... so just ensure that we pass DomTreeUpdater it into it.
Fixes DomTree preservation for a large number of tests,
all of which are marked as such so that they do not regress.
When folding a branch to a common destination, preserve !annotation on
the created instruction, if the terminator of the BB that is going to be
removed has !annotation. This should ensure that !annotation is attached
to the instructions that 'replace' the original terminator.
Reviewed By: jdoerfert, lebedev.ri
Differential Revision: https://reviews.llvm.org/D93410
... so just ensure that we pass DomTreeUpdater it into it.
Fixes DomTree preservation for a large number of tests,
all of which are marked as such so that they do not regress.
... so just ensure that we pass DomTreeUpdater it into it.
Fixes DomTree preservation for a large number of tests,
all of which are marked as such so that they do not regress.
Two observations:
1. Unavailability of DomTree makes it impossible to make
`FoldBranchToCommonDest()` transform in certain cases,
where the successor is dominated by predecessor,
because we then don't have PHI's, and can't recreate them,
well, without handrolling 'is dominated by' check,
which doesn't really look like a great solution to me.
2. Avoiding invalidating DomTree in SimplifyCFG will
decrease the number of `Dominator Tree Construction` by 5
(from 28 now, i.e. -18%) in `-O3` old-pm pipeline
(as per `llvm/test/Other/opt-O3-pipeline.ll`)
This might or might not be beneficial for compile time.
So the plan is to make SimplifyCFG preserve DomTree, and then
eventually make DomTree fully required and preserved by the pass.
Now, SimplifyCFG is ~7KLOC. I don't think it will be nice
to do all this uplifting in a single mega-commit,
nor would it be possible to review it in any meaningful way.
But, i believe, it should be possible to do this in smaller steps,
introducing the new behavior, in an optional way, off-by-default,
opt-in option, and gradually fixing transforms one-by-one
and adding the flag to appropriate test coverage.
Then, eventually, the default should be flipped,
and eventually^2 the flag removed.
And that is what is happening here - when the new off-by-default option
is specified, DomTree is required and is claimed to be preserved,
and SimplifyCFG-internal assertions verify that the DomTree is still OK.
Even though d38205144f was mostly a correct
fix for the external non-PHI users, it's not a *generally* correct fix,
because the 'placeholder' values in those trivial PHI's we create
shouldn't be *always* 'undef', but the PHI itself for the backedges,
else we end up with wrong value, as the `@pr48450_2` test shows.
But we can't just do that, because we can't check that the PHI
can be it's own incoming value when coming from certain predecessor,
because we don't have a dominator tree.
So until we can address this correctness problem properly,
ensure that we don't perform the transformation
if there are such problematic external uses.
Making dominator tree available there is going to be involved,
since `-simplifycfg` pass currently does not preserve/update domtree...
In particular, if the successor block, which is about to get a new
predecessor block, currently only has a single predecessor,
then the bonus instructions will be directly used within said successor,
which is fine, since the block with bonus instructions dominates that
successor. But once there's a new predecessor, the IR is no longer valid,
and we don't fix it, because we only update PHI nodes.
Which means, the live-out bonus instructions must be exclusively used
by the PHI nodes in successor blocks. So we have to form trivial PHI nodes.
which will then be successfully updated to recieve cloned bonus instns.
This all works fine, except for the fact that we don't have access to
the dominator tree, and we don't ignore unreachable code,
so we sometimes do end up having to deal with some weird IR.
Fixes https://bugs.llvm.org/show_bug.cgi?id=48450
There is no correctness need for that, and since we allow live-out
uses, this could theoretically happen, because currently nothing
will move the cond to right before the branch in those tests.
But regardless, lifting that restriction even makes the transform
easier to understand.
This makes the transform happen in 81 more cases (+0.55%)
)
This was orginally committed in 2245fb8aaa.
but was immediately reverted in f3abd54958
because of a PHI handling issue.
Original commit message:
1. It doesn't make sense to enforce that the bonus instruction
is only used once in it's basic block. What matters is
whether those user instructions fit within our budget, sure,
but that is another question.
2. It doesn't make sense to enforce that said bonus instructions
are only used within their basic block. Perhaps the branch
condition isn't using the value computed by said bonus instruction,
and said bonus instruction is simply being calculated
to be used in successors?
So iff we can clone bonus instructions, to lift these restrictions,
we just need to carefully update their external uses
to use the new cloned instructions.
Notably, this transform (even without this change) appears to be
poison-unsafe as per alive2, but is otherwise (including the patch) legal.
We don't introduce any new PHI nodes, but only "move" the instructions
around, i'm not really seeing much potential for extra cost modelling
for the transform, especially since now we allow at most one such
bonus instruction by default.
This causes the fold to fire +11.4% more (13216 -> 14725)
as of vanilla llvm test-suite + RawSpeed.
The motivational pattern is IEEE-754-2008 Binary16->Binary32
extension code:
ca57d77fb2/src/librawspeed/common/FloatingPoint.h (L115-L120)
^ that should be a switch, but it is not now: https://godbolt.org/z/bvja5v
That being said, even thought this seemed like this would fix it: https://godbolt.org/z/xGq3TM
apparently that fold is happening somewhere else afterall,
so something else also has a similar 'artificial' restriction.
Many bots are unhappy, at the very least missed a few codegen tests,
and possibly this has a logic hole inducing a miscompile
(will be really awesome to have ready reproducer..)
Need to investigate.
This reverts commit 2245fb8aaa.
1. It doesn't make sense to enforce that the bonus instruction
is only used once in it's basic block. What matters is
whether those user instructions fit within our budget, sure,
but that is another question.
2. It doesn't make sense to enforce that said bonus instructions
are only used within their basic block. Perhaps the branch
condition isn't using the value computed by said bonus instruction,
and said bonus instruction is simply being calculated
to be used in successors?
So iff we can clone bonus instructions, to lift these restrictions,
we just need to carefully update their external uses
to use the new cloned instructions.
Notably, this transform (even without this change) appears to be
poison-unsafe as per alive2, but is otherwise (including the patch) legal.
We don't introduce any new PHI nodes, but only "move" the instructions
around, i'm not really seeing much potential for extra cost modelling
for the transform, especially since now we allow at most one such
bonus instruction by default.
This causes the fold to fire +11.4% more (13216 -> 14725)
as of vanilla llvm test-suite + RawSpeed.
The motivational pattern is IEEE-754-2008 Binary16->Binary32
extension code:
ca57d77fb2/src/librawspeed/common/FloatingPoint.h (L115-L120)
^ that should be a switch, but it is not now: https://godbolt.org/z/bvja5v
That being said, even thought this seemed like this would fix it: https://godbolt.org/z/xGq3TM
apparently that fold is happening somewhere else afterall,
so something else also has a similar 'artificial' restriction.
This change introduces a new IR intrinsic named `llvm.pseudoprobe` for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
A pseudo probe is used to collect the execution count of the block where the probe is instrumented. This requires a pseudo probe to be persisting. The LLVM PGO instrumentation also instruments in similar places by placing a counter in the form of atomic read/write operations or runtime helper calls. While these operations are very persisting or optimization-resilient, in theory we can borrow the atomic read/write implementation from PGO counters and cut it off at the end of compilation with all the atomics converted into binary data. This was our initial design and we’ve seen promising sample correlation quality with it. However, the atomics approach has a couple issues:
1. IR Optimizations are blocked unexpectedly. Those atomic instructions are not going to be physically present in the binary code, but since they are on the IR till very end of compilation, they can still prevent certain IR optimizations and result in lower code quality.
2. The counter atomics may not be fully cleaned up from the code stream eventually.
3. Extra work is needed for re-targeting.
We choose to implement pseudo probes based on a special LLVM intrinsic, which is expected to have most of the semantics that comes with an atomic operation but does not block desired optimizations as much as possible. More specifically the semantics associated with the new intrinsic enforces a pseudo probe to be virtually executed exactly the same number of times before and after an IR optimization. The intrinsic also comes with certain flags that are carefully chosen so that the places they are probing are not going to be messed up by the optimizer while most of the IR optimizations still work. The core flags given to the special intrinsic is `IntrInaccessibleMemOnly`, which means the intrinsic accesses memory and does have a side effect so that it is not removable, but is does not access memory locations that are accessible by any original instructions. This way the intrinsic does not alias with any original instruction and thus it does not block optimizations as much as an atomic operation does. We also assign a function GUID and a block index to an intrinsic so that they are uniquely identified and not merged in order to achieve good correlation quality.
Let's now look at an example. Given the following LLVM IR:
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
br i1 %cmp, label %bb1, label %bb2
bb1:
br label %bb3
bb2:
br label %bb3
bb3:
ret void
}
```
The instrumented IR will look like below. Note that each `llvm.pseudoprobe` intrinsic call represents a pseudo probe at a block, of which the first parameter is the GUID of the probe’s owner function and the second parameter is the probe’s ID.
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86490
This reverts the revert commit 408c4408fa.
This version of the patch includes a fix for a crash caused by
treating ICmp/FCmp constant expressions as instructions.
Original message:
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
CallInst::updateProfWeight() creates branch_weights with i64 instead of i32.
To be more consistent everywhere and remove lots of casts from uint64_t
to uint32_t, use i64 for branch_weights.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D88609
On some targets, like AArch64, vector selects can be efficiently lowered
if the vector condition is a compare with a supported predicate.
This patch adds a new argument to getCmpSelInstrCost, to indicate the
predicate of the feeding select condition. Note that it is not
sufficient to use the context instruction when querying the cost of a
vector select starting from a scalar one, because the condition of the
vector select could be composed of compares with different predicates.
This change greatly improves modeling the costs of certain
compare/select patterns on AArch64.
I am also planning on putting up patches to make use of the new argument in
SLPVectorizer & LV.
Reviewed By: dmgreen, RKSimon
Differential Revision: https://reviews.llvm.org/D90070
CallInst::updateProfWeight() creates branch_weights with i64 instead of i32.
To be more consistent everywhere and remove lots of casts from uint64_t
to uint32_t, use i64 for branch_weights.
Reviewed By: davidxl
Differential Revision: https://reviews.llvm.org/D88609
Modify FoldBranchToCommonDest to consider the cost of inserting
instructions when attempting to combine predicates to fold blocks.
The threshold can be controlled via a new option:
-simplifycfg-branch-fold-threshold which defaults to '2' to allow
the insertion of a not and another logical operator.
Differential Revision: https://reviews.llvm.org/D86526
Before we speculatively execute a basic block, query the cost of
inserting the necessary select instructions against the phi folding
threshold. For non-trivial insertions, a more accurate decision can
probably be made during machine if-conversion. With minsize we query
the CodeSize cost, otherwise we use SizeAndLatency.
Differential Revision: https://reviews.llvm.org/D82438
SimplifyCFG has two main folds for resumes - one when resume is directly
using the landingpad, and the other one where resume is using a PHI node.
While for the first case, we were already correctly ignoring all the
PHI nodes, and both the debug info intrinsics and lifetime intrinsics,
in the PHI-based-one, we weren't ignoring PHI's in the resume block,
and weren't ignoring lifetime intrinsics. That is clearly a bug.
On RawSpeed library, this results in +9.34% (+81) more invoke->call folds,
-0.19% (-39) landing pads, -0.24% (-81) invoke instructions
but +51 call instructions and -132 basic blocks.
Though, the run-time performance impact appears to be within the noise.
We do not thread blocks with convergent calls, but this check was missing
when we decide to insert PR Phis into it (which we only do for threading).
Differential Revision: https://reviews.llvm.org/D83936
Reviewed By: nikic
Common code sinking is already guarded with a (with default-off!) flag,
so add a flag for hoisting, too.
D84108 will hopefully make hoisting off-by-default too.
SimplifyCFG was incorrectly reporting to the pass manager that it had not made
changes after folding away a PHI. This is detected in the EXPENSIVE_CHECKS
build when the function's hash changes.
Differential Revision: https://reviews.llvm.org/D83985
Sometimes SimplifyCFG may decide to perform jump threading. In order
to do it, it follows the following algorithm:
1. Checks if the block is small enough for threading;
2. If yes, inserts a PR Phi relying that the next iteration will remove it
by performing jump threading;
3. The next iteration checks the block again and performs the threading.
This logic has a corner case: inserting the PR Phi increases block's size
by 1. If the block size at first check was max possible, one more Phi will
exceed this size, and we will neither perform threading nor remove the
created Phi node. As result, we will end up with worse IR than before.
This patch fixes this situation by excluding Phis from block size computation.
Excluding Phis from size computation for threading also makes sense by
itself because in case of threadign all those Phis will be removed.
Differential Revision: https://reviews.llvm.org/D81835
Reviewed By: asbirlea, nikic
It's possible for the first loop trip(s) to set the `Changed` Status, and to a
later one to early exit, in which case `Changed` must be return.
Differential Revision: https://reviews.llvm.org/D82753
Summary:
According to HowToUpdateDebugInfo.rst:
```
Preserving the debug locations of speculated instructions can make
it seem like a condition is true when it's not (or vice versa), which
leads to a confusing single-stepping experience
```
This patch follows the recommendation to drop debug locations on
speculated instructions.
Reviewers: aprantl, davide
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82420
We want to add a way to avoid merging identical calls so as to keep the
separate debug-information for those calls. There is also an asan
usecase where having this attribute would be beneficial to avoid
alternative work-arounds.
Here is the link to the feature request:
https://bugs.llvm.org/show_bug.cgi?id=42783.
`nomerge` is different from `noline`. `noinline` prevents function from
inlining at callsites, but `nomerge` prevents multiple identical calls
from being merged into one.
This patch adds `nomerge` to disable the optimization in IR level. A
followup patch will be needed to let backend understands `nomerge` and
avoid tail merge at backend.
Reviewed By: asbirlea, rnk
Differential Revision: https://reviews.llvm.org/D78659
FoldBranchToCommonDest clones instructions to a different basic block,
but handles debug intrinsics in a separate path. Previously, when
cloning debug intrinsics, their operands were not updated to reference
the correct cloned values. As a result, we would emit debug.value
intrinsics with broken operand references which are discarded in later
passes. This leads to incorrect debuginfo that reports incorrect values
for variables.
Fix this by remapping debug intrinsic operands when cloning them.
Fixes https://bugs.llvm.org/show_bug.cgi?id=45667.
Differential Revision: https://reviews.llvm.org/D79602
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Since intrinsics can now specify when an argument is required to be
constant, it is now OK to replace arguments with variables if they
aren't. This means intrinsics must now be accurately marked with
immarg.
This reverts commit 61b35e4111.
This commit causes a timeout in chromium builds; likely to have a
similar cause to the previous timeout issue caused by this commit (see
6ded69f294 for more details). It is possible that there is no way to
fix this bug that will not cause this issue; further investigations as
to the efficiency of handling large amounts of debug info will be
necessary.
This reverts commit 636c93ed11.
The original patch caused build failures on TSan buildbots. Commit 6ded69f294
fixes this issue by reducing the rate at which empty debug intrinsics
propagate, reducing the memory footprint and preventing a fatal spike.
This fixes a bug where a PHI node that is only referenced by a lifetime.end intrinsic in an otherwise empty cleanuppad can cause SimplyCFG to create an SSA violation while removing the empty cleanuppad. Theoretically the same problem can occur with debug intrinsics.
Differential Revision: https://reviews.llvm.org/D72540
basic blocks
Originally applied in 72ce759928.
Fixed a build failure caused by incorrect use of cast instead of
dyn_cast.
This reverts commit 8b0780f795.
AssumptionCache can be null in SimplifyCFGOptions. However, FoldCondBranchOnPHI() was not properly handling that when passing a null AssumptionCache to simplifyCFG.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: fhahn, lebedev.ri, spatel
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D69963
When basic blocks are killed, either due to being empty or to being an if.then
or if.else block whose complement contains identical instructions, some of the
debug intrinsics in that block are lost. This patch sinks those intrinsics
into the single successor block, setting them Undef if necessary to
prevent debug info from falling out-of-date.
Differential Revision: https://reviews.llvm.org/D70318
Similar to/extension of D70208 (rGee0882bdf866), but this one
may finally allow closing motivating bugs.
This is another step towards having FMF apply only to FP values
rather than those + fcmp. See PR38086 for one of the original
discussions/motivations:
https://bugs.llvm.org/show_bug.cgi?id=38086
And the test here is derived from PR39535:
https://bugs.llvm.org/show_bug.cgi?id=39535
Currently, we lose FMF when converting any phi to select in
SimplifyCFG. There are a small number of similar changes needed
to correct within SimplifyCFG, so it should be quick to patch
this pass up.
FMF was extended to select and phi with:
D61917
D67564
This is another step towards having FMF apply only to FP values
rather than those + fcmp. See PR38086 for one of the original
discussions/motivations:
https://bugs.llvm.org/show_bug.cgi?id=38086
And the test here is derived from PR39535:
https://bugs.llvm.org/show_bug.cgi?id=39535
Currently, we lose FMF when converting any phi to select in
SimplifyCFG. There are a small number of similar changes needed
to correct within SimplifyCFG, so it should be quick to patch
this pass up.
FMF was extended to select and phi with:
D61917
D67564
Differential Revision: https://reviews.llvm.org/D70208
This transformation is a variation on the GuardWidening transformation we have checked in as it's own pass. Instead of focusing on merge (i.e. hoisting and simplifying) two widenable branches, this transform makes the observation that simply removing a second slowpath block (by reusing an existing one) is often a very useful canonicalization. This may lead to later merging, or may not. This is a useful generalization when the intermediate block has loads whose dereferenceability is hard to establish.
As noted in the patch, this can be generalized further, and will be.
Differential Revision: https://reviews.llvm.org/D69689
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
The static analyzer is warning about a potential null dereference, but we should be able to use cast<LandingPadInst> directly and if not assert will fire for us.
llvm-svn: 372727
The static analyzer is warning about a potential null dereference, but we should be able to use cast<Instruction> directly and if not assert will fire for us.
llvm-svn: 372726
MSAN bot complains that there is use-of-uninitialized-value
of this FreeStores later in IsWorthwhile().
Perhaps FreeStores needs to be stored in a vector?
llvm-svn: 372262
Summary:
As it can be see in the changed test, while `div` is really costly,
we were speculating it. This does not seem correct.
Also, the old code would run for every single insturuction in BB,
instead of eagerly bailing out as soon as there are too many instructions.
This function still has a problem that `PHINodeFoldingThreshold` is
per-basic-block, while it should be for all the basic blocks.
Reviewers: efriedma, craig.topper, dmgreen, jmolloy
Reviewed By: jmolloy
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67315
llvm-svn: 372255
Summary:
Previously, if the threshold was 2, we were willing to speculatively
execute 2 cheap instructions in both basic blocks (thus we were willing
to speculatively execute cost = 4), but weren't willing to speculate
when one BB had 3 instructions and other one had no instructions,
even thought that would have total cost of 3.
This looks inconsistent to me.
I don't think `cmov`-like instructions will start executing
until both of it's inputs are available: https://godbolt.org/z/zgHePf
So i don't see why the existing behavior is the correct one.
Also, let's add it's own `cl::opt` for this threshold,
with default=4, so it is not stricter than the previous threshold:
will allow to fold when there are 2 BB's each with cost=2.
And since the logic has changed, it will also allow to fold when
one BB has cost=3 and other cost=1, or there is only one BB with cost=4.
This is an alternative solution to D65148:
This fix is mainly motivated by `signbit-like-value-extension.ll` test.
That pattern comes up in JPEG decoding, see e.g.
`Figure F.12 – Extending the sign bit of a decoded value in V`
of `ITU T.81` (JPEG specification).
That branch is not predictable, and it is within the innermost loop,
so the fact that that pattern ends up being stuck with a branch
instead of `select` (i.e. `CMOV` for x86) is unlikely to be beneficial.
This has great results on the final assembly (vanilla test-suite + RawSpeed): (metric pass - D67240)
| metric | old | new | delta | % |
| x86-mi-counting.NumMachineFunctions | 37720 | 37721 | 1 | 0.00% |
| x86-mi-counting.NumMachineBasicBlocks | 773545 | 771181 | -2364 | -0.31% |
| x86-mi-counting.NumMachineInstructions | 7488843 | 7486442 | -2401 | -0.03% |
| x86-mi-counting.NumUncondBR | 135770 | 135543 | -227 | -0.17% |
| x86-mi-counting.NumCondBR | 423753 | 422187 | -1566 | -0.37% |
| x86-mi-counting.NumCMOV | 24815 | 25731 | 916 | 3.69% |
| x86-mi-counting.NumVecBlend | 17 | 17 | 0 | 0.00% |
We significantly decrease basic block count, notably decrease instruction count,
significantly decrease branch count and very significantly increase `cmov` count.
Performance-wise, unsurprisingly, this has great effect on
target RawSpeed benchmark. I'm seeing 5 **major** improvements:
```
Benchmark Time CPU Time Old Time New CPU Old CPU New
----------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_mean -0.3064 -0.3064 226.9913 157.4452 226.9800 157.4384
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_median -0.3057 -0.3057 226.8407 157.4926 226.8282 157.4828
Samsung/NX3000/_3184416.SRW/threads:8/process_time/real_time_stddev -0.4985 -0.4954 0.3051 0.1530 0.3040 0.1534
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_mean -0.1747 -0.1747 80.4787 66.4227 80.4771 66.4146
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_median -0.1742 -0.1743 80.4686 66.4542 80.4690 66.4436
Kodak/DCS760C/86L57188.DCR/threads:8/process_time/real_time_stddev +0.6089 +0.5797 0.0670 0.1078 0.0673 0.1062
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_mean -0.1598 -0.1598 171.6996 144.2575 171.6915 144.2538
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_median -0.1598 -0.1597 171.7109 144.2755 171.7018 144.2766
Sony/DSLR-A230/DSC08026.ARW/threads:8/process_time/real_time_stddev +0.4024 +0.3850 0.0847 0.1187 0.0848 0.1175
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_mean -0.0550 -0.0551 280.3046 264.8800 280.3017 264.8559
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_median -0.0554 -0.0554 280.2628 264.7360 280.2574 264.7297
Canon/EOS 77D/IMG_4049.CR2/threads:8/process_time/real_time_stddev +0.7005 +0.7041 0.2779 0.4725 0.2775 0.4729
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_pvalue 0.0000 0.0000 U Test, Repetitions: 49 vs 49
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_mean -0.0354 -0.0355 316.7396 305.5208 316.7342 305.4890
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_median -0.0354 -0.0356 316.6969 305.4798 316.6917 305.4324
Canon/EOS 5DS/2K4A9929.CR2/threads:8/process_time/real_time_stddev +0.0493 +0.0330 0.3562 0.3737 0.3563 0.3681
```
That being said, it's always best-effort, so there will likely
be cases where this worsens things.
Reviewers: efriedma, craig.topper, dmgreen, jmolloy, fhahn, Carrot, hfinkel, chandlerc
Reviewed By: jmolloy
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67318
llvm-svn: 372009
Summary:
Here we try to avoid issues with "explicit branch" with SimplifyBranchOnICmpChain
which can check on undef. Msan by design reports branches on uninitialized
memory and undefs, so we have false report here.
In general msan does not like when we convert
```
// If at least one of them is true we can MSAN is ok if another is undefs
if (a || b)
return;
```
into
```
// If 'a' is undef MSAN will complain even if 'b' is true
if (a)
return;
if (b)
return;
```
Example
Before optimization we had something like this:
```
while (true) {
bool maybe_undef = doStuff();
while (true) {
char c = getChar();
if (c != 10 && c != 13)
continue
break;
}
// we know that c == 10 || c == 13 if we get here,
// so msan know that branch is not affected by maybe_undef
if (maybe_undef || c == 10 || c == 13)
continue;
return;
}
```
SimplifyBranchOnICmpChain will convert that into
```
while (true) {
bool maybe_undef = doStuff();
while (true) {
char c = getChar();
if (c != 10 && c != 13)
continue;
break;
}
// however msan will complain here:
if (maybe_undef)
continue;
// we know that c == 10 || c == 13, so either way we will get continue
switch(c) {
case 10: continue;
case 13: continue;
}
return;
}
```
Reviewers: eugenis, efriedma
Reviewed By: eugenis, efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67205
llvm-svn: 371138
Summary:
- Similar to the workaround in fix of PR30188, skip sinking common
lifetime markers of `alloca`. They are mostly left there after
inlining functions in branches.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66950
llvm-svn: 370376
Summary:
As it can be seen in the tests in D65143/D65144, even though we have formed an '@llvm.umul.with.overflow'
and got rid of potential for division-by-zero, the control flow remains, we still have that branch.
We have this condition:
```
// Don't fold i1 branches on PHIs which contain binary operators
// These can often be turned into switches and other things.
if (PN->getType()->isIntegerTy(1) &&
(isa<BinaryOperator>(PN->getIncomingValue(0)) ||
isa<BinaryOperator>(PN->getIncomingValue(1)) ||
isa<BinaryOperator>(IfCond)))
return false;
```
which was added back in rL121764 to help with `select` formation i think?
That check prevents us to flatten the CFG here, even though we know
we no longer need that guard and will be able to drop everything
but the '@llvm.umul.with.overflow' + `not`.
As it can be seen from tests, we end here because the `not` is being
sinked into the PHI's incoming values by InstCombine,
so we can't workaround this by hoisting it to after PHI.
Thus i suggest that we relax that check to not bailout if we'd get to hoist the `not`.
Reviewers: craig.topper, spatel, fhahn, nikic
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65147
llvm-svn: 370349
Currently, when a GVN or CSE optimization happens,
the llvm.preserve.access.index metadata is dropped.
This caused a problem for BPF AbstructMemberOffset phase
as it relies on the metadata (debuginfo types).
This patch added proper hooks in lib/Transforms to
preserve !preserve.access.index metadata. A test
case is added to ensure metadata is preserved under CSE.
Differential Revision: https://reviews.llvm.org/D65700
llvm-svn: 367769
Summary:
Since the for loop iterates over BB's predecessors, the branch conditions found must have BB as one of the successors.
For an unconditional branch the successor must be BB, added `assert`.
For a conditional branch, one of the two successors must be BB, simplify `else if` to `else` and `assert`.
Sink common instructions outside the if/else block.
Reviewers: sanjoy.google
Subscribers: jlebar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65596
llvm-svn: 367699
Summary:
DominatorTree is invalid after SimplifyCFG because of a missed `Changed = true` when simplifying a branch condition and removing an edge.
Resolves PR42272.
Reviewers: zhizhouy, manojgupta
Subscribers: jlebar, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65490
llvm-svn: 367596
Later code in TryToSimplifyUncondBranchFromEmptyBlock() assumes that
we have cleaned up unreachable blocks, but that was not happening
with this switch transform.
llvm-svn: 367037
Using the new SwitchInstProfUpdateWrapper this patch
simplifies 3 places of prof branch_weights handling.
Differential Revision: https://reviews.llvm.org/D62123
llvm-svn: 363652
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
Third time's the charm.
This was reverted in r363220 due to being suspected of an internal benchmark
regression and a test failure, none of which turned out to be caused by this.
llvm-svn: 363529
SimplifyCFG has a bug that results in inconsistent prof branch_weights metadata
if unreachable switch cases are removed. This patch fixes this bug by making use
of the newly introduced SwitchInstProfUpdateWrapper class (see patch D62122).
A new test is created.
Differential Revision: https://reviews.llvm.org/D62186
llvm-svn: 363527
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363422
This reverts 363226 and 363227, both NFC intended
I swear I fixed the test case that is failing, and ran
the tests, but I will look into it again.
llvm-svn: 363229
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
Differential Revision: https://reviews.llvm.org/D61151
llvm-svn: 363227
We have observed some failures with internal builds with this revision.
- Performance regressions:
- llvm's SingleSource/Misc evalloop shows performance regressions (although these may be red herrings).
- Benchmarks for Abseil's SwissTable.
- Correctness:
- Failures for particular libicu tests when building the Google AppEngine SDK (for PHP).
hwennborg has already been notified, and is aware of reproducer failures.
llvm-svn: 363220
This was reverted in r360086 as it was supected of causing mysterious test
failures internally. However, it was never concluded that this patch was the
root cause.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 361811
Rather than gating on "isSwitchDense" (resulting in necessesarily
sparse lookup tables even when they were generated), always run
this quite cheap transform.
This transform is useful not just for generating tables.
LowerSwitch also wants this: read LowerSwitch.cpp:257.
Be careful to not generate worse code, by introducing a
SubThreshold heuristic.
Instead of just sorting by signed, generalize the finding of the
best base.
And now that it is run unconditionally, do not replicate its
functionality in SwitchToLookupTable (which could use a Sub
when having a hole is smaller, hence the SubThreshold
heuristic located in a single place).
This simplifies SwitchToLookupTable, and fixes
some ugly corner cases due to the use of signed numbers,
such as a table containing i16 32768 and 32769, of which
32769 would be interpreted as -32768, and now the code thinks
the table is size 65536.
(We still use unconditional subtraction when building a single-register mask,
but I think this whole block should go when the more general sparse
map is added, which doesn't leave empty holes in the table.)
And the reason test4 and test5 did not trigger was documented wrong:
it was because they were not considered sufficiently "dense".
Also, fix generation of invalid LLVM-IR: shl by bit-width.
llvm-svn: 361727
and replace with an equilivent countTrailingZeros.
GCD is much more expensive than this, with repeated division.
This depends on D60823
llvm-svn: 361726
This matches countLeadingOnes() and countTrailingOnes(), and
APInt's countLeadingZeros() and countTrailingZeros().
(as well as __builtin_clzll())
llvm-svn: 361724
Summary:
Preserve MemorySSA in LoopSimplify, in the old pass manager, if the analysis is available.
Do not preserve it in the new pass manager.
Update tests.
Subscribers: nemanjai, jlebar, javed.absar, Prazek, kbarton, zzheng, jsji, llvm-commits, george.burgess.iv, chandlerc
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60833
llvm-svn: 360270
This reverts r357452 (git commit 21eb771dcb).
This was causing strange optimization-related test failures on an internal test. Will followup with more details offline.
llvm-svn: 360086
The original commit caused false positives from AddressSanitizer's
use-after-scope checks, which have now been fixed in r358478.
> The code was previously checking that candidates for sinking had exactly
> one use or were a store instruction (which can't have uses). This meant
> we could sink call instructions only if they had a use.
>
> That limitation seemed a bit arbitrary, so this patch changes it to
> "instruction has zero or one use" which seems more natural and removes
> the need to special-case stores.
>
> Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 358483
This revision causes tests to fail under ASAN. Since the cause of the failures
is not clear (could be ASAN, could be a Clang bug, could be a bug in this
revision), the safest course of action seems to be to revert while investigating.
llvm-svn: 357667
The code was previously checking that candidates for sinking had exactly
one use or were a store instruction (which can't have uses). This meant
we could sink call instructions only if they had a use.
That limitation seemed a bit arbitrary, so this patch changes it to
"instruction has zero or one use" which seems more natural and removes
the need to special-case stores.
Differential revision: https://reviews.llvm.org/D59936
llvm-svn: 357452
Fixes bug 38023: https://bugs.llvm.org/show_bug.cgi?id=38023
The SimplifyCFG pass will perform jump threading in some cases where
doing so is trivial and would simplify the CFG. When folding a series
of blocks with redundant conditional branches into an unconditional "critical
edge" block, it does not keep the debug location associated with the previous
conditional branch.
This patch fixes the bug described by copying the debug info from the
old conditional branch to the new unconditional branch instruction, and
adds a regression test for the SimplifyCFG pass that covers this case.
Patch by Stephen Tozer!
Differential Revision: https://reviews.llvm.org/D59206
llvm-svn: 355833
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Following PR39807, the way in which SimplifyCFG hoists common code on
branch paths was fixed in r347782. However this left extra code hanging
around HoistThenElseCodeToIf that wasn't necessary and needlessly
complicated matters -- we no longer need to look up through the 'if'
basic block to find a location for hoisted 'select' insts, we can instead
use the location chosen by applyMergedLocation.
This patch deletes that extra logic, and updates a regression test to
reflect the new logic (selects get the merged location, not a previous
insts location).
Differential Revision: https://reviews.llvm.org/D55272
llvm-svn: 351058
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
We were duplicating code around the existing isImpliedCondition() that
checks for a predecessor block/dominating condition, so make that a
wrapper call.
llvm-svn: 348088
In PR39807 we incorrectly handle circumstances where calls are common'd
from conditional blocks into the parent BB. Calls that can be inlined
must always have DebugLocs, however we strip them during commoning, which
the IR verifier asserts on.
Fix this by using applyMergedLocation: it will perform the same DebugLoc
stripping of conditional Locs, but will also generate an unknown location
DebugLoc that satisfies the requirement for inlinable calls to always have
locations.
Some of the prior logic for selecting a DebugLoc is now likely redundant;
I'll generate a follow-up to remove it (involves editing more regression
tests).
Differential Revision: https://reviews.llvm.org/D54997
llvm-svn: 347782
Add methods to BasicBlock which make it easier to efficiently check
whether a block has N (or more) predecessors.
This can be more efficient than using pred_size(), which is a linear
time operation.
We might consider adding similar methods for successors. I haven't done
so in this patch because succ_size() is already O(1).
With this patch applied, I measured a 0.065% compile-time reduction in
user time for running `opt -O3` on the sqlite3 amalgamation (30 trials).
The change in mergeStoreIntoSuccessor alone saves 45 million linked list
iterations in a stage2 Release build of llc.
See llvm.org/PR39702 for a harder but more general way of achieving
similar results.
Differential Revision: https://reviews.llvm.org/D54686
llvm-svn: 347256
In SimplifyCFG when given a conditional branch that goes to BB1 and BB2, the hoisted common terminator instruction in the two blocks, caused debug line records associated with subsequent select instructions to become ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53390
llvm-svn: 346481
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D53287
llvm-svn: 345250
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
When SimplifyCFG changes the PHI node into a select instruction, the debug line records becomes ambiguous. It causes the debugger to display unreachable source lines.
Differential Revision: https://reviews.llvm.org/D52887
llvm-svn: 344120
Summary:
At some point in the past the recursion in DominatesMergePoint used to pass null for AggressiveInsts as part of the recursion. It no longer does this. So there is no way for AggressiveInsts to be null.
This passes it by reference and removes the null check to make this explicit.
Reviewers: efriedma, reames
Reviewed By: efriedma
Subscribers: xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D52575
llvm-svn: 343828
Summary:
The llvm::SimplifyCFG function creates a SimplifyCFGOpt object and calls run on it. There were numerous places reached from this run function that called back out llvm::SimplifyCFG which would create another SimplifyCFGOpt object. This is an inefficient use of stack space at minimum. We are also not passing along the LoopHeaders pointer passed into the outer llvm::SimplifyCFG call. So if its not null we lose it on the first recursion and get nullptr from there on.
This patch adds an outer loop around the main BasicBlock simplifying code and adds a flag to the SimplifyCFGOpt class that can be set by to request another iteration. I don't think we can iterate based just on the change flag alone since some of the simplifications delete a basic block entirely leaving nothing to iterate on.
Reviewers: bogner, eli.friedman, reames
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52760
llvm-svn: 343816
getNumUses is linear in the number of uses. Since we're looking for a specific use count, we can use hasNUses which will stop as soon as it determines there are more than N uses instead of walking all of them.
llvm-svn: 343550
When SimplifyCFG changes the PHI node into a select instruction, the debug information becomes ambiguous. It causes the debugger to display wrong variable value.
Differential Revision: https://reviews.llvm.org/D51976
llvm-svn: 342527
Previously the alignment on the newly created switch table data was not set,
meaning that DataLayout::getPreferredAlignment was free to overalign it to 16
bytes. This causes unnecessary code bloat.
Differential Revision: https://reviews.llvm.org/D51800
llvm-svn: 342039
This reverts commit r340997.
This change turned out not to be NFC after all, but e.g. causes
clang to crash when building the linux kernel for aarch64.
llvm-svn: 341031
The cost modeling was not accounting for the fact we were duplicating the instruction once per predecessor. With a default threshold of 1, this meant we were actually creating #pred copies.
Adding to the fun, there is *absolutely no* test coverage for this. Simply bailing for more than one predecessor passes all checked in tests.
llvm-svn: 341001
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
Summary:
Previously, `eraseFromParent()` calls `delete` which invalidates the value of the pointer. Copying the value of the pointer later is undefined behavior in C++11 and implementation-defined (which may cause a segfault on implementations having strict pointer safety) in C++14.
This patch removes the BasicBlock pointer from related SmallPtrSet before `delete` invalidates it in the SimplifyCFG pass.
Reviewers: kuhar, dmgreen, davide, trentxintong
Reviewed By: kuhar, dmgreen
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50717
llvm-svn: 339773
Summary:
Support for this option is needed for building Linux kernel.
This is a very frequently requested feature by kernel developers.
More details : https://lkml.org/lkml/2018/4/4/601
GCC option description for -fdelete-null-pointer-checks:
This Assume that programs cannot safely dereference null pointers,
and that no code or data element resides at address zero.
-fno-delete-null-pointer-checks is the inverse of this implying that
null pointer dereferencing is not undefined.
This feature is implemented in LLVM IR in this CL as the function attribute
"null-pointer-is-valid"="true" in IR (Under review at D47894).
The CL updates several passes that assumed null pointer dereferencing is
undefined to not optimize when the "null-pointer-is-valid"="true"
attribute is present.
Reviewers: t.p.northover, efriedma, jyknight, chandlerc, rnk, srhines, void, george.burgess.iv
Reviewed By: efriedma, george.burgess.iv
Subscribers: eraman, haicheng, george.burgess.iv, drinkcat, theraven, reames, sanjoy, xbolva00, llvm-commits
Differential Revision: https://reviews.llvm.org/D47895
llvm-svn: 336613
Currently SmallSet<PointerTy> inherits from SmallPtrSet<PointerTy>. This
patch replaces such types with SmallPtrSet, because IMO it is slightly
clearer and allows us to get rid of unnecessarily including SmallSet.h
Reviewers: dblaikie, craig.topper
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D47836
llvm-svn: 334492
SmallSet forwards to SmallPtrSet for pointer types. SmallPtrSet supports iteration, but a normal SmallSet doesn't. So if it wasn't for the forwarding, this wouldn't work.
These places were found by hiding the begin/end methods in the SmallSet forwarding
llvm-svn: 334343
Review feedback from r328165. Split out just the one function from the
file that's used by Analysis. (As chandlerc pointed out, the original
change only moved the header and not the implementation anyway - which
was fine for the one function that was used (since it's a
template/inlined in the header) but not in general)
llvm-svn: 333954
Summary:
Fix a case where FoldBranchToCommonDest() would bail out from doing CSE
when encountering a debug intrinsic. Handle that by skipping past the
debug intrinsics.
Also, as a minor refactoring, rename checkCSEInPredecessor() to
tryCSEWithPredecessor() to make it a bit more clear that the function
may remove instructions.
Reviewers: fhahn, craig.topper, dblaikie, xbolva00
Reviewed By: fhahn, xbolva00
Subscribers: vsk, davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D46635
llvm-svn: 332698
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
This commit adds a wrapper for std::distance() which works with ranges.
As it would be a common case to write `distance(predecessors(BB))`, this
also introduces `pred_size()` and `succ_size()` helpers to make that
easier to write.
Differential Revision: https://reviews.llvm.org/D46668
llvm-svn: 332057
In order to set breakpoints on labels and list source code around
labels, we need collect debug information for labels, i.e., label
name, the function label belong, line number in the file, and the
address label located. In order to keep these information in LLVM
IR and to allow backend to generate debug information correctly.
We create a new kind of metadata for labels, DILabel. The format
of DILabel is
!DILabel(scope: !1, name: "foo", file: !2, line: 3)
We hope to keep debug information as much as possible even the
code is optimized. So, we create a new kind of intrinsic for label
metadata to avoid the metadata is eliminated with basic block.
The intrinsic will keep existing if we keep it from optimized out.
The format of the intrinsic is
llvm.dbg.label(metadata !1)
It has only one argument, that is the DILabel metadata. The
intrinsic will follow the label immediately. Backend could get the
label metadata through the intrinsic's parameter.
We also create DIBuilder API for labels to be used by Frontend.
Frontend could use createLabel() to allocate DILabel objects, and use
insertLabel() to insert llvm.dbg.label intrinsic in LLVM IR.
Differential Revision: https://reviews.llvm.org/D45024
Patch by Hsiangkai Wang.
llvm-svn: 331841
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
This patch updates some code responsible the skip debug info to use
BasicBlock::instructionsWithoutDebug. I think this makes things slightly
simpler and more direct.
Reviewers: aprantl, vsk, hans, danielcdh
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D46252
llvm-svn: 331221
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: kcc, pcc, danielcdh, jmolloy, sanjoy, dberlin, ruiu
Reviewed By: ruiu
Subscribers: ruiu, llvm-commits
Differential Revision: https://reviews.llvm.org/D45142
llvm-svn: 330059
Summary:
Currently merge conditional stores can't handle cases where PostBB (the block we need to move the store to) has more than 2 predecessors.
This patch removes that restriction by creating a new block with only the 2 predecessors we care about and an unconditional branch to the original block. This provides a place to put the store.
Reviewers: efriedma, jmolloy, ABataev
Reviewed By: efriedma
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39760
llvm-svn: 329142
Summary:
When building with libFuzzer, converting control flow to selects or
obscuring the original operands of CMPs reduces the effectiveness of
libFuzzer's heuristics.
This patch provides an attribute to disable or modify certain optimizations
for optimal fuzzing signal.
Provides a less aggressive alternative to https://reviews.llvm.org/D44057.
Reviewers: vitalybuka, davide, arsenm, hfinkel
Reviewed By: vitalybuka
Subscribers: junbuml, mehdi_amini, wdng, javed.absar, hiraditya, llvm-commits, kcc
Differential Revision: https://reviews.llvm.org/D44232
llvm-svn: 328214
Remove #include of Transforms/Scalar.h from Transform/Utils to fix layering.
Transforms depends on Transforms/Utils, not the other way around. So
remove the header and the "createStripGCRelocatesPass" function
declaration (& definition) that is unused and motivated this dependency.
Move Transforms/Utils/Local.h into Analysis because it's used by
Analysis/MemoryBuiltins.cpp.
llvm-svn: 328165
When hoisting common code from the "then" and "else" branches of a condition
to before the "if", the HoistThenElseCodeToIf routine will attempt to merge
the debug location associated with the two original copies of the hoisted
instruction.
This is a problem in the special case where the hoisted instruction is a
debug info intrinsic, since for those the debug location is considered
part of the intrinsic and attempting to modify it may resut in invalid
IR. This is the underlying cause of PR36410.
This patch fixes the problem by handling debug info intrinsics specially:
instead of hoisting one copy and merging the two locations, the code now
simply hoists both copies, each with its original location intact. Note
that this is still only done in the case where both original copies are
otherwise (i.e. apart from location metadata) identical.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D44312
llvm-svn: 327622
When hoisting common code from the "then" and "else" branches of a condition
to before the "if", there is no need to require that debug intrinsics match
before moving them (and merging them). Instead, we can simply always keep
all debug intrinsics from both sides of the "if".
This fixes PR36410, which describes a problem where as a result of the attempt
to merge debug locations for two debug intrinsics we end up with an invalid
intrinsic, where the scope indicated in the !dbg location no longer matches
the scope of the variable tracked by the intrinsic.
In addition, this has the benefit that we no longer throw away information
that is actually still valid, helping to generate better debug data.
Reviewed By: vsk
Differential Revision: https://reviews.llvm.org/D44312
llvm-svn: 327175
The commit rL308422 introduces a restriction for folding unconditional
branches. Specifically if empty block with unconditional branch leads to
header of the loop then elimination of this basic block is prohibited.
However it seems this condition is redundantly strict.
If elimination of this basic block does not introduce more back edges
then we can eliminate this block.
The patch implements this relax of restriction.
The test profile/Linux/counter_promo_nest.c in compiler-rt project
is updated to meet this change.
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: pacxx
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42691
llvm-svn: 324572
The patch causes the failure of the test
compiler-rt/test/profile/Linux/counter_promo_nest.c
To unblock buildbot, revert the patch while investigation is in progress.
Differential Revision: https://reviews.llvm.org/D42691
llvm-svn: 324214
The commit rL308422 introduces a restriction for folding unconditional
branches. Specifically if empty block with unconditional branch leads to
header of the loop then elimination of this basic block is prohibited.
However it seems this condition is redundantly strict.
If elimination of this basic block does not introduce more back edges
then we can eliminate this block.
The patch implements this relax of restriction.
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: pacxx
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D42691
llvm-svn: 324208
The function can take a significant amount of time on some
complicated test cases, but for the currently only use of
the function we can stop the initialization much earlier
when we find out we are going to discard the result anyway
in the caller of the function.
Adding configurable cut-off points so that we avoid wasting time.
NFCI.
llvm-svn: 322248
If after if-conversion, most of the instructions in this new BB construct a long and slow dependence chain, it may be slower than cmp/branch, even if the branch has a high miss rate, because the control dependence is transformed into data dependence, and control dependence can be speculated, and thus, the second part can execute in parallel with the first part on modern OOO processor.
This patch checks for the long dependence chain, and give up if-conversion if find one.
Differential Revision: https://reviews.llvm.org/D39352
llvm-svn: 321377
If a block has N predecessors, then the current algorithm will try to
sink common code to this block N times (whenever we visit a
predecessor). Every attempt to sink the common code includes going
through all predecessors, so the complexity of the algorithm becomes
O(N^2).
With this patch we try to sink common code only when we visit the block
itself. With this, the complexity goes down to O(N).
As a side effect, the moment the code is sunk is slightly different than
before (the order of simplifications has been changed), that's why I had
to adjust two tests (note that neither of the tests is supposed to test
SimplifyCFG):
* test/CodeGen/AArch64/arm64-jumptable.ll - changes in this test mimic
the changes that previous implementation of SimplifyCFG would do.
* test/CodeGen/ARM/avoid-cpsr-rmw.ll - in this test I disabled common
code sinking by a command line flag.
llvm-svn: 321236
This should solve:
https://bugs.llvm.org/show_bug.cgi?id=34603
...by preventing SimplifyCFG from altering redundant instructions before early-cse has a chance to run.
It changes the default (canonical-forming) behavior of SimplifyCFG, so we're only doing the
sinking transform later in the optimization pipeline.
Differential Revision: https://reviews.llvm.org/D38566
llvm-svn: 320749
Summary:
A true or false result is expected from a comparison, but it seems the possibility of undef was overlooked, which could lead to a failed assert. This is fixed by this patch by bailing out if we encounter undef.
The bug is old and the assert has been there since the end of 2014, so it seems this is unusual enough to forego optimization.
Patch by JesperAntonsson.
Reviewers: spatel, eeckstein, hans
Reviewed By: hans
Subscribers: uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D40639
llvm-svn: 319768
Summary:
A true or false result is expected from a comparison, but it seems the possibility of undef was overlooked, which could lead to a failed assert. This is fixed by this patch by bailing out if we encounter undef.
The bug is old and the assert has been there since the end of 2014, so it seems this is unusual enough to forego optimization.
Patch by: JesperAntonsson
Reviewers: spatel, eeckstein, hans
Reviewed By: hans
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D40639
llvm-svn: 319537
Summary:
This wrapper checks if there is at least one non-zero weight before
setting the metadata.
Reviewers: davidxl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39872
llvm-svn: 317845
Merging conditional stores tries to check to see if the code is if convertible after the store is moved. But the store hasn't been moved yet so its being counted against the threshold.
The patch adds 1 to the threshold comparison to make sure we don't count the store. I've adjusted a test to use a lower threshold to ensure we still do that conversion with the lower threshold.
Differential Revision: https://reviews.llvm.org/D39570
llvm-svn: 317368
Summary:
SpeculativelyExecuteBB can flatten the CFG by doing
speculative execution followed by a select instruction.
When the speculatively executed BB contained dbg intrinsics
the result could be a little bit weird, since those dbg
intrinsics were inserted before the select in the flattened
CFG. So when single stepping in the debugger, printing the
value of the variable referenced in the dbg intrinsic, it
could happen that it looked like the variable had values
that never actually were assigned to the variable.
This patch simply discards all dbg intrinsics that were found
in the speculatively executed BB.
Reviewers: aprantl, chandlerc, craig.topper
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D39494
llvm-svn: 317198
Currently the selects are created with the names of their inputs concatenated together. It's possible to get cases that chain these selects together resulting in long names due to multiple levels of concatenation. Our internal branch of llvm managed to generate names over 100000 characters in length on a particular test due to an extreme compounding of the names.
This patch changes the name to a generic name that is not dependent on its inputs.
Differential Revision: https://reviews.llvm.org/D39440
llvm-svn: 317024
As discussed in D39011:
https://reviews.llvm.org/D39011
...replacing constants with a variable is inverting the transform done
by other IR passes, so we definitely don't want to do this early.
In fact, it's questionable whether this transform belongs in SimplifyCFG
at all. I'll look at moving this to codegen as a follow-up step.
llvm-svn: 316298
The missed canonicalization/optimization in the motivating test from PR34471 leads to very different codegen:
int switcher(int x) {
switch(x) {
case 17: return 17;
case 19: return 19;
case 42: return 42;
default: break;
}
return 0;
}
int comparator(int x) {
if (x == 17) return 17;
if (x == 19) return 19;
if (x == 42) return 42;
return 0;
}
For the first example, we use a bit-test optimization to avoid a series of compare-and-branch:
https://godbolt.org/g/BivDsw
Differential Revision: https://reviews.llvm.org/D39011
llvm-svn: 316293
This is a follow-up to https://reviews.llvm.org/D38138.
I fixed the capitalization of some functions because we're changing those
lines anyway and that helped verify that we weren't accidentally dropping
any options by using default param values.
llvm-svn: 314930
Summary: If the merged instruction is call instruction, we need to set the scope to the closes common scope between 2 locations, otherwise it will cause trouble when the call is getting inlined.
Reviewers: dblaikie, aprantl
Reviewed By: dblaikie, aprantl
Subscribers: llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D37877
llvm-svn: 314694
This was intended to be no-functional-change, but it's not - there's a test diff.
So I thought I should stop here and post it as-is to see if this looks like what was expected
based on the discussion in PR34603:
https://bugs.llvm.org/show_bug.cgi?id=34603
Notes:
1. The test improvement occurs because the existing 'LateSimplifyCFG' marker is not carried
through the recursive calls to 'SimplifyCFG()->SimplifyCFGOpt().run()->SimplifyCFG()'.
The parameter isn't passed down, so we pick up the default value from the function signature
after the first level. I assumed that was a bug, so I've passed 'Options' down in all of the
'SimplifyCFG' calls.
2. I split 'LateSimplifyCFG' into 2 bits: ConvertSwitchToLookupTable and KeepCanonicalLoops.
This would theoretically allow us to differentiate the transforms controlled by those params
independently.
3. We could stash the optional AssumptionCache pointer and 'LoopHeaders' pointer in the struct too.
I just stopped here to minimize the diffs.
4. Similarly, I stopped short of messing with the pass manager layer. I have another question that
could wait for the follow-up: why is the new pass manager creating the pass with LateSimplifyCFG
set to true no matter where in the pipeline it's creating SimplifyCFG passes?
// Create an early function pass manager to cleanup the output of the
// frontend.
EarlyFPM.addPass(SimplifyCFGPass());
-->
/// \brief Construct a pass with the default thresholds
/// and switch optimizations.
SimplifyCFGPass::SimplifyCFGPass()
: BonusInstThreshold(UserBonusInstThreshold),
LateSimplifyCFG(true) {} <-- switches get converted to lookup tables and loops may not be in canonical form
If this is unintended, then it's possible that the current behavior of dropping the 'LateSimplifyCFG'
setting via recursion was masking this bug.
Differential Revision: https://reviews.llvm.org/D38138
llvm-svn: 314308
I noticed this inefficiency while investigating PR34603:
https://bugs.llvm.org/show_bug.cgi?id=34603
This fix will likely push another bug (we don't maintain state of 'LateSimplifyCFG')
into hiding, but I'll try to clean that up with a follow-up patch anyway.
llvm-svn: 313829
Summary:
If SimplifyCFG pass is able to merge conditional stores into single one,
it loses the alignment. This may lead to incorrect codegen. Patch
sets the alignment of the new instruction if it is set in the original
one.
Reviewers: jmolloy
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D36841
llvm-svn: 312030
Summary: When we move then-else code to if, we need to merge its debug info, otherwise the hoisted instruction may have inaccurate debug info attached.
Reviewers: aprantl, probinson, dblaikie, echristo, loladiro
Reviewed By: aprantl
Subscribers: sanjoy, llvm-commits
Differential Revision: https://reviews.llvm.org/D36778
llvm-svn: 310985
Summary:
When simplifying unconditional branches from empty blocks, we pre-test if the
BB belongs to a set of loop headers and keep the block to prevent passes from
destroying canonical loop structure. However, the current algorithm fails if
the destination of the branch is a loop header. Especially when such a loop's
latch block is folded into loop header it results in additional backedges and
LoopSimplify turns it into a nested loop which prevent later optimizations
from being applied (e.g., loop unrolling and loop interleaving).
This patch augments the existing algorithm by further checking if the
destination of the branch belongs to a set of loop headers and defer
eliminating it if yes to LateSimplifyCFG.
Fixes PR33605: https://bugs.llvm.org/show_bug.cgi?id=33605
Reviewers: efriedma, mcrosier, pacxx, hsung, davidxl
Reviewed By: efriedma
Subscribers: ashutosh.nema, gberry, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D35411
llvm-svn: 308422
Summary: In this code we got to Dom by following the predecessor link of BB. So it stands to reason that BB should also show up as a successor of Dom's terminator right? There isn't a way to have the CFG connect in only one direction is there?
Reviewers: jmolloy, davide, mcrosier
Reviewed By: mcrosier
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D35025
llvm-svn: 307276
This patch appends the name of the function to the switch generated lookup
table. This will ease the visual debugging in identifying the function the table
is generated from.
Differential Revision: https://reviews.llvm.org/D34817
llvm-svn: 306867
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This patch provides an initial prototype for a pass that sinks instructions based on GVN information, similar to GVNHoist. It is not yet ready for commiting but I've uploaded it to gather some initial thoughts.
This pass attempts to sink instructions into successors, reducing static
instruction count and enabling if-conversion.
We use a variant of global value numbering to decide what can be sunk.
Consider:
[ %a1 = add i32 %b, 1 ] [ %c1 = add i32 %d, 1 ]
[ %a2 = xor i32 %a1, 1 ] [ %c2 = xor i32 %c1, 1 ]
\ /
[ %e = phi i32 %a2, %c2 ]
[ add i32 %e, 4 ]
GVN would number %a1 and %c1 differently because they compute different
results - the VN of an instruction is a function of its opcode and the
transitive closure of its operands. This is the key property for hoisting
and CSE.
What we want when sinking however is for a numbering that is a function of
the *uses* of an instruction, which allows us to answer the question "if I
replace %a1 with %c1, will it contribute in an equivalent way to all
successive instructions?". The (new) PostValueTable class in GVN provides this
mapping.
This pass has some shown really impressive improvements especially for codesize already on internal benchmarks, so I have high hopes it can replace all the sinking logic in SimplifyCFG.
Differential revision: https://reviews.llvm.org/D24805
llvm-svn: 303850
This continues the changes started when computeSignBit was replaced with this new version of computeKnowBits.
Differential Revision: https://reviews.llvm.org/D33431
llvm-svn: 303773
Summary:
Implements PR889
Removing the virtual table pointer from Value saves 1% of RSS when doing
LTO of llc on Linux. The impact on time was positive, but too noisy to
conclusively say that performance improved. Here is a link to the
spreadsheet with the original data:
https://docs.google.com/spreadsheets/d/1F4FHir0qYnV0MEp2sYYp_BuvnJgWlWPhWOwZ6LbW7W4/edit?usp=sharing
This change makes it invalid to directly delete a Value, User, or
Instruction pointer. Instead, such code can be rewritten to a null check
and a call Value::deleteValue(). Value objects tend to have their
lifetimes managed through iplist, so for the most part, this isn't a big
deal. However, there are some places where LLVM deletes values, and
those places had to be migrated to deleteValue. I have also created
llvm::unique_value, which has a custom deleter, so it can be used in
place of std::unique_ptr<Value>.
I had to add the "DerivedUser" Deleter escape hatch for MemorySSA, which
derives from User outside of lib/IR. Code in IR cannot include MemorySSA
headers or call the MemoryAccess object destructors without introducing
a circular dependency, so we need some level of indirection.
Unfortunately, no class derived from User may have any virtual methods,
because adding a virtual method would break User::getHungOffOperands(),
which assumes that it can find the use list immediately prior to the
User object. I've added a static_assert to the appropriate OperandTraits
templates to help people avoid this trap.
Reviewers: chandlerc, mehdi_amini, pete, dberlin, george.burgess.iv
Reviewed By: chandlerc
Subscribers: krytarowski, eraman, george.burgess.iv, mzolotukhin, Prazek, nlewycky, hans, inglorion, pcc, tejohnson, dberlin, llvm-commits
Differential Revision: https://reviews.llvm.org/D31261
llvm-svn: 303362
Previously SimplifyCFG used getSetSize which returns an APInt that is 1 bit wider than the ConstantRange's bit width. In the reasonably common case that the ConstantRange is 64-bits wide, this requires returning a 65-bit APInt. APInt's can only store 64-bits without a memory allocation so this is inefficient.
The new method takes the 8 as an input and tells if the range contains more than that many elements without requiring any wider math.
llvm-svn: 302385
This patch introduces a new KnownBits struct that wraps the two APInt used by computeKnownBits. This allows us to treat them as more of a unit.
Initially I've just altered the signatures of computeKnownBits and InstCombine's simplifyDemandedBits to pass a KnownBits reference instead of two separate APInt references. I'll do similar to the SelectionDAG version of computeKnownBits/simplifyDemandedBits as a separate patch.
I've added a constructor that allows initializing both APInts to the same bit width with a starting value of 0. This reduces the repeated pattern of initializing both APInts. Once place default constructed the APInts so I added a default constructor for those cases.
Going forward I would like to add more methods that will work on the pairs. For example trunc, zext, and sext occur on both APInts together in several places. We should probably add a clear method that can be used to clear both pieces. Maybe a method to check for conflicting information. A method to return (Zero|One) so we don't write it out everywhere. Maybe a method for (Zero|One).isAllOnesValue() to determine if all bits are known. I'm sure there are many other methods we can come up with.
Differential Revision: https://reviews.llvm.org/D32376
llvm-svn: 301432
This patch uses various APInt methods to reduce temporary APInt creation.
This should be all of the unrelated cleanups that got buried in D32376(creating a KnownBits struct) as well as some pointed out by Simon during the review of that. Plus a few improvements to use counting instead of masking.
I've left out any places where we do something like (KnownZero & KnownOne) != 0 as I plan to add a helper method to KnownBits to ask that question and didn't want to thrash that code an additional time.
Differential Revision: https://reviews.llvm.org/D32495
llvm-svn: 301338
Currently we choose PostBB as the single successor of QFB, but its possible that QTB's single successor is QFB which would make QFB the correct choice.
Differential Revision: https://reviews.llvm.org/D32323
llvm-svn: 300992
The use list is a linked list so getNumUses requires a linear scan through the whole list. hasNUses will stop scanning at N and see if that is the end.
llvm-svn: 300505
and to expose a handle to represent the actual case rather than having
the iterator return a reference to itself.
All of this allows the iterator to be used with common STL facilities,
standard algorithms, etc.
Doing this exposed some missing facilities in the iterator facade that
I've fixed and required some work to the actual iterator to fully
support the necessary API.
Differential Revision: https://reviews.llvm.org/D31548
llvm-svn: 300032
The first variant contains all current transformations except
transforming switches into lookup tables. The second variant
contains all current transformations.
The switch-to-lookup-table conversion results in code that is more
difficult to analyze and optimize by other passes. Most importantly,
it can inhibit Dead Code Elimination. As such it is often beneficial to
only apply this transformation very late. A common example is inlining,
which can often result in range restrictions for the switch expression.
Changes in execution time according to LNT:
SingleSource/Benchmarks/Misc/fp-convert +3.03%
MultiSource/Benchmarks/ASC_Sequoia/CrystalMk/CrystalMk -11.20%
MultiSource/Benchmarks/Olden/perimeter/perimeter -10.43%
and a couple of smaller changes. For perimeter it also results 2.6%
a smaller binary.
Differential Revision: https://reviews.llvm.org/D30333
llvm-svn: 298799
This moves it to the iterator facade utilities giving it full random
access semantics, etc. It can also now be used with standard algorithms
like std::all_of and std::any_of and range adaptors like llvm::reverse.
Also make the semantics of iterating match what every other iterator
uses and forbid decrementing past the begin iterator. This was used as
a hacky way to work around iterator invalidation. However, every
instance trying to do this failed to actually avoid touching invalid
iterators despite the clear documentation that the removed and all
subsequent iterators become invalid including the end iterator. So I've
added a return of the next iterator to removeCase and rewritten the
loops that were doing this to correctly follow the iterator pattern of
either incremneting or removing and assigning fresh values to the
iterator and the end.
In one case we were trying to go backwards to make this cleaner but it
doesn't actually work. I've made that code match the code we use
everywhere else to remove cases as we iterate. This changes the order of
cases in one test output and I moved that test to CHECK-DAG so it
wouldn't care -- the order isn't semantically meaningful anyways.
llvm-svn: 298791
Summary: Along with https://reviews.llvm.org/D27804, debug locations need to be merged when hoisting store instructions as well. Not sure if just dropping debug locations would make more sense for this case, but as the branch instruction will have at least different discriminator with the hoisted store instruction, I think there will be no difference in practice.
Reviewers: aprantl, andreadb, danielcdh
Reviewed By: aprantl
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29062
llvm-svn: 293372
Conservatively disable sinking and merging inline-asm instructions as doing so
can potentially create arguments that cannot satisfy the inline-asm constraints.
For example, SimplifyCFG used to do the following transformation:
(before)
if.then:
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 8)
br label %if.end
if.else:
%1 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 6)
br label %if.end
(after)
%.sink = select i1 %tobool, i32 6, i32 8
%0 = call i32 asm "rorl $2, $0", "=&r,0,n"(i32 %r6, i32 %.sink)
This would result in a crash in the backend since only immediate integer operands
are permitted for constraint "n".
rdar://problem/30110806
Differential Revision: https://reviews.llvm.org/D29111
llvm-svn: 293025
This reapplies r289828 (reverted in r289833 as it broke the address sanitizer). The
debugloc is now only set when the instruction is not a call, as this causes the
verifier to assert (the inliner requires an inlinable callsite to have a debug loc
if the caller and callee have debug info).
Original commit message:
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Original review: https://reviews.llvm.org/D27590
llvm-svn: 290973
Now that a new API to merge debug locations has been committed at r289661 (see
review D26256 for more details), we can use it to "improve" the code added by
revision r280995.
Instead of nulling the debugloc of a commoned instruction, we use the 'merged'
debug location. At the moment, this is just a no functional change since
function `DILocation::getMergedLocation()` is just a stub and would always
return a null location.
Differential Revision: https://reviews.llvm.org/D27804
llvm-svn: 289862
Simplify CFG will try to sink the last instruction in a series of basic blocks,
creating a "common" instruction in the successor block (sinkLastInstruction).
When it does this, the debug location of the single instruction should be the
merged debug locations of the commoned instructions.
Differential Revision: https://reviews.llvm.org/D27590
llvm-svn: 289828
After r289755, the AssumptionCache is no longer needed. Variables affected by
assumptions are now found by using the new operand-bundle-based scheme. This
new scheme is more computationally efficient, and also we need much less
code...
llvm-svn: 289756
Instead, expose whether the current type is an array or a struct, if an array
what the upper bound is, and if a struct the struct type itself. This is
in preparation for a later change which will make PointerType derive from
Type rather than SequentialType.
Differential Revision: https://reviews.llvm.org/D26594
llvm-svn: 288458
Summary: Debug info should *not* affect code generation. This patch properly handles debug info to make sure the generated code are the same with or without debug info.
Reviewers: davidxl, mzolotukhin, jmolloy
Subscribers: aprantl, llvm-commits
Differential Revision: https://reviews.llvm.org/D25286
llvm-svn: 284415
Not all ConstantExprs can be represented by a global variable, for example most
pointer arithmetic other than addition of a constant, so we can't convert these
values from switch statements to lookup tables.
Differential Revision: https://reviews.llvm.org/D25550
llvm-svn: 284379
BasicBlock::size is O(insts), making this loop O(blocks*insts), which
can be really slow on generated code. getPrevNode already checks if
we're at the beginning of the block and returns nullptr if so, just use
that instead. No functionality change intended.
llvm-svn: 284303
Summary:
Constant bundle operands may need to retain their constant-ness for
correctness. I'll admit that this is slightly odd, but it looks like
SimplifyCFG already does this for things like @llvm.frameaddress and
@llvm.stackmap, so I suppose adding one more case is not a big deal.
It is possible to add a mechanism to denote bundle operands that need to
remain constants, but that's probably too complicated for the time
being.
Reviewers: jmolloy
Subscribers: mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D25502
llvm-svn: 284028
With the ROPI and RWPI relocation models we can't always have pointers
to global data or functions in constant data, so don't try to convert switches
into lookup tables if any value in the lookup table would require a relocation.
We can still safely emit lookup tables of other values, such as simple
constants.
Differential Revision: https://reviews.llvm.org/D24462
llvm-svn: 283530
GetCaseResults assumed that a terminator with one successor was an
unconditional branch. This is not necessarily the case, it could be a
cleanupret.
Strengthen the check by querying whether or not the terminator is
exceptional.
llvm-svn: 283517
We were updating metadata but not IR flags. Because we pick an arbitrary instruction to be the CSE candidate, it comes down to luck (50% or less chance) if this results in broken codegen or not, which is why PR30373 which is actually not the fault of the commit it was bisected down to.
Fixes PR30373.
llvm-svn: 281889
This should *actually* fix PR30244. This cranks up the workaround for PR30188 so that we never sink loads or stores of allocas.
The idea is that these should be removed by SROA/Mem2Reg, and any movement of them may well confuse SROA or just cause unwanted code churn. It's not ideal that the midend should be crippled like this, but that unwanted churn can really cause significant regressions in important workloads (tsan).
llvm-svn: 281162
Roman Lebedev