Objective-C method names when looking for functions
in the top level or a namespace. Method names should
only be found via FindExternalLexicalDecls.
<rdar://problem/11711679>
llvm-svn: 160907
Fixed an issue that could cause circular type parsing that will assert and kill LLDB.
Prior to this fix the DWARF parser would always create class types and not start their definitions (for both C++ and ObjC classes) until we were asked to complete the class later. When we had cases like:
class A
{
class B
{
};
};
We would alway try to complete A before specifying "A" as the decl context for B. Turns out we can just start the definition and still not complete the class since we can check the TagDecl::isCompleteDefinition() function. This only works for C++ types. This means we will not be pulling in the full definition of parent classes all the time and should help with our memory consumption and also reduce the amount of debug info we have to parse.
I also reduced redundant code that was checking in a lldb::clang_type_t was a possible C++ dynamic type since it was still completing the type, just to see if it was dynamic. This was fixed in another function that was checking for a type being dynamic as an ObjC or a C++ type, but there was dedicated fucntion for C++ that we missed.
llvm-svn: 153713
Now when LLDB reports a variable, it has a
complete type. Similarly, when it reports
members of a struct, it completes their types.
Also, when it creates the result variable for
an expression, it ensures that variable's type
is complete.
This ensures compliance with Clang's
expectations, preventing potential crashes.
llvm-svn: 152771
This takes two important changes:
- Calling blocks is now supported. You need to
cast their return values, but that works fine.
- We now can correctly run JIT-compiled
expressions that use floating-point numbers.
Also, we have taken a fix that allows us to
ignore access control in Objective-C as in C++.
llvm-svn: 152286
This fix really needed to happen as a previous fix I had submitted for
calculating symbol sizes made many symbols appear to have zero size since
the function that was calculating the symbol size was calling another function
that would cause the calculation to happen again. This resulted in some symbols
having zero size when they shouldn't. This could then cause infinite stack
traces and many other side affects.
llvm-svn: 152244
JIT when printing the values of registers (e.g.,
"expr $pc"). Now the expression parser can do this
in the IR interpreter without running code in the
inferior process.
llvm-svn: 150554
indicate whether inline functions are desired.
This allows the expression parser, for instance,
to filter out inlined functions when looking for
functions it can call.
llvm-svn: 150279
parser. Specifically:
- ClangUserExpression now keeps weak pointers to the
structures it needs and then locks them when needed.
This ensures that they continue to be valid without
leaking memory if the ClangUserExpression is long
lived.
- ClangExpressionDeclMap, instead of keeping a pointer
to an ExecutionContext, now contains an
ExecutionContext. This prevents bugs if the pointer
or its contents somehow become stale. It also no
longer requires that ExecutionContexts be passed
into any function except its initialization function,
since it can count on the ExecutionContext still
being around.
There's a lot of room for improvement (specifically,
ClangExpressionDeclMap should also use weak pointers
insetad of shared pointers) but this is an important
first step that codifies assumptions that already
existed in the code.
llvm-svn: 150217
information about the current frame rather than
the debug information about "this" and "self"
when determining the types of those pointers.
This allows expressions to work in frames that
don't have valid "this" and "self" pointers,
working around poor debug information.
llvm-svn: 150051
LLVM/Clang. This brings in several fixes, including:
- Improvements in the Just-In-Time compiler's
allocation of memory: the JIT now allocates
memory in chunks of sections, improving its
ability to generate relocations. I have
revamped the RecordingMemoryManager to reflect
these changes, as well as to get the memory
allocation and data copying out fo the
ClangExpressionParser code. Jim Grosbach wrote
the updates to the JIT on the LLVM side.
- A new ExternalASTSource interface to allow LLDB to
report accurate structure layout information to
Clang. Previously we could only report the sizes
of fields, not their offsets. This meant that if
data structures included field alignment
directives, we could not communicate the necessary
alignment to Clang and accesses to the data would
fail. Now we can (and I have update the relevant
test case). Thanks to Doug Gregor for implementing
the Clang side of this fix.
- The way Objective-C interfaces are completed by
Clang has been made consistent with RecordDecls;
with help from Doug Gregor and Greg Clayton I have
ensured that this still works.
- I have eliminated all local LLVM and Clang patches,
committing the ones that are still relevant to LLVM
and Clang as needed.
I have tested the changes extensively locally, but
please let me know if they cause any trouble for you.
llvm-svn: 149775
valobj.AddressOf() returns None when an address is expected in a SyntheticChildrenProvider
Patch from Enrico Granata:
The problem was that the frozen object created by the expression parser was a copy of the contents of the StgClosure, rather than a pointer to it. Thus, the expression parser was correctly computing the result of the arithmetic&cast operation along with its address, but only saving it in the live object. This meant that the frozen copy acted as an address-less variable, hence the problem.
The fix attached to this email lets the expression parser store the "live address" in the frozen copy of the address when the object is built without a valid address of its own.
Doing so, along with delegating ValueObjectConstResult to calculate its own address when necessary, solves the issue. I have also added a new test case to check for regressions in this area, and checked that existing test cases pass correctly.
llvm-svn: 146768
we handle Objective-C method calls. Currently,
LLDB treats the result of an Objective-C method
as unknown if the type information doesn't have
the method's signature. Now Clang can cast the
result to id if it isn't explicitly cast.
I also added a test case for this, as well as a
fix for a type import problem that this feature
exposed.
llvm-svn: 146756
- Even if a frame isn't present, we always try
to use FindGlobalVariable to find variables.
Instead of using frame->TrackGlobalVariable()
to promote the VariableSP into a ValueObject,
we now simply use ValueObjectVariable.
- When requesting the value of a variable, we
allow returning of the "live version" of the
variable -- that is, the variable in the
target instead of a pointer to its freeze
dried version in LLDB -- even if there is no
process present.
llvm-svn: 146315
from symbols more accessible, I have added a second
map to the ClangASTImporter: the ObjCInterfaceMetaMap.
This map keeps track of all type definitions found for
a particular Objective-C interface, allowing the
ClangASTSource to refer to all possible sources when
looking for method definitions.
There is a bug in lookup that I still need to figure out,
but after that we should be able to report full method
information for Objective-C classes shown in symbols.
Also fixed some errors I ran into when enabling the maps
for the persistent type store. The persistent type store
previously did not use the ClangASTImporter to import
types, instead using ASTImporters that got allocated each
time a type needed copying. To support the requirements
of the persistent type store -- namely, that types must be
copied, completed, and then completely severed from their
origin in the parser's AST context (which will go away) --
I added a new function called DeportType which severs all
these connections.
llvm-svn: 145914
object file can correctly make these symbols which will abstract us from the
file format and ABI and we can then ask for the objective C class symbol for
a class and find out which object file it was defined in.
llvm-svn: 145744
in the face of failures to import types, since blithely
passing on NULL types can sometimes lead to trouble.
Also eliminated a use of getAs and replaced it with
dyn_cast, which is more robust.
llvm-svn: 145628
robust:
- Now a client can specify what kind of symbols
are needed; notably, this allows looking up
Objective-C class symbols specifically.
- In the class of symbols being looked up, if
one is non-NULL and others are NULL, LLDB now
prefers the non-NULL one.
llvm-svn: 145554
to allow variables in the persistent variable store to know
how to complete themselves from debug information. That
fixes a variety of bugs during dematerialization of
expression results and also makes persistent variable and
result variables ($foo, $4, ...) more useful.
I have also added logging improvements that make it much
easier to figure out how types are moving from place to
place, and made some checking a little more aggressive.
The commit includes patches to Clang which are currently being
integrated into Clang proper; once these fixes are in Clang
top-of-tree, these patches will be removed. The patches don't
fix API; rather, they fix some internal bugs in Clang's
ASTImporter that were exposed when LLDB was moving types from
place to place multiple times.
llvm-svn: 144969
of problems with Objective-C object completion. To go
along with the LLVM/Clang-side fixes, we have a variety
of Objective-C improvements.
Fixes include:
- It is now possible to run expressions when stopped in
an Objective-C class method and have "self" act just
like "self" would act in the class method itself (i.e.,
[self classMethod] works without casting the return
type if debug info is present). To accomplish this,
the expression masquerades as a class method added by
a category.
- Objective-C objects can now provide methods and
properties and methods to Clang on demand (i.e., the
ASTImporter sets hasExternalVisibleDecls on Objective-C
interface objects).
- Objective-C built-in types, which had long been a bone
of contention (should we be using "id"? "id*"?), are
now fetched correctly using accessor functions on
ClangASTContext. We inhibit searches for them in the
debug information.
There are also a variety of logging fixes, and I made two
changes to the test suite:
- Enabled a test case for Objective-C properties in the
current translation unit.
- Added a test case for calling Objective-C class methods
when stopped in a class method.
llvm-svn: 144607
This is the actual fix for the above radar where global variables that weren't
initialized were not being shown correctly when leaving the DWARF in the .o
files. Global variables that aren't intialized have symbols in the .o files
that specify they are undefined and external to the .o file, yet document the
size of the variable. This allows the compiler to emit a single copy, but makes
it harder for our DWARF in .o files with the executable having a debug map
because the symbol for the global in the .o file doesn't exist in a section
that we can assign a fixed up linked address to, and also the DWARF contains
an invalid address in the "DW_OP_addr" location (always zero). This means that
the DWARF is incorrect and actually maps all such global varaibles to the
first file address in the .o file which is usually the first function. So we
can fix this in either of two ways: make a new fake section in the .o file
so that we have a file address in the .o file that we can relink, or fix the
the variable as it is created in the .o file DWARF parser and actually give it
the file address from the executable. Each variable contains a
SymbolContextScope, or a single pointer that helps us to recreate where the
variables came from (which module, file, function, etc). This context helps
us to resolve any file addresses that might be in the location description of
the variable by pointing us to which file the file address comes from, so we
can just replace the SymbolContextScope and also fix up the location, which we
would have had to do for the other case as well, and update the file address.
Now globals display correctly.
The above changes made it possible to determine if a variable is a global
or static variable when parsing DWARF. The DWARF emits a DW_TAG_variable tag
for each variable (local, global, or static), yet DWARF provides no way for
us to classify these variables into these categories. We can now detect when
a variable has a simple address expressions as its location and this will help
us classify these correctly.
While making the above changes I also noticed that we had two symbol types:
eSymbolTypeExtern and eSymbolTypeUndefined which mean essentially the same
thing: the symbol is not defined in the current object file. Symbol objects
also have a bit that specifies if a symbol is externally visible, so I got
rid of the eSymbolTypeExtern symbol type and moved all code locations that
used it to use the eSymbolTypeUndefined type.
llvm-svn: 144489
IRInterpreter to get the value, not the location,
of references. The location of a reference has
type T&&, which is meaningless to Clang.
llvm-svn: 143592
allows us to set __attribute__ ((used)) on expressions
that masquerade as methods. When we are stopped in
classes in anonymous namespaces, this fix (and enabling
__attribute__ ((used)) on the method) will allow
expressions to run.
llvm-svn: 143560
generated special member functions (constructors,
destructors, etc.) for classes that don't really have
them. We needed to mark these as artificial to reflect
the debug information; this bug does that for
constructors and destructors.
The "etc." case (certain assignment operators, mostly)
remains to be fixed.
llvm-svn: 143526
method as __attribute__ ((used)) when adding it to a
class. This functionality is useful when stopped in
anonymous namespaces: expressions attached to classes
in anonymous namespaces are typically elided by Clang's
CodeGen because they have no namespaces are intended
not to be externally visible. __attribute__ ((used))
forces CodeGen to emit the function.
Right now, __attribute__ ((used)) causes the JIT not to
emit the function, so we're not enabling it until we
fix that.
llvm-svn: 143469
ClangExpressionDeclMap to ClangASTSource, and
moved all general type and namespace lookups
into ClangASTSource. Now ClangASTSource is ready
to complete types given nothing more than a target
and an AST context.
llvm-svn: 143292
AST importer on completing namespace mappings from
ClangExpressionDeclMap to ClangASTSource.
ClangASTSource now contains a TargetSP which it
uses to lookup namespaces in all of a target's
modules. I will use the TargetSP in the future to
look up globals.
llvm-svn: 143275
allow it to complete types on behalf of any AST context
(including the "scratch" AST context associated with
the target), I scrapped its role as intermediary between
the Clang parser and ClangExpressionDeclMap, and instead
made ClangExpressionDeclMap inherit from ClangASTSource.
After this, I will migrate the functions that complete
types and perform namespace lookups from
ClangExpressionDeclMap to ClangASTSource. Ultimately
ClangExpressionDeclMap's only responsiblity will be to
look up variables and ensure that they are materialized
and dematerialized correctly.
llvm-svn: 143253
of reference types. Previously, such variables were
materialized as references to those references, which
caused undesried behavior in Clang and was useless anyway
(the benefit of using references to variables is that it
allows expressions to modify variables in place, but for
references that's not required).
Now we just materialize the references directly, which
fixes a variety of expressions that use references.
llvm-svn: 143137
"_cmd", "this", and "self". These variables are handled
differently from all other external variables used by
the expression. Other variables are used indirectly
through the $__lldb_arg operand; only _cmd, this, and
self are passed directly through the ABI.
There are two modifications:
- I added a function to ClangExpressionDeclMap that
retrives the value of one of these variables by name;
and
- I made IRInterpreter fetch these values when needed,
and ensured that the proper level of indirection is
used.
llvm-svn: 143065
types of the same name. If a local variable with the
given name is found (and we are not searching a
specific namespace) we stop right then and there and
report it.
llvm-svn: 142962
parser. Now expression like the following work as
expected:
-
(lldb) expr struct { int a; int b; } $blah = { 10, 20 }
<no result>
(lldb) expr $blah
(<anonymous struct at Parse:6:5>) $blah = {
(int) a = 10
(int) b = 20
}
-
Now the IRForTarget subsystem knows how to handle
static initializers of various composite types.
Also removed an unnecessary parameter from
ClangExpressionDeclMap::GetFunctionInfo.
llvm-svn: 142936
for debug information that occasionally gets the
const-ness of member functions wrong. We used to
demangle the name, add "const," and remangle it; now
we handle the mangled name directly, which is more
robust.
llvm-svn: 142933
permits a namespace map to be created and populated
when the namespace is imported, not just when it is
requested via FindExternalVisibleDecls().
llvm-svn: 142690
of arbitrary pointers, allowing direct dereferences
of literal addresses. Also disabled special-cased
generation of certain expression results (especially
casts), substituting the IR interpreter.
llvm-svn: 142638
std::string and modified all places that used the std::string it returned
to use the "const char *".
Also modified the expression parser to not crash when a function type fails
to copy into the expression AST context.
llvm-svn: 142561
we never used) with a much simpler class that wraps
the relevant dump functions in Clang. This class also
knows to disable external lookups on DeclContexts
being dumped so it should be safe to print incomplete
Decls.
llvm-svn: 142359
FindExternalVisibleDecls and FindExternalLexicalDecls
are marked and given unique IDs, so that all logging
done as part of their execution can be traced back to
the proper call.
Also there was some logging that really wasn't helpful
in most cases so I disabled it unless verbose logging
(log enable -v lldb expr) is enabled.
llvm-svn: 141987
make it easier to track down which members belong
to which structs (and which call to
FindExternalLexicalDecls is doing the reporting).
llvm-svn: 141930
Specifically, the expression parser used to use
functions attached to SymbolContext to do lookups,
but nowadays it searches a ModuleList or Module
directly instead. These functions had no
remaining clients so I removed them to prevent
bit rot.
I also removed a stray callback function from
ClangExpressionDeclMap.
llvm-svn: 141899
which had previously been commented out while I tested
it. It's not fully working yet, but it doesn't break
our testsuite and it's an important piece of
functionality.
Also added some logging to SymbolFileDWARF to help
diagnose entities that are found in a symbol file,
but do not reside in the expected namespace.
llvm-svn: 141894
context object. Having it populated and registered
within a single FindExternalVisibleDecls call worked
fine when there was only one call (i.e., when we were
just looking in the global namespace).
However, now FindExternalVisibleDecls is called for
nested namespaces as well, which means that it is
called not once but many times (once per module in
which the parent namespace appears). This means that
the namespace mapping is built up across many calls
to the inferior FindExternalVisibleDecls, so I moved
it into a data structure (the search context) that is
shared by all calls.
I also added some logging to make it easier to see
what is happening during a namespace search, and
cleaned up some existing logging.
llvm-svn: 141888
down through Module and SymbolVendor into SymbolFile.
Added checks to SymbolFileDWARF that restrict symbol
searches when a namespace is passed in.
llvm-svn: 141847
we don't need to look them up again when materializing.
Switched over the materialization mechanism (for JIT
expressions) and the lookup mechanism (for interpreted
expressions) to use the VariableSP/Symbol that were
found during parsing.
llvm-svn: 141839
lifetime of ClangExpressionDeclMap. This allows
ClangExpressionVariables found during parsing to be
queried for their containing namespaces during
expression execution.
Other clients (like ClangFunction) explicitly delete
this state, so they should not result in any memory
leaks.
llvm-svn: 141821
calls to the FindExternalVisibleDecls function.
FindExternalVisibleDecls was recording whether
it had found generic function symbols in variables
that were local to the function. Now, however,
multiple calls occur in response to one request
from Clang, since we may be searching across
namespaces. To support that, I moved the local
variables into a bitfield in NameSearchContext.
llvm-svn: 141808
of namespaces (only in the modules where they've
been found) for entities inside those namespaces.
For each NamespaceDecl that has been imported into
the parser, we maintain a map containing
[ModuleSP, ClangNamespaceDecl] pairs in the ASTImporter.
This map has one entry for each module in which the
namespace has been found. When we later scan for an
entity inside a namespace, we search only the modules
in which that namespace was found.
Also made a small whitespace fix in
ClangExpressionParser.cpp.
llvm-svn: 141748
This involved minor changes to the way we report Objective-C
methods, as well as cosmetic changes and added parameters
for a variety of Clang APIs.
llvm-svn: 141437
shared pointers.
Changed the ExecutionContext over to use shared pointers for
the target, process, thread and frame since these objects can
easily go away at any time and any object that was holding onto
an ExecutionContext was running the risk of using a bad object.
Now that the shared pointers for target, process, thread and
frame are just a single pointer (they all use the instrusive
shared pointers) the execution context is much safer and still
the same size.
Made the shared pointers in the the ExecutionContext class protected
and made accessors for all of the various ways to get at the pointers,
references, and shared pointers.
llvm-svn: 140298
it to generate result variables that were not bound
to their underlying data. This allowed the SBValue
class to use the interpreter (if possible).
Also made sure that any result variables that point
to stack allocations in the stack frame of the
interpreted expressions do not get live data.
llvm-svn: 140285
__attribute__ format so the compiler knows that this method takes
printf style formatter arguments and checks that it's being used
correctly. Fix a couple dozen incorrect SetErrorStringWithFormat()
calls throughout the sources.
llvm-svn: 140115
to execute expressions even in the absence of a process.
This allows expressions to run in situations where the
target cannot run -- e.g., to perform calculations based
on type information, or to inspect a binary's static
data.
This modification touches the following files:
lldb-private-enumerations.h
Introduce a new enum specifying the policy for
processing an expression. Some expressions should
always be JITted, for example if they are functions
that will be used over and over again. Some
expressions should always be interpreted, for
example if the target is unsafe to run. For most,
it is acceptable to JIT them, but interpretation
is preferable when possible.
Target.[h,cpp]
Have EvaluateExpression now accept the new enum.
ClangExpressionDeclMap.[cpp,h]
Add support for the IR interpreter and also make
the ClangExpressionDeclMap more robust in the
absence of a process.
ClangFunction.[cpp,h]
Add support for the new enum.
IRInterpreter.[cpp,h]
New implementation.
ClangUserExpression.[cpp,h]
Add support for the new enum, and for running
expressions in the absence of a process.
ClangExpression.h
Remove references to the old DWARF-based method
of evaluating expressions, because it has been
superseded for now.
ClangUtilityFunction.[cpp,h]
Add support for the new enum.
ClangExpressionParser.[cpp,h]
Add support for the new enum, remove references
to DWARF, and add support for checking whether
the expression could be evaluated statically.
IRForTarget.[h,cpp]
Add support for the new enum, and add utility
functions to support the interpreter.
IRToDWARF.cpp
Removed
CommandObjectExpression.cpp
Remove references to the obsolete -i option.
Process.cpp
Modify calls to ClangUserExpression::Evaluate
to pass the correct enum (for dlopen/dlclose)
SBValue.cpp
Add support for the new enum.
SBFrame.cpp
Add support for he new enum.
BreakpointOptions.cpp
Add support for the new enum.
llvm-svn: 139772
expression parser. You can use a persistent
type like this:
(lldb) expr struct $foo { int a; int b; };
(lldb) struct $foo i; i.a = 2; i.b = 3; i
($foo) $0 = {
(int) a = 2
(int) b = 3
}
typedefs work similarly.
This patch affects the following files:
test/expression_command/persistent_types/*
A test case for persistent types,
in particular structs and typedefs.
ClangForward.h
Added TypeDecl, needed to declare some
functions in ASTResultSynthesizer.h
ClangPersistentVariables.[h,cpp]
Added a list of persistent types to the
persistent variable store.
ASTResultSynthesizer.[h,cpp]
Made the AST result synthesizer iterate
across TypeDecls in the expression, and
record any persistent types found. Also
made a minor documentation fix.
ClangUserExpression.[h,cpp]
Extended the user expression class to
keep the state needed to report the
persistent variable store for the target
to the AST result synthesizers.
Also introduced a new error code for
expressions that executed normally but
did not return a result.
CommandObjectExpression.cpp
Improved output for expressions (like
declarations of new persistent types) that
don't return a result. This is no longer
treated as an error.
llvm-svn: 138383
being searched for in too heavyweight a way. Now,
when asking for the address of a function, the
expression parser just asks for a corresponding
data symbol.
llvm-svn: 137731
that detects what context the current expression is
meant to execute in. LLDB now properly consults
the method declaration in the debug information
rather than trying to hunt down the "this" or "self"
pointer by name, which can be misleading.
Other fixes include:
- LLDB now properly detects that it is inside
an inlined C++ member function.
- LLDB now allows access to non-const members when
in const code.
- The functions in SymbolFile that locate the
DeclContext containing a DIE have been renamed
to reflect what they actually do. I have added
new functions that find the DeclContext for the
DIE itself.
I have also introduced testcases for C++ and
Objective-C.
llvm-svn: 136999
completes the support in the LLDB expression parser
for incomplete types. Clang now imports types
lazily, and we complete those types as necessary.
Changes include:
- ClangASTSource now supports three APIs which it
passes to ClangExpressionDeclMap. CompleteType
completes a TagDecl or an ObjCInterfaceDecl when
needed; FindExternalVisibleDecls finds named
entities that are visible in the expression's
scope; and FindExternalLexicalDecls performs a
(potentially restricted) search for entities
inside a lexical scope like a namespace. These
changes mean that entities in namespaces should
work normally.
- The SymbolFileDWARF code for searching a context
for a specific name is now more general, and can
search arbitrary contexts.
- We are continuing to adapt our calls into LLVM
from interfaces that take start and end iterators
when accepting multiple items to interfaces that
use ArrayRef.
- I have cleaned up some code, especially our use
of namespaces.
This change is neutral for our testsuite and greatly
improves correctness for large programs (like Clang)
with complicated type systems. It should also lay
the groundwork for improving the expression parser's
performance as we are lazier and lazier about
providing type information.
llvm-svn: 136555
Used hand merge to apply the diffs. I did not apply the diffs for FormatManager.h and
the diffs for memberwise initialization for ValueObject.cpp because they changed since.
I will ask my colleague to apply them later.
llvm-svn: 135508
Jim Ingham