This patch adds vecreduce_smax, vecredude_umax, vecreduce_smin, vecreduce_umin and selection for vmaxv and minv.
Differential Revision: https://reviews.llvm.org/D66413
llvm-svn: 371827
Follow-up of rL371321 that added some more FP16 FMA patterns, and an attempt to
reduce the copy-pasting and make this more readable.
Differential Revision: https://reviews.llvm.org/D67403
llvm-svn: 371818
This was added to support fp128 on x86-64, but appears to be
unneeded now. This may be because the FR128 register class
added back then was merged with the VR128 register class later.
llvm-svn: 371815
Unlike SelectionDAG, treat this as a normally legalizable operation.
In SelectionDAG this is supposed to only ever formed if it's legal,
but I've found that to be restricting. For AMDGPU this is contextually
legal depending on whether denormal flushing is allowed in the use
function.
Technically we currently treat the denormal mode as a subtarget
feature, so custom lowering could be avoided. However I consider this
to be a defect, and this should be contextually dependent on the
controllable rounding mode of the parent function.
llvm-svn: 371800
The result integer does not need to be the same width as the input.
AMDGPU, NVPTX, and Hexagon all have patterns working around the types
matching. GlobalISel defines these as being different type indexes.
llvm-svn: 371797
This testcase is invalid, and caught by the verifier. For the verifier
to catch it, the live interval computation needs to complete. Remove
the assert so the verifier catches this, which is less confusing.
In this testcase there is an undefined use of a subregister, and lanes
which aren't used or defined. An equivalent testcase with the
super-register shrunk to have no untouched lanes already hit this
verifier error.
llvm-svn: 371792
This was relying on the SGPR usable for the carry out clobber to also
be used for the input. There was no carry out on gfx9. With no carry
out clobber to worry about, so the literal can just be directly used
with a VOP2 add.
llvm-svn: 371791
Swiftself uses a callee-saved register. We can tail call when the register used
in the caller and callee is the same.
This behaviour is equivalent to that in `TargetLowering::parametersInCSRMatch`.
Update call-translator-tail-call.ll to verify that we can do this. When we
support inline assembly, we can write a check similar to the one in the
general swiftself.ll. For now, we need to verify that we get the correct COPY
instruction after call lowering.
Differential Revision: https://reviews.llvm.org/D67511
llvm-svn: 371788
This is the first sweep of generic code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time. That will come later. See D66309 for context.
Differential Revision: https://reviews.llvm.org/D66318
llvm-svn: 371786
This adds support for lowering sibling calls with outgoing arguments.
e.g
```
define void @foo(i32 %a)
```
Support is ported from AArch64ISelLowering's `isEligibleForTailCallOptimization`.
The only thing that is missing is a full port of
`TargetLowering::parametersInCSRMatch`. So, if we're using swiftself,
we'll never tail call.
- Rename `analyzeCallResult` to `analyzeArgInfo`, since the function is now used
for both outgoing and incoming arguments
- Teach `OutgoingArgHandler` about tail calls. Tail calls use frame indices for
stack arguments.
- Teach `lowerFormalArguments` to set the bytes in the caller's stack argument
area. This is used later to check if the tail call's parameters will fit on
the caller's stack.
- Add `areCalleeOutgoingArgsTailCallable` to perform the eligibility check on
the callee's outgoing arguments.
For testing:
- Update call-translator-tail-call to verify that we can now tail call with
outgoing arguments, use G_FRAME_INDEX for stack arguments, and respect the
size of the caller's stack
- Remove GISel-specific check lines from speculation-hardening.ll, since GISel
now tail calls like the other selectors
- Add a GISel test line to tailcall-string-rvo.ll since we can tail call in that
test now
- Add a GISel test line to tailcall_misched_graph.ll since we tail call there
now. Add specific check lines for GISel, since the debug output from the
machine-scheduler differs with GlobalISel. The dependency still holds, but
the output comes out in a different order.
Differential Revision: https://reviews.llvm.org/D67471
llvm-svn: 371780
Summary:
Since the SPE4RC register class contains an identical set of registers
and an identical spill size to the GPRC class its slightly confusing
the tablegen emitter. It's preventing the GPRC_and_GPRC_NOR0 synthesized
register class from inheriting VTs and AltOrders from GPRC or GPRC_NOR0.
This is because SPE4C is found first in the super register class list
when inheriting these properties and it doesn't set the VTs or
AltOrders the same way as GPRC or GPRC_NOR0.
This patch replaces all uses of GPE4RC with GPRC and allows GPRC and
GPRC_NOR0 to contain f32.
The test changes here are because the AltOrders are being inherited
to GPRC_NOR0 now.
Found while trying to determine if getCommonSubClass needs to take
a VT argument. It was originally added to support fp128 on x86-64,
I've changed some things about that so that it might be needed
anymore. But a PowerPC test crashed without it and I think its
due to this subclass issue.
Reviewers: jhibbits, nemanjai, kbarton, hfinkel
Subscribers: wuzish, nemanjai, mehdi_amini, hiraditya, kbarton, MaskRay, dexonsmith, jsji, shchenz, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67513
llvm-svn: 371779
We were failing to compute trip counts (both exact and maximum) for any loop which involved a comparison against either an umin or smin. It looks like this simply got missed when we added smin/umin to SCEV. (Note: umin was submitted separately earlier today. Turned out two folks hit this at the same time.)
Differential Revision: https://reviews.llvm.org/D67514
llvm-svn: 371776
The X86 decision assumes the compare will produce a result in an XMM
register, but that can't happen for an fp128 compare since those
go to a libcall the returns an i32. Pass the VT so X86 can check
the type.
llvm-svn: 371775
Expanding the folding of `nearbyint()`, `rint()` and `trunc()` to library
functions, in addition to the current support for intrinsics.
Differential revision: https://reviews.llvm.org/D67468
llvm-svn: 371774
This code was changed to accomodate fp128 being softened to itself
during type legalization on x86-64. This was done in order to create
libcalls while having fp128 as a legal type. We're now doing the
libcall creation during LegalizeDAG and the type legalization changes
to enable the old behavior have been removed. So this change to
SelectionDAGBuilder is no longer needed.
llvm-svn: 371771
This patch adds support for SCEVUMinExpr to getRangeRef,
similar to the support for SCEVUMaxExpr.
Reviewers: sanjoy.google, efriedma, reames, nikic
Reviewed By: sanjoy.google
Differential Revision: https://reviews.llvm.org/D67177
llvm-svn: 371768
Implement a TODO from rL371452, and handle loop invariant addresses in predicated blocks. If we can prove that the load is safe to speculate into the header, then we can avoid using a masked.load in favour of a normal load.
This is mostly about vectorization robustness. In the common case, it's generally expected that LICM/LoadStorePromotion would have eliminated such loads entirely.
Differential Revision: https://reviews.llvm.org/D67372
llvm-svn: 371745
In MVE, as of rL371218, we are attempting to sink chains of instructions such as:
%l1 = insertelement <8 x i8> undef, i8 %l0, i32 0
%broadcast.splat26 = shufflevector <8 x i8> %l1, <8 x i8> undef, <8 x i32> zeroinitializer
In certain situations though, we can end up breaking the dominance relations of
instructions. This happens when we sink the instruction into a loop, but cannot
remove the originals. The Use is updated, which might in fact be a Use from the
second instruction to the first.
This attempts to fix that by reversing the order of instruction that are sunk,
and ensuring that we update the uses on new instructions if they have already
been sunk, not the old ones.
Differential Revision: https://reviews.llvm.org/D67366
llvm-svn: 371743
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, JDevlieghere, alexshap, rupprecht, jhenderson
Subscribers: sdardis, nemanjai, hiraditya, kbarton, jakehehrlich, jrtc27, MaskRay, atanasyan, jsji, seiya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67499
llvm-svn: 371742
Folding for fma/fmuladd was added here:
rL202914
...and as seen in existing/unchanged tests, that works to propagate NaN
if it's already an input, but we should fold an fma() that creates NaN too.
From IEEE-754-2008 7.2 "Invalid Operation", there are 2 clauses that apply
to fma, so I added tests for those patterns:
c) fusedMultiplyAdd: fusedMultiplyAdd(0, ∞, c) or fusedMultiplyAdd(∞, 0, c)
unless c is a quiet NaN; if c is a quiet NaN then it is implementation
defined whether the invalid operation exception is signaled
d) addition or subtraction or fusedMultiplyAdd: magnitude subtraction of
infinities, such as: addition(+∞, −∞)
Differential Revision: https://reviews.llvm.org/D67446
llvm-svn: 371735
IRTranslator creates G_DYN_STACKALLOC instruction during expansion of
alloca when argument that tells number of elements to allocate on stack
is a virtual register. Use default lowering for MIPS32.
Differential Revision: https://reviews.llvm.org/D67440
llvm-svn: 371728
G_IMPLICIT_DEF is used for both integer and floating point implicit-def.
Handle G_IMPLICIT_DEF as ambiguous opcode in MipsRegisterBankInfo.
Select G_IMPLICIT_DEF for MIPS32.
Differential Revision: https://reviews.llvm.org/D67439
llvm-svn: 371727
This is the main CodeGen patch to support the arm64_32 watchOS ABI in LLVM.
FastISel is mostly disabled for now since it would generate incorrect code for
ILP32.
llvm-svn: 371722
Up to now, we've decided whether to sink address calculations using GEPs or
normal arithmetic based on the useAA hook, but there are other reasons GEPs
might be preferred. So this patch splits the two questions, with a default
implementation falling back to useAA.
llvm-svn: 371721
Summary:
I don't have a direct motivational case for this,
but it would be good to have this for completeness/symmetry.
This pattern is basically the motivational pattern from
https://bugs.llvm.org/show_bug.cgi?id=43251
but with different predicate that requires that the offset is non-zero.
The completeness bit comes from the fact that a similar pattern (offset != zero)
will be needed for https://bugs.llvm.org/show_bug.cgi?id=43259,
so it'd seem to be good to not overlook very similar patterns..
Proofs: https://rise4fun.com/Alive/21b
Also, there is something odd with `isKnownNonZero()`, if the non-zero
knowledge was specified as an assumption, it didn't pick it up (PR43267)
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67411
llvm-svn: 371718
Current implementation of estimating divisions loses precision since it
estimates reciprocal first and does multiplication. This patch is to re-order
arithmetic operations in the last iteration in DAGCombiner to improve the
accuracy.
Reviewed By: Sanjay Patel, Jinsong Ji
Differential Revision: https://reviews.llvm.org/D66050
llvm-svn: 371713
This was previously used to turn fp128 operations into libcalls
on X86. This is now done through op legalization after r371672.
This restores much of this code to before r254653.
llvm-svn: 371709
We have been using -switch-inst-prof-update-wrapper-strict
set to true by default for some time. It is time to remove
the safety stuff and make SwitchInstProfUpdateWrapper
intolerant to inconsistencies in !prof branch_weights
metadata of SwitchInst.
This patch gets rid of the Invalid state of
SwitchInstProfUpdateWrapper and the option
-switch-inst-prof-update-wrapper-strict. So there is only
two states: changed and unchanged.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D67435
llvm-svn: 371707
AVX512 instructions can cause a frequency drop on these CPUs. This
can negate the performance gains from using wider vectors. Enabling
prefer-vector-width=256 will prevent generation of zmm registers
unless explicit 512 bit operations are used in the original source
code.
I believe gcc and icc both do something similar to this by default.
Differential Revision: https://reviews.llvm.org/D67259
llvm-svn: 371694
First we were asserting that the ValNo of a VA was the wrong value. It doesn't actually
make a difference for us in CallLowering but fix that anyway to silence the assert.
The bigger issue was that after fixing the assert we were generating invalid MIR
because the merging/unmerging of values split across multiple registers wasn't
also implemented for memory locs. This happens when we run out of registers and
have to pass the split types like i128 -> i64 x 2 on the stack. This is do-able, but
for now just fall back.
llvm-svn: 371693
Before, we only checked the callee for swifterror. However, we should also be
checking the caller to see if it has a swifterror parameter.
Since we don't currently handle outgoing arguments, this didn't show up in the
swifterror.ll testcase.
Also, remove the swifterror checks from call-translator-tail-call.ll, since
they are covered by the existing swifterror testing. Better to have it all in
one place.
Differential Revision: https://reviews.llvm.org/D67465
llvm-svn: 371692
Doing the CRLF translation while writing the file defeats our
optimization to not update the file if it hasn't changed.
Fixes PR43271.
llvm-svn: 371683
I found three issues:
1. the loop over E[ABCD]X copies run over BB start
2. the direct address of cmpxchg8b could be a frame index
3. the displacement of cmpxchg8b could be a global instead of an
immediate
These were all introduced together in r287875, and should be fixed with
this change.
Issue reported by Zachary Turner.
llvm-svn: 371678
When possible, replace calls to library routines on the host with equivalent
ones in LLVM.
Differential revision: https://reviews.llvm.org/D67459
llvm-svn: 371677
fp128 is considered a legal type for a register, but has almost no legal operations so everything needs to be converted to a libcall. Previously this was implemented by tricking type legalization into softening the operations with various checks for "is legal in hardware register" to change the behavior to still use f128 as the resulting type instead of converting to i128.
This patch abandons this approach and instead moves the libcall conversions to LegalizeDAG. This is the approach taken by AArch64 where they also have a legal fp128 type, but no legal operations. I think this is more in spirit with how SelectionDAG's phases are supposed to work.
I had to make some hacks for STRICT_FP_ROUND because some of the strict FP handling checks if ISD::FP_ROUND is Legal for a given result type, but I had to make ISD::FP_ROUND Custom to allow making a libcall when the input is f128. For all other types the Custom handler just returns the original node. These hacks are incomplete and don't work for a strict truncate from f128, but I don't think it worked before either since LegalizeFloatTypes doesn't know about strict ops yet. I've also raised PR43209 against AArch64 which currently crashes on a strict ftrunc from f64->f32 because of FP_ROUND being marked Custom for the same reason there.
Differential Revision: https://reviews.llvm.org/D67128
llvm-svn: 371672
Summary:
After hoisting and merging m0 initializations schedule them as early as
possible in the MBB. This helps the scheduler avoid hazards in some
cases.
Reviewers: rampitec, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67450
llvm-svn: 371671
Emit debug entry values using standard DWARF5 opcodes when the debugger
tuning is set to lldb.
Differential Revision: https://reviews.llvm.org/D67410
llvm-svn: 371666
This patch adds the ability to create a gsym::LineTable object, populate it, encode and decode it and test all functionality.
The full format of the LineTable encoding is specified in the header file LineTable.h.
Differential Revision: https://reviews.llvm.org/D66602
llvm-svn: 371657
Summary:
During IR Linking, if the types of two globals in destination and source
modules are the same, it can only be because the global in the
destination module is originally from the source module and got added to
the destination module from a shared metadata.
We shouldn't map this type to itself in case the type's components get
remapped to a new type from the destination (for instance, during the
loop over SrcM->getIdentifiedStructTypes() further below in
IRLinker::computeTypeMapping()).
Fixes PR40312.
Reviewers: tejohnson, pcc, srhines
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66814
llvm-svn: 371643
If there are multiple dead defs of the same virtual register, these
are required to be split into multiple virtual registers with separate
live intervals to avoid a verifier error.
llvm-svn: 371640
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371635
This was actually the original intention in D67332,
but i messed up and forgot about it.
This patch was originally part of D67411, but precommitting this.
llvm-svn: 371630
adding new read attribute to an argument
Summary: Update optimization pass to prevent adding read-attribute to an
argument without removing its conflicting attribute.
A read attribute, based on the result of the attribute deduction
process, might be added to an argument. The attribute might be in
conflict with other read/write attribute currently associated with the
argument. To ensure the compatibility of attributes, conflicting
attribute, if any, must be removed before a new one is added.
The following snippet shows the current behavior of the compiler, where
the compilation process is aborted due to incompatible attributes.
$ cat x.ll
; ModuleID = 'x.bc'
%_type_of_d-ccc = type <{ i8*, i8, i8, i8, i8 }>
@d-ccc = internal global %_type_of_d-ccc <{ i8* null, i8 1, i8 13, i8 0,
i8 -127 }>, align 8
define void @foo(i32* writeonly %.aaa) {
foo_entry:
%_param_.aaa = alloca i32*, align 8
store i32* %.aaa, i32** %_param_.aaa, align 8
store i8 0, i8* getelementptr inbounds (%_type_of_d-ccc,
%_type_of_d-ccc* @d-ccc, i32 0, i32 3)
ret void
}
$ opt -O3 x.ll
Attributes 'readnone and writeonly' are incompatible!
void (i32*)* @foo
in function foo
LLVM ERROR: Broken function found, compilation aborted!
The purpose of this changeset is to fix the above error. This fix is
based on a suggestion from Johannes @jdoerfert (many thanks!!!)
Authored By: anhtuyen
Reviewer: nicholas, rnk, chandlerc, jdoerfert
Reviewed By: rnk
Subscribers: hiraditya, jdoerfert, llvm-commits, anhtuyen, LLVM
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D58694
llvm-svn: 371622
(srem X, pow2C) sgt/slt 0 can be reduced using bit hacks by masking
off the sign bit and the module (low) bits:
https://rise4fun.com/Alive/jSO
A '2' divisor allows slightly more folding:
https://rise4fun.com/Alive/tDBM
Any chance to remove an 'srem' use is probably worthwhile, but this is limited
to the one-use improvement case because doing more may expose other missing
folds. That means it does nothing for PR21929 yet:
https://bugs.llvm.org/show_bug.cgi?id=21929
Differential Revision: https://reviews.llvm.org/D67334
llvm-svn: 371610
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
When value of immediate in `mips.nori.b` is 255 (which has all ones in
binary form as 8bit integer) DAGCombiner and Legalizer would fall in an
infinite loop. DAGCombiner would try to simplify `or %value, -1` by
turning `%value` into UNDEF. Legalizer will turn it back into `Constant<0>`
which would then be again turned into UNDEF by DAGCombiner. To avoid this
loop we make UNDEF legal for MSA int types on Mips.
Patch by Mirko Brkusanin.
Differential Revision: https://reviews.llvm.org/D67280
llvm-svn: 371607
This reverts commit r371584. It introduced a dependency from compiler-rt
to llvm/include/ADT, which is problematic for multiple reasons.
One is that it is a novel dependency edge, which needs cross-compliation
machinery for llvm/include/ADT (yes, it is true that right now
compiler-rt included only header-only libraries, however, if we allow
compiler-rt to depend on anything from ADT, other libraries will
eventually get used).
Secondly, depending on ADT from compiler-rt exposes ADT symbols from
compiler-rt, which would cause ODR violations when Clang is built with
the profile library.
llvm-svn: 371598
Currently we only rely on the induction increment to come before the
condition to ensure the required instructions get moved to the new
latch.
This patch duplicates and moves the required instructions to the
newly created latch. We move the condition to the end of the new block,
then process its operands. We stop at operands that are defined
outside the loop, or are the induction PHI.
We duplicate the instructions and update the uses in the moved
instructions, to ensure other users remain intact. See the added
test2 for such an example.
Reviewers: efriedma, mcrosier
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D67367
llvm-svn: 371595
Configure TLI to say that r600/amdgpu does not have any library
functions, such that InstCombine does not do anything like turn sin/cos
into the library function @tan with sufficient fast math flags.
Differential Revision: https://reviews.llvm.org/D67406
Change-Id: I02f907d3e64832117ea9800e9f9285282856e5df
llvm-svn: 371592
Summary:
We can query to Attributor whether the value is captured in the scope or not on the following way:
```
const auto & NoCapAA = A.getAAFor<AANoCapture>(*this, IRPosition::value(V));
```
And if V is CallSiteReturned then `getDeducedAttribute` will add `nocatpure` to the callsite returned value. It is not valid.
This patch checks the position is an argument or call site argument.
This is tested in D67286.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67342
llvm-svn: 371589
TryToSinkInstruction() has a bug: While updating debug info for
sunk instruction, it could clone dbg.declare intrinsic.
That is wrong. There could be only one dbg.declare.
The fix is to not clone dbg.declare intrinsic and to update
it`s arguments, to not to point to sunk instruction.
Differential Revision: https://reviews.llvm.org/D67217
llvm-svn: 371587
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371584
Summary:
This commit is the final one for adding tapi support to the llvm-nm implementation.
This commit also has accompanying tests the additions to lib/Object
Reviewers: ributzka, steven_wu
Reviewed By: ributzka
Subscribers: hiraditya, plotfi, dexonsmith, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66160
llvm-svn: 371576
Reverts the change in r371084, but keeps the test.
After r371565, debuginfo cannot be modelled in MemorySSA, even with a
non-standard AA pipeline.
llvm-svn: 371573
This fixes a crash in tail call translation caused by assume and lifetime_end
intrinsics.
It's possible to have instructions other than a return after a tail call which
will still have `Analysis::isInTailCallPosition` return true. (Namely,
lifetime_end and assume intrinsics.)
If we emit a tail call, we should stop translating instructions in the block.
Otherwise, we can end up emitting an extra return, or dead instructions in
general. This makes the verifier unhappy, and is generally unfortunate for
codegen.
This also removes the code from AArch64CallLowering that checks if we have a
tail call when lowering a return. This is covered by the new code now.
Also update call-translator-tail-call.ll to show that we now properly tail call
in the presence of lifetime_end and assume.
Differential Revision: https://reviews.llvm.org/D67415
llvm-svn: 371572
Add support for sibcalling calls whose calling convention differs from the
caller's.
- Port over `CCState::resultsCombatible` from CallingConvLower.cpp into
CallLowering. This is used to verify that the way the caller and callee CC
handle incoming arguments matches up.
- Add `CallLowering::analyzeCallResult`. This is basically a port of
`CCState::AnalyzeCallResult`, but using `ArgInfo` rather than `ISD::InputArg`.
- Add `AArch64CallLowering::doCallerAndCalleePassArgsTheSameWay`. This checks
that the calling conventions are compatible, and that the caller and callee
preserve the same registers.
For testing:
- Update call-translator-tail-call.ll to show that we can now handle this.
- Add a GISel line to tailcall-ccmismatch.ll to show that we will not tail call
when the regmasks don't line up.
Differential Revision: https://reviews.llvm.org/D67361
llvm-svn: 371570
Summary:
Do not model debuginfo intrinsics in MemorySSA.
Regularly these are non-memory modifying instructions. With -disable-basicaa, they were being modelled as Defs.
Reviewers: george.burgess.iv
Subscribers: aprantl, Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67307
llvm-svn: 371565
so that you don't have to link Error.o and all of its dependencies.
In more detail: global initializers in Error.o can't be elided with
-ffunction-sections/-gc-sections since they always need to be run
causing a fairly significant binary bloat if all you want is the
ABI breaking checks code.
Differential Revision: https://reviews.llvm.org/D67387
llvm-svn: 371561
Expose a utility function so that all places which want to suppress speculation (when otherwise legal) due to ordering and/or sanitizer interaction can do so.
llvm-svn: 371556
See D66309 for context.
This is the first sweep of x86 target specific code to add isAtomic bailouts where appropriate. The intention here is to have the switch from AtomicSDNode to LoadSDNode/StoreSDNode be close to NFC; that is, I'm not looking to allow additional optimizations at this time.
Sorry for the lack of tests. As discussed in the review, most of these are vector tests (for which atomicity is not well defined) and I couldn't figure out to exercise the anyextend cases which aren't vector specific.
Differential Revision: https://reviews.llvm.org/D66322
llvm-svn: 371547
The scalar f64 patterns don't work yet because they fail on multiple
results from the unused implicit def of scc in the result bit
operation.
llvm-svn: 371542
Since NaN is very rare in normal programs, so the probability for floating point unordered comparison should be extremely small. Current probability is 3/8, it is too large, this patch changes it to a tiny number.
Differential Revision: https://reviews.llvm.org/D65303
llvm-svn: 371541
f64 doesn't work yet because tablegen currently doesn't handlde
REG_SEQUENCE.
This does regress some multi use VALU fneg cases since now the
immediate remains in an SGPR, and more moves are used for legalizing
the xor. This is a SIFixSGPRCopies deficiency.
llvm-svn: 371540
Summary:
Now that llvm-objdump allows target-specific options, we match the
`no-aliases` and `numeric` options for RISC-V, as supported by GNU objdump.
This is done by overriding the variables used for the command-line options, so
that the command-line options are still supported.
This patch updates all tests using `llvm-objdump -riscv-no-aliases` to use
`llvm-objdump -M no-aliases`.
Reviewers: luismarques, asb
Reviewed By: luismarques, asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66139
llvm-svn: 371534
There's still a lot more to do, but this handles decomposing due to
alignment. I've gotten it to the point where nothing crashes or
infinite loops the legalizer.
llvm-svn: 371533
Summary:
This is an option primarily to use during testing. Instead of always
printing registers using their ABI names, this allows a user to request they
are printed with their architectural name.
This is then used in the register constraint tests to ensure the mapping
between architectural and abi names is correct.
Reviewers: asb, luismarques
Reviewed By: asb
Subscribers: pzheng, hiraditya, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, kito-cheng, shiva0217, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, rkruppe, PkmX, jocewei, psnobl, benna, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65950
llvm-svn: 371531
This allows us to fold fma's that multiply with 0.0. Also, the
multiply by 1.0 case is handled there as well. The fneg/fabs cases
are not handled by SimplifyFMulInst, so we need to keep them.
Reviewers: spatel, anemet, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D67351
llvm-svn: 371518
Adding testscases for this via llvm-dwarfdump.
Also add testcases for the existing resolver support for X86.
Differential Revision: https://reviews.llvm.org/D67340
llvm-svn: 371515
The address difference between two sections in a PT_LOAD is a constant.
Consider a hypothetical case (pagesize can be very small, say, 4).
```
.text sh_addralign=4
.text.hot sh_addralign=16
```
If we set p_align to 4, the PT_LOAD will be loaded at an address which
is a multiple of 4. The address of .text.hot is guaranteed to be a
multiple of 4, but not necessarily a multiple of 16.
This patch deletes the constraint
if (SHeader->sh_offset == PHeader.p_offset)
Reviewed By: grimar, jhenderson
Differential Revision: https://reviews.llvm.org/D67260
llvm-svn: 371501
This can only happen on X86 when fp128 is a legal type, but we
go through softening to generate libcalls. This causes fp128 to
be softened to fp128 instead of an integer type. This can be
removed if D67128 lands.
llvm-svn: 371493
This patch contains the basic functionality for reporting potentially
incorrect usage of __builtin_expect() by comparing the developer's
annotation against a collected PGO profile. A more detailed proposal and
discussion appears on the CFE-dev mailing list
(http://lists.llvm.org/pipermail/cfe-dev/2019-July/062971.html) and a
prototype of the initial frontend changes appear here in D65300
We revised the work in D65300 by moving the misexpect check into the
LLVM backend, and adding support for IR and sampling based profiles, in
addition to frontend instrumentation.
We add new misexpect metadata tags to those instructions directly
influenced by the llvm.expect intrinsic (branch, switch, and select)
when lowering the intrinsics. The misexpect metadata contains
information about the expected target of the intrinsic so that we can
check against the correct PGO counter when emitting diagnostics, and the
compiler's values for the LikelyBranchWeight and UnlikelyBranchWeight.
We use these branch weight values to determine when to emit the
diagnostic to the user.
A future patch should address the comment at the top of
LowerExpectIntrisic.cpp to hoist the LikelyBranchWeight and
UnlikelyBranchWeight values into a shared space that can be accessed
outside of the LowerExpectIntrinsic pass. Once that is done, the
misexpect metadata can be updated to be smaller.
In the long term, it is possible to reconstruct portions of the
misexpect metadata from the existing profile data. However, we have
avoided this to keep the code simple, and because some kind of metadata
tag will be required to identify which branch/switch/select instructions
are influenced by the use of llvm.expect
Patch By: paulkirth
Differential Revision: https://reviews.llvm.org/D66324
llvm-svn: 371484
This is an alternative to D66980, which was reverted. Instead of
inserting a pseudo instruction that optionally expands to nothing, add a
pass that inserts int3 when appropriate after basic block layout.
Reviewers: hans
Differential Revision: https://reviews.llvm.org/D67201
llvm-svn: 371466
If we're vectorizing a load in a predicated block, check to see if the load can be speculated rather than predicated. This allows us to generate a normal vector load instead of a masked.load.
To do so, we must prove that all bytes accessed on any iteration of the original loop are dereferenceable, and that all loads (across all iterations) are properly aligned. This is equivelent to proving that hoisting the load into the loop header in the original scalar loop is safe.
Note: There are a couple of code motion todos in the code. My intention is to wait about a day - to be sure this sticks - and then perform the NFC motion without furthe review.
Differential Revision: https://reviews.llvm.org/D66688
llvm-svn: 371452
This is the first patch in a large sequence. The eventual goal is to have unordered atomic loads and stores - and possibly ordered atomics as well - handled through the normal ISEL codepaths for loads and stores. Today, there handled w/instances of AtomicSDNodes. The result of which is that all transforms need to be duplicated to work for unordered atomics. The benefit of the current design is that it's harder to introduce a silent miscompile by adding an transform which forgets about atomicity. See the thread on llvm-dev titled "FYI: proposed changes to atomic load/store in SelectionDAG" for further context.
Note that this patch is NFC unless the experimental flag is set.
The basic strategy I plan on taking is:
introduce infrastructure and a flag for testing (this patch)
Audit uses of isVolatile, and apply isAtomic conservatively*
piecemeal conservative* update generic code and x86 backedge code in individual reviews w/tests for cases which didn't check volatile, but can be found with inspection
flip the flag at the end (with minimal diffs)
Work through todo list identified in (2) and (3) exposing performance ops
(*) The "conservative" bit here is aimed at minimizing the number of diffs involved in (4). Ideally, there'd be none. In practice, getting it down to something reviewable by a human is the actual goal. Note that there are (currently) no paths which produce LoadSDNode or StoreSDNode with atomic MMOs, so we don't need to worry about preserving any behaviour there.
We've taken a very similar strategy twice before with success - once at IR level, and once at the MI level (post ISEL).
Differential Revision: https://reviews.llvm.org/D66309
llvm-svn: 371441
Handle it the same way as G_BUILD_VECTOR_TRUNC. Arguably only
G_BUILD_VECTOR_TRUNC should be legal for this, but G_BUILD_VECTOR will
probably be more convenient in most cases.
llvm-svn: 371440
If analyzeBranch fails, on some targets, the out parameters point to
some blocks in the function. But we can't use that information, so make
sure to clear it out. (In some places in IfConversion, we assume that
any block with a TrueBB is analyzable.)
The change to the testcase makes it trigger a bug on builds without this
fix: IfConvertDiamond tries to perform a followup "merge" operation,
which isn't legal, and we somehow end up with a branch to a deleted MBB.
I'm not sure how this doesn't crash the compiler.
Differential Revision: https://reviews.llvm.org/D67306
llvm-svn: 371434
This enables GlobalISel to handle various intrinsics. The custom node
pattern will be ignored, and the intrinsic will work. This will also
allow SelectionDAG to directly select the intrinsics, but as they are
all custom lowered to the nodes, this ends up leaving dead code in the
table.
Eventually either GlobalISel should add the equivalent of custom nodes
equivalent, or intrinsics should be directly used. These each have
different tradeoffs.
There are a few more to handle, but these are easy to handle
ones. Some others fail for other reasons.
llvm-svn: 371432
Current for SAE instructions we only allow _MM_FROUND_CUR_DIRECTION(bit 2) or _MM_FROUND_NO_EXC(bit 3) to be used as the immediate passed to the inrinsics. But these instructions don't perform rounding so _MM_FROUND_CUR_DIRECTION is just sort of a default placeholder when you don't want to suppress exceptions. Using _MM_FROUND_NO_EXC by itself is really bit equivalent to (_MM_FROUND_NO_EXC | _MM_FROUND_TO_NEAREST_INT) since _MM_FROUND_TO_NEAREST_INT is 0. Since we aren't rounding on these instructions we should also accept (_MM_FROUND_CUR_DIRECTION | _MM_FROUND_NO_EXC) as equivalent to (_MM_FROUND_NO_EXC). icc allows this, but gcc does not.
Differential Revision: https://reviews.llvm.org/D67289
llvm-svn: 371430
The bitstream remark serializer landed in r367372.
This adds a bitstream remark parser that parser bitstream remark files
to llvm::remarks::Remark objects through the RemarkParser interface.
A few interesting things to point out:
* There are parsing helpers to parse the different types of blocks
* The main parsing helper allows us to parse remark metadata and open an
external file containing the encoded remarks
* This adds a dependency from the Remarks library to the BitstreamReader
library
* The testing strategy is to create a remark entry through YAML, parse
it, serialize it to bitstream, parse that back and compare the objects.
* There are close to no tests for malformed bitstream remarks, due to
the lack of textual format for the bitstream format.
* This adds a new C API for parsing bitstream remarks:
LLVMRemarkParserCreateBitstream.
* This bumps the REMARKS_API_VERSION to 1.
Differential Revision: https://reviews.llvm.org/D67134
llvm-svn: 371429
microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
Unfortunately MnemonicAlias defines a "Predicates" field just like an
instruction or pattern, with a somewhat different interpretation.
This ends up overriding the intended Predicates set by
PredicateControl on the pseudoinstruction defintions with an empty
list. This allowed incorrectly selecting instructions that should have
been rejected due to the SubtargetPredicate from patterns on the
instruction definition.
This does remove the divergent predicate from the 64-bit shift
patterns, which were already not used for the 32-bit shift, so I'm not
sure what the point was. This also removes a second, redundant copy of
the 64-bit divergent patterns.
llvm-svn: 371427
Just return once you emit the call, which is exactly what SelectionDAG does in
this situation.
Update call-translator-tail-call.ll.
Also update dllimport.ll to show that we tail call here in GISel again. Add
-verify-machineinstrs to the GISel line too, to defend against verifier
failures.
Differential revision: https://reviews.llvm.org/D67282
llvm-svn: 371425
Treat this as legal on gfx9 since it can use S_PACK_* instructions for
this.
This isn't used by anything yet. The same will probably apply to
16-bit G_BUILD_VECTOR without the trunc.
llvm-svn: 371423
This fixes a bug as well. When "FileSize:" (p_filesz) is specified and
different from the actual value, the following code probably should not
use PHeader.p_filesz:
if (SHeader->sh_offset == PHeader.p_offset + PHeader.p_filesz)
PHeader.p_memsz += SHeader->sh_size;
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D67256
llvm-svn: 371420
These predicate vectors can usually be loaded and stored with a single
instruction, a VSTR_P0. However this instruction will store the entire P0
predicate, 16 bits, zeroextended to 32bits. Each lane of the the
v4i1/v8i1/v16i1 representing 4/2/1 bits.
As far as I understand, when llvm says "store this v4i1", it really does need
to store 4 bits (or 8, that being the size of a byte, with this bottom 4 as the
interesting bits). For example a bitcast from a v8i1 to a i8 is defined as a
store followed by a load, which is how the code is expanded.
So this instead lowers the v4i1/v8i1 load/store through some shuffles to get
the bits into the correct positions. This, as you might imagine, is not as
efficient as a single instruction. But I believe it is needed for correctness.
v16i1 equally should not load/store 32bits, only storing the 16bits of data.
Stack loads/stores are still using the VSTR_P0 (as can be seen by the test not
changing). This is fine as they are self-consistent, it is only "externally
observable loads/stores" (from our point of view) that need to be corrected.
Differential revision: https://reviews.llvm.org/D67085
llvm-svn: 371419
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
George Rimar