r371901 was overeager and widenScalarDst() and the like in the legalizer
attempt to increment the insert point given in order to add new instructions
after the currently legalizing inst. In cases where the insertion point is not
exactly the current instruction, then callers need to de-compensate for the
behaviour by decrementing the insertion iterator before calling them. It's not
a nice state of affairs, for now just undo the problematic parts of the change.
llvm-svn: 372050
Summary:
Adds the following inline asm constraints for SVE:
- Upl: One of the low eight SVE predicate registers, P0 to P7 inclusive
- Upa: SVE predicate register with full range, P0 to P15
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, cameron.mcinally, greened, rengolin
Reviewed By: rovka
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66524
llvm-svn: 371967
After our previous machinecombiner exercises (rL371321, rL371818, rL371833), we
were still missing a few FP16 FMA patterns.
Differential Revision: https://reviews.llvm.org/D67576
llvm-svn: 371960
For some reason we sometimes insert new instructions one instruction before
the first non-PHI when legalizing. This can result in having non-PHI
instructions before PHIs, which mean that PHI elimination doesn't catch them.
Differential Revision: https://reviews.llvm.org/D67570
llvm-svn: 371901
Because memory intrinsics are handled differently than other calls, we need to
check them for tail call eligiblity in the legalizer. This allows us to still
inline them when it's beneficial to do so, but also tail call when possible.
This adds simple tail calling support for when the intrinsic is followed by a
return.
It ports the attribute checks from `TargetLowering::isInTailCallPosition` into
a similarly-named function in LegalizerHelper.cpp. The target-specific
`isUsedByReturnOnly` hook is not ported here.
Update tailcall-mem-intrinsics.ll to show that GlobalISel can now tail call
memory intrinsics.
Update legalize-memcpy-et-al.mir to have a case where we don't tail call.
Differential Revision: https://reviews.llvm.org/D67566
llvm-svn: 371893
This adds support for tail calling callees with varargs, equivalent to how it
is done in AArch64ISelLowering.
This only works for sibling calls, and does not add the necessary support for
musttail with varargs. (See r345641 for equivalent ISelLowering support.) This
should be implemented when we stop falling back on musttail.
Update call-translator-tail-call.ll to show that we can now tail call varargs.
Differential Revision: https://reviews.llvm.org/D67518
llvm-svn: 371868
Follow up of rL371321 that added FMA FP16 patterns. This adds more tests
for @llvm.fma.f16. This probably shows we miss one fmsub optimisation
opportunity, which I will look into.
llvm-svn: 371833
Swiftself uses a callee-saved register. We can tail call when the register used
in the caller and callee is the same.
This behaviour is equivalent to that in `TargetLowering::parametersInCSRMatch`.
Update call-translator-tail-call.ll to verify that we can do this. When we
support inline assembly, we can write a check similar to the one in the
general swiftself.ll. For now, we need to verify that we get the correct COPY
instruction after call lowering.
Differential Revision: https://reviews.llvm.org/D67511
llvm-svn: 371788
This adds support for lowering sibling calls with outgoing arguments.
e.g
```
define void @foo(i32 %a)
```
Support is ported from AArch64ISelLowering's `isEligibleForTailCallOptimization`.
The only thing that is missing is a full port of
`TargetLowering::parametersInCSRMatch`. So, if we're using swiftself,
we'll never tail call.
- Rename `analyzeCallResult` to `analyzeArgInfo`, since the function is now used
for both outgoing and incoming arguments
- Teach `OutgoingArgHandler` about tail calls. Tail calls use frame indices for
stack arguments.
- Teach `lowerFormalArguments` to set the bytes in the caller's stack argument
area. This is used later to check if the tail call's parameters will fit on
the caller's stack.
- Add `areCalleeOutgoingArgsTailCallable` to perform the eligibility check on
the callee's outgoing arguments.
For testing:
- Update call-translator-tail-call to verify that we can now tail call with
outgoing arguments, use G_FRAME_INDEX for stack arguments, and respect the
size of the caller's stack
- Remove GISel-specific check lines from speculation-hardening.ll, since GISel
now tail calls like the other selectors
- Add a GISel test line to tailcall-string-rvo.ll since we can tail call in that
test now
- Add a GISel test line to tailcall_misched_graph.ll since we tail call there
now. Add specific check lines for GISel, since the debug output from the
machine-scheduler differs with GlobalISel. The dependency still holds, but
the output comes out in a different order.
Differential Revision: https://reviews.llvm.org/D67471
llvm-svn: 371780
This is the main CodeGen patch to support the arm64_32 watchOS ABI in LLVM.
FastISel is mostly disabled for now since it would generate incorrect code for
ILP32.
llvm-svn: 371722
First we were asserting that the ValNo of a VA was the wrong value. It doesn't actually
make a difference for us in CallLowering but fix that anyway to silence the assert.
The bigger issue was that after fixing the assert we were generating invalid MIR
because the merging/unmerging of values split across multiple registers wasn't
also implemented for memory locs. This happens when we run out of registers and
have to pass the split types like i128 -> i64 x 2 on the stack. This is do-able, but
for now just fall back.
llvm-svn: 371693
Before, we only checked the callee for swifterror. However, we should also be
checking the caller to see if it has a swifterror parameter.
Since we don't currently handle outgoing arguments, this didn't show up in the
swifterror.ll testcase.
Also, remove the swifterror checks from call-translator-tail-call.ll, since
they are covered by the existing swifterror testing. Better to have it all in
one place.
Differential Revision: https://reviews.llvm.org/D67465
llvm-svn: 371692
Summary:
This catches malformed mir files which specify alignment as log2 instead of pow2.
See https://reviews.llvm.org/D65945 for reference,
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: MatzeB, qcolombet, dschuff, arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, s.egerton, pzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67433
llvm-svn: 371608
This fixes a crash in tail call translation caused by assume and lifetime_end
intrinsics.
It's possible to have instructions other than a return after a tail call which
will still have `Analysis::isInTailCallPosition` return true. (Namely,
lifetime_end and assume intrinsics.)
If we emit a tail call, we should stop translating instructions in the block.
Otherwise, we can end up emitting an extra return, or dead instructions in
general. This makes the verifier unhappy, and is generally unfortunate for
codegen.
This also removes the code from AArch64CallLowering that checks if we have a
tail call when lowering a return. This is covered by the new code now.
Also update call-translator-tail-call.ll to show that we now properly tail call
in the presence of lifetime_end and assume.
Differential Revision: https://reviews.llvm.org/D67415
llvm-svn: 371572
Add support for sibcalling calls whose calling convention differs from the
caller's.
- Port over `CCState::resultsCombatible` from CallingConvLower.cpp into
CallLowering. This is used to verify that the way the caller and callee CC
handle incoming arguments matches up.
- Add `CallLowering::analyzeCallResult`. This is basically a port of
`CCState::AnalyzeCallResult`, but using `ArgInfo` rather than `ISD::InputArg`.
- Add `AArch64CallLowering::doCallerAndCalleePassArgsTheSameWay`. This checks
that the calling conventions are compatible, and that the caller and callee
preserve the same registers.
For testing:
- Update call-translator-tail-call.ll to show that we can now handle this.
- Add a GISel line to tailcall-ccmismatch.ll to show that we will not tail call
when the regmasks don't line up.
Differential Revision: https://reviews.llvm.org/D67361
llvm-svn: 371570
Just return once you emit the call, which is exactly what SelectionDAG does in
this situation.
Update call-translator-tail-call.ll.
Also update dllimport.ll to show that we tail call here in GISel again. Add
-verify-machineinstrs to the GISel line too, to defend against verifier
failures.
Differential revision: https://reviews.llvm.org/D67282
llvm-svn: 371425
Summary:
This patch implements two arithmetic intrinsics:
* int_aarch64_sve_abs
* int_aarch64_sve_neg
testing the support for scalable vector types in intrinsics added in D65930.
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D65931
llvm-svn: 371388
Loosely based on DAGCombiner version, but this part is slightly simpler in
GlobalIsel because all address calculation is performed by G_GEP. That makes
the inc/dec distinction moot so there's just pre/post to think about.
No targets can handle it yet so testing is via a special flag that overrides
target hooks.
llvm-svn: 371384
This patch enables generation of fused multiply add/sub for instructions operating on fp16.
Tested on aarch64-linux.
Differential Revision: https://reviews.llvm.org/D67297
llvm-svn: 371321
Despite the fact that the localizer's original motivation was to fix horrendous
constant spilling at -O0, shortening live ranges still has net benefits even
with optimizations enabled.
On an -Os build of CTMark, doing this improves code size by 0.5% geomean.
There are a few regressions, bullet increasing in size by 0.5%. One example from
bullet where code size increased slightly was due to GlobalISel actually now
generating the same code as SelectionDAG. So we actually have an opportunity
in future to implement better heuristics for localization and therefore be
*better* than SDAG in some cases. In relation to other optimizations though that
one is relatively minor.
Differential Revision: https://reviews.llvm.org/D67303
llvm-svn: 371266
-tailcallopt requires that we perform different stack adjustments than with
sibling calls. For example, the `@caller_to0_from8` function in
test/CodeGen/AArch64/tail-call.ll requires that we adjust SP. Without
-tailcallopt, this adjustment does not happen. With it, however, it is expected.
So, to ensure that adding sibling call support doesn't break -tailcallopt,
make CallLowering always fall back on possible tail calls when -tailcallopt
is passed in.
Update test/CodeGen/AArch64/tail-call.ll with a GlobalISel line to make sure
that we don't differ from the SDAG implementation at any point.
Differential Revision: https://reviews.llvm.org/D67245
llvm-svn: 371227
This was only using the correct register constraints if this was the
final result instruction. If the extract was a sub instruction of the
result, it would attempt to use GIR_ConstrainSelectedInstOperands on a
COPY, which won't work. Move the handling to
createAndImportSubInstructionRenderer so it works correctly.
I don't fully understand why runOnPattern and
createAndImportSubInstructionRenderer both need to handle these
special cases, and constrain them with slightly different methods. If
I remove the runOnPattern handling, it does break the constraint when
the final result instruction is EXTRACT_SUBREG.
llvm-svn: 371150
Recommit basic sibling call lowering (https://reviews.llvm.org/D67189)
The issue was that if you have a return type other than void, call lowering
will emit COPYs to get the return value after the call.
Disallow sibling calls other than ones that return void for now. Also
proactively disable swifterror tail calls for now, since there's a similar issue
with COPYs there.
Update call-translator-tail-call.ll to include test cases for each of these
things.
llvm-svn: 371114
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
........
This fails on EXPENSIVE_CHECKS builds due to a -verify-machineinstrs test failure in CodeGen/AArch64/dllimport.ll
llvm-svn: 371051
This adds support for basic sibling call lowering in AArch64. The intent here is
to only handle tail calls which do not change the ABI (hence, sibling calls.)
At this point, it is very restricted. It does not handle
- Vararg calls.
- Calls with outgoing arguments.
- Calls whose calling conventions differ from the caller's calling convention.
- Tail/sibling calls with BTI enabled.
This patch adds
- `AArch64CallLowering::isEligibleForTailCallOptimization`, which is equivalent
to the same function in AArch64ISelLowering.cpp (albeit with the restrictions
above.)
- `mayTailCallThisCC` and `canGuaranteeTCO`, which are identical to those in
AArch64ISelLowering.cpp.
- `getCallOpcode`, which is exactly what it sounds like.
Tail/sibling calls are lowered by checking if they pass target-independent tail
call positioning checks, and checking if they satisfy
`isEligibleForTailCallOptimization`. If they do, then a tail call instruction is
emitted instead of a normal call. If we have a sibling call (which is always the
case in this patch), then we do not emit any stack adjustment operations. When
we go to lower a return, we check if we've already emitted a tail call. If so,
then we skip the return lowering.
For testing, this patch
- Adds call-translator-tail-call.ll to test which tail calls we currently lower,
which ones we don't, and which ones we shouldn't.
- Updates branch-target-enforcement-indirect-calls.ll to show that we fall back
as expected.
Differential Revision: https://reviews.llvm.org/D67189
llvm-svn: 370996
Now that we have the infrastructure to support s128 types as parameters
we can expand these to libcalls.
Differential Revision: https://reviews.llvm.org/D66185
llvm-svn: 370823
On AArch64, s128 types have to be split into s64 GPRs when passed as arguments.
This change adds the generic support in call lowering for dealing with multiple
registers, for incoming and outgoing args.
Support for splitting for return types not yet implemented.
Differential Revision: https://reviews.llvm.org/D66180
llvm-svn: 370822
This pattern, when imported at -O0 adds an extra copy via the SUBREG_TO_REG.
This is because the SUBREG_TO_REG is not eliminated. At all other opt levels,
it is eliminated.
This is a 1% geomean code size savings at -O0 on CTMark.
Differential Revision: https://reviews.llvm.org/D67027
llvm-svn: 370789
Summary:
Adds the following inline asm constraints for SVE:
- w: SVE vector register with full range, Z0 to Z31
- x: Restricted to registers Z0 to Z15 inclusive.
- y: Restricted to registers Z0 to Z7 inclusive.
This change also adds the "z" modifier to interpret a register as an SVE register.
Not all of the bitconvert patterns added by this patch are used, but they have been included here for completeness.
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, rengolin, cameron.mcinally, greened
Reviewed By: sdesmalen
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66302
llvm-svn: 370673
The motivating case for this is a long way from here:
https://bugs.llvm.org/show_bug.cgi?id=43146
...but I think this is where we have to start.
We need to canonicalize/optimize sequences of shift and logic to ease
pattern matching for things like bswap and improve perf in general.
But without the artificial limit of '!LegalTypes' (early combining),
there are a lot of test diffs, and not all are good.
In the minimal tests added for this proposal, x86 should have better
throughput in all cases. AArch64 is neutral for scalar tests because
it can fold shifts into bitwise logic ops.
There are 3 shift opcodes and 3 logic opcodes for a total of 9 possible patterns:
https://rise4fun.com/Alive/VlIhttps://rise4fun.com/Alive/n1mhttps://rise4fun.com/Alive/1Vn
Differential Revision: https://reviews.llvm.org/D67021
llvm-svn: 370617
There were legalizer asserts in aarch64 globalisel (in debug mode) with s128
sext+icmp before r367060 and r366943 landed. These are just a couple reduced
mir and ir regression tests that came from a build where these were encountered.
llvm-svn: 370602
Summary:
MTE allows memory access to bypass tag check iff the address argument
is [SP, #imm]. This change takes advantage of this to demote uses of
tagged addresses to regular FrameIndex operands, reducing register
pressure in large functions.
MO_TAGGED target flag is used to signal that the FrameIndex operand
refers to memory that might be tagged, and needs to be handled with
care. Such operand must be lowered to [SP, #imm] directly, without a
scratch register.
The transformation pass attempts to predict when the offset will be
out of range and disable the optimization.
AArch64RegisterInfo::eliminateFrameIndex has an escape hatch in case
this prediction has been wrong, but it is quite inefficient and should
be avoided.
Reviewers: pcc, vitalybuka, ostannard
Subscribers: mgorny, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66457
llvm-svn: 370490
This teaches GISel to select patterns which fold an extend plus optional shift
into the addressing mode. In particular, adds and subs.
Factor out the arith extended register ComplexPatterns in AArch64InstrFormats.td
and create GISel equivalents.
Add some equivalent functions to the ones in AArch64ISelDAGToDAG:
- `selectArithExtendedRegister`
- `narrowExtendRegIfNeeded`
- `getExtendTypeForInst`
`getExtendTypeForInst` includes the checks for loads and stores. This will be
used for WRO addressing modes in loads + stores.
Teach selectCopy to properly handle subregister copies on the same bank in
order to support `narrowExtendRegIfNeeded`. The extended register must be a
GPR32, so we need to support same-bank subregister copies.
Fix a bug in getSubRegForClass which would cause registers on things like
GPR32common to end up getting ssub. Just change the check to look for FPR32
rather than GPR32.
For tests:
- Add select-arith-extended-reg.mir
- Update addsub_ext.ll to include GlobalISel checks
Differential Revision: https://reviews.llvm.org/D66835
llvm-svn: 370410
AMDGPU uses this for some addressing mode selection patterns. The
analysis run itself doesn't do anything so it seems easier to just
always require this than adding a way to opt in.
llvm-svn: 370388
Add a GISelPredicateCode to the stxr_* PatFrags in AArch64InstrAtomics.td.
This allows us to select these intrinsics.
Differential Revision: https://reviews.llvm.org/D65779
llvm-svn: 370382
Remove manual selection code for this intrinsic and use a GISelPredicateCode
instead.
This allows us to fully select this intrinsic without any tricky custom C++
matching.
Differential Revision: https://reviews.llvm.org/D65780
llvm-svn: 370380
Same thing as D66897, but for ldxr.* instead. Add a GISelPredicateCode to the
ldxr_* definitions, which allows us to import them.
Add select-ldxr-intrin.mir, and update arm64-ldxr-stxr.ll.
Differential Revision: https://reviews.llvm.org/D66898
llvm-svn: 370378
Add a GISelPredicateCode to ldaxr_*. This allows us to import the patterns for
@llvm.aarch64.ldaxr.*, and thus select them.
Add `isLoadStoreOfNumBytes` for the GISelPredicateCode, since each of these
intrinsics involves the same check.
Add select-ldaxr-intrin.mir, and update arm64-ldxr-stxr.ll.
Differential Revision: https://reviews.llvm.org/D66897
llvm-svn: 370377
Amara Emerson