microMIPS jump and link exchange instruction stores a target in a
26-bits field. Despite other microMIPS JAL instructions these bits
are target address shifted right 2 bits [1]. The patch fixes the
JALX instruction decoding and uses 2-bit shift.
[1] MIPS Architecture for Programmers Volume II-B: The microMIPS32 Instruction Set
Differential Revision: https://reviews.llvm.org/D67320
llvm-svn: 371428
The family of 'dual-accumulating' vector multiply-add instructions
(VMLADAV, VMLALDAV and VRMLALDAVH) can all operate on both signed and
unsigned integer types, and they all have an 'exchange' variant (with
an X in the name) that modifies which pairs of vector lanes in the two
inputs are multiplied together. But there's a clause in the spec that
says that the X variants //don't// operate on unsigned integer types,
only signed. You can have X, or unsigned, or neither, but not both.
We didn't notice that clause when we implemented the MC support for
these instructions, so LLVM believes that things like VMLADAVX.U8 do
exist, contradicting the spec. Here I fix that by conditioning them
out in Tablegen.
In order to do that, I've reversed the nesting order of the Tablegen
multiclasses for those instructions. Previously, the innermost
multiclass generated the X and not-X variants, and the one outside
that generated the A and not-A variants. Now X is done by the outer
multiclass, which allows me to bypass that one when I only want the
two not-X variants.
Changing the multiclass nesting order also changes the names of the
instruction ids unless I make a special effort not to. I decided that
while I was changing them anyway I'd make them look nicer; so now the
instructions have names like MVE_VMLADAVs32 or MVE_VMLADAVaxs32,
instead of cumbersome _noacc_noexch suffixes.
The corresponding multiply-subtract instructions are unaffected. Those
don't accept unsigned types at all, either in the spec or in LLVM.
Reviewers: ostannard, dmgreen
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67214
llvm-svn: 371405
Specify the Unpredictable bits, and return softfails when appropriate.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66939
llvm-svn: 371374
Decoding of VMSR doesn't diagnose some unpredictable encodings, as the unpredictable bits are not correctly set.
Diff-reduce this instruction's internals WRT VMRS so I can see the differences better. Mostly this is s/src/Rt/g.
Fill in the "should-be-(0)" bits.
Designate the Unpredictable{} bits for both VMRS and VMSR.
Patch by Mark Murray!
Differential revision: https://reviews.llvm.org/D66938
llvm-svn: 370729
Summary:
Reported in https://github.com/opencv/opencv/issues/15413.
We have serveral extended mnemonics for Move To/From Vector-Scalar Register Instructions
eg: mffprd,mtfprd etc.
We only support one of them, this patch add the others.
Reviewers: nemanjai, steven.zhang, hfinkel, #powerpc
Reviewed By: hfinkel
Subscribers: wuzish, qcolombet, hiraditya, kbarton, MaskRay, shchenz, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66963
llvm-svn: 370411
Summary:
According to the Armv8.1-M manual CSEL, CSINC, CSINV and CSNEG are
"constrained unpredictable" when SP is used as the source register Rn.
The assembler should diagnose this case.
Reviewers: momchil.velikov, dmgreen, ostannard, simon_tatham, t.p.northover
Reviewed By: ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65505
llvm-svn: 367433
Embedded Trace Extension and Trace Buffer Extension are optional
future architecture extensions.
(cf. https://developer.arm.com/architectures/cpu-architecture/a-profile/exploration-tools)
Their system registers are documented here:
https://developer.arm.com/docs/ddi0601/a
ETE shares register names with ETM. One exception is the ETE
TRCEXTINSELR0 register, which has the same encoding as the ETM
TRCEXTINSELR register (but different semantics). This patch treats
them as aliases: the assembler will accept both names, emitting
identical encoding, and the disassembler will keep disassembling
to TRCEXRINSELR.
Differential Revision: https://reviews.llvm.org/D63707
llvm-svn: 367093
Summary:
According to the new Armv8-M specification
https://static.docs.arm.com/ddi0553/bh/DDI0553B_h_armv8m_arm.pdf the
instructions SQRSHRL and UQRSHLL now have an additional immediate
operand <saturate>. The new assembly syntax is:
SQRSHRL<c> RdaLo, RdaHi, #<saturate>, Rm
UQRSHLL<c> RdaLo, RdaHi, #<saturate>, Rm
where <saturate> can be either 64 (the existing behavior) or 48, in
that case the result is saturated to 48 bits.
The new operand is encoded as follows:
#64 Encoded as sat = 0
#48 Encoded as sat = 1
sat is bit 7 of the instruction bit pattern.
This patch adds a new assembler operand class MveSaturateOperand which
implements parsing and encoding. Decoding is implemented in
DecodeMVEOverlappingLongShift.
Reviewers: ostannard, simon_tatham, t.p.northover, samparker, dmgreen, SjoerdMeijer
Reviewed By: simon_tatham
Subscribers: javed.absar, kristof.beyls, hiraditya, pbarrio, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64810
llvm-svn: 366555
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
This patch series adds support for the next-generation arch13
CPU architecture to the SystemZ backend.
This includes:
- Basic support for the new processor and its features.
- Assembler/disassembler support for new instructions.
- CodeGen for new instructions, including new LLVM intrinsics.
- Scheduler description for the new processor.
- Detection of arch13 as host processor.
Note: No currently available Z system supports the arch13
architecture. Once new systems become available, the
official system name will be added as supported -march name.
llvm-svn: 365932
The VQDMLAH.U8, VQDMLAH.U16 and VQDMLAH.U32 instructions don't
actually exist: the Armv8.1-M architecture spec only lists signed
forms of that instruction. The unsigned ones were added in error: they
existed in an early draft of the spec, but they were removed before
the public version, and we missed that particular spec change.
Also affects the variant forms VQDMLASH, VQRDMLAH and VQRDMLASH.
Reviewers: miyuki
Subscribers: javed.absar, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64502
llvm-svn: 365747
This was reported in https://bugs.llvm.org/show_bug.cgi?id=41751
llvm-mc aborted when disassembling tabortdc.
This patch try to clean up TM related DAGs.
* Fixes the problem by remove explicit output of cr0, and put it as implicit def.
* Update int_ppc_tbegin pattern to accommodate the implicit def of cr0.
* Update the TCHECK operand and int_ppc_tcheck accordingly.
* Add some builtin test and disassembly tests.
* Remove unused CRRC0/crrc0
Differential Revision: https://reviews.llvm.org/D61935
llvm-svn: 364544
The BF and WLS/WLSTP instructions have various branch-offset fields
occupying different positions and lengths in the instruction encoding,
and all of them were decoded at disassembly time by the function
DecodeBFLabelOffset() which returned SoftFail if the offset was zero.
In fact, it's perfectly fine and not even a SoftFail for most of those
offset fields to be zero. The only one that can't be zero is the 4-bit
field labelled `boff` in the architecture spec, occupying bits {26-23}
of the BF instruction family. If that one is zero, the encoding
overlaps other instructions (WLS, DLS, LETP, VCTP), so it ought to be
a full Fail.
Fixed by adding an extra template parameter to DecodeBFLabelOffset
which controls whether a zero offset is accepted or rejected. Adjusted
existing tests (only in error messages for bad disassemblies); added
extra tests to demonstrate zero offsets being accepted in all the
right places, and a few demonstrating rejection of zero `boff`.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63864
llvm-svn: 364533
Different versions of the Arm architecture disallow the use of generic
coprocessor instructions like MCR and CDP on different sets of
coprocessors. This commit centralises the check of the coprocessor
number so that it's consistent between assembly and disassembly, and
also updates it for the new restrictions in Arm v8.1-M.
New tests added that check all the coprocessor numbers; old tests
updated, where they used a number that's now become illegal in the
context in question.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63863
llvm-svn: 364532
In the `CSEL Rd,Rm,Rn` instruction family (also including CSINC, CSINV
and CSNEG), the architecture lists it as CONSTRAINED UNPREDICTABLE
(i.e. SoftFail) to use SP in the Rd or Rm slot, but outright illegal
to use it in the Rn slot, not least because some encodings of that
form are used by MVE instructions such as UQRSHLL.
MC was treating all three slots the same, as SoftFail. So the only
reason UQRSHLL was disassembled correctly at all was because the MVE
decode table is separate from the Thumb2 one and takes priority; if
you turned off MVE, then encodings such as `[0x5f,0xea,0x0d,0x83]`
would disassemble as spurious CSELs.
Fixed by inventing another version of the `GPRwithZR` register class,
which disallows SP completely instead of just SoftFailing it.
Reviewers: DavidSpickett, ostannard
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63862
llvm-svn: 364531
This adds some extra RUN lines to existing test files, to check that
things that worked in previous architecture versions haven't
accidentally stopped working in 8.1-M. Also we add some new tests: a
test of scalar floating point instructions that could be easily
confused with the similar-looking vector ones at assembly time, a test
of basic load/store/move access to the FP registers (which has to work
even in integer-only MVE); and one final check of the really obvious
case where turning off MVE should make sure MVE instructions really
are rejected.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62682
llvm-svn: 364293
This final batch includes the tail-predicated versions of the
low-overhead loop instructions (LETP); the VPSEL instruction to select
between two vector registers based on the predicate mask without
having to open a VPT block; and VPNOT which complements the predicate
mask in place.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62681
llvm-svn: 364292
This adds the rest of the vector memory access instructions. It
includes contiguous loads/stores, with an ordinary addressing mode
such as [r0,#offset] (plus writeback variants); gather loads and
scatter stores with a scalar base address register and a vector of
offsets from it (written [r0,q1] or similar); and gather/scatters with
a vector of base addresses (written [q0,#offset], again with
writeback). Additionally, some of the loads can widen each loaded
value into a larger vector lane, and the corresponding stores narrow
them again.
To implement these, we also have to add the addressing modes they
need. Also, in AsmParser, the `isMem` query function now has
subqueries `isGPRMem` and `isMVEMem`, according to which kind of base
register is used by a given memory access operand.
I've also had to add an extra check in `checkTargetMatchPredicate` in
the AsmParser, without which our last-minute check of `rGPR` register
operands against SP and PC was failing an assertion because Tablegen
had inserted an immediate 0 in place of one of a pair of tied register
operands. (This matches the way the corresponding check for `MCK_rGPR`
in `validateTargetOperandClass` is guarded.) Apparently the MVE load
instructions were the first to have ever triggered this assertion, but
I think only because they were the first to have a combination of the
usual Arm pre/post writeback system and the `rGPR` class in particular.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62680
llvm-svn: 364291
Summary:
The LLVM disassembler assumes that the unused src0 operand of v_nop is
zero. Other tools can put another value in that field, which is still
valid. This commit fixes the LLVM disassembler to recognize such an
encoding as v_nop, in the same way as we already do for s_getpc.
Differential Revision: https://reviews.llvm.org/D63724
Change-Id: Iaf0363eae26ff92fc4ebc716216476adbff37a6f
llvm-svn: 364208
This adds the family of loads and stores with names like VLD20.8 and
VST42.32, which load and store parts of multiple q-registers in such a
way that executing both VLD20 and VLD21, or all four of VLD40..VLD43,
will distribute 2 or 4 vectors' worth of memory data across the lanes
of the same number of registers but in a transposed order.
In addition to the Tablegen descriptions of the instructions
themselves, this patch also adds encode and decode support for the
QQPR and QQQQPR register classes (representing the range of loaded or
stored vector registers), and tweaks to the parsing system for lists
of vector registers to make it return the right format in this case
(since, unlike NEON, MVE regards q-registers as primitive, and not
just an alias for two d-registers).
llvm-svn: 364172
These instructions let you load half a vector register at once from
two general-purpose registers, or vice versa.
The assembly syntax for these instructions mentions the vector
register name twice. For the move _into_ a vector register, the MC
operand list also has to mention the register name twice (once as the
output, and once as an input to represent where the unchanged half of
the output register comes from). So we can conveniently assign one of
the two asm operands to be the output $Qd, and the other $QdSrc, which
avoids confusing the auto-generated AsmMatcher too much. For the move
_from_ a vector register, there's no way to get round the fact that
both instances of that register name have to be inputs, so we need a
custom AsmMatchConverter to avoid generating two separate output MC
operands. (And even that wouldn't have worked if it hadn't been for
D60695.)
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62679
llvm-svn: 364041
This adds the `MVE_qDest_rSrc` superclass and all its instances, plus
a few other instructions that also take a scalar input register or two.
I've also belatedly added custom diagnostic messages to the operand
classes for odd- and even-numbered GPRs, which required matching
changes in two of the existing MVE assembly test files.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62678
llvm-svn: 364040
Summary:
This adds the `MVE_qDest_qSrc` superclass and all instructions that
inherit from it. It's not the complete class of _everything_ with a
q-register as both destination and source; it's a subset of them that
all have similar encodings (but it would have been hopelessly unwieldy
to call it anything like MVE_111x11100).
This category includes add/sub with carry; long multiplies; halving
multiplies; multiply and accumulate, and some more complex
instructions.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62677
llvm-svn: 364037
Summary:
These take a pair of vector register to compare, and a comparison type
(written in the form of an Arm condition suffix); they output a vector
of booleans in the VPR register, where predication can conveniently
use them.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62676
llvm-svn: 364027
This includes integer arithmetic of various kinds (add/sub/multiply,
saturating and not), and the immediate forms of VMOV and VMVN that
load an immediate into all lanes of a vector.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62674
llvm-svn: 363936
This includes all the obvious bitwise operations (AND, OR, BIC, ORN,
MVN) in register-to-register forms, and the immediate forms of
AND/OR/BIC/ORN; byte-order reverse instructions; and the VMOVs that
access a single lane of a vector.
Some of those VMOVs (specifically, the ones that access a 32-bit lane)
share an encoding with existing instructions that were disassembled as
accessing half of a d-register (e.g. `vmov.32 r0, d1[0]`), but in
8.1-M they're now written as accessing a quarter of a q-register (e.g.
`vmov.32 r0, q0[2]`). The older syntax is still accepted by the
assembler.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62673
llvm-svn: 363838
Vector load/store instructions support an optional alignment field
that the compiler can use to provide known alignment info to the
hardware. If the field is used (and the information is correct),
the hardware may be able (on some models) to perform faster memory
accesses than otherwise.
This patch adds support for alignment hints in the assembler and
disassembler, and fills in known alignment during codegen.
llvm-svn: 363806
This includes saturating and non-saturating shifts, both with
immediate shift count and with the shift counts given by another
vector register; VSHLC (in which the bits shifted out of each active
vector lane are shifted in to the next active lane); and also VMOVL,
which is enough like an immediate shift that it didn't fit too badly
in this category.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62672
llvm-svn: 363696
Summary:
These form a small family of their own, to go with the floating-point
VMINNM/VMAXNM instructions added in a previous commit.
They introduce the first of many special cases in the mnemonic
recognition code, because VMIN with the E suffix used by the VPT
predication system needs to avoid being interpreted as the nonexistent
instruction 'VMI' with an ordinary 'NE' condition suffix.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Subscribers: javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62671
llvm-svn: 363695
Simon Atanasyan