The '#' token is not a comment for all targets (on ARM and AArch64 it marks an
immediate operand), so we shouldn't treat it as such.
Comments are already converted to AsmToken::EndOfStatement by
AsmLexer::LexLineComment, so this check was unnecessary.
Differential Revision: https://reviews.llvm.org/D36405
llvm-svn: 310457
This reverts r310243. Only MVFR2 is actually restricted to v8 and it'll be a
little while before we can get a proper fix together. Better that we allow
incorrect code than reject correct in the meantime.
llvm-svn: 310384
This patch addresses two issues with assembly and disassembly for VMRS/VMSR:
1.currently VMRS/VMSR instructions accessing fpsid, mvfr{0-2} and fpexc, are
accepted for non ARMv8-A targets.
2. all VMRS/VMSR instructions accept writing/reading to PC and SP, when only
ARMv7-A and ARMv8-A should be allowed to write/read to SP and none to PC.
This patch addresses those issues and adds tests for these cases.
Differential Revision: https://reviews.llvm.org/D36306
llvm-svn: 310243
This patch cleans up and fixes issues in the M-Class system register handling:
1. It defines the system registers and the encoding (SYSm values) in one place:
a new ARMSystemRegister.td using SearchableTable, thereby removing the
hand-coded values which existed in multiple places.
2. Some system registers e.g. BASEPRI_MAX_NS which do not exist were being allowed!
Ref: ARMv6/7/8M architecture reference manual.
Reviewed by: @t.p.northover, @olist01, @john.brawn
Differential Revision: https://reviews.llvm.org/D35209
llvm-svn: 308456
The issue is not if the value is pcrel. It is whether we have a
relocation or not.
If we have a relocation, the static linker will select the upper
bits. If we don't have a relocation, we have to do it.
llvm-svn: 307730
For ELF, a movw+movt pair is handled as two separate relocations.
If an offset should be applied to the symbol address, this offset is
stored as an immediate in the instruction (as opposed to stored as an
offset in the relocation itself).
Even though the actual value stored in the movt immediate after linking
is the top half of the value, we need to store the unshifted offset
prior to linking. When the relocation is made during linking, the offset
gets added to the target symbol value, and the upper half of the value
is stored in the instruction.
This makes sure that movw+movt with offset symbols get properly
handled, in case the offset addition in the lower half should be
carried over to the upper half.
This makes the output from the additions to the test case match
the output from GNU binutils.
For COFF and MachO, the movw/movt relocations are handled as a pair,
and the overflow from the lower half gets carried over to the movt,
so they should keep the shifted offset just as before.
Differential Revision: https://reviews.llvm.org/D35242
llvm-svn: 307713
This change allows the pc to be used as a destination register for the
pseudo instruction LDR pc,=expression . The pseudo instruction must not be
transformed into a MOV, but it can use the Thumb2 LDR (literal) instruction
to a constant pool entry. See (A7.7.43 from ARMv7M ARM ARM).
Differential Revision: https://reviews.llvm.org/D34751
llvm-svn: 307640
This implements suggesting other mnemonics when an invalid one is specified,
for example:
$ echo "adXd r1,r2,#3" | llvm-mc -triple arm
<stdin>:1:1: error: invalid instruction, did you mean: add, qadd?
adXd r1,r2,#3
^
The implementation is target agnostic, but as a first step I have added it only
to the ARM backend; so the ARM backend is a good example if someone wants to
enable this too for another target.
Differential Revision: https://reviews.llvm.org/D33128
llvm-svn: 307148
processFixupValue is called on every relaxation iteration. applyFixup
is only called once at the very end. applyFixup is then the correct
place to do last minute changes and value checks.
While here, do proper range checks again for fixup_arm_thumb_bl. We
used to do it, but dropped because of thumb2. We now do it again, but
use the thumb2 range.
llvm-svn: 306177
Summary:
The ARM ELF ABI requires the linker to do interworking for wide
conditional branches from Thumb code to ARM code.
That was pointed out by @peter.smith in the comments for D33436.
Reviewers: rafael, peter.smith, echristo
Reviewed By: peter.smith
Subscribers: aemerson, javed.absar, kristof.beyls, llvm-commits, peter.smith
Differential Revision: https://reviews.llvm.org/D34447
llvm-svn: 306009
Summary:
Relocations are required for unconditional branches to function symbols with
different execution mode. Without this patch, incorrect branches are
generated for tail calls between functions with different execution
mode.
Reviewers: peter.smith, rafael, echristo, kristof.beyls
Reviewed By: peter.smith
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33898
llvm-svn: 304882
This change adds a new fixup fixup_t2_so_imm for the t2_so_imm_asmoperand
"T2SOImm". The fixup permits code such as:
.L1:
sub r3, r3, #.L2 - .L1
.L2:
to assemble in Thumb2 as well as in ARM state.
The operand predicate isT2SOImm() explicitly doesn't match expressions
containing :upper16: and :lower16: as expressions with these operators
must match the movt and movw instructions.
The test mov r0, foo2 in thumb2-diagnostics is moved to a new file as the
fixup delays the error message till after the assembler has quit due to
the other errors.
As the mov instruction shares the t2_so_imm_asmoperand mov instructions
with a non constant expression now match t2MOVi rather than t2MOVi16 so the
error message is slightly different.
Fixes PR28647
Differential Revision: https://reviews.llvm.org/D33492
llvm-svn: 304702
Summary:
Without using a fixup in this case, BL will be used instead of BLX to
call internal ARM functions from Thumb functions.
Reviewers: rafael, t.p.northover, peter.smith, kristof.beyls
Reviewed By: peter.smith
Subscribers: srhines, echristo, aemerson, rengolin, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D33436
llvm-svn: 304413
Re-applying now that PR32825 which was raised on the commit this fixed up is now known to have also been fixed by this commit.
Original commit message:
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 303540
Re-applying now that the open bug on this commit, PR32825, is known to be fixed.
Original commit message:
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 303539
This reverts commit r302416. This was a fixup for r286006, which has now been reverted so this doesn't apply (either in concept or in code).
This commit itself has no problems, but the underlying issue it was fixing has now disappeared from the codebase.
llvm-svn: 303536
Multiple ldr pseudoinstructions with the same constant value will
reuse the same constant pool entry. However, if the constant pool
is explicitly flushed with a .ltorg directive, we should not try
to reference constants in the previous pool any longer, since they
may be out of range.
This fixes assembling hand-written assembler source which repeatedly
loads the same constant value, across a binary size larger than the
pc-relative fixup range for ldr instructions (4096 bytes). Such
assembler source already uses explicit .ltorg instructions to emit
constant pools with regular intervals. However if we try to reuse
constants emitted in earlier pools, they end up out of range.
This makes the output of the testcase match what binutils gas does
(prior to this patch, it would fail to assemble).
Differential Revision: https://reviews.llvm.org/D32847
llvm-svn: 302416
Recently support was added for substituting one intruction for another by
negating or inverting the immediate, but ORR and ORN were missed so this patch
adds them.
This one is slightly different to the others in that ORN only exists in thumb,
so we only do the substitution in thumb.
Differential Revision: https://reviews.llvm.org/D32534
llvm-svn: 302224
ChangeSection incorrectly registers LastEMSInfo as belonging to the previous
section, not the current section. This happens to work when changing sections
using .section, as the previous section is set to the current section before
the call to ChangeSection, but not when using .popsection.
Differential Revision: https://reviews.llvm.org/D32225
llvm-svn: 300831
In the assembler, we should emit build attributes based on the target
selected with command-line options. This matches the GNU assembler's
behaviour. We only do this for build attributes which describe the
hardware that is expected to be available, not the ones that describe
ABI compatibility.
This is done by moving some of the attribute emission code to
ARMTargetStreamer, so that it can be shared between the assembly and
code-generation code paths. Since the assembler only creates a
MCSubtargetInfo, not an ARMSubtarget, the code had to be changed to
check raw features, and not use the convenience functions in
ARMSubtarget.
If different attributes are later specified using the .eabi_attribute
directive, then they will take precedence, as happens when the same
.eabi_attribute is specified twice.
This must be enabled by an option, because we don't want to do this when
parsing inline assembly. The attributes would match the ones emitted at
the start of the file, so wouldn't actually change the emitted object
file, but the extra directives would be added to every inline assembly
block when emitting assembly, which we'd like to avoid.
The majority of the changes in the build-attributes.ll test are just
re-ordering the directives, because the hardware attributes are now
emitted before the ABI ones. However, I did fix one bug which I spotted:
Tag_CPU_arch_profile was not being emitted for v6M.
Differential revision: https://reviews.llvm.org/D31812
llvm-svn: 300547
A number of backends (AArch64, MIPS, ARM) have been using
MCContext::reportError to report issues such as out-of-range fixup values in
their TgtAsmBackend. This is great, but because MCContext couldn't easily be
threaded through to the adjustFixupValue helper function from its usual
callsite (applyFixup), these backends ended up adding an MCContext* argument
and adding another call to applyFixup to processFixupValue. Adding an
MCContext parameter to applyFixup makes this unnecessary, and even better -
applyFixup can take a reference to MCContext rather than a potentially null
pointer.
Differential Revision: https://reviews.llvm.org/D30264
llvm-svn: 299529
Dont emit Mapping symbols for sections that contain only data.
Summary:
Dont emit mapping symbols for sections that contain only data.
Reviewers: rengolin, weimingz, kparzysz, t.p.northover, peter.smith
Reviewed By: t.p.northover
Patched by Shankar Easwaran <shankare@codeaurora.org>
Subscribers: alekseyshl, t.p.northover, llvm-commits
Differential Revision: https://reviews.llvm.org/D30724
llvm-svn: 299392
- we are now using immediate AsmOperands so that the range check functions are
tablegen'ed.
- Big bonus is that error messages become much more accurate, i.e. instead of a
useless "invalid operand" error message it will not say that the immediate
operand must in range [x,y], which is why regression tests needed updating.
More tablegen operand descriptions could probably benefit from using
immediateAsmOperand, but this is a first good step to get rid of most of the
nearly identical range check functions. I will address the remaining immediate
operands in next clean ups.
Differential Revision: https://reviews.llvm.org/D31333
llvm-svn: 299358
Summary:
To support negative immediates for certain arithmetic instructions, the
instruction is converted to the inverse instruction with a negated (or inverted)
immediate. For example, "ADD r0, r1, #FFFFFFFF" cannot be encoded as an ADD
instruction. However, "SUB r0, r1, #1" is equivalent.
These conversions are different from instruction aliases. An alias maps
several assembler instructions onto one encoding. A conversion, however, maps
an *invalid* instruction--e.g. with an immediate that cannot be represented in
the encoding--to a different (but equivalent) instruction.
Several instructions with negative immediates were being converted already, but
this was not systematically tested, nor did it cover all instructions.
This patch implements all possible substitutions for ARM, Thumb1 and
Thumb2 assembler and adds tests. It also adds a feature flag
(-mattr=+no-neg-immediates) to turn these substitutions off. This is
helpful for users who want their code to assemble to exactly what they
wrote.
Reviewers: t.p.northover, rovka, samparker, javed.absar, peter.smith, rengolin
Reviewed By: javed.absar
Subscribers: aadg, aemerson, llvm-commits
Differential Revision: https://reviews.llvm.org/D30571
llvm-svn: 298380
Fixing triple format in the tests added for the branch label fix for Thumb
Targets. Also recommitting previously approved patch, see
https://reviews.llvm.org/D30943.
Reviewed by: samparker
Differential Revision: https://reviews.llvm.org/D30987
llvm-svn: 298056
Different MCInstrAnalysis classes for arm and thumb mode, each with
their own evaluateBranch implementation. I added a test case and
fixed the coff-relocations test to use '<label>:' rather than
'<label>' in the CHECK-LABEL entries, since the ones without the
colon would match branch targets. Might be worth noticing that
llvm-objdump does not lookup the relocation and thus assigns it a
target depending on the encoded immediate which #0, so it thinks it
branches to the next instruction.
Committed on behalf of Andre Vieira (avieira).
Differential Revision: https://reviews.llvm.org/D30943
llvm-svn: 297821
This instruction was missing from the list of opcodes that we check, so we were
hitting an llvm_unreachable in ARMMCCodeEmitter.cpp for the ARM MOVT
instruction, rather than the diagnostic that is emitted for the other MOVW/MOVT
instructions.
Differential revision: https://reviews.llvm.org/D30936
llvm-svn: 297739
Summary:
This is a continuation of D28861. Add an SMLoc to MCUnaryExpr such that
a better diagnostic can be given in case of an error in later stages of
assembling.
Reviewers: rengolin, grosbach, javed.absar, olista01
Reviewed By: olista01
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D30581
llvm-svn: 297454
I previously removed the T2XtPk feature from the ARM backend, but it
looks like I missed some of the tests that were using the feature.
Differential Revision: https://reviews.llvm.org/D30778
llvm-svn: 297386
Minor cleanup in ARMInstrVFP.td: removed some FIXMEs and added a MC test for
vcmp that was actually missing.
Differential Revision: https://reviews.llvm.org/D30745
llvm-svn: 297376
On Windows stderr and stdout happen to get interleaved in a way that causes the
test to fail, so split it up into a test that checks for errors and a test that
doesn't.
llvm-svn: 297273
The check for LSL #0 in an IT block was checking if operand 4 was zero, but
operand 4 is the condition code operand so it was actually checking for LSLEQ.
Fix this by checking operand 3, which really is the immediate operand, and add
some tests.
Differential Revision: https://reviews.llvm.org/D30692
llvm-svn: 297142
This parsing code was incorrectly checking for invalid characters, so an
invalid instruction like:
msr spsr_w, r0
would be emitted as:
msr spsr_cxsf, r0
Differential revision: https://reviews.llvm.org/D30462
llvm-svn: 296607
This is for running the assembler with -g (to emit DWARF describing
the assembler source).
Differential Revision: http://reviews.llvm.org/D30475
llvm-svn: 296541
Summary:
clang adds !srcloc metadata to inline assembly in LLVM bitcode generated
for inline assembly in C. The value of this !srcloc is passed to the
diagnostics handler if the inline assembly generates a diagnostic.
clang is able to turn this cookie back to a location in the C source
file.
To test this functionality without a dependency, make llc print the
!srcloc metadata if it is present. The added test uses this mechanism
to test that the correct !srclocs are passed to the diag handler.
Reviewers: rengolin, rnk, echristo, grosbach, mehdi_amini
Reviewed By: mehdi_amini
Subscribers: mehdi_amini, llvm-commits
Differential Revision: https://reviews.llvm.org/D30167
llvm-svn: 296465
In Thumb2, instructions which write to the PC are UNPREDICTABLE if they are in
an IT block but not the last instruction in the block.
Previously, we only diagnosed this for LDM instructions, this patch extends the
diagnostic to cover all of the relevant instructions.
Differential Revision: https://reviews.llvm.org/D30398
llvm-svn: 296459
Currently we handle this correctly in arm, but in thumb we don't which leads to
an unpredictable instruction being emitted for LSL #0 in an IT block and SP not
being permitted in some cases when it should be.
For the thumb2 LSL we can handle this by making LSL #0 an alias of MOV in the
.td file, but for thumb1 we need to handle it in checkTargetMatchPredicate to
get the IT handling right. We also need to adjust the handling of
MOV rd, rn, LSL #0 to avoid generating the 16-bit encoding in an IT block. We
should also adjust it to allow SP in the same way that it is allowed in
MOV rd, rn, but I haven't done that here because it looks like it would take
quite a lot of work to get right.
Additionally correct the selection of the 16-bit shift instructions in
processInstruction, where it was checking if the two registers were equal when
it should have been checking if they were low. It appears that previously this
code was never executed and the 16-bit encoding was selected by default, but
the other changes I've done here have somehow made it start being used.
Differential Revision: https://reviews.llvm.org/D30294
llvm-svn: 296342
The Requires class overrides the target requirements of an instruction,
rather than adding to them, so all ARM instructions need to include the
IsARM predicate when they have overwitten requirements.
This caused the swp and swpb instructions to be allowed in thumb mode
assembly, and the ARM encoding of CDP to be selected in codegen (which
is different for conditional instructions).
Differential Revision: https://reviews.llvm.org/D29283
llvm-svn: 293634
Add a SMLoc to MCExpr. Most code does not generate or consume the SMLoc (yet).
Patch by Sanne Wouda <sanne.wouda@arm.com>!
Differential Revision: https://reviews.llvm.org/D28861
llvm-svn: 292515
If F is a Thumb function symbol, and G = F + const, and G is a
function symbol, then G is Thumb. Because what else could it be?
Differential Revision: https://reviews.llvm.org/D28878
llvm-svn: 292514
A 64-bit relocation does not exist in 32-bit ARMELF. Report an error
instead of crashing.
PR23870
Patch by Sanne Wouda (sanwou01).
Differential Revision: https://reviews.llvm.org/D28851
llvm-svn: 292373
Currently, the error messages we emit for the .org directive when the
expression is not absolute or is out of range do not include the line
number of the directive, so it can be hard to track down the problem if
a file contains many .org directives.
This patch stores the source location in the MCOrgFragment, so that it
can be used for diagnostics emitted during layout.
Since layout is an iterative process, and the errors are detected during
each iteration, it would have been possible for errors to be reported
multiple times. To prevent this, I've made the assembler bail out after
each iteration if any errors have been reported. This will still allow
multiple unrelated errors to be reported in the common case where they
are all detected in the first round of layout.
Differential Revision: https://reviews.llvm.org/D27411
llvm-svn: 289643
When we see a non flag-setting instruction for which only the flag-setting
version is available in Thumb1, we should give a better error message than
"invalid instruction".
Differential Revision: https://reviews.llvm.org/D27414
llvm-svn: 288805
We would attempt to access the symbol section without ensuring that the symbol
was not absolute. When the assembler referenced relocation is not evaluated to
the absolute, but when we record the relocation, we would query the section.
Because the symbol is absolute, it does not have a section associated with it,
triggering an assertion. Just be more careful about the access of the section.
Addresses PR31064!
llvm-svn: 287619
The version of this instruction with the .w suffix already correctly accepts
this, but the alias without the .w did not.
Differential Revision: https://reviews.llvm.org/D26499
llvm-svn: 286446
Summary: This patch returns the same label if the CP entry with the same value has been created.
Reviewers: eli.friedman, rengolin, jmolloy
Subscribers: majnemer, jmolloy, llvm-commits
Differential Revision: https://reviews.llvm.org/D25804
llvm-svn: 286006
CodeView has an S_COMPILE3 record to identify the compiler and source language of the compiland. This record comes first in the debug$S section for the compiland. The debuggers rely on this record to know the source language of the code.
There was a little test fallout from introducing a new record into the symbols subsection.
Differential Revision: https://reviews.llvm.org/D24317
llvm-svn: 281990
The initial mapping symbol state is set from the triple, but we only checked
for the little-endian thumb triple, so could end up with an ARM mapping symbol
for big-endian thumb.
Differential Revision: https://reviews.llvm.org/D24553
llvm-svn: 281894
The changes made in r269352, r269353 and r269354 to support the
transformation of the ldr rd,=immediate to mov introduced a regression
from 3.8 (ldr.w rd, =immediate) not supported.
This change puts support back in for ldr.w by means of a t2InstAlias for
the .w form. The .w is ignored in ARM state and propagated to the ldr in
Thumb2.
llvm-svn: 281319
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280364
This was a real restriction in the original version of SinkIfThenCodeToEnd. Now it's been rewritten, the restriction can be lifted.
As part of this, we handle a very common and useful case where one of the incoming branches is actually conditional. Consider:
if (a)
x(1);
else if (b)
x(2);
This produces the following CFG:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ | /
[ end ]
[end] has two unconditional predecessor arcs and one conditional. The conditional refers to the implicit empty 'else' arc. This same pattern can also be caused by an empty default block in a switch.
We can't sink the call to x() down to end because no call to x() happens on the third incoming arc (assume that x() has sideeffects for the sake of argument; if something is safe to speculate we could indeed sink nevertheless but this cannot happen in the general case and causes many extra selects).
We are now able to detect this case and split off the unconditional arcs to a common successor:
[if]
/ \
[x(1)] [if]
| | \
| | \
| [x(2)] |
\ / |
[sink.split] |
\ /
[ end ]
Now we can sink the call to x() into %sink.split. This can cause significant code simplification in many testcases.
llvm-svn: 280217
Its existence is largely historical, apparently we tried to make ARM object
files look maybe-almost-possibly runnable by putting our best guess at the
actual value into relocated locations. Of course, the real linker then comes
along and can completely change things.
But it should only be there for word-sized and movw/movt relocations. It can't
be encoded in branch relocations, and I've seen it mess up validity
calculations twice in the last couple of weeks so the default is clearly problematic.
llvm-svn: 279773
A branch-distance to a Thumb function shouldn't be forced to be odd for
CBZ/CBNZ instructions because (assuming it's within range), it's going to be a
valid, even offset.
llvm-svn: 279665
Summary:
Fix for the upper bound check that was causing a build failure.
Reviewers: olista01, rengolin, t.p.northover
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23501
llvm-svn: 278789
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278788
This currently breaks the greendragon clang-stage1-configure-RA/ and
brotli. It is probably just uncovering a pre-existing problem. Reverting
temporarily to get the buildbots green again. A reduced testcase will
follow shortly.
This reverts commit r278659.
llvm-svn: 278711
Summary:
The assembler currently does not check the branch target for CBZ/CBNZ
instructions, which only permit branching forwards with a positive offset. This
adds validation for the branch target to ensure negative PC-relative offsets are
not encoded into the instruction, whether specified as a literal or as an
assembler symbol.
Reviewers: rengolin, t.p.northover
Subscribers: llvm-commits, rengolin
Differential Revision: https://reviews.llvm.org/D23312
llvm-svn: 278659
Attempt 2: Retryign after Tsan.mman test fix.
Attempt 1: Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277501
Recommitting after fixing test.
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277459
Summary:
When parsing assembly where the line comment syntax is not hash, the
lexer cannot distinguish between hash's that start a hash line comment
and one that is part of an assembly statement and must be distinguished
during parsing. Previously, this was incompletely handled by not checking
for EndOfStatement at the end of statements and interpreting hash
prefixed statements as comments.
Change EndOfStatement Parsing to check for Hash comments and reintroduce
Hash statement parsing to catch previously handled cases.
Reviewers: rnk, majnemer
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D23017
llvm-svn: 277407
Currently, for ARMCOFFMCAsmInfoMicrosoft, no comment character is set, thus the
idefault, '#', is used.
The hash character doesn't work as comment character in ARM assembly, since '#'
is used for immediate values.
The comment character is set to ';', which is the comment character used by MS
armasm.exe. (The microsoft armasm.exe uses a different directive syntax than
what LLVM currently supports though, similar to ARM's armasm.)
This allows inline assembly with immediate constants to be built (and brings the
assembly output from clang -S closer to being possible to assemble).
A test is added that verifies that ';' is correctly interpreted as comments in
this mode, and verifies that assembling code that includes literal constants
with a '#' works.
Patch by Martin Storsjö.
llvm-svn: 276859
The encoding of expressions as immediates wasn't correct, and was reported in
PR23000. However, we have done some refactoring on how immediates are handled
and now it seems the problem is fixed. This is a test just to make sure it
won't regress again.
llvm-svn: 276858
- More informative message when extension name is not an identifier token.
- Stop parsing directive if extension is unknown (avoid duplicate error
messages).
- Report unsupported extensions with a source location, rather than
report_fatal_error.
Differential Revision: https://reviews.llvm.org/D22806
llvm-svn: 276748
This option, compatible with gas's -mimplicit-it, controls the
generation/checking of implicit IT blocks in ARM/Thumb assembly.
This option allows two behaviours that were not possible before:
- When in ARM mode, emit a warning when assembling a conditional
instruction that is not in an IT block. This is enabled with
-mimplicit-it=never and -mimplicit-it=thumb.
- When in Thumb mode, automatically generate IT instructions when an
instruction with a condition code appears outside of an IT block. This
is enabled with -mimplicit-it=thumb and -mimplicit-it=always.
The default option is -mimplicit-it=arm, which matches the existing
behaviour (allow conditional ARM instructions outside IT blocks without
warning, and error if a conditional Thumb instruction is outside an IT
block).
The general strategy for generating IT blocks in Thumb mode is to keep a
small list of instructions which should be in the IT block, and only
emit them when we encounter something in the input which means we cannot
continue the block. This could be caused by:
- A non-predicable instruction
- An instruction with a condition not compatible with the IT block
- The IT block already contains 4 instructions
- A branch-like instruction (including ALU instructions with the PC as
the destination), which cannot appear in the middle of an IT block
- A label (branching into an IT block is not legal)
- A change of section, architecture, ISA, etc
- The end of the assembly file.
Some of these, such as change of section and end of file, are parsed
outside of the ARM asm parser, so I've added a new virtual function to
AsmParser to ensure any previously-parsed instructions have been
emitted. The ARM implementation of this flushes the currently pending IT
block.
We now have to try instruction matching up to 3 times, because we cannot
know if the current IT block is valid before matching, and instruction
matching changes depending on the IT block state (due to the 16-bit ALU
instructions, which set the flags iff not in an IT block). In the common
case of not having an open implicit IT block and the instruction being
matched not needing one, we still only have to run the matcher once.
I've removed the ITState.FirstCond variable, because it does not store
any information that isn't already represented by CurPosition. I've also
updated the comment on CurPosition to accurately describe it's meaning
(which this patch doesn't change).
Differential Revision: https://reviews.llvm.org/D22760
llvm-svn: 276747
There's not much functional change, but it really is an architectural feature
(on v6T2, v7A, v7R and v7EM) rather than something each CPU implements
individually.
The main functional change is the default behaviour you get when specifying
only "-triple".
llvm-svn: 276013
The standard local dynamic model for TLS on ARM systems needs two
relocations:
- R_ARM_TLS_LDM32 (module idx)
- R_ARM_TLS_LDO32 (offset of object from origin of module TLS block)
In GNU style assembler we use symbol(tlsldm) and symbol(tlsldo) to
produce these relocations.
llvm-mc for ARM supports symbol(tlsldo) but does not support symbol(tlsldm).
This patch wires up the existing symbol(tlsldm) to R_ARM_TLS_LDM32.
TLS for ARM is defined in Addenda to, and Errata in, the ABI for the
ARM Architecture
Differential Revision: https://reviews.llvm.org/D22461
llvm-svn: 275977
Immediate branch targets aren't commonly used, but if they are we should make
sure they can actually be encoded. This means they must be divisible by 2 when
targeting Thumb mode, and by 4 when targeting ARM mode.
Also do a little naming cleanup while I was changing everything around anyway.
llvm-svn: 275116
These instructions end in "S" but are not flag-setting, so they need including
in the list of special cases in the assembly parser.
Differential Revision: http://reviews.llvm.org/D21077
llvm-svn: 272015
The Thumb2 conditional branch B<cond>.W has a different encoding (T3)
to the unconditional branch B.W (T4) as it needs to record <cond>.
As the encoding is different the B<cond>.W is given a different
relocation type.
ELF for the ARM Architecture 4.6.1.6 (Table-13) states that
R_ARM_THM_JUMP19 should be used for B<cond>.W. At present the
MC layer is using the R_ARM_THM_JUMP24 from B.W.
This change makes B<cond>.W use R_ARM_THM_JUMP19 and alters the
existing test that checks for R_ARM_THM_JUMP24 to expect
R_ARM_THM_JUMP19.
llvm-svn: 271997
new instruction to ARM and AArch64 targets and several system registers.
Patch by: Roger Ferrer Ibanez and Oliver Stannard
Differential Revision: http://reviews.llvm.org/D20282
llvm-svn: 271670
The movw instruction is only available in ARM state for V6T2 and above.
The MOVi16 instruction has requirement HasV6T2 but the InstAlias
for mov rd, imm where the operand is imm0_65535_expr:$imm does not.
This means that movw can incorrectly be used in ARMv4 and ARMv5 by
writing mov rd, 0x1234. The simple fix is to the requirement HasV6T2
to the InstAlias. Tests added to not-armv4.s.
Patch by Peter Smith.
llvm-svn: 269761
This change implements the transformation in processInstruction() for the
LDR rt, =expression to MOV rt, expression when the expression can be evaluated
and can fit into the immediate field of the MOV or a MVN.
Across the ARM and Thumb instruction sets there are several cases to consider,
each with a different range of representatble constants.
In ARM we have:
* Modified immediate (All ARM architectures)
* MOVW (v6t2 and above)
In Thumb we have:
* Modified immediate (v6t2, v7m and v8m.mainline)
* MOVW (v6t2, v7m, v8.mainline and v8m.baseline)
* Narrow Thumb MOV that can be used in an IT block (non flag-setting)
If the immediate fits any of the available alternatives then we make the transformation.
Fixes 25722.
Patch by Peter Smith.
llvm-svn: 269354
Alter instances in the test-suite that use immediates that can be represented
in the immediate field of a MOV. The reason for doing this is that when the
LDR rt,=imm transformation to MOV rt, imm the existing tests do not need to
be modified.
Required by the patch that fixes PR25722.
Patch by Peter Smith.
llvm-svn: 269353
Currently each Function points to a DISubprogram and DISubprogram has a
scope field. For member functions the scope is a DICompositeType. DIScopes
point to the DICompileUnit to facilitate type uniquing.
Distinct DISubprograms (with isDefinition: true) are not part of the type
hierarchy and cannot be uniqued. This change removes the subprograms
list from DICompileUnit and instead adds a pointer to the owning compile
unit to distinct DISubprograms. This would make it easy for ThinLTO to
strip unneeded DISubprograms and their transitively referenced debug info.
Motivation
----------
Materializing DISubprograms is currently the most expensive operation when
doing a ThinLTO build of clang.
We want the DISubprogram to be stored in a separate Bitcode block (or the
same block as the function body) so we can avoid having to expensively
deserialize all DISubprograms together with the global metadata. If a
function has been inlined into another subprogram we need to store a
reference the block containing the inlined subprogram.
Attached to https://llvm.org/bugs/show_bug.cgi?id=27284 is a python script
that updates LLVM IR testcases to the new format.
http://reviews.llvm.org/D19034
<rdar://problem/25256815>
llvm-svn: 266446
Before, ELF at least managed a diagnostic but it was a completely untraceable
"undefined symbol" error. MachO had a variety of even worse behaviours: crash,
emit corrupt file, or an equally bad message.
llvm-svn: 265984
When we see a .arch or .cpu directive, we should try to avoid switching
ARM/Thumb mode if possible.
If we do have to switch modes, we also need to emit the correct mapping
symbol for the new ISA. We did not do this previously, so could emit
ARM code with Thumb mapping symbols (or vice-versa).
The GAS behaviour is to always stay in the same mode, and to emit an
error on any instructions seen when the current mode is not available on
the current target. We can't represent that situation easily (we assume
that Thumb mode is available if ModeThumb is set), so we differ from the
GAS behaviour when switching to a target that can't support the old
mode. I've added a warning for when this implicit mode-switch occurs.
Differential Revision: http://reviews.llvm.org/D18955
llvm-svn: 265936
Some ARM instructions encode 32-bit immediates as a 8-bit integer (0-255)
and a 4-bit rotation (0-30, even) in its least significant 12 bits. The
original fixup, FK_Data_4, patches the instruction by the value bit-to-bit,
regardless of the encoding. For example, assuming the label L1 and L2 are
0x0 and 0x104 respectively, the following instruction:
add r0, r0, #(L2 - L1) ; expects 0x104, i.e., 260
would be assembled to the following, which adds 1 to r0, instead of 260:
e2800104 add r0, r0, #4, 2 ; equivalently 1
The new fixup kind fixup_arm_mod_imm takes care of the encoding:
e2800f41 add r0, r0, #260
Patch by Ting-Yuan Huang!
llvm-svn: 265122
We were emitting only one half of a the paired relocations needed for these
instructions because we decided that an offset needed a scattered relocation.
In fact, movw/movt relocations can be paired without being scattered.
llvm-svn: 261679
This patch was originally committed as r257885, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258683
This patch was originally committed as r257884, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258682
This patch was originally committed as r257883, but was reverted due to windows
failures. The cause of these failures has been fixed under r258677, hence
re-committing the original patch.
llvm-svn: 258681
This was originally committed as r255762, but reverted as it broke windows
bots. Re-commitiing the exact same patch, as the underlying cause was fixed by
r258677.
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 258678
When a symbol S shows up in an expression in assembly there are two
possible interpretations
* The expression is referring to the value of S in this file.
* The expression is referring to the value after symbol resolution.
In the first case the assembler can reason about the value and try to
produce a relocation.
In the second case, that is only possible if the symbol cannot be
preempted.
Assemblers are not very consistent about which interpretation gets used.
This changes MC to agree with GAS in the case of an expression of the
form "Sym - WeakSym".
llvm-svn: 258329
When the shift immediate is zero, PKHTB is an alias for PKHBT, but the order of
the input operands needs to be swapped.
Differential Revision: http://reviews.llvm.org/D16288
llvm-svn: 258044
# The first commit's message is:
Revert "[ARM] Add DSP build attribute and extension targeting"
This reverts commit b11cc50c0b4a7c8cdb628abc50b7dc226ff583dc.
# This is the 2nd commit message:
Revert "[ARM] Add new system registers to ARMv8-M Baseline/Mainline"
This reverts commit 837d08454e3e5beb8581951ac26b22fa07df3cd5.
llvm-svn: 257916
Summary:
This fixes three bugs, in all of which state is not or incorrecly reset between
objects (i.e. when reusing the same pass manager to create multiple object
files):
1) AttributeSection needs to be reset to nullptr, because otherwise the backend
will try to emit into the old object file's attribute section causing a
segmentation fault.
2) MappingSymbolCounter needs to be reset, otherwise the second object file
will start where the first one left off.
3) The MCStreamer base class resets the Streamer's e_flags settings. Since
EF_ARM_EABI_VER5 is set on streamer creation, we need to set it again
after the MCStreamer was rest.
Also rename Reset (uppser case) to EHReset to avoid confusion with
reset (lower case).
Reviewers: rengolin
Differential Revision: http://reviews.llvm.org/D15950
llvm-svn: 257473
Summary:
There are a number of files in the tree which have been accidentally checked in with DOS line endings. Convert these to native line endings.
There are also a few files which have DOS line endings on purpose, and I have set the svn:eol-style property to 'CRLF' on those.
Reviewers: joerg, aaron.ballman
Subscribers: aaron.ballman, sanjoy, dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D15848
llvm-svn: 256707
MCDwarf emits a canned abbreviation table, but was not emitting proper
forms for DWARF version 4, which is the default after r249655.
Differential Revision: http://reviews.llvm.org/D15732
llvm-svn: 256313
Today, we always take into account the possibility that object files
produced by MC may be consumed by an incremental linker. This results
in us initialing fields which vary with time (TimeDateStamp) which harms
hermetic builds (e.g. verifying a self-host went well) and produces
sub-optimal code because we cannot assume anything about the relative
position of functions within a section (call sites can get redirected
through incremental linker thunks).
Let's provide an MCTargetOption which controls this behavior so that we
can disable this functionality if we know a-priori that the build will
not rely on /incremental.
llvm-svn: 256203
These days relocations are created and stored in a deterministic way.
The order they are created is also suitable for the .o file, so we don't
need an explicit sort.
The last remaining exception is MIPS.
llvm-svn: 255902
ARMv8.2-A adds 16-bit floating point versions of all existing SIMD
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
Note that VFP without SIMD is not a valid combination for any version of
ARMv8-A, but I have ensured that these instructions all depend on both
FeatureNEON and FeatureFullFP16 for consistency.
Differential Revision: http://reviews.llvm.org/D15039
llvm-svn: 255764
ARMv8.2-A adds 16-bit floating point versions of all existing VFP
floating-point instructions. This is an optional extension, so all of
these instructions require the FeatureFullFP16 subtarget feature.
The assembly for these instructions uses S registers (AArch32 does not
have H registers), but the instructions have ".f16" type specifiers
rather than ".f32" or ".f64". The top 16 bits of each source register
are ignored, and the top 16 bits of the destination register are set to
zero.
These instructions are mostly the same as the 32- and 64-bit versions,
but they use coprocessor 9 rather than 10 and 11.
Two new instructions, VMOVX and VINS, have been added to allow packing
and extracting two 16-bit floats stored in the top and bottom halves of
an S register.
New fixup kinds have been added for the PC-relative load and store
instructions, but no ELF relocations have been added as they have a
range of 512 bytes.
Differential Revision: http://reviews.llvm.org/D15038
llvm-svn: 255762
AND/BIC instructions do accept SP/PC, so the register class should be
more generic (rGPR -> GPR) to cope with that case. Adding more tests.
llvm-svn: 255034
Summary: This reverts r254234, and adds a simple fix for the annoying case of use-after-free.
Reviewers: rengolin
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D15236
llvm-svn: 254912
Add ARMv8.2-A to TargetParser, so that it can be used by the clang
command-line options and the .arch directive.
Most testing of this will be done in clang, checking that the
command-line options that this enables work.
Differential Revision: http://reviews.llvm.org/D15037
llvm-svn: 254400
Summary:
Since this build attribute corresponds to a whole module, and
different functions in a module may differ in the optimizations
enabled for them, this attribute is emitted after all functions,
and only in the case that the optimization goals for all
functions match.
Reviewers: logan, hans
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14934
llvm-svn: 254201
Summary:
This follows D14577 to treat ARMv6-J as an alias for ARMv6,
instead of an architecture in its own right.
The functional change is that the default CPU when targeting ARMv6-J
changes from arm1136j-s to arm1136jf-s, which is currently used as
the default CPU for ARMv6; both are, in fact, ARMv6-J CPUs.
The J-bit (Jazelle support) is irrelevant to LLVM, and it doesn't
affect code generation, attributes, optimizations, or anything else,
apart from selecting the default CPU.
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14755
llvm-svn: 253675
Currently, if the assembler encounters an error after parsing (such as an
out-of-range fixup), it reports this as a fatal error, and so stops after the
first error. However, for most of these there is an obvious way to recover
after emitting the error, such as emitting the fixup with a value of zero. This
means that we can report on all of the errors in a file, not just the first
one. MCContext::reportError records the fact that an error was encountered, so
we won't actually emit an object file with the incorrect contents.
Differential Revision: http://reviews.llvm.org/D14717
llvm-svn: 253328
Storing the source location of the expression that created a constant pool
entry allows us to emit better error messages if we later discover that the
expression cannot be represented by a relocation.
Differential Revision: http://reviews.llvm.org/D14646
llvm-svn: 253220
The MCValue class can store a SMLoc to allow better error messages to be
emitted if an error is detected after parsing. The ARM and AArch64 assembly
parsers were not setting this, so error messages did not have source
information.
Differential Revision: http://reviews.llvm.org/D14645
llvm-svn: 253219
Summary:
* ARMv6KZ is the "canonical" name, given in the ARMARM
* ARMv6Z is an "official abbreviation" for it, mentioned in the ARMARM
* ARMv6ZK is a popular misspelling, which we should support as an alias.
The patch corrects the handling of the names.
Functional changes:
* ARMv6Z no longer treated as an architecture in its own right
* ARMv6ZK renamed to ARMv6KZ, accepting ARMv6ZK as an alias
* arm1176jz-s and arm1176jzf-s recognized as ARMv6ZK, instead of ARMv6K
* default ARMv6K CPU changed to arm1176j-s
Reviewers: rengolin, logan, compnerd
Subscribers: aemerson, llvm-commits, rengolin
Differential Revision: http://reviews.llvm.org/D14568
llvm-svn: 253206
Previously, subprograms contained a metadata reference to the function they
described. Because most clients need to get or set a subprogram for a given
function rather than the other way around, this created unneeded inefficiency.
For example, many passes needed to call the function llvm::makeSubprogramMap()
to build a mapping from functions to subprograms, and the IR linker needed to
fix up function references in a way that caused quadratic complexity in the IR
linking phase of LTO.
This change reverses the direction of the edge by storing the subprogram as
function-level metadata and removing DISubprogram's function field.
Since this is an IR change, a bitcode upgrade has been provided.
Fixes PR23367. An upgrade script for textual IR for out-of-tree clients is
attached to the PR.
Differential Revision: http://reviews.llvm.org/D14265
llvm-svn: 252219
The generic infrastructure already did a lot of work to decide if the
fixup value is know or not. It doesn't make sense to reimplement a very
basic case: same fragment.
llvm-svn: 252090
Summary:
ARMv6KZ cores were set up incorrectly in ARM.td; also, the SMI mnemonic
(the old name for SMC, as defined in ARMv6KZ) wasn't supported.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14154
llvm-svn: 251627
Summary:
This patch handles assembly and disassembly, but not codegen, as of yet.
Additionally, it fixes a bug whereby SP and PC as shifted-reg operands
were treated as predictable in ARMv7 Thumb; and it enables the tests
for invalid and unpredictable instructions to run on both ARMv7 and ARMv8.
Reviewers: jmolloy, rengolin
Subscribers: aemerson, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D14141
llvm-svn: 251516
We previously stopped producing Thumb2 relaxations when they weren't supported,
but only diagnosed the case where an actual relocation was produced. We should
also tell people if local symbols aren't going to work rather than silently
overflowing.
llvm-svn: 249164
As Richard Barton observed at http://reviews.llvm.org/D12937#inline-107121
TargetParser in LLVM has insufficient support for ARMv6Z and ARMv6ZK.
In particular, there were no tests for TrustZone being supported in these
architectures.
The patch clears a FIXME: left by Saleem Abdulrasool in r201471, and fixes
his test case which hadn't really been testing what it was claiming to test.
Differential Revision: http://reviews.llvm.org/D13236
llvm-svn: 248921
As a follow-up to r246098, require `DISubprogram` definitions
(`isDefinition: true`) to be 'distinct'. Specifically, add an assembler
check, a verifier check, and bitcode upgrading logic to combat testcase
bitrot after the `DIBuilder` change.
While working on the testcases, I realized that
test/Linker/subprogram-linkonce-weak-odr.ll isn't relevant anymore. Its
purpose was to check for a corner case in PR22792 where two subprogram
definitions match exactly and share the same metadata node. The new
verifier check, requiring that subprogram definitions are 'distinct',
precludes that possibility.
I updated almost all the IR with the following script:
git grep -l -E -e '= !DISubprogram\(.* isDefinition: true' |
grep -v test/Bitcode |
xargs sed -i '' -e 's/= \(!DISubprogram(.*, isDefinition: true\)/= distinct \1/'
Likely some variant of would work for out-of-tree testcases.
llvm-svn: 246327
I looked into adding a warning / error for this to FileCheck, but there doesn't
seem to be a good way to avoid it triggering on the instances of it in RUN lines.
llvm-svn: 244481
Summary:
Emit both DWARF and CodeView if "CodeView" and "Dwarf Version" module
flags are set.
Reviewers: majnemer
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11756
llvm-svn: 244158
Since r241097, `DIBuilder` has only created distinct `DICompileUnit`s.
The backend is liable to start relying on that (if it hasn't already),
so make uniquable `DICompileUnit`s illegal and automatically upgrade old
bitcode. This is a nice cleanup, since we can remove an unnecessary
`DenseSet` (and the associated uniquing info) from `LLVMContextImpl`.
Almost all the testcases were updated with this script:
git grep -e '= !DICompileUnit' -l -- test |
grep -v test/Bitcode |
xargs sed -i '' -e 's,= !DICompileUnit,= distinct !DICompileUnit,'
I imagine something similar should work for out-of-tree testcases.
llvm-svn: 243885
The test part of r241149 has been reverted in r241451, due to misplaced test cases.
This patch splits those test cases among the appropriate targets.
Differential Revision: http://reviews.llvm.org/D10897
llvm-svn: 241283
Some of the the permissible ARM -mfpu options, which are supported in GCC,
are currently not present in llvm/clang.This patch adds the options:
'neon-fp16', 'vfpv3-fp16', 'vfpv3-d16-fp16', 'vfpv3xd' and 'vfpv3xd-fp16.
These are related to half-precision floating-point and single precision.
Reviewers: rengolin, ranjeet.singh
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D10645
llvm-svn: 240930
This causes errors like:
ld: error: blah.o: requires dynamic R_X86_64_PC32 reloc against '' which
may overflow at runtime; recompile with -fPIC
blah.cc:function f(): error: undefined reference to ''
blah.o:g(): error: undefined reference to ''
I have not yet come up with an appropriate reproduction.
llvm-svn: 240394
According to the documentation, .thumb_set is 'the equivalent of a .set directive'.
We didn't have equivalent behaviour in terms of all the errors we could throw, for
example, when a symbol is redefined.
This change refactors parseAssignment so that it can be used by .set and .thumb_set
and implements tests for .thumb_set for all the errors thrown by that method.
Reviewed by Rafael Espíndola.
llvm-svn: 240318
Now that pr23900 is fixed, we can bring it back with no changes.
Original message:
Make all temporary symbols unnamed.
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240302
What this does is make all symbols that would otherwise start with a .L
(or L on MachO) unnamed.
Some of these symbols still show up in the symbol table, but we can just
make them unnamed.
In order to make sure we produce identical results when going thought assembly,
all .L (not just the compiler produced ones), are now unnamed.
Running llc on llvm-as.opt.bc, the peak memory usage goes from 208.24MB to
205.57MB.
llvm-svn: 240130
These are added mainly for the benefit of clang, but this also means that they
are now allowed in .fpu directives and we emit the correct .fpu directive when
single-precision-only is used.
Differential Revision: http://reviews.llvm.org/D10238
llvm-svn: 239151
Section symbols exist as an optimization: instead of having multiple relocations
point to different symbols, many of them can point to a single section symbol.
When that optimization is unused, a section symbol is also unused and adds no
extra information to the object file.
This saves a bit of space on the object files and makes the output of
llvm-objdump -t easier to read and consequently some tests get quite a bit
simpler.
llvm-svn: 239045
The ELF spec is very clear:
-----------------------------------------------------------------------------
If the value is non-zero, it represents a string table index that gives the
symbol name. Otherwise, the symbol table entry has no name.
--------------------------------------------------------------------------
In particular, a st_name of 0 most certainly doesn't mean that the symbol has
the same name as the section.
llvm-svn: 238899
ELF has no restrictions on where undefined symbols go relative to other defined
symbols. In fact, gas just sorts them together. Do the same.
This was there since r111174 probably just because the MachO writer has it.
llvm-svn: 238513
Now that most of the methods in Clang and LLVM that were parsing arch/cpu/fpu
strings are using ARMTargetParser, it's time to make it a bit more conforming
with what the ABI says.
This commit adds some clarification on what build attributes are accepted and
which are "non-standard". It also makes clear that the "defaultCPU" and
"defaultArch" methods were really just build attribute getters.
It also diverges from GCC's behaviour to say that armv2/armv3 are really an
ARMv4 in the build attributes, when the ABI has a clear state for that: Pre-v4.
llvm-svn: 238344
The list of subtarget features for the 7em triple contains 't2xtpk',
which actually disables that subtarget feature. Correct that to
'+t2xtpk' and test that the instructions enabled by that feature do
actually work.
Differential Revision: http://reviews.llvm.org/D9936
llvm-svn: 238022
The DWARF-4 specification added 2 new fields in the CIE header called
address_size and segment_size.
Create these 2 new fields when generating dwarf-4 CIE entries, print out
the new fields when dumping the CIE and update tests
Differential Revision: http://reviews.llvm.org/D9558
llvm-svn: 237145
During ELF writing, there is no need to further relax the sections, so we
should not be creating fragments. This patch avoids doing so in all cases
but debug section compression (that is next).
Also, the ELF format is fairly simple to write. We can do a single pass over
the sections to write them out and compute the section header table.
llvm-svn: 236235
Instead of accumulating the content in a fragment first, just write it
to the output stream.
Also put it first in the section table, so that we never have to worry
about its index being >= SHN_LORESERVE.
llvm-svn: 236145
Tim Northover