SUBREG_TO_REG is supposed to be used to assert that we know the upper bits are
zero. But that isn't the case here. We've done no analysis of the inputs.
llvm-svn: 357673
This custom inserter existed so we could do a weird thing where we pretended that the instructions support
a full address mode instead of taking a pointer in EAX/RAX. I think was largely so we could be pointer
size agnostic in the isel pattern.
To make this work we would then put the address into an LEA into EAX/RAX in front of the instruction after
isel. But the LEA is overkill when we just have a base pointer. So we end up using the LEA as a slower MOV
instruction.
With this change we now just do custom selection during isel instead and just assign the incoming address
of the intrinsic into EAX/RAX based on its size. After the intrinsic is selected, we can let isel take
care of selecting an LEA or other operation to do any address computation needed in this basic block.
I've also split the instruction into a 32-bit mode version and a 64-bit mode version so the implicit
use is properly sized based on the pointer. Without this we get comments in the assembly output about
killing eax and defing rax or vice versa depending on whether we define the instruction to use EAX/RAX.
llvm-svn: 357652
Negate updates flags like a subtract. We should be able to use the flags from the RMW form of negate when we have (store (X86ISD::SUB 0, load A), A)
Differential Revision: https://reviews.llvm.org/D60007
llvm-svn: 357353
For 64-bit operations we should consider if the immediate can be made to fit
in an unsigned 32-bits immedate. For OR/XOR this allows us to load the immediate
with MOV32ri instead of movabsq. For AND this allows us to fold the immediate.
Differential Revision: https://reviews.llvm.org/D59867
llvm-svn: 357196
This makes more sense as a place to initialize these. I don't think runOnMachineFunction was overriden when these cached values were originally created.
llvm-svn: 357123
Previously we manually selected the AND/OR/XOR with immediate and the SHL(or ADD if the shift is 1). But this was missing out on the opportunity to use a 64 bit AND with a 32-bit immediate and possibly other isel tricks we have built into the tables.
Instead, insert the new nodes into the DAG using insertDAGNode and allow them each to be selected through the normal table.
llvm-svn: 357049
We were manually outputting the code we would get from selecting ANY_EXTEND. We
can save some code by just letting an ANY_EXTEND go through isel on its own.
llvm-svn: 357045
We were using OrigNBits, but that put all the nodes before the node we used to start the control computation. This caused some node earlier than the sequence we inserted to be selected before the sequence we created. We want our new sequence to be selected first since it depends on OrigNBits.
I don't have a test case. Found by reviewing the code.
llvm-svn: 356979
Normally when the nodes we use here(AND32ri8 for example) are selected their
immediates are just converted from ConstantSDNode to TargetConstantSDNode
without changing VT from the original operation VT. So we should still be
emitting them with the operation VT.
Theoretically this could expose more accurate opportunities for CSE.
llvm-svn: 356869
128 won't fit in a sign extended 8-bit immediate, but we can negate it to -128 and use the other operation. This results in a shorter encoding since the move would have used 16 or 32 bits for the immediate.
llvm-svn: 355484
These allows use to use the same set of isel patterns for sra/srl/shl which are undefined for out of range shifts and intrinsic shifts which aren't undefined.
Doing this late allows DAG combine to have every opportunity to optimize the sra/srl/shl nodes.
This removes about 7000 bytes from the isel table and simplies the td files.
llvm-svn: 355071
If the LHS has known zeros, the RHS immediate will have had bits removed. So call computeKnownBits to get the known zeroes so we can handle this case.
Differential Revision: https://reviews.llvm.org/D58475
llvm-svn: 354811
Summary:
Noticed while looking at D56052.
```
// The 'control' of BEXTR has the pattern of:
// [15...8 bit][ 7...0 bit] location
// [ bit count][ shift] name
// I.e. 0b000000011'00000001 means (x >> 0b1) & 0b11
```
I.e. we do not care about any of the bits aside from the low 16 bits.
So there is no point in doing the `slh`,`or` in 64 bits,
let's just do everything in 32 bits, and anyext if needed.
We could do that in 16 even, but we intentionally don't
zext to i16 (longer encoding IIRC),
so i'm guessing the same applies here.
Reviewers: craig.topper, andreadb, RKSimon
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56715
llvm-svn: 353073
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This cleans up the duplication we have with both intrinsic isel patterns and vselect isel patterns. This should also allow the intrinsics to get SimplifyDemandedBits support for the condition.
I've switched the canonical pattern in isel to use the X86ISD::BLENDV node instead of VSELECT. Since it always seemed weird to move from BLENDV with its relaxed rules on condition bits to VSELECT which has strict rules about all bits of the condition element being the same. Its more correct to go from VSELECT to BLENDV.
Differential Revision: https://reviews.llvm.org/D56771
llvm-svn: 351380
That's really what it is. If we didn't use intrinsics for BLENDVPS/BLENDVPD/PBLENDVB all the way to isel, this is the node we would use.
llvm-svn: 351278
Doing this late so we will prefer to fold the AND into a masked comparison first. That can be better for the live range of the mask register.
Differential Revision: https://reviews.llvm.org/D56246
llvm-svn: 350374
INC/DEC are pretty much the same as ADD/SUB except that they don't update the C flag.
This patch removes the special nodes and just pattern matches from ADD/SUB during isel if the C flag isn't being used.
I had to avoid selecting DEC is the result isn't used. This will become a SUB immediate which will turned into a CMP later by optimizeCompareInstr. This lead to the one test change where we use a CMP instead of a DEC for an overflow intrinsic since we only checked the flag.
This also exposed a hole in our RMW flag matching use of hasNoCarryFlagUses. Our root node for the match is a store and there's no guarantee that all the flag users have been selected yet. So hasNoCarryFlagUses needs to check copyToReg and machine opcodes, but it also needs to check for the pre-match SETCC, SETCC_CARRY, BRCOND, and CMOV opcodes.
Differential Revision: https://reviews.llvm.org/D55975
llvm-svn: 350245
All of these use custom isel so we can pretty easily detect the differences in the custom code in X86ISelDAGToDAG. The ISD opcodes just need to express the desired semantics not the details of how they would be selected by isel. So unifying them lets us remove the special casing from lowering.
llvm-svn: 350206
Remove the TESTmr isel patterns and add another postprocessing combine for TESTrr+ANDrm->TESTmr. We already have a postprocessing combine for TESTrr+ANDrr->TESTrr. With this we can give ANDN a chance to match first. And clean it up during post processing if we ended up with just a regular AND.
This is another step towards my plan to gut EmitTest and do more flag handling during isel matching or by using optimizeCompare.
llvm-svn: 350038
This fixes the patterns that have or/and as a root. 'and' is handled differently since thy usually have a CMP wrapped around them.
I had to look for uses of the CF flag because all these nodes have non-standard CF flag behavior. A real or/xor would always clear CF. In practice we shouldn't be using the CF flag from these nodes as far as I know.
Differential Revision: https://reviews.llvm.org/D55813
llvm-svn: 349962
This shortens the switches in X86ISelDAGToDAG.cpp to only need to check condition code instead of a list of opcodes.
This also fixes a bug where the memory forms of SETcc were missing from hasNoCarryFlagUses.
llvm-svn: 349868
The (cmp (and X, Y) 0) pattern is greedy and ends up forming a TESTrr and consuming the and when it might be better to use one of the BMI/TBM like BLSR or BLSI.
This patch moves removes the pattern from isel and adds a post processing check to combine TESTrr+ANDrr into just a TESTrr. With this patch we are able to select the BMI/TBM instructions, but we'll also emit a TESTrr when the result is compared to 0. In many cases the peephole pass will be able to use optimizeCompareInstr to remove the TEST, but its probably not perfect.
Differential Revision: https://reviews.llvm.org/D55870
llvm-svn: 349661
The only caller of this turns CMP with 0 into TEST. CMP with 0 and TEST both set OF to 0 so we should have no issues with instructions that only use OF.
Though I don't think there's any reason we would read just OF after a compare with 0 anyway. So this probably isn't an observable change.
llvm-svn: 349223
hasNoCarryFlagUses hardcoded that the flag result is 1 and used that to filter which uses were of interest. hasNoSignedComparisonUses just assumes the only result is flags and checks whether any user of the node is a CopyToReg instruction.
After this patch we now do a result number check in both and rely on the caller to provide the result number.
This shouldn't change behavior it was just an odd difference between the two functions that I noticed.
llvm-svn: 349222
MULX has somewhat improved register allocation constraints compared to the legacy MUL instruction. Both output registers are encoded instead of fixed to EAX/EDX, but EDX is used as input. It also doesn't touch flags. Unfortunately, the encoding is longer.
Prefering it whenever BMI2 is enabled is probably not optimal. Choosing it should somehow be a function of register allocation constraints like converting adds to three address. gcc and icc definitely don't pick MULX by default. Not sure what if any rules they have for using it.
Differential Revision: https://reviews.llvm.org/D55565
llvm-svn: 348975
Summary:
As discussed in previous review, and noted in the FIXME, if `X` is actually an `lshr Y, Z` (logical!),
we can fold the `Z` into 'control`, and let the `BEXTR` do this too.
We could just insert those 8 bits of shift amount into control,
but it is better to instead zero-extend them, and 'or' them in place.
We can only do this for `lshr`, not `ashr`, because we do not know that the mask cover only the bits of `Y`,
and not any of the sign-extended bits.
The obvious question is, is this actually legal to do?
I believe it is. Relevant quotes, from `Intel® 64 and IA-32 Architectures Software Developer’s Manual`, `BEXTR — Bit Field Extract`:
* `Bit 7:0 of the second source operand specifies the starting bit position of bit extraction.`
* `A START value exceeding the operand size will not extract any bits from the second source operand.`
* `Only bit positions up to (OperandSize -1) of the first source operand are extracted.`
* `All higher order bits in the destination operand (starting at bit position LENGTH) are zeroed.`
* `The destination register is cleared if no bits are extracted.`
FIXME: if we can do this, i wonder if we should prefer `BEXTR` over `BZHI` in such cases.
Reviewers: RKSimon, craig.topper, spatel, andreadb
Reviewed By: RKSimon, craig.topper, andreadb
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54095
llvm-svn: 347048
Summary:
The final pattern.
There is no test changes:
* We are looking for the pattern with one-use of it's mask,
* If the mask is one-use, D48768 will unfold it into pattern d.
* Thus, the tests have extra-use on the mask.
* Thus, only the BMI2 BZHI can be tested, and it already worked.
* So there is no BMI1 test coverage, we just assume it works since it uses the same codepath.
Reviewers: craig.topper, RKSimon
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53575
llvm-svn: 345584
This patch brings back the MOV64r0 pseudo instruction for zeroing a 64-bit register. This replaces the SUBREG_TO_REG MOV32r0 sequence we use today. Post register allocation we will rewrite the MOV64r0 to a 32-bit xor with an implicit def of the 64-bit register similar to what we do for the various XMM/YMM/ZMM zeroing pseudos.
My main motivation is to enable the spill optimization in foldMemoryOperandImpl. As we were seeing some code that repeatedly did "xor eax, eax; store eax;" to spill several registers with a new xor for each store. With this optimization enabled we get a store of a 0 immediate instead of an xor. Though I admit the ideal solution would be one xor where there are multiple spills. I don't believe we have a test case that shows this optimization in here. I'll see if I can try to reduce one from the code were looking at.
There's definitely some other machine CSE(and maybe other passes) behavior changes exposed by this patch. So it seems like there might be some other deficiencies in SUBREG_TO_REG handling.
Differential Revision: https://reviews.llvm.org/D52757
llvm-svn: 345165
This initially landed in rL345014, but was reverted in rL345017
due to sanitizer-x86_64-linux-fast buildbot failure in
check-lld (ELF/relocatable-versioned.s) test.
While i'm not yet quite sure what is the problem, one obvious
thing here is that extra truncation roundtrip.
Maybe that's it? If not, will re-revert.
Differential Revision: https://reviews.llvm.org/D53521
llvm-svn: 345027
Summary:
Continuation of D52348.
We also get the `c) x & (-1 >> (32 - y))` pattern here, because of the D48768.
I will add extra-uses into those tests and follow-up with a patch to handle those patterns too.
Reviewers: RKSimon, craig.topper
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53521
llvm-svn: 345014
I've included a fix to DAGCombiner::ForwardStoreValueToDirectLoad that I believe will prevent the previous miscompile.
Original commit message:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to rem
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the lo
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344965
Summary:
As discussed in D52304 / IRC, we now have pattern matching for
'bit extract' in two places - tablegen and `X86DAGToDAGISel`.
There are 4 patterns.
And we will have a problem with `x & (-1 >> (32 - y))` pattern.
* If the mask is one-use, then it is always unfolded into `x << (32 - y) >> (32 - y)` first.
Thus, the existing test coverage is already broken.
* If it is not one-use, then it is not unfolded, and is matched as BZHI.
* If it is not one-use, we will not match it as BEXTR. And if it is one-use, it will have been unfolded already.
So we will either not handle that pattern for BEXTR, or not have test coverage for it.
This is bad.
As discussed with @craig.topper, let's unify this matching, and do everything in `X86DAGToDAGISel`.
Then we will not have code duplication, and will have proper test coverage.
This indeed does not affect any tests, and this is great.
It means that for these two patterns, the `X86DAGToDAGISel` is identical to the tablegen version.
Please review carefully, i'm not fully sure about that intrinsic change, and introduction of the new `X86ISD` opcode.
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: llvm-commits, craig.topper
Differential Revision: https://reviews.llvm.org/D53164
llvm-svn: 344904
Summary:
Trivial continuation of D52304.
While this pattern is not canonical, we do select it in the BZHI case,
so this should not be any different.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52348
llvm-svn: 344902
Summary:
Theoretically this was done to simplify the amount of isel patterns that were needed. But it also meant a substantial number of our isel patterns have to match an explicit bitcast. By making the vXi32/vXi16/vXi8 types legal for loads, DAG combiner should be able to change the load type to remove the bitcast.
I had to add some additional plain load instruction patterns and a few other special cases, but overall the isel table has reduced in size by ~12000 bytes. So it looks like this promotion was hurting us more than helping.
I still have one crash in vector-trunc.ll that I'm hoping @RKSimon can help with. It seems to relate to using getTargetConstantFromNode on a load that was shrunk due to an extract_subvector combine after the constant pool entry was created. So we end up decoding more mask elements than the load size.
I'm hoping this patch will simplify the number of patterns needed to remove the and/or/xor promotion.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits, RKSimon
Differential Revision: https://reviews.llvm.org/D53306
llvm-svn: 344877
Summary:
These nodes exist to overcome an isel problem where we can generate a zero extend of an AH register followed by an extract subreg, and another zero extend. The first zero extend exists to avoid a partial register update copying the AH register into the low 8-bits. The second zero extend exists if the user wanted the remainder zero extended.
To make this work we had a DAG combine to morph the DIVREM opcode to a special opcode that included the extend. But then we had to add the new node to computeKnownBits and computeNumSignBits to process the extension portion.
This patch instead removes all of that and adds a late peephole to detect the two extends.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53449
llvm-svn: 344874
There is no guarantee the root is at the end if isel created any nodes without morphing them. This includes the nodes created by manual isel from C++ code in X86ISelDAGToDAG.
This is similar to r333415 from PowerPC which is where I originally stole the peephole loop from.
I don't have a test case, but without this a future patch doesn't work which is how I found it.
llvm-svn: 344808
Allows to disable direct TLS segment access (%fs or %gs). GCC supports
a similar flag, it can be useful in some circumstances, e.g. when a thread
context block needs to be updated directly from user space. More info
and specific use cases: https://bugs.llvm.org/show_bug.cgi?id=16145
There is another revision for clang as well.
Related: D53102
All X86 CodeGen tests appear to pass:
```
[46/47] Running lit suite /SourceCache/llvm-trunk-8.0/test/CodeGen
Testing Time: 23.17s
Expected Passes : 3801
Expected Failures : 15
Unsupported Tests : 8021
```
Reviewed by: Craig Topper.
Patch by nruslan (Ruslan Nikolaev).
Differential Revision: https://reviews.llvm.org/D53103
llvm-svn: 344723
Without this we match the CMP+AND to a TEST and then match the SHR separately. I'm trusting analyzeCompare to remove the TEST during the peephole pass. Otherwise we need to check the flag users to see if they only use the Z flag.
This recovers a case lost by r344270.
Differential Revision: https://reviews.llvm.org/D53310
llvm-svn: 344649
This is an alternative to D53080 since I think using a BEXTR for a shifted mask is definitely an improvement when the shl can be absorbed into addressing mode. The other cases I'm less sure about.
We already have several tricks for handling an and of a shift in address matching. This adds a new case for BEXTR.
I've moved the BEXTR matching code back to X86ISelDAGToDAG to allow it to match. I suppose alternatively we could directly emit a X86ISD::BEXTR node that isel could pattern match. But I'm trying to view BEXTR matching as an isel concern so DAG combine can see 'and' and 'shift' operations that are well understood. We did lose a couple cases from tbm_patterns.ll, but I think there are ways to recover that.
I've also put back the manual load folding code in matchBEXTRFromAnd that I removed a few months ago in r324939. This gives us some more freedom to make decisions based on the ability to fold a load. I haven't done anything with that yet.
Differential Revision: https://reviews.llvm.org/D53126
llvm-svn: 344270
Summary:
As discussed in D48491, we can't really do this in the TableGen,
since we need to produce *two* instructions. This only implements
one single pattern. The other 3 patterns will be in follow-ups.
I'm not sure yet if we want to also fuse shift into here
(i.e `(x >> start) & ...`)
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D52304
llvm-svn: 344224
Remove tryFoldVecLoad since tryFoldLoad would call IsProfitableToFold and pick up the new check.
This saves about 5K out of ~600K on the generated isel table.
llvm-svn: 344189
Summary:
As discussed in [[ https://bugs.llvm.org/show_bug.cgi?id=38938 | PR38938 ]],
we fail to emit `BEXTR` if the mask is shifted.
We can't deal with that in `X86DAGToDAGISel` `before the address mode for the inc is selected`,
and we can't really do it in the normal DAGCombine, because we don't have generic `ISD::BitFieldExtract` node,
and if we simply turn the shifted mask into a normal mask + shift-left, it will be folded back.
So it would seem X86ISelLowering is the place to handle this.
This patch only moves the matchBEXTRFromAnd()
from X86DAGToDAGISel to X86ISelLowering.
It does not add support for the 'shifted mask' pattern.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52426
llvm-svn: 344179
This includes a fix to prevent i16 compares with i32/i64 ands from being shrunk if bit 15 of the and is set and the sign bit is used.
Original commit message:
Currently we skip looking through truncates if the sign flag is used. But that's overly restrictive.
It's safe to look through the truncate as long as we ensure one of the 3 things when we shrink. Either the MSB of the mask at the shrunken size isn't set. If the mask bit is set then either the shrunk size needs to be equal to the compare size or the sign
There are still missed opportunities to shrink a load and fold it in here. This will be fixed in a future patch.
llvm-svn: 343539
There's a subtle bug in the handling of truncate from i32/i64 to i32 without minsize.
I'll be adding more test cases and trying to find a fix.
llvm-svn: 343516
This patch adds load folding support to the test shrinking code. This was noticed missing in the review for D52669
Differential Revision: https://reviews.llvm.org/D52699
llvm-svn: 343499
Currently we skip looking through truncates if the sign flag is used. But that's overly restrictive.
It's safe to look through the truncate as long as we ensure one of the 3 things when we shrink. Either the MSB of the mask at the shrunken size isn't set. If the mask bit is set then either the shrunk size needs to be equal to the compare size or the sign flag needs to be unused.
There are still missed opportunities to shrink a load and fold it in here. This will be fixed in a future patch.
Differential Revision: https://reviews.llvm.org/D52669
llvm-svn: 343498
Summary:
This function turns (X >> C1) & C2 into a BMI BEXTR or TBM BEXTRI instruction. For BMI BEXTR we have to materialize an immediate into a register to feed to the BEXTR instruction.
The BMI BEXTR instruction is 2 uops on Intel CPUs. It looks like on SKL its one port 0/6 uop and one port 1/5 uop. Despite what Agner's tables say. I know one of the uops is a regular shift uop so it would have to go through the port 0/6 shifter unit. So that's the same or worse execution wise than the shift+and which is one 0/6 uop and one 0/1/5/6 uop. The move immediate into register is an additional 0/1/5/6 uop.
For now I've limited this transform to AMD CPUs which have a single uop BEXTR. If may also might make sense if we can fold a load or if the and immediate is larger than 32-bits and can't be encoded as a sign extended 32-bit value or if LICM or CSE can hoist the move immediate and share it. But we'd need to look more carefully at that. In the regression I looked at it doesn't look load folding or large immediates were occurring so the regression isn't caused by the loss of those. So we could try to be smarter here if we find a compelling case.
Reviewers: RKSimon, spatel, lebedev.ri, andreadb
Reviewed By: RKSimon
Subscribers: llvm-commits, andreadb, RKSimon
Differential Revision: https://reviews.llvm.org/D52570
llvm-svn: 343399
Previously we only handled loads in operand 0, but nothing guarantees the load will be operand 0 for commutable operations.
Differential Revision: https://reviews.llvm.org/D51768
llvm-svn: 341675
The peephole pass likely gets this normally, but we should be doing it during isel.
Ideally we'd just make the X86adc_flag pattern SDNPCommutable, but the tablegen doesn't handle that when one of the operands is a register reference.
llvm-svn: 341596
The commit that added this functionality:
rL322957
may be causing/exposing a miscompile in PR38648:
https://bugs.llvm.org/show_bug.cgi?id=38648
so allow enabling/disabling to make debugging easier.
llvm-svn: 340540
subtarget features for indirect calls and indirect branches.
This is in preparation for enabling *only* the call retpolines when
using speculative load hardening.
I've continued to use subtarget features for now as they continue to
seem the best fit given the lack of other retpoline like constructs so
far.
The LLVM side is pretty simple. I'd like to eventually get rid of the
old feature, but not sure what backwards compatibility issues that will
cause.
This does remove the "implies" from requesting an external thunk. This
always seemed somewhat questionable and is now clearly not desirable --
you specify a thunk the same way no matter which set of things are
getting retpolines.
I really want to keep this nicely isolated from end users and just an
LLVM implementation detail, so I've moved the `-mretpoline` flag in
Clang to no longer rely on a specific subtarget feature by that name and
instead to be directly handled. In some ways this is simpler, but in
order to preserve existing behavior I've had to add some fallback code
so that users who relied on merely passing -mretpoline-external-thunk
continue to get the same behavior. We should eventually remove this
I suspect (we have never tested that it works!) but I've not done that
in this patch.
Differential Revision: https://reviews.llvm.org/D51150
llvm-svn: 340515
Inspired by what AArch64 does for shifts, this patch attempts to replace shift amounts with neg if we can.
This is done directly as part of isel so its as late as possible to avoid breaking some BZHI patterns since those patterns need an unmasked (32-n) to be correct.
To avoid manual load folding and custom instruction selection for the negate. I've inserted new nodes in the DAG above the shift node in topological order.
Differential Revision: https://reviews.llvm.org/D48789
llvm-svn: 340441
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
There are a lot of permutations of types here generating a lot of patterns in the isel table. It's more efficient to just ReplaceUses and RemoveDeadNode from the Select function.
The test changes are because we have a some shuffle patterns that have a bitcast as their root node. But the behavior is identical to another instruction whose pattern doesn't start with a bitcast. So this isn't a functional change.
llvm-svn: 338824
If the producing instruction is legacy encoded it doesn't implicitly zero the upper bits. This is important for the SHA instructions which don't have a VEX encoded version. We might also be able to hit this with the incomplete f128 support that hasn't been ported to VEX.
llvm-svn: 338812
Don't try to generate large PIC code for non-ELF targets. Neither COFF
nor MachO have relocations for large position independent code, and
users have been using "large PIC" code models to JIT 64-bit code for a
while now. With this change, if they are generating ELF code, their
JITed code will truly be PIC, but if they target MachO or COFF, it will
contain 64-bit immediates that directly reference external symbols. For
a JIT, that's perfectly fine.
llvm-svn: 337740
We were accidentally connecting it to result 0 instead of result 1. This was caught by the machine verifier that noticed the flags were dead, but we were using them somehow. I'm still not clear what actually happened downstream.
llvm-svn: 336925
We can instead block the load folding isProfitableToFold. Then isel will emit a register->register move for the zeroing part and a separate load. The PostProcessISelDAG should be able to remove the register->register move.
This saves us patterns and fixes the fact that we only had unaligned load patterns. The test changes show places where we should have been using an aligned load.
llvm-svn: 336828
This is a follow up to r335753. At the time I forgot about isProfitableToFold which makes this pretty easy.
Differential Revision: https://reviews.llvm.org/D48706
llvm-svn: 335895
Reverting because this is causing failures in the LLDB test suite on
GreenDragon.
LLVM ERROR: unsupported relocation with subtraction expression, symbol
'__GLOBAL_OFFSET_TABLE_' can not be undefined in a subtraction
expression
llvm-svn: 335894
BMI2 added new shift by register instructions that have the ability to fold a load.
Normally without doing anything special isel would prefer folding a load over folding an immediate because the load folding pattern has higher "complexity". This would require an instruction to move the immediate into a register. We would rather fold the immediate instead and have a separate instruction for the load.
We used to enforce this priority by artificially lowering the complexity of the load pattern.
This patch changes this to instead reject the load fold in isProfitableToFoldLoad if there is an immediate. This is more consistent with other binops and feels less hacky.
llvm-svn: 335804
If we turn X86ISD::AND into ISD::AND, we delete N. But we were continuing onto the next block of code even though N no longer existed.
Just happened to notice it. I assume asan didn't notice it because we explicitly unpoison deleted nodes and give them a DELETE_NODE opcode.
llvm-svn: 335787
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
I restricted the MCJIT/eh-lg-pic.ll test to Linux, since the large PIC
code model is not implemented for MachO yet.
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335508
Summary:
The large code model allows code and data segments to exceed 2GB, which
means that some symbol references may require a displacement that cannot
be encoded as a displacement from RIP. The large PIC model even relaxes
the assumption that the GOT itself is within 2GB of all code. Therefore,
we need a special code sequence to materialize it:
.LtmpN:
leaq .LtmpN(%rip), %rbx
movabsq $_GLOBAL_OFFSET_TABLE_-.LtmpN, %rax # Scratch
addq %rax, %rbx # GOT base reg
From that, non-local references go through the GOT base register instead
of being PC-relative loads. Local references typically use GOTOFF
symbols, like this:
movq extern_gv@GOT(%rbx), %rax
movq local_gv@GOTOFF(%rbx), %rax
All calls end up being indirect:
movabsq $local_fn@GOTOFF, %rax
addq %rbx, %rax
callq *%rax
The medium code model retains the assumption that the code segment is
less than 2GB, so calls are once again direct, and the RIP-relative
loads can be used to access the GOT. Materializing the GOT is easy:
leaq _GLOBAL_OFFSET_TABLE_(%rip), %rbx # GOT base reg
DSO local data accesses will use it:
movq local_gv@GOTOFF(%rbx), %rax
Non-local data accesses will use RIP-relative addressing, which means we
may not always need to materialize the GOT base:
movq extern_gv@GOTPCREL(%rip), %rax
Direct calls are basically the same as they are in the small code model:
They use direct, PC-relative addressing, and the PLT is used for calls
to non-local functions.
This patch adds reasonably comprehensive testing of LEA, but there are
lots of interesting folding opportunities that are unimplemented.
Reviewers: chandlerc, echristo
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D47211
llvm-svn: 335297
I don't believe there is any real reason to have separate X86 specific opcodes for vector compares. Setcc has the same behavior just uses a different encoding for the condition code.
I had to change the CondCodeAction for SETLT and SETLE to prevent some transforms from changing SETGT lowering.
Differential Revision: https://reviews.llvm.org/D43608
llvm-svn: 335173
Some of the calls to hasSingleUseFromRoot were passing the load itself. If the load's chain result has a user this would count against that. By getting the true parent of the match and ensuring any intermediate between the match and the load have a single use we can avoid this case. isLegalToFold will take care of checking users of the load's data output.
This fixed at least fma-scalar-memfold.ll to succed without the peephole pass.
llvm-svn: 334908
All of the cases are already wrapped in curly braces so declaring a variable there isn't an issue. And the variables aren't assigned or used in the larger scope.
llvm-svn: 334436
Only the bottom 16-bits of BEXTR's control op are required (0:8 INDEX, 15:8 LENGTH).
Differential Revision: https://reviews.llvm.org/D47690
llvm-svn: 334083
This code should really do exactly the same thing for 32-bit x86 and
64-bit small code models, with the exception that RIP-relative
addressing can't use base and index registers.
llvm-svn: 332893
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
See r331124 for how I made a list of files missing the include.
I then ran this Python script:
for f in open('filelist.txt'):
f = f.strip()
fl = open(f).readlines()
found = False
for i in xrange(len(fl)):
p = '#include "llvm/'
if not fl[i].startswith(p):
continue
if fl[i][len(p):] > 'Config':
fl.insert(i, '#include "llvm/Config/llvm-config.h"\n')
found = True
break
if not found:
print 'not found', f
else:
open(f, 'w').write(''.join(fl))
and then looked through everything with `svn diff | diffstat -l | xargs -n 1000 gvim -p`
and tried to fix include ordering and whatnot.
No intended behavior change.
llvm-svn: 331184
Summary:
Previously the flag intrinsics always used the index instructions even if a mask instruction also exists.
To fix fix this I've created a single ISD node type that returns index, mask, and flags. The SelectionDAG CSE process will merge all flavors of intrinsics with the same inputs to a s ingle node. Then during isel we just have to look at which results are used to know what instruction to generate. If both mask and index are used we'll need to emit two instructions. But for all other cases we can emit a single instruction.
Since I had to do manual isel anyway, I've removed the pseudo instructions and custom inserter code that was working around tablegen limitations with multiple implicit defs.
I've also renamed the recently added sse42.ll test case to sttni.ll since it focuses on that subset of the sse4.2 instructions.
Reviewers: chandlerc, RKSimon, spatel
Reviewed By: chandlerc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D46202
llvm-svn: 331091
Prefer to use the 32-bit AND with immediate instead.
Primarily I'm doing this to ensure that immediates created by shrinkAndImmediate will always get absorbed into the AND. But I do believe this would be a reduction in the number of uops that need to execute. Ideally we should shrink the 'and' and the 'load' during DAG combine to re-enable the fold.
Fixes PR37063.
llvm-svn: 329667
Fangrui Song