immediate displacement. Specifically, add support for generating the proper IR.
We've been able to parse this for some time now. Test case to be added on the
clang side.
Part of rdar://13453209
llvm-svn: 179393
can build up the identifier string. No test case as support for looking up
these type of identifiers hasn't been implemented on the clang side.
Part of rdar://13499009
llvm-svn: 179336
wasn't always the start of the operand. If there was a symbol reference, then
Start pointed to that token. It's very likely there are other places that need
to be updated.
llvm-svn: 179210
Test cases that regressed due to r179115, plus a few more, were added in
r179182. Original commit message below:
[ms-inline asm] Use parsePrimaryExpr in lieu of parseExpression if we need to
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
Part of rdar://13611297
llvm-svn: 179187
parse an identifier. Otherwise, parseExpression may parse multiple tokens,
which makes it impossible to properly compute an immediate displacement.
An example of such a case is the source operand (i.e., [Symbol + ImmDisp]) in
the below example:
__asm mov eax, [Symbol + ImmDisp]
The existing test cases exercise this patch.
rdar://13611297
llvm-svn: 179115
rather than deriving the StringRef from the Start and End SMLocs.
Using the Start and End SMLocs works fine for operands such as [Symbol], but
not for operands such as [Symbol + ImmDisp]. All existing test cases that
reference a variable exercise this patch.
rdar://13602265
llvm-svn: 179109
memory operands.
Essentially, this layers an infix calculator on top of the parsing state
machine. The scale on the index register is still expected to be an immediate
__asm mov eax, [eax + ebx*4]
and will not work with more complex expressions. For example,
__asm mov eax, [eax + ebx*(2*2)]
The plus and minus binary operators assume the numeric value of a register is
zero so as to not change the displacement. Register operands should never
be an operand for a multiply or divide operation; the scale*indexreg
expression is always replaced with a zero on the operand stack to prevent
such a case.
rdar://13521380
llvm-svn: 178881
qualifiers.
This patch only adds support for parsing these identifiers in the
X86AsmParser. The front-end interface isn't capable of looking up
these identifiers at this point in time. The end result is the
compiler now errors during object file emission, rather than at
parse time. Test case coming shortly.
Part of rdar://13499009 and PR13340
llvm-svn: 178566
an X86Operand, but also performs a Sema lookup and adds the sizing directive
when appropriate. Use this when parsing a bracketed statement. This is
necessary to get the instruction matching correct as well. Test case coming
on clang side.
rdar://13455408
llvm-svn: 177439
This is necessary not only for representing empty ranges, but for handling
multibyte characters in the input. (If the end pointer in a range refers to
a multibyte character, should it point to the beginning or the end of the
character in a char array?) Some of the code in the asm parsers was already
assuming this anyway.
llvm-svn: 171765
Sooooo many of these had incorrect or strange main module includes.
I have manually inspected all of these, and fixed the main module
include to be the nearest plausible thing I could find. If you own or
care about any of these source files, I encourage you to take some time
and check that these edits were sensible. I can't have broken anything
(I strictly added headers, and reordered them, never removed), but they
may not be the headers you'd really like to identify as containing the
API being implemented.
Many forward declarations and missing includes were added to a header
files to allow them to parse cleanly when included first. The main
module rule does in fact have its merits. =]
llvm-svn: 169131
When an instruction as written requires 32-bit mode and we're assembling
in 64-bit mode, or vice-versa, issue a more specific diagnostic about
what's wrong.
rdar://12700702
llvm-svn: 167937
[register].field
The operator returns the value at the location pointed to by register plus the
offset of field within its structure or union. This patch only handles
immediate fields (i.e., [eax].4). The original displacement has to be a
MCConstantExpr as well.
Part of rdar://12470415 and rdar://12470514
llvm-svn: 166632
see the offsetof operator. Previously, we were matching something like MOVrm
in the front-end and later matching MOVrr in the back-end. This change makes
things more consistent. It also fixes cases where we can't match against a
memory operand as the source (test cases coming).
Part of rdar://12470317
llvm-svn: 166592
non-zero value as we don't know the actual value at this point. This is
necessary to get the matching correct in some cases. However, the actual value
set as the base register doesn't matter, since we're just matching not emitting.
llvm-svn: 166523
a memory operand. Retain this information and then add the sizing directives
to the IR. This allows the backend to do proper instruction selection.
llvm-svn: 166316
the interface between the front-end and the MC layer when parsing inline
assembly. Unfortunately, this is too deep into the parsing stack. Specifically,
we're unable to handle target-independent assembly (i.e., assembly directives,
labels, etc.). Note the MatchAndEmitInstruction() isn't the correct
abstraction either. I'll be exposing target-independent hooks shortly, so this
is really just a cleanup.
llvm-svn: 165858
of operand is specific to MS-style inline assembly and should not be generated
when parsing normal assembly.
The purpose of the wildcard operands are to allow the AsmParser to match
multiple instructions (i.e., MCInsts) to a given ms-style asm statement. For
the time being the matcher just returns the first match. This patch only
implements wildcard matches for memory operands. Support for register
wildcards will be added in the near future.
llvm-svn: 165057
map constraints and MCInst operands to inline asm operands. This replaces the
getMCInstOperandNum() function.
The logic to determine the constraints are not in place, so we still default to
a register constraint (i.e., "r"). Also, we no longer build the MCInst but
rather return just the opcode to get the MCInstrDesc.
llvm-svn: 164979
gas accepts this and it seems to be common enough to be worth supporting. This
doesn't affect the parsing of reg operands outside of .cfi directives.
llvm-svn: 163390
MatchInstructionImpl() function.
These values are used by the ConvertToMCInst() function to index into the
ConversionTable. The values are also needed to call the GetMCInstOperandNum()
function.
llvm-svn: 163101
Assertion failed: (Start.isValid() == End.isValid() && "Start and end should
either both be valid or both be invalid!")
when parsing inline asm. SMLoc assumes that the first char * in the source is
invalid. However, when parsing an inline asm the mnemonic is at this location.
I don't want to change SMLoc, so use a trivial workaround.
llvm-svn: 162381
this is the index of the operand that failed to match.
Note: This may cause a buildbot failure due to an API mismatch in clang. Should
recover with my next commit to clang.
llvm-svn: 162295
This new API will be used by clang to parse ms-style inline asms.
One goal of this project is to use this style of inline asm for targets other
then x86. Therefore, this API needs to be implemented for non-x86 targets at
some point in the future.
llvm-svn: 161624
rdar://10873652
As part of this I updated the llvm-mc disassembler C API to always call the
SymbolLookUp call back even if there is no getOpInfo call back. If there is a
getOpInfo call back that is tried first and then if that gets no information
then the SymbolLookUp is called. I also made the code more robust by
memset(3)'ing to zero the LLVMOpInfo1 struct before then setting
SymbolicOp.Value before for the call to getOpInfo. And also don't use any
values from the LLVMOpInfo1 struct if getOpInfo returns 0. And also don't
use any of the ReferenceType or ReferenceName values from SymbolLookUp if it
returns NULL. rdar://10873563 and rdar://10873683
For the X86 target also fixed bugs so the annotations get printed.
Also fixed a few places in the ARM target that was not producing symbolic
operands for some instructions. rdar://10878166
llvm-svn: 151267
In att style asm syntax memory operand size is derived from suffix attached with mnemonic. In intel style asm syntax it is part of memory operand hence predicate method check is required to select appropriate instruction.
llvm-svn: 148006
the X86 asmparser to produce ranges in the one case that was annoying me, for example:
test.s:10:15: error: invalid operand for instruction
movl 0(%rax), 0(%edx)
^~~~~~~
It should be straight-forward to enhance filecheck, tblgen, and/or the .ll parser to use
ranges where appropriate if someone is interested.
llvm-svn: 142106
Allow a target assembly parser to do context sensitive constraint checking
on a potential instruction match. This will be used, for example, to handle
Thumb2 IT block parsing.
llvm-svn: 137675
This can happen in cases where TableGen generated asm matcher cannot check
whether a register operand is in the right register class. e.g. mem operands.
rdar://8204588
llvm-svn: 136292
llvm-mc gives an "invalid operand" error for instructions that take an unsigned
immediate which have the high bit set such as:
pblendw $0xc5, %xmm2, %xmm1
llvm-mc treats all x86 immediates as signed values and range checks them.
A small number of x86 instructions use the imm8 field as a set of bits.
This change only changes those instructions and where the high bit is not
ignored. The others remain unchanged.
llvm-svn: 136287
Update the debug output interface for MCParsedAsmOperand to have a print()
method which takes an output stream argument, an << operator which invokes
the print method using the given stream, and a dump() method which prints
the operand to the dbgs() stream. This makes the interface more consistent
with the rest of LLVM, and more convenient to use at the debugger command
line.
llvm-svn: 135043
and MCSubtargetInfo.
- Added methods to update subtarget features (used when targets automatically
detect subtarget features or switch modes).
- Teach X86Subtarget to update MCSubtargetInfo features bits since the
MCSubtargetInfo layer can be shared with other modules.
- These fixes .code 16 / .code 32 support since mode switch is updated in
MCSubtargetInfo so MC code emitter can do the right thing.
llvm-svn: 134884
CPU, and feature string. Parsing some asm directives can change
subtarget state (e.g. .code 16) and it must be reflected in other
modules (e.g. MCCodeEmitter). That is, the MCSubtargetInfo instance
must be shared.
llvm-svn: 134795
- Each target asm parser now creates its own MCSubtatgetInfo (if needed).
- Changed AssemblerPredicate to take subtarget features which tablegen uses
to generate asm matcher subtarget feature queries. e.g.
"ModeThumb,FeatureThumb2" is translated to
"(Bits & ModeThumb) != 0 && (Bits & FeatureThumb2) != 0".
llvm-svn: 134678
instructions. I choose to handle this with an asmparser hack,
though it could be handled by changing all the instruction definitions
to allow be "setneb" instead of "setne". The asm parser hack is
better in this case, because we want the disassembler to produce
setne, not setneb.
llvm-svn: 120260
sahf movl 344(%rdi),%r14d
we used to produce:
t.s:2:1: error: unexpected token in argument list
^
we now produce:
t.s:1:11: error: unexpected token in argument list
sahf movl 344(%rdi),%r14d
^
rdar://8581401
llvm-svn: 119676
shift-by-1 instructions, where the asmstring doesn't contain
the implicit 1. It turns out that a bunch of these rotate
instructions were completely broken because they used 1
instead of $1.
This fixes assembly mismatches on "rclb $1, %bl" and friends,
where we used to generate the 3 byte form, we now generate the
proper 2-byte form.
llvm-svn: 118355
floating point stack instructions instead of looking for b/w/l/q.
This fixes issues where we'd accidentally match fistp to fistpl,
when it is in fact an ambiguous instruction.
This changes the behavior of llvm-mc to reject fstp, which was the
correct fix for rdar://8456389:
t.s:1:1: error: ambiguous instructions require an explicit suffix (could be 'fstps', 'fstpl', or 'fstpt')
fstp (%rax)
it also causes us to correctly reject fistp and fist, which addresses
PR8528:
t.s:2:1: error: ambiguous instructions require an explicit suffix (could be 'fistps', or 'fistpl')
fistp (%rax)
^
t.s:3:1: error: ambiguous instructions require an explicit suffix (could be 'fists', or 'fistl')
fist (%rax)
^
Thanks to Ismail Donmez for tracking down the issue here!
llvm-svn: 118346
aliases installed and working. They now work when the
matched pattern and the result instruction have exactly
the same operand list.
This is now enough for us to define proper aliases for
movzx and movsx, implementing rdar://8017633 and PR7459.
Note that we do not accept instructions like:
movzx 0(%rsp), %rsi
GAS accepts this instruction, but it doesn't make any
sense because we don't know the size of the memory
operand. It could be 8/16/32 bits.
llvm-svn: 117901
directives, allowing things like this:
def : MnemonicAlias<"pop", "popl">, Requires<[In32BitMode]>;
def : MnemonicAlias<"pop", "popq">, Requires<[In64BitMode]>;
Move the rest of the X86 MnemonicAliases over to the .td file.
llvm-svn: 117830
sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler
allows for these instructions. Done differently than in r117031 that
caused a valgrind error which was later reverted.
llvm-svn: 117433
sense, when the instruction takes the 16-bit ax register or m16 memory
location. These changes to llvm-mc matches what the darwin assembler allows
for these instructions. Also added the missing flex (without the wait prefix)
and ud2a as an alias to ud2 (still to add ud2b).
llvm-svn: 117031
word forms and suffixed versions to match the darwin assembler in 32-bit and
64-bit modes. This is again for use just with assembly source for llvm-mc .
llvm-svn: 116773
be more complete. These are only expected to be used by llvm-mc with assembly
source so there is no pattern, [], in the .td files. Most are being added to
X86InstrInfo.td as Chris suggested and only comments about register uses are
added. Suggestions welcome on the .td changes as I'm not sure on every detail
of the x86 records. More missing instructions will be coming.
llvm-svn: 116716
My previous fix for rdar://8456371 should only apply to fmulp/faddp,
not to fmul/fadd. Instruction set orthogonality is overrated or
something.
llvm-svn: 114818
x86-32: 32-bit calls were named "call" not "calll". 64-bit calls were correctly
named "callq", so this only impacted x86-32.
This fixes rdar://8456370 - llvm-mc rejects 'calll'
This also exposes that mingw/64 is generating a 32-bit call instead of a 64-bit call,
I will file a bugzilla.
llvm-svn: 114534
the end of the line on a parser error, allowing skipping to happen
for syntactic errors but not for semantic errors. Before we would
miss emitting a diagnostic about the second line, because we skipped
it due to the semantic error on the first line:
foo %eax
bar %al
This fixes rdar://8414033 - llvm-mc ignores lines after an invalid instruction mnemonic errors
llvm-svn: 113688
always be disambiguated as sldtw. sldtw and sldtq with
a mem operands have the same effect, but sldtw is more
compact. Force it to sldtw, resolving rdar://8017530
llvm-svn: 113186
of a mneumonic, report operand errors with better location
info. For example, we now report:
t.s:6:14: error: invalid operand for instruction
cwtl $1
^
but we fail for common cases like:
t.s:11:4: error: invalid operand for instruction
addl $1, $1
^
because we don't know if this is supposed to be the reg/imm or imm/reg
form.
llvm-svn: 113178
failed because a subtarget feature was not enabled. Use this to
remove a bunch of hacks from the X86AsmParser for rejecting things
like popfl in 64-bit mode. Previously these hacks weren't needed,
but were important to get a message better than "invalid instruction"
when used in the wrong mode.
This also fixes bugs where pushal would not be rejected correctly in
32-bit mode (just pusha).
llvm-svn: 113166
- Currently includes a hack to limit ourselves to "In32BitMode" and "In64BitMode", because we don't have the other infrastructure to properly deal with setting SSE, etc. features on X86.
llvm-svn: 108677
- Unfortunate, but necessary for now to handle subtarget instruction matching. Eventually we should factor out the lower level target machine information so we don't need to do this.
llvm-svn: 108664
instruction. Added the 64-bit version "jrcxz" so it is recognized and also
added the checks for incorrect uses of "jcxz" in 64-bit mode and "jrcxz" in
32-bit mode. Still to do is to correctly handle the encoding of the
instruction adding the Address-size override prefix byte, 0x67, when the width
of the count register is not the same as the mode the machine is running in.
Which for example means the encoding of "jecxz" depends if you are assembling
as a 32-bit target or a 64-bit target.
llvm-svn: 105661
are st(0). These can be encoded using an opcode for storing in st(0) or using
an opcode for storing in st(i), where i can also be 0. To allow testing with
the darwin assembler and get a matching binary the opcode for storing in st(0)
is now used. To do this the same logical trick is use from the darwin assembler
in converting things like this:
fmul %st(0), %st
into this:
fmul %st(0)
by looking for the second operand being X86::ST0 for specific floating point
mnemonics then removing the second X86::ST0 operand. This also has the add
benefit to allow things like:
fmul %st(1), %st
that llvm-mc did not assemble.
llvm-svn: 104634
instructions which have no direct register usage.
Darwin 'as' accepts:
add $0, (%rax)
but rejects
mov $0, (%rax)
for example.
Given that, only accept suffix matches which match exactly one form. We still
need to emit nice diagnostics for failures...
llvm-svn: 103015
- The idea is that when a match fails, we just try to match each of +'b', +'w',
+'l'. If exactly one matches, we assume this is a mnemonic prefix and accept
it. If all match, we assume it is width generic, and take the 'l' form.
- This would be a horrible hack, if it weren't so simple. Therefore it is an
elegant solution! Chris gets the credit for this particular elegant
solution. :)
- Next step to making this more robust is to have the X86 matcher generate the
mnemonic prefix information. Ideally we would also compute up-front exactly
which mnemonic to attempt to match, but this may require more custom code in
the matcher than is really worth it.
llvm-svn: 103012
temporary workaround for matching inc/dec on x86_64 to the correct instruction.
- This hack will eventually be replaced with a robust mechanism for handling
matching instructions based on the available target features.
llvm-svn: 98858
Lock prefix, Repeat string operation prefixes and the Segment override prefixes.
Also added versions of the move string and store string instructions without the
repeat prefixes to X86InstrInfo.td. And finally marked the rep versions of
move/store string records in X86InstrInfo.td as isCodeGenOnly = 1 so tblgen is
happy building the disassembler files.
llvm-svn: 95252
something totally broken and parsing them as immediates, but the .td file also
had the wrong match class so things sortof worked. Except, that is, that we
would parse
movl $0, %eax
as
movl 0, %eax
Feel free to guess how well that worked.
llvm-svn: 94869
be static. Also made it possible for clients to get it
and no other functions from ...GenAsmMatcher.inc by
defining REGISTERS_ONLY before including GenAsmMatcher.inc.
This sets the stage for target-specific lexers that can
identify registers and return AsmToken::Register as
appropriate.
llvm-svn: 94266
the new ParseInstruction method just parses and returns a list of
target operands. A new MatchInstruction interface is used to
turn the operand list into an MCInst.
This requires new/deleting all the operands, but it also gives
targets the ability to use polymorphic operands if they want to.
llvm-svn: 93469
that things like .word can be parsed as target specific. Moved parsing .word
out of AsmParser.cpp into X86AsmParser.cpp as it is 2 bytes on X86 and 4 bytes
for other targets that support the .word directive.
llvm-svn: 81461
from MCAsmLexer.h in preparation of supporting other targets. Changed the
X86AsmParser code to reflect this by removing AsmLexer::LexPercent and looking
for AsmToken::Percent when parsing in places that used AsmToken::Register.
Then changed X86ATTAsmParser::ParseRegister to parse out registers as an
AsmToken::Percent followed by an AsmToken::Identifier.
llvm-svn: 80929
specific printer (this only works on x86, for now).
- This makes it possible to do some correctness checking of the parsing and
matching, since we can compare the results of 'as' on the original input, to
those of 'as' on the output from llvm-mc.
- In theory, we could now have an easy ATT -> Intel syntax converter. :)
llvm-svn: 78986
- This doesn't actually improve the algorithm (its still linear), but the
generated (match) code is now fairly compact and table driven. Still need a
generic string matcher.
- The table still needs to be compressed, this is quite simple to do and should
shrink it to under 16k.
- This also simplifies and restructures the code to make the match classes more
explicit, in anticipation of resolving ambiguities.
llvm-svn: 78461
- Still not very sane, but a least its not 60k lines on X86. :)
- In terms of correctness, currently some things are hard wired for X86, and we
still don't properly resolve ambiguities (this is ignoring the instructions
we don't even match due to funny .td stuff or other corner cases).
The high level changes:
1. Represent tokens which are significant for matching explicitly as separate
operands. This uniformly handles not only the instruction mnemonic, but
also 'signficiant' syntax like the '*' in "call * ...".
2. Separate the matching of operands to an instruction from the construction of
the MCInst. In theory this can be done during matching, but since the number
of variations is small I think it makes sense to decompose the problems.
3. Improved a few of the mechanisms to at least successfully flatten / tokenize
the assembly strings for PowerPC and ARM.
4. The comment at the top of AsmMatcherEmitter.cpp explains the approach I'm
moving towards for handling ambiguous instructions. The high-bit is to infer
a partial ordering of the operand classes (and force the user to specify one
if we can't) and use that to resolve ambiguities.
llvm-svn: 78378
- Operands which are just a label should be parsed as immediates, not memory
operands (from the assembler perspective).
- Match a few more flavors of immediates.
- Distinguish match functions for memory operands which don't take a segment
register.
- We match the .s for "hello world" now!
llvm-svn: 77745
- This is "experimental" code, I am feeling my way around and working out the
best way to do things (and learning tblgen in the process). Comments welcome,
but keep in mind this stuff will change radically.
- This is enough to match "subb" and friends, but not much else. The next step is to
automatically generate the matchers for individual operands.
llvm-svn: 77657
Chad Rosier