Summary:
This patch keeps track of MCSymbols created for blocks that were
referenced in inline asm. It prevents creating a new symbol which
doesn't refer to the block.
Inline asm may have a reference to a label. The asm parser however
doesn't recognize it as a label and tries to create a new symbol. The
result being that instead of the original symbol (e.g. ".Ltmp0") the
parser replaces it in the inline asm with the new one (e.g. ".Ltmp00")
without updating it in the symbol table. So the machine basic block
retains the "old" symbol (".Ltmp0"), but the inline asm uses the new one
(".Ltmp00").
Reviewers: nickdesaulniers, craig.topper
Subscribers: nathanchance, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65304
llvm-svn: 368477
Summary:
This is exposed by adding a new testcase in PowerPC in
https://reviews.llvm.org/rL367732
The testcase got different output on different platform, hence breaking
buildbots.
The problem is that we get differnt FuncUnitOrder when calculateResMII.
The root cause is:
1. Two MachineInstr might get SAME priority(MFUsx) from minFuncUnits.
2. Current comparison operator() will return `MFUs1 > MFUs2`.
3. We use iterators for MachineInstr, so the input to FuncUnitSorter
might be different on differnt platform due to the iterator nature.
So for two MI with same MFU, their order is actually depends on the
iterator order, which is platform (implemtation) dependent.
This is risky, and may cause cross-compiling problems.
The fix is to check make sure we assign a determine order when they are
equal.
Reviewers: bcahoon, hfinkel, jmolloy
Subscribers: nemanjai, hiraditya, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65992
llvm-svn: 368441
I've now needed to add an extra parameter to this call twice recently. Not only
is the signature getting extremely unwieldy, but just updating all of the
callsites and implementations is a pain. Putting the parameters in a struct
sidesteps both issues.
llvm-svn: 368408
We may be able to look to how VSELECT is handled to further
improve this, but this appears to be neutral or an improvement
on the test cases we have.
llvm-svn: 368344
Patch https://reviews.llvm.org/D43256 introduced more aggressive loop layout optimization which depends on profile information. If profile information is not available, the statically estimated profile information(generated by BranchProbabilityInfo.cpp) is used. If user program doesn't behave as BranchProbabilityInfo.cpp expected, the layout may be worse.
To be conservative this patch restores the original layout algorithm in plain mode. But user can still try the aggressive layout optimization with -force-precise-rotation-cost=true.
Differential Revision: https://reviews.llvm.org/D65673
llvm-svn: 368339
Summary:
This patch enable assembly output of local commons for AIX using .lcomm
directives. Adds a EmitXCOFFLocalCommonSymbol to MCStreamer so we can emit the
AIX version of .lcomm assembly directives which include a csect name. Handle the
case of BSS locals in PPCAIXAsmPrinter by using EmitXCOFFLocalCommonSymbol. Adds
a test for generating .lcomm on AIX Targets.
Reviewers: cebowleratibm, hubert.reinterpretcast, Xiangling_L, jasonliu, sfertile
Reviewed By: sfertile
Subscribers: wuzish, nemanjai, hiraditya, kbarton, MaskRay, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64825
llvm-svn: 368306
This patch attempts to peek through vectors based on the demanded bits/elt of a particular ISD::EXTRACT_VECTOR_ELT node, allowing us to avoid dependencies on ops that have no impact on the extract.
In particular this helps remove some unnecessary scalar->vector->scalar patterns.
The wasm shift patterns are annoying - @tlively has indicated that the wasm vector shift codegen are to be refactored in the near-term and isn't considered a major issue.
Differential Revision: https://reviews.llvm.org/D65887
llvm-svn: 368276
This reverts commit fbc563e2cb "Create
unique, but identically-named ELF sections for explicitly-sectioned
functions and globals when using -function-sections and
-data-sections."
Reason for revert: sections are created with potentially wrong
attributes.
llvm-svn: 368204
In particular this helps the SSE vector shift cvttps2dq+add+shl pattern by avoiding the need for zeros in shuffle style extensions to vXi32 types as we'll be shifting out those bits anyway
llvm-svn: 368155
https://reviews.llvm.org/D65698
This adds a KnownBits analysis pass for GISel. This was done as a
pass (compared to static functions) so that we can add other features
such as caching queries(within a pass and across passes) in the future.
This patch only adds the basic pass boiler plate, and implements a lazy
non caching knownbits implementation (ported from SelectionDAG). I've
also hooked up the AArch64PreLegalizerCombiner pass to use this - there
should be no compile time regression as the analysis is lazy.
llvm-svn: 368065
This updates all libraries and tools in LLVM Core to use 64-bit offsets
which directly or indirectly come to DataExtractor.
Differential Revision: https://reviews.llvm.org/D65638
llvm-svn: 368014
This patch changes the DAG legalizer to respect the operation actions
set by the target for strict floating-point operations. (Currently, the
legalizer will usually fall back to mutate to the non-strict action
(which is assumed to be legal), and only skip mutation if the strict
operation is marked legal.)
With this patch, if whenever a strict operation is marked as Legal or
Custom, it is passed to the target as usual. Only if it is marked as
Expand will the legalizer attempt to mutate to the non-strict operation.
Note that this will now fail if the non-strict operation is itself
marked as Custom -- the target will have to provide a Custom definition
for the strict operation then as well.
Reviewed By: hfinkel
Differential Revision: https://reviews.llvm.org/D65226
llvm-svn: 368012
Summary:
Before this patch MGATHER/MSCATTER is capable of representing all
common addressing modes, but only when illegal types are used.
This patch adds an IndexType property so more representations
are available when using legal types only.
Original modes:
vector of bases
base + vector of signed scaled offsets
New modes:
base + vector of signed unscaled offsets
base + vector of unsigned scaled offsets
base + vector of unsigned unscaled offsets
The current behaviour of addressing modes for gather/scatter remains
unchanged.
Patch by Paul Walker.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D65636
llvm-svn: 368008
MSVC finds ambiguity where clang doesn't and it looks like it's not going to be an easy fix
Reverting while I figure out how to fix it
This reverts r367916 (git commit aa15ec3c23)
This reverts r367920 (git commit 5d14efe279)
llvm-svn: 367932
FastISel already does this since the initial arm64 port was upstreamed, so
it seems there are no issues with doing this at -O0 for very small memcpys.
Gives a 0.2% geomean code size improvement on CTMark.
Differential Revision: https://reviews.llvm.org/D65758
llvm-svn: 367919
The test case is based on the example from the post-commit thread for:
https://reviews.llvm.org/rGc9171bd0a955
This replaces the x86-specific simple-type check from:
rL367766
with a check in the DAGCombiner. Adding the check isn't
strictly necessary after the fix from:
rL367768
...but it seems likely that we're heading for trouble if
we are creating weird types in this transform.
I combined the earlier legality check into the initial
clause to simplify the code.
So we should only try the trunc/sext transform at the
earliest combine stage, but we limit the transform to
simple types anyway because the TLI hook is probably
too lax about what it considers a free truncate.
llvm-svn: 367834
Adds a two way mapping between the scalable vector IR type and
corresponding SelectionDAG ValueTypes.
Reviewers: craig.topper, jeroen.dobbelaere, fhahn, rengolin, greened, rovka
Reviewed By: greened
Differential Revision: https://reviews.llvm.org/D47770
llvm-svn: 367832
Summary:
This is patch is part of a serie to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet, jfb, jakehehrlich
Reviewed By: jfb
Subscribers: wuzish, jholewinski, arsenm, dschuff, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, dexonsmith, PkmX, jocewei, jsji, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65514
llvm-svn: 367828
Add an explicit construction of the ArrayRef, gcc 5 and earlier don't
seem to select the ArrayRef constructor which takes a C array when the
construction is implicit.
Original commit message:
- Avoid a crash when IPRA calls ARMFrameLowering::determineCalleeSaves
with a null RegScavenger. Simply not updating the register scavenger
is fine because IPRA only cares about the SavedRegs vector, the acutal
code of the function has already been generated at this point.
- Add a new hook to TargetRegisterInfo to get the set of registers which
can be clobbered inside a call, even if the compiler can see both
sides, by linker-generated code.
Differential revision: https://reviews.llvm.org/D64908
llvm-svn: 367819
Summary:
The SimplifyDemandedVectorElts function can replace with undef
when no elements are demanded, but due to how it interacts with
TargetLoweringOpts, it can only do this when the node has
no other users.
Remove a now unneeded DAG combine from the X86 backend.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65713
llvm-svn: 367788
This is further fix for PR42880.
Sanjay already disabled the X86 TLI hook for non-simple types,
but we should really call isTypeLegal here if we're after type
legalization.
llvm-svn: 367768
This is an old commit that exposed a bug in the GISel importer, which caused
non-truncating stores to be selected for truncating store patterns. Now that's
been fixed in r367737 this can go back in.
llvm-svn: 367739
Same as what was done for gather/scatter/load/store in r367489.
Expandload/compressstore were delayed due to lack of constant
masking handling that has since been fixed.
llvm-svn: 367738
Summary:
As part of this, define DenseMapInfo for MCRegister (and Register while I'm at it)
Depends on D65599
Reviewers: arsenm
Subscribers: MatzeB, qcolombet, jvesely, wdng, nhaehnle, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65605
llvm-svn: 367719
This really should have been part of 366765. For some reason, I forgot to handle the corresponding load side, and the readable test cases (using deopt vs statepoints) turned out to be overly reduced. Oops.
As seen in the test change, the problem was that we were using a load with alignment expectations rather than the unaligned variant when the stack alignment was less than that prefered type alignment.
llvm-svn: 367718
This adds support for generating all the loads or stores for a constant mask into a single basic block with no conditionals.
Differential Revision: https://reviews.llvm.org/D65613
llvm-svn: 367715
This reverses a questionable IR canonicalization when a truncate
is free:
sra (add (shl X, N1C), AddC), N1C -->
sext (add (trunc X to (width - N1C)), AddC')
https://rise4fun.com/Alive/slRC
More details in PR42644:
https://bugs.llvm.org/show_bug.cgi?id=42644
I limited this to pre-legalization for code simplicity because that
should be enough to reverse the IR patterns. I don't have any
evidence (no regression test diffs) that we need to try this later.
Differential Revision: https://reviews.llvm.org/D65607
llvm-svn: 367710
This fixes a crash in the case where the type info object is an alias
pointing to a non-zero offset within a global or is otherwise unanalyzable
by the stripPointerCasts() function. Looking through the alias is not the
right thing to do anyway for similar reasons as D65118.
Differential Revision: https://reviews.llvm.org/D65314
llvm-svn: 367696
This optimisation isn't generally profitable for ARM, because we can
save/restore many registers in the prologue and epilogue using the PUSH
and POP instructions, but mostly use individual LDR/STR instructions for
other spills.
Differential revision: https://reviews.llvm.org/D64910
llvm-svn: 367670
- Avoid a crash when IPRA calls ARMFrameLowering::determineCalleeSaves
with a null RegScavenger. Simply not updating the register scavenger
is fine because IPRA only cares about the SavedRegs vector, the acutal
code of the function has already been generated at this point.
- Add a new hook to TargetRegisterInfo to get the set of registers which
can be clobbered inside a call, even if the compiler can see both
sides, by linker-generated code.
Differential revision: https://reviews.llvm.org/D64908
llvm-svn: 367669
Summary:
The old code can be simplified to define the element type of TailCalls as `BasicBlock` not `CallInst`. Also I use the for-range loop instead the for loop.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64905
llvm-svn: 367644
AMDGPU sometimes has legal s16 and <2 x s16> operations, but all
registers are really 32-bit. An unmerge destination really should ben
widened to a 32-bit register. If widening a scalarizing vector with a
target size that matches the vector size, bitcast to integer and
extract the relevant bits with shifts.
I'm not sure if this is the right place for this. This could arguably
be part of widenScalar for the result. I also have a growing feeling
that we're missing a bitcast legalize action.
llvm-svn: 367604
If a type is larger than a legal type and needs to be split, we would previously allow the multiply to be decomposed even if the split multiply is legal. Since the shift + add/sub code would also need to be split, its not any better to decompose it.
This patch figures out what type the mul will eventually be legalized to and then uses that type for the query. I tried just returning false illegal types and letting them get handled after type legalization, but then we can't recognize and i64 constant splat on 32-bit targets since will be destroyed by type legalization. We could special case vectors of i64 to avoid that...
Differential Revision: https://reviews.llvm.org/D65533
llvm-svn: 367601
The note in the documentation suggests this restriction is a compile
time optimization for architectures that make heavy use of
bundling. Allowing virtual registers in a bundle is useful for some
(non-R600) AMDGPU use cases and are infrequent enough to matter.
A more common AMDGPU use case has already been using virtual registers
in bundles since r333691, although never calling finalizeBundle on
them and manually creating the use/def list on the BUNDLE
instruction. This is also relatively infrequent, and only happens for
consecutive sequences of some load/store types.
llvm-svn: 367597
This allows functions and globals to to be reordered later in the linking phase
(using the -symbol-ordering-file) even though reordering will be limited to
the scope of the explicit section.
Patch by Rahman Lavaee!
Differential Revision: https://reviews.llvm.org/D65478
llvm-svn: 367501
X86 at least is able to use movmsk or kmov to move the mask to the scalar
domain. Then we can just use test instructions to test individual bits.
This is more efficient than extracting each mask element
individually.
I special cased v1i1 to use the previous behavior. This avoids
poor type legalization of bitcast of v1i1 to i1.
I've skipped expandload/compressstore as I think we need to
handle constant masks for those better first.
Many tests end up with duplicate test instructions due to tail
duplication in the branch folding pass. But the same thing
happens when constructing similar code in C. So its not unique
to the scalarization.
Not sure if this lowering code will also be good for other targets,
but we're only testing X86 today.
Differential Revision: https://reviews.llvm.org/D65319
llvm-svn: 367489
Summary: Honoring no signed zeroes is also available as a user control through clang separately regardless of fastmath or UnsafeFPMath context, DAG guards should reflect this context.
Reviewers: spatel, arsenm, hfinkel, wristow, craig.topper
Reviewed By: spatel
Subscribers: rampitec, foad, nhaehnle, wuzish, nemanjai, jvesely, wdng, javed.absar, MaskRay, jsji
Differential Revision: https://reviews.llvm.org/D65170
llvm-svn: 367486
Summary:
This will make it possible to improve IPRA by taking into account
register usage in indirect calls.
NFC yet; this is just laying the groundwork to start building
up patches to take advantage of the information for improved register
allocation.
Reviewers: aditya_nandakumar, volkan, qcolombet, arsenm, rovka, aemerson, paquette
Subscribers: sdardis, wdng, javed.absar, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65488
llvm-svn: 367476
This makes the field wider than MachineOperand::SubReg_TargetFlags so that
we don't end up silently truncating any higher bits. We should still catch
any bits truncated from the MachineOperand field as a consequence of the
assertion in MachineOperand::setTargetFlags().
Differential Revision: https://reviews.llvm.org/D65465
llvm-svn: 367474
to bail out in store merging dependence check.
We run into a case where dependence check in store merging bail out many times
for the same store and root nodes in a huge basicblock. That increases compile
time by almost 100x. The patch add a map to track how many times the bailing
out happen for the same store and root, and if it is over a limit, stop
considering the store with the same root as a merging candidate.
Differential Revision: https://reviews.llvm.org/D65174
llvm-svn: 367472
Add an option to control whether or not to enable store merging in dag combiner
so we can workaround some bugs more easily.
Differential Revision: https://reviews.llvm.org/D65482
llvm-svn: 367365
Addresses number of comment made on D64652 after commiting:
- Reorders function decls in the TargetLoweringObjectFileXCOFF class.
- Fix comment in MCSectionXCOFF to include description of external reference
csects.
- Convert several llvm_unreachables to report_fatal_error
- Convert several dyn_casts to casts as they are expected not to fail.
- Avoid copying DataLayout object.
llvm-svn: 367324
This allows us to peek through BITCASTs, attempt to simplify the source operand, and then bitcast back.
This reapplies rL367091 which was reverted at rL367118 - we were inconsistently peeking through the bitcasts to the source value.
Fixes PR42777
llvm-svn: 367174
If anything called the recursive isKnownNeverNaN/computeKnownBits/ComputeNumSignBits/SimplifyDemandedBits/SimplifyMultipleUseDemandedBits with an incorrect depth then we could continue to recurse if we'd already exceeded the depth limit.
This replaces the limit check (Depth == 6) with a (Depth >= 6) to make sure that we don't circumvent it.
This causes a couple of regressions as a mixture of calls (SimplifyMultipleUseDemandedBits + combineX86ShufflesRecursively) were calling with depths that were already over the limit. I've fixed SimplifyMultipleUseDemandedBits to not do this. combineX86ShufflesRecursively is trickier as we get a lot of regressions if we reduce its own limit from 8 to 6 (it also starts at Depth == 1 instead of Depth == 0 like the others....) - I'll see what I can do in future patches.
llvm-svn: 367171
We're getting reports of massive compile time increases because SimplifyMultipleUseDemandedBits was losing track of the depth and not earlying-out. No repro yet, but consider this a pre-emptive commit.
llvm-svn: 367169
Adds machine operand lowering for MCSymbolSDNodes to the PowerPC
backend. This is needed to produce call instructions in assembly for AIX
because the callee operand is a MCSymbolSDNode. The test is XFAIL'ed for
asserts due to a (valid) assertion in PEI that the AIX ABI isn't supported yet.
Differential Revision: https://reviews.llvm.org/D63738
llvm-svn: 367133
Eventually all of these will be moved over, but we create nodes in GetDemandedBits recursion at the moment which causes regressions when we try to remove them all.
llvm-svn: 367092
Summary:
In `block-placement` pass, it will create some patterns for unconditional we can do the simple early retrun.
But the `early-ret` pass is before `block-placement`, we don't want to run it again.
This patch is to do the simple early return to optimize the blocks at the last of `block-placement`.
Below is an example
```
BB: | BB:
XOR 3, 3, 4 | XOR 3, 3, 4
B TBB | B ChainBB
... | ...
ChainBB: | ChainBB:
B TBB | ADD 3, 3, 4
... | BLR
TBB: |
ADD 3, 3, 4 |
BLR |
```
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D63972
llvm-svn: 367080
This allows every serializer format to implement metaSerializer() and
return the corresponding meta serializer.
Original llvm-svn: 366946
Reverted llvm-svn: 367004
This fixes the unit tests on Windows bots.
llvm-svn: 367078
Currently, stack protector loads and stores are resolved during
LocalStackSlotAllocation (if the pass needs to run). When this is the
case, the base register assigned to the frame access is going to be one
of the vregs created during LocalStackSlotAllocation. This means that we
are keeping a pointer to the stack protector slot, and we're using this
pointer to load and store to it.
In case register pressure goes up, we may end up spilling this pointer
to the stack, which can be a security concern.
Instead, leave it to PEI to resolve the frame accesses. In order to do
that, we make all stack protector accesses go through frame index
operands, then PEI will resolve this using an offset from sp/fp/bp.
Differential Revision: https://reviews.llvm.org/D64759
llvm-svn: 367068
Summary:
This was originally reported in D62818.
https://rise4fun.com/Alive/oPH
InstCombine does the opposite fold, in hope that `C l>>/<< Y` expression
will be hoisted out of a loop if `Y` is invariant and `X` is not.
But as it is seen from the diffs here, if it didn't get hoisted,
the produced assembly is almost universally worse.
Much like with my recent "hoist add/sub by/from const" patches,
we should get almost universal win if we hoist constant,
there is almost always an "and/test by imm" instruction,
but "shift of imm" not so much, so we may avoid having to
materialize the immediate, and thus need one less register.
And since we now shift not by constant, but by something else,
the live-range of that something else may reduce.
Special care needs to be applied not to disturb x86 `BT` / hexagon `tstbit`
instruction pattern. And to not get into endless combine loop.
Reviewers: RKSimon, efriedma, t.p.northover, craig.topper, spatel, arsenm
Reviewed By: spatel
Subscribers: hiraditya, MaskRay, wuzish, xbolva00, nikic, nemanjai, jvesely, wdng, nhaehnle, javed.absar, tpr, kristof.beyls, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62871
llvm-svn: 366955
This introduces a new family of combiner helper routines that re-use the
target specific cost model from SelectionDAG, and generate inline implementations
of the memcpy family of intrinsics.
The combines are only enabled at optimization levels higher than -O0, and give
very substantial performance improvements.
Differential Revision: https://reviews.llvm.org/D65167
llvm-svn: 366951
r366317 added a legalization for s128 G_ICMP narrow scalar which tried to hard
code the result type of the new legalized G_SELECT. Change this to instead use
type of the original G_ICMP result and allow the target to legalize it if necessary
later.
llvm-svn: 366943
This patch adds support for recognizing cases where a larger vector type is being used to reduce just the elements in the lower subvector:
e.g. <8 x i32> reduction pattern in a <16 x i32> vector:
<4,5,6,7,u,u,u,u,u,u,u,u,u,u,u,u>
<2,3,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
<1,u,u,u,u,u,u,u,u,u,u,u,u,u,u,u>
matchBinOpReduction returns the lower extracted subvector in such cases, assuming isExtractSubvectorCheap accepts the extraction.
I've only enabled it for X86 reduction sums so far. I intend to enable it for the bitop/minmax cases in future patches, and eventually I think its worth turning it on all the time. This is mainly just a case of ensuring calls to matchBinOpReduction don't make assumptions on the vector width based on the original vector extraction.
Fixes the x86 partial reduction sum cases in PR33758 and PR42023.
Differential Revision: https://reviews.llvm.org/D65047
llvm-svn: 366933
If we are already using the same chain for the old/new memory ops then just return.
Fixes PR42727 which had getLoad() reusing an existing node.
llvm-svn: 366922
If all the demanded elts are from one operand and are inline, then we can use the operand directly.
The changes are mainly from SSE41 targets which has blendvpd but not cmpgtq, allowing the v2i64 comparison to be simplified as we only need the signbit from alternate v4i32 elements.
llvm-svn: 366817
This patch introduces the DAG version of SimplifyMultipleUseDemandedBits, which attempts to peek through ops (mainly and/or/xor so far) that don't contribute to the demandedbits/elts of a node - which means we can do this even in cases where we have multiple uses of an op, which normally requires us to demanded all bits/elts. The intention is to remove a similar instruction - SelectionDAG::GetDemandedBits - once SimplifyMultipleUseDemandedBits has matured.
The InstCombine version of SimplifyMultipleUseDemandedBits can constant fold which I haven't added here yet, and so far I've only wired this up to some basic binops (and/or/xor/add/sub/mul) to demonstrate its use.
We do see a couple of regressions that need to be addressed:
AMDGPU unsigned dot product codegen retains an AND mask (for ZERO_EXTEND) that it previously removed (but otherwise the dotproduct codegen is a lot better).
X86/AVX2 has poor handling of vector ANY_EXTEND/ANY_EXTEND_VECTOR_INREG - it prematurely gets converted to ZERO_EXTEND_VECTOR_INREG.
The code owners have confirmed its ok for these cases to fixed up in future patches.
Differential Revision: https://reviews.llvm.org/D63281
llvm-svn: 366799
The function was calling getNode() on an SDValue to return and the
caller turned the result back into a SDValue. So just return the
original SDValue to avoid this.
llvm-svn: 366779
We were silently using the ABI alignment for all of the stores generated for deopt and gc values. We'd gotten the alignment of the stack slot itself properly reduced (via MachineFrameInfo's clamping), but having the MMO on the store incorrect was enough for us to generate an aligned store to a unaligned location.
The simplest fix would have been to just pass the alignment to the helper function, but once we do that, the helper function doesn't really help. So, inline it and directly call the MMO version of DAG.getStore with a properly constructed MMO.
Note that there's a separate performance possibility here. Even if we *can* realign stacks, we probably don't *want to* if all of the stores are in slowpaths. But that's a later patch, if at all. :)
llvm-svn: 366765
Stubs out a TargetLoweringObjectFileXCOFF class, implementing only
SelectSectionForGlobal for common symbols. Also adds an override of
EmitGlobalVariable in PPCAIXAsmPrinter which adds a number of defensive errors
and adds support for emitting common globals.
llvm-svn: 366727
ARM has code to recognise uses of the "returned" function parameter
attribute which guarantee that the value passed to the function in r0
will be returned in r0 unmodified. IPRA replaces the regmask on call
instructions, so needs to be told about this to avoid reverting the
optimisation.
Differential revision: https://reviews.llvm.org/D64986
llvm-svn: 366669
Summary:
Four things here:
1. Generalize the fold to handle non-splat divisors. Reasonably trivial.
2. Unban power-of-two divisors. I don't see any reason why they should
be illegal.
* There is no ban in Hacker's Delight
* I think the ban came from the same bug that caused the miscompile
in the base patch - in `floor((2^W - 1) / D)` we were dividing by
`D0` instead of `D`, and we **were** ensuring that `D0` is not `1`,
which made sense.
3. Unban `1` divisors. I no longer believe Hacker's Delight actually says
that the fold is invalid for `D = 0`. Further considerations:
* We know that
* `(X u% 1) == 0` can be constant-folded to `1`,
* `(X u% 1) != 0` can be constant-folded to `0`,
* Also, we know that
* `X u<= -1` can be constant-folded to `1`,
* `X u> -1` can be constant-folded to `0`,
* https://godbolt.org/z/7jnZJXhttps://rise4fun.com/Alive/oF6p
* We know will end up with the following:
`(setule/setugt (rotr (mul N, P), K), Q)`
* Therefore, for given new DAG nodes and comparison predicates
(`ule`/`ugt`), we will still produce the correct answer if:
`Q` is a all-ones constant; and both `P` and `K` are *anything*
other than `undef`.
* The fold will indeed produce `Q = all-ones`.
4. Try to re-splat the `P` and `K` vectors - we don't care about
their values for the lanes where divisor was `1`.
Reviewers: RKSimon, hermord, craig.topper, spatel, xbolva00
Reviewed By: RKSimon
Subscribers: hiraditya, javed.absar, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63963
llvm-svn: 366637
The top-level BUNDLE instruction should behave as an ordinary
instruction. It is supposed to have all relevant registers as implicit
operands. Moving it should work as any other instruction. I believe
the assert intended to avoid moving instructions inside bundles.
llvm-svn: 366605
This was handled previously for arguments split due to not fitting in
an MVT. This was dropping the register for argument registers split
due to TLI::getRegisterTypeForCallingConv.
llvm-svn: 366574
Summary:
Current PRE hoists common computations into
CMBB = DT->findNearestCommonDominator(MBB, MBB1).
However, if CMBB is in a hot loop body, we might get performance
degradation.
Differential Revision: https://reviews.llvm.org/D64394
llvm-svn: 366570
If a function definition is not exact, then the linker could select a
differently-compiled version of it, which could use different registers.
https://reviews.llvm.org/D64909
llvm-svn: 366557
Summary:
Inline asm doesn't use labels when compiled as an object file. Therefore, we
shouldn't create one for the (potential) callbr destination. Instead, use the
symbol for the MachineBasicBlock.
Reviewers: nickdesaulniers, craig.topper
Reviewed By: nickdesaulniers
Subscribers: xbolva00, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64888
llvm-svn: 366523
I plan on adding memcpy optimizations in the GlobalISel pipeline, but we can't
do that unless we delay lowering to actual function calls. This patch changes
the translator to generate G_INTRINSIC_W_SIDE_EFFECTS for these functions, and
then have each target specify that using the new custom legalizer for intrinsics
hook that they want it expanded it a libcall.
Differential Revision: https://reviews.llvm.org/D64895
llvm-svn: 366516
This is a small extension of !associated, mostly useful for the implementation
convenience of instrumentation passes that RAUW globals with aliases, such
as LowerTypeTests.
Differential Revision: https://reviews.llvm.org/D64951
llvm-svn: 366502
The LocalStackSlotPass pre-allocates a stack protector and makes sure
that it comes before the local variables on the stack.
We need to make sure that later during PEI we don't re-allocate a new
stack protector slot. If that happens, the new stack protector slot will
end up being **after** the local variables that it should be protecting.
Therefore, we would have two slots assigned for two different stack
protectors, one at the top of the stack, and one at the bottom. Since
PEI will overwrite the assigned slot for the stack protector, the load
that is used to compare the value of the stack protector will use the
slot assigned by PEI, which is wrong.
For this, we need to check if the object is pre-allocated, and re-use
that pre-allocated slot.
Differential Revision: https://reviews.llvm.org/D64757
llvm-svn: 366371
Extract the sources to the GCD of the original size and target size,
padding with implicit_def as necessary.
Also fix the case where the requested source type is wider than the
original result type. This was ignoring the type, and just using the
destination. Do the operation in the requested type and truncate back.
llvm-svn: 366367
Use an anyext to the requested type for the leftover operand to
produce a slightly wider type, and then truncate the final merge.
I have another implementation almost ready which handles arbitrary
widens, but I think it produces worse code in this example (which I
think is 90% due to not folding redundant copies or folding out
implicit_def users), so I wanted to add this as a baseline first.
llvm-svn: 366366
Implement IR intrinsics for stack tagging. Generated code is very
unoptimized for now.
Two special intrinsics, llvm.aarch64.irg.sp and llvm.aarch64.tagp are
used to implement a tagged stack frame pointer in a virtual register.
Differential Revision: https://reviews.llvm.org/D64172
llvm-svn: 366360
The original behavior was to always emit the offsets to each call site in the
call site table as uleb128 values, however on some architectures (eg RISCV)
these uleb128 offsets into the code cannot always be resolved until link time
(because relaxation will invalidate any calculated offsets), and there are no
appropriate relocations for uleb128 values. As a consequence it needs to be
possible to specify an alternative.
This also switches RISCV to use DW_EH_PE_udata4 for call side encodings in
.gcc_except_table
Differential Revision: https://reviews.llvm.org/D63415
Patch by Edward Jones.
llvm-svn: 366329
This patch sets correct encodings for DWARF exception handling for RISC-V
(other than call site encoding, which must be udata4 rather than uleb128 and
is handled by D63415).
This has the same intend as D63409, except this version matches GCC/binutils
behaviour which uses the same encodings regardless of PIC/non-PIC and
medlow/medany code model.
llvm-svn: 366327
Add narrowScalar to half of original size for G_ICMP.
ClampScalar G_ICMP's operands 2 and 3 to to s32.
Select G_ICMP for pointers for MIPS32. Pointer compare is same
as for integers, it is enough to declare them as legal type.
Differential Revision: https://reviews.llvm.org/D64856
llvm-svn: 366317
AMDGPU needs to allocate special argument registers separately from
the user function argument list, so needs direct control over the
CCState.
The ArgLocs argument is only really necessary because CCState doesn't
allow access to it.
llvm-svn: 366279
D64033 <https://reviews.llvm.org/D64033> added DW_AT_call_column for
inline sites. However, that change wasn't aware of "-gno-column-info".
To avoid adding column info when "-gno-column-info" is used, now
DW_AT_call_column is only added when we have non-zero column (when
"-gno-column-info" is used, column will be zero).
Patch by Wenlei He!
Differential Revision: https://reviews.llvm.org/D64784
llvm-svn: 366264
Reimplement scheduling constraints for strict FP instructions in
ScheduleDAGInstrs::buildSchedGraph to allow for more relaxed
scheduling. Specifially, allow one strict FP instruction to
be scheduled across another, as long as it is not moved across
any global barrier.
Differential Revision: https://reviews.llvm.org/D64412
Reviewed By: cameron.mcinally
llvm-svn: 366222
Summary:
As per title. DAGCombiner only mathes the special case where b = 0, this patches extends the pattern to match any value of b.
Depends on D57302
Reviewers: hfinkel, RKSimon, craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59208
llvm-svn: 366214
Summary:
We agreed to rename `except_ref` to `exnref` for consistency with other
reference types in
https://github.com/WebAssembly/exception-handling/issues/79. This also
renames WebAssemblyInstrExceptRef.td to WebAssemblyInstrRef.td in order
to use the file for other reference types in future.
Reviewers: dschuff
Subscribers: sbc100, jgravelle-google, hiraditya, sunfish, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64703
llvm-svn: 366145
The column field is missing for all inline sites, currently it's always
zero. This changes populates DW_AT_call_column field for inline sites.
Test case modified to cover this change.
Patch by: Wenlei He
Differential revision: https://reviews.llvm.org/D64033
llvm-svn: 365945
Summary:
Problem exposed in PowerPC functional testing.
We did not consider Anti dependence for nodes in same cycle,
so we may end up generating bad machine code.
eg: the reduced test won't verify.
*** Bad machine code: Using an undefined physical register ***
- function: lame_encode_buffer_interleaved
- basic block: %bb.4 (0x4bde4e12928)
- instruction: %29:gprc = ADDZE %27:gprc, implicit-def dead $carry, implicit $carry
- operand 3: implicit $carry
Reviewers: bcahoon, kparzysz, hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64192
llvm-svn: 365859
We already split extract_subvector(binop(insert_subvector(v,x),insert_subvector(w,y))) -> binop(x,y).
This patch adds support for extract_subvector(binop(concat_vectors(),concat_vectors())) cases as well.
In particular this means we don't have to wait for X86 lowering to convert concat_vectors to insert_subvector chains, which helps avoid some cases where demandedelts/combine calls occur too late to split large vector ops.
The fast-isel-store.ll load folding regression is annoying but I don't think is that critical.
Differential Revision: https://reviews.llvm.org/D63653
llvm-svn: 365785
If we have:
R = sub X, Y
P = cmp Y, X
...then flipping the operands in the compare instruction can allow using a subtract that sets compare flags.
Motivated by diffs in D58875 - not sure if this changes anything there,
but this seems like a good thing independent of that.
There's a more involved version of this transform already in IR (in instcombine
although that seems misplaced to me) - see "swapMayExposeCSEOpportunities()".
Differential Revision: https://reviews.llvm.org/D63958
llvm-svn: 365711
Since we have distinct types for pointers and scalars, G_INTTOPTRs can sometimes
obstruct attempts to find constant source values. These usually come about when
try to do some kind of null pointer check. Teaching getConstantVRegValWithLookThrough
about this operation allows the CBZ/CBNZ optimization to catch more cases.
This change also improves the case where we can't find a constant source at all.
Previously we would emit a cmp, cset and tbnz for that. Now we try to just emit
a cmp and conditional branch, saving an instruction.
The cumulative code size improvement of this change plus D64354 is 5.5% geomean
on arm64 CTMark -O0.
Differential Revision: https://reviews.llvm.org/D64377
llvm-svn: 365690
Summary: Unsafe does not map well alone for each of these three cases as it is missing NoNan context when accessed directly with clang. I have migrated the fold guards to reflect the expectations of handing nan and zero contexts directly (NoNan, NSZ) and some tests with it. Unsafe does include NSZ, however there is already precedent for using the target option directly to reflect that context.
Reviewers: spatel, wristow, hfinkel, craig.topper, arsenm
Reviewed By: arsenm
Subscribers: michele.scandale, wdng, javed.absar
Differential Revision: https://reviews.llvm.org/D64450
llvm-svn: 365679
In SelectionDAG AMDGPU treated these as legal, but this was mostly
because the bitcasts required for FP types were painful. Theoretically
the bitpattern should eventually match to bfi, so don't bother trying
to get the patterns to import.
llvm-svn: 365583
Basically the problem is that X86 doesn't set the Fast flag from
allowsMemoryAccess on certain CPUs due to slow unaligned memory
subtarget features. This prevents bitcasts from being folded into
loads and stores. But all vector loads and stores of the same width
are the same cost on X86.
This patch merges the allowsMemoryAccess call into isLoadBitCastBeneficial to allow X86 to skip it.
Differential Revision: https://reviews.llvm.org/D64295
llvm-svn: 365549
If we have an icmp->brcond->br sequence where the brcond just branches to the
next block jumping over the br, while the br takes the false edge, then we can
modify the conditional branch to jump to the br's target while inverting the
condition of the incoming icmp. This means we can eliminate the br as an
unconditional branch to the fallthrough block.
Differential Revision: https://reviews.llvm.org/D64354
llvm-svn: 365510
Select gprb or fprb when def/use register operand of G_PHI is
used/defined by either:
copy to/from physical register or
instruction with only one mapping available for that use/def operand.
Integer s64 phi is handled with narrowScalar when mapping is applied,
produced artifacts are combined away. Manually set gprb to all register
operands of instructions created during narrowScalar.
Differential Revision: https://reviews.llvm.org/D64351
llvm-svn: 365494
This makes the functions in Loads.h require a type to be specified
independently of the pointer Value so that when pointers have no structure
other than address-space, it can still do its job.
Most callers had an obvious memory operation handy to provide this type, but a
SROA and ArgumentPromotion were doing more complicated analysis. They get
updated to merge the properties of the various instructions they were
considering.
llvm-svn: 365468
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
DAGTypeLegalizer and SelectionDAGLegalize has helper
functions wrapping the call to TLI.getSetCCResultType(...).
Use those helpers in more places.
llvm-svn: 365456
Summary:
Make sure we use SETGE instead of SETGT when checking
if the sign bit is zero at SMULFIXSAT expansion.
The faulty expansion occured when doing "expand" of
SMULFIXSAT and the scale was exactly matching the
size of the smaller type. For example doing
i64 Z = SMULFIXSAT X, Y, 32
and expanding X/Y/Z into using two i32 values.
The problem was that we sometimes did not saturate
to min when overflowing.
Here is an example using Q3.4 numbers:
Consider that we are multiplying X and Y.
X = 0x80 (-8.0 as Q3.4)
Y = 0x20 (2.0 as Q3.4)
To avoid loss of precision we do a widening
multiplication, getting a 16 bit result
Z = 0xF000 (-16.0 as Q7.8)
To detect negative overflow we should check if
the five most significant bits in Z are less than -1.
Assume that we name the 4 most significant bits
as HH and the next 4 bits as HL. Then we can do the
check by examining if
(HH < -1) or (HH == -1 && "sign bit in HL is zero").
The fault was that we have been doing the check as
(HH < -1) or (HH == -1 && HL > 0)
instead of
(HH < -1) or (HH == -1 && HL >= 0).
In our example HH is -1 and HL is 0, so the old
code did not trigger saturation and simply truncated
the result to 0x00 (0.0). With the bugfix we instead
detect that we should saturate to min, and the result
will be set to 0x80 (-8.0).
Reviewers: leonardchan, bevinh
Reviewed By: leonardchan
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64331
llvm-svn: 365455
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
llvm-svn: 365444
Summary:
This is exposed by functional testing on PowerPC.
In some pipelined loops, Phi refer to phi did not get value defined by
the Phi, hence getting wrong value later.
As the comment mentioned, we should "use the value defined by the Phi,
unless we're generating the firstepilog and the Phi refers to a Phi
in a different stage.", so Phi refering to same stage Phi should use
the value defined by the Phi here.
Reviewers: bcahoon, hfinkel
Reviewed By: hfinkel
Subscribers: MaskRay, wuzish, nemanjai, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64035
llvm-svn: 365428
Summary:
This makes it so that IR files using triples without an environment work
out of the box, without normalizing them.
Typically, the MSVC behavior is more desirable. For example, it tends to
enable things like constant merging, use of associative comdats, etc.
Addresses PR42491
Reviewers: compnerd
Subscribers: hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64109
llvm-svn: 365387
This is extremly slow on AMDGPU, which has a lot of physical register
and a lot of register classes.
determineCalleeSaves, via MachineRegisterInfo::isPhysRegUsed already
added all of the super registers to the saved set.
llvm-svn: 365370
Don't do this locally, computeKnownBits does this better (and can handle non-constant cases as well).
A next step would be to actually simplify non-constant elements - building on what we already do in SimplifyDemandedVectorElts.
llvm-svn: 365309
Some out of tree backend require larger vector type. Since maintaining the changes out of tree is difficult due to the many manual changes needed when adding a new type we are adding it even if no backend currently use it.
Differential Revision: https://reviews.llvm.org/D64141
Patch by Thomas Raoux!
llvm-svn: 365274
Although removeCopyByCommutingDef deals with full copies, it is still
possible to copy undef lanes and thus, we wouldn't have any a value
number for these lanes.
This fixes PR40215.
llvm-svn: 365256
I'm not sure if it's worth it or not to add a hook to disable the pass
for an arbitrary function.
This pass is taking up to 5% of compile time in tiny programs by
iterating through all of the physical registers in every register
class. This pass should be rewritten in terms of regunits. For now,
skip doing anything for entry point functions. The vast majority of
functions in the real world aren't callable, so just not running this
will give the majority of the benefit.
llvm-svn: 365255
When looking for uses/defs to add kill flags, the iterator was double
incremented, skipping the first instruction in the bundle. The use
register in the first bundle instruction was then incorrectly killed.
The "First" instruction should be the BUNDLE itself as the proper
reverse iterator endpoint.
llvm-svn: 365216
Revision r365061 changed a skip of debug instructions for a skip
of meta instructions. This is not safe, as IMPLICIT_DEF is classed
as a meta instruction.
llvm-svn: 365198
Summary:
The uaddo won't be removed and the addcarry will still be
dependent on the uaddo. So we'll just increase the use count
of X and Y and potentially require a COPY.
Reviewers: spatel, RKSimon, deadalnix
Reviewed By: RKSimon
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64190
llvm-svn: 365149
We previously marked all the tests with branch funnels as
`-verify-machineinstrs=0`.
This is an attempt to fix it.
1) `ICALL_BRANCH_FUNNEL` has no defs. Mark it as `let OutOperandList =
(outs)`
2) After that we hit an assert: ``` Assertion failed: (Op.getValueType()
!= MVT::Other && Op.getValueType() != MVT::Glue && "Chain and glue
operands should occur at end of operand list!"), function AddOperand,
file
/Users/francisvm/llvm/llvm/lib/CodeGen/SelectionDAG/InstrEmitter.cpp,
line 461. ```
The chain operand was added at the beginning of the operand list. Move
that to the end.
3) After that we hit another verifier issue in the pseudo expansion
where the registers used in the cmps and jmps are not added to the
livein lists. Add the `EFLAGS` to all the new MBBs that we create.
PR39436
Differential Review: https://reviews.llvm.org/D54155
llvm-svn: 365058
Summary:
This diff improve the capability of DAGCOmbine to generate linear carries propagation in presence of a diamond pattern. It is now able to match a large variety of different patterns rather than some hardcoded one.
Arguably, the codegen in test cases is not better, but this is to be expected. The goal of this transformation is more about canonicalisation than actual optimisation.
Reviewers: hfinkel, RKSimon, craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D57302
llvm-svn: 365051
When a target intrinsic has been determined to touch memory, we construct a MachineMemOperand during SDAG construction. In this case, we should propagate AAMDNodes metadata to the MachineMemOperand where available.
Differential revision: https://reviews.llvm.org/D64131
llvm-svn: 365043
For Thumb2, we prefer low regs (costPerUse = 0) to allow narrow
encoding. However, current allocation order is like:
R0-R3, R12, LR, R4-R11
As a result, a lot of instructs that use R12/LR will be wide instrs.
This patch changes the allocation order to:
R0-R7, R12, LR, R8-R11
for thumb2 and -Osize.
In most cases, there is no extra push/pop instrs as they will be folded
into existing ones. There might be slight performance impact due to more
stack usage, so we only enable it when opt for min size.
https://reviews.llvm.org/D30324
llvm-svn: 365014
Summary:
This is the backend part of [[ https://bugs.llvm.org/show_bug.cgi?id=42457 | PR42457 ]].
In middle-end, we'd want to prefer the form with two adds - D63992,
but as this diff shows, not every target will prefer that pattern.
Out of 4 targets for which i added tests all seem to be ok with inc-of-add for scalars,
but only X86 prefer that same pattern for vectors.
Here i'm adding a new TLI hook, always defaulting to the inc-of-add,
but adding AArch64,ARM,PowerPC overrides to prefer inc-of-add only for scalars.
Reviewers: spatel, RKSimon, efriedma, t.p.northover, hfinkel
Reviewed By: efriedma
Subscribers: nemanjai, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64090
llvm-svn: 365010
The internal option added with r323870 has a typo. It isn't being used
by any tests, but I decided to fix the spelling and leave it in for use
in debugging the changes added in that patch.
llvm-svn: 364958
The code for duplicating instructions could sometimes try to emit copies
intended to deal with unconstrainable register classes to the tail block of the
original instruction, rather than before the newly cloned instruction in the
predecessor block.
This was exposed by GlobalISel on arm64.
Differential Revision: https://reviews.llvm.org/D64049
llvm-svn: 364888
For a given floating point load / store pair, if the load value isn't used by any other operations,
then consider transforming the pair to integer load / store operations if the target deems the transformation profitable.
And we can exploiting much more when there are other operation nodes with chain operand between the load/store pair
so long as we keep the chain ordering original. We only replace the register used to load/store from float to integer.
I only add testcase in ARM because the TLI.isDesirableToTransformToIntegerOp hook is only enabled in ARM target.
Differential Revision: https://reviews.llvm.org/D60601
llvm-svn: 364883
If the requested source type an be used as a merge source type, create
a merge of merges. This avoids creating large, illegal extensions and
bit-ops directly to the result type.
llvm-svn: 364841
https://reviews.llvm.org/D31359
Add a hook "legalizeInstrinsic" to allow backends to override this
and custom lower/legalize intrinsics.
llvm-svn: 364821
Fix stack-use-after-scope errors from r364512. One instance was already
fixed in r364611 - this patch simplifies that fix and addresses one more
instance of similar code.
Discussed in: https://reviews.llvm.org/D63905
llvm-svn: 364778
The SDAGBuilder behavior stems from the days when we didn't have fast
math flags available in SDAG. We do now and doing the transformation in
the legalizer has the advantage that it also works for vector types.
llvm-svn: 364743
This patch addresses PR41675, where a stack-pointer variable is dereferenced
too many times by its location expression, presenting a value on the stack as
the pointer to the stack.
The difference between a stack *pointer* DBG_VALUE and one that refers to a
value on the stack, is currently the indirect flag. However the DWARF backend
will also try to guess whether something is a memory location or not, based
on whether there is any computation in the location expression. By simply
prepending the stack offset to existing expressions, we can accidentally
convert a register location into a memory location, which introduces a
suprise (and unintended) dereference.
The solution is to add DW_OP_stack_value whenever we add a DIExpression
computation to a stack *pointer*. It's an implicit location computed on the
expression stack, thus needs to be flagged as a stack_value.
For the edge case where the offset is zero and the location could be a register
location, DIExpression::prepend will still generate opcodes, and thus
DW_OP_stack_value must still be added.
Differential Revision: https://reviews.llvm.org/D63429
llvm-svn: 364736
Backend changes to enable WLS/LE low-overhead loops for armv8.1-m:
1) Use TTI to communicate to the HardwareLoop pass that we should try
to generate intrinsics that guard the loop entry, as well as setting
the loop trip count.
2) Lower the BRCOND that uses said intrinsic to an Arm specific node:
ARMWLS.
3) ISelDAGToDAG the node to a new pseudo instruction:
t2WhileLoopStart.
4) Add support in ArmLowOverheadLoops to handle the new pseudo
instruction.
Differential Revision: https://reviews.llvm.org/D63816
llvm-svn: 364733
Introduce llvm.test.set.loop.iterations which sets the loop counter
and also produces an i1 after testing that the count is not zero.
Differential Revision: https://reviews.llvm.org/D63809
llvm-svn: 364628
The new switch lowering code that tries to generate jump tables and range checks
were tested at -O0 on arm64, but on -O3 the generic switch lowering code goes to
town on trying to generate optimized lowerings, e.g. multiple jump tables, range
checks etc. This exposed bugs in the way PHI nodes are handled because the CFG
looks even stranger after all of this is done.
llvm-svn: 364613
This patch intends to fix ASAN stack-use-after-scope error.
This is at least a short-term fix to unbreak LLVM's mainline.
Differential Revision: https://reviews.llvm.org/D63905
llvm-svn: 364611
Summary:
I'm submitting a new revision since i don't understand how to reclaim/reopen/take over the existing one, D50222.
There is no such action in "Add Action" menu...
This implements an optimization described in Hacker's Delight 10-17: when `C` is constant,
the result of `X % C == 0` can be computed more cheaply without actually calculating the remainder.
The motivation is discussed here: https://bugs.llvm.org/show_bug.cgi?id=35479.
This is a recommit, the original commit rL364563 was reverted in rL364568
because test-suite detected miscompile - the new comparison constant 'Q'
was being computed incorrectly (we divided by `D0` instead of `D`).
Original patch D50222 by @hermord (Dmytro Shynkevych)
Notes:
- In principle, it's possible to also handle the `X % C1 == C2` case, as discussed on bugzilla.
This seems to require an extra branch on overflow, so I refrained from implementing this for now.
- An explicit check for when the `REM` can be reduced to just its LHS is included:
the `X % C` == 0 optimization breaks `test1` in `test/CodeGen/X86/jump_sign.ll` otherwise.
I hadn't managed to find a better way to not generate worse output in this case.
- The `test/CodeGen/X86/jump_sign.ll` regresses, and is being fixed by a followup patch D63390.
Reviewers: RKSimon, craig.topper, spatel, hermord, xbolva00
Reviewed By: RKSimon, xbolva00
Subscribers: dexonsmith, kristina, xbolva00, javed.absar, llvm-commits, hermord
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63391
llvm-svn: 364600
Summary:
I'm submitting a new revision since i don't understand how to reclaim/reopen/take over the existing one, D50222.
There is no such action in "Add Action" menu...
Original patch D50222 by @hermord (Dmytro Shynkevych)
This implements an optimization described in Hacker's Delight 10-17: when `C` is constant,
the result of `X % C == 0` can be computed more cheaply without actually calculating the remainder.
The motivation is discussed here: https://bugs.llvm.org/show_bug.cgi?id=35479.
Original patch author: @hermord (Dmytro Shynkevych)!
Notes:
- In principle, it's possible to also handle the `X % C1 == C2` case, as discussed on bugzilla.
This seems to require an extra branch on overflow, so I refrained from implementing this for now.
- An explicit check for when the `REM` can be reduced to just its LHS is included:
the `X % C` == 0 optimization breaks `test1` in `test/CodeGen/X86/jump_sign.ll` otherwise.
I hadn't managed to find a better way to not generate worse output in this case.
- The `test/CodeGen/X86/jump_sign.ll` regresses, and is being fixed by a followup patch D63390.
Reviewers: RKSimon, craig.topper, spatel, hermord, xbolva00
Reviewed By: RKSimon, xbolva00
Subscribers: xbolva00, javed.absar, llvm-commits, hermord
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63391
llvm-svn: 364563
Emit replacements for clobbered parameters location if the parameter
has unmodified value throughout the funciton. This is basic scenario
where we can use the debug entry values.
([12/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58042
llvm-svn: 364553
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
Handle call instruction replacements and deletions in order to preserve
valid state of the call site info of the MachineFunction.
NOTE: If the call site info is enabled for a new target, the assertion from
the MachineFunction::DeleteMachineInstr() should help to locate places
where the updateCallSiteInfo() should be called in order to preserve valid
state of the call site info.
([10/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D61062
llvm-svn: 364536
While lowering calls, collect info about registers that forward arguments
into following function frame. We store such info into the MachineFunction
of the call. This is used very late when dumping DWARF info about
call site parameters.
([9/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60715
llvm-svn: 364516
Once MIR code leaves SSA form and the liveness of a vreg is considered,
DBG_VALUE insts are able to refer to non-live vregs, because their
debug-uses do not contribute to liveness. This non-liveness becomes
problematic for optimizations like register coalescing, as they can't
``see'' the debug uses in the liveness analyses.
As a result registers get coalesced regardless of debug uses, and that can
lead to invalid variable locations containing unexpected values. In the
added test case, the first vreg operand of ADD32rr is merged with various
copies of the vreg (great for performance), but a DBG_VALUE of the
unmodified operand is blindly updated to the modified operand. This changes
what value the variable will appear to have in a debugger.
Fix this by changing any DBG_VALUE whose operand will be resurrected by
register coalescing to be a $noreg DBG_VALUE, i.e. give the variable no
location. This is an overapproximation as some coalesced locations are
safe (others are not) -- an extra domination analysis would be required to
work out which, and it would be better if we just don't generate non-live
DBG_VALUEs.
This fixes PR40010.
Differential Revision: https://reviews.llvm.org/D56151
llvm-svn: 364515
Remove the last use of packRegs from IRTranslator and delete
pack/unpackRegs. This introduces a fallback to DAGISel for intrinsics
with aggregate arguments, since we don't have a testcase for them so
it's hard to tell how we'd want to handle them.
Discussed in https://reviews.llvm.org/D63551
llvm-svn: 364514
Change the interface of CallLowering::lowerCall to accept several
virtual registers for each argument, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63551
llvm-svn: 364512
Change the interface of CallLowering::lowerCall to accept several
virtual registers for the call result, instead of just one. This is a
follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660 and
lowerFormalArguments in D63549.
With this change, we no longer pack the virtual registers generated for
aggregates into one big lump before delegating to the target. Therefore,
the target can decide itself whether it wants to handle them as separate
pieces or use one big register.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
NFCI for AMDGPU, Mips and X86.
Differential Revision: https://reviews.llvm.org/D63550
llvm-svn: 364511
Change the interface of CallLowering::lowerFormalArguments to accept
several virtual registers for each formal argument, instead of just one.
This is a follow-up to D46018.
CallLowering::lowerReturn was similarly refactored in D49660. lowerCall
will be refactored in the same way in follow-up patches.
With this change, we forward the virtual registers generated for
aggregates to CallLowering. Therefore, the target can decide itself
whether it wants to handle them as separate pieces or use one big
register. We also copy the pack/unpackRegs helpers to CallLowering to
facilitate this.
ARM and AArch64 have been updated to use the passed in virtual registers
directly, which means we no longer need to generate so many
merge/extract instructions.
AArch64 seems to have had a bug when lowering e.g. [1 x i8*], which was
put into a s64 instead of a p0. Added a test-case which illustrates the
problem more clearly (it crashes without this patch) and fixed the
existing test-case to expect p0.
AMDGPU has been updated to unpack into the virtual registers for
kernels. I think the other code paths fall back for aggregates, so this
should be NFC.
Mips doesn't support aggregates yet, so it's also NFC.
x86 seems to have code for dealing with aggregates, but I couldn't find
the tests for it, so I just added a fallback to DAGISel if we get more
than one virtual register for an argument.
Differential Revision: https://reviews.llvm.org/D63549
llvm-svn: 364510
Allow CallLowering::ArgInfo to contain more than one virtual register.
This is useful when passes split aggregates into several virtual
registers, but need to also provide information about the original type
to the call lowering. Used in follow-up patches.
Differential Revision: https://reviews.llvm.org/D63548
llvm-svn: 364509
Add an attribute into the MachineFunction that tracks call site info.
([8/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D61061
llvm-svn: 364506
A unique DISubprogram may be attached to a function declaration used for
call site debug info.
([6/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60713
llvm-svn: 364500
Summary:
(Not so) boringly identical to pattern a (D62786)
Not yet sure how do deal with the last pattern c.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62793
llvm-svn: 364418
This allows later passes (in particular InstCombine) to optimize more
cases.
One that's important to us is `memcmp(p, q, constant) < 0` and memcmp(p, q, constant) > 0.
llvm-svn: 364412
We support 'big to little' (e.g. extract_subvector(v16i8 bitcast(v2i64))) but not 'little to big' cases (e.g. extract_subvector(v2i64 bitcast(v16i8)))
llvm-svn: 364405
When we calculate MII, we use two loops, one with iterator R++ to
check whether we can reserve the resource, then --R to move back
the iterator to do reservation.
This is risky, as R++, --R may not point to the same element at all.
The can cause wrong MII.
Differential Revision: https://reviews.llvm.org/D63536
llvm-svn: 364353
Peephole opt has a one use limitation which appears to be accidental. The function being used was incorrectly documented as returning whether the def had one *user*, but instead returned true only when there was one *use*. Add a corresponding hasOneNonDbgUser helper, and adjust peephole-opt to use the appropriate one.
All of the actual folding code handles multiple uses within a single instruction. That codepath is well exercised through instruction selection.
Differential Revision: https://reviews.llvm.org/D63656
llvm-svn: 364336
Change the generic ctpop expansion to more efficiently handle a
check for not-a-power-of-two value:
(ctpop x) != 1 --> (x == 0) || ((x & x-1) != 0)
This is the inverted predicate sibling pattern that was added with:
D63004
This should have been done before I changed IR canonicalization to
favor this form with:
rL364246
...so if this requires revert/changing, the earlier commit may also
need to modified.
llvm-svn: 364319
Simplify ZERO_EXTEND_VECTOR_INREG if the extended bits are not required.
Matches what we already do for ZERO_EXTEND.
Reapplies rL363850 but now with legality checks added at rL364290
llvm-svn: 364303
This should not cause any visible change in output, but it's
more efficient because we were producing non-canonical 'sub x, 1'
and 'setcc ugt x, 0'. As mentioned in the TODO, we should also
be handling the inverse predicate.
llvm-svn: 364302
Simplify SIGN_EXTEND_VECTOR_INREG if the extended bits are not required/known zero.
Matches what we already do for SIGN_EXTEND.
Reapplies rL363802 but now with legality checks added at rL364290
llvm-svn: 364299
The *_EXTEND_VECTOR_INREG opcodes were relaxed back around rL346784 to support source vector widths that are smaller than the output - it looks like the legalizers were never updated to account for this.
This patch inserts the smaller source vector into an undef vector of the same width of the result before performing the shuffle+bitcast to correctly handle this.
Part of the yak shaving to solve the crashes from rL364264 and rL364272
llvm-svn: 364295
As part of the fix for rL364264 + rL364272 - limit the *_EXTEND conversion to !TLO.LegalOperations || isOperationLegal cases.
We'll improve X86 legality in future commits.
llvm-svn: 364290
Summary:
This addresses the regression that is being exposed by D50222 in `test/CodeGen/X86/jump_sign.ll`
The missing fold, at least partially, looks trivial:
https://rise4fun.com/Alive/Zsln
i.e. if we are comparing with zero, and comparing the `urem`-by-non-power-of-two,
and the `urem` is of something that may at most have a single bit set (or no bits set at all),
the `urem` is not needed.
Reviewers: RKSimon, craig.topper, xbolva00, spatel
Reviewed By: xbolva00, spatel
Subscribers: xbolva00, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63390
llvm-svn: 364286
This reverts the following patches.
"[TargetLowering] SimplifyDemandedBits SIGN_EXTEND_VECTOR_INREG -> ANY/ZERO_EXTEND_VECTOR_INREG"
"[TargetLowering] SimplifyDemandedBits ZERO_EXTEND_VECTOR_INREG -> ANY_EXTEND_VECTOR_INREG"
"[TargetLowering] SimplifyDemandedBits - add ANY_EXTEND_VECTOR_INREG support"
We can end up with an any_extend_vector_inreg with a 256 bit result type
and a 128 bit result type. This is allowed by the ISD opcode, but the
generic operation legalizer is only able to expand cases where the
total vector width is the same.
The X86 backend creates these mismatched cases for zext_vec_inreg/sext_vec_inreg.
The SimplifyDemandedBits changes are allowing those nodes to become
aext_vec_inreg. For the zext/sext cases, the X86 backend has Custom
handling and never lets them get to the generic legalizer. We need to do the same
for aext_vec_inreg.
llvm-svn: 364264
Widen vector result type for ctlz_zero_undef and cttz_zero_undef the same as
ctlz and cttz.
Differential Revision: https://reviews.llvm.org/D63463
llvm-svn: 364221
Avoids using a plain unsigned for registers throughoug codegen.
Doesn't attempt to change every register use, just something a little
more than the set needed to build after changing the return type of
MachineOperand::getReg().
llvm-svn: 364191
This can occur under certain circumstances when undefs are created later on in the constant multipliers (e.g. in this case due to SimplifyDemandedVectorElts). Its better to let the shift by zero to occur and perform any cleanup afterward.
Fixes OSS Fuzz #15429
llvm-svn: 364179
The code divides the alignment by 2 if the original alignment is
equal to the original VT size. But this wouldn't be correct
if the alignment was larger than the VT size.
The memory operand object already takes care of calling MinAlign
on the base alignment and the memory pointer offset. So we don't
need any special code at all.
llvm-svn: 364151
GlobalISel/IRTranslator.cpp now references SelectionDAG/FunctionLoweringInfo.cpp.
This fixes a link error in -DBUILD_SHARED_LIBS=on builds:
ld.lld: error: undefined symbol: llvm::FunctionLoweringInfo::clear()
>>> referenced by IRTranslator.cpp:2198 (../lib/CodeGen/GlobalISel/IRTranslator.cpp:2198)
>>> lib/CodeGen/GlobalISel/CMakeFiles/LLVMGlobalISel.dir/IRTranslator.cpp.o:(llvm::IRTranslator::finalizeFunction())
llvm-svn: 364124
This change makes use of the newly refactored SwitchLoweringUtils code from
SelectionDAG to in order to generate jump tables and range checks where appropriate.
Much of this code is ported from SDAG with some modifications. We generate
G_JUMP_TABLE and G_BRJT instructions when JT opportunities are found. This means
that targets which previously relied on the naive one MBB per case stmt
translation will now start falling back until they add support for the new opcodes.
For range checks, we don't generate any previously unused operations. This
just recognizes contiguous ranges of case values and generates a single block per
range. Single case value blocks are just a special case of ranges so we get that
support almost for free.
There are still some optimizations missing that I haven't ported over, and
bit-tests are also unimplemented. This patch series is already complex enough.
Actual arm64 support for selection of jump tables is coming in a later patch.
Differential Revision: https://reviews.llvm.org/D63169
llvm-svn: 364085
G_INTTOPTR can prevent the localizer from moving G_CONSTANTs, but since it's
essentially a side effect free cast instruction we can remat both instructions.
This patch changes the localizer to enable localization of the chains by
iterating over the entry block instructions in reverse order. That way, uses will
localized first, and then the defs are free to be localized as well.
This also changes the previous SmallPtrSet of localized instructions to use a
SetVector instead. We're dealing with pointers and need deterministic iteration
order.
Overall, this change improves ARM64 -O0 CTMark code size by around 0.7% geomean.
Differential Revision: https://reviews.llvm.org/D63630
llvm-svn: 364001
We tend to only test for scalar/scalar consts when really we could support non-uniform vectors using ISD::matchUnaryPredicate/matchBinaryPredicate etc.
llvm-svn: 363924
Use getAPIntValue() in a few more places. Most of the time getZExtValue() is fine, but occasionally there's fuzzed code or someone decides to create i65536 or something.....
llvm-svn: 363887
Use matchBinaryPredicate instead of isConstOrConstSplat to let us handle non-uniform shift cases.
This requires us to tweak matchBinaryPredicate to allow it to (optionally) handle constants with different type widths.
llvm-svn: 363792
This allows targets to make more decisions about reserved registers
after isel. For example, now it should be certain there are calls or
stack objects in the frame or not, which could have been introduced by
legalization.
Patch by Matthias Braun
llvm-svn: 363757
Other than adding consistent demanded elts handling which was a trivial addition, the other differences in functionality will be added in later patches.
llvm-svn: 363713
Other than adding consistent demanded elts handling which was a trivial addition, the other differences in functionality will be added in later patches.
llvm-svn: 363710
This adds vector splitting for vaarg instructions during type legalization
Committed on behalf of @luke (Luke Lau)
Differential Revision: https://reviews.llvm.org/D60762
llvm-svn: 363671
Summary:
All the GlobalISel passes are initialized when the target calls
initializeGlobalISel(), so we don't need to call the initializers
from the pass constructors.
Reviewers: qcolombet, t.p.northover, paquette, dsanders, aemerson, aditya_nandakumar
Reviewed By: aemerson
Subscribers: rovka, kristof.beyls, hiraditya, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63235
llvm-svn: 363642
This was ignoring the flag on fneg, and using the source instruction's
flags. Also fixes tests missing from r358702.
Note the expansion itself isn't correct without nnan, but that should
be fixed separately.
llvm-svn: 363637
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
Inter-block localization is the same as what currently happens, except now it
only runs on the entry block because that's where the problematic constants with
long live ranges come from.
The second phase is a new intra-block localization phase which attempts to
re-sink the already localized instructions further right before one of the
multiple uses.
One additional change is to also localize G_GLOBAL_VALUE as they're constants
too. However, on some targets like arm64 it takes multiple instructions to
materialize the value, so some additional heuristics with a TTI hook have been
introduced attempt to prevent code size regressions when localizing these.
Overall, these changes improve CTMark code size on arm64 by 1.2%.
Full code size results:
Program baseline new diff
------------------------------------------------------------------------------
test-suite...-typeset/consumer-typeset.test 1249984 1217216 -2.6%
test-suite...:: CTMark/ClamAV/clamscan.test 1264928 1232152 -2.6%
test-suite :: CTMark/SPASS/SPASS.test 1394092 1361316 -2.4%
test-suite...Mark/mafft/pairlocalalign.test 731320 714928 -2.2%
test-suite :: CTMark/lencod/lencod.test 1340592 1324200 -1.2%
test-suite :: CTMark/kimwitu++/kc.test 3853512 3820420 -0.9%
test-suite :: CTMark/Bullet/bullet.test 3406036 3389652 -0.5%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8017000 8016992 -0.0%
test-suite...TMark/7zip/7zip-benchmark.test 2856588 2856588 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 765704 765704 0.0%
Geomean difference -1.2%
Differential Revision: https://reviews.llvm.org/D63303
llvm-svn: 363632
Summary: This case is related to D63405 in that we need to be propagating FMF on negates.
Reviewers: volkan, spatel, arsenm
Reviewed By: arsenm
Subscribers: wdng, javed.absar
Differential Revision: https://reviews.llvm.org/D63458
llvm-svn: 363631
Summary:
Change the way we deal with iterator invalidation in the extload combines as it
was still possible to neglect to visit a use. Even worse, it happened in the
in-tree test cases and the checks weren't good enough to detect it.
We now take a cheap copy of the use list before iterating over it. This
prevents iterator invalidation from occurring and has the nice side effect
of making the existing schedule-for-erase/schedule-for-insert mechanism
moot.
Reviewers: aditya_nandakumar
Reviewed By: aditya_nandakumar
Subscribers: rovka, kristof.beyls, javed.absar, volkan, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61813
llvm-svn: 363616
A target intrinsic may be defined as possibly reading memory, but the
call site may have additional knowledge that it doesn't read
memory. The intrinsic lowering will expect the pessimistic assumption
of the intrinsic definition, so the chain should still be used.
I fixed the same bug in SelectionDAG in r287593.
llvm-svn: 363580
I keep using the wrong instruction when manually writing tests. This
really needs to check the number of operands, but I don't see an easy
way to do that right now.
llvm-svn: 363579
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
The HardwareLoops pass finds exit blocks with a scevable exit count.
If the target specifies to update the loop counter in a register,
through a phi, we need to ensure that the exit block is a latch so
that we can insert the phi with the correct value for the incoming
edge.
Differential Revision: https://reviews.llvm.org/D63336
llvm-svn: 363556
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This is already done in DAGCombiner::visitINSERT_SUBVECTOR, but this helps a number of shuffles across different vector widths recognise when they come from the same source.
llvm-svn: 363542
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
This is based on the example/discussion in PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
Proper vector shift instructions don't appear until AVX2, so we may generate several
extra instructions within a loop trying to compensate for that. It's difficult to
recover from that shift expansion later than this, so use the existing TLI hook and
splat analysis to enable better codegen.
This extends CGP functionality introduced with:
rL201655
Differential Revision: https://reviews.llvm.org/D63233
llvm-svn: 363511
This reverts rL363474. -debug-only=isel was added to some tests that
don't specify `REQUIRES: asserts`. This causes failures on
-DLLVM_ENABLE_ASSERTIONS=off builds.
I chose to revert instead of fixing the tests because I'm not sure
whether we should add `REQUIRES: asserts` to more tests.
llvm-svn: 363482
Current findBestLoopTop can find and move one kind of block to top, a latch block has one successor. Another common case is:
* a latch block
* it has two successors, one is loop header, another is exit
* it has more than one predecessors
If it is below one of its predecessors P, only P can fall through to it, all other predecessors need a jump to it, and another conditional jump to loop header. If it is moved before loop header, all its predecessors jump to it, then fall through to loop header. So all its predecessors except P can reduce one taken branch.
Differential Revision: https://reviews.llvm.org/D43256
llvm-svn: 363471
This is a branch opcode that takes a jump table pointer, jump table index and an
index into the table to do an indirect branch.
We pass both the table pointer and JTI to allow targets like ARM64 to more
easily use the existing jump table compression optimization without having to
walk up the block to find a paired G_JUMP_TABLE.
Differential Revision: https://reviews.llvm.org/D63159
llvm-svn: 363434
Avoid producing illegal register bank copies for reg_sequence and
phi. The default implementation assumes it is possible to pick any
operand's bank and use that for the result, introducing a copy for
operands with a different bank. This does not check for illegal
copies. It is not legal to introduce a VGPR->SGPR copy, so any VGPR
operand requires the result to be a VGPR.
The changes in getInstrMappingImpl aren't strictly necessary, since
AMDGPU now just bypasses this for reg_sequence/phi. This could be
replaced with an assert in case other targets run into this. It is
currently responsible for producing the error for unsatisfiable
copies, but this will be better served with a verifier check.
For phis, for now assume any undetermined operands must be
VGPRs. Eventually, this needs to be able to defer mapping these
operations. This also does not yet have a way to check for whether the
block is in a divergent region.
llvm-svn: 363410
Avoid a check for valid and a set of redundant asserts. The place
InstructionMapping is constructed asserts all of the default fields
are passed anyway for an invalid mapping, so don't overcomplicate
this.
llvm-svn: 363391
This is consistent with GCC's behavior (which is the defacto standard
for pubnames). Though I find the presence of enumerators from enum
classes to be a bit confusing, possibly a bug on GCC's end (since they
can't be named unqualified, unlike the other names - and names nested in
classes don't go in pubnames, for instance - presumably because one must
name the class first & that's enough to limit the scope of the search)
llvm-svn: 363349
Summary:
Before it was using the fully qualified name only for static data members.
Now it does for all variable names to match MSVC.
Reviewers: rnk
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63012
llvm-svn: 363335
Constants, including G_GLOBAL_VALUE, are all emitted into the entry block which
lets us use the vreg def assuming it dominates all other users. However, it can
cause jumpy debug behaviour since the DebugLoc attached to these MIs are from
a user instruction that could be in a different block.
Fixes PR40887.
Differential Revision: https://reviews.llvm.org/D63286
llvm-svn: 363331
This was exposed by PowerPC target enablement.
In ScheduleDAG, if we haven't seen any uses in this scheduling region,
we will create a dependence edge to ExitSU to model the live-out latency.
This is required for vreg defs with no in-region use, and prefetches with
no vreg def.
When we build NodeOrder in Scheduler, we ignore these boundary nodes.
However, when we check Succs in checkValidNodeOrder, we did not skip
them, so we still assume all the nodes have been sorted and in order in
Indices array. So when we call lower_bound() for ExitSU, it will return
Indices.end(), causing memory issues in following Node access.
Differential Revision: https://reviews.llvm.org/D63282
llvm-svn: 363329
Summary:
I found the following case having tail blocks with no successors merging opportunities after block placement.
Before block placement:
bb0:
...
bne a0, 0, bb2:
bb1:
mv a0, 1
ret
bb2:
...
bb3:
mv a0, 1
ret
bb4:
mv a0, -1
ret
The conditional branch bne in bb0 is opposite to beq.
After block placement:
bb0:
...
beq a0, 0, bb1
bb2:
...
bb4:
mv a0, -1
ret
bb1:
mv a0, 1
ret
bb3:
mv a0, 1
ret
After block placement, that appears new tail merging opportunity, bb1 and bb3 can be merged as one block. So the conditional constraint for merging tail blocks with no successors should be removed. In my experiment for RISC-V, it decreases code size.
Author of original patch: Jim Lin
Reviewers: haicheng, aheejin, craig.topper, rnk, RKSimon, Jim, dmgreen
Reviewed By: Jim, dmgreen
Subscribers: xbolva00, dschuff, javed.absar, sbc100, jgravelle-google, aheejin, kito-cheng, dmgreen, PkmX, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54411
llvm-svn: 363284
Summary:
Relate bug: https://bugs.llvm.org/show_bug.cgi?id=37472
The shrink wrapping pass prematurally restores the stack, at a point where the stack might still be accessed.
Taking an exception can cause the stack to be corrupted.
As a first approach, this patch is overly conservative, assuming that any instruction that may load or store could access
the stack.
Reviewers: dmgreen, qcolombet
Reviewed By: qcolombet
Subscribers: simpal01, efriedma, eli.friedman, javed.absar, llvm-commits, eugenis, chill, carwil, thegameg
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63152
llvm-svn: 363265
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
Since the DebugLocEntry::Value is used as part of DwarfDebug and
DebugLocEntry make it as the separate class.
Reviewers: aprantl, dstenb
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D63213
llvm-svn: 363246
We aim to ignore changes in variable locations during the prologue and
epilogue of functions, to avoid using space documenting location changes
that aren't visible. However in D61940 / r362951 this got ripped out as
the previous implementation was unsound.
Instead, use the FrameDestroy flag to identify when we're in the epilogue
of a function, and ignore variable location changes accordingly. This fits
in with existing code that examines the FrameSetup flag.
Some variable locations get shuffled in modified tests as they now cover
greater ranges, which is what would be expected. Some additional
single-location variables are generated too. Two tests are un-xfailed,
they were only xfailed due to r362951 deleting functionality they depended
on.
Apparently some out-of-tree backends don't accurately maintain FrameDestroy
flags -- if you're an out-of-tree maintainer and see changes in variable
locations disappear due to a faulty FrameDestroy flag, it's safe to back
this change out. The impact is just slightly more debug info than necessary.
Differential Revision: https://reviews.llvm.org/D62314
llvm-svn: 363245
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
llvm-svn: 363169
Summary:
Fix hoisting to basic block which are not legal for hoisting cause
it can be terminated by exception or it is return block.
Reviewers: john.brawn, RKSimon, MatzeB
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63148
llvm-svn: 363164
This opcode generates a pointer to the address of the jump table
specified by the source operand, which is a jump table index.
It will be used in conjunction with an upcoming G_BRJT opcode to support
jump table codegen with GlobalISel.
Differential Revision: https://reviews.llvm.org/D63111
llvm-svn: 363096
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
An earlier fix of a subtle iterator invalidation bug had uncovered a
nondeterminism that was present in the MultiUsers bag. Problem was that
MultiUsers was being looked up using pointers.
This patch is an NFC change that numbers each multiuser and processes each in
numbered order. This fixes the test failure on netbsd and will likely fix the
green-dragon bot too.
llvm-svn: 363012
If the source is undef, then just don't do anything.
This matches SelectionDAG's behaviour in SelectionDAG.cpp.
Also add a test showing that we do the right thing here.
(irtranslator-memfunc-undef.ll)
Differential Revision: https://reviews.llvm.org/D63095
llvm-svn: 362989
This behavior was added in r130928 for both FastISel and SD, and then
disabled in r131156 for FastISel.
This re-enables it for FastISel with the corresponding fix.
This is triggered only when FastISel can't lower the arguments and falls
back to SelectionDAG for it.
FastISel contains a map of "register fixups" where at the end of the
selection phase it replaces all uses of a register with another
register that FastISel sometimes pre-assigned. Code at the end of
SelectionDAGISel::runOnMachineFunction is doing the replacement at the
very end of the function, while other pieces that come in before that
look through the MachineFunction and assume everything is done. In this
case, the real issue is that the code emitting COPY instructions for the
liveins (physreg to vreg) (EmitLiveInCopies) is checking if the vreg
assigned to the physreg is used, and if it's not, it will skip the COPY.
If a register wasn't replaced with its assigned fixup yet, the copy will
be skipped and we'll end up with uses of undefined registers.
This fix moves the replacement of registers before the emission of
copies for the live-ins.
The initial motivation for this fix is to enable tail calls for
swiftself functions, which were blocked because we couldn't prove that
the swiftself argument (which is callee-save) comes from a function
argument (live-in), because there was an extra copy (vreg to vreg).
A few tests are affected by this:
* llvm/test/CodeGen/AArch64/swifterror.ll: we used to spill x21
(callee-save) but never reload it because it's attached to the return.
We now don't even spill it anymore.
* llvm/test/CodeGen/*/swiftself.ll: we tail-call now.
* llvm/test/CodeGen/AMDGPU/mubuf-legalize-operands.ll: I believe this
test was not really testing the right thing, but it worked because the
same registers were re-used.
* llvm/test/CodeGen/ARM/cmpxchg-O0.ll: regalloc changes
* llvm/test/CodeGen/ARM/swifterror.ll: get rid of a copy
* llvm/test/CodeGen/Mips/*: get rid of spills and copies
* llvm/test/CodeGen/SystemZ/swift-return.ll: smaller stack
* llvm/test/CodeGen/X86/atomic-unordered.ll: smaller stack
* llvm/test/CodeGen/X86/swifterror.ll: same as AArch64
* llvm/test/DebugInfo/X86/dbg-declare-arg.ll: stack size changed
Differential Revision: https://reviews.llvm.org/D62361
llvm-svn: 362963
This commit reapplies r359426 (which was reverted in r360301 due to
performance problems) and rolls in D61940 to address the performance problem.
I've combined the two to avoid creating a span of slow-performance, and to
ease reverting if more problems crop up.
The summary of D61940: This patch removes the "ChangingRegs" facility in
DbgEntityHistoryCalculator, as its overapproximate nature can produce incorrect
variable locations. An unchanging register doesn't mean a variable doesn't
change its location.
The patch kills off everything that calculates the ChangingRegs vector.
Previously ChangingRegs spotted epilogues and marked registers as unchanging if
they weren't modified outside the epilogue, increasing the chance that we can
emit a single-location variable record. Without this feature,
debug-loc-offset.mir and pr19307.mir become temporarily XFAIL. They'll be
re-enabled by D62314, using the FrameDestroy flag to identify epilogues, I've
split this into two steps as FrameDestroy isn't necessarily supported by all
backends.
The logic for terminating variable locations at the end of a basic block now
becomes much more enjoyably simple: we just terminate them all.
Other test changes: inlined-argument.ll becomes XFAIL, but for a longer term.
The current algorithm for detecting that a variable has a single-location
doesn't work in this scenario (inlined function in multiple blocks), only other
bugs were making this test work. fission-ranges.ll gets slightly refreshed too,
as the location of "p" is now correctly determined to be a single location.
Differential Revision: https://reviews.llvm.org/D61940
llvm-svn: 362951
Variable's stack location can stretch longer than it should. If a
variable is placed at the stack in a some nested basic block its range
can be calculated to be up to the next occurrence of the variable's
DBG_VALUE, or up to the end of the function, thus covering a basic
blocks that should not be included in the variable’s location range.
This happens because the DbgEntityHistoryCalculator ends register
locations at the end of a basic block only if the variable’s location
register has been changed throughout the function, which is not the
case for the register used to reference stack objects.
This patch also tries to produce a single value location if the location
list builder managed to merge all the locations into one.
Reviewers: aprantl, dstenb, jmorse
Reviewed By: aprantl, dstenb, jmorse
Subscribers: djtodoro, ivanbaev, asowda
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D61600
llvm-svn: 362923
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D62897
llvm-svn: 362921
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
This is fixed recommit of r361356 after PowerPC64 multistage build failure.
llvm-svn: 362901
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
In order for GlobalISel to re-use the significant amount of analysis and
optimization code in SDAG's switch lowering, we first have to extract it and
create an interface to be used by both frameworks.
No test changes as it's NFC.
Differential Revision: https://reviews.llvm.org/D62745
llvm-svn: 362857
When we call checkResourceLimit in bumpCycle or bumpNode, and we
know the resource count has just reached the limit (the equations
are equal). We should return true to mark that we are resource
limited for next schedule, or else we might continue to schedule
in favor of latency for 1 more schedule and create a schedule that
actually overbook the resource.
When we call checkResourceLimit to estimate the resource limite before
scheduling, we don't need to return true even if the equations are
equal, as it shouldn't limit the schedule for it .
Differential Revision: https://reviews.llvm.org/D62345
llvm-svn: 362805
This could fail, which looked concerning. However nothing was actually
using the results of this. I assume this was intended to use the
anti-feature of analyzeBranch of removing instructions, but wasn't
actually calling it with AllowModify = true.
Fixes bug 42162.
llvm-svn: 362800
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
Incorrect Debug Variable Range was calculated while "COMPUTING LIVE DEBUG VARIABLES" stage.
Range for Debug Variable("i") computed according to current state of instructions
inside of basic block. But Register Allocator creates new instructions which were not taken
into account when Live Debug Variables computed. In the result DBG_VALUE instruction for
the "i" variable was put after these newly inserted instructions. This is incorrect.
Debug Value for the loop counter should be inserted before any loop instruction.
Differential Revision: https://reviews.llvm.org/D62650
llvm-svn: 362750
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
This patch is the first step towards ensuring MergeConsecutiveStores correctly handles non-temporal loads\stores:
1 - When merging load\stores we must ensure that they all have the same non-temporal flag. This is unlikely to occur, but can in strange cases where we're storing at the end of one page and the beginning of another.
2 - The merged load\store node must retain the non-temporal flag.
Differential Revision: https://reviews.llvm.org/D62910
llvm-svn: 362723
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
Most parts of LLVM don't care whether the byval type is derived from an
explicit Attribute or from the parameter's pointee type, so it makes
sense for the main access function to just return the right value.
The very few users who do care (only BitcodeReader so far) can find out
how it's specified by accessing the Attribute directly.
llvm-svn: 362642
Instead of passing around fast-math-flags as a parameter, we can set those
using an IRBuilder guard object. This is no-functional-change-intended.
The motivation is to eventually fix the vectorizers to use and set the
correct fast-math-flags for reductions. Examples of that not behaving as
expected are:
https://bugs.llvm.org/show_bug.cgi?id=23116 (should be able to reduce with less than 'fast')
https://bugs.llvm.org/show_bug.cgi?id=35538 (possible miscompile for -0.0)
D61802 (should be able to reduce with IR-level FMF)
Differential Revision: https://reviews.llvm.org/D62272
llvm-svn: 362612
Summary:
An argument that is return by a function but bit-casted before can still
be annotated as "returned". Make sure we do not crash for this case.
Reviewers: sunfish, stephenwlin, niravd, arsenm
Subscribers: wdng, hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59917
llvm-svn: 362546
This is a special case of a more general transform (not (sub Y, X)) -> (add X, ~Y). InstCombine knows the general form. I've restricted to the special case to fix the motivating case PR42118. I tried handling any case where Y was constant, but got some changes on some Mips tests that I couldn't quickly prove where beneficial.
Fixes PR42118
Differential Revision: https://reviews.llvm.org/D62828
llvm-svn: 362533
The proposal in D62498 showed that x86 would benefit from vector
store splitting, but that may conflict with the generic DAG
combiner's store merging transforms.
Add memory type to the existing TLI hook that enables the merging
transforms, so we can limit those changes to scalars only for x86.
llvm-svn: 362507
Summary:
This *might* be the last fold for `sink-addsub-of-const.ll`, but i'm not sure yet.
As far as i can tell, there are no regressions here (ignoring x86-32),
all changes are either good or neutral.
This, almost surprisingly to me, fixes the motivational tests (in `shift-amount-mod.ll`)
`@reg32_lshr_by_sub_from_negated` from [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/vMd3
Reviewers: RKSimon, t.p.northover, craig.topper, spatel, efriedma
Reviewed By: RKSimon
Subscribers: sdardis, javed.absar, arichardson, kristof.beyls, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62774
llvm-svn: 362488
As I mentioned on D61887 we don't get many hits on ComputeNumSignBits as we did on computeKnownBits.
The case we do get is interesting though - it allows us to use the 'ConditionalNegate' combine in combineLogicBlendIntoPBLENDV to remove a select.
It comes too late for SSE41 (BLENDV) cases, but SSE2 tests can hit it now. We should probably try to make use of this for SSE41+ targets as well - avoiding variable blends is usually a good idea. I'll investigate as a followup.
Differential Revision: https://reviews.llvm.org/D62777
llvm-svn: 362486
This opportunity is found from spec 2017 557.xz_r. And it is used by the sha encrypt/decrypt. See sha-2/sha512.c
static void store64(u64 x, unsigned char* y)
{
for(int i = 0; i != 8; ++i)
y[i] = (x >> ((7-i) * 8)) & 255;
}
static u64 load64(const unsigned char* y)
{
u64 res = 0;
for(int i = 0; i != 8; ++i)
res |= (u64)(y[i]) << ((7-i) * 8);
return res;
}
The load64 has been implemented by https://reviews.llvm.org/D26149
This patch is trying to implement the store pattern.
Match a pattern where a wide type scalar value is stored by several narrow
stores. Fold it into a single store or a BSWAP and a store if the targets
supports it.
Assuming little endian target:
i8 *p = ...
i32 val = ...
p[0] = (val >> 0) & 0xFF;
p[1] = (val >> 8) & 0xFF;
p[2] = (val >> 16) & 0xFF;
p[3] = (val >> 24) & 0xFF;
>
*((i32)p) = val;
i8 *p = ...
i32 val = ...
p[0] = (val >> 24) & 0xFF;
p[1] = (val >> 16) & 0xFF;
p[2] = (val >> 8) & 0xFF;
p[3] = (val >> 0) & 0xFF;
>
*((i32)p) = BSWAP(val);
Differential Revision: https://reviews.llvm.org/D61843
llvm-svn: 362472
Summary: This change facilitates propagating fmf which was placed on setcc from fcmp through folds with selects so that back ends can model this path for arithmetic folds on selects in SDAG.
Reviewers: qcolombet, spatel
Reviewed By: qcolombet
Subscribers: nemanjai, jsji
Differential Revision: https://reviews.llvm.org/D62552
llvm-svn: 362439
For some reason multiple places need to do this, and the variant the
loop unroller and inliner use was not handling it.
Also, introduce a new wrapper to be slightly more precise, since on
AMDGPU some addrspacecasts are free, but not no-ops.
llvm-svn: 362436
We were missing this fold in the DAG, which I've copied directly from llvm::ConstantFoldCastInstruction
Differential Revision: https://reviews.llvm.org/D62807
llvm-svn: 362397
When LiveDebugValues deduces new variable's location from spill, restore or
register copy instruction it should close old variable's location. Otherwise
we can have multiple block output locations for same variable. That could lead
to inserting two DBG_VALUEs for same variable to the beginning of the successor
block which results to ignoring of first DBG_VALUE.
Reviewers: aprantl, jmorse, wolfgangp, dstenb
Reviewed By: aprantl
Subscribers: probinson, asowda, ivanbaev, petarj, djtodoro
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D62196
llvm-svn: 362373
If we hit the limit, we do expand the outstanding tokenfactors.
Otherwise, we might drop nodes with users in the unexpanded
tokenfactors. This fixes the crashes reported by Jordan Rupprecht.
Reviewers: niravd, spatel, craig.topper, rupprecht
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D62633
llvm-svn: 362350
Move this combine from x86 into generic DAGCombine, which currently only manages cases where the bitcast is between types of the same scalarsize.
Differential Revision: https://reviews.llvm.org/D59188
llvm-svn: 362324
Add (opt-in) support for implicit truncation to isConstOrConstSplat, which allows us to match truncated 'all ones' cases in isBitwiseNot.
PR41020 compares against using ISD::isBuildVectorAllOnes() instead, but that predicate silently accepts any UNDEF elements in the build vector which might not be what we want in isBitwiseNot - so I've added an opt-in 'AllowUndefs' flag that is set to false by default but will allow us to enable it on individual cases where its safe.
Differential Revision: https://reviews.llvm.org/D62783
llvm-svn: 362323
The results of the dyn_casts were immediately dereferenced on the next line
so they had better not be null.
I don't think there's any way for these dyn_casts to fail, so use a cast
of adding null check.
llvm-svn: 362315
Over a year ago, MachineInstr gained a fourth boolean parameter that occurs
before the TII pointer. When this happened, several places started accidentally
passing TII into this boolean parameter instead of the TII parameter.
llvm-svn: 362312
We were hashing the string pointer, not the string, so two instructions
could be identical (isIdenticalTo), but have different hash codes.
This showed up as a very rare, non-deterministic assertion failure
rehashing a DenseMap constructed by MachineOutliner. So there's no
"real" testcase, just a unittest which checks that the hash function
behaves correctly.
I'm a little scared fixing this is going to cause a regression in
outlining or MachineCSE, but hopefully we won't run into any issues.
Differential Revision: https://reviews.llvm.org/D61975
llvm-svn: 362281
Just copy all of the operands except the chain and call MorphNode on that.
This removes the IsUnary and IsTernary flags.
Also always get the result type from the result type of the original
nodes. Previously we got it from the operand except for two nodes
where that didn't work.
llvm-svn: 362269
Summary:
Fixes a warning produced from scan-build (llvm.org/reports/scan-build/),
further warnings found by annotation isMoveInstr [[nodiscard]].
isMoveInstr potentially does not assign to its parameters, so if they
were uninitialized, they will potentially stay uninitialized. It seems
most call sites pass references to uninitialized values, then use them
without checking the return value.
Reviewers: wmi
Reviewed By: wmi
Subscribers: MatzeB, qcolombet, hiraditya, tpr, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62109
llvm-svn: 362265
We don't want to create vregs if there is nothing to use them for. That causes
verifier errors.
Differential Revision: https://reviews.llvm.org/D62740
llvm-svn: 362247
[FPEnv] Added a special UnrollVectorOp method to deal with the chain on StrictFP opcodes
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: https://reviews.llvm.org/D62546
llvm-svn: 362241
This consolidates the vreg skip code into one function (SkipVRegs()).
SkipVRegs() now knows if it should skip as if it is the first initialization or
subsequent skips.
The first skip is also done the first time createVirtualRegister is called by
the cursor instead of by the cursor's constructor. This prevents verifier
errors on machine functions that have no vregs (where the verifier will
complain that there are vregs when the function uses none).
Differential Revision: https://reviews.llvm.org/D62717
llvm-svn: 362195
This is am almost NFC, it does the following:
- If there is no register class for a COPY's src or dst, bail.
- Fixes uses iterator invalidation bug.
Differential Revision: https://reviews.llvm.org/D62713
llvm-svn: 362191
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
llvm-svn: 362160
I don't have a test case for these, but there is a test case for D62266
where, even after all the constant-folding patches, we still end up
with endless combine loop. Which makes sense, since we don't constant
fold for opaque constants.
llvm-svn: 362156
Summary:
Only vector tests are being affected here,
since subtraction by scalar constant is rewritten
as addition by negated constant.
No surprising test changes.
https://rise4fun.com/Alive/pbT
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62257
llvm-svn: 362146
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 362145
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 362144
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 362143
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs, and then reverted in
rL362109 to fix missing constant folds that were causing
endless combine loops.
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 362142
Summary:
Direct sibling of D62662, the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62664
llvm-svn: 362133
Summary:
No tests change, and i'm not sure how to test this, but it's better safe than sorry.
Reviewers: spatel, RKSimon, craig.topper, t.p.northover
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62663
llvm-svn: 362132
Summary:
This was the root cause of the endless combine loop in D62257
https://rise4fun.com/Alive/d3W
Reviewers: RKSimon, spatel, craig.topper, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62662
llvm-svn: 362131
Summary: No tests change, and i'm not sure how to test this, but it's better safe than sorry.
Reviewers: spatel, RKSimon, craig.topper, t.p.northover
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62661
llvm-svn: 362130
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
There were crashes (addrspace-memoperands.mir was only one of them) in MIR that
had operands that came from before register classes were set. With these
operands, creating a replacement vreg (for MIR-Canon's renaming) needs to use
the vreg type rather than the RegisterClass which is not present.
Differential Revision: https://reviews.llvm.org/D62543
llvm-svn: 362122
This change creates UnrollVectorOp_StrictFP. The purpose of this is to address a failure that consistently occurs when calling StrictFP functions on vectors whose number of elements is 3 + 2n on most platforms, such as PowerPC or SystemZ. The old UnrollVectorOp method does not expect that the vector that it will unroll will have a chain, so it has an assert that prevents it from running if this is the case. This new StrictFP version of the method deals with the chain while unrolling the vector. With this new function in place during vector widending, llc can run vector-constrained-fp-intrinsics.ll for SystemZ successfully.
Submitted by: Drew Wock <drew.wock@sas.com>
Reviewed by: Cameron McInally, Kevin P. Neal
Approved by: Cameron McInally
Differential Revision: http://reviews.llvm.org/D62546
llvm-svn: 362112
I was looking into an endless combine loop the uncommitted follow-up patch
was causing, and it appears even these patches can exibit such an
endless loop. The root cause is that we try to hoist one binop (add/sub) with
constant operand, and if we get two such binops both of which are
eligible for this hoisting, we get stuck.
Some cases may highlight missing constant-folds.
Reverts r361871,r361872,r361873,r361874.
llvm-svn: 362109
Summary:
Add static data members to IR debug info's list of global variables
so that they are emitted as S_CONSTANT records.
Related to https://bugs.llvm.org/show_bug.cgi?id=41615.
Reviewers: rnk
Subscribers: aprantl, cfe-commits, llvm-commits, thakis
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62167
llvm-svn: 362038
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362012
The current design use DFA to do resource tracking in SMS,
and DFA only support InstrItins, and also has scaling limitation.
This patch extend SMS to allow Subtarget to use ProcResource in
InstrSchedModel instead.
Differential Revision: https://reviews.llvm.org/D62163
llvm-svn: 361919
avoid static check fail
RegClassOrBank is an object of RegClassOrRegBank, which is defined as
using llvm::RegClassOrRegBank = typedef PointerUnion<const
TargetRegisterClass *, const RegisterBank *>
so control flow can not get here. Use ""llvm_unreachable" here to avoid
"null pointer" confusion.
Patch by Shengchen Kan (skan)
Differential Revision: https://reviews.llvm.org/D62006
Signed-off-by: pengfei <pengfei.wang@intel.com>
llvm-svn: 361912
To determine the list of clobbered registers, the RegUsageInfoCollector pass
uses the list of callee saved registers provided by the target and then augments
it with the list of registers which have all their subregisters saved. It then
basically does the difference between all the registers and the saved registers
to come up with what is clobbered (plus it checks that the register is defined
within that functions).
The patch fixes a bug where when register does not have any subregister lane,
hence when checking if any of its subregister are not saved, we would find none
and think the register is saved as well.
That's obviously wrong.
The code was actually kind of checking for something like that with the
CoveredBySubRegs bit. What this bit says is that a register is completely
covered by its subregisters.
We required that this bit was set, to check that a register was saved by its
subregister lanes, since without this bit, we potentially would miss to check
some part of the register.
However, this bit is used de facto on registers that don't have any
subregisters (e.g., on ARM) and the code was not prepared for that.
This patch fixes this by checking that a register has subregisters before
declaring it saved when none of its lanes are modified.
llvm-svn: 361901
This patch add the ISD::LRINT and ISD::LLRINT along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lrint/llrint generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D62017
llvm-svn: 361875
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
This is a recommit, originally committed in rL361856, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 361874
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
This is a recommit, originally committed in rL361855, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 361873
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
This is a recommit, originally committed in rL361853, but reverted
to investigate test-suite compile-time hangs.
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 361872
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
This is a recommit, originally committed in rL361852, but reverted
to investigate test-suite compile-time hangs.
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 361871
Summary:
Again only vectors affected. Frustrating. Let me take a look into that..
https://rise4fun.com/Alive/AAq
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62294
llvm-svn: 361856
Summary:
This prevents regressions in next patch,
and somewhat recovers from the regression to AMDGPU test in D62223.
It is indeed not great that we leave vector decrement,
don't transform it into vector add all-ones..
https://rise4fun.com/Alive/ZRl
Reviewers: RKSimon, craig.topper, spatel, arsenm
Reviewed By: RKSimon, arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62263
llvm-svn: 361855
Summary:
Only vector tests are being affected here,
since subtraction by scalar constant is rewritten
as addition by negated constant.
No surprising test changes.
https://rise4fun.com/Alive/pbT
Reviewers: RKSimon, craig.topper, spatel
Reviewed By: RKSimon
Subscribers: javed.absar, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62257
llvm-svn: 361854
Summary:
Direct sibling of D62223 patch.
While i don't have a direct motivational pattern for this,
it would seem to make sense to handle both patterns (or none),
for symmetry?
The aarch64 changes look neutral;
sparc and systemz look like improvement (one less instruction each);
x86 changes - 32bit case improves, 64bit case shows that LEA no longer
gets constructed, which may be because that whole test is `-mattr=+slow-lea,+slow-3ops-lea`
https://rise4fun.com/Alive/ffh
Reviewers: RKSimon, craig.topper, spatel, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, jyknight, javed.absar, kristof.beyls, fedor.sergeev, jrtc27, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62252
llvm-svn: 361853
Summary:
The main motivation is shown by all these `neg` instructions that are now created.
In particular, the `@reg32_lshr_by_negated_unfolded_sub_b` test.
AArch64 test changes all look good (`neg` created), or neutral.
X86 changes look neutral (vectors), or good (`neg` / `xor eax, eax` created).
I'm not sure about `X86/ragreedy-hoist-spill.ll`, it looks like the spill
is now hoisted into preheader (which should still be good?),
2 4-byte reloads become 1 8-byte reload, and are elsewhere,
but i'm not sure how that affects that loop.
I'm unable to interpret AMDGPU change, looks neutral-ish?
This is hopefully a step towards solving [[ https://bugs.llvm.org/show_bug.cgi?id=41952 | PR41952 ]].
https://rise4fun.com/Alive/pkdq (we are missing more patterns, i'll submit them later)
Reviewers: craig.topper, RKSimon, spatel, arsenm
Reviewed By: RKSimon
Subscribers: bjope, qcolombet, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, javed.absar, dstuttard, tpr, t-tye, kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62223
llvm-svn: 361852
Move the element index/count variables into the block where they are actually used - appeases cppcheck and helps avoid shadow variable warnings.
llvm-svn: 361821
Summary:
When DwarfDebug::buildLocationList() encountered an undef debug value,
it would truncate all open values, regardless if they were overlapping or
not. This patch fixes so that it only does that for overlapping fragments.
This change unearthed a bug that I had introduced in D57511,
which I have fixed in this patch. The code in DebugHandlerBase that
changes labels for parameter debug values could break DwarfDebug's
assumption that the labels for the entries in the debug value history
are monotonically increasing. Before this patch, that bug could result
in location list entries whose ending address was lower than the
beginning address, and with the changes for undef debug values that this
patch introduces it could trigger an assertion, due to attempting to
emit location list entries with empty ranges. A reproducer for the bug
is added in param-reg-const-mix.mir.
Reviewers: aprantl, jmorse, probinson
Reviewed By: aprantl
Subscribers: javed.absar, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D62379
llvm-svn: 361820
Setting mayLiveOut based only on use instructions after allocating the
def block did not work if the use block was allocated before the def
block, since the virtual register uses were already removed.
Fixes bug 41973.
llvm-svn: 361781
This is derived from the related fold for build vectors.
We also have a version of this in DAGCombiner. The benefit of
having this fold at node creation time is (1) efficiency and
(2) preventing infinite looping from creating patterns that
should not exist in the first place.
Currently, the inf-loop could happen with MergeConsecutiveStores()
because it naively creates concat of extracts when forming a wider
vector store. That could fight with target-specific store narrowing.
llvm-svn: 361780
There's a possible missing fold here for extracting from the
same source vector. It's similar to a check that we use to
squash a build vector with all extracted elements from the
same source vector.
llvm-svn: 361778
Summary:
- The current implementation simplifies the case where the source of
`copyto` is `implicit-def`ed. However, it only works when that
`implicit-def` is single-used since it detects that from
`implicit-def` and cannot determine which destination vreg should be
used if there are multiple uses.
- This patch changes that detection when `copyto` is being emitted. If
that `copyto`'s source is defined from `implicit-def`, it simplifies
it. Hence, it works even that `implicit-def` is multi-used.
- Except it simplifies the internal IR, it won't improve the quality of
code generation. However, it helps to detect 'implicit-def` in a
straight-forward manner in some passes, such as `si-i1-copies`. A test
case is added.
Reviewers: sunfish, nhaehnle
Subscribers: jvesely, hiraditya, asbirlea, llvm-commits, yaxunl
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62342
llvm-svn: 361777
The DemandedElts variable is pretty much inert at the moment - the original GetDemandedBits implementation calls it with an 'all ones' DemandedElts value so the function is active and behaves exactly as it used to.
llvm-svn: 361773
This is problematic on buildbots, as discussed here: https://reviews.llvm.org/rL361356
It seems like the plan already was to revert, but that hasn't happened yet.
llvm-svn: 361746
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
This commit was reverted because of the build failure.
The reason was mlformed patch.
Build failure fixed.
llvm-svn: 361741
The test based on PR42010:
https://bugs.llvm.org/show_bug.cgi?id=42010
...may show an inaccuracy for PPC's target defs, but we should not
be so aggressive with an assert here. There's no telling what out-of-tree
targets look like.
llvm-svn: 361696
Details: To make instruction selection really divergence driven it is necessary to assign
the correct register classes to the cross block values beforehand. For the divergent targets
same value type requires different register classes dependent on the value divergence.
Reviewers: rampitec, nhaehnle
Differential Revision: https://reviews.llvm.org/D59990
llvm-svn: 361644
This patch adds the overridable TargetLowering::getTargetConstantFromLoad function which allows targets to return any constant value loaded by a LoadSDNode node - only X86 makes use of this so far but everything should be in place for other targets.
computeKnownBits then uses this function to improve codegen, notably vector code after legalization.
A future commit will do the same for ComputeNumSignBits but computeKnownBits sees the bigger benefit.
This required a couple of fixes:
* SimplifyDemandedBits must early-out for getTargetConstantFromLoad cases to prevent infinite loops of constant regeneration (similar to what we already do for BUILD_VECTOR).
* Fix a DAGCombiner::visitTRUNCATE issue as we had trunc(shl(v8i32),v8i16) <-> shl(trunc(v8i16),v8i32) infinite loops after legalization on AVX512 targets.
Differential Revision: https://reviews.llvm.org/D61887
llvm-svn: 361620
Just a minor refactoring to use the new helper method
DataLayout::typeSizeEqualsStoreSize(). This is done when
checking if getTypeSizeInBits is equal/non-equal to
getTypeStoreSizeInBits.
llvm-svn: 361613
swifterror marks an argument as a register pretending to be a pointer, so we
need a guaranteed mem2reg-like analysis of its uses. Fortunately most of the
infrastructure can be reused from the DAG world.
llvm-svn: 361608
This is no-functional-change-intended currently because the definition
of isBinOp() only includes opcodes that produce 1 value. But if we
share that implementation with isCommutativeBinOp() as proposed in
D62191, then we need to make sure that the callers bail out for
opcodes that they are not prepared to handle correctly.
llvm-svn: 361547
When printing assembly for PtrToInt, AsmPrinter::lowerConstant
incorrectly assumed that if PtrToInt was not converting to an
int with exactly the same number of bits, it must be widening
to a larger int. But this isn't necessarily true; PtrToInt can
also shrink the size, which is useful when you want to produce
a known 32-bit pointer on a 64-bit platform (on x86_64 ELF
this yields a R_X86_64_32 relocation).
The old behavior of falling through to the widening case for a
narrowing PtrToInt yields bogus assembly code like this, which
fails to assemble because the no-op bit and it accidentally
creates is not a valid relocation:
```
.long a&-1
```
The fix is to treat a narrowing PtrToInt exactly the same as
it already treats Trunc: just emit the expression and let
the assembler deal with truncating it in the appropriate way.
Patch by Mat Hostetter <mjh@fb.com>.
Differential Revision: https://reviews.llvm.org/D61325
llvm-svn: 361508
Refactor location description kind in order to be easier for extensions
(needed for D60866).
In addition, cut off some bits from the other class fields.
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D62002
llvm-svn: 361480
Keep it optional in cases this is ever needed in some global
context. Currently it's only used for getting an upper bound inline
asm code size.
For AMDGPU, gfx10 increases the maximum instruction size to
20-bytes. This avoids penalizing older subtargets when estimating code
size, and making some annoying branch relaxation test adjustments.
llvm-svn: 361405
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
llvm-svn: 361356
Register coalescer fails for the test in the patch with the assertion in
JoinVals::ConflictResolution `DefMI != nullptr'. It attempts to join
live intervals for two adjacent instructions and erase the copy:
%2:vreg_256 = COPY %1
%3:vreg_256 = COPY killed %1
The LI needs to be adjusted to kill subrange for the erased instruction
and extend the subrange of the original def. That was done for the main
interval only but not for the subrange. As a result subrange had a VNI
pointing to the erased slot resulting in the above failure.
Differential Revision: https://reviews.llvm.org/D62162
llvm-svn: 361293
Add an intrinsic that takes 2 signed integers with the scale of them provided
as the third argument and performs fixed point multiplication on them. The
result is saturated and clamped between the largest and smallest representable
values of the first 2 operands.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D55720
llvm-svn: 361289
DAGCombiner simplifies this more liberally as:
// If inserting an UNDEF, just return the original vector.
if (N1.isUndef())
return N0;
So there's no way to make this visible in output AFAIK, but
doing this at node creation time should be slightly more efficient.
llvm-svn: 361287
getNode() squashes concatenation of undefs via FoldCONCAT_VECTORS():
// Concat of UNDEFs is UNDEF.
if (llvm::all_of(Ops, [](SDValue Op) { return Op.isUndef(); }))
return DAG.getUNDEF(VT);
llvm-svn: 361284
There are no FP callers of DAGCombiner::reassociateOps() currently,
but we can add a fast-math check to make sure this API is not being
misused.
This was noted as a potential risk (and that risk might increase) with:
D62191
llvm-svn: 361268
Summary:
The endianess used in the calling convention does not always match the
endianess of the target on all architectures, namely AVR.
When an argument is too large to be legalised by the architecture and is
split for the ABI, a new hook TargetLoweringInfo::shouldSplitFunctionArgumentsAsLittleEndian
is queried to find the endianess that function arguments must be laid
out in.
This approach was recommended by Eli Friedman.
Originally reported in https://github.com/avr-rust/rust/issues/129.
Patch by Carl Peto.
Reviewers: bogner, t.p.northover, RKSimon, niravd, efriedma
Reviewed By: efriedma
Subscribers: JDevlieghere, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62003
llvm-svn: 361222
Since INLINEASM_BR is a terminator we need to flush the pending exports before
emitting it. If we don't do this, a TokenFactor can be inserted between it and
the BR instruction emitted to finish the callbr lowering.
It looks like nodes are glued to the INLINEASM_BR so I had to make sure we emit
the TokenFactor before that.
Differential Revision: https://reviews.llvm.org/D59981
llvm-svn: 361177
We shouldn't really make assumptions about possible sizes for long and long long. And longer term we should probably support vectorizing these intrinsics. By making the result types not fixed we can support vectors as well.
Differential Revision: https://reviews.llvm.org/D62026
llvm-svn: 361169
This changes the isShift variable to include the constant operand
check that was previously in the if statement.
While there fix an 80 column violation and an unnecessary use of
getNode. Also fix variable name capitalization.
llvm-svn: 361168
Fixes issue reported by aemerson on D57348. Vector op legalization
support is added for uaddo, usubo, saddo and ssubo (umulo and smulo
were already supported). As usual, by extracting TargetLowering methods
and calling them from vector op legalization.
Vector op legalization doesn't really deal with multiple result nodes,
so I'm explicitly performing a recursive legalization call on the
result value that is not being legalized.
There are some existing test changes because expansion happens
earlier, so we don't get a DAG combiner run in between anymore.
Differential Revision: https://reviews.llvm.org/D61692
llvm-svn: 361166
The code did not match the example in the comment, and was checking
the undef flag on the copy dest instead of source. The existing tests
were only hitting the > 2 operands case.
llvm-svn: 361156
Refactor DIExpression::With* into a flag enum in order to be less
error-prone to use (as discussed on D60866).
Patch by Djordje Todorovic.
Differential Revision: https://reviews.llvm.org/D61943
llvm-svn: 361137
This is ported from the custom AMDGPU DAG implementation. I think this
is a better default expansion than what the DAG currently uses, at
least if the target has CTLZ.
This implements the signed version in terms of the unsigned
conversion, which is implemented with bit operations. SelectionDAG has
several other implementations that should eventually be ported
depending on what instructions are legal.
llvm-svn: 361081
Summary:
That check claims that the transform is illegal otherwise.
That isn't true:
1. For `ISD::ADD`, we only process `ISD::SHL` outer shift => sign bit does not matter
https://rise4fun.com/Alive/K4A
2. For `ISD::AND`, there is no restriction on constants:
https://rise4fun.com/Alive/Wy3
3. For `ISD::OR`, there is no restriction on constants:
https://rise4fun.com/Alive/GOH
3. For `ISD::XOR`, there is no restriction on constants:
https://rise4fun.com/Alive/ml6
So, why is it there then?
This changes the testcase that was touched by @spatel in rL347478,
but i'm not sure that test tests anything particular?
Reviewers: RKSimon, spatel, craig.topper, jojo, rengolin
Reviewed By: spatel
Subscribers: javed.absar, llvm-commits, spatel
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61918
llvm-svn: 361044
This patch implements a limited form of autolinking primarily designed to allow
either the --dependent-library compiler option, or "comment lib" pragmas (
https://docs.microsoft.com/en-us/cpp/preprocessor/comment-c-cpp?view=vs-2017) in
C/C++ e.g. #pragma comment(lib, "foo"), to cause an ELF linker to automatically
add the specified library to the link when processing the input file generated
by the compiler.
Currently this extension is unique to LLVM and LLD. However, care has been taken
to design this feature so that it could be supported by other ELF linkers.
The design goals were to provide:
- A simple linking model for developers to reason about.
- The ability to to override autolinking from the linker command line.
- Source code compatibility, where possible, with "comment lib" pragmas in other
environments (MSVC in particular).
Dependent library support is implemented differently for ELF platforms than on
the other platforms. Primarily this difference is that on ELF we pass the
dependent library specifiers directly to the linker without manipulating them.
This is in contrast to other platforms where they are mapped to a specific
linker option by the compiler. This difference is a result of the greater
variety of ELF linkers and the fact that ELF linkers tend to handle libraries in
a more complicated fashion than on other platforms. This forces us to defer
handling the specifiers to the linker.
In order to achieve a level of source code compatibility with other platforms
we have restricted this feature to work with libraries that meet the following
"reasonable" requirements:
1. There are no competing defined symbols in a given set of libraries, or
if they exist, the program owner doesn't care which is linked to their
program.
2. There may be circular dependencies between libraries.
The binary representation is a mergeable string section (SHF_MERGE,
SHF_STRINGS), called .deplibs, with custom type SHT_LLVM_DEPENDENT_LIBRARIES
(0x6fff4c04). The compiler forms this section by concatenating the arguments of
the "comment lib" pragmas and --dependent-library options in the order they are
encountered. Partial (-r, -Ur) links are handled by concatenating .deplibs
sections with the normal mergeable string section rules. As an example, #pragma
comment(lib, "foo") would result in:
.section ".deplibs","MS",@llvm_dependent_libraries,1
.asciz "foo"
For LTO, equivalent information to the contents of a the .deplibs section can be
retrieved by the LLD for bitcode input files.
LLD processes the dependent library specifiers in the following way:
1. Dependent libraries which are found from the specifiers in .deplibs sections
of relocatable object files are added when the linker decides to include that
file (which could itself be in a library) in the link. Dependent libraries
behave as if they were appended to the command line after all other options. As
a consequence the set of dependent libraries are searched last to resolve
symbols.
2. It is an error if a file cannot be found for a given specifier.
3. Any command line options in effect at the end of the command line parsing apply
to the dependent libraries, e.g. --whole-archive.
4. The linker tries to add a library or relocatable object file from each of the
strings in a .deplibs section by; first, handling the string as if it was
specified on the command line; second, by looking for the string in each of the
library search paths in turn; third, by looking for a lib<string>.a or
lib<string>.so (depending on the current mode of the linker) in each of the
library search paths.
5. A new command line option --no-dependent-libraries tells LLD to ignore the
dependent libraries.
Rationale for the above points:
1. Adding the dependent libraries last makes the process simple to understand
from a developers perspective. All linkers are able to implement this scheme.
2. Error-ing for libraries that are not found seems like better behavior than
failing the link during symbol resolution.
3. It seems useful for the user to be able to apply command line options which
will affect all of the dependent libraries. There is a potential problem of
surprise for developers, who might not realize that these options would apply
to these "invisible" input files; however, despite the potential for surprise,
this is easy for developers to reason about and gives developers the control
that they may require.
4. This algorithm takes into account all of the different ways that ELF linkers
find input files. The different search methods are tried by the linker in most
obvious to least obvious order.
5. I considered adding finer grained control over which dependent libraries were
ignored (e.g. MSVC has /nodefaultlib:<library>); however, I concluded that this
is not necessary: if finer control is required developers can fall back to using
the command line directly.
RFC thread: http://lists.llvm.org/pipermail/llvm-dev/2019-March/131004.html.
Differential Revision: https://reviews.llvm.org/D60274
llvm-svn: 360984
Summary:
This emits S_CONSTANT records for global variables.
Currently this emits records for the global variables already being tracked in the
LLVM IR metadata, which are just constant global variables; we'll also want S_CONSTANTs
for static data members and enums.
Related to https://bugs.llvm.org/show_bug.cgi?id=41615
Reviewers: rnk
Subscribers: aprantl, hiraditya, llvm-commits, thakis
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61926
llvm-svn: 360948
The recent introduction of v3i32 etc as an MVT, and its use in AMDGPU
3-dword memory instructions, caused a de-optimization problem for code
with such a load that then bitcasts via vector of i8, because v12i8 is
not an MVT so it legalizes the bitcast by widening it.
This commit adds the ability to widen a bitcast using extract_subvector
on the result, so the value does not need to go via memory.
Differential Revision: https://reviews.llvm.org/D60457
Change-Id: Ie4abb7760547e54a2445961992eafc78e80d4b64
llvm-svn: 360942
This patch add the ISD::LROUND and ISD::LLROUND along with new
intrinsics. The changes are straightforward as for other
floating-point rounding functions, with just some adjustments
required to handle the return value being an interger.
The idea is to optimize lround/llround generation for AArch64
in a subsequent patch. Current semantic is just route it to libm
symbol.
llvm-svn: 360889
Trace through multiple COPYs when looking for a physreg source. Add
hinting for vregs that will be copied into physregs (we only hinted
for vregs getting copied to a physreg previously). Give hinted a
register a bonus when deciding which value to spill. This is part of
my rewrite regallocfast series. In fact this one doesn't even have an
effect unless you also flip the allocation to happen from back to
front of a basic block. Nonetheless it helps to split this up to ease
review of D52010
Patch by Matthias Braun
llvm-svn: 360887
Before this change, they were erroneously constructed with the EH_LABEL
SDNode opcode, which caused other passes to interact with them in
incorrect ways. See the FIXME about fastisel that this addresses in the
existing test case.
Fixes PR41890
llvm-svn: 360818
Summary:
Analogous to the other ChangeToXXX methods. See the next patch for a
use case.
Change-Id: I6548d614706834fb9109ab3c8fe915e9c6ece2a7
Reviewers: arsenm, kzhuravl
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61651
llvm-svn: 360789
Summary:
The emitError path allows the program to continue, unlike report_fatal_error.
This is friendlier to use cases where LLVM is embedded in a larger program,
because the caller may be able to deal with the error somewhat gracefully.
Change the number of requested NOP bytes in the AArch64 and PowerPC
test cases to avoid triggering an unrelated assertion. The compilation
still fails, as verified by the test.
Change-Id: Iafb9ca341002a597b82e59ddc7a1f13c78758e3d
Reviewers: arsenm, MatzeB
Subscribers: qcolombet, nemanjai, wdng, javed.absar, kristof.beyls, kbarton, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61489
llvm-svn: 360786
The 3-field form was introduced by D3499 in 2014 and the legacy 2-field
form was planned to be removed in LLVM 4.0
For the textual format, this patch migrates the existing 2-field form to
use the 3-field form and deletes the compatibility code.
test/Verifier/global-ctors-2.ll checks we have a friendly error message.
For bitcode, lib/IR/AutoUpgrade UpgradeGlobalVariables will upgrade the
2-field form (add i8* null as the third field).
Reviewed By: rnk, dexonsmith
Differential Revision: https://reviews.llvm.org/D61547
llvm-svn: 360742
The condition !AddrPool.empty() is tested before attachRangesOrLowHighPC(), which may add an entry to AddrPool. We emit DW_AT_low_pc (DW_FORM_addrx) but may incorrectly omit DW_AT_addr_base for LineTablesOnly. This can be easily reproduced:
clang -gdwarf-5 -gmlt -c a.cc
Fix this by moving !AddrPool.empty() below.
This was discovered while investigating an lld crash (fixed by D61889) on such object files: ld.lld --gdb-index a.o
Reviewed By: probinson
Differential Revision: https://reviews.llvm.org/D61891
llvm-svn: 360678
When breaking up loads and stores of aggregates, the IRTranslator uses
LLT::scalar(64) for the index type of the G_GEP instructions that
compute the addresses. This is unnecessarily large for 32-bit targets.
Use the int ptr type provided by the DataLayout instead.
Note that we're already doing the right thing when translating
getelementptr instructions from the IR. This is just an oversight when
generating new ones while translating loads/stores.
Both x86 and AArch64 already have tests confirming that the old
behaviour is preserved for 64-bit targets.
Differential Revision: https://reviews.llvm.org/D61852
llvm-svn: 360656
Summary:
X86TargetLowering::LowerAsmOperandForConstraint had better support than
TargetLowering::LowerAsmOperandForConstraint for arbitrary depth
getelementpointers for "i", "n", and "s" extended inline assembly
constraints. Hoist its support from the derived class into the base
class.
Link: https://github.com/ClangBuiltLinux/linux/issues/469
Reviewers: echristo, t.p.northover
Reviewed By: t.p.northover
Subscribers: t.p.northover, E5ten, kees, jyknight, nemanjai, javed.absar, eraman, hiraditya, jsji, llvm-commits, void, craig.topper, nathanchance, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61560
llvm-svn: 360604
We catch most of these patterns (on x86 at least) by matching
a concat vectors opcode early in combining, but the pattern may
emerge later using insert subvector instead.
The AVX1 diffs for add/sub overflow show another missed narrowing
pattern. That one may be falling though the cracks because of
combine ordering and multiple uses.
llvm-svn: 360585
The new fptrunc and fpext intrinsics are constrained versions of the
regular fptrunc and fpext instructions.
Reviewed by: Andrew Kaylor, Craig Topper, Cameron McInally, Conner Abbot
Approved by: Craig Topper
Differential Revision: https://reviews.llvm.org/D55897
llvm-svn: 360581
Summary:
When we know for sure whether two addresses do or do not alias, we
should immediately return from DAGCombiner::isAlias().
I think this comes from a bad copy/paste, Sorry for not catching that during the
code review.
Fixes PR41855.
Reviewers: niravd, gchatelet, EricWF
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61846
llvm-svn: 360566
I've included a new fix in X86RegisterInfo to prevent PR41619 without
reintroducing r359392. We might be able to improve that in the base class
implementation of shouldRewriteCopySrc somehow. But this hopefully enables
forward progress on SimplifyDemandedBits improvements for now.
Original commit message:
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGComb
but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
llvm-svn: 360552
I noticed that we were failing to narrow an x86 ymm math op in a case similar
to the 'madd' test diff. That is because a bitcast is sitting between the math
and the extract subvector and thwarting our pattern matching for narrowing:
t56: v8i32 = add t59, t58
t68: v4i64 = bitcast t56
t73: v2i64 = extract_subvector t68, Constant:i64<2>
t96: v4i32 = bitcast t73
There are a few wins and neutral diffs in the other tests.
Differential Revision: https://reviews.llvm.org/D61806
llvm-svn: 360541
We already updated the LegalizedNodes map at the end of the Expand call. This
would have marked the new node as being mapped to itself. So the LegalizeOp
call will find that an immediately return.
llvm-svn: 360472
Split out from D61692 per RKSimon's suggestion. Vector op
legalization will automatically recursively legalize the returned
SDValue, but we need to take care of the other results ourselves.
Otherwise it will end up getting legalized only during op
legalization, by which point it might be too late (though I'm not
aware of any specific cases right now).
There are codegen differences because expansion occurs earlier now
and we don't get a DAGCombiner run in between.
Differential Revision: https://reviews.llvm.org/D61744
llvm-svn: 360470
Follow up to r359122, after a bug was reported in it - the original
change too aggressively tried to move related types out of type units,
which included unnamed types (like array types) which can't reasonably
be declared-but-not-defined.
A step beyond that is that some types in type units can be anonymous, if
they are types with a name for linkage purposes (eg: "typedef struct { }
x;"). So ensure those don't get turned into plain declarations (without
signatures) because, lacking names, they can't be resolved to the
definition.
[Also include a fix for llvm-dwarfdump/libDebugInfoDWARF to pretty print
types in type units]
llvm-svn: 360458
This fix allows the scheduler to take into account the number of instances of
each ProcResource specified. Previously a declaration in a scheduler of
ProcResource<1> would be treated identically to a declaration of
ProcResource<2>. Now the hazard recognizer would report a hazard only after all
of the resource instances are busy.
Patch by Jackson Woodruff and Momchil Velikov.
Differential Revision: https://reviews.llvm.org/D51160
llvm-svn: 360441
To find the candidates to merge stores we iterate over all nodes in a chain
for each store, which leads to quadratic compile times for large basic blocks
with a large number of stores.
Reviewers: niravd, spatel, craig.topper
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D61511
llvm-svn: 360357
Prior to this change sub-register index names are assumed to be lower
case (but they are printed with original casing). This means that if a
target has some upper case characters in its sub-register names then
mir-export directly followed by mir-import is not possible. This also
means that sub-register indices currently are (and will continue to be)
slightly inconsistent with register names which are printed and assumed
to be lower case.
As the current textual representation of mir has a few inconsistencies
in this area it is a bit arbitrary how to address the matter. This
change is towards the direction that we feel is most correct (i.e. case
sensitivity).
Differential Revision: https://reviews.llvm.org/D61499
llvm-svn: 360318
Klocwork static check:
Pointer from call to function `DebugLoc::operator DILocation *() const `
may be NULL and will be dereference in function `printExtendedName```
Patch by Shengchen Kan (skan)
Differential Revision: https://reviews.llvm.org/D61715
llvm-svn: 360317
This patch allows for expansion of ADDCARRY and SUBCARRY when the target does not support it.
Differential Revision: https://reviews.llvm.org/D61411
llvm-svn: 360303
as it was causing significant compile time regressions.
This reverts commit r359426 while we come up with testcases and additional ideas.
llvm-svn: 360301
This is extracted from the original draft of D61419 with some additional tests.
We don't currently get this in IR (it's conservatively turned into a NaN),
but presumably that'll get updated as we add real IR support for 'fneg'
rather than 'fsub -0.0, x'.
The x86-32 run shows the following, and I haven't looked further to see why,
but that seems to be independent:
Legalizing: t1: f32 = undef
Trying to expand node
Creating fp constant: t4: f32 = ConstantFP<0.000000e+00>
Differential Revision: https://reviews.llvm.org/D61516
llvm-svn: 360296
When assigning the definitions of an instruction we were updating
the available registers while walking the definitions. Some of
those definitions may be from physical registers and thus, they are
not available for other definitions to take, but by the time we see
that we may have already assign these registers to another
virtual register.
Fix that by walking through all the definitions and mark as unavailable
the physical register definitions, then do the virtual register assignments.
PR41790
llvm-svn: 360278
This patch adds support for calling selectFNeg for FNeg instructions in addition to the fsub idiom
Differential Revision: https://reviews.llvm.org/D61624
llvm-svn: 360273
Add a new function to do the endian check, as I will commit another patch later, which will also need the endian check.
Differential Revision: https://reviews.llvm.org/D61236
llvm-svn: 360226
Summary:
The DEBUG_TYPE of the default hazard recognizer should be updated to
match the DEBUG_TYPE of the machine-scheduler pass.
Reviewers: rampitec
Reviewed By: rampitec
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61359
llvm-svn: 360198
DWARF5, 2.12 20ff says that
Any debugging information entry representing a pointer or reference
type [may have a DW_AT_address_class attribute].
The existing code (https://reviews.llvm.org/D29670) seems to take a
quite literal interpretation of that wording. I don't see a reason why
an rvalue reference isn't a reference type in the spirit of that
paragraph. This patch allows rvalue references to also have address
spaces.
rdar://problem/50511483
Differential Revision: https://reviews.llvm.org/D61625
llvm-svn: 360176
When simplifying TokenFactors, we potentially iterate over all
operands of a large number of TokenFactors. This causes quadratic
compile times in some cases and the large token factors cause additional
scalability problems elsewhere.
This patch adds some limits to the number of nodes explored for the
cases mentioned above.
Reviewers: niravd, spatel, craig.topper
Reviewed By: niravd
Differential Revision: https://reviews.llvm.org/D61397
llvm-svn: 360171
Summary:
If fneg lowering for fsub -0.0, x fails we currently fall back to treating it as an fsub. This has different behavior for nans than the xor with sign bit trick we normally try to do. On X86, the xor trick for double fails fast-isel in 32-bit mode with sse2 due to 64 bit integer types not being available. With -O2 we would always use an xorpd for this case. If we use subsd, this creates an observable behavior difference between -O0 and -O2. So fall back to SelectionDAG if we can't fast-isel it, that way SelectionDAG will use the xorpd.
I believe this patch is restoring the behavior prior to r345295 from last October. This was missed then because our fast isel case in 32-bit mode aborted fast-isel earlier for another reason. But I've added new tests to cover that.
Reviewers: andrew.w.kaylor, cameron.mcinally, spatel, efriedma
Reviewed By: cameron.mcinally
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61622
llvm-svn: 360111
TypedDINodeRef<T> is a redundant wrapper of Metadata * that is actually a T *.
Accordingly, change DI{Node,Scope,Type}Ref uses to DI{Node,Scope,Type} * or their const variants.
This allows us to delete many resolve() calls that clutter the code.
Reviewed By: rnk
Differential Revision: https://reviews.llvm.org/D61369
llvm-svn: 360108
Summary:
When there are multiple instances of a forward decl record type, only the first one is emitted with a type index, because
the type is added to a map with a null type index. Avoid this by reordering so that forward decl types aren't added to the map.
Reviewers: rnk
Subscribers: aprantl, hiraditya, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61460
llvm-svn: 360101
The problem was that we were creating a CMOV64rr <TargetFrameIndex>, <TargetFrameIndex>. The entire point of a TFI is that address code is not generated, so there's no way to legalize/lower this. Instead, simply prevent it's creation.
Arguably, we shouldn't be using *Target*FrameIndices in StatepointLowering at all, but that's a much deeper change.
llvm-svn: 360090
It's possible to use the 'y' mmx constraint with a type narrower than 64-bits.
This patch supports this by bitcasting the mmx type to 64-bits and then
truncating to the desired type.
There are probably other missing type combinations we need to support, but this
is the case we have a bug report for.
Fixes PR41748.
Differential Revision: https://reviews.llvm.org/D61582
llvm-svn: 360069
Reverts "[X86] Remove (V)MOV64toSDrr/m and (V)MOVDI2SSrr/m. Use 128-bit result MOVD/MOVQ and COPY_TO_REGCLASS instead"
Reverts "[TargetLowering][AMDGPU][X86] Improve SimplifyDemandedBits bitcast handling"
Eric Christopher and Jorge Gorbe Moya reported some issues with these patches to me off list.
Removing the CodeGenOnly instructions has changed how fneg is handled during fast-isel with sse/sse2. We're now emitting fsub -0.0, x instead
moving to the integer domain(in a GPR), xoring the sign bit, and then moving back to xmm. This is because the fast isel table no longer
contains an entry for (f32/f64 bitcast (i32/i64)) so the target independent fneg code fails. The use of fsub changes the behavior of nan with
respect to -O2 codegen which will always use a pxor. NOTE: We still have a difference with double with -m32 since the move to GPR doesn't work
there. I'll file a separate PR for that and add test cases.
Since removing the CodeGenOnly instructions was fixing PR41619, I'm reverting r358887 which exposed that PR. Though I wouldn't be surprised
if that bug can still be hit independent of that.
This should hopefully get Google back to green. I'll work with Simon and other X86 folks to figure out how to move forward again.
llvm-svn: 360066
This addresses one half of https://bugs.llvm.org/show_bug.cgi?id=41635
by combining a VECREDUCE_AND/OR into VECREDUCE_UMIN/UMAX (if latter is
legal but former is not) for zero-or-all-ones boolean reductions (which
are detected based on sign bits).
Differential Revision: https://reviews.llvm.org/D61398
llvm-svn: 360054
Based on PR41748, not all cases are handled in this function.
llvm_unreachable is treated as an optimization hint than can prune code paths
in a release build. This causes weird behavior when PR41748 is encountered on a
release build. It appears to generate an fp_round instruction from the floating
point code.
Making this a report_fatal_error prevents incorrect optimization of the code
and will instead generate a message to file a bug report.
llvm-svn: 360008
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
This is a subset of the original commit from rL359879
which was reverted because it could crash when using the 'RemovedInstructions'
structure that enables delayed deletion of dead instructions. The motivating
compile-time win does not require that change though. We should get most of
that win from this change alone.
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359969
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
Also, we were restarting the iterator loops when doing the overflow intrinsic
transforms by marking the dominator tree for update. That was done to prevent
iterating over a removed instruction. But we can postpone the deletion using
the existing "RemovedInsts" structure, and that means we don't need to update
the DT.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359879
This is the second part of the commit fixing PR38917 (hoisting
partitially redundant machine instruction). Most of PRE (partitial
redundancy elimination) and CSE work is done on LLVM IR, but some of
redundancy arises during DAG legalization. Machine CSE is not enough
to deal with it. This simple PRE implementation works a little bit
intricately: it passes before CSE, looking for partitial redundancy
and transforming it to fully redundancy, anticipating that the next
CSE step will eliminate this created redundancy. If CSE doesn't
eliminate this, than created instruction will remain dead and eliminated
later by Remove Dead Machine Instructions pass.
The third part of the commit is supposed to refactor MachineCSE,
to make it more clear and to merge MachinePRE with MachineCSE,
so one need no rely on further Remove Dead pass to clear instrs
not eliminated by CSE.
First step: https://reviews.llvm.org/D54839
Fixes llvm.org/PR38917
Reviewers: RKSimon
Subscribers: hfinkel, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D56772
llvm-svn: 359870
We use to incorrectly use the store size instead of the alloc size when
creating the stack slot for allocas.
On aarch64 this can be demonstrated by allocating weirdly sized types.
For instance, in the added test case, we use an alloca for i19. We used
to allocate a slot of size 24-bit (19 rounded up to the next byte),
whereas we really want to use a full 32-bit slot for this type.
llvm-svn: 359856
The primary fix here is to WinException.cpp: we need to exclude jump
tables when computing the length of a function, or else we fail to
correctly compute the length. (We can only compute the number of bytes
consumed by certain assembler directives after the entire file is
parsed. ".p2align" is one of those directives, and is used by jump table
generation.)
The secondary fix, to MCWin64EH, is to make sure we don't silently
miscompile if we hit a similar situation in the future.
It's possible we could extend ARM64EmitUnwindInfo so it allows function
bodies that contain assembler directives, but that's a lot more
complicated; see the FIXME in MCWin64EH.cpp.
Fixes https://bugs.llvm.org/show_bug.cgi?id=41581 .
Differential Revision: https://reviews.llvm.org/D61095
llvm-svn: 359849
As a result of the underlying cause of PR41678 we created an ANY_EXTEND node with a scalar result type and v1i1 input type. Ideally we would have asserted for this instead of letting it go through to instruction selection and generate bad machine IR
Differential Revision: https://reviews.llvm.org/D61463
llvm-svn: 359836
The original patch was committed at rL359398 and reverted at rL359695 because of
infinite looping.
This includes a fix to check for a vector splat of "1.0" to avoid the infinite loop.
Original commit message:
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359793
We don't have FP exception limits in the IR constant folder for the binops (apart from strict ops),
so it does not make sense to have them here in the DAG either. Nothing else in the backend tries
to preserve exceptions (again outside of strict ops), so I don't see how this could have ever
worked for real code that cares about FP exceptions.
There are still cases (examples: unary opcodes in SDAG, FMA in IR) where we are trying (at least
partially) to preserve exceptions without even asking if the target supports FP exceptions. Those
should be corrected in subsequent patches.
Real support for FP exceptions requires several changes to handle the constrained/strict FP ops.
Differential Revision: https://reviews.llvm.org/D61331
llvm-svn: 359791
In preparation for supporting ILP32 on AArch64, this modifies the SelectionDAG
builder code so that pointers are allowed to have a larger type when "live" in
the DAG compared to memory.
Pointers get zero-extended whenever they are loaded, and truncated prior to
stores. In addition, a few not quite so obvious locations need updating:
* A GEP that has not been marked inbounds needs to enforce the IR-documented
2s-complement wrapping at the memory pointer size. Inbounds GEPs are
undefined if they overflow the address space, so no additional operations
are needed.
* Signed comparisons would give incorrect results if performed on the
zero-extended values.
This shouldn't affect CodeGen for now, but will become active when the AArch64
ILP32 support is committed.
llvm-svn: 359676
We don't have this restriction in IR, so it should not be here
either simply out of consistency. Code that wants to handle FP
exceptions is expected to use the 'strict' variants of these
nodes.
We don't get the frem case because frem by 0.0 produces NaN (invalid),
and that's the remaining check here (so the removed check for frem
was dead code AFAIK).
This is the only place in SDAG that uses "HasFPExceptions", so I
think we should remove that entirely as a follow-up patch.
llvm-svn: 359566
This was a local static funtion in SelectionDAG, which I've promoted to
TargetLowering so that I can reuse it to estimate the cost of a memory
operation in D59787.
Differential Revision: https://reviews.llvm.org/D59766
llvm-svn: 359543
The MachineFunction wasn't used in getOptimalMemOpType, but more importantly,
this allows reuse of findOptimalMemOpLowering that is calling getOptimalMemOpType.
This is the groundwork for the changes in D59766 and D59787, that allows
implementation of TTI::getMemcpyCost.
Differential Revision: https://reviews.llvm.org/D59785
llvm-svn: 359537
The PrologEpilogInserter need to insert a DW_OP_deref_size before
prepending a memory location expression to an already implicit
expression to avoid having the existing expression act on the memory
address instead of the value behind it.
The reason for using DW_OP_deref_size and not plain DW_OP_deref is that
big-endian targets need to read the right size as simply truncating a
larger read would yield the wrong result (LSB bytes are not at the lower
address).
This re-commit fixes issues reported in the first one. Namely deref was
inserted under wrong conditions and additionally the deref_size argument
was incorrectly encoded.
Differential Revision: https://reviews.llvm.org/D59687
llvm-svn: 359535
Do not combine (trunc adde(X, Y, Carry)) into (adde trunc(X), trunc(Y), Carry),
if adde is not legal for the target. Even it's at type-legalize phase.
Because adde is special and will not be legalized at operation-legalize phase later.
This fixes: PR40922
https://bugs.llvm.org/show_bug.cgi?id=40922
Differential Revision: https://reviews.llvm.org//D60854
llvm-svn: 359532
* LegalizeAction should be printed by name rather than number
* Newly created instructions are incomplete at the point the observer first sees
them. They are therefore recorded in a small vector and printed just before
the legalizer moves on to another instruction. By this point, the instruction
must be complete.
llvm-svn: 359481
Summary:
Extract the logic for doing reassociations
from DAGCombiner::reassociateOps into a helper
function DAGCombiner::reassociateOpsCommutative,
and use that helper to trigger reassociation
on the original operand order, or the commuted
operand order.
Codegen is not identical since the operand order will
be different when doing the reassociations for the
commuted case. That causes some unfortunate churn in
some test cases. Apart from that this should be NFC.
Reviewers: spatel, craig.topper, tstellar
Reviewed By: spatel
Subscribers: dmgreen, dschuff, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, hiraditya, aheejin, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61199
llvm-svn: 359476
This patch fixes PR40795, where constant-valued variable locations can
"leak" into blocks placed at higher addresses. The root of this is that
DbgEntityHistoryCalculator terminates all register variable locations at
the end of each block, but not constant-value variable locations.
Fixing this requires constant-valued DBG_VALUE instructions to be
broadcast into all blocks where the variable location remains valid, as
documented in the LiveDebugValues section of SourceLevelDebugging.rst,
and correct termination in DbgEntityHistoryCalculator.
Differential Revision: https://reviews.llvm.org/D59431
llvm-svn: 359426
This was originally part of D61028, but it's an independent diff.
If we try the repeated divisor reciprocal transform before producing an estimate sequence,
then we have an opportunity to use scalar fdiv. On x86, the trade-off is 1 divss vs. 5
vector FP ops in the default estimate sequence. On recent chips (Skylake, Ryzen), the
full-precision division is only 3 cycle throughput, so that's probably the better perf
default option and avoids problems from x86's inaccurate estimates.
The last 2 tests show that users still have the option to override the defaults by using
the function attributes for reciprocal estimates, but those patterns are potentially made
faster by converting the vector ops (including ymm ops) to scalar math.
Differential Revision: https://reviews.llvm.org/D61149
llvm-svn: 359398
Summary:
Targets like ARM, MSP430, PPC, and SystemZ have complex behavior when
printing the address of a MachineOperand::MO_GlobalAddress. Move that
handling into a new overriden method in each base class. A virtual
method was added to the base class for handling the generic case.
Refactors a few subclasses to support the target independent %a, %c, and
%n.
The patch also contains small cleanups for AVRAsmPrinter and
SystemZAsmPrinter.
It seems that NVPTXTargetLowering is possibly missing some logic to
transform GlobalAddressSDNodes for
TargetLowering::LowerAsmOperandForConstraint to handle with "i" extended
inline assembly asm constraints.
Fixes:
- https://bugs.llvm.org/show_bug.cgi?id=41402
- https://github.com/ClangBuiltLinux/linux/issues/449
Reviewers: echristo, void
Reviewed By: void
Subscribers: void, craig.topper, jholewinski, dschuff, jyknight, dylanmckay, sdardis, nemanjai, javed.absar, sbc100, jgravelle-google, eraman, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, jrtc27, atanasyan, jsji, llvm-commits, kees, tpimh, nathanchance, peter.smith, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60887
llvm-svn: 359337
As detailed on PR40758, Bobcat/Jaguar can perform vector immediate shifts on the same pipes as vector ANDs with the same latency - so it doesn't make sense to replace a shl+lshr with a shift+and pair as it requires an additional mask (with the extra constant pool, loading and register pressure costs).
Differential Revision: https://reviews.llvm.org/D61068
llvm-svn: 359293
When constrainRegClass is called if the constraining happens on a use the COPY
needs to be inserted before the instruction that contains the MachineOperand,
but if we are constraining a definition it actually needs to be added
after the instruction. In addition, the COPY needs to have its operands
flipped (in the use case we are copying from the old unconstrained register
to the new constrained register, while in the definition case we are copying
from the new constrained register that the instruction defines to the old
unconstrained register).
llvm-svn: 359282
We had special case handling here, but it uses a scalar any_extend for the
promotion then bitcasts to the final type. This won't split up the input data
into multiple promoted elements like we need.
This patch falls back to doing the conversion through memory.
Fixes PR41594 which I believe was reflected in the bitcast-vector-bool.ll
changes. The changes to vector-half-conversions.ll are fixing a previously
unknown miscompile from this issue.
Differential Revision: https://reviews.llvm.org/D61114
llvm-svn: 359219
Add legalizer support for G_FNEARBYINT. It's the same as G_FCEIL etc.
Since the importer allows us to automatically select this after legalization,
also add tests for selection etc. Also update arm64-vfloatintrinsics.ll.
llvm-svn: 359204
Translate llvm.nearbyint into G_FNEARBYINT as a simple intrinsic. Update
arm64-irtranslator.ll.
Differential Revision: https://reviews.llvm.org/D60922
llvm-svn: 359203
Summary:
This emits labels around heapallocsite calls and S_HEAPALLOCSITE debug
info in codeview. Currently only changes FastISel, so emitting labels still
needs to be implemented in SelectionDAG.
Reviewers: rnk
Subscribers: aprantl, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D61083
llvm-svn: 359149
If we have a vector FP division with a splatted divisor, use the existing transform
that converts 'x/y' into 'x * (1.0/y)' to allow more conversions. This can then
potentially be converted into a scalar FP division by existing combines (rL358984)
as seen in the tests here.
That can be a potentially big perf difference if scalar fdiv has better timing
(including avoiding possible frequency throttling for vector ops).
Differential Revision: https://reviews.llvm.org/D61028
llvm-svn: 359147
While this doesn't come up in reasonable cases currently (the only user
defined types not in type units are ones without linkage - which makes
for near-ODR violations, because it'd be a type with linkage referencing
a type without linkage - such a type can't be validly defined in more
than one TU, so arguably it shouldn't be in a type unit to begin with -
but it's a convenient way to demonstrate an issue that will become more
revalent with homed modular debug info type definitions - which also
don't need to be in type units but more legitimately so).
Precursor to the Clang change to de-type-unit (by omitting the
'identifier') types homed due to strong linkage vtables. (making that
change without this one would lead to major type duplication in type
units)
llvm-svn: 359122
Summary:
Both the input Value pointer and the returned Value
pointers in GetUnderlyingObjects are now declared as
const.
It turned out that all current (in-tree) uses of
GetUnderlyingObjects were trivial to update, being
satisfied with have those Value pointers declared
as const. Actually, in the past several of the users
had to use const_cast, just because of ValueTracking
not providing a version of GetUnderlyingObjects with
"const" Value pointers. With this patch we get rid
of those const casts.
Reviewers: hfinkel, materi, jkorous
Reviewed By: jkorous
Subscribers: dexonsmith, jkorous, jholewinski, sdardis, eraman, hiraditya, jrtc27, atanasyan, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61038
llvm-svn: 359072
* Add support for uniquing strings in the remark streamer and emitting the string table in the remarks section.
* Add parsing support for the string table in the RemarkParser.
From this remark:
```
--- !Missed
Pass: inline
Name: NoDefinition
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 7, Column: 3 }
Function: printArgsNoRet
Args:
- Callee: printf
- String: ' will not be inlined into '
- Caller: printArgsNoRet
DebugLoc: { File: 'test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c',
Line: 6, Column: 0 }
- String: ' because its definition is unavailable'
...
```
to:
```
--- !Missed
Pass: 0
Name: 1
DebugLoc: { File: 3, Line: 7, Column: 3 }
Function: 2
Args:
- Callee: 4
- String: 5
- Caller: 2
DebugLoc: { File: 3, Line: 6, Column: 0 }
- String: 6
...
```
And the string table in the .remarks/__remarks section containing:
```
inline\0NoDefinition\0printArgsNoRet\0
test-suite/SingleSource/UnitTests/2002-04-17-PrintfChar.c\0printf\0
will not be inlined into \0 because its definition is unavailable\0
```
This is mostly supposed to be used for testing purposes, but it gives us
a 2x reduction in the remark size, and is an incremental change for the
updates to the remarks file format.
Differential Revision: https://reviews.llvm.org/D60227
llvm-svn: 359050
The simple case of:
```
int *callee();
void *caller(void *a) {
if (a == NULL)
return callee();
return a;
}
```
would generate a regular call instead of a tail call because we don't
look through the bitcast of the call to `callee` when duplicating the
return blocks.
Differential Revision: https://reviews.llvm.org/D60837
llvm-svn: 359041
Originally committed in r358931
Reverted in r358997
Seems this change made Apple accelerator tables miss names (because
names started respecting the CU NameTableKind GNU & assuming that
shouldn't produce accelerated names too), which is never correct (apple
accelerator tables don't have separators or CU lists - if present, they
must describe all names in all CUs).
Original Description:
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
llvm-svn: 359026
Same patch as G_FCEIL etc.
Add the missing switch case in widenScalar, add G_INTRINSIC_TRUNC to the correct
rule in AArch64LegalizerInfo.cpp, and add a test.
llvm-svn: 359021
If we only match build vectors, we can miss some patterns
that use shuffles as seen in the affected tests.
Note that the underlying calls within getSplatSourceVector()
have the potential for compile-time explosion because of
exponential recursion looking through binop opcodes, but
currently the list of supported opcodes is very limited.
Both of those problems should be addressed in follow-up
patches.
llvm-svn: 358984
Summary:
The DAGCombiner is rewriting (canonicalizing) an ISD::ADD
with no common bits set in the operands as an ISD::OR node.
This could sometimes result in "missing out" on some
combines that normally are performed for ADD. To be more
specific this could happen if we already have rewritten an
ADD into OR, and later (after legalizations or combines)
we expose patterns that could have been optimized if we
had seen the OR as an ADD (e.g. reassociations based on ADD).
To make the DAG combiner less sensitive to if ADD or OR is
used for these "no common bits set" ADD/OR operations we
now apply most of the ADD combines also to an OR operation,
when value tracking indicates that the operands have no
common bits set.
Reviewers: spatel, RKSimon, craig.topper, kparzysz
Reviewed By: spatel
Subscribers: arsenm, rampitec, lebedev.ri, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59758
llvm-svn: 358965
This reverts r358910 (git commit 2b74466530)
While this patch *seems* trivial and safe and correct, it is not. The
copies are actually load bearing copies. You can observe this with MSan
or other ways of checking for use-after-destroy, but otherwise this may
result in ... difficult to debug inexplicable behavior.
I suspect the issue is that the debug location is used after the
original reference to it is removed. The metadata backing it gets
destroyed as its last references goes away, and then we reference it
later through these const references.
llvm-svn: 358940
Currently to opt in to debug_names in DWARFv5, the IR must contain
'nameTableKind: Default' which also enables debug_pubnames.
Instead, only allow one of {debug_names, apple_names, debug_pubnames,
debug_gnu_pubnames}.
nameTableKind: Default gives debug_names in DWARFv5 and greater,
debug_pubnames in v4 and earlier - and apple_names when tuning for lldb
on MachO.
nameTableKind: GNU always gives gnu_pubnames
llvm-svn: 358931
This was supposed to be NFC, but the change in SDLoc
definitions causes instruction scheduling changes.
There's nothing x86-specific in this code, and it can
likely be used from DAGCombiner's simplifyVBinOp().
llvm-svn: 358930
This patch adds support for BigBitWidth -> SmallBitWidth bitcasts, splitting the DemandedBits/Elts accordingly.
The AMDGPU backend needed an extra (srl (and x, c1 << c2), c2) -> (and (srl(x, c2), c1) combine to encourage BFE creation, I investigated putting this in DAGCombine but it caused a lot of noise on other targets - some improvements, some regressions.
The X86 changes are all definite wins.
Differential Revision: https://reviews.llvm.org/D60462
llvm-svn: 358887
Exactly the same as G_FCEIL, G_FABS, etc.
Add tests for the fp16/nofp16 behaviour, update arm64-vfloatintrinsics, etc.
Differential Revision: https://reviews.llvm.org/D60895
llvm-svn: 358799
Bill Wendling