Summary:
SSE1 only supports v4f32. But does have instructions like movlps/movhps that load/store 64-bits of memory.
This patch breaks the connection between the node VT of the vzext_load/vextract_store patterns and the memory VT. Enabling a v4f32 node with a 64-bit memory VT. I've used i64 as the memory VT here. I've written the PatFrag predicate to just check the store size not the specific VT. I think the VT will only matter for CSE purposes. We could use v2f32, but if we want to start using these operations in more places a simple integer type might make the most sense.
I'd like to maybe use this same thing for SSE2 and later as well, but that will need more work to be supported by EltsFromConsecutiveLoads to avoid regressing lit tests. I'd maybe also like to combine bitcasts with these load/stores nodes now that the types are disconnected. And I'd also like to consider canonicalizing (scalar_to_vector + load) to vzext_load.
If you want I can split the mechanical tablegen stuff where I added the 32/64 off from the sse1 change.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64528
llvm-svn: 366034
We can use the C flag from NEG to detect that the input was zero.
Really we could probably use the Z flag too. But C matches what
we'd do for usubo 0, X.
Haven't found a test case for this due to the usubo formation
in CGP. But I verified if I comment out the CGP code this
transformation catches some of the same cases.
llvm-svn: 365929
Follow up to D58597, where it was noted that the commuted ISD::SUB variant
was having problems with lack of combines.
See also D63958 where we untangled setcc/sub pairs.
Differential Revision: https://reviews.llvm.org/D58875
llvm-svn: 365791
Summary:
As of binutils 2.32, ld has a bogus TLS relaxation error when the GD/LD
code sequence using R_X86_64_GOTPCREL (instead of R_X86_64_GOTPCRELX) is
attempted to be relaxed to IE/LE (binutils PR24784). gold and lld are good.
In gcc/config/i386/i386.md, there is a configure-time check of as/ld
support and the GOT relaxation will not be used if as/ld doesn't support
it:
if (flag_plt || !HAVE_AS_IX86_TLS_GET_ADDR_GOT)
return "call\t%P2";
return "call\t{*%p2@GOT(%1)|[DWORD PTR %p2@GOT[%1]]}";
In clang, -DENABLE_X86_RELAX_RELOCATIONS=OFF is the default. The ld.bfd
bogus error can be reproduced with:
thread_local int a;
int main() { return a; }
clang -fno-plt -fpic a.cc -fuse-ld=bfd
GOTPCRELX gained relative good support in 2016, which is considered
relatively new. It is even difficult to conditionally default to
-DENABLE_X86_RELAX_RELOCATIONS=ON due to cross compilation reasons. So
work around the ld.bfd bug by only using GOT when GOTPCRELX is enabled.
Reviewers: dalias, hjl.tools, nikic, rnk
Reviewed By: nikic
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64304
llvm-svn: 365752
We use the functions that convert to three address to do the
conversion, but changing an 8 or 16 bit will cause it to create
a virtual register. This can't be done after register allocation
where this pass runs.
I've switched the pass completely to a white list of instructions
that can be converted to LEA instead of a blacklist that was
incorrect. This will avoid surprises if we enhance the three
address conversion function to include additional instructions
in the future.
Fixes PR42565.
llvm-svn: 365720
Unfortunately subo formation in CGP prevents obvious ways of
testing this.
But we already have BLSI in here and the flag behavior is
well understood.
Might become more useful if we improve PR42571.
llvm-svn: 365702
This renames the type so it doesn't sound like its based off the load size - as we're moving towards supporting combining loads of different sizes.
llvm-svn: 365655
Cache the LoadSDNode nodes so we can easily map to/from the element index instead of packing them together - this will be useful for future patches for PR16739 etc.
llvm-svn: 365620
This patch checks to see if the vector element loads are based off a dereferenceable pointer that covers the entire vector width, in which case we don't need to have element loads at both extremes of the vector width - just the start (base pointer) of it.
Another step towards partial vector loads......
Differential Revision: https://reviews.llvm.org/D64205
llvm-svn: 365614
This should prevent doing this on pre-sse4.1 targets or for 256
bit vectors without avx2.
I don't know of a failure from this. Op legalization will probably
take care of, but seemed better to be safe.
llvm-svn: 365577
Basically the problem is that X86 doesn't set the Fast flag from
allowsMemoryAccess on certain CPUs due to slow unaligned memory
subtarget features. This prevents bitcasts from being folded into
loads and stores. But all vector loads and stores of the same width
are the same cost on X86.
This patch merges the allowsMemoryAccess call into isLoadBitCastBeneficial to allow X86 to skip it.
Differential Revision: https://reviews.llvm.org/D64295
llvm-svn: 365549
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
Summary:
This makes it so that IR files using triples without an environment work
out of the box, without normalizing them.
Typically, the MSVC behavior is more desirable. For example, it tends to
enable things like constant merging, use of associative comdats, etc.
Addresses PR42491
Reviewers: compnerd
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64109
llvm-svn: 365387
This can help avoid a copy or enable load folding.
On SSE4.1 targets we can commute it to blendi instead.
I had to make shufpd with a 0x02 immediate commutable as well
since we expect commuting to be reversible.
llvm-svn: 365292
These patterns are the same as the MOVLPDmr and MOVHPDmr patterns,
but with a bitcast at the end. We can just select the PD instruction
and let execution domain fixing switch to PS.
llvm-svn: 365267
These narrow the load so we can only do it if the load isn't
volatile.
There also tests in vector-shuffle-128-v4.ll that this should
support, but we don't seem to fold bitcast+load on pre-sse4.2
targets due to the slow unaligned mem 16 flag.
llvm-svn: 365266
The Size either needs to be 0 meaning we aren't folding
a stack reload. Or the stack slot needs to be at least
16 bytes. I've also added a paranoia check ensure the
RCSize is at leat 16 bytes as well. This avoids any
FR32/FR64 surprises, but I think we already filtered
those earlier.
All of our test case have Size as either 0 or 16 and
RCSize == 16. So the Size <= 16 check worked for those
cases.
llvm-svn: 365234
These patterns use 128-bit loads, but the instructions only load
64-bits. We shouldn't narrow the load if its volatile.
Fixes another variant of PR42079
llvm-svn: 365225
This was identical to a pattern for MOVPQI2QImr with a bitcast
as an input. But we should be able to turn MOVPQI2QImr into
MOVLPSmr in the execution domain fixup pass so we shouldn't
need this.
llvm-svn: 365224
Revision r365061 changed a skip of debug instructions for a skip
of meta instructions. This is not safe, as IMPLICIT_DEF is classed
as a meta instruction.
llvm-svn: 365202
Revision r365061 changed a skip of debug instructions for a skip
of meta instructions. This is not safe, as IMPLICIT_DEF is classed
as a meta instruction.
llvm-svn: 365198
Summary:
We attempt to prevent folding immediates with multiple users under optsize. But we only do this from store nodes and X86ISD::ADD/SUB/XOR/OR/AND patterns. We don't do it for ISD::ADD/SUB/XOR/OR/AND even though we count them as users when deciding whether to fold into other nodes. This leads to situations where we block folding to a compare for example, but still fold into an AND or OR as seen in PR27202.
Unfortunately touching the isel patterns in tablegen for the ISD::ADD/SUB/XOR/OR/AND opcodes will cause the patterns to be unusable for fast isel. And we don't have a way to make a fast isel only pattern.
To workaround this, this patch adds custom isel in front of the isel table that will select the non-immediate forms if the immediate has additional users. This may create some issues for ANDN and NOT matching. And there's room for improvement with unsigned 32 immediates on 64-bit AND.
This patch needs more thorough test cases, but I wanted to get feedback on the direction. Please send me any other test cases you've seen in the wild.
I think we probably have the same issue with the immediate matching when we fold RMW from X86ISD::ADD/SUB/XOR/OR/AND. And our TEST immedaite shrinking logic. Our cost modeling for immediates that can fit in a sign extended 8-bit immediate on a 16/32/64 bit operation is completely wrong.
I also wonder if we should update the ConstantHoisting cost model and block folding for "opaque" constants. But of course constants can still be created by DAG combine and lowering optimizations.
Fixes PR27202
Reviewers: spatel, RKSimon, andreadb
Reviewed By: RKSimon
Subscribers: jsji, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59909
llvm-svn: 365163
Bitcast v4i32 to v8f32 and back again - it might be worth adding isel patterns for X86PShufd v8i32 on AVX1 targets like we did for X86Blendi to avoid the bitcasts?
llvm-svn: 365125
This patch generalizes the fix in D61680 to ignore all meta instructions,
not just debug info.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D62605
llvm-svn: 365061
We previously marked all the tests with branch funnels as
`-verify-machineinstrs=0`.
This is an attempt to fix it.
1) `ICALL_BRANCH_FUNNEL` has no defs. Mark it as `let OutOperandList =
(outs)`
2) After that we hit an assert: ``` Assertion failed: (Op.getValueType()
!= MVT::Other && Op.getValueType() != MVT::Glue && "Chain and glue
operands should occur at end of operand list!"), function AddOperand,
file
/Users/francisvm/llvm/llvm/lib/CodeGen/SelectionDAG/InstrEmitter.cpp,
line 461. ```
The chain operand was added at the beginning of the operand list. Move
that to the end.
3) After that we hit another verifier issue in the pseudo expansion
where the registers used in the cmps and jmps are not added to the
livein lists. Add the `EFLAGS` to all the new MBBs that we create.
PR39436
Differential Review: https://reviews.llvm.org/D54155
llvm-svn: 365058
If we have more then 2 shuffle ops to combine, try to use combineX86ShuffleChainWithExtract to see if some are from the same super vector.
llvm-svn: 365050
iff the number of elements doesn't change.
This gets around an issue with combineX86ShuffleChain not being able to hint which domain is preferred for shuffles that can be done with either.
Fixes regression introduced in rL365041
llvm-svn: 365044
This better accounts for the cost/benefit of removing extract_subvectors from the shuffle and will be more useful in future patches.
The vpermq predicate regression will be fixed shortly.
llvm-svn: 365041
Assert that the shift amount is in range and create vXi8 shift masks in a way that doesn't cause MSVC/cppcheck shift result is truncated then extended warnings.
llvm-svn: 365024
Don't use APInt::getZExtValue() if you can avoid it - eventually someone will call it with i128 or something that doesn't fit into 64-bits.
In this case it was completely superfluous as we'd moved the rest of the code to always use APInt.
Fixes the <1 x i128> addition bug in PR42486
llvm-svn: 364953
Similar for (V)MOVSD. Ultimately, I'd like to see about folding
scalar_to_vector+load to vzload. Which would select as (V)MOVSSrm
so this is closer to that.
llvm-svn: 364948
Pull out CombineShuffleWithExtract lambda to new combineX86ShuffleChainWithExtract wrapper and refactored it to handle more than 2 shuffle inputs - this will allow combineX86ShufflesRecursively to call this in a future patch.
llvm-svn: 364924
We were relying on combineX86ShufflesRecursively to handle this - this patch gets it done earlier which should make it easier for other code to use resolveTargetShuffleInputsAndMask.
llvm-svn: 364906
v2i64 vzload defines a 64-bit memory access. It doesn't look like
we have any coverage for this either way.
Also remove some vzload usages where the instruction loads only
16-bits.
llvm-svn: 364851
These instructions only read 64-bits of memory so we shouldn't
allow a full vector width load to be pattern matched in case it
is marked volatile.
Instead allow vzload or scalar_to_vector+load.
Also add a DAG combine to turn full vector loads into vzload when
used by one of these instructions if the load isn't volatile.
This fixes another case for PR42079
llvm-svn: 364838
The function findPotentialBlockers may consider debug info instructions as
potential blockers and may stop searching for a store-load pair prematurely.
This patch corrects this and tests the cases where the store is separated
from the load by more than InspectionLimit debug instructions.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D62408
llvm-svn: 364829
We can already widenSubVector to a specific type (of the same scalar type) - this variant just specifies the target vector size.
This will be useful when CombineShuffleWithExtract relaxes the need to have the same scalar type for all shuffle operand subvector sources.
llvm-svn: 364803
We had a bunch of vector size legality checks for the source type
based on feature flags, but we didn't check the destination type at
all beyond ensuring that it was a "simple" type. But this allowed
the destination to be i128 which isn't legal.
This commit changes the code to use TLI's isTypeLegal logic in
place of the all the subtarget checks. Then additionally checks
that the source and dest are vectors.
Fixes 42452
llvm-svn: 364729
But only when the load isn't volatile.
This improves load folding during isel where we only have vzload
and scalar_to_vector+load patterns. We can't have full vector load
isel patterns for the same volatile load issue.
Also add some missing masked cvtsi2fp/cvtui2fp with vzload patterns.
llvm-svn: 364728
We already had patterns that used scalar_to_vector+load. But we can
also have a vzload.
Found while investigating combining scalar_to_vector+load to vzload.
llvm-svn: 364726
AVX masked loads only support 0 as the value for masked off elements.
So we need an extra blend to support other values. Previously we
expanded the masked load to two instructions with isel patterns.
With this patch we now insert the vselect during lowering and it
will be separately selected as a blend.
llvm-svn: 364718
The cmov node used to sometimes return a glue result (and that's what
'flag' meant in this context), but that was removed with D38664.
llvm-svn: 364687
We were requiring that both shuffle operands were EXTRACT_SUBVECTORs, but we can relax this to only require one of them to be.
Also, we shouldn't bother attempting this if both operands are from the lowest subvector (or not EXTRACT_SUBVECTOR at all).
llvm-svn: 364644
We already had the infrastructure for this, but were waiting for the fix for a number of regressions which were handled by the recent shuffle(extract_subvector(),extract_subvector()) -> extract_subvector(shuffle()) shuffle combines
llvm-svn: 364569
Handle call instruction replacements and deletions in order to preserve
valid state of the call site info of the MachineFunction.
NOTE: If the call site info is enabled for a new target, the assertion from
the MachineFunction::DeleteMachineInstr() should help to locate places
where the updateCallSiteInfo() should be called in order to preserve valid
state of the call site info.
([10/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D61062
llvm-svn: 364536
While lowering calls, collect info about registers that forward arguments
into following function frame. We store such info into the MachineFunction
of the call. This is used very late when dumping DWARF info about
call site parameters.
([9/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60715
llvm-svn: 364516
Change the interface of CallLowering::lowerCall to accept several
virtual registers for each argument, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63551
llvm-svn: 364512
Change the interface of CallLowering::lowerCall to accept several
virtual registers for the call result, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63550
llvm-svn: 364511
Change the interface of CallLowering::lowerFormalArguments to accept
several virtual registers for each formal argument, instead of just one.
This is a follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660. lowerCall
will be refactored in the same way in follow-up patches.
With this change, we forward the virtual registers generated for
aggregates to CallLowering. Therefore, the target can decide itself
whether it wants to handle them as separate pieces or use one big
register. We also copy the pack/unpackRegs helpers to CallLowering to
facilitate this.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
AArch64 seems to have had a bug when lowering e.g. [1 x i8*], which was
put into a s64 instead of a p0. Added a test-case which illustrates the
problem more clearly (it crashes without this patch) and fixed the
existing test-case to expect p0.
AMDGPU has been updated to unpack into the virtual registers for
kernels. I think the other code paths fall back for aggregates, so this
should be NFC.
Mips doesn't support aggregates yet, so it's also NFC.
x86 seems to have code for dealing with aggregates, but I couldn't find
the tests for it, so I just added a fallback to DAGISel if we get more
than one virtual register for an argument.
Differential Revision: https://reviews.llvm.org/D63549
llvm-svn: 364510
Allow CallLowering::ArgInfo to contain more than one virtual register.
This is useful when passes split aggregates into several virtual
registers, but need to also provide information about the original type
to the call lowering. Used in follow-up patches.
Differential Revision: https://reviews.llvm.org/D63548
llvm-svn: 364509
Without the fix gcc 7.4.0 complains with
../lib/Target/X86/X86ISelLowering.cpp: In function 'bool getFauxShuffleMask(llvm::SDValue, llvm::SmallVectorImpl<int>&, llvm::SmallVectorImpl<llvm::SDValue>&, llvm::SelectionDAG&)':
../lib/Target/X86/X86ISelLowering.cpp:6690:36: error: enumeral and non-enumeral type in conditional expression [-Werror=extra]
int Idx = (ZeroMask[j] ? SM_SentinelZero : (i + j + Ofs));
~~~~~~~~~~~~^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
cc1plus: all warnings being treated as errors
llvm-svn: 364507
This patch rewrites the loop iteration to only visit every other element starting with element 0. And we work on the "even" element and "next" element at the same time. The "First" logic has been moved to the bottom of the loop and doesn't run on every element. I believe it could create dangling nodes previously since we didn't check if we were going to use SCALAR_TO_VECTOR for the first insertion. I got rid of the "First" variable and just do a null check on V which should be equivalent. We also no longer use undef as the starting V for vectors with no zeroes to avoid false dependencies. This matches v8i16.
I've changed all the extends and OR operations to use MVT::i32 since that's what they'll be promoted to anyway. I've tried to use zero_extend only when necessary and use any_extend otherwise. This resulted in some improvements in tests where we are now able to promote aligned (i32 (extload i8)) to a 32-bit load.
Differential Revision: https://reviews.llvm.org/D63702
llvm-svn: 364469
This was trying to optimize concat_vectors with zero of setcc or
kand instructions. But I think it produced the same code we
produce for a concat_vectors with 0 even it it doesn't come from
one of those operations.
llvm-svn: 364463
Create a per-byte shuffle mask based on the computeKnownBits from each operand - if for each byte we have a known zero (or both) then it can be safely blended.
Fixes PR41545
llvm-svn: 364458
We have (almost) no target opcodes that have scalar/vector equivalents - for now assume we can't scalarize them (we can add exceptions if we need to).
llvm-svn: 364429
Summary:
The one thing of note here is that the 'bitwidth' constant (32/64) was previously pessimistic.
Given `x & (-1 >> (C - z))`, we were taking `C` to be `bitwidth(x)`, but in reality
we want `(-1 >> (C - z))` pattern to mean "low z bits must be all-ones".
And for that, `C` should be `bitwidth(-1 >> (C - z))`, i.e. of the shift operation itself.
Last pattern D does not seem to exhibit any of these truncation issues.
Although it has the opposite problem - if we extract low bits (no shift) from i64,
and then truncate to i32, then we fail to shrink this 64-bit extraction into 32-bit extraction.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62806
llvm-svn: 364419
Summary:
(Not so) boringly identical to pattern a (D62786)
Not yet sure how do deal with the last pattern c.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62793
llvm-svn: 364418
Summary:
Finally tying up loose ends here.
The problem is quite simple:
If we have pattern `(x >> start) & (1 << nbits) - 1`,
and then truncate the result, that truncation will be propagated upwards,
into the `and`. And that isn't currently handled.
I'm only fixing pattern `a` here,
the same fix will be needed for patterns `b`/`c` too.
I *think* this isn't missing any extra legality checks,
since we only look past truncations. Similary, i don't think
we can get any other truncation there other than i64->i32.
Reviewers: craig.topper, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62786
llvm-svn: 364417
Ideally this needs to be a generic combine in DAGCombiner::visitEXTRACT_SUBVECTOR but there's some nasty regressions in aarch64 due to neon shuffles not handling bitcasts at all.....
llvm-svn: 364407
truncateVectorWithPACK is often used in conjunction with ComputeNumSignBits which struggles when peeking through bitcasts.
This fix tries to avoid bitcast(shuffle(bitcast())) patterns in the 256-bit 64-bit sublane shuffles so we can still see through at least until lowering when the shuffles will need to be bitcasted to widen the shuffle type.
llvm-svn: 364401
I believe these all get canonicalized to vzext_movl. The only case where that wasn't true was when the load was loadi32 and the load was an extload aligned to 32 bits. But that was fixed in r364207.
Differential Revision: https://reviews.llvm.org/D63701
llvm-svn: 364337
We currently have some isel patterns for treating vzmovl+load the same as vzload, but that shrinks the load which we shouldn't do if the load is volatile.
Rather than adding isel checks for volatile. This patch removes the patterns and teachs DAG combine to merge them into vzload when its legal to do so.
Differential Revision: https://reviews.llvm.org/D63665
llvm-svn: 364333
In LowerBuildVectorv16i8 we took care to use an any_extend if the first pair is in the lower 16-bits of the vector and no elements are 0. So bits [31:16] will be undefined. But we still emitted a vzext_movl to ensure that bits [127:32] are 0. If we don't need any zeroes we should be consistent and make all of 127:16 undefined.
In LowerBuildVectorv8i16 we can just delete the vzext_movl code because we only use the scalar_to_vector when there are no zeroes. So the vzext_movl is always unnecessary.
Found while investigating whether (vzext_movl (scalar_to_vector (loadi32)) patterns are necessary. At least one of the cases where they were necessary was where the loadi32 matched 32-bit aligned 16-bit extload. Seemed weird that we required vzext_movl for that case.
Differential Revision: https://reviews.llvm.org/D63700
llvm-svn: 364207
This patch does a few things to start cleaning up the isFNEG function.
-Remove the Op0/Op1 peekThroughBitcast calls that seem unnecessary. getTargetConstantBitsFromNode has its own peekThroughBitcast inside. And we have a separate peekThroughBitcast on the return value.
-Add a check of the scalar size after the first peekThroughBitcast to ensure we haven't changed the element size and just did something like f32->i32 or f64->i64.
-Remove an unnecessary check that Op1's type is floating point after the peekThroughBitcast. We're just going to look for a bit pattern from a constant. We don't care about its type.
-Add VT checks on several places that consume the return value of isFNEG. Due to the peekThroughBitcasts inside, the type of the return value isn't guaranteed. So its not safe to use it to build other nodes without ensuring the type matches the type being used to build the node. We might be able to replace these checks with bitcasts instead, but I don't have a test case so a bail out check seemed better for now.
Differential Revision: https://reviews.llvm.org/D63683
llvm-svn: 364206
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
Ideally we'd be able to represent this truncate as a any_extend to
v16i32 and a truncate, but SelectionDAG doens't know how to not
fold those together.
We have isel patterns to use a vpmovzxwd+vpdmovdb for the truncate,
but we aren't able to simultaneously fold the load and the store
from the isel pattern. By pulling the truncate into the store we
can successfully hide it from the DAG combiner. Then we can isel
pattern match the truncstore and load+any_extend separately.
llvm-svn: 364163
Rename masked_load/masked_store to masked_ld/masked_st to discourage
their direct use. We need to check truncating/extending and
compressing/expanding before using them. This revealed that
our scalar masked load/store patterns were misusing these.
With those out of the way, renamed masked_load_unaligned and
masked_store_unaligned to remove the "_unaligned". We didn't
check the alignment anyway so the name was somewhat misleading.
Make the aligned versions inherit from masked_load/store instead
from a separate identical version. Merge the 3 different alignments
PatFrags into a single version that uses the VT from the SDNode to
determine the size that the alignment needs to match.
llvm-svn: 364150
128/256 bit scalar_to_vectors are canonicalized to (insert_subvector undef, (scalar_to_vector), 0). We have isel patterns that try to match this pattern being used by a vzmovl to use a 128-bit instruction and a subreg_to_reg.
This patch detects the insert_subvector undef portion of this and pulls it through the vzmovl, creating a narrower vzmovl and an insert_subvector allzeroes. We can then match the insertsubvector into a subreg_to_reg operation by itself. Then we can fall back on existing (vzmovl (scalar_to_vector)) patterns.
Note, while the scalar_to_vector case is the motivating case I didn't restrict to just that case. I'm also wondering about shrinking any 256/512 vzmovl to an extract_subvector+vzmovl+insert_subvector(allzeros) but I fear that would have bad implications to shuffle combining.
I also think there is more canonicalization we can do with vzmovl with loads or scalar_to_vector with loads to create vzload.
Differential Revision: https://reviews.llvm.org/D63512
llvm-svn: 364095
This should be unreachable, but bugs can make it reachable. This
adds a debug print so we can see the bad node in the output when
the llvm_unreachable triggers.
llvm-svn: 364091
We already use vmovq for v2i64/v2f64 vzmovl. But we were using a
blendpd+xorpd for v4i64/v4f64/v8i64/v8f64 under opt speed. Or
movsd+xorpd under optsize.
I think the blend with 0 or movss/d is only needed for
vXi32 where we don't have an instruction that can move 32
bits from one xmm to another while zeroing upper bits.
movq is no worse than blendpd on any known CPUs.
llvm-svn: 364079
The sat add/sub tests still have unnecessary extract_subvector((vandnps ymm, ymm), 0) uses that should be split to (vandnps (extract_subvector(ymm, 0), extract_subvector(ymm, 0)), but its getting better.
llvm-svn: 364038
Summary:
BLSI sets the C flag is the input is not zero. So if its followed
by a TEST of the input where only the Z flag is consumed, we can
replace it with the opposite check of the C flag.
We should be able to do the same for BLSMSK and BLSR, but the
naive test case for those is being optimized to a subo by
CodeGenPrepare.
Reviewers: spatel, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63589
llvm-svn: 363957
The caller of this is looking for comparisons of the input
to these instructions with 0. But the memory instructions
input is an addess not a value input in a register.
llvm-svn: 363907
This is an exception to the rule that we should prefer xmm ops to ymm ops.
As shown in PR42305:
https://bugs.llvm.org/show_bug.cgi?id=42305
...the store folding opportunity with vextractf128 may result in better
perf by reducing the instruction count.
Differential Revision: https://reviews.llvm.org/D63517
llvm-svn: 363853
We already do this for ZERO_EXTEND/ZERO_EXTEND_VECTOR_INREG - this just extends the pattern matcher to recognize cases where we don't need the zeros in the extension.
llvm-svn: 363841
Summary:
llvm.x86.sse.stmxcsr only writes to memory.
llvm.x86.sse.ldmxcsr only reads from memory, and might generate an FPE.
Reviewers: craig.topper, RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62896
llvm-svn: 363773
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
FP_ROUND defaults to Legal for all MVT types and nothing changes
the v4f32 entry way from this default. If we needed this line
we'd also need one for v8f32 with AVX512 which we don't have.
llvm-svn: 363719
Part of fixing the X86 regression noted in D63281 - I've split this into X86 and generic parts - the generic commit will be coming shortly and will fix the vector-reduce-mul-widen.ll regression introduced here.
llvm-svn: 363693
First step toward addressing the vector-reduce-mul-widen.ll regression in D63281 - we should replace ANY_EXTEND/ANY_EXTEND_VECTOR_INREG in X86ISelDAGToDAG to avoid having to add duplicate patterns when treating any extensions as legal.
In future patches this will also allow us to keep any extension nodes around a lot longer in the DAG, which should mean that we can keep better track of undef elements that otherwise become zeros that we think we have to keep......
Differential Revision: https://reviews.llvm.org/D63326
llvm-svn: 363655
The isel patterns for these use a bitcast and load/store, but
DAG combine should have canonicalized those away.
For the purposes of the memory folding table these opcodes can be
replaced by the MOVSSrm_alt/MOVSDrm_alt and MOVSSmr/MOVSDmr opcodes.
llvm-svn: 363644
Rename the old versions that use FR32/FR64 to MOVSSrm_alt/MOVSDrm_alt.
Use the new versions in patterns that previously used a COPY_TO_REGCLASS
to VR128. These patterns expect the upper bits to be zero. The
current set up appears to work, but I'm not sure we should be
enforcing upper bits being zero through a COPY_TO_REGCLASS.
I wanted to flip the arrangement and use a COPY_TO_REGCLASS to
FR32/FR64 for the patterns that need an f32/f64 result, but that
complicated fastisel and globalisel.
I've been doing some experiments with reducing some isel patterns
and ended up in a situation where I had a
(SUBREG_TO_REG (COPY_TO_RECLASS (VMOVSSrm), VR128)) and our
post-isel peephole was unable to avoid using an instruction for
the SUBREG_TO_REG due to the COPY_TO_REGCLASS. Having a VR128
instruction removes the COPY_TO_REGCLASS that was breaking this.
llvm-svn: 363643
We don't know if its safe to unfold if we're in 32-bit mode.
This is simlar to what was done to some load opcodes in r363523.
I think its pretty unlikely we will try to unfold these anyway so
I don't think this is testable.
llvm-svn: 363595
If a XMM non-temporal store has less than natural alignment, scalarize the vector - with SSE4A we can stay on the vector and use MOVNTSD(f64), else we must move to GPRs and use MOVNTI(i32/i64).
llvm-svn: 363592
If a YMM/ZMM non-temporal store has less than natural alignment, split the vector - either they will be satisfactorily aligned or will continue to be split until they are XMMs - at which point the legalizer will scalarize it.
llvm-svn: 363582
When considering a loop containing nontemporal stores or loads for
vectorization, suppress the vectorization if the corresponding
vectorized store or load with the aligment of the original scaler
memory op is not supported with the nontemporal hint on the target.
This adds two new functions:
bool isLegalNTStore(Type *DataType, unsigned Alignment) const;
bool isLegalNTLoad(Type *DataType, unsigned Alignment) const;
to TTI, leaving the target independent default implementation as
returning true, but with overriding implementations for X86 that
check the legality based on available Subtarget features.
This fixes https://llvm.org/PR40759
Differential Revision: https://reviews.llvm.org/D61764
llvm-svn: 363581
This is currently only used for ymm->xmm splitting but we shouldn't hardcode the offsets/alignment.
This is necessary for an upcoming patch to split under-aligned non-temporal vector loads.
llvm-svn: 363570
For loads, pre-SSE41 we can't perform NT loads at all, and after that we can only perform vector aligned loads, so if the alignment is less than for a xmm we'll just end up using the regular unaligned vector loads anyway.
First step towards fixing PR42026 - the next step for stores will be to use SSE4A movntsd where possible and to avoid the stack spill on SSE2 targets.
Differential Revision: https://reviews.llvm.org/D63246
llvm-svn: 363564
It would not be safe to unfold the memory form the register form
without checking that we are compiling for 64-bit mode.
This probaby isn't a real functional issue since we are unlikely
to unfold any of these instructions since they don't have any
tied registers, aren't commutable, and don't have any inputs
other than the address.
llvm-svn: 363523
This is similar logic/motivation to the select splitting in D62969.
In D63233, the pattern changes so that we no longer have an extract_subvector of vselect,
but the operands of the select are still being concatenated.
The closest case is represented in either the first or last test diffs here - we have an
extra instruction, but we converted 3-4 ymm instructions into 4-5 xmm instructions.
I think that's the right trade-off for most AVX1 targets.
In the example based on PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
...this makes the loop about 30% faster (tested on Haswell by compiling with -mavx).
Differential Revision: https://reviews.llvm.org/D63364
llvm-svn: 363508
I recently discovered a bug on the x86 platform: The fp80 type was not handled well by x86 for constrained floating point nodes, as their regular counterparts are replaced by extending loads and truncating stores during the preprocess phase. Normally, platforms don't have this issue, as they don't typically attempt to perform such legalizations during instruction selection preprocessing. Before this change, strict_fp nodes survived until they were mutated to normal nodes, which happened shortly after preprocessing on other platforms. This modification lowers these nodes at the same phase while properly utilizing the chain.5
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Craig Topper, Kevin P. Neal
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D63271
llvm-svn: 363417
Merging the two bits shrinks the context table from 16384 bytes to 8192 bytes.
Remove the ATTRIBUTE_BITS macro and just create an enum directly. Then fix the ATTR_max define to be 8192 to reflect the table size so we stop hardcoding it separately.
llvm-svn: 363330
Previously it copied over MachineMemOperands verbatim which caused MOV32rm to have store flags set, and MOV32mr to have load flags set. This fixes some assertions being thrown with EXPENSIVE_CHECKS on.
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D62726
llvm-svn: 363268
Summary:
- Remove redundant initializations from pass constructors that were
already being initialized by LLVMInitializeX86Target().
- Add initialization function for the FPS pass.
Reviewers: craig.topper
Reviewed By: craig.topper
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63218
llvm-svn: 363221
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
The non-masked versions are already in there. I'm having some
trouble coming up with a way to test this right now. Most load
folding should happen during isel so I'm not sure how to get
peephole pass to do it.
llvm-svn: 363125
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
Summary:
Our default behavior is to use sign_extend for signed comparisons and zero_extend for everything else. But for equality we have the freedom to use either extension. If we can prove the input has been truncated from something with enough sign bits, we can use sign_extend instead and let DAG combine optimize it out. A similar rule is used by type legalization in LegalizeIntegerTypes.
This gets rid of the movzx in PR42189. The immediate will still take 4 bytes instead of the 2 bytes plus 0x66 prefix a cmp di, 32767 would get, but it avoids a length changing prefix.
Reviewers: RKSimon, spatel, xbolva00
Reviewed By: xbolva00
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63032
llvm-svn: 362920
Summary:
We can only use the memory form of cvtss2sd under optsize due to a partial register update. So previously we were emitting 2 instructions for extload when optimizing for speed. Also due to a late optimization in preprocessiseldag we had to handle (fpextend (loadf32)) under optsize.
This patch forces extload to expand so that it will always be in the (fpextend (loadf32)) form during isel. And when optimizing for speed we can just let each of those pieces select an instruction independently.
Reviewers: spatel, RKSimon
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62710
llvm-svn: 362919
Previously we did the equivalent operation in isel patterns with
COPY_TO_REGCLASS operations to transition. By inserting
scalar_to_vetors and extract_vector_elts before isel we can
allow each piece to be selected individually and accomplish the
same final result.
I ideally we'd use vector operations earlier in lowering/combine,
but that looks to be more difficult.
The scalar-fp-to-i64.ll changes are because we have a pattern for
using movlpd for store+extract_vector_elt. While an f64 store
uses movsd. The encoding sizes are the same.
llvm-svn: 362914
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
This is a potentially large perf win for AVX1 targets because of the way we
auto-vectorize to 256-bit but then expect the backend to legalize/optimize
for the half-implemented AVX1 ISA.
On the motivating example from PR37428 (even though this patch doesn't solve
the vector shift issue):
https://bugs.llvm.org/show_bug.cgi?id=37428
...there's a 16% speedup when compiling with "-mavx" (perf tested on Haswell)
because we eliminate the remaining 256-bit vblendv ops.
I added comments on a couple of tests that require further work. If we have
256-bit logic ops separating the vselect and extract, we should probably narrow
everything to 128-bit, but that requires a larger pattern match.
Differential Revision: https://reviews.llvm.org/D62969
llvm-svn: 362797
This primarily affects add/fadd/mul/fmul/and/or/xor/pmuludq/pmuldq/max/min/fmaxc/fminc/pmaddwd/pavg.
We already commuted the unmasked and zero masked versions.
I've added 512-bit stack folding tests for most of the instructions
affected. I've tested needing commuting and not commuting across
unmasked, merged masked, and zero masked. The 128/256 bit instructions
should behave similarly.
llvm-svn: 362746
This is intended to enable the use of an immediate blend or
more optimal instruction. But if the passthru is zero we don't
need any additional instructions.
llvm-svn: 362675
One of the sources controls the pass through value for the upper bits
of the result so we can't really commute it.
In practice this problem isn't a functional issue because we would
only try to commute this instruction in order to fold a load. But
we can't do embedded rounding and fold a load at the same time. So
the load fold would never succeed so I don't think we would ever
commute or at least keep the version after commuting.
llvm-svn: 362647
As far as I know these should be freely reassociatable just like
the floating point MAXC/MINC instructions.
The *reduce* test changes are largely regressions and caused by
the "generic" CPU we default to not having a scheduler model.
The machine-combiner-int-vec.ll test shows the positive benefits
of this change.
Differential Revision: https://reviews.llvm.org/D62787
llvm-svn: 362629
As suggested in D62498 - collectConcatOps() matches both
concat_vectors and insert_subvector patterns, and we see
more test improvements by using the more general match.
llvm-svn: 362620
We already handle the case where we combine shuffle(extractsubvector(x),extractsubvector(x)), this relaxes the requirement to permit different sources as long as they have the same value type.
This causes a couple of cases where the VPERMV3 binary shuffles occur at a wider width than before, which I intend to improve in future commits - but as only the subvector's mask indices are defined, these will broadcast so we don't see any increase in constant size.
llvm-svn: 362599
-Use early returns to reduce indentation
-Replace multipe ifs with a switch.
-Replace an assert with an llvm_unreachable default in the switch.
-Check that the FP type we're going to use for the
X86ISD::FAND/FOR/FXOR is legal rather than checking that the
integer type matches the width of a legal scalar fp type. This all
runs after legalization so it shouldn't really matter, but making
sure we're using a valid type in the X86ISD node is really
whats important.
llvm-svn: 362565
We already need to have patterns for X86ISD::RNDSCALE to support software intrinsics. But we currently have 5 sets of patterns for the 5 rounding operations. For of these 6 patterns we have to support 3 vectors widths, 2 element sizes, sse/vex/evex encodings, load folding, and broadcast load folding. This results in a fair amount of bytes in the isel table.
This patch adds code to PreProcessIselDAG to morph the fceil/ffloor/ftrunc/fnearbyint/frint to X86ISD::RNDSCALE. This way we can remove everything, but the intrinsic pattern while still allowing the operations to be considered Legal for DAGCombine and Legalization. This shrinks the DAGISel by somewhere between 9K and 10K.
There is one complication to this, the STRICT versions of these nodes are currently mutated to their none strict equivalents at isel time when the node is visited. This won't be true in the future since that loses the chain ordering information. For now I've also added support for the non-STRICT nodes to Select so we can change the STRICT versions there after they've been mutated to their non-STRICT versions. We'll probably need a STRICT version of RNDSCALE or something to handle this in the future. Which will take us back to needing 2 sets of patterns for strict and non-strict, but that's still better than the 11 or 12 sets of patterns we'd need.
We can probably do something similar for scalar, but I haven't looked at it yet.
Differential Revision: https://reviews.llvm.org/D62757
llvm-svn: 362535
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is a reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 362524
The proposal in D62498 showed that x86 would benefit from vector
store splitting, but that may conflict with the generic DAG
combiner's store merging transforms.
Add memory type to the existing TLI hook that enables the merging
transforms, so we can limit those changes to scalars only for x86.
llvm-svn: 362507
As discussed on D62777 - we should be able to use this in more SSE41+ cases as well but that requires us to separate it from the OR(AND(),ANDN()) matcher.
llvm-svn: 362504
r362199 fixed it for zero masking, but not zero masking. The load
folding in the peephole pass hid the bug. This patch turns off
the peephole pass on the relevant test to ensure coverage.
llvm-svn: 362440
Move this combine from x86 into generic DAGCombine, which currently only manages cases where the bitcast is between types of the same scalarsize.
Differential Revision: https://reviews.llvm.org/D59188
llvm-svn: 362324
These patterns can incorrectly narrow a volatile load from 128-bits to 64-bits.
Similar to PR42079.
Switch to using (v4i32 (bitcast (v2i64 (scalar_to_vector (loadi64))))) as the
load pattern used in the instructions.
This probably still has issues in 32-bit mode where loadi64 isn't legal. Maybe
we should use VZMOVL for widened loads even when we don't need the upper bits
as zeroes?
llvm-svn: 362203
DAG combine will usually fold fpextend+load to an fp extload anyway. So the
256 and 512 patterns were probably unnecessary. The 128 bit pattern was special
in that it looked for a v4f32 load, but then used it in an instruction that
only loads 64-bits. This is bad if the load happens to be volatile. We could
probably make the patterns volatile aware, but that's more work for something
that's probably rare. The peephole pass might kick in and save us anyway. We
might also be able to fix this with some additional DAG combines.
This also adds patterns for vselect+extload to enabled masked vcvtps2pd to be
used. Previously we looked for the unlikely vselect+fpextend+load.
llvm-svn: 362199
This makes the 5 address operands come first. And the data operand comes last.
This matches the operand order the instruction is created with. It's also the
expected order in X86MCInstLower. So everything appeared to work, but the
operands didn't match their declared type.
Fixes a -verify-machineinstrs failure.
Also remove the isel patterns from these instructions since they should only
be used for stack spills and reloads. I'm not even sure what types the patterns
were looking for to match.
llvm-svn: 362193
The result types aren't mentioned in the pattern name so really shouldn't be in the PatFrags.
The users of these either have their own type constraint or rely on the type constranit system to realize the only legal extend would be to f64.
llvm-svn: 362175
The LoadExt table defaults to all combinations being Legal. For
vector types, only src VTs with an i1 element type were ever changed.
So we don't need to mark them legal manually.
llvm-svn: 362170
We already have good codegen for (vXiY *ext(vXi1 bitcast(iX))) cases, this patch uses it for loads of vXi1 types as well - changing the load into a iX integer load, and bitcasting so that combineToExtendBoolVectorInReg can then use it.
Differential Revision: https://reviews.llvm.org/D62449
llvm-svn: 362081
avoid static check fail
RegClassOrBank is an object of RegClassOrRegBank, which is defined as
using llvm::RegClassOrRegBank = typedef PointerUnion<const
TargetRegisterClass *, const RegisterBank *>
so control flow can not get here. Use ""llvm_unreachable" here to avoid
"null pointer" confusion.
Patch by Shengchen Kan (skan)
Differential Revision: https://reviews.llvm.org/D62006
Signed-off-by: pengfei <pengfei.wang@intel.com>
llvm-svn: 361912
D18885 emitted 5 bytes for call *foo@tlsdesc(%rax). It should use the
2-byte form instead and let R_X86_64_TLSDESC_CALL apply to the beginning
of the call instruction.
The 2-byte form was deliberately chosen to make ->LE and ->IE relaxation work:
0: 48 8d 05 00 00 00 00 lea 0x0(%rip),%rax # 7 <.text+0x7>
3: R_X86_64_GOTPC32_TLSDESC a-0x4
7: ff 10 callq *(%rax)
7: R_X86_64_TLSDESC_CALL a
=>
0: 48 c7 c0 fc ff ff ff mov $0xfffffffffffffffc,%rax
7: 66 90 xchg %ax,%ax
Also change the symbol type to STT_TLS when VK_TLSCALL or VK_TLSDESC is
seen.
Reviewed By: compnerd
Differential Revision: https://reviews.llvm.org/D62512
llvm-svn: 361910
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
If we don't have VLX then 256-bit SET0 should be lowered
to VPXOR with ZMM registers. This restores functionality
accidentally removed by r309926.
Differential Revision: https://reviews.llvm.org/D62415
llvm-svn: 361843
This shows up as a side issue to the main problem for the AVX target example from PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428 - https://godbolt.org/z/7tpRa3
But as we can see in the pile of existing test diffs, it's actually a widespread problem
that affects any AVX or later target. Apart from a couple of oddballs, I think these are
all improvements for the reasons stated in the code comment: we do not want to enable YMM
unnecessarily (avoid vzeroupper and frequency throttling) and some cores split 256-bit
stores anyway.
We could say that MergeConsecutiveStores() is going overboard on some of these examples,
but that won't solve the problem completely. But that is the reason I'm proposing this as
a lowering rather than a combine: we will infinite loop fighting the merge code if we try
this earlier.
Differential Revision: https://reviews.llvm.org/D62498
llvm-svn: 361822
Forking this out of the discussion in D62498
(and assuming that will be committed later, so adding the helper function here).
The LangRef says:
"the backend should never split or merge target-legal volatile load/store instructions."
Differential Revision: https://reviews.llvm.org/D62506
llvm-svn: 361815
We were only testing for direct SETCC results - this allows us to peek through AND/OR/XOR combinations of the comparison results as well.
There's a missing SEXT(PACKSS) fold that I need to investigate for v8i1 cases before I can enable it there as well.
llvm-svn: 361716
If we have a known non-nan operand, place it in the second operand
of fmin/fmax that is returned if either operand is nan.
Differential Revision: https://reviews.llvm.org/D62448
llvm-svn: 361704
INC/DEC is really a special case of a more generic issue. We should also turn leas into add reg/reg or add reg/imm regardless of the slow lea flags.
This also supports LEA64_32 which has 64 bit input registers and 32 bit output registers. So we need to convert the 64 bit inputs to their 32 bit equivalents to check if they are equal to base reg.
One thing to note, the original code preserved the kill flags by adding operands to the new instruction instead of using addReg. But I think tied operands aren't supposed to have the kill flag set. I dropped the kill flags, but I could probably try to preserve it in the add reg/reg case if we think its important. Not sure which operand its supposed to go on for the LEA64_32r instruction due to the super reg implicit uses. Though I'm also not sure those are needed since they were probably just created by an INSERT_SUBREG from a 32-bit input.
Differential Revision: https://reviews.llvm.org/D61472
llvm-svn: 361691
This copies the Sandy Bridge zero idiom support to later CPUs. Adding the AVX2 and AVX512F/VL instructions as appropriate.
Differential Revision: https://reviews.llvm.org/D62360
llvm-svn: 361690
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 361527
In general dynamic/local dynamic TLS models, with -fno-plt,
* x86: emit `calll *___tls_get_addr@GOT(%ebx)` instead of `calll ___tls_get_addr@PLT`
Note, on x86, if we can get rid of %ebx as the PIC register,
it may be better to use a register not preserved across function calls.
* x86_64: emit `callq *__tls_get_addr@GOTPCREL(%rip)` instead of `callq __tls_get_addr@PLT`
Reorganize the code by separating 32-bit and 64-bit.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62106
llvm-svn: 361453
We effectively had a second set of isel patterns that tried to use a
regular store instruction and an extract_subreg instruction. Or a masked move
and an extract_subreg. These patterns were intended to override the
matching of VEXTRACT instructions by taking advantage of the priority
of the explicit immediate 0 for the index.
This patch instaed just disables the immediate 0 matchin the VEXTRACT
patterns. This each of the component pieces of the larger patterns will
match by themselves.
This found a bug of sorts were we didn't use 128-bit store for 512->128
extract on KNL. Its unclear what the right thing here should be.
Using the vextract avoids constraining the register allocator to use
xmm0-15. But it always results in a longer encoding if the register
allocator ends up choosing xmm0-15 anyway.
llvm-svn: 361431
We were turning roundss/sd/ps/pd intrinsics with immediates of 1 or 2 into
llvm.floor/ceil. The llvm.ceil/floor intrinsics are supposed to correspond
to the libm functions. For the libm functions we need to disable the
precision exception so the llvm.floor/ceil functions should always map to
encodings 0x9 and 0xA.
We had a mix of isel patterns where some used 0x9 and 0xA and others used
0x1 and 0x2. We need to be consistent and always use 0x9 and 0xA.
Since we have no way in isel of knowing where the llvm.ceil/floor came
from, we can't map X86 specific intrinsics with encodings 1 or 2 to it.
We could map 0x9 and 0xA to llvm.ceil/floor instead, but I'd really like
to see a use case and optimization advantage first.
I've left the backend test cases to show the blend we now emit without
the extra isel patterns. But I've removed the InstCombine tests completely.
llvm-svn: 361425
When the tiny code model is requested for a target machine that does not
support this, we get an error message (which is nice) but also this diagnostic
and request to submit a bug report:
fatal error: error in backend: Target does not support the tiny CodeModel
[Inferior 2 (process 31509) exited with code 0106]
clang-9: error: clang frontend command failed with exit code 70 (use -v to see invocation)
(gdb) clang version 9.0.0 (http://llvm.org/git/clang.git 29994b0c63a40f9c97c664170244a7bba5ecc15e) (http://llvm.org/git/llvm.git 95606fdf91c2d63a931e865f4b78b2e9828ddc74)
Target: arm-arm-none-eabi
Thread model: posix
clang-9: note: diagnostic msg: PLEASE submit a bug report to https://bugs.llvm.org/ and include the crash backtrace, preprocessed source, and associated run script.
clang-9: note: diagnostic msg:
********************
PLEASE ATTACH THE FOLLOWING FILES TO THE BUG REPORT:
Preprocessed source(s) and associated run script(s) are located at:
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.c
clang-9: note: diagnostic msg: /tmp/tiny-dfe1a2.sh
clang-9: note: diagnostic msg:
But this is not a bug, this is a feature. :-) Not only is this not a bug, this
is also pretty confusing. This patch causes just to print the fatal error and
not the diagnostic:
fatal error: error in backend: Target does not support the tiny CodeModel
Differential Revision: https://reviews.llvm.org/D62236
llvm-svn: 361370
Fix for https://bugs.llvm.org/show_bug.cgi?id=41971. Make the
combineVectorSizedSetCCEquality() transform more conservative by
checking that the bitcast to the vector type will be cheap/free
for both operands. I'm considering it cheap if it's a constant,
a load or already a vector. I've dropped the explicit check for
f128 because it should fall out naturally (in the cases where
it'd be detrimental).
Differential Revision: https://reviews.llvm.org/D62220
llvm-svn: 361352
CET-IBT enabled
Return-twice functions will indirectly jump after the caller's position.
So when CET-IBT is enable, we should make sure these is endbr*
instructions follow these Return-twice function caller. Like GCC does.
Patch by Xiang Zhang (xiangzhangllvm)
Differential Revision: https://reviews.llvm.org/D61881
llvm-svn: 361342
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
Same as what we do for vector reductions in combineHorizontalPredicateResult, use movmsk+cmp for scalar (and(extract(x,0),extract(x,1)) reduction patterns.
llvm-svn: 361052
This can be used to create references among sections. When --gc-sections
is used, the referenced section will be retained if the origin section
is retained.
See R_MIPS_NONE (D13659), R_ARM_NONE (D61992), R_AARCH64_NONE (D61973) for similar changes.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D62014
llvm-svn: 360983
These are valid Jcc, but aren't based on the EFLAGS condition codes (Intel 64
and IA-32 Architetcures Software Developer's Manual Vol. 1, Appendix B). These
are covered in clang/test, but not llvm/test.
llvm-svn: 360960
In Intel syntax, it's not uncommon to see a "short" modifier on Jcc conditional
jumps, which indicates the offset should be a "short jump" (8-bit immediate
offset from EIP, -128 to +127). This patch expands to all recognized Jcc
condition codes, and removes the inline restriction.
Clang already ignores "jmp short" in inline assembly. However, only "jmp" and a
couple of Jcc are actually checked, and only inline (i.e., not when using the
integrated assembler for asm sources). A quick search through asm-containing
libraries at hand shows a pretty broad range of Jcc conditions spelled with
"short."
GAS ignores the "short" modifier, and instead uses an encoding based on the
given immediate. MS inline seems to do the same, and I suspect MASM does, too.
NASM will yield an error if presented with an out-of-range immediate value.
Example of GCC 9.1 and MSVC v19.20, "jmp short" with offsets that do and do not
fit within 8 bits: https://gcc.godbolt.org/z/aFZmjY
Differential Revision: https://reviews.llvm.org/D61990
llvm-svn: 360954
This better matches the verbiage in Intel documentation, and should help avoid
confusion between these two different kinds of values, both of which are parsed
from mnemonics.
llvm-svn: 360953
Summary:
This refactors four pieces of code that create SDNodes for references to
symbols:
- normal global address lowering (LEA, MOV, etc)
- callee global address lowering (CALL)
- external symbol address lowering (LEA, MOV, etc)
- external symbol address lowering (CALL)
Each of these pieces of code need to:
- classify the reference
- lower the symbol
- emit a RIP wrapper if needed
- emit a load if needed
- add offsets if needed
I think handling them all in one place will make the code easier to
maintain in the future.
Reviewers: craig.topper, RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61690
llvm-svn: 360952
This suppresses exceptions which is what we should be doing for ceil and floor. We already use the correct immediate
in patterns without masking.
llvm-svn: 360915
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
If we're trying to match an LEA, its possible the LEA match will be deemed unprofitable. In which case the negation we created in matchAddress would be left dangling in the SelectionDAG. This could artificially increase use counts for other nodes in the DAG. Though I don't have an example of that. But it just seems like bad form to have dangling nodes in isel.
Differential Revision: https://reviews.llvm.org/D61047
llvm-svn: 360823
These particular instructions only operate on 128-bit vectors and have no wider equivalents. And the
element size is always known.
One could argue that MOVSS/MOVSD could be merged, but that's probably disruptive to code in
X86ISelLowering and probably low value.
llvm-svn: 360815
They encode the same way, but OR32mi8Locked sets hasUnmodeledSideEffects set
which should be stronger than the mayLoad/mayStore on LOCK_OR32mi8. I think
this makes sense since we are using it as a fence.
This also seems to hide the operation from the speculative load hardening pass
so I've reverted r360511.
llvm-svn: 360747
Move the declarations of getThe<Name>Target() functions into a new header in
TargetInfo and make users of these functions include this new header.
This fixes a layering problem.
llvm-svn: 360736
This was the portion split off D58632 so that it could follow the redzone API cleanup. Note that I changed the offset preferred from -8 to -64. The difference should be very minor, but I thought it might help address one concern which had been previously raised.
Differential Revision: https://reviews.llvm.org/D61862
llvm-svn: 360719
D61068 handled vector shifts, this patch does the same for scalars where there are similar number of pipes for shifts as bit ops - this is true almost entirely for AMD targets where the scalar ALUs are well balanced.
This combine avoids AND immediate mask which usually means we reduce encoding size.
Some tests show use of (slow, scaled) LEA instead of SHL in some cases, but thats due to particular shift immediates - shift+mask generate these just as easily.
Differential Revision: https://reviews.llvm.org/D61830
llvm-svn: 360684
This is a follow on to D58632, with the same logic. Given a memory operation which needs ordering, but doesn't need to modify any particular address, prefer to use a locked stack op over an mfence.
Differential Revision: https://reviews.llvm.org/D61863
llvm-svn: 360649
Returning SDValue() makes the caller think that nothing happened and it will
end up executing the Expand path. This generates extra nodes that will need to
be pruned as dead code.
Returning an ISD::MERGE_VALUES will tell the caller that we'd like to make a
change and it will take care of replacing uses. This will prevent falling into
the Expand path.
llvm-svn: 360627
These are updates to match how isel table would emit a LOCK_OR32mi8 node.
-Use i32 for the immediate zero even though only 8 bits are encoded.
-Use i16 for segment register.
-Use LOCK_OR32mi8 for idempotent atomic operations in 32-bit mode to match
64-bit mode. I'm not sure why OR32mi8Locked and LOCK_OR32mi8 both exist. The
only difference seems to be that OR32mi8Locked is marked as UnmodeledSideEffects=1.
-Emit an extra i32 result for the flags output.
I don't know if the types here really matter just noticed it was inconsistent
with normal behavior.
llvm-svn: 360619
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
Fixes the regression noted in D61782 where a VZEXT_MOVL was being inserted because we weren't discriminating between 'zeroable' and 'all undef' for the upper elts.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360596
Now that we can use HADD/SUB for scalar additions from any pair of extracted elements (D61263), we can relax the one use limit as we will be able to merge multiple uses into using the same HADD/SUB op.
This exposes a couple of missed opportunities in LowerBuildVectorv4x32 which will be committed separately.
Differential Revision: https://reviews.llvm.org/D61782
llvm-svn: 360594
I've included a new fix in X86RegisterInfo to prevent PR41619 without
reintroducing r359392. We might be able to improve that in the base class
implementation of shouldRewriteCopySrc somehow. But this hopefully enables
forward progress on SimplifyDemandedBits improvements for now.
Original commit message:
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGComb
but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
llvm-svn: 360552
See if we can simplify the demanded vector elts from the extraction before trying to simplify the demanded bits.
This helps us with target shuffles and hops in particular.
llvm-svn: 360535
The original costs stopped at SSE42, I've added conservative estimates for everything down to SSE1/SSE2 and moved some of the SSE42 costs to SSE41 (really only the addition of PCMPGT makes any difference).
I've also added missing vXi8 costs (we use PHMINPOSUW for i8/i16 for scarily quick results) and 256-bit vector costs for AVX1.
llvm-svn: 360528
For some targets, there is a circular dependency between InstPrinter and
MCTargetDesc. Merging them together will fix this. For the other targets,
the merging is to maintain consistency so all targets will have the same
structure.
llvm-svn: 360484
As requested in D58632, cleanup our red zone detection logic in the X86 backend. The existing X86MachineFunctionInfo flag is used to track whether we *use* the redzone (via a particularly optimization?), but there's no common way to check whether the function *has* a red zone.
I'd appreciate careful review of the uses being updated. I think they are NFC, but a careful eye from someone else would be appreciated.
Differential Revision: https://reviews.llvm.org/D61799
llvm-svn: 360479
After D58632, we can create idempotent atomic operations to the top of stack.
This confused speculative load hardening because it thinks accesses should have
virtual register base except for the cases it already excluded.
This commit adds a new exclusion for this case. I'll try to reduce a test case
for this, but this fix was verified to work by the reporter. This should avoid
needing to revert D58632.
llvm-svn: 360475
Summary: Skip over prefetches when assigning debug info to instructions with memory operands. This way, the debug info is stable after instrumenting a binary with prefetches, allowing for iterative profiling and instrumentation.
Reviewers: davidxl
Reviewed By: davidxl
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61789
llvm-svn: 360471
Fixes https://bugs.llvm.org/show_bug.cgi?id=40969
The functions findPotentiallyBlockedCopies and buildCopy are currently not
accounting for the presence of debug instructions. In the former this results
in the optimization not being trigerred, and in the latter results in
inconsistent codegen.
This patch enables the optimization to be performed in a debug build and
ensures the codegen is consistent with non-debug builds.
Patch by Chris Dawson.
Differential Revision: https://reviews.llvm.org/D61680
llvm-svn: 360436
If we only use the lower xmm of a ymm hop, then extract the xmm's (for free), perform the xmm hop and then insert back into a ymm (for free).
Fixes some of the regressions noted in D61782
llvm-svn: 360435
The current lowering uses an mfence. mfences are substaintially higher latency than the locked operations originally requested, but we do want to avoid contention on the original cache line. As such, use a locked instruction on a cache line assumed to be thread local.
Differential Revision: https://reviews.llvm.org/D58632
llvm-svn: 360393
As reported on PR39920, "slow horizontal ops" targets tend to internally expand to 2*shuffle+add/sub - so if we can reduce 2*shuffle+add/sub to a hadd/sub then we should do it - similar port usage but reduced instruction count.
This works out in most cases, although the "PR22377" regression in vector-shuffle-combining.ll is annoying - going from 2*shuffle+add+shuffle to hadd+2*shuffle - I've opened PR41813 to cover this.
Differential Revision: https://reviews.llvm.org/D61308
llvm-svn: 360360
I've started this cleanup more several times now, but got sidetracked
elsewhere, e.g. by llvm-exegesis problems. Not this time, finally!
This is mainly cleaning up the inverse throughput values,
and a few latencies/uops, based on the llvm-exegesis measured values.
Though this is not complete by any means,
there's certainly more cleanup to be done.
The performance numbers (i've only checked by RawSpeed benchmark) aren't
really surprising - overall this *slightly* (< -1%) improves perf.
llvm-svn: 360341
This code was never covered by tests, in PR41786 it was pointed out that
the deletion part doesn't work, and in a full Chrome build I was never
able to hit the code path that looks through copies. It seems the
situation it's supposed to handle doesn't actually come up in practice.
Delete it to simplify the code.
Differential revision: https://reviews.llvm.org/D61671
llvm-svn: 360320
Summary:
A COFF stub indirects the reference to a symbol through memory. A
.refptr.$sym global variable pointer is created to refer to $sym.
Typically mingw uses these for external global variable declarations,
but we can use them for weak function declarations as well.
Updates the dso_local classification to add a special case for
extern_weak symbols on COFF in both clang and LLVM.
Fixes PR37598
Reviewers: smeenai, mstorsjo
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61615
llvm-svn: 360207
Basic "revectorization" combine, we can probably do more opcodes here but it can be a tricky cost-benefit depending on where the subvectors came from - but this case helps shuffle combining.
llvm-svn: 360134
The FR32/FR64/VR128/VR256 register classes don't contain the upper 16 registers. For most cases we use the default implementation which will find any register class that contains the register in question if the VT is legal for the register class. But if the VT is i32 or i64, we won't find a matching register class and will instead up in the code modified in this patch.
If the requested register is x/y/zmm16-31 we weren't returning a register class that contains those registers and will hit an assertion in the caller.
To fix this, I've changed to use the extended register class instead. I don't believe we need a subtarget check to see if avx512 is enabled. The default implementation just pick whatever register class it finds first. I checked and we currently pick FR32X for XMM0 with an f32 type using the default implementation regardless of whether avx512 is enabled. So I assume its it is ok to do the same for i32.
Differential Revision: https://reviews.llvm.org/D61457
llvm-svn: 360102
We require d/q suffixes on the memory form of these instructions to disambiguate the memory size.
We don't require it on the register forms, but need to support parsing both with and without it.
Previously we always printed the d/q suffix on the register forms, but it's redundant and
inconsistent with gcc and objdump.
After this patch we should support the d/q for parsing, but not print it when its unneeded.
llvm-svn: 360085
Reverts "[X86] Remove (V)MOV64toSDrr/m and (V)MOVDI2SSrr/m. Use 128-bit result MOVD/MOVQ and COPY_TO_REGCLASS instead"
Reverts "[TargetLowering][AMDGPU][X86] Improve SimplifyDemandedBits bitcast handling"
Eric Christopher and Jorge Gorbe Moya reported some issues with these patches to me off list.
Removing the CodeGenOnly instructions has changed how fneg is handled during fast-isel with sse/sse2. We're now emitting fsub -0.0, x instead
moving to the integer domain(in a GPR), xoring the sign bit, and then moving back to xmm. This is because the fast isel table no longer
contains an entry for (f32/f64 bitcast (i32/i64)) so the target independent fneg code fails. The use of fsub changes the behavior of nan with
respect to -O2 codegen which will always use a pxor. NOTE: We still have a difference with double with -m32 since the move to GPR doesn't work
there. I'll file a separate PR for that and add test cases.
Since removing the CodeGenOnly instructions was fixing PR41619, I'm reverting r358887 which exposed that PR. Though I wouldn't be surprised
if that bug can still be hit independent of that.
This should hopefully get Google back to green. I'll work with Simon and other X86 folks to figure out how to move forward again.
llvm-svn: 360066
scan-build was reporting that CommutableOpIdx1 never used its original initialized value - move it down to where its first used to make the real initialization more obvious (and matches the comment that's there).
llvm-svn: 360028
Summary:
1. Enable infrastructure of AVX512_BF16, which is supported for BFLOAT16 in Cooper Lake;
2. Enable VCVTNE2PS2BF16, VCVTNEPS2BF16 and DPBF16PS instructions, which are Vector Neural Network Instructions supporting BFLOAT16 inputs and conversion instructions from IEEE single precision.
VCVTNE2PS2BF16: Convert Two Packed Single Data to One Packed BF16 Data.
VCVTNEPS2BF16: Convert Packed Single Data to Packed BF16 Data.
VDPBF16PS: Dot Product of BF16 Pairs Accumulated into Packed Single Precision.
For more details about BF16 isa, please refer to the latest ISE document: https://software.intel.com/en-us/download/intel-architecture-instruction-set-extensions-programming-reference
Author: LiuTianle
Reviewers: craig.topper, smaslov, LuoYuanke, wxiao3, annita.zhang, RKSimon, spatel
Reviewed By: craig.topper
Subscribers: kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60550
llvm-svn: 360017
The x/y/z suffix is needed to disambiguate the memory form in at&t syntax since no xmm/ymm/zmm register is mentioned.
But we should also allow it for the register and broadcast forms where its not needed for consistency. This matches gas.
The printing code will still only use the suffix for the memory form where it is needed.
llvm-svn: 359903
The default impementation in the base class for TargetLowering::getRegForInlineAsmConstraint doesn't work for mask registers when the VT is a scalar type integer types since the only legal mask types are vXi1. So we end up just getting whatever the first register class that contains the register. Currently this appears to be VK1, but its really dependent on the order tablegen outputs the register classes.
Some code in the caller ends up looking up the type for this register class and find v1i1 then generates a copyfromreg from the physical k-register with the v1i1 type. Then it generates an any_extend from v1i1 to the scalar VT which isn't legal. This bad any_extend sticks around until isel where it selects a MOVZX32rr8 with a v1i1 input or maybe a i8 input. Not sure but eventually we pick up a copy from VK1 to GR8 in MachineIR which isn't supported. This leads to a failure in physical register copying.
This patch uses the scalar type to find a VK class of the right size. In the attached test case this will be VK16. This causes a bitcast from vk16 to i16 to be generated instead of an any_extend. This will be properly iseled to a VK16 to GR32 copy and a GR32->GR16 extract_subreg.
Fixes PR41678
Differential Revision: https://reviews.llvm.org/D61453
llvm-svn: 359837
Limiting scalar hadd/hsub generation to the lowest xmm looks to be unnecessary - we will be extracting one upper xmm whatever, and we can remove a shuffle by using the hop which is inline with what shouldUseHorizontalOp expects to happen anyway.
Testing on btver2 (the main target for fast-hops) shows this is beneficial even for float ops where we have a 'shuffle' to extract the float result:
https://godbolt.org/z/0R-U-K
Differential Revision: https://reviews.llvm.org/D61426
llvm-svn: 359786
The broadcasting variant for instruction vfpclassp[d,s] shouldn't use suffix q/l. So remove them from the template.
Patch by Pengfei Wang
Differential Revision: https://reviews.llvm.org/D61295
llvm-svn: 359753
We already perform horizontal add/sub if we extract from elements 0 and 1, this patch extends it to non-0/1 element extraction indices (as long as they are from the lowest 128-bit vector).
Differential Revision: https://reviews.llvm.org/D61263
llvm-svn: 359707
This is an alternative to D59669 which more aggressively extracts i1 elements from vXi1 bool vectors using a MOVMSK.
Differential Revision: https://reviews.llvm.org/D61189
llvm-svn: 359666
The reordering can leave at least a dead TokenFactor in the graph. This cause the linearize scheduler to fail with something like the assert seen in PR22614. This is only one of many ways we can break the linearize scheduler today so I can't say for sure that any of the other failures in that bug were caused by this issue.
This takes the heavy hammer approach of just running RemoveDeadNodes unconditionally at the end of the PreprocessISelDAG. If this turns out to be a compile time hit, we can try to refine it.
Differential Revision: https://reviews.llvm.org/D61164
llvm-svn: 359582
This removes some of the class variables. Merge basic block processing into
runOnMachineFunction to keep the flags local.
Pass MachineBasicBlock around instead of an iterator. We can get the iterator in
the few places that need it. Allows a range-based outer for loop.
Separate the Atom optimization from the rest of the optimizations. This allows
fixupIncDec to create INC/DEC and still allow Atom to turn it back into LEA
when profitable by its heuristics.
I'd like to improve fixupIncDec to turn LEAs into ADD any time the base or index
register is equal to the destination register. This is profitable regardless of
the various slow flags. But again we would want Atom to be able to undo that.
Differential Revision: https://reviews.llvm.org/D60993
llvm-svn: 359581
Current LLVM uses pxor+pinsrb on SSE4+ for INSERT_VECTOR_ELT(ZeroVec, 0, Elt) insead of much simpler movd.
INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is idiomatic construct which is used e.g. for _mm_cvtsi32_si128(Elt) and for lowest element initialization in _mm_set_epi32.
So such inefficient lowering leads to significant performance digradations in ceratin cases switching from SSSE3 to SSE4.
https://bugs.llvm.org/show_bug.cgi?id=41512
Here INSERT_VECTOR_ELT(ZeroVec, 0, Elt) is simply converted to SCALAR_TO_VECTOR(Elt) when applicable since latter is closer match to desired behavior and always efficiently lowered to movd and alike.
Committed on behalf of @Serge_Preis (Serge Preis)
Differential Revision: https://reviews.llvm.org/D60852
llvm-svn: 359545
Craig Topper