This appears to have some issues associated with the file directive output
causing multiple global symbols with the name "file" to be emitted into a
startup section. I'm investigating more specific causes and working with the
original author.
This reverts commit r330271.
Also Revert "[DEBUGINFO, NVPTX] Add the test for the debug info of the local"
This reverts commit r330592 and the follow up of 330779 as the testcase is dependent upon r330271.
llvm-svn: 331237
Summary:
This patch will introduce copying of DBG_VALUE instructions
from an otherwise empty basic block to predecessor/successor
blocks in case the empty block is eliminated/bypassed. It
is currently only done in one identified situation in the
BranchFolding pass, before optimizing on empty block.
It can be seen as a light variant of the propagation done
by the LiveDebugValues pass, which unfortunately is executed
after the BranchFolding pass.
We only propagate (copy) DBG_VALUE instructions in a limited
number of situations:
a) If the empty BB is the only predecessor of a successor
we can copy the DBG_VALUE instruction to the beginning of
the successor (because the DBG_VALUE instruction is always
part of the flow between the blocks).
b) If the empty BB is the only successor of a predecessor
we can copy the DBG_VALUE instruction to the end of the
predecessor (because the DBG_VALUE instruction is always
part of the flow between the blocks). In this case we add
the DBG_VALUE just before the first terminator (assuming
that the terminators do not impact the DBG_VALUE).
A future solution, to handle more situations, could perhaps
be to run the LiveDebugValues pass before branch folding?
This fix is related to PR37234. It is expected to resolve
the problem seen, when applied together with the fix in
SelectionDAG from here: https://reviews.llvm.org/D46129
Reviewers: #debug-info, aprantl, rnk
Reviewed By: #debug-info, aprantl
Subscribers: ormris, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D46184
llvm-svn: 331183
Summary:
When building the selection DAG at ISel all PHI nodes are
selected and lowered to Machine Instruction PHI nodes before
we start to create any SDNodes. So there are no SDNodes for
values produced by the PHI nodes.
In the past when selecting a dbg.value intrinsic that uses
the value produced by a PHI node we have been handling such
dbg.value intrinsics as "dangling debug info". I.e. we have
not created a SDDbgValue node directly, because there is
no existing SDNode for the PHI result, instead we deferred
the creationg of a SDDbgValue until we found the first use
of the PHI result.
The old solution had a couple of flaws. The position of the
selected DBG_VALUE instruction would end up quite late in a
basic block, and for example not directly after the PHI node
as in the LLVM IR input. And in case there were no use at all
in the basic block the dbg.value could be dropped completely.
This patch introduces a new VREG kind of SDDbgValue nodes.
It is similar to a SDNODE kind of node, but it refers directly
to a virtual register and not a SDNode. When we do selection
for a dbg.value that is using the result of a PHI node we
can do a lookup of the virtual register directly (as it already
is determined for the PHI node) and create a SDDbgValue node
immediately instead of delaying the selection until we find a
use.
This should fix a problem with losing debug info at ISel
as seen in PR37234 (https://bugs.llvm.org/show_bug.cgi?id=37234).
It does not resolve PR37234 completely, because the debug info
is dropped later on in the BranchFolder (see D46184).
Reviewers: #debug-info, aprantl
Reviewed By: #debug-info, aprantl
Subscribers: rnk, gbedwell, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D46129
llvm-svn: 331182
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
This reapplies r330970 after fixing an uncovered bug in r331086 and
working around the situation caused by it.
llvm-svn: 331090
For local variables the first DW_OP_deref is consumed by turning the
location kind into a memeory location, but that only makes sense for
values that are in a register to begin with, which cannot happen for
global variables that are attached to a symbol.
rdar://problem/39741860
llvm-svn: 330970
Debug var, expr and loc were only supported for non-fixed stack objects.
This patch adds the following fields to the "fixedStack:" entries, and
renames the ones from "stack:" to:
* debug-info-variable
* debug-info-expression
* debug-info-location
Differential Revision: https://reviews.llvm.org/D46032
llvm-svn: 330859
Updated two more debug line related warnings to use WithColor. This was
necessary to ensure consistent output order of the warnings on Windows
for debug line tests.
Differential Revision: https://reviews.llvm.org/D45871
llvm-svn: 330440
On Windows, %llc_dwarf automatically adds -mtriple causing this test to
error. Changed %llc_dwarf to llc.
Differential Revision: https://reviews.llvm.org/D45869
llvm-svn: 330414
Summary:
Patch adds initial emission of the debug info for NVPTX target.
Currently, only .file and .loc directives are emitted, everything else is
commented out to not break the compilation of Cuda.
Reviewers: echristo, jlebar, tra, jholewinski
Subscribers: mgorny, aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D41827
llvm-svn: 330271
It seems llc crashes when targetting darwin with split-dwarf (pr37164).
This happens on all inputs, not just the one I added in the above
commit. Work around the issue by hardcoding the target triple to linux,
which is what all split-dwarf tests seem to be doing.
As I don't know of a way to specify the os part of the triple without
spelling out the architecture as well, I move the new test to the X86
folder.
llvm-svn: 330265
Summary:
Previously we crashed for the combination of the two features because we
tried to reference the dwo CU from the main object file. The fix
consists of two items:
- reference the skeleton CU from the name index (the consumer is
expected to use the skeleton CU to find the real data).
- use the main object file string pool for the strings in the index
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45566
llvm-svn: 330249
Summary:
When sinking an instruction in InstCombine we now also sink
the DbgInfoIntrinsics that are using the sunken value.
Example)
When sinking the load in this input
bb.X:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
br label %for.body
we now also move the dbg.value, like this
bb.X:
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br label %for.body
In the past we haven't moved the dbg.value so we got
bb.X:
tail call void @llvm.dbg.value(metadata i64 %0, ...)
br i1 %cond, label %for.end, label %for.body.lr.ph
for.body.lr.ph:
%0 = load i64, i64* %start, align 4, !dbg !31
br label %for.body
So in the past we got a debug-use before the def of %0.
And that dbg.value was also on the path jumping to %for.end, for
which %0 never was defined.
CodeGenPrepare normally comes to rescue later (when not moving
the dbg.value), since it moves dbg.value instrinsics quite
brutally, without really analysing if it is correct to move
the intrinsic (see PR31878).
So at the moment this patch isn't expected to have much impact,
besides that it is moving the dbg.value already in opt, making
the IR look more sane directly.
This can be seen as a preparation to (hopefully) make it possible
to turn off CodeGenPrepare::placeDbgValues later as a solution
to PR31878.
I also adjusted test/DebugInfo/X86/sdagsplit-1.ll to make the
IR in the test case up-to-date with this behavior in InstCombine.
Reviewers: rnk, vsk, aprantl
Reviewed By: vsk, aprantl
Subscribers: mattd, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D45425
llvm-svn: 330243
The DBI stream contains a list of module descriptors. At the
beginning of each descriptor is a structure representing the first
section contribution in the output file for that module. LLD
currently doesn't fill out this structure at all, but link.exe
does. So as a precursor to emitting this data in LLD, we first
need a way to dump it so that it can be checked.
This patch adds support for the dumping, and verifies via a test
that LLD emits bogus information.
llvm-svn: 330208
Apparently, DebugInfoFinder::processCompileUnit doesn't process all
of the possible kinds of DIImportedEntit'ies, e.g. DIGlobalVariable's.
Previously introduced `llvm_unreachable` is therefore incorrect.
Removing it here.
llvm-svn: 330167
When emitting CodeView debug information, compiler-generated thunk routines
should be emitted using S_THUNK32 symbols instead of S_GPROC32_ID symbols so
Visual Studio can properly step into the user code. This initial support only
handles standard thunk ordinals.
Differential Revision: https://reviews.llvm.org/D43838
llvm-svn: 330132
As demonstrated by the regression tests added in this patch, the
following cases are valid cases:
1. A Function with no DISubprogram attached, but various debug info
related to its instructions, coming, for instance, from an inlined
function, also defined somewhere else in the same module;
2. ... or coming exclusively from the functions inlined and eliminated
from the module entirely.
The ValueMap shared between CloneFunctionInto calls within CloneModule
needs to contain identity mappings for all of the DISubprogram's to
prevent them from being duplicated by MapMetadata / RemapInstruction
calls, this is achieved via DebugInfoFinder collecting all the
DISubprogram's. However, CloneFunctionInto was missing calls into
DebugInfoFinder for functions w/o DISubprogram's attached, but still
referring DISubprogram's from within (case 1). This patch fixes that.
The fix above, however, exposes another issue: if a module contains a
DISubprogram referenced only indirectly from other debug info
metadata, but not attached to any Function defined within the module
(case 2), cloning such a module causes a DICompileUnit duplication: it
will be moved in indirecty via a DISubprogram by DebugInfoFinder first
(because of the first bug fix described above), without being
self-mapped within the shared ValueMap, and then will be copied during
named metadata cloning. So this patch makes sure DebugInfoFinder
visits DICompileUnit's referenced from DISubprogram's as it goes w/o
re-processing llvm.dbg.cu list over and over again for every function
cloned, and makes sure that CloneFunctionInto self-maps
DICompileUnit's referenced from the entire function, not just its own
DISubprogram attached that may also be missing.
The most convenient way of tesing CloneModule I found is to rely on
CloneModule call from `opt -run-twice`, instead of writing tedious
unit tests. That feature has a couple of properties that makes it hard
to use for this purpose though:
1. CloneModule doesn't copy source filename, making `opt -run-twice`
report it as a difference.
2. `opt -run-twice` does the second run on the original module, not
its clone, making the result of cloning completely invisible in opt's
actual output with and without `-run-twice` both, which directly
contradicts `opt -run-twice`s own error message.
This patch fixes this as well.
Reviewed By: aprantl
Reviewers: loladiro, GorNishanov, espindola, echristo, dexonsmith
Subscribers: vsk, debug-info, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D45593
llvm-svn: 330069
This lifts a restriction on DILocation::getMergedLocation(), allowing it
to create merged locations for instructions other than calls.
Instruction::applyMergedLocation() now defaults to creating merged
locations for all instructions.
The default behavior of getMergedLocation() is unchanged: callers which
invoke it directly are unaffected.
This change will enable a follow-up Mem2Reg fix which improves crash
reporting.
Differential Revision: https://reviews.llvm.org/D45396
llvm-svn: 329955
Most importantly, we should not replace slashes with backslashes
because that would invalidate the path.
Differential Revision: https://reviews.llvm.org/D45473
llvm-svn: 329838
This is causing compilation timeouts on code with long sequences of
local values and calls (i.e. foo(1); foo(2); foo(3); ...). It turns out
that code coverage instrumentation is a great way to create sequences
like this, which how our users ran into the issue in practice.
Intel has a tool that detects these kinds of non-linear compile time
issues, and Andy Kaylor reported it as PR37010.
The current sinking code scans the whole basic block once per local
value sink, which happens before emitting each call. In theory, local
values should only be introduced to be used by instructions between the
current flush point and the last flush point, so we should only need to
scan those instructions.
llvm-svn: 329822
Summary:
This type is created on-demand and used as the base type for array
ranges. Since it is "special", its construction did not go through the
createTypeDIE function and so it was never inserted into the accelerator
table, although it clearly belongs there.
I add an explicit addAccelType call to insert it into the table.
During review, we also decided to rename the type to something more
unique to avoid confusion in case the user has own "sizetype" type. The
new name for the type size __ARRAY_SIZE_TYPE__.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45445
llvm-svn: 329705
Summary:
If an input DICompileUnit is completely empty (e.g., the result of
running "clang -g" on an empty file), we don't bother emitting an empty
DWARF CU. When we do that, we must make sure we don't also emit a DWARF v5
name index, as DWARF specifies that each index must reference at least
one compilation unit.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45435
llvm-svn: 329575
- when tuning for SCE debugger (default for ps4 targets), we will not emit
the DW_AT_linkage_name, which this test needs. I explicitly set the
debugger tuning parameter to get the attribute always.
- darwin targets did not like the "section .text.startup" fragment of
the test. This is not actually needed for the test, so I remove it.
llvm-svn: 329555
Summary:
We were emitting accelerator entries for functions with no name, which
is contrary to the DWARF v5 spec: "All other (i.e., *not*
DW_TAG_namespace) debugging information entries without a DW_AT_name
attribute are excluded." Besides that, a name table entry with an empty
string as a key is fairly useless.
We can sometimes end up with functions which have a DW_AT_linkage_name but no
DW_AT_name. One such example is the global-constructor-initialization functions,
which C++ compilers synthesize for each compilation unit with global
constructors.
A very strict reading of the DWARF v5 spec would suggest that we should not even
emit the accelerator entry for the linkage name in this case, but I don't think
we should go that far.
I found this when running the dwarf verifier over llvm codebase compiled
with DWARF v5 accelerator tables.
Reviewers: JDevlieghere, aprantl, dblaikie
Subscribers: vleschuk, clayborg, echristo, probinson, llvm-commits
Differential Revision: https://reviews.llvm.org/D45367
llvm-svn: 329552
- MSVC was not OK with a static_assert referencing a non-static member
variable, even though it was just in a sizeof(expression). I move the
assert into the emit function, where it is probably more useful.
- Tests were failing in builds which did not have the X86 target
configured. Since this functionality is not target-specific, I have
removed the target specifiers from the .ll files.
llvm-svn: 329201
Summary:
This patch adds a DwarfAccelTableEmitter class, which generates an
accelerator table, as specified in DWARF v5 standard. At the moment it
only generates a DIE offset column and (if we are indexing more than one
compile unit) a CU column.
Indexing type units is not currently supported, as we don't even have
the ability to generate DWARF v5-compatible compile units.
The implementation is not data-source agnostic like the one generating
apple tables. This was not necessary as we currently only have one user
of this code, and without a second user it was not obvious to me how to
best abstract this. (The difference between these tables and the apple
ones is that they need a lot more metadata about the debug info they are
indexing).
The generation is triggered by the --accel-tables argument, which
supersedes the --dwarf-accel-tables arg -- the latter was a simple
on-off switch, but not we can choose between two kinds of accelerator
tables we can generate.
This is tested by parsing the generated tables with llvm-dwarfdump and
the DWARFVerifier, and I've also checked that GNU readelf is able to
make sense of the tables.
Differential Revision: https://reviews.llvm.org/D43286
llvm-svn: 329179
Summary:
Some targets do not support extended format of .loc directive and
support only simple format: .loc <FileID> <Line> <Column>. Patch adds
MCAsmInfo flag and option that allows emit .loc directive without
additional flags.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D45184
llvm-svn: 329089
There are two FPMs in an MSF file, the idea being that for
incremental updates you can write to the alternate one and then
atomically swap them on commit. LLVM defaulted to using FPM1
on the first commit, but this differs from Microsoft's behavior
which is to default to using FPM2 on the first commit. To
eliminate some byte-level file differences, this patch changes
LLVM's default to also be FPM2.
Additionally, LLVM was trying to be "smart" about marking FPM
pages allocated. In addition to marking every page belonging
to the alternate FPM as unallocated, LLVM also marked pages at
the end of the main FPM which were not needed as unallocated.
In order to match the behavior of Microsoft-generated PDBs, we
now always mark every FPM block as allocated, regardless of
whether it is in the main FPM or the alt FPM, and regardless of
whether or not it describes blocks which are actually in the file.
This has the side benefit of simplifying our code.
llvm-svn: 328812
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
We emit the new syntax only for DWARF v5 and later.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328805
Before this patch we were parsing the attributes as section offsets, as
that is what apple_names is doing. However, this is not correct as DWARF
v5 specifies that this attribute should use the Reference form class.
This also updates all the testcases (except the ones that deliberately
pass a different form) to use the correct form class.
llvm-svn: 328773
This reverts commit r328676.
Commit r328676 broke the -no-integrated-as flag necessary to build Linux kernel with Clang:
$ cat t.c
void foo() {}
$ clang -no-integrated-as -c t.c -g
/tmp/t-dcdec5.s: Assembler messages:
/tmp/t-dcdec5.s:8: Error: file number less than one
clang-7.0: error: assembler command failed with exit code 1 (use -v to see invocation)
llvm-svn: 328699
DWARF v5 specifies that the root file (also given in the DW_AT_name
attribute of the compilation unit DIE) should be emitted explicitly to
the line table's list of files. This makes the line table more
independent of the .debug_info section.
Fixes the bug found by asan. Also XFAIL the new test for Darwin, which
is stuck on DWARF v2, and fix up other tests so they stop failing on
Windows. Last but not least, don't break "clang -g" of an assembler
file that has .file directives in it.
Differential Revision: https://reviews.llvm.org/D44054
llvm-svn: 328676
On Hexagon "x = y" is a syntax used in most instructions, and is not
treated as a directive.
Differential Revision: https://reviews.llvm.org/D44256
llvm-svn: 328635
Summary:
Some targets does not support labels inside debug sections, but support
references in form `section+offset`. Patch adds initial support
for this.
Reviewers: echristo, probinson, jlebar
Subscribers: llvm-commits, JDevlieghere
Differential Revision: https://reviews.llvm.org/D43943
llvm-svn: 328314
Summary:
This pass sinks COPY instructions into a successor block, if the COPY is not
used in the current block and the COPY is live-in to a single successor
(i.e., doesn't require the COPY to be duplicated). This avoids executing the
the copy on paths where their results aren't needed. This also exposes
additional opportunites for dead copy elimination and shrink wrapping.
These copies were either not handled by or are inserted after the MachineSink
pass. As an example of the former case, the MachineSink pass cannot sink
COPY instructions with allocatable source registers; for AArch64 these type
of copy instructions are frequently used to move function parameters (PhyReg)
into virtual registers in the entry block..
For the machine IR below, this pass will sink %w19 in the entry into its
successor (%bb.1) because %w19 is only live-in in %bb.1.
```
%bb.0:
%wzr = SUBSWri %w1, 1
%w19 = COPY %w0
Bcc 11, %bb.2
%bb.1:
Live Ins: %w19
BL @fun
%w0 = ADDWrr %w0, %w19
RET %w0
%bb.2:
%w0 = COPY %wzr
RET %w0
```
As we sink %w19 (CSR in AArch64) into %bb.1, the shrink-wrapping pass will be
able to see %bb.0 as a candidate.
With this change I observed 12% more shrink-wrapping candidate and 13% more dead copies deleted in spec2000/2006/2017 on AArch64.
Reviewers: qcolombet, MatzeB, thegameg, mcrosier, gberry, hfinkel, john.brawn, twoh, RKSimon, sebpop, kparzysz
Reviewed By: sebpop
Subscribers: evandro, sebpop, sfertile, aemerson, mgorny, javed.absar, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41463
llvm-svn: 328237
This is mostly just plumbing to get a DWARFDataExtractor where we
compute abbr_offset so we can use getRelocatedValue.
This is part of PR36793.
llvm-svn: 328154
Summary:
When building the selection DAG we sometimes need to postpone
the handling of a dbg.value until the value it should refer to
is created. This is done by using the DanglingDebugInfoMap.
In the past this map has been limited to hold one dangling
dbg.value per value. This patch removes that restriction.
Reviewers: aprantl, rnk, probinson, vsk
Reviewed By: aprantl
Subscribers: Ka-Ka, llvm-commits, JDevlieghere
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44610
llvm-svn: 328084
Summary:
Added a flag -no-dwarf-pub-sections, which allows to disable
emission of DWARF public sections.
Reviewers: probinson, echristo
Subscribers: aprantl, JDevlieghere, llvm-commits
Differential Revision: https://reviews.llvm.org/D44385
llvm-svn: 327994
Summary:
DbgValue nodes were not transferred when integer DAG nodes were promoted. For example, if an i32 add node was promoted to an i64 add node by DAGTypeLegalizer::PromoteIntegerResult(), its DbgValue node was not transferred to the new node. The simple fix is to update SetPromotedInteger() to transfer DbgValues.
Add AArch64/dbg-value-i8.ll to test this change and fix ARM/debug-info-d16-reg.ll which had the wrong DILocalVariable nodes with arg numbers even though they are not for function parameters.
Patch by Se Jong Oh!
Reviewers: vsk, JDevlieghere, aprantl
Reviewed By: JDevlieghere
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D44546
llvm-svn: 327919
Now that almost all functionality of Apple's dsymutil has been
upstreamed, the open source variant can be used as a drop in
replacement. Hence we feel it's no longer necessary to have the llvm
prefix.
Differential revision: https://reviews.llvm.org/D44527
llvm-svn: 327790
Eric Christopher