambiguous. It could be the filename, relative path or full path of the source file.
Move the implementation of SymbolFilePDB::GetSourceFileNameForPDBCompiland() into a new method PDBSymbolCompiland::getSourceFileFullPath().
Reviewers: zturner, rnk, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D44458
llvm-svn: 327910
Summary: This commit adds two methods to the PDBSymboFunc class used in parsing symbols. getLineNumbers() is used to determine a Function symbol's declaration and getCompilandId() is used to initialize the SymbolContext field sc.comp_unit.
Reviewers: zturner, rnk, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D44457
llvm-svn: 327909
Natvis is a debug language supported by Visual Studio for
specifying custom visualizers. The /NATVIS option is an
undocumented link.exe flag which will take a .natvis file
and "inject" it into the PDB. This way, you can ship the
debug visualizers for a program along with the PDB, which
is very useful for postmortem debugging.
This is implemented by adding a new "named stream" to the
PDB with a special name of /src/files/<natvis file name>
and simply copying the contents of the xml into this file.
Additionally, we need to emit a single stream named
/src/headerblock which contains a hash table of embedded
files to records describing them.
This patch adds this functionality, including the /NATVIS
option to lld-link.
Differential Revision: https://reviews.llvm.org/D44328
llvm-svn: 327895
Summary:
This patch adds more checks to the .debug_names validator. Specifically,
they check for:
- buckets claiming to be non-empty but pointing to mismatched hashes
(most consumers would interpret this as an empty bucket, but it
questionable whether the generator meant that)
- hashes that are not reachable from any bucket
- names with incorrect hashes
Together, these checks ensure that any name in the index can be reached
through the hash table using the regular lookup algorithm. We also warn
if we encounter a name index without a hash table.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44433
llvm-svn: 327699
There was some code that tried to calculate the number of 4-byte
words required to hold N bits, but it was instead computing the
number of bytes required to hold N bits. This was leading to
extraneous data being output into the hash table, which would
cause certain operations in DIA (the Microsoft PDB reader) to
fail.
llvm-svn: 327675
It previously only worked when the key and value types were
both 4 byte integers. We now have a use case for a non trivial
value type, so we need to extend it to support arbitrary value
types, which means templatizing it.
llvm-svn: 327647
Summary:
Some PDB symbols do not have a valid VA or RVA but have Addr by Section and Offset. For example, a variable in thread-local storage has the following properties:
get_addressOffset: 0
get_addressSection: 5
get_lexicalParentId: 2
get_name: g_tls
get_symIndexId: 12
get_typeId: 4
get_dataKind: 6
get_symTag: 7
get_locationType: 2
This change provides a new method to locate line numbers by Section and Offset from those symbols.
Reviewers: zturner, rnk, llvm-commits
Subscribers: asmith, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44407
llvm-svn: 327601
Summary:
This patch replaces the two switches which are deducing the size of
various forms with a single implementation. I have put the new
implementation into BinaryFormat, to avoid introducing dependencies
between the two independent libraries (DebugInfo and CodeGen) that need
this functionality.
Reviewers: aprantl, JDevlieghere, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D44418
llvm-svn: 327486
Make sure that DWARF line information generated by Windows can be properly read by Posix OS and vice versa.
Differential Revision: https://reviews.llvm.org/D44290
llvm-svn: 327430
Injected sources are basically a way to add actual source file content
to your PDB. Presumably you could use this for shipping your source code
with your debug information, but in practice I can only find this being
used for embedding natvis files inside of PDBs.
In order to effectively test LLVM's natvis file injection, we need a way
to dump the injected sources of a PDB in a way that is authoritative
(i.e. based on Microsoft's understanding of the PDB format, and not
LLVM's). To this end, I've added support for dumping injected sources
via DIA. I made a PDB file that used the /natvis option to generate a
test case.
Differential Revision: https://reviews.llvm.org/D44405
llvm-svn: 327428
Summary:
Even though the getDIEOffset offset function was common for the two
accelerator table implementations, it was doing two different things:
for the Apple tables, it was returning the die offset relative to the
start of the section, whereas for DWARF v5 tables, it was relative to
the start of the CU.
I resolve this by renaming the function to getDIESectionOffset to make
it obvious what the function returns, and change the DWARF
implementation to return the section offset. I also keep the CU-relative
accessor, but only in the DWARF implementation (there is no way to get
this information for the Apple tables). This was not caught by existing
tests because the hand-written inputs also erroneously used section
offsets instead of CU-relative ones.
While looking at this, I noticed that the Apple implementation was not
fully correct either -- the header contains a DIEOffsetBase field, which
should be added to offsets encoded with the DW_FORM_ref*** family, but
this was not being used. This went unnoticed because all current writers
set this field to zero anyway. I fix this as well and add a hand-written
test which demonstrates the issue.
Reviewers: JDevlieghere, dblaikie
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D44202
llvm-svn: 327116
Move the DWARF syntax highlighting into support. This has several
advantages, most notably that this makes the WithColor RAII wrapper
available outside libDebugInfo. Furthermore, several projects all have
their own code for handling colored output. This provides a place to
centralize it.
Differential revision: https://reviews.llvm.org/D44215
llvm-svn: 327108
Adding verbose dumping to the recent implementation of dumping of v5 range list entries.
We're capturing the entries as is as they come in during extraction, including their file offset,
so we can dump them in more detail.
The offset table entries which are table-relative are shown as is (as in non-verbose mode)
and with the actual file offset they map to.
Reviewers: dblaikie, aprantl, jdevlieghere, jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D43366
llvm-svn: 327059
Summary:
This patch adds basic .debug_names verification capabilities to the
DWARF verifier. Right now, it checks that the headers and abbreviation
tables of the individual name indexes can be parsed correctly, it
verifies the buckets table and the cross-checks the CU lists for
consistency. I intend to add further checks in follow-up patches.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: vleschuk, echristo, clayborg, llvm-commits
Differential Revision: https://reviews.llvm.org/D44211
llvm-svn: 327011
Whilst working on improvements to the error handling of the debug line
parsing code, I noticed that if an invalid offset were to be specified
in a call to getOrParseLineTable(), an entry in the LineTableMap would
still be created, even if the offset was not within the section range.
The immediate parsing attempt afterwards would fail (it would end up
getting a version of 0), and thereafter, any subsequent calls to
getOrParseLineTable or getLineTable would return the default-
constructed, invalid line table. In reality, we shouldn't even attempt
to parse this table, and we should always return a nullptr from these
two functions for this situation.
I have tested this via a unit test, which required some new framework
for unit testing debug line. My plan is to add quite a few more unit
tests for the new error reporting mechanism that will follow shortly,
hence the reason why the supporting code for the tests are written the
way they are - I intend to extend the DwarfGenerator class to support
generating debug line. At that point, I'll make sure that there are a
few positive test cases for this and the parsing code too.
Differential Revision: https://reviews.llvm.org/D44200
Reviewers: JDevlieghere, aprantl
llvm-svn: 326995
Summary:
Original change was D43313 (r326932) and reverted by r326953 because it
broke an LLD test and a windows build. The LLD test was already fixed in
lld commit r326944 (thanks maskray). This is the original change with
the windows build fixed.
llvm-svn: 326970
Currently on Windows (_MSC_VER) LLVMSymbolizer supports only Microsoft mangling.
This fix just explicitly uses itaniumDemangle when mangled name starts with _Z.
Differential Revision: https://reviews.llvm.org/D44192
llvm-svn: 326959
This patch enhances DWARFDebugFrame with the capability of parsing and
printing DWARF expressions in CFI instructions. It also makes FDEs and
CIEs accessible to lib users, so they can process them in client tools
that rely on LLVM. To make it self-contained with a test case, it
teaches llvm-readobj to be able to dump EH frames and checks they are
correct in a unit test. The llvm-readobj code is Maksim Panchenko's work
(maksfb).
Reviewers: JDevlieghere, espindola
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D43313
llvm-svn: 326932
Instead of only printing the CU-relative offset in non-verbose mode, it
makes more sense to only printed the resolved address. In verbose mode
we still print both.
Differential revision: https://reviews.llvm.org/D44148
rdar://33525475
llvm-svn: 326903
Summary: This helps to determine the line number for a PDB type with definition
Reviewers: zturner, llvm-commits, rnk
Reviewed By: zturner
Subscribers: rengolin, JDevlieghere
Differential Revision: https://reviews.llvm.org/D44119
llvm-svn: 326857
Summary:
The symbolizer was checking for .debug as a subdirectory of the
binary file itself, not of the directory containing the binary. This led to
a failure to find split debug info when it was contained in a .debug directory.
Reviewers: rnk, glider, zturner
Subscribers: llvm-commits, aprantl
Differential Revision: https://reviews.llvm.org/D44025
llvm-svn: 326630
For now this is NFC, but this small refactor opens the door to
letting us embed a hash of the PDB in the build id field of the
PDB.
Differential Revision: https://reviews.llvm.org/D43913
llvm-svn: 326453
Qualifiers on a pointer or reference type may apply to either the
pointee or the pointer itself. Consider 'const char *' and 'char *
const'. In the first example, the pointee data may not be modified
without casts, and in the second example, the pointer may not be updated
to point to new data.
In the general case, qualifiers are applied to types with LF_MODIFIER
records, which support the usual const and volatile qualifiers as well
as the __unaligned extension qualifier.
However, LF_POINTER records, which are used for pointers, references,
and member pointers, have flags for qualifiers applying to the
*pointer*. In fact, this is the only way to represent the restrict
qualifier, which can only apply to pointers, and cannot qualify regular
data types.
This patch causes LLVM to correctly fold 'const' and 'volatile' pointer
qualifiers into the pointer record, as well as adding support for
'__restrict' qualifiers in the same place.
Based on a patch from Aaron Smith
Differential Revision: https://reviews.llvm.org/D43060
llvm-svn: 326260
Summary:
This patch implements the name lookup functionality of the .debug_names
accelerator table and hooks it up to "llvm-dwarfdump -find". To make the
interface of the two kinds of accelerator tables more consistent, I've
created an abstract "DWARFAcceleratorTable::Entry" class, which provides
a consistent interface to access the common functionality of the table
entries (such as getting the die offset, die tag, etc.). I've also
modified the apple table to vend entries conforming to this interface.
Reviewers: JDevlieghere, aprantl, probinson, dblaikie
Subscribers: vleschuk, clayborg, echristo, llvm-commits
Differential Revision: https://reviews.llvm.org/D43067
llvm-svn: 326003
In DWARF v5 the Line Number Program Header is extensible, allowing values with
new content types. In this extension a content type is added,
DW_LNCT_LLVM_source, which contains the embedded source code of the file.
Add new optional attribute for !DIFile IR metadata called source which contains
source text. Use this to output the source to the DWARF line table of code
objects. Analogously extend METADATA_FILE in Bitcode and .file directive in ASM
to support optional source.
Teach llvm-dwarfdump and llvm-objdump about the new values. Update the output
format of llvm-dwarfdump to make room for the new attribute on file_names
entries, and support embedded sources for the -source option in llvm-objdump.
Differential Revision: https://reviews.llvm.org/D42765
llvm-svn: 325970
Verifying any DWARF file that is optimized and contains at least one tag
with a DW_AT_location with a location list offset as a
DW_AT_form_dataXXX results in dwarfdump spuriously claiming that the
location list is invalid.
Differential revision: https://reviews.llvm.org/D40199
llvm-svn: 325430
This was originally reported as a bug with the symptom being "cvdump
crashes when printing an LLD-linked PDB that has an S_FILESTATIC record
in it". After some additional investigation, I determined that this was
a symptom of a larger problem, and in fact the real problem was in the
way we emitted the global PDB string table. As evidence of this, you can
take any lld-generated PDB, run cvdump -stringtable on it, and it would
return no results.
My hypothesis was that cvdump could not *find* the string table to begin
with. Normally it would do this by looking in the "named stream map",
finding the string /names, and using its value as the stream index. If
this lookup fails, then cvdump would fail to load the string table.
To test this hypothesis, I looked at the name stream map generated by a
link.exe PDB, and I emitted exactly those bytes into an LLD-generated
PDB. Suddenly, cvdump could read our string table!
This code has always been hacky and we knew there was something we
didn't understand. After all, there were some comments to the effect of
"we have to emit strings in a specific order, otherwise things don't
work". The key to fixing this was finally understanding this.
The way it works is that it makes use of a generic serializable hash map
that maps integers to other integers. In this case, the "key" is the
offset into a buffer, and the value is the stream number. If you index
into the buffer at the offset specified by a given key, you find the
name. The underlying cause of all these problems is that we were using
the identity function for the hash. i.e. if a string's offset in the
buffer was 12, the hash value was 12. Instead, we need to hash the
string *at that offset*. There is an additional catch, in that we have
to compute the hash as a uint32 and then truncate it to uint16.
Making this work is a little bit annoying, because we use the same hash
table in other places as well, and normally just using the identity
function for the hash function is actually what's desired. I'm not
totally happy with the template goo I came up with, but it works in any
case.
The reason we never found this bug through our own testing is because we
were building a /parallel/ hash table (in the form of an
llvm::StringMap<>) and doing all of our lookups and "real" hash table
work against that. I deleted all of that code and now everything goes
through the real hash table. Then, to test it, I added a unit test which
adds 7 strings and queries the associated values. I test every possible
insertion order permutation of these 7 strings, to verify that it really
does work as expected.
Differential Revision: https://reviews.llvm.org/D43326
llvm-svn: 325386
Seeing some inlining missing in internal uses of symbolizer. I'll work
on a reproduction, tests, improvements & recommit as soon as possible.
(Chandler would like it to be known that this improvement did make
check-llvm 4x faster... - so there's certainly some fairly good
motivation to push on fixing/figuring this out & getting it back in)
This reverts commit r321345.
llvm-svn: 324981
Emitting the correct (root of compilation) file at index 0 will be
posted for review later; I wanted to get this minor change out of the
way first.
llvm-svn: 324669
The major visible difference here is that in line-table dumps,
directory and file names are wrapped in double-quotes; previously,
directory names got single quotes and file names were not quoted at
all.
The improvement in this patch is that when a DWARF v5 line table
header has indirect strings, in a verbose dump these will all have
their section[offset] printed as well as the name itself. This
matches the format used for dumping strings in the .debug_info
section.
Differential Revision: https://reviews.llvm.org/D42802
llvm-svn: 324270
This change adds support to llvm-dwarfdump for dumping DWARF5
.debug_rnglists sections in regular ELF files.
It is not complete, in that several DW_RLE_* encodings are currently
not supported, but does dump the headert and the basic ranges for
DW_RLE_start_length and DW_RLE_start_end encodings.
Obvious next steps are to add verbose dumping that dumps the raw
encodings, rather than the interpreted contents, to add -verify support
of the section (e.g. to show that the correct number of offsets are
specified), add dumping of .debug_rnglists.dwo, and to add support for
other encodings.
Reviewed by: dblaikie, JDevlieghere
Differential Revision: https://reviews.llvm.org/D42481
llvm-svn: 324077
Based on a profile, a couple of hot spots were identified in the
main type merging loop. The code was simplified, a few loops
were re-arranged, and some outlined functions were inlined. This
speeds up type merging by a decent amount, shaving around 3-4 seconds
off of a 40 second link in my test case.
Differential Revision: https://reviews.llvm.org/D42559
llvm-svn: 323790
r323476 added support for DW_FORM_line_strp, and incorrectly made that
depend on having a DWARFUnit available. We shouldn't be tracking
.debug_line_str in DWARFUnit after all. After this patch, I can do an
NFC follow up and undo a bunch of the "plumbing" part of r323476.
Differential Revision: https://reviews.llvm.org/D42609
llvm-svn: 323691
The test was failing because of an incorrect sizeof check in the name
index parsing code. This code was meant to check that we have enough
input to parse the fixed-size part of the dwarf header, which it did by
comparing the input to sizeof(Header). Originally struct Header only
contained the fixed-size part, but during review, we've moved additional
members into it, which rendered the sizeof check invalid.
I resolve this by moving the fixed-size part to a separate struct and
updating the sizeof-expression to use that.
llvm-svn: 323648
The call to ScopedPrinter::printNumber with size_t argument was
ambiguous (I think) on 32-bit builds. Explicitly cast to a 64-bit int to
avoid this.
llvm-svn: 323642
Summary:
This modifies the dwarfdump output to align it with the new .debug_names
dump. It also renames two header fields to match similar fields in the
dwarf5 header.
A couple of tests needed to be updated to match new output. The changes
were fairly straight-forward, although not really automatable.
Reviewers: JDevlieghere, aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42415
llvm-svn: 323641
Summary:
This commit renames DWARFAcceleratorTable to AppleAcceleratorTable to free up
the first name as an interface for the different accelerator tables.
Then I add a DWARFDebugNames class for the dwarf5 table.
Presently, the only common functionality of the two classes is the dump()
method, because this is the only method that was necessary to implement
dwarfdump -debug-names; and because the rest of the
AppleAcceleratorTable interface does not directly transfer to the dwarf5
tables (the main reason for that is that the present interface assumes
the tables are homogeneous, but the dwarf5 tables can have different
keys associated with each entry).
I expect to make the common interface richer as I add more functionality
to the new class (and invent a way to represent it in generic way).
In terms of sharing the implementation, I found the format of the two
tables sufficiently different to frustrate any attempts to have common
parsing or dumping code, so presently the implementations share just low
level code for formatting dwarf constants.
Reviewers: vleschuk, JDevlieghere, clayborg, aprantl, probinson, echristo, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42297
llvm-svn: 323638
This patch moves the DJB hash to support. This is consistent with other
hashing algorithms living there. The hash is used by the DWARF
accelerator tables. We're doing this now because the hashing function is
needed by dsymutil and we don't want to link against libBinaryFormat.
Differential revision: https://reviews.llvm.org/D42594
llvm-svn: 323616
Move standard forms from a switch statement to the table of forms;
fill in all the missing ones defined in DWARF v5. I'm guessing at
classifications in a couple of cases where v5 forms aren't actually
supported yet, but whoever adds support for the forms can fix the
classifications as needed.
llvm-svn: 323481
This form is like DW_FORM_strp, but points to .debug_line_str instead
of .debug_str as the string section. It's intended to be used from
the line-table header, and allows string-pooling of directory and
filenames across compilation units.
Differential Revision: https://reviews.llvm.org/D42553
llvm-svn: 323476
This frees up the first name to be used as an base class for the
apple table and the dwarf5 .debug_names accel table. The rename was
split off from D42297 (adding of debug_names support), which is still
under review.
llvm-svn: 323113
The compilation directory has always been #0, but as of DWARF v5 it is
explicitly listed in the line-table section instead of implicitly
being a reference to the compile_unit DIE's DW_AT_comp_dir attribute.
This means the dumper should number the dumped array starting with 0
or 1 depending on the DWARF version of the line table.
References in the generated DWARF are correct, it's just the dumper
that was wrong. Also some assembler-coded tests were similarly
confused about directory numbers.
llvm-svn: 322884
There's some abstraction overhead in the underlying
mechanisms that were being used, and it was leading to an
abundance of small but not-free copies being made. This
showed up on a profile. Eliminating this and going back to
a low-level byte-based implementation speeds up lld with
/DEBUG between 10 and 15%.
Differential Revision: https://reviews.llvm.org/D42148
llvm-svn: 322871
Summary:
- Fix a bug in PrettyBuiltinDumper that returns "void" as the name for
an unspecified builtin type. Since the unspecified param of a variadic
function is considered a builtin of unspecified type in PDBs, we set
"..." for its name.
- Provide a method to determine if a PDBSymbolFunc is variadic in
PrettyFunctionDumper since PDBSymbolFunc::getArgument() doesn't return the
last unspecified-type param.
- Add a pretty-func-dumper.test to test pretty dumping of variadic
functions.
Reviewers: zturner, llvm-commits
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D41801
llvm-svn: 322608
We have some code to try to determine how many pieces an MSF
Free Page Map is split into, and this code had an off by one
error which would cause the calculation to be incorrect when
there were exactly 4096*k + 1 blocks in an MSF file.
Original investigation and patch outline by Colden Cullen.
Differential Revision: https://reviews.llvm.org/D41742
llvm-svn: 321880
inlined subroutines for a given address.
This is essentially the hot path of llvm-symbolizer when extracting
inlined frames during symbolization. Previously, we would read every
subprogram and every inlined subroutine, building a std::map across the
entire PC space to the best DIE, and then do only a handful of queries
as we symbolized a backtrace. A huge fraction of the time was spent
building the map itself.
This patch changes it two a two-level system. First, we just build a map
from PC-interval to DWARF subprograms. These are required to be disjoint
and so constructing this is pretty easy. Second, we build a map *just*
for the inlined subroutines within the subprogram containing the query
address. This allows us to look at far fewer DIEs and build a *much*
smaller set of cached maps in the llvm-symbolizer case where only a few
address get symbolized during the entire run.
It also builds both interval maps in a very different way. It constructs
a single flat vector of pairs that maps from offset -> index. The
indices point into collections of DIE objects, but can also be
"tombstones" (-1) to mark gaps. In the case of subprograms, this mostly
just simplifies the data structure a bit. For inlined subroutines,
because we carefully split them as we build the map, we end up in many
cases having no holes and not having to store both start and stop
offsets.
Finally, the PC ranges for the inlined subroutines are compressed into
32-bits by making them relative to the base PC of the outer subprogram.
This means that if you have a single function body with over 2gb of
executable code in it, we will stop mapping address past the first 2gb
of that function into inlined subroutines and just give you the
subprogram. This doesn't seem like a problem. ;]
All of this combines to make llvm-symbolizer *well* over 2x faster for
symbolizing backtraces out of LLVM's unittests. Death-test heavy unit
tests are running >2x faster. I'm still going to look at completely
disabling symbolization there, but figured while I had a good benchmark
we should make symbolization a bit better.
Sadly, the logic to build the flat interval map for the inlined
subroutines is fairly complex. I'm not super happy about this and
welcome any simplifying suggestions.
Huge thanks to Dave Blaikie who helped walk me through what the various
things I needed to do in DWARF to make this work.
Differential Revision: https://reviews.llvm.org/D40987
llvm-svn: 321345
Reorganizes the DWARF consumer to derive the string offsets table
contribution's format from the contribution header instead of
(incorrectly) from the unit's format.
Reviewers: JDevliegehere, aprantl
Differential Revision: https://reviews.llvm.org/D41146
llvm-svn: 321295
Adds missing support for DW_FORM_data16.
Update of r320852/r320886, fixing the unittest again, this time use a
raw char string for the test data.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 321011
Adds missing support for DW_FORM_data16.
Update of r320852, fixing the unittest to use a hand-coded struct
instead of std::array to guarantee data layout.
Differential Revision: https://reviews.llvm.org/D41090
llvm-svn: 320886
This adds the /DEBUG:GHASH option to LLD which will look for
the existence of .debug$H sections in linker inputs and use them
to accelerate type merging. The clang-cl side has already been
added, so this completes the work necessary to begin experimenting
with this feature.
Differential Revision: https://reviews.llvm.org/D40980
llvm-svn: 320719
Currently this is an LLVM extension to the COFF spec which is
experimental and intended to speed up linking. For now it is
behind a hidden cl::opt flag, but in the future we can move it
to a "real" cc1 flag and have the driver pass it through whenever
it is appropriate.
The patch to actually make use of this section in lld will come
in a followup.
Differential Revision: https://reviews.llvm.org/D40917
llvm-svn: 320649
This fixes a bug where the verifier was complaining about empty
accelerator tables. When the table is empty, its size is not a valid
offset as it points after the end of the section.
This patch also makes the extractor return llvm:Error instead of bool
for better error reporting in the verifier.
Differential revision: https://reviews.llvm.org/D41063
rdar://35932007
llvm-svn: 320399
Previously, when linking against libcmt from the MSVC runtime,
lld-link /verbose would show "Ignoring unknown symbol record
with kind 0x1006". It turns out this was because
TypeIndexDiscovery did not handle S_REGISTER records, so these
records were not getting properly remapped.
Patch by: Alexnadre Ganea
Differential Revision: https://reviews.llvm.org/D40919
llvm-svn: 320108
Currently nothing uses this, but this at least gets the core
algorithm in, and adds some test to demonstrate correctness.
Differential Revision: https://reviews.llvm.org/D40736
llvm-svn: 319854
This was storing the hash alongside the key so that the hash
doesn't need to be re-computed every time, but in doing so it
was allocating a structure to keep the key size small in the
DenseMap. This is a noble goal, but it also leads to a pointer
indirection on every probe, and this cost of this pointer
indirection ends up being higher than the cost of having a
slightly larger entry in the hash table. Removing this not only
simplifies the code, but yields a small but noticeable
performance improvement in the type merging algorithm.
llvm-svn: 319493
This class had some code that would automatically remap type
indices before hashing and serializing. The only caller of
this method was the TypeStreamMerger anyway, and the method
doesn't make general sense, and prevents making certain future
improvements to the class. So, factoring this up one level
into the TypeStreamMerger where it belongs.
llvm-svn: 319377
A couple of places in LLD were passing references to
TypeTableCollections around, which makes it hard to change the
implementation at runtime. However, these cases only needed to
iterate over the types in the collection, and TypeCollection
already provides a handy abstract interface for this purpose.
By implementing this interface, we can get rid of the need to
pass TypeTableBuilder references around, which should allow us
to swap the implementation at runtime in subsequent patches.
llvm-svn: 319345
The motivation behind this patch is that future directions require us to
be able to compute the hash value of records independently of actually
using them for de-duplication.
The current structure of TypeSerializer / TypeTableBuilder being a
single entry point that takes an unserialized type record, and then
hashes and de-duplicates it is not flexible enough to allow this.
At the same time, the existing TypeSerializer is already extremely
complex for this very reason -- it tries to be too many things. In
addition to serializing, hashing, and de-duplicating, ti also supports
splitting up field list records and adding continuations. All of this
functionality crammed into this one class makes it very complicated to
work with and hard to maintain.
To solve all of these problems, I've re-written everything from scratch
and split the functionality into separate pieces that can easily be
reused. The end result is that one class TypeSerializer is turned into 3
new classes SimpleTypeSerializer, ContinuationRecordBuilder, and
TypeTableBuilder, each of which in isolation is simple and
straightforward.
A quick summary of these new classes and their responsibilities are:
- SimpleTypeSerializer : Turns a non-FieldList leaf type into a series of
bytes. Does not do any hashing. Every time you call it, it will
re-serialize and return bytes again. The same instance can be re-used
over and over to avoid re-allocations, and in exchange for this
optimization the bytes returned by the serializer only live until the
caller attempts to serialize a new record.
- ContinuationRecordBuilder : Turns a FieldList-like record into a series
of fragments. Does not do any hashing. Like SimpleTypeSerializer,
returns references to privately owned bytes, so the storage is
invalidated as soon as the caller tries to re-use the instance. Works
equally well for LF_FIELDLIST as it does for LF_METHODLIST, solving a
long-standing theoretical limitation of the previous implementation.
- TypeTableBuilder : Accepts sequences of bytes that the user has already
serialized, and inserts them by de-duplicating with a hash table. For
the sake of convenience and efficiency, this class internally stores a
SimpleTypeSerializer so that it can accept unserialized records. The
same is not true of ContinuationRecordBuilder. The user is required to
create their own instance of ContinuationRecordBuilder.
Differential Revision: https://reviews.llvm.org/D40518
llvm-svn: 319198
The previous implementation would only look 1 DW_AT_specification or DW_AT_abstract_origin deep. This means DWARFDie::getName() would fail in certain cases. I ran into such a case while creating a tool that used the LLVM DWARF parser to generate a symbolication format so I have seen this in the wild.
Differential Revision: https://reviews.llvm.org/D40156
llvm-svn: 319104
The existing library assumed that a stream's length would never
change. This makes some things simpler, but it's not flexible
enough for what we need, especially for writable streams where
what you really want is for each call to write to actually append.
llvm-svn: 319070
DWARF4 relative DW_AT_high_pc values are now displayed as absolute
addresses. The relative value is only shown when explicitly dumping the
forms, i.e. in show-form or verbose mode.
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x00000019)
```
becomes
```
DW_AT_low_pc (0x0000000000000049)
DW_AT_high_pc (0x0000000000000062)
```
Differential revision: https://reviews.llvm.org/D40317
rdar://35416943
llvm-svn: 319044
As a side effect, the .debug_line section will be dumped in physical
order, rather than in the order that compile units refer to their
associated portions of the .debug_line section. These are probably
always the same order anyway, and no tests noticed the difference.
Differential Revision: https://reviews.llvm.org/D39854
llvm-svn: 318839
It turns out this #include isn't used from Host.h anyway,
but by having it it causes circular include dependencies.
This issues only surfaced while I was working on a separate
patch, so I'm submitting this first so that it's independent
of the other, unrelated patch.
llvm-svn: 318489
Initial changes to support debugging PE/COFF files with LLDB on Windows through DIA SDK.
There is another set of changes required on the LLDB side before this does anything.
Differential Revision: https://reviews.llvm.org/D39517
llvm-svn: 318403
Patch improves next things:
* Fixes assert/crash in getOpDesc when giving it a invalid expression op code.
* DWARFExpression::print() called DWARFExpression::Operation::getEndOffset() which
returned and used uninitialized field EndOffset. Patch fixes that.
* Teaches verifier to verify DW_AT_location and error out on broken expressions.
Differential revision: https://reviews.llvm.org/D39294
llvm-svn: 316756
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 316619
This fixes possible out of bound access in
DWARFDie::getFirstChild()
which might happen when .debug_info section is corrupted,
like shown in testcase.
Differential revision: https://reviews.llvm.org/D39185
llvm-svn: 316566
The type index is from the TPI stream, not the IPI stream. Fix the
dumper, fix type index discovery, and add a test in LLD.
Also improve the log message we emit when we fail to rewrite type
indices in LLD. That's how I found this bug.
llvm-svn: 316461
This adds type index discovery and dumper support for symbol record kind
0x1168, which is a list of inlined function ids. This symbol kind is
undocumented, but S_INLINEES is consistent with the existing
nomenclature.
Fixes PR34222
llvm-svn: 316398
Currently llvm-dwarfdump runs into llvm_unreachable when
faces DW_CFA_GNU_args_size. Patch implements the support.
Differential revision: https://reviews.llvm.org/D38879
llvm-svn: 315897
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Recommit after being reverted in r315299.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315316
This patch adds printing for DW_AT_type DIEs like it is already the case
for DW_AT_specification DIEs. This is a rather naive approach and only a
start. We should have pretty printers for different languages.
Differential revision: https://reviews.llvm.org/D36993
llvm-svn: 315297
This patch adds two new verifiers:
- It checks that the root DIE of a CU is actually a valid unit DIE.
(based on its tag)
- For DWARF5 which contains a unit type int he CU header, it checks that
this matches the type of the unit DIE.
Differential revision: https://reviews.llvm.org/D38453
llvm-svn: 315121
The test fails on Linux; see follow-up email on the llvm-commits list.
> Add the option to lookup an address in the debug information and print
> out the file, function, block and line table details.
>
> Differential revision: https://reviews.llvm.org/D38409
This also reverts the follow-up r314818:
> [test] Fix llvm-dwarfdump/cmdline.test
>
> Fixes test/tools/llvm-dwarfdump/cmdline.test
llvm-svn: 314825
The list of register ids was previously written out in a couple of dirrent
places. This puts it in a .def file and also adds a few more registers (e.g.
the x87 regs) which should lead to more readable dumps, but I didn't include
the whole list since that seems unnecessary.
X86_MC::initLLVMToSEHAndCVRegMapping is pretty ugly, but at least it's not
relying on magic constants anymore. The TODO of using tablegen still stands.
Differential revision: https://reviews.llvm.org/D38480
llvm-svn: 314821
Add the option to lookup an address in the debug information and print
out the file, function, block and line table details.
Differential revision: https://reviews.llvm.org/D38409
llvm-svn: 314817
This implement the insertion operator for DWARF address ranges so they
are consistently printed as [LowPC, HighPC).
While a dump method might have felt more consistent, it is used
exclusively for printing error messages in the verifier and never used
for actual dumping. Hence this approach is more intuitive and creates
less clutter at the call sites.
Differential revision: https://reviews.llvm.org/D38395
llvm-svn: 314523
This patch introduces 3 helper functions: error(), warn() and note() to
make printing during verification more consistent. When supported, the
respective prefixes are printed in color using the same color scheme as
clang.
Differential revision: https://reviews.llvm.org/D38368
llvm-svn: 314498
This patch implements the dwarfdump option --find=<name>. This option
looks for a DIE in the accelerator tables and dumps it if found. This
initial patch only adds support for .apple_names to keep the review
small, adding the other sections and pubnames support should be
trivial though.
Differential Revision: https://reviews.llvm.org/D38282
llvm-svn: 314439
This patch adds a check to the DWARF verifier to detect CUs without a
unit DIE.
Differential revision: https://reviews.llvm.org/D38363
llvm-svn: 314426
When dsymutil generates the companion file, its strips all unnecessary
sections by omitting their body and setting the offset in their
corresponding load command to zero.
One such section is the .eh_frame section, as it contains runtime
information rather than debug information and is part of the __TEXT
segment. When reading this section, we would just read the number of
bytes specified in the load command, starting from offset 0 (i.e. the
beginning of the file).
Rather than trying to parse this obviously invalid section, dwarfdump
now skips this.
Differential revision: https://reviews.llvm.org/D38135
llvm-svn: 314208
This patch adds dumping of line table instructions as well as the final
state at each specified pc value in verbose mode. This is essentially
the same as the default in Darwin's dwarfdump. Dumping the actual line
table opcodes can be particularly useful for something like debugging a
bad `.debug_line` section.
Differential revision: https://reviews.llvm.org/D37971
llvm-svn: 313910
This is a bit ugly because we can't put Optional into a union. Hide all
of that behind a set of accessors and make accesses safer using asserts.
llvm-svn: 313884
This patch implements the Darwin dwarfdump option --recurse-depth=<N>,
which limits the recursion depth when selectively printing DIEs at an
offset.
Differential Revision: https://reviews.llvm.org/D38064
llvm-svn: 313778
When symbolizing large binaries, parsing every CU in a DWP file is a
significant performance penalty. Instead, use the index to only load the
CUs that are needed.
llvm-svn: 313659
This speeds up dumping specific DIEs by not parsing abbreviations for
units that are not used.
(this is also handy to have in eventually to speed up llvm-symbolizer
for .dwp files, where parsing most of the DWP file can be avoided by
using the index)
llvm-svn: 313635
This patch makes the `.eh_frame` extension an alias for `.debug_frame`.
Up till now it was only possible to dump the section using objdump, but
not with dwarfdump. Since the two are essentially interchangeable, we
dump whichever of the two is present.
As a workaround, this patch also adds parsing for 3 currently
unimplemented CFA instructions: `DW_CFA_def_cfa_expression`,
`DW_CFA_expression`, and `DW_CFA_val_expression`. Because I lack the
required knowledge, I just parse the fields without actually creating
the instructions.
Finally, this also fixes the typo in the `.debug_frame` section name
which incorrectly contained a trailing `s`.
Differential revision: https://reviews.llvm.org/D37852
llvm-svn: 313530
This is the first of many commits that enable selectively dumping just
one record from the debug info.
This reapplies r313412 with some extra qualification to appease GCC and MSVC.
llvm-svn: 313419
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313255
This patch started as an attempt to rebase Greg's differential (D32821).
The result is both quite similar and different at the same time. It adds
the following checks:
- Verify that all address ranges in a DIE are valid.
- Verify that no ranges within the DIE overlap.
- Verify that no ranges overlap with the ranges of a sibling.
- Verify that children are completely contained in its (direct)
parent's address range. (unless both are subprograms)
Differential revision: https://reviews.llvm.org/D37696
llvm-svn: 313250
Since users typically don't really care about the .dwo / non.dwo
distinction, this patch makes it so dwarfdump --debug-<info,...> dumps
.debug_info and (if available) also .debug_info.dwo. This simplifies
the command line interface (I've removed all dwo-specific dump
options) and makes the tool friendlier to use.
Differential Revision: https://reviews.llvm.org/D37771
llvm-svn: 313207
This patches renames "brief" to "verbose" in de DIDumpOptions and
inverts the logic to match the new behavior where brief is the default.
Changing the default value uncovered some bugs related to the
DIDumpOptions not being propagated and have been fixed as well.
Differential revision: https://reviews.llvm.org/D37745
llvm-svn: 313139
As discussed on llvm-dev in
http://lists.llvm.org/pipermail/llvm-dev/2017-September/117301.html
this changes the command line interface of llvm-dwarfdump to match the
one used by the dwarfdump utility shipping on macOS. In addition to
being shorter to type this format also has the advantage of allowing
more than one section to be specified at the same time.
In a nutshell, with this change
$ llvm-dwarfdump --debug-dump=info
$ llvm-dwarfdump --debug-dump=apple-objc
becomes
$ dwarfdump --debug-info --apple-objc
Differential Revision: https://reviews.llvm.org/D37714
llvm-svn: 312970
This patch adds prologue verification, which is already present in
Apple's dwarfdump. It checks for invalid directory indices and warns
about duplicate file paths.
Differential revision: https://reviews.llvm.org/D37511
llvm-svn: 312782
It is possible for two modules to have the same name if they are
archive members with the same name, or if we are doing LTO (in which
case all modules will have the name "lto.tmp").
Differential Revision: https://reviews.llvm.org/D37589
llvm-svn: 312744
It solves issue of wrong section index evaluating for ranges when
base address is used.
Based on David Blaikie's patch D36097.
Differential revision: https://reviews.llvm.org/D37214
llvm-svn: 312477
We have llvm-readobj for dumping CodeView from object files, and
llvm-pdbutil has always been more focused on PDB. However,
llvm-pdbutil has a lot of useful options for summarizing debug
information in aggregate and presenting high level statistical
views. Furthermore, it's arguably better as a testing tool since
we don't have to write tests to conform to a state-machine like
structure where you match multiple lines in succession, each
depending on a previous match. llvm-pdbutil dumps much more
concisely, so it's possible to use single-line matches in many
cases where as with readobj tests you have to use multi-line
matches with an implicit state machine.
Because of this, I'm adding object file support to llvm-pdbutil.
In fact, this mirrors the cvdump tool from Microsoft, which also
supports both object files and pdb files. In the future we could
perhaps rename this tool llvm-cvutil.
In the meantime, this allows us to deep dive into object files
the same way we already can with PDB files.
llvm-svn: 312358
This adds a new command line option, -udt-stats, which breaks
down the stats of S_UDT records. These are one of the biggest
contributors to the size of /DEBUG:FASTLINK PDBs, so they need
some additional tools to be able to analyze their usage. This
option will dig into each S_UDT record and determine what kind
of record it points to, and then break down the statistics by
the target type. The goal here is to identify how our object
files differ from MSVC object files in S_UDT records, so that
we can output fewer of them and reach size parity.
llvm-svn: 312276
Summary:
Based on Fred's patch here: https://reviews.llvm.org/D6771
I can't seem to commandeer the old review, so I'm creating a new one.
With that change the locations exrpessions are pretty printed inline in the
DIE tree. The output looks like this for debug_loc entries:
DW_AT_location [DW_FORM_data4] (0x00000000
0x0000000000000001 - 0x000000000000000b: DW_OP_consts +3
0x000000000000000b - 0x0000000000000012: DW_OP_consts +7
0x0000000000000012 - 0x000000000000001b: DW_OP_reg0 RAX, DW_OP_piece 0x4
0x000000000000001b - 0x0000000000000024: DW_OP_breg5 RDI+0)
And like this for debug_loc.dwo entries:
DW_AT_location [DW_FORM_sec_offset] (0x00000000
Addr idx 2 (w/ length 190): DW_OP_consts +0, DW_OP_stack_value
Addr idx 3 (w/ length 23): DW_OP_reg0 RAX, DW_OP_piece 0x4)
Simple locations without ranges are printed inline:
DW_AT_location [DW_FORM_block1] (DW_OP_reg4 RSI, DW_OP_piece 0x4, DW_OP_bit_piece 0x20 0x0)
The debug_loc(.dwo) dumping in changed accordingly to factor the code.
Reviewers: dblaikie, aprantl, friss
Subscribers: mgorny, javed.absar, hiraditya, llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D37123
llvm-svn: 312042
We were using a std::vector<> and resizing to MaxRecordLength,
which is ~64KB. We would then do this repeatedly often many
times in a tight loop, which was causing measurable performance
impact when linking PDBs.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36940
llvm-svn: 311375
computeAddrMap function calls std::stable_sort with a comparison
function that computes deserialized symbols every time its called.
In the result deserializeAs<PublicSym32> is called 20-30 times per
symbol. It's much faster to calculate it beforehand and pass a
pointer to it to the comparison function.
Patch by Alex Telishev
Differential Revision: https://reviews.llvm.org/D36941
llvm-svn: 311373
This adds support for dumping a summary of module symbols
and CodeView debug chunks. This option prints a table for
each module of all of the symbols that occurred in the module
and the number of times it occurred and total byte size. Then
at the end it prints the totals for the entire file.
Additionally, this patch adds the -jmc (just my code) option,
which suppresses modules which are from external libraries or
linker imports, so that you can focus only on the object files
and libraries that originate from your own source code.
llvm-svn: 311338
This patch hides the .debug_str offset and DIE reference offsets into
the CU when llvm-dwarfdump is invoked with -brief.
Differential Revision: https://reviews.llvm.org/D36835
llvm-svn: 311201
When dumping, we were treating the S_INLINESITESYM as referring
to a type record, when it actually refers to an id record. We
had this correct in TypeIndexDiscovery, so our merging algorithm
should be fine, but we had it wrong in the dumper, which means it
would appear to work most of the time, unless the index was out
of bounds in the type stream, when it would fail. Fixed this, and
audited a few other cases to make them match the behavior in
TypeIndexDiscovery.
Also, I've now observed a new symbol record with kind 0x1168 which
I have no clue what it is, so to avoid crashing we have to just
print "Unknown Symbol Kind".
llvm-svn: 311117
As was requested in D36313 thread,
with this patch section names and uniqueness calculated once,
and not every time when a range is dumped.
Differential revision: https://reviews.llvm.org/D36740
llvm-svn: 310923
Teaches llvm-dwarfdump to print section index and name of range
when it dumps .debug_info.
Differential revision: https://reviews.llvm.org/D36313
llvm-svn: 310915
Previously we were writing an empty globals stream. Windows
tools interpret this as "private symbols are not present in
this PDB", even when they are, so we need to fix this. Regardless,
without it we don't have information about global variables, so
we need to fix it anyway. This patch does that.
With this patch, the "lm" command in WinDbg correctly reports
that we have private symbols available, but the "dv" command
still refuses to display local variables.
Differential Revision: https://reviews.llvm.org/D36535
llvm-svn: 310743
In the refactor to merge the publics and globals stream, a bug
was introduced that wrote the wrong value for one of the fields
of the PublicsStreamHeader. This caused debugging in WinDbg
to break.
We had no way of dumping any of these fields, so in addition to
fixing the bug I've added dumping support for them along with a
test that verifies the correct value is written.
llvm-svn: 310439
The publics stream and globals stream are very similar. They both
contain a list of hash buckets that refer into a single shared stream,
the symbol record stream. Because of the need for each builder to manage
both an independent hash stream as well as a single shared record
stream, making the two builders be independent entities is not the right
design. This patch merges them into a single class, of which only a
single instance is needed to create all 3 streams. PublicsStreamBuilder
and GlobalsStreamBuilder are now merged into the single GSIStreamBuilder
class, which writes all 3 streams at once.
Note that this patch does not contain any functionality change. So we're
still not yet writing any records to the globals stream. All we're doing
is making it so that when we do start writing records to the globals,
this refactor won't have to be part of that patch.
Differential Revision: https://reviews.llvm.org/D36489
llvm-svn: 310438
The compiler outputs PROC32_ID symbols into the object files
for functions, and these symbols have an embedded type index
which, when copied to the PDB, refer to the IPI stream. However,
the symbols themselves are also converted into regular symbols
(e.g. S_GPROC32_ID -> S_GPROC32), and type indices in the regular
symbol records refer to the TPI stream. So this patch applies
two fixes to function records.
1. It converts ID symbols to the proper non-ID record type.
2. After remapping the type index from the object file's index
space to the PDB file/IPI stream's index space, it then
remaps that index to the TPI stream's index space by.
Besides functions, during the remapping process we were also
discarding symbol record types which we did not recognize.
In particular, we were discarding S_BPREL32 records, which is
what MSVC uses to describe local variables on the stack. So
this patch fixes that as well by copying them to the PDB.
Differential Revision: https://reviews.llvm.org/D36426
llvm-svn: 310394
These lead to tests failing spuriously as the values after being rendered to a
string were incorrect.
Reviewers: clayborg
Differential Revision: https://reviews.llvm.org/D36319
llvm-svn: 310262
This extends the native reader to enable llvm-pdbutil to list the enums in a
PDB and it includes a simple test. It does not yet list the values in the
enumerations, which requires an actual implementation of
NativeEnumSymbol::FindChildren.
To exercise this code, use a command like:
llvm-pdbutil pretty -native -enums foo.pdb
Differential Revision: https://reviews.llvm.org/D35738
llvm-svn: 310144
Summary:
PDB section contributions are supposed to use output section indices and
offsets, not input section indices and offsets.
This allows the debugger to look up the index of the module that it
should look up in the modules stream for symbol information. With this
change, windbg can now find line tables, but it still cannot print local
variables.
Fixes PR34048
Reviewers: zturner
Subscribers: hiraditya, ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D36285
llvm-svn: 309987
The PDB reserves certain blocks for the FPM that describe which
blocks in the file are allocated and which are free. We weren't
filling that out at all, and in some cases we were even stomping
it with incorrect data. This patch writes a correct FPM.
Differential Revision: https://reviews.llvm.org/D36235
llvm-svn: 309896
Recently problems have been discovered in the way we write the FPM
(free page map). In order to fix this, we first need to establish
a baseline about what a correct FPM looks like using an MSVC
generated PDB, so that we can then make our own generated PDBs
match. And in order to do this, the dumper needs a mode where it
can dump an FPM so that we can write tests for it.
This patch adds a command to dump the FPM, as well as a test against
a known-good PDB.
llvm-svn: 309894
Followup to r309570, fixing it slightly differently (ranges_base and
addr_base should never be read from a DWO file - so there shouldn't be
any issue with 'overriding' the values - conditionalize the code and
assert that the values aren't being overriden).
llvm-svn: 309879
We don't write any actual symbols to this stream yet, but for
now we just create the stream and hook it up to the appropriate
places and give it a valid header.
Differential Revision: https://reviews.llvm.org/D35290
llvm-svn: 309608
DIEs are lazily deserialized so it's possible that the DWO CU is created
before the DIE is parsed. DWO shares .debug_addr and .debug_ranges with the
object file so overwriting the offset with 0 will make the CU unusable.
No test case because I couldn't get clang to emit a non-zero range base.
llvm-svn: 309570
I was a bit lazy when I first implemented this & skipped the index
lookup - obviously for large files this becomes pretty crucial, so here
we go, do the index lookup. Speeds up large DWP symbolizing by... lots.
(20m -> 20s, actually, maybe more in a release build (that was a release
build without index lookup, compared to a debug/non-release build with
the index usage))
llvm-svn: 309507
If you've archived the DWP file somewhere it's probably useful to be
able to just tell llvm-symbolizer where it is when you're symbolizing
stack traces from the binary.
This only provides a mechanism for specifying a single DWP file, good if
you're symbolizing a program with a single DWP file, but it's likely if
the program is dynamically linked that you might have a DWP for each
dynamic library - in which case this feature won't help (at least as
it's surfaced in llvm-symbolizer for now) - in theory it could be
extended to specify a collection of DWP files that could all be
consulted for split CU hash resolution.
llvm-svn: 309498
With ASan, we would write about 512 bytes of malloc fill value to the
PDB, with some random bits ORed in here and there. Dumping the PDB would
always fail reliably.
llvm-svn: 309331
Summary:
MSVC link.exe records all external symbol names in the publics stream.
It provides similar functionality to an ELF .symtab.
Reviewers: zturner, ruiu
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D35871
llvm-svn: 309303
Jonas Devlieghere