I don't really understand the costs we're using for fp_to_sint,
but prior to widening legalization we used 20 as the cost for this
via the v2i64->v2f64 entry. That number seems better than the 40
we got with widening legalization. So now we need either a
v2i32->v2f64 entry or a v4i32->v2f64 entry depending on whether
AVX is enabled or not since we skip the first SSE2 table look up
under AVX.
llvm-svn: 369628
Now that we're using widening legalization. We need to improve our extract_subvector cost model for these types. This patch begins by modeling these as a subvector extract followed by a permute. I've left FIXMEs in the code for future improvements.
Differential Revision: https://reviews.llvm.org/D65892
llvm-svn: 369022
Now that we legalize by widening, the element types here won't change. Previously these were modeled as the elements being widened and then the instruction might become an AND or SHL/ASHR pair. But now they'll become something like a ZERO_EXTEND_VECTOR_INREG/SIGN_EXTEND_VECTOR_INREG.
For AVX2, when the destination type is legal its clear the cost should be 1 since we have extend instructions that can produce 256 bit vectors from less than 128 bit vectors. I'm a little less sure about AVX1 costs, but I think the ones I changed were definitely too high, but they might still be too high.
Differential Revision: https://reviews.llvm.org/D66169
llvm-svn: 368858
The assert that caused this to be reverted should be fixed now.
Original commit message:
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 368183
This patch changes our defualt legalization behavior for 16, 32, and
64 bit vectors with i8/i16/i32/i64 scalar types from promotion to
widening. For example, v8i8 will now be widened to v16i8 instead of
promoted to v8i16. This keeps the elements widths the same and pads
with undef elements. We believe this is a better legalization strategy.
But it carries some issues due to the fragmented vector ISA. For
example, i8 shifts and multiplies get widened and then later have
to be promoted/split into vXi16 vectors.
This has the potential to cause regressions so we wanted to get
it in early in the 10.0 cycle so we have plenty of time to
address them.
Next steps will be to merge tests that explicitly test the command
line option. And then we can remove the option and its associated
code.
llvm-svn: 367901
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
Summary:
This reuses the getArithmeticInstrCost, but passes dummy values of the second
operand flags.
The X86 costs are wrong and can be improved in a follow up. I just wanted to
stop it from reporting an unknown cost first.
Reviewers: RKSimon, spatel, andrew.w.kaylor, cameron.mcinally
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62444
llvm-svn: 361788
The original costs stopped at SSE42, I've added conservative estimates for everything down to SSE1/SSE2 and moved some of the SSE42 costs to SSE41 (really only the addition of PCMPGT makes any difference).
I've also added missing vXi8 costs (we use PHMINPOSUW for i8/i16 for scarily quick results) and 256-bit vector costs for AVX1.
llvm-svn: 360528
On pre-AVX512 targets we can use MOVMSK to extract reduced boolean results. This is properly optimized, annoyingly AVX512 isn't and produces code that is almost as bad as the (unchanged) costs suggest......
Differential Revision: https://reviews.llvm.org/D60403
llvm-svn: 358574
Based on an IR equivalent of target lowering's generic expansion - target specific costs will typically be lower (IR doesn't have a good mull/mulh equivalent) but we need a baseline.
Differential Revision: https://reviews.llvm.org/D57925
llvm-svn: 354774
Followup to D56636, this time handling the UADDSAT case by expanding
uadd.sat(a, b) to umin(a, ~b) + b.
Differential Revision: https://reviews.llvm.org/D56869
llvm-svn: 352409
Add generic costs calculation for SADDSAT/SSUBSAT intrinsics, this uses generic costs for sadd_with_overflow/ssub_with_overflow, an extra sign comparison + a selects based on the sign/overflow.
This completes PR40316
Differential Revision: https://reviews.llvm.org/D57239
llvm-svn: 352315
Add generic costs calculation for UADDSAT/USUBSAT intrinsics, this fallbacks to using generic costs for uadd_with_overflow/usub_with_overflow + a select.
Differential Revision: https://reviews.llvm.org/D56907
llvm-svn: 352044
This patch replaces the existing LLVMVectorSameWidth matcher with LLVMScalarOrSameVectorWidth.
The matching args must be either scalars or vectors with the same number of elements, but in either case the scalar/element type can differ, specified by LLVMScalarOrSameVectorWidth.
I've updated the _overflow intrinsics to demonstrate this - allowing it to return a i1 or <N x i1> overflow result, matching the scalar/vectorwidth of the other (add/sub/mul) result type.
The masked load/store/gather/scatter intrinsics have also been updated to use this, although as we specify the reference type to be llvm_anyvector_ty we guarantee the mask will be <N x i1> so no change in behaviour
Differential Revision: https://reviews.llvm.org/D57090
llvm-svn: 351957
First step towards PR40376, this patch adds support for getCmpSelInstrCost to use the (optional) Instruction CmpInst predicate to indicate the type of integer comparison we're performing and alter the costs accordingly.
Differential Revision: https://reviews.llvm.org/D57013
llvm-svn: 351810
Prior to SSE41 (and sometimes on AVX1), vector select has to be performed as a ((X & C)|(Y & ~C)) bit select.
Exposes a couple of issues with the min/max reduction costs (which only go down to SSE42 for some reason).
The increase pre-SSE41 selection costs also prevent a couple of tests from firing any longer, so I've either tweaked the target or added AVX tests as well to the existing SSE2 tests.
llvm-svn: 351685
Noticed in D56011 - handle the case that scalar fp ops are quicker on P3 than P4
Add the other costs so that we're not relying on the default "is legal/custom" cost logic.
llvm-svn: 350403
Simon Pilgrim