This allows better code size for aarch64 floating point materialization
in a future patch.
Reviewers: evandro
Differential Revision: https://reviews.llvm.org/D58690
llvm-svn: 356389
AMDGPU target run out of Subtarget feature flags hitting the limit of 64.
AssemblerPredicates uses at most uint64_t for their representation.
At the same time CodeGen has exhausted this a long time ago and switched
to a FeatureBitset with the current limit of 192 bits.
This patch completes transition to the bitset for feature bits extending
it to asm matcher and MC code emitter.
Differential Revision: https://reviews.llvm.org/D59002
llvm-svn: 355839
Includes a fix to emit a CheckOpcode for build_vector when immAllZerosV/immAllOnesV is used as a pattern root. This means it can't be used to look through bitcasts when used as a root, but that's probably ok. This extra CheckOpcode will ensure that the first match in the isel table will be a SwitchOpcode which is needed by the caching optimization in the ISel Matcher.
Original commit message:
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355784
This caused the first matcher in the isel table for many targets to Opc_Scope instead of Opc_SwitchOpcode. This leads to a significant increase in isel match failures.
llvm-svn: 355433
Previously we had build_vector PatFrags that called ISD::isBuildVectorAllZeros/Ones. Internally the ISD::isBuildVectorAllZeros/Ones look through bitcasts, but we aren't able to take advantage of that in isel. Instead of we have to canonicalize the types of the all zeros/ones build_vectors and insert bitcasts. Then we have to pattern match those exact bitcasts.
By emitting specific matchers for these 2 nodes, we can make isel look through any bitcasts without needing to explicitly match them. We should also be able to remove the canonicalization to vXi32 from lowering, but I've left that for a follow up.
This removes something like 40,000 bytes from the X86 isel table.
Differential Revision: https://reviews.llvm.org/D58595
llvm-svn: 355224
Summary:
The description of KnownBits::zext() and
KnownBits::zextOrTrunc() has confusingly been telling
that the operation is equivalent to zero extending the
value we're tracking. That has not been true, instead
the user has been forced to explicitly set the extended
bits as known zero afterwards.
This patch adds a second argument to KnownBits::zext()
and KnownBits::zextOrTrunc() to control if the extended
bits should be considered as known zero or as unknown.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: javed.absar, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58650
llvm-svn: 355099
At the moment, we mark every atomic memory access as being also volatile. This is unnecessarily conservative and prohibits many legal transforms (DCE, folding, etc..).
This patch removes MOVolatile from the MachineMemOperands of atomic, but not volatile, instructions. This should be strictly NFC after a series of previous patches which have gone in to ensure backend code is conservative about handling of isAtomic MMOs. Once it's in and baked for a bit, we'll start working through removing unnecessary bailouts one by one. We applied this same strategy to the middle end a few years ago, with good success.
To make sure this patch itself is NFC, it is build on top of a series of other patches which adjust code to (for the moment) be as conservative for an atomic access as for a volatile access and build up a test corpus (mostly in test/CodeGen/X86/atomics-unordered.ll)..
Previously landed
D57593 Fix a bug in the definition of isUnordered on MachineMemOperand
D57596 [CodeGen] Be conservative about atomic accesses as for volatile
D57802 Be conservative about unordered accesses for the moment
rL353959: [Tests] First batch of cornercase tests for unordered atomics.
rL353966: [Tests] RMW folding tests w/unordered atomic operations.
rL353972: [Tests] More unordered atomic lowering tests.
rL353989: [SelectionDAG] Inline a single use helper function, and remove last non-MMO interface
rL354740: [Hexagon, SystemZ] Be super conservative about atomics
rL354800: [Lanai] Be super conservative about atomics
rL354845: [ARM] Be super conservative about atomics
Attention Out of Tree Backend Owners: This patch may break you. If it does, you can use the TLI getMMOFlags hook to restore the MOVolatile to any instruction you need to. (See llvm-dev thread titled "PSA: Changes to how atomics are handled in backends" started Feb 27, 2019.)
Differential Revision: https://reviews.llvm.org/D57601
llvm-svn: 355025
Since there is no "Load-and-Test-High" instruction, the 32 bit load of a
register to be compared with 0 can only be implemented with LT if the virtual
GRX32 register ends up in a low part (GR32 register).
This patch detects these cases and passes the GR32 registers (low parts) as
(soft) hints in getRegAllocationHints().
Review: Ulrich Weigand.
llvm-svn: 354935
This patch aims to make sure that any such constant that can be generated
with a vector instruction (for example VGBM) is recognized as such during
legalization and kept as a target independent node through post-legalize
DAGCombining.
Two new functions named isVectorConstantLegal() and loadVectorConstant()
replace old ways of handling vector/FP constants.
A new struct named SystemZVectorConstantInfo is used to cache the results of
isVectorConstantLegal() and pass them onto loadVectorConstant().
Support for fp128 constants in the presence of FeatureVectorEnhancements1
(z14) has been added.
Review: Ulrich Weigand
https://reviews.llvm.org/D58270
llvm-svn: 354896
As requested during review of D57601, be equally conservative for atomic MMOs as for volatile MMOs in all in tree backends. At the moment, all atomic MMOs are also volatile, but I'm about to change that.
Reviewed as part of https://reviews.llvm.org/D58490, with other backends still pending review.
llvm-svn: 354740
It seems there were some problem with using a .mir test. For some reason
doing '-stop-before=codegenprepare' and then '-start-before=codegenprepare'
on the output .mir file results in the NoVRegs Property after instruction
selection.
Recommitting the same test as an .ll file instead.
llvm-svn: 354160
isFPImmLegal() has been extended to recognize certain FP immediates that can
be built with VGM (Vector Generate Mask).
These scalar FP immediates (that were previously loaded from the constant
pool) are now selected as VGMF/VGMG in Select().
Review: Ulrich Weigand
https://reviews.llvm.org/D58003
llvm-svn: 353867
Since SystemZ supports counting of leading zeros with the FLOGR instruction,
isCheapToSpeculateCtlz() should return true, which it now does.
ISD::CTLZ_ZERO_UNDEF i32 is now handled the same way as ISD::CTLZ is, which
is needed since promotion to i64 is required and CTLZ_ZERO_UNDEF is only
expanded to CTLZ if it is Legal or Custom.
Review: Ulrich Weigand
https://reviews.llvm.org/D57710
llvm-svn: 353330
Don't lower BUILD_VECTORs to BYTE_MASK, but instead expose the BUILD_VECTORs
to the DAGCombiner and select them to VGBM in Select(). This allows the
DAGCombiner to understand the constant vector values.
For floating point, only all-zeros vectors are now generated with VGBM, as it
turned out to be somewhat complicated to handle any arbitrary constants,
while in practice this is very rare and hardly needed.
The SystemZ ISD opcodes z_byte_mask, z_vzero and z_vones have been removed.
Review: Ulrich Weigand
https://reviews.llvm.org/D57152
llvm-svn: 353325
The IPM sequence currently generated to compute the strcmp/memcmp
result will return INT_MIN for the "less than zero" case. While
this is in compliance with the standard, strictly speaking, it
turns out that common applications cannot handle this, e.g. because
they negate a comparison result in order to implement reverse
compares.
This patch changes code to use a different sequence that will result
in -2 for the "less than zero" case (same as GCC). However, this
requires that the two source operands of the compare instructions
are inverted, which breaks the optimization in removeIPMBasedCompare.
Therefore, I've removed this (and all of optimizeCompareInstr), and
replaced it with a mostly equivalent optimization in combineCCMask
at the DAGcombine level.
llvm-svn: 353304
I'm looking at adding a second INLINEASM opcode for better modeling asm-goto
as a terminator. Using the existing predicate will reduce teh number of
places that will need to use the new opcode.
llvm-svn: 353095
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Summary:
Like with X86, this allows better DAG-level alias analysis and
alignment inference for wrapped addresses.
Reviewers: jonpa, uweigand
Reviewed By: uweigand
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D57407
llvm-svn: 352786
After creating new PHI instructions during isel pseudo expansion, the NoPHIs
property of MF should be reset in case it was previously set.
Review: Ulrich Weigand
llvm-svn: 352030
Two backend optimizations failed to handle cases when compiled with -g, due
to failing to consider DBG_VALUE instructions. This was in
SystemZTargetLowering::emitSelect() and
SystemZElimCompare::getRegReferences().
This patch makes sure that DBG_VALUEs are recognized so that they do not
affect these optimizations.
Tests for branch-on-count, load-and-trap and consecutive selects.
Review: Ulrich Weigand
https://reviews.llvm.org/D57048
llvm-svn: 351928
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
There are several vector instructions which may or may not set the
condition code register, depending on the value of an argument.
For codegen, we use two versions of the instruction, one that sets
CC and one that doesn't, which hard-code appropriate values of that
argument. But we also have a "generic" version of the instruction
that is used for the assembler/disassembler. These generic versions
should always be considered to clobber CC just to be safe.
llvm-svn: 349761
This patch fixes two deficiencies in current code that recognizes
the VLLEZ idiom:
- For the floating-point versions, we have ISel patterns that match
on a bitconvert as the top node. In more complex cases, that
bitconvert may already have been merged into something else.
Fix the patterns to match the inner nodes instead.
- For the 64-bit integer versions, depending on the surrounding code,
we may get either a DAG tree based on JOIN_DWORDS or one based on
INSERT_VECTOR_ELT. Use a PatFrags to simply match both variants.
llvm-svn: 349749
Current code in SystemZDAGToDAGISel::tryGather refuses to perform
any transformation if the Load SDNode has more than one use. This
(erronously) counts uses of the chain result, which prevents the
optimization in many cases unnecessarily. Fixed by this patch.
llvm-svn: 349748
We already have special code (DAG combine support for FP_ROUND)
to recognize cases where we an use a vector version of VLEDB to
perform two floating-point truncates in parallel, but equivalent
support for VLEDB (vector floating-point extends) has been
missing so far. This patch adds corresponding DAG combine
support for FP_EXTEND.
llvm-svn: 349746
When computing register allocation hints for a GRX32Bit register, make sure
that any of the hinted registers that are also copy hints are returned first
in the list.
Review: Ulrich Weigand.
llvm-svn: 349037
Adds fatal errors for any target that does not support the Tiny or Kernel
codemodels by rejigging the getEffectiveCodeModel calls.
Differential Revision: https://reviews.llvm.org/D50141
llvm-svn: 348585
A loaded value with multiple users compared with 0 will become a load and
test single instruction. The load is not folded in this case (multiple
users), but the compare instruction is eliminated.
This patch returns 0 cost for the icmp in these cases.
Review: Ulrich Weigand
https://reviews.llvm.org/D55111
llvm-svn: 348141
Three minor changes to these extra costs:
* For ICmp instructions, instead of adding 2 all the time for extending each
operand, this is only done if that operand is neither a load or an
immediate.
* The operands extension costs for divides removed, because we now use a high
cost already for the divide (20).
* The costs for lhsr/ashr extra costs removed as this did not seem useful.
Review: Ulrich Weigand
https://reviews.llvm.org/D55053
llvm-svn: 347961
CGF/CLGF compares an i64 register with a sign/zero extended loaded i32 value
in memory.
This patch makes such a load considered foldable and so gets a 0 cost.
Review: Ulrich Weigand
https://reviews.llvm.org/D54944
llvm-svn: 347735
AH, SH and MH costs are already covered in the cases where LHS is 32 bits and
RHS is 16 bits of memory sign-extended to i32.
As these instructions are also used when LHS is i16, this patch recognizes
that the loads will get folded then as well.
Review: Ulrich Weigand
https://reviews.llvm.org/D54940
llvm-svn: 347734
Single instructions exist for i8 and i16 comparisons of memory against a
small immediate.
This patch makes sure that if the load in these cases has a single user (the
ICmp), it gets a 0 cost (folded), and also that the ICmp gets a cost of 1.
Review: Ulrich Weigand
https://reviews.llvm.org/D54897
llvm-svn: 347733
Since byte-swapping loads and stores are supported, a 'load -> bswap' or
'bswap -> store' sequence should have the cost of one.
Review: Ulrich Weigand
https://reviews.llvm.org/D54870
llvm-svn: 347732
Summary:
Add a hook to the GCMetadataPrinter for emitting stack maps in
custom format. The hook will be called at stack map generation
time. The default stack map format is used if there is no hook.
For this to be useful a few data structures and accessors are
exposed from the StackMaps class, so the custom printer can
access the stack map data.
This patch authored by Cherry Zhang <cherryyz@google.com>.
Reviewers: thanm, apilipenko, reames
Reviewed By: reames
Subscribers: reames, apilipenko, nemanjai, javed.absar, kbarton, jsji, llvm-commits
Differential Revision: https://reviews.llvm.org/D53892
llvm-svn: 347584
Implement getIntrinsicInstrCost() and return costs reflecting that bswap can
be done with a vperm per vector register.
Review: Ulrich Weigand
https://reviews.llvm.org/D54789
llvm-svn: 347445
If a loaded value is replicated it is best to combine these two operations
into a VLREP (load and replicate), but isel will not produce this if the load
has other users as well.
This patch handles this by putting the other users of the load to use the
REPLICATE 0-element instead of the load. This way the load has only the
REPLICATE node as user, and we get a VLREP.
Review: Ulrich Weigand
https://reviews.llvm.org/D54264
llvm-svn: 346746
Improve getCastInstrCost() by respecting the different types of Src and Dst
for vector integer <-> fp conversions.
This means that extracting from integer becomes more expensive (by the
extraction penalty), and the extraction from fp becomes cheaper (no longer
has a false extraction penalty).
Review: Ulrich Weigand
https://reviews.llvm.org/D54423
llvm-svn: 346663
Iterate over all elements and count the number of uses among them for each
used load. Then make sure to REPLICATE the load which has the most uses in
order to minimize the number of needed element insertions.
Review: Ulrich Weigand
https://reviews.llvm.org/D54322
llvm-svn: 346637
A minor improvement of buildVector() that skips creating an
INSERT_VECTOR_ELT for a Value which has already been used for the
REPLICATE.
Review: Ulrich Weigand
https://reviews.llvm.org/D54315
llvm-svn: 346504
It was discovered in randomized testing that the SystemZ implementation of
shouldCoalesce() could be caused to crash when subreg liveness was
enabled. This was because an undef use of the virtual register was copied
outside current MBB at the point of shouldCoalesce() being called. For more
details, see https://bugs.llvm.org/show_bug.cgi?id=39276.
This patch changes the check for MBB locality from livein/liveout checks to
do checks for all instructions of both intervals being inside MBB. This
avoids the cases with dead defs / undef uses outside MBB, which are not
affecting liveness in/out of MBB.
The original test case included as a reduced .mir test case.
Review: Ulrich Weigand
https://reviews.llvm.org/D54197
llvm-svn: 346406
The main caller of this already has an MVT and several targets called getSimpleVT inside without checking isSimple. This makes the simpleness explicit.
llvm-svn: 346180
Let i8/i16 uint/sint to fp conversions cost 1 if operand is a load.
Since the load already does the extension, there is no extra cost (previously
returned 2).
Review: Ulrich Weigand
https://reviews.llvm.org/D54028
llvm-svn: 346009
Model this function more closely after the BasicTTIImpl version, with
separate handling of loads and stores. For loads, the set of actually loaded
vectors is checked.
This makes it more readable and just slightly more accurate generally.
Review: Ulrich Weigand
https://reviews.llvm.org/D53071
llvm-svn: 345998
This patch should not introduce any behavior changes. It consists of
mostly one of two changes:
1. Replacing fall through comments with the LLVM_FALLTHROUGH macro
2. Inserting 'break' before falling through into a case block consisting
of only 'break'.
We were already using this warning with GCC, but its warning behaves
slightly differently. In this patch, the following differences are
relevant:
1. GCC recognizes comments that say "fall through" as annotations, clang
doesn't
2. GCC doesn't warn on "case N: foo(); default: break;", clang does
3. GCC doesn't warn when the case contains a switch, but falls through
the outer case.
I will enable the warning separately in a follow-up patch so that it can
be cleanly reverted if necessary.
Reviewers: alexfh, rsmith, lattner, rtrieu, EricWF, bollu
Differential Revision: https://reviews.llvm.org/D53950
llvm-svn: 345882
Scalar i1 to fp conversions are done with a branch sequence, so it should
have a higher cost.
Review: Ulrich Weigand
https://reviews.llvm.org/D53924
llvm-svn: 345818
This factors out a new method getBoolVecToIntConversionCost() containing the
code for vector sext/zext of i1, in order to reuse it for i1 to double vector
conversions.
Review: Ulrich Weigand
https://reviews.llvm.org/D53923
llvm-svn: 345817
optsize using masked wide loads
Under Opt for Size, the vectorizer does not vectorize interleave-groups that
have gaps at the end of the group (such as a loop that reads only the even
elements: a[2*i]) because that implies that we'll require a scalar epilogue
(which is not allowed under Opt for Size). This patch extends the support for
masked-interleave-groups (introduced by D53011 for conditional accesses) to
also cover the case of gaps in a group of loads; Targets that enable the
masked-interleave-group feature don't have to invalidate interleave-groups of
loads with gaps; they could now use masked wide-loads and shuffles (if that's
what the cost model selects).
Reviewers: Ayal, hsaito, dcaballe, fhahn
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53668
llvm-svn: 345705
The LRV and STRV nodes carry an extra operand to indicate the
type of the memory access. This is redundant, since the nodes
are actually of class MemIntrinsicNode and therefore hold that
same information already as MemoryVT.
NFC intended.
llvm-svn: 345618
Sub, SDiv and UDiv are not commutative, so only the RHS operand can fold a
load. This patch adds a check for this.
Review: Ulrich Weigand
https://reviews.llvm.org/D53791
llvm-svn: 345596
SystemZAsmParser can now handle -debug by printing the operands neatly to the
output stream. Before this patch this lead to an llvm_unreachable().
It seems that now '-mllvm -debug' does not cause any crashes anywhere (at
least not on SPEC).
Review: Ulrich Weigand
https://reviews.llvm.org/D53328
llvm-svn: 345349
In order to print the IR slot number for the memory operand, the DAG pointer
must be passed to SDNode::dump().
The isel-debug.ll test updated to also check for the IR Value reference being
printed correctly.
Review: Ulrich Weigand
https://reviews.llvm.org/D53333
llvm-svn: 345347
The SystemZ backend can do arithmetic of memory by loading and then extending
one of the operands. Similarly, a load + truncate can be folded into an
operand.
This patch improves the SystemZ TTI cost function to recognize this.
Review: Ulrich Weigand
https://reviews.llvm.org/D52692
llvm-svn: 345327
Enable the DAG optimization that converts vector div/rem with constants into
multiply+shifts sequences by expanding them early. This is needed since
ISD::SMUL_LOHI is 'Custom' lowered on SystemZ, and will therefore not be
available to BuildSDIV after legalization.
Better cost values for these instructions based on how they will be
implemented (a constant divisor is cheaper).
Review: Ulrich Weigand
https://reviews.llvm.org/D53196
llvm-svn: 345321
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
interleave-group
The vectorizer currently does not attempt to create interleave-groups that
contain predicated loads/stores; predicated strided accesses can currently be
vectorized only using masked gather/scatter or scalarization. This patch makes
predicated loads/stores candidates for forming interleave-groups during the
Loop-Vectorizer's analysis, and adds the proper support for masked-interleave-
groups to the Loop-Vectorizer's planning and transformation stages. The patch
also extends the TTI API to allow querying the cost of masked interleave groups
(which each target can control); Targets that support masked vector loads/
stores may choose to enable this feature and allow vectorizing predicated
strided loads/stores using masked wide loads/stores and shuffles.
Reviewers: Ayal, hsaito, dcaballe, fhahn, javed.absar
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D53011
llvm-svn: 344472
Until mischeduler is clever enough to avoid spilling in a vectorized loop
with many (scalar) DLRs it is better to avoid high vectorization factors (8
and above).
llvm-svn: 344129
A new function getNumVectorRegs() is better to use for the number of needed
vector registers instead of getNumberOfParts(). This is to make sure that the
number of vector registers (and typically operations) required for a vector
type is accurate.
getNumberOfParts() which was previously used works by splitting the vector
type until it is legal gives incorrect results for types with a non
power of two number of elements (rare).
A new static function getScalarSizeInBits() that also checks for a pointer
type and returns 64U for it since otherwise it gets a value of 0). Used in a
few places where Ty may be pointer.
Review: Ulrich Weigand
llvm-svn: 344115
Finally all targets are enabling multiple regalloc hints, so the hook to
disable this can now be removed.
NFC.
Review: Simon Pilgrim
https://reviews.llvm.org/D52316
llvm-svn: 343851
After recent improvements which makes better use of LOC instead of IPM, the
TTI cost functions also needs to be updated to reflect this.
This involves sext, zext and xor of i1.
The tests were updated so that for z13 the new costs are expected, while the
old costs are still checked for on zEC12.
Review: Ulrich Weigand
https://reviews.llvm.org/D51339
llvm-svn: 342207
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
Change
subreg_r32 -> subreg_h32
subreg_r64 -> subreg_h64
subreg_hr32 -> subreg_hh32
The subregisters subreg_r32 and subreg_r64 were added to emphasize the
fact that modifying these subregisters may clobber the entire register.
This is not necessarily the case for subreg_h32, et al.
However, the ability to compose subreg_h64 with subreg_r32, and with
subreg_h32 and subreg_l32 at the same time makes the compositions be
treated as non-overlapping (leading to problems when tracking subreg
liveness). See D50468 for more details.
Differential Revision: https://reviews.llvm.org/D50725
llvm-svn: 339778
This option is needed to enable subreg liveness tracking during register
allocation.
Review: Ulrich Weigand
https://reviews.llvm.org/D50779
llvm-svn: 339776
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
Remove the redundant check against zero when updating ProcResourceCounters in
nextGroup(), as pointed out in https://reviews.llvm.org/D50187.
Review: Ulrich Weigand.
llvm-svn: 339139
Some instructions expand to more than one decoder group.
This has been hitherto ignored, but is handled with this patch.
Review: Ulrich Weigand
https://reviews.llvm.org/D50187
llvm-svn: 338849
The DAG combiner logic to simplify AND masks in shift counts is invalid.
While it is true that the SystemZ shift instructions ignore all but the
low 6 bits of the shift count, it is still invalid to simplify the AND
masks while the DAG still uses the standard shift operators (which are
*not* defined to match the SystemZ instruction behavior).
Instead, this patch performs equivalent operations during instruction
selection. For completely removing the AND, this now happens via
additional DAG match patterns implemented by a multi-alternative
PatFrags. For simplifying a 32-bit AND to a 16-bit AND, the existing DAG
patterns were already mostly OK, they just needed an output XForm to
actually truncate the immediate value.
Unfortunately, the latter change also exposed a bug in TableGen: it
seems XForms are currently only handled correctly for direct operands of
the outermost operation node. This patch also fixes that bug by simply
recurring through the whole pattern. This should be NFC for all other
targets.
Differential Revision: https://reviews.llvm.org/D50096
llvm-svn: 338521
Since z13, the max group size will be 2 if any μop has more than 3 register
sources.
This has been ignored sofar in the SystemZHazardRecognizer, but is now
handled by recognizing those instructions and adjusting the tracking of
decoding and the cost heuristic for grouping.
Review: Ulrich Weigand
https://reviews.llvm.org/D49847
llvm-svn: 338368
NFC changes to make scheduler TableGen files more readable, by using loops
instead of a lot of similar defs with just e.g. a latency value that changes.
https://reviews.llvm.org/D49598
Review: Ulrich Weigand, Javed Abshar
llvm-svn: 337909
Two minor issues: The new MCD SchedWrite name does not contain "Unit" like
all the others, so a check is needed. Also, print "LSU" instead of "LS".
Review: Ulrich Weigand
llvm-svn: 337700
As a consequence of recent discussions
(http://lists.llvm.org/pipermail/llvm-dev/2018-May/123164.html), this patch
changes the SystemZ SchedModels so that the IssueWidth is 6, which is the
decoder capacity, and NumMicroOps become the number of decoder slots needed
per instruction.
In addition, the SchedWrite latencies now match the MachineInstructions
def-operand indexes, and ReadAdvances have been added on instructions with
one register operand and one memory operand.
Review: Ulrich Weigand
https://reviews.llvm.org/D47008
llvm-svn: 337538
If we are only extracting vector elements via EXTRACT_VECTOR_ELT(s) we may be able to use SimplifyDemandedVectorElts to avoid unnecessary vector ops.
Differential Revision: https://reviews.llvm.org/D49262
llvm-svn: 337258
A TableGen instruction record usually contains a DAG pattern that will
describe the SelectionDAG operation that can be implemented by this
instruction. However, there will be cases where several different DAG
patterns can all be implemented by the same instruction. The way to
represent this today is to write additional patterns in the Pattern
(or usually Pat) class that map those extra DAG patterns to the
instruction. This usually also works fine.
However, I've noticed cases where the current setup seems to require
quite a bit of extra (and duplicated) text in the target .td files.
For example, in the SystemZ back-end, there are quite a number of
instructions that can implement an "add-with-overflow" operation.
The same instructions also need to be used to implement just plain
addition (simply ignoring the extra overflow output). The current
solution requires creating extra Pat pattern for every instruction,
duplicating the information about which particular add operands
map best to which particular instruction.
This patch enhances TableGen to support a new PatFrags class, which
can be used to encapsulate multiple alternative patterns that may
all match to the same instruction. It operates the same way as the
existing PatFrag class, except that it accepts a list of DAG patterns
to match instead of just a single one. As an example, we can now define
a PatFrags to match either an "add-with-overflow" or a regular add
operation:
def z_sadd : PatFrags<(ops node:$src1, node:$src2),
[(z_saddo node:$src1, node:$src2),
(add node:$src1, node:$src2)]>;
and then use this in the add instruction pattern:
defm AR : BinaryRRAndK<"ar", 0x1A, 0xB9F8, z_sadd, GR32, GR32>;
These SystemZ target changes are implemented here as well.
Note that PatFrag is now defined as a subclass of PatFrags, which
means that some users of internals of PatFrag need to be updated.
(E.g. instead of using PatFrag.Fragment you now need to use
!head(PatFrag.Fragments).)
The implementation is based on the following main ideas:
- InlinePatternFragments may now replace each original pattern
with several result patterns, not just one.
- parseInstructionPattern delays calling InlinePatternFragments
and InferAllTypes. Instead, it extracts a single DAG match
pattern from the main instruction pattern.
- Processing of the DAG match pattern part of the main instruction
pattern now shares most code with processing match patterns from
the Pattern class.
- Direct use of main instruction patterns in InferFromPattern and
EmitResultInstructionAsOperand is removed; everything now operates
solely on DAG match patterns.
Reviewed by: hfinkel
Differential Revision: https://reviews.llvm.org/D48545
llvm-svn: 336999
This is needed to get CC operand in right place, as expected by the
SchedModel.
Review: Ulrich Weigand
https://reviews.llvm.org/D47820
llvm-svn: 334161
On targets like Arm some relaxations may only be performed when certain
architectural features are available. As functions can be compiled with
differing levels of architectural support we must make a judgement on
whether we can relax based on the MCSubtargetInfo for the function. This
change passes through the MCSubtargetInfo for the function to
fixupNeedsRelaxation so that the decision on whether to relax can be made
per function. In this patch, only the ARM backend makes use of this
information. We must also pass the MCSubtargetInfo to applyFixup because
some fixups skip error checking on the assumption that relaxation has
occurred, to prevent code-generation errors applyFixup must see the same
MCSubtargetInfo as fixupNeedsRelaxation.
Differential Revision: https://reviews.llvm.org/D44928
llvm-svn: 334078
With this we gain a little flexibility in how the generic object
writer is created.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47045
llvm-svn: 332868
To make this work I needed to add an endianness field to MCAsmBackend
so that writeNopData() implementations know which endianness to use.
Part of PR37466.
Differential Revision: https://reviews.llvm.org/D47035
llvm-svn: 332857
Sorry, the commit comment for r332703 is completely broken.
My mind slipped - the right description would be:
In SystemZDAGToDAGISel::Select(), in the handling for SELECT_CCMASK:
Check if UpdateNodeOperands() returns a different SDNode and in that
case call ReplaceNode.
Review: Ulrich Weigand.
llvm-svn: 332706
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Inspired by r331508, I did a grep and found these.
Mostly just change from dyn_cast to cast. Some cases also showed a dyn_cast result being converted to bool, so those I changed to isa.
llvm-svn: 331577
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Adhemerval Zanella