This phi simplification transform was added with:
D45448
However as shown in PR43802:
https://bugs.llvm.org/show_bug.cgi?id=43802
...we must be careful not to propagate poison when we do the substitution.
There might be some more complicated analysis possible to retain the overflow flag,
but it should always be safe and easy to drop flags (we have similar behavior in
instcombine and other passes).
Differential Revision: https://reviews.llvm.org/D69442
Summary:
If there are a GUID collision between two globals checking the
summarylist from the import index to make assumption can be dangerous.
Do not assume that a GlobalValue that has a GlobalVarSummary
actually is a GlobalVariable as it can be another GlobalValue with
the same GUID that the summary is connected to.
Patch by Joel Klinghed (the_jk@opera.com)
Reviewers: evgeny777, tejohnson
Reviewed By: tejohnson
Subscribers: tejohnson, dblaikie, MaskRay, mehdi_amini, inglorion, hiraditya, steven_wu, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67322
We were already going to all of the trouble of computing maximum constant exit counts for each loop exit, we might as well expose them through the API. The change in IndVars is mostly to demonstrate that the wired up code works, but it als very slightly strengthens the transform. The strengthened case is rather narrow though: it requires one exactly analyzeable exit, one imprecisely analyzeable exit (with the upper bound less than the precise one), and one unanalyzeable exit. I coudn't construct a reasonably stable test case.
This does increase the memory usage of the BackedgeTakenCount by a factor of 2 in the worst case.
I also noticed the loop in IndVars is O(#Exits ^ 2). This doesn't change with this patch. A future patch will cache this result inside of SCEV to avoid requering.
The MVE VADC instruction reads and writes the carry bit at bit 29 of
the FPSCR register. The corresponding ACLE intrinsic is specified to
work with an integer in which the carry bit is stored at bit 0. So if
a user writes a code sequence in C that passes the carry from one VADC
to the next, like this,
s0 = vadcq_u32(a0, b0, &carry);
s1 = vadcq_u32(a1, b1, &carry);
then clang will generate IR for each of those operations that shifts
the carry bit up into bit 29 before the VADC, and after it, shifts it
back down and masks off all but the low bit. But in this situation
what you really wanted was two consecutive VADC instructions, so that
the second one directly reads the value left in FPSCR by the first,
without wasting several instructions on pointlessly clearing the other
flag bits in between.
This commit explains to InstCombine that the other bits of the flags
operand don't matter, and adds a test that demonstrates that all the
code between the two VADC instructions can be optimized away as a
result.
Reviewers: dmgreen, miyuki, ostannard
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67162
This adds an instcombine matcher for code that attempts to perform signed
saturating arithmetic by casting to a higher type. Unsigned cases are already
matched, this adds extra matches for the more complex signed cases, which
involves matching the min(max(add a b)) nodes with proper extends to ensure
legality.
Differential Revision: https://reviews.llvm.org/D68651
llvm-svn: 375505
Summary:
Reduce include dependencies by no longer including Pass.h from
DataLayout.h. That include seemed irrelevant to DataLayout, as
well as being irrelevant to several users of DataLayout.
Reviewers: rnk
Reviewed By: rnk
Subscribers: mehdi_amini, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69261
llvm-svn: 375436
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 375429
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 375427
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 375426
Summary:
When MemCpyOpt is handling aggregate type values, if an instruction (let's call it P) between the targeting load (L) and store (S) clobbers the source pointer of L, it will try to hoist S before P. This process will also hoist S's data dependency instructions.
However, the current implementation has a bug that if one of S's dependency instructions is //also// a user of P, MemCpyOpt will not prevent it from being hoisted above P and cause a use-before-define error. For example, in the newly added test file (i.e. `aggregate-type-crash.ll`), it will try to hoist both `store %my_struct %1, %my_struct* %3` and its dependent, `%3 = bitcast i8* %2 to %my_struct*`, above `%2 = call i8* @my_malloc(%my_struct* %0)`. Creating the following BB:
```
entry:
%1 = bitcast i8* %4 to %my_struct*
%2 = bitcast %my_struct* %1 to i8*
%3 = bitcast %my_struct* %0 to i8*
call void @llvm.memcpy.p0i8.p0i8.i64(i8* align 4 %2, i8* align 4 %3, i64 8, i1 false)
%4 = call i8* @my_malloc(%my_struct* %0)
ret void
```
Where there is a use-before-define error between `%1` and `%4`.
Update: The compiler for the Pony Programming Language [also encounter the same bug](https://github.com/ponylang/ponyc/issues/3140)
Patch by Min-Yih Hsu (myhsu)
Reviewers: eugenis, pcc, dblaikie, dneilson, t.p.northover, lattner
Reviewed By: eugenis
Subscribers: lenary, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66060
llvm-svn: 375403
Summary:
Allow for ignoring the check for a single use in SimplifyDemandedVectorElts
to be able to simplify operands if DemandedElts is known to contain
the union of elements used by all users.
It is a responsibility of a caller of SimplifyDemandedVectorElts to
supply correct DemandedElts.
Simplify a series of extractelement instructions if only a subset of
elements is used.
Reviewers: reames, arsenm, majnemer, nhaehnle
Reviewed By: nhaehnle
Subscribers: wdng, jvesely, nhaehnle, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67345
llvm-svn: 375395
AAReturnedValues, AAMemoryBehavior, and AANoUnwind, can provide
information that helps during the tracking or even justifies no-capture.
We now use this information and enable no-capture in some test cases
designed a long while a ago for these cases.
llvm-svn: 375382
We can end up with two loop exits whose exit counts are equivalent, but whose textual representation is different and non-obvious. For the sub-case where we have a series of exits which dominate one another (common), eliminate any exits which would iterate *after* a previous exit on the exiting iteration.
As noted in the TODO being removed, I'd always thought this was a good idea, but I've now seen this in a real workload as well.
Interestingly, in review, Nikita pointed out there's let another oppurtunity to leverage SCEV's reasoning. If we kept track of the min of dominanting exits so far, we could discharge exits with EC >= MDE. This is less powerful than the existing transform (since later exits aren't considered), but potentially more powerful for any case where SCEV can prove a >= b, but neither a == b or a > b. I don't have an example to illustrate that oppurtunity, but won't be suprised if we find one and return to handle that case as well.
Differential Revision: https://reviews.llvm.org/D69009
llvm-svn: 375379
In this pattern, all the "magic" bits that we'd `add` are all
high sign bits, and in the value we'd be adding to they are all unset,
not unexpectedly, so we can have an `or` there:
https://rise4fun.com/Alive/ups
It is possible that `haveNoCommonBitsSet()` should be taught about this
pattern so that we never have an `add` variant, but the reasoning would
need to be recursive (because of that `select`), so i'm not really sure
that would be worth it just yet.
llvm-svn: 375378
This adds folds for comparing uadd.sat/usub.sat with zero:
* uadd.sat(a, b) == 0 => a == 0 && b == 0 => (a | b) == 0
* usub.sat(a, b) == 0 => a <= b
And inverted forms for !=.
Differential Revision: https://reviews.llvm.org/D69224
llvm-svn: 375374
Summary:
This problem consists of several parts:
* Basic sign bit extraction - `trunc? (?shr %x, (bitwidth(x)-1))`.
This is trivial, and easy to do, we have a fold for it.
* Shift amount reassociation - if we have two identical shifts,
and we can simplify-add their shift amounts together,
then we likely can just perform them as a single shift.
But this is finicky, has one-use restrictions,
and shift opcodes must be identical.
But there is a super-pattern where both of these work together.
to produce sign bit test from two shifts + comparison.
We do indeed already handle this in most cases.
But since we get that fold transitively, it has one-use restrictions.
And what's worse, in this case the right-shifts aren't required to be
identical, and we can't handle that transitively:
If the total shift amount is bitwidth-1, only a sign bit will remain
in the output value. But if we look at this from the perspective of
two shifts, we can't fold - we can't possibly know what bit pattern
we'd produce via two shifts, it will be *some* kind of a mask
produced from original sign bit, but we just can't tell it's shape:
https://rise4fun.com/Alive/cM0https://rise4fun.com/Alive/9IN
But it will *only* contain sign bit and zeros.
So from the perspective of sign bit test, we're good:
https://rise4fun.com/Alive/FRzhttps://rise4fun.com/Alive/qBU
Superb!
So the simplest solution is to extend `reassociateShiftAmtsOfTwoSameDirectionShifts()` to also have a
sudo-analysis mode that will ignore extra-uses, and will only check
whether a) those are two right shifts and b) they end up with bitwidth(x)-1
shift amount and return either the original value that we sign-checking,
or null.
This does not have any functionality change for
the existing `reassociateShiftAmtsOfTwoSameDirectionShifts()`.
All that being said, as disscussed in the review, this yet again
increases usage of instsimplify in instcombine as utility.
Some day that may need to be reevaluated.
https://bugs.llvm.org/show_bug.cgi?id=43595
Reviewers: spatel, efriedma, vsk
Reviewed By: spatel
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68930
llvm-svn: 375371
by ExtBinary format profile
Profile on-demand loading was added for ExtBinary format profile in rL374233,
but currently profile on-demand loading doesn't work well with profile
remapping. The patch adds the support.
Suppose a function in the current module has outline instance in the profile.
The function name in the module is different from the name of the outline
instance, but remapper knows the two names are equal. When loading profile
on-demand, the outline instance has to be loaded with remapper's help.
At the same time SampleProfileReaderItaniumRemapper is changed from a proxy
of SampleProfileReader to a helper member in SampleProfileReader.
Differential Revision: https://reviews.llvm.org/D68901
llvm-svn: 375295
Summary:
CVP, unlike InstCombine, does not run till exaustion.
It only does a single pass.
When dealing with those special binops, if we prove that they can
safely be demoted into their usual binop form,
we do set the no-wrap we deduced. But when dealing with usual binops,
we try to deduce both no-wraps.
So if we convert e.g. @llvm.uadd.with.overflow() to `add nuw`,
we won't attempt to check whether it can be `add nuw nsw`.
This patch proposes to call `processBinOp()` on newly-created binop,
which is identical to what we do for div/rem already.
Reviewers: nikic, spatel, reames
Reviewed By: nikic
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69183
llvm-svn: 375273
Summary:
It looks like this is the only missing statistic in the CVP pass.
Since we prove NSW and NUW separately i'd think we should count them separately too.
Reviewers: nikic, spatel, reames
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68740
llvm-svn: 375230
In the process of writing D69009, I realized we have two distinct sets of invariants within this single function, and basically no shared logic. The optimize loop exit transforms (including the new one in D69009) only care about *analyzeable* exits. Loop predication, on the other hand, has to reason about *all* exits. At the moment, we have the property (due to the requirement for an exact btc) that all exits are analyzeable, but that will likely change in the future as we add widenable condition support.
llvm-svn: 375138
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 375103
We can't normally stumble into that assertion because a tautological
*conditional* `br` in loop body is required, one that always
branches to loop latch. But that should have been always folded
to an unconditional branch before we get it.
But that is not guaranteed if the pass is run standalone.
So let's just promote the assertion into a proper check.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43687
llvm-svn: 375100
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 375094
Summary:
There are two cases where a block is merged into its predecessor and the
MergeBlockIntoPredecessor API is not used. Update the API so it can be
reused in the other cases, in order to avoid code duplication.
Cleanup motivated by D68659.
Reviewers: chandlerc, sanjoy.google, george.burgess.iv
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68670
llvm-svn: 375050
The problem is that we can have two loop exits, 'a' and 'b', where 'a' and 'b' would exit at the same iteration, 'a' precedes 'b' along some path, and 'b' is predicated while 'a' is not. In this case (see the previously submitted test case), we causing the loop to exit through 'b' whereas it should have exited through 'a'.
This only applies to loop exits where the exit counts are not provably inequal, but that isn't as much of a restriction as it appears. If we could order the exit counts, we'd have already removed one of the two exits. In theory, we might be able to prove inequality w/o ordering, but I didn't really explore that piece. Instead, I went for the obvious restriction and ensured we didn't predicate exits following non-predicateable exits.
Credit goes to Evgeny Brevnov for figuring out the problematic case. Fuzzing probably also found it (failures seen), but due to some silly infrastructure problems I hadn't gotten to the results before Evgeny hand reduced it from a benchmark (he manually enabled the transform). Once this is fixed, I'll try to filter through the fuzzer failures to see if there's anything additional lurking.
Differential Revision https://reviews.llvm.org/D68956
llvm-svn: 375038
The 1st attempt at this modified the cost model in a bad way to avoid the vectorization,
but that caused problems for other users (the loop vectorizer) of the cost model.
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a cost-independent bailout with a conservative pattern match for a
multi-instruction sequence that can probably be reduced later.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 375025
Summary:
This is something of a workaround to avoid a crash later on in type
legalizer (WidenVectorResult()).
Also added some f16 tests, including a non-working v3f16 case with
a FIXME.
Reviewers: arsenm, tpr, nhaehnle
Reviewed By: arsenm
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68865
llvm-svn: 374993
Check that a call has an attached MemoryAccess before calling
getClobbering on the instruction.
If no access is attached, the instruction does not access memory.
Resolves PR43441.
llvm-svn: 374920
The 1st attempt at rL374828 inserted the code
at the wrong position (outside of the constant-shift-amount
block). Trying again with an additional test to verify
const-ness.
For a constant shift amount, add the following fold.
shl (zext (i1 X)), ShAmt --> select (X, 1 << ShAmt, 0)
https://rise4fun.com/Alive/IZ9
Fixes PR42257.
Based on original patch by @zvi (Zvi Rackover)
Differential Revision: https://reviews.llvm.org/D63382
llvm-svn: 374886
For a constant shift amount, add the following fold.
shl (zext (i1 X)), ShAmt --> select (X, 1 << ShAmt, 0)
https://rise4fun.com/Alive/IZ9
Fixes PR42257.
Based on original patch by @zvi (Zvi Rackover)
Differential Revision: https://reviews.llvm.org/D63382
llvm-svn: 374828
As reported by Joerg Sonnenberger in IRC, for 32-bit systems,
where pointer and size_t are 32-bit, if you use 64-bit-wide variable
in the loop, you could end up with loop exit count being of the type
wider than the size_t. Now, i'm not sure if we can produce `bcmp`
from that (just truncate?), but we certainly should not assert/miscompile.
llvm-svn: 374811
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
Add an extra parameter so the backend can take the alignment into
consideration.
Differential Revision: https://reviews.llvm.org/D68400
llvm-svn: 374763
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
No-return and will-return are exclusive, assuming the latter is more
prominent we can avoid updates of the former unless will-return is not
known for sure.
llvm-svn: 374739
Even if an argument is captured, we cannot have an effect the function
does not have. This is fine except for the special case of `inalloca` as
it does not behave by the rules.
TODO: Maybe the special rule for `inalloca` is wrong after all.
llvm-svn: 374736
Summary:
This changes "CHECK" check lines to "ATTRIBUTOR" check lines where
necessary and also fixes the now exposed, mostly minor, problems.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68929
llvm-svn: 374735
Follow-up to D68244 to account for a corner case discussed in:
https://bugs.llvm.org/show_bug.cgi?id=43501
Add one more restriction: if the pointer is deref-or-null and in a non-default
(non-zero) address space, we can't assume inbounds.
Differential Revision: https://reviews.llvm.org/D68706
llvm-svn: 374728
Before, we eagerly split blocks even if it was not necessary, e.g., they
had a single unreachable instruction and only a single predecessor.
llvm-svn: 374703
We do not yet perform h2s because we know something is free'ed but we do
it because we know the pointer does not escape. Storing the pointer
allows it to escape so we have to prevent that.
llvm-svn: 374699
H2S did apply to mallocs of non-constant sizes if the uses were OK. This
is now forbidden through reording of the "good" and "bad" cases in the
conditional.
llvm-svn: 374698
The check for naked/optnone was insufficient for different reasons. We
now check before we initialize an abstract attribute and we do it for
all abstract attributes.
llvm-svn: 374694
Summary:
If the underlying alloca did not change, we do not necessarily need new
lifetime markers. This patch adds a check and reuses the old ones if
possible.
Reviewers: reames, ssarda, t.p.northover, hfinkel
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68900
llvm-svn: 374692
Summary:
This is a recommit, this originally landed in rL370454 but was
subsequently reverted in rL370788 due to
https://bugs.llvm.org/show_bug.cgi?id=43206
The reduced testcase was added to bcmp-negative-tests.ll
as @pr43206_different_loops - we must ensure that the SCEV's
we got are both for the same loop we are currently investigating.
Original commit message:
@mclow.lists brought up this issue up in IRC.
It is a reasonably common problem to compare some two values for equality.
Those may be just some integers, strings or arrays of integers.
In C, there is `memcmp()`, `bcmp()` functions.
In C++, there exists `std::equal()` algorithm.
One can also write that function manually.
libstdc++'s `std::equal()` is specialized to directly call `memcmp()` for
various types, but not `std::byte` from C++2a. https://godbolt.org/z/mx2ejJ
libc++ does not do anything like that, it simply relies on simple C++'s
`operator==()`. https://godbolt.org/z/er0Zwf (GOOD!)
So likely, there exists a certain performance opportunities.
Let's compare performance of naive `std::equal()` (no `memcmp()`) with one that
is using `memcmp()` (in this case, compiled with modified compiler). {F8768213}
```
#include <algorithm>
#include <cmath>
#include <cstdint>
#include <iterator>
#include <limits>
#include <random>
#include <type_traits>
#include <utility>
#include <vector>
#include "benchmark/benchmark.h"
template <class T>
bool equal(T* a, T* a_end, T* b) noexcept {
for (; a != a_end; ++a, ++b) {
if (*a != *b) return false;
}
return true;
}
template <typename T>
std::vector<T> getVectorOfRandomNumbers(size_t count) {
std::random_device rd;
std::mt19937 gen(rd());
std::uniform_int_distribution<T> dis(std::numeric_limits<T>::min(),
std::numeric_limits<T>::max());
std::vector<T> v;
v.reserve(count);
std::generate_n(std::back_inserter(v), count,
[&dis, &gen]() { return dis(gen); });
assert(v.size() == count);
return v;
}
struct Identical {
template <typename T>
static std::pair<std::vector<T>, std::vector<T>> Gen(size_t count) {
auto Tmp = getVectorOfRandomNumbers<T>(count);
return std::make_pair(Tmp, std::move(Tmp));
}
};
struct InequalHalfway {
template <typename T>
static std::pair<std::vector<T>, std::vector<T>> Gen(size_t count) {
auto V0 = getVectorOfRandomNumbers<T>(count);
auto V1 = V0;
V1[V1.size() / size_t(2)]++; // just change the value.
return std::make_pair(std::move(V0), std::move(V1));
}
};
template <class T, class Gen>
void BM_bcmp(benchmark::State& state) {
const size_t Length = state.range(0);
const std::pair<std::vector<T>, std::vector<T>> Data =
Gen::template Gen<T>(Length);
const std::vector<T>& a = Data.first;
const std::vector<T>& b = Data.second;
assert(a.size() == Length && b.size() == a.size());
benchmark::ClobberMemory();
benchmark::DoNotOptimize(a);
benchmark::DoNotOptimize(a.data());
benchmark::DoNotOptimize(b);
benchmark::DoNotOptimize(b.data());
for (auto _ : state) {
const bool is_equal = equal(a.data(), a.data() + a.size(), b.data());
benchmark::DoNotOptimize(is_equal);
}
state.SetComplexityN(Length);
state.counters["eltcnt"] =
benchmark::Counter(Length, benchmark::Counter::kIsIterationInvariant);
state.counters["eltcnt/sec"] =
benchmark::Counter(Length, benchmark::Counter::kIsIterationInvariantRate);
const size_t BytesRead = 2 * sizeof(T) * Length;
state.counters["bytes_read/iteration"] =
benchmark::Counter(BytesRead, benchmark::Counter::kDefaults,
benchmark::Counter::OneK::kIs1024);
state.counters["bytes_read/sec"] = benchmark::Counter(
BytesRead, benchmark::Counter::kIsIterationInvariantRate,
benchmark::Counter::OneK::kIs1024);
}
template <typename T>
static void CustomArguments(benchmark::internal::Benchmark* b) {
const size_t L2SizeBytes = []() {
for (const benchmark::CPUInfo::CacheInfo& I :
benchmark::CPUInfo::Get().caches) {
if (I.level == 2) return I.size;
}
return 0;
}();
// What is the largest range we can check to always fit within given L2 cache?
const size_t MaxLen = L2SizeBytes / /*total bufs*/ 2 /
/*maximal elt size*/ sizeof(T) / /*safety margin*/ 2;
b->RangeMultiplier(2)->Range(1, MaxLen)->Complexity(benchmark::oN);
}
BENCHMARK_TEMPLATE(BM_bcmp, uint8_t, Identical)
->Apply(CustomArguments<uint8_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint16_t, Identical)
->Apply(CustomArguments<uint16_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint32_t, Identical)
->Apply(CustomArguments<uint32_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint64_t, Identical)
->Apply(CustomArguments<uint64_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint8_t, InequalHalfway)
->Apply(CustomArguments<uint8_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint16_t, InequalHalfway)
->Apply(CustomArguments<uint16_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint32_t, InequalHalfway)
->Apply(CustomArguments<uint32_t>);
BENCHMARK_TEMPLATE(BM_bcmp, uint64_t, InequalHalfway)
->Apply(CustomArguments<uint64_t>);
```
{F8768210}
```
$ ~/src/googlebenchmark/tools/compare.py --no-utest benchmarks build-{old,new}/test/llvm-bcmp-bench
RUNNING: build-old/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpb6PEUx
2019-04-25 21:17:11
Running build-old/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 0.65, 3.90, 4.14
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 432131 ns 432101 ns 1613 bytes_read/iteration=1000k bytes_read/sec=2.20706G/s eltcnt=825.856M eltcnt/sec=1.18491G/s
BM_bcmp<uint8_t, Identical>_BigO 0.86 N 0.86 N
BM_bcmp<uint8_t, Identical>_RMS 8 % 8 %
<...>
BM_bcmp<uint16_t, Identical>/256000 161408 ns 161409 ns 4027 bytes_read/iteration=1000k bytes_read/sec=5.90843G/s eltcnt=1030.91M eltcnt/sec=1.58603G/s
BM_bcmp<uint16_t, Identical>_BigO 0.67 N 0.67 N
BM_bcmp<uint16_t, Identical>_RMS 25 % 25 %
<...>
BM_bcmp<uint32_t, Identical>/128000 81497 ns 81488 ns 8415 bytes_read/iteration=1000k bytes_read/sec=11.7032G/s eltcnt=1077.12M eltcnt/sec=1.57078G/s
BM_bcmp<uint32_t, Identical>_BigO 0.71 N 0.71 N
BM_bcmp<uint32_t, Identical>_RMS 42 % 42 %
<...>
BM_bcmp<uint64_t, Identical>/64000 50138 ns 50138 ns 10909 bytes_read/iteration=1000k bytes_read/sec=19.0209G/s eltcnt=698.176M eltcnt/sec=1.27647G/s
BM_bcmp<uint64_t, Identical>_BigO 0.84 N 0.84 N
BM_bcmp<uint64_t, Identical>_RMS 27 % 27 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 192405 ns 192392 ns 3638 bytes_read/iteration=1000k bytes_read/sec=4.95694G/s eltcnt=1.86266G eltcnt/sec=2.66124G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.38 N 0.38 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 3 % 3 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 127858 ns 127860 ns 5477 bytes_read/iteration=1000k bytes_read/sec=7.45873G/s eltcnt=1.40211G eltcnt/sec=2.00219G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 0 % 0 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 49140 ns 49140 ns 14281 bytes_read/iteration=1000k bytes_read/sec=19.4072G/s eltcnt=1.82797G eltcnt/sec=2.60478G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.40 N 0.40 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 18 % 18 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 32101 ns 32099 ns 21786 bytes_read/iteration=1000k bytes_read/sec=29.7101G/s eltcnt=1.3943G eltcnt/sec=1.99381G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.50 N 0.50 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 1 % 1 %
RUNNING: build-new/test/llvm-bcmp-bench --benchmark_out=/tmp/tmpQ46PP0
2019-04-25 21:19:29
Running build-new/test/llvm-bcmp-bench
Run on (8 X 4000 MHz CPU s)
CPU Caches:
L1 Data 16K (x8)
L1 Instruction 64K (x4)
L2 Unified 2048K (x4)
L3 Unified 8192K (x1)
Load Average: 1.01, 2.85, 3.71
---------------------------------------------------------------------------------------------------
Benchmark Time CPU Iterations UserCounters...
---------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 18593 ns 18590 ns 37565 bytes_read/iteration=1000k bytes_read/sec=51.2991G/s eltcnt=19.2333G eltcnt/sec=27.541G/s
BM_bcmp<uint8_t, Identical>_BigO 0.04 N 0.04 N
BM_bcmp<uint8_t, Identical>_RMS 37 % 37 %
<...>
BM_bcmp<uint16_t, Identical>/256000 18950 ns 18948 ns 37223 bytes_read/iteration=1000k bytes_read/sec=50.3324G/s eltcnt=9.52909G eltcnt/sec=13.511G/s
BM_bcmp<uint16_t, Identical>_BigO 0.08 N 0.08 N
BM_bcmp<uint16_t, Identical>_RMS 34 % 34 %
<...>
BM_bcmp<uint32_t, Identical>/128000 18627 ns 18627 ns 37895 bytes_read/iteration=1000k bytes_read/sec=51.198G/s eltcnt=4.85056G eltcnt/sec=6.87168G/s
BM_bcmp<uint32_t, Identical>_BigO 0.16 N 0.16 N
BM_bcmp<uint32_t, Identical>_RMS 35 % 35 %
<...>
BM_bcmp<uint64_t, Identical>/64000 18855 ns 18855 ns 37458 bytes_read/iteration=1000k bytes_read/sec=50.5791G/s eltcnt=2.39731G eltcnt/sec=3.3943G/s
BM_bcmp<uint64_t, Identical>_BigO 0.32 N 0.32 N
BM_bcmp<uint64_t, Identical>_RMS 33 % 33 %
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 9570 ns 9569 ns 73500 bytes_read/iteration=1000k bytes_read/sec=99.6601G/s eltcnt=37.632G eltcnt/sec=53.5046G/s
BM_bcmp<uint8_t, InequalHalfway>_BigO 0.02 N 0.02 N
BM_bcmp<uint8_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 9547 ns 9547 ns 74343 bytes_read/iteration=1000k bytes_read/sec=99.8971G/s eltcnt=19.0318G eltcnt/sec=26.8159G/s
BM_bcmp<uint16_t, InequalHalfway>_BigO 0.04 N 0.04 N
BM_bcmp<uint16_t, InequalHalfway>_RMS 29 % 29 %
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 9396 ns 9394 ns 73521 bytes_read/iteration=1000k bytes_read/sec=101.518G/s eltcnt=9.41069G eltcnt/sec=13.6255G/s
BM_bcmp<uint32_t, InequalHalfway>_BigO 0.08 N 0.08 N
BM_bcmp<uint32_t, InequalHalfway>_RMS 30 % 30 %
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 9499 ns 9498 ns 73802 bytes_read/iteration=1000k bytes_read/sec=100.405G/s eltcnt=4.72333G eltcnt/sec=6.73808G/s
BM_bcmp<uint64_t, InequalHalfway>_BigO 0.16 N 0.16 N
BM_bcmp<uint64_t, InequalHalfway>_RMS 28 % 28 %
Comparing build-old/test/llvm-bcmp-bench to build-new/test/llvm-bcmp-bench
Benchmark Time CPU Time Old Time New CPU Old CPU New
---------------------------------------------------------------------------------------------------------------------------------------
<...>
BM_bcmp<uint8_t, Identical>/512000 -0.9570 -0.9570 432131 18593 432101 18590
<...>
BM_bcmp<uint16_t, Identical>/256000 -0.8826 -0.8826 161408 18950 161409 18948
<...>
BM_bcmp<uint32_t, Identical>/128000 -0.7714 -0.7714 81497 18627 81488 18627
<...>
BM_bcmp<uint64_t, Identical>/64000 -0.6239 -0.6239 50138 18855 50138 18855
<...>
BM_bcmp<uint8_t, InequalHalfway>/512000 -0.9503 -0.9503 192405 9570 192392 9569
<...>
BM_bcmp<uint16_t, InequalHalfway>/256000 -0.9253 -0.9253 127858 9547 127860 9547
<...>
BM_bcmp<uint32_t, InequalHalfway>/128000 -0.8088 -0.8088 49140 9396 49140 9394
<...>
BM_bcmp<uint64_t, InequalHalfway>/64000 -0.7041 -0.7041 32101 9499 32099 9498
```
What can we tell from the benchmark?
* Performance of naive equality check somewhat improves with element size,
maxing out at eltcnt/sec=1.58603G/s for uint16_t, or bytes_read/sec=19.0209G/s
for uint64_t. I think, that instability implies performance problems.
* Performance of `memcmp()`-aware benchmark always maxes out at around
bytes_read/sec=51.2991G/s for every type. That is 2.6x the throughput of the
naive variant!
* eltcnt/sec metric for the `memcmp()`-aware benchmark maxes out at
eltcnt/sec=27.541G/s for uint8_t (was: eltcnt/sec=1.18491G/s, so 24x) and
linearly decreases with element size.
For uint64_t, it's ~4x+ the elements/second.
* The call obvious is more pricey than the loop, with small element count.
As it can be seen from the full output {F8768210}, the `memcmp()` is almost
universally worse, independent of the element size (and thus buffer size) when
element count is less than 8.
So all in all, bcmp idiom does indeed pose untapped performance headroom.
This diff does implement said idiom recognition. I think a reasonable test
coverage is present, but do tell if there is anything obvious missing.
Now, quality. This does succeed to build and pass the test-suite, at least
without any non-bundled elements. {F8768216} {F8768217}
This transform fires 91 times:
```
$ /build/test-suite/utils/compare.py -m loop-idiom.NumBCmp result-new.json
Tests: 1149
Metric: loop-idiom.NumBCmp
Program result-new
MultiSourc...Benchmarks/7zip/7zip-benchmark 79.00
MultiSource/Applications/d/make_dparser 3.00
SingleSource/UnitTests/vla 2.00
MultiSource/Applications/Burg/burg 1.00
MultiSourc.../Applications/JM/lencod/lencod 1.00
MultiSource/Applications/lemon/lemon 1.00
MultiSource/Benchmarks/Bullet/bullet 1.00
MultiSourc...e/Benchmarks/MallocBench/gs/gs 1.00
MultiSourc...gs-C/TimberWolfMC/timberwolfmc 1.00
MultiSourc...Prolangs-C/simulator/simulator 1.00
```
The size changes are:
I'm not sure what's going on with SingleSource/UnitTests/vla.test yet, did not look.
```
$ /build/test-suite/utils/compare.py -m size..text result-{old,new}.json --filter-hash
Tests: 1149
Same hash: 907 (filtered out)
Remaining: 242
Metric: size..text
Program result-old result-new diff
test-suite...ingleSource/UnitTests/vla.test 753.00 833.00 10.6%
test-suite...marks/7zip/7zip-benchmark.test 1001697.00 966657.00 -3.5%
test-suite...ngs-C/simulator/simulator.test 32369.00 32321.00 -0.1%
test-suite...plications/d/make_dparser.test 89585.00 89505.00 -0.1%
test-suite...ce/Applications/Burg/burg.test 40817.00 40785.00 -0.1%
test-suite.../Applications/lemon/lemon.test 47281.00 47249.00 -0.1%
test-suite...TimberWolfMC/timberwolfmc.test 250065.00 250113.00 0.0%
test-suite...chmarks/MallocBench/gs/gs.test 149889.00 149873.00 -0.0%
test-suite...ications/JM/lencod/lencod.test 769585.00 769569.00 -0.0%
test-suite.../Benchmarks/Bullet/bullet.test 770049.00 770049.00 0.0%
test-suite...HMARK_ANISTROPIC_DIFFUSION/128 NaN NaN nan%
test-suite...HMARK_ANISTROPIC_DIFFUSION/256 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/64 NaN NaN nan%
test-suite...CHMARK_ANISTROPIC_DIFFUSION/32 NaN NaN nan%
test-suite...ENCHMARK_BILATERAL_FILTER/64/4 NaN NaN nan%
Geomean difference nan%
result-old result-new diff
count 1.000000e+01 10.00000 10.000000
mean 3.152090e+05 311695.40000 0.006749
std 3.790398e+05 372091.42232 0.036605
min 7.530000e+02 833.00000 -0.034981
25% 4.243300e+04 42401.00000 -0.000866
50% 1.197370e+05 119689.00000 -0.000392
75% 6.397050e+05 639705.00000 -0.000005
max 1.001697e+06 966657.00000 0.106242
```
I don't have timings though.
And now to the code. The basic idea is to completely replace the whole loop.
If we can't fully kill it, don't transform.
I have left one or two comments in the code, so hopefully it can be understood.
Also, there is a few TODO's that i have left for follow-ups:
* widening of `memcmp()`/`bcmp()`
* step smaller than the comparison size
* Metadata propagation
* more than two blocks as long as there is still a single backedge?
* ???
Reviewers: reames, fhahn, mkazantsev, chandlerc, craig.topper, courbet
Reviewed By: courbet
Subscribers: miyuki, hiraditya, xbolva00, nikic, jfb, gchatelet, courbet, llvm-commits, mclow.lists
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61144
llvm-svn: 374662
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374634
This patch adds a moveAfter method to VPRecipeBase, which can be used to
move elements after other elements, across VPBasicBlocks, if necessary.
Reviewers: dcaballe, hsaito, rengolin, hfinkel
Reviewed By: dcaballe
Differential Revision: https://reviews.llvm.org/D46825
llvm-svn: 374565
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 374539
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
> llvm-svn: 374481
Signed-off-by: Vitaly Buka <vitalybuka@google.com>
llvm-svn: 374527
This is really a known bits style transformation, but known bits isn't context sensitive. The particular case which comes up happens to involve a range which allows range based reasoning to eliminate the mask pattern, so handle that case specifically in CVP.
InstCombine likes to generate the mask-by-low-bits pattern when widening an arithmetic expression which includes a zext in the middle.
Differential Revision: https://reviews.llvm.org/D68811
llvm-svn: 374506
Summary:
If we insert them from function pass some analysis may be missing or invalid.
Fixes PR42877.
Reviewers: eugenis, leonardchan
Reviewed By: leonardchan
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D68832
llvm-svn: 374481
This is just small refactoring to minimize changes in upcoming patch.
In the next path I'm going to introduce changes into heuristic for vectorization of "tiny trip count" loops.
Patch by Evgeniy Brevnov <evgueni.brevnov@gmail.com>
Reviewers: hsaito, Ayal, fhahn, reames
Reviewed By: hsaito
Differential Revision: https://reviews.llvm.org/D67690
llvm-svn: 374338
Summary:
`null` in the default address space (=AS 0) cannot be captured nor can
it alias anything. We make this clear now as it can be important for
callbacks and other cases later on. In addition, this patch improves the
debug output for noalias deduction.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68624
llvm-svn: 374280
in ExtBinary format
Currently for Text, Binary and ExtBinary format profiles, when we compile a
module with samplefdo, even if there is no function showing up in the profile,
we have to load all the function profiles from the profile input. That is a
waste of compile time.
CompactBinary format profile has already had the support of loading function
profiles on demand. In this patch, we add the support to load profile on
demand for ExtBinary format. It will work no matter the sections in ExtBinary
format profile are compressed or not. Experiment shows it reduces the time to
compile a server benchmark by 30%.
When profile remapping and loading function profiles on demand are both used,
extra work needs to be done so that the loading on demand process will take
the name remapping into consideration. It will be addressed in a follow-up
patch.
Differential Revision: https://reviews.llvm.org/D68601
llvm-svn: 374233
Add own version of the mathematical constants from the upcoming C++20 `std::numbers`.
Differential revision: https://reviews.llvm.org/D68257
llvm-svn: 374207
We failed to account for the target register width (max vector factor)
when vectorizing starting from GEPs. This causes vectorization to
proceed to obviously illegal widths as in:
https://bugs.llvm.org/show_bug.cgi?id=43578
For x86, this also means that SLP can produce rogue AVX or AVX512
code even when the user specifies a narrower vector width.
The AArch64 test in ext-trunc.ll appears to be better using the
narrower width. I'm not exactly sure what getelementptr.ll is trying
to do, but it's testing with "-slp-threshold=-18", so I'm not worried
about those diffs. The x86 test is an over-reduction from SPEC h264;
this patch appears to restore the perf loss caused by SLP when using
-march=haswell.
Differential Revision: https://reviews.llvm.org/D68667
llvm-svn: 374183
Summary:
The rule for the moveAllAfterMergeBlocks API si for all instructions
from `From` to have been moved to `To`, while keeping the CFG edges (and
block terminators) unchanged.
Update all the callsites for moveAllAfterMergeBlocks to follow this.
Pending follow-up: since the same behavior is needed everytime, merge
all callsites into one. The common denominator may be the call to
`MergeBlockIntoPredecessor`.
Resolves PR43569.
Reviewers: george.burgess.iv
Subscribers: Prazek, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68659
llvm-svn: 374177
When optimising for size and SCEV runtime checks need to be emitted to check
overflow behaviour, the loop vectorizer can run in this assert:
LoopVectorize.cpp:2699: void llvm::InnerLoopVectorizer::emitSCEVChecks(
llvm::Loop *, llvm::BasicBlock *): Assertion `!BB->getParent()->hasOptSize()
&& "Cannot SCEV check stride or overflow when opt
We should not generate predicates while optimising for size because
code will be generated for predicates such as these SCEV overflow runtime
checks.
This should fix PR43371.
Differential Revision: https://reviews.llvm.org/D68082
llvm-svn: 374166
David added the JamCRC implementation in r246590. More recently, Eugene
added a CRC-32 implementation in r357901, which falls back to zlib's
crc32 function if present.
These checksums are essentially the same, so having multiple
implementations seems unnecessary. This replaces the CRC-32
implementation with the simpler one from JamCRC, and implements the
JamCRC interface in terms of CRC-32 since this means it can use zlib's
implementation when available, saving a few bytes and potentially making
it faster.
JamCRC took an ArrayRef<char> argument, and CRC-32 took a StringRef.
This patch changes it to ArrayRef<uint8_t> which I think is the best
choice, and simplifies a few of the callers nicely.
Differential revision: https://reviews.llvm.org/D68570
llvm-svn: 374148
Also Revert "[LoopVectorize] Fix non-debug builds after rL374017"
This reverts commit 9f41deccc0.
This reverts commit 18b6fe07bc.
The patch is breaking PowerPC internal build, checked with author, reverting
on behalf of him for now due to timezone.
llvm-svn: 374091
Factor out CodeExtractor's analysis of allocas (for shrinkwrapping
purposes), and allow the analysis to be reused.
This resolves a quadratic compile-time bug observed when compiling
AMDGPUDisassembler.cpp.o.
Pre-patch (Release + LTO clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
176.5278 ( 57.8%) 0.4915 ( 18.5%) 177.0192 ( 57.4%) 177.4112 ( 57.3%) Hot Cold Splitting
```
Post-patch (ReleaseAsserts clang):
```
---User Time--- --System Time-- --User+System-- ---Wall Time--- --- Name ---
1.4051 ( 3.3%) 0.0079 ( 0.3%) 1.4129 ( 3.2%) 1.4129 ( 3.2%) Hot Cold Splitting
```
Testing: check-llvm, and comparing the AMDGPUDisassembler.cpp.o binary
pre- vs. post-patch.
An alternate approach is to hide CodeExtractorAnalysisCache from clients
of CodeExtractor, and to recompute the analysis from scratch inside of
CodeExtractor::extractCodeRegion(). This eliminates some redundant work
in the shrinkwrapping legality check. However, some clients continue to
exhibit O(n^2) compile time behavior as computing the analysis is O(n).
rdar://55912966
Differential Revision: https://reviews.llvm.org/D68616
llvm-svn: 374089
Summary:
In D65186 and related patches, MustBeExecutedContextExplorer is introduced. This enables us to traverse instructions guaranteed to execute from function entry. If we can know the argument is used as `dereferenceable` or `nonnull` in these instructions, we can mark `dereferenceable` or `nonnull` in the argument definition:
1. Memory instruction (similar to D64258)
Trace memory instruction pointer operand. Currently, only inbounds GEPs are traced.
```
define i64* @f(i64* %a) {
entry:
%add.ptr = getelementptr inbounds i64, i64* %a, i64 1
; (because of inbounds GEP we can know that %a is at least dereferenceable(16))
store i64 1, i64* %add.ptr, align 8
ret i64* %add.ptr ; dereferenceable 8 (because above instruction stores into it)
}
```
2. Propagation from callsite (similar to D27855)
If `deref` or `nonnull` are known in call site parameter attributes we can also say that argument also that attribute.
```
declare void @use3(i8* %x, i8* %y, i8* %z);
declare void @use3nonnull(i8* nonnull %x, i8* nonnull %y, i8* nonnull %z);
define void @parent1(i8* %a, i8* %b, i8* %c) {
call void @use3nonnull(i8* %b, i8* %c, i8* %a)
; Above instruction is always executed so we can say that@parent1(i8* nonnnull %a, i8* nonnull %b, i8* nonnull %c)
call void @use3(i8* %c, i8* %a, i8* %b)
ret void
}
```
Reviewers: jdoerfert, sstefan1, spatel, reames
Reviewed By: jdoerfert
Subscribers: xbolva00, hiraditya, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65402
llvm-svn: 374063
Summary: This patch introduces a generic way to compose two structured deductions. This will be used for composing generic deduction with `MustBeExecutedExplorer` and other existing generic deduction.
Reviewers: jdoerfert, sstefan1
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66645
llvm-svn: 374060
* Adds a TypeSize struct to represent the known minimum size of a type
along with a flag to indicate that the runtime size is a integer multiple
of that size
* Converts existing size query functions from Type.h and DataLayout.h to
return a TypeSize result
* Adds convenience methods (including a transparent conversion operator
to uint64_t) so that most existing code 'just works' as if the return
values were still scalars.
* Uses the new size queries along with ElementCount to ensure that all
supported instructions used with scalable vectors can be constructed
in IR.
Reviewers: hfinkel, lattner, rkruppe, greened, rovka, rengolin, sdesmalen
Reviewed By: rovka, sdesmalen
Differential Revision: https://reviews.llvm.org/D53137
llvm-svn: 374042
Summary: LoopRotate is a loop pass and SE should always be available.
Reviewers: anemet, asbirlea
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D68573
llvm-svn: 374026
In loop-vectorize, interleave count and vector factor depend on target register number. Currently, it does not
estimate different register pressure for different register class separately(especially for scalar type,
float type should not be on the same position with int type), so it's not accurate. Specifically,
it causes too many times interleaving/unrolling, result in too many register spills in loop body and hurting performance.
So we need classify the register classes in IR level, and importantly these are abstract register classes,
and are not the target register class of backend provided in td file. It's used to establish the mapping between
the types of IR values and the number of simultaneous live ranges to which we'd like to limit for some set of those types.
For example, POWER target, register num is special when VSX is enabled. When VSX is enabled, the number of int scalar register is 32(GPR),
float is 64(VSR), but for int and float vector register both are 64(VSR). So there should be 2 kinds of register class when vsx is enabled,
and 3 kinds of register class when VSX is NOT enabled.
It runs on POWER target, it makes big(+~30%) performance improvement in one specific bmk(503.bwaves_r) of spec2017 and no other obvious degressions.
Differential revision: https://reviews.llvm.org/D67148
llvm-svn: 374017
The initialization logic has become part of the Attributor but the
patches that introduced these calls here were in development when the
transition happened.
We also now clean up (undefine) the macros used to create attributes.
llvm-svn: 373987
Local linkage is internal or private, and private is a specialization of
internal, so either is fine for all our "local linkage" queries.
llvm-svn: 373986
Summary:
When we iterate over uses of functions and expect them to be call sites,
we now use abstract call sites to allow callback calls.
Reviewers: sstefan1, uenoku
Subscribers: hiraditya, bollu, hfinkel, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67871
llvm-svn: 373985
This can come up in Bit Stream abstractions.
The pattern looks big/scary, but it can't be simplified any further.
It only is so simple because a number of my preparatory folds had
happened already (shift amount reassociation / shift amount
reassociation in bit test, sign bit test detection).
Highlights:
* There are two main flavors: https://rise4fun.com/Alive/zWi
The difference is add vs. sub, and left-shift of -1 vs. 1
* Since we only change the shift opcode,
we can preserve the exact-ness: https://rise4fun.com/Alive/4u4
* There can be truncation after high-bit-extraction:
https://rise4fun.com/Alive/slHc1 (the main pattern i'm after!)
Which means that we need to ignore zext of shift amounts and of NBits.
* The sign-extending magic can be extended itself (in add pattern
via sext, in sub pattern via zext. not the other way around!)
https://rise4fun.com/Alive/NhG
(or those sext/zext can be sinked into `select`!)
Which again means we should pay attention when matching NBits.
* We can have both truncation of extraction and widening of magic:
https://rise4fun.com/Alive/XTw
In other words, i don't believe we need to have any checks on
bitwidths of any of these constructs.
This is worsened in general by the fact that we may have `sext` instead
of `zext` for shift amounts, and we don't yet canonicalize to `zext`,
although we should. I have not done anything about that here.
Also, we really should have something to weed out `sub` like these,
by folding them into `add` variant.
https://bugs.llvm.org/show_bug.cgi?id=42389
llvm-svn: 373964
True, no test coverage is being added here. But those non-canonical
predicates that are already handled here already have no test coverage
as far as i can tell. I tried to add tests for them, but all the patterns
already get handled elsewhere.
llvm-svn: 373962
Summary:
Currently, we pre-check whether we need to produce a mask or not.
This involves some rather magical constants.
I'd like to extend this fold to also handle the situation
when there's also a `trunc` before outer shift.
That will require another set of magical constants.
It's ugly.
Instead, we can just compute the mask, and check
whether mask is a pass-through (all-ones) or not.
This way we don't need to have any magical numbers.
This change is NFC other than the fact that we now compute
the mask and then check if we need (and can!) apply it.
Reviewers: spatel
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68470
llvm-svn: 373961
Summary:
When we do `ConstantExpr::getZExt()`, that "extends" `undef` to `0`,
which means that for patterns a/b we'd assume that we must not produce
any bits for that channel, while in reality we simply didn't care
about that channel - i.e. we don't need to mask it.
Reviewers: spatel
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68239
llvm-svn: 373960
Doing this makes MSVC complain that `empty(someRange)` could refer to
either C++17's std::empty or LLVM's llvm::empty, which previously we
avoided via SFINAE because std::empty is defined in terms of an empty
member rather than begin and end. So, switch callers over to the new
method as it is added.
https://reviews.llvm.org/D68439
llvm-svn: 373935
This reverts SVN r373833, as it caused a failed assert "Non-zero loop
cost expected" on building numerous projects, see PR43582 for details
and reproduction samples.
llvm-svn: 373882
I don't see an ideal solution to these 2 related, potentially large, perf regressions:
https://bugs.llvm.org/show_bug.cgi?id=42708https://bugs.llvm.org/show_bug.cgi?id=43146
We decided that load combining was unsuitable for IR because it could obscure other
optimizations in IR. So we removed the LoadCombiner pass and deferred to the backend.
Therefore, preventing SLP from destroying load combine opportunities requires that it
recognizes patterns that could be combined later, but not do the optimization itself (
it's not a vector combine anyway, so it's probably out-of-scope for SLP).
Here, we add a scalar cost model adjustment with a conservative pattern match and cost
summation for a multi-instruction sequence that can probably be reduced later.
This should prevent SLP from creating a vector reduction unless that sequence is
extremely cheap.
In the x86 tests shown (and discussed in more detail in the bug reports), SDAG combining
will produce a single instruction on these tests like:
movbe rax, qword ptr [rdi]
or:
mov rax, qword ptr [rdi]
Not some (half) vector monstrosity as we currently do using SLP:
vpmovzxbq ymm0, dword ptr [rdi + 1] # ymm0 = mem[0],zero,zero,..
vpsllvq ymm0, ymm0, ymmword ptr [rip + .LCPI0_0]
movzx eax, byte ptr [rdi]
movzx ecx, byte ptr [rdi + 5]
shl rcx, 40
movzx edx, byte ptr [rdi + 6]
shl rdx, 48
or rdx, rcx
movzx ecx, byte ptr [rdi + 7]
shl rcx, 56
or rcx, rdx
or rcx, rax
vextracti128 xmm1, ymm0, 1
vpor xmm0, xmm0, xmm1
vpshufd xmm1, xmm0, 78 # xmm1 = xmm0[2,3,0,1]
vpor xmm0, xmm0, xmm1
vmovq rax, xmm0
or rax, rcx
vzeroupper
ret
Differential Revision: https://reviews.llvm.org/D67841
llvm-svn: 373833
We do indeed already get it right in some cases, but only transitively,
with one-use restrictions. Since we only need to produce a single
comparison, it makes sense to match the pattern directly:
https://rise4fun.com/Alive/kPg
llvm-svn: 373802
Initially (D65380) i believed that if we have rightshift-trunc-rightshift,
we can't do any folding. But as it usually happens, i was wrong.
https://rise4fun.com/Alive/GEwhttps://rise4fun.com/Alive/gN2O
In https://bugs.llvm.org/show_bug.cgi?id=43564 we happen to have
this very sequence, of two right shifts separated by trunc.
And "just" so that happens, we apparently can fold the pattern
if the total shift amount is either 0, or it's equal to the bitwidth
of the innermost widest shift - i.e. if we are left with only the
original sign bit. Which is exactly what is wanted there.
llvm-svn: 373801
Without this we can encounter link errors or incorrect behaviour
at runtime as a result of the wrong function being referenced.
Differential Revision: https://reviews.llvm.org/D67945
llvm-svn: 373678
Summary: This PR creates a utility class called ValueProfileCollector that tells PGOInstrumentationGen and PGOInstrumentationUse what to value-profile and where to attach the profile metadata. It then refactors logic scattered in PGOInstrumentation.cpp into two plugins that plug into the ValueProfileCollector.
Authored By: Wael Yehia <wyehia@ca.ibm.com>
Reviewer: davidxl, tejohnson, xur
Reviewed By: davidxl, tejohnson, xur
Subscribers: llvm-commits
Tag: #llvm
Differential Revision: https://reviews.llvm.org/D67920
Patch By Wael Yehia <wyehia@ca.ibm.com>
llvm-svn: 373601
https://rise4fun.com/Alive/8BY - valid for lshr+trunc+variable sext
https://rise4fun.com/Alive/7jk - the variable sext can be redundant
https://rise4fun.com/Alive/Qslu - 'exact'-ness of first shift can be preserver
https://rise4fun.com/Alive/IF63 - without trunc we could view this as
more general "drop redundant mask before right-shift",
but let's handle it here for now
https://rise4fun.com/Alive/iip - likewise, without trunc, variable sext can be redundant.
There's more patterns for sure - e.g. we can have 'lshr' as the final shift,
but that might be best handled by some more generic transform, e.g.
"drop redundant masking before right-shift" (PR42456)
I'm singling-out this sext patch because you can only extract
high bits with `*shr` (unlike abstract bit masking),
and i *know* this fold is wanted by existing code.
I don't believe there is much to review here,
so i'm gonna opt into post-review mode here.
https://bugs.llvm.org/show_bug.cgi?id=43523
llvm-svn: 373542
bcopy is still widely used mainly for network apps. Sadly, LLVM has no optimizations for bcopy, but there are some for memmove.
Since bcopy == memmove, it is profitable to transform bcopy to memmove and use current optimizations for memmove for free here.
llvm-svn: 373537
Terminators like invoke can have users outside the current basic block.
We have to replace those users with undef, before replacing the
terminator.
This fixes a crash exposed by rL373430.
Reviewers: brzycki, asbirlea, davide, spatel
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D68327
llvm-svn: 373513
There are no users that pass in LazyValueInfo, so we can simplify the
function a bit.
Reviewers: brzycki, asbirlea, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D68297
llvm-svn: 373488
Summary:
This fixes a hole in the handling of devirtualized targets that were
local but need promoting due to devirtualization in another module. We
were not correctly referencing the promoted symbol in some cases. Make
sure the code that updates the name also looks at the ExportedGUIDs set
by utilizing a callback that checks all conditions (the callback
utilized by the internalization/promotion code).
Reviewers: pcc, davidxl, hiraditya
Subscribers: mehdi_amini, Prazek, inglorion, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68159
llvm-svn: 373485
The static analyzer is warning about a potential null dereference, but we should be able to use cast<PHINode> directly and if not assert will fire for us.
llvm-svn: 373481
removeUnreachableBlocks knows how to preserve the DomTree, so make use
of it instead of re-computing the DT.
Reviewers: davide, kuhar, brzycki
Reviewed By: davide, kuhar
Differential Revision: https://reviews.llvm.org/D68298
llvm-svn: 373430
Two small changes in llvm::removeUnreachableBlocks() to avoid unnecessary (re-)computation.
First, replace the use of count() with find(), which has better time complexity.
Second, because we have already computed the set of dead blocks, replace the second loop over all basic blocks to a loop only over the already computed dead blocks. This simplifies the loop and avoids recomputation.
Patch by Rodrigo Caetano Rocha <rcor.cs@gmail.com>
Reviewers: efriedma, spatel, fhahn, xbolva00
Reviewed By: fhahn, xbolva00
Differential Revision: https://reviews.llvm.org/D68191
llvm-svn: 373429
I submitted that patch after I got the LGTM, but the comments didn't
appear until after I submitted the change. This adds `const` to the
constructor argument and makes it a pointer.
llvm-svn: 373391
PR42924 points out that copying the GlobalsMetadata type during
construction of AddressSanitizer can result in exteremely lengthened
build times for translation units that have many globals. This can be addressed
by just making the GlobalsMD member in AddressSanitizer a reference to
avoid the copy. The GlobalsMetadata type is already passed to the
constructor as a reference anyway.
Differential Revision: https://reviews.llvm.org/D68287
llvm-svn: 373389
This patch implements a variation of a well known techniques for JIT compilers - we have an implementation in tree as LoopPredication - but with an interesting twist. This version does not assume the ability to execute a path which wasn't taken in the original program (such as a guard or widenable.condition intrinsic). The benefit is that this works for arbitrary IR from any frontend (including C/C++/Fortran). The tradeoff is that it's restricted to read only loops without implicit exits.
This builds on SCEV, and can thus eliminate the loop varying portion of the any early exit where all exits are understandable by SCEV. A key advantage is that fixing deficiency exposed in SCEV - already found one while writing test cases - will also benefit all of full redundancy elimination (and most other loop transforms).
I haven't seen anything in the literature which quite matches this. Given that, I'm not entirely sure that keeping the name "loop predication" is helpful. Anyone have suggestions for a better name? This is analogous to partial redundancy elimination - since we remove the condition flowing around the backedge - and has some parallels to our existing transforms which try to make conditions invariant in loops.
Factoring wise, I chose to put this in IndVarSimplify since it's a generally applicable to all workloads. I could split this off into it's own pass, but we'd then probably want to add that new pass every place we use IndVars. One solid argument for splitting it off into it's own pass is that this transform is "too good". It breaks a huge number of existing IndVars test cases as they tend to be simple read only loops. At the moment, I've opted it off by default, but if we add this to IndVars and enable, we'll have to update around 20 test files to add side effects or disable this transform.
Near term plan is to fuzz this extensively while off by default, reflect and discuss on the factoring issue mentioned just above, and then enable by default. I also need to give some though to supporting widenable conditions in this framing.
Differential Revision: https://reviews.llvm.org/D67408
llvm-svn: 373351
Expand the simplification of special cases of `log()` to include `log2()`
and `log10()` as well as intrinsics and more types.
Differential revision: https://reviews.llvm.org/D67199
llvm-svn: 373261
Summary:
The BasicBlockManager is potentially broken and should not be used.
Replace all uses of the BasicBlockPass with a FunctionBlockPass+loop on
blocks.
Reviewers: chandlerc
Subscribers: jholewinski, sanjoy.google, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68234
llvm-svn: 373254
With this patch, compiler generated profile variables will have its own COMDAT
name for ELF format, which syncs the behavior with COFF. Tested with clang
PGO bootstrap. This shows a modest reduction in object sizes in ELF format.
Differential Revision: https://reviews.llvm.org/D68041
llvm-svn: 373241
If we happen to have the same div in two basic blocks,
and in one of those we also happen to have the rem part,
we'd match the div-rem pair, but the wrong ones.
So let's drop overly-ambiguous assert.
Fixes https://bugs.llvm.org/show_bug.cgi?id=43500
llvm-svn: 373167
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
llvm-svn: 373166
profile symbol list.
Currently many existing users using profile-sample-accurate want to reduce
code size as much as possible. Their use cases are different from the scenario
profile symbol list tries to handle -- the major motivation of adding profile
symbol list is to get the major memory/code size saving without introduce
performance regression. So to keep the behavior of profile-sample-accurate
unchanged, we think decoupling these two things and using a new flag to
control the handling of profile symbol list may be better.
When profile-sample-accurate and the new flag profile-accurate-for-symsinlist
are both present, since profile-sample-accurate is a user assertion we let it
have a higher precedence.
Differential Revision: https://reviews.llvm.org/D68047
llvm-svn: 373133
Summary:
This is valid for any `sext` bitwidth pair:
```
Processing /tmp/opt.ll..
----------------------------------------
%signed = sext %y
%r = shl %x, %signed
ret %r
=>
%unsigned = zext %y
%r = shl %x, %unsigned
ret %r
%signed = sext %y
Done: 2016
Optimization is correct!
```
(This isn't so for funnel shifts, there it's illegal for e.g. i6->i7.)
Main motivation is the C++ semantics:
```
int shl(int a, char b) {
return a << b;
}
```
ends as
```
%3 = sext i8 %1 to i32
%4 = shl i32 %0, %3
```
https://godbolt.org/z/0jgqUq
which is, as this shows, too pessimistic.
There is another problem here - we can only do the fold
if sext is one-use. But we can trivially have cases
where several shifts have the same sext shift amount.
This should be resolved, later.
Reviewers: spatel, nikic, RKSimon
Reviewed By: spatel
Subscribers: efriedma, hiraditya, nlopes, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68103
llvm-svn: 373106
The static analyzer is warning about a potential null dereference, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 373099
The static analyzer is warning about a potential null dereference, but we should be able to use cast<FunctionSummary> directly and if not assert will fire for us.
llvm-svn: 373097
The static analyzer is warning about a potential null dereference, but we should be able to use cast<StructType> directly and if not assert will fire for us.
llvm-svn: 373095
We can't use short granules with stack instrumentation when targeting older
API levels because the rest of the system won't understand the short granule
tags stored in shadow memory.
Moreover, we need to be able to let old binaries (which won't understand
short granule tags) run on a new system that supports short granule
tags. Such binaries will call the __hwasan_tag_mismatch function when their
outlined checks fail. We can compensate for the binary's lack of support
for short granules by implementing the short granule part of the check in
the __hwasan_tag_mismatch function. Unfortunately we can't do anything about
inline checks, but I don't believe that we can generate these by default on
aarch64, nor did we do so when the ABI was fixed.
A new function, __hwasan_tag_mismatch_v2, is introduced that lets code
targeting the new runtime avoid redoing the short granule check. Because tag
mismatches are rare this isn't important from a performance perspective; the
main benefit is that it introduces a symbol dependency that prevents binaries
targeting the new runtime from running on older (i.e. incompatible) runtimes.
Differential Revision: https://reviews.llvm.org/D68059
llvm-svn: 373035
Summary:
This patch extends the current capabilities in loop fusion to fuse guarded loops
(as defined in https://reviews.llvm.org/D63885). The patch adds the necessary
safety checks to ensure that it safe to fuse the guarded loops (control flow
equivalent, no intervening code, and same guard conditions). It also provides an
alternative method to perform the actual fusion of guarded loops. The mechanics
to fuse guarded loops are slightly different then fusing non-guarded loops, so I
opted to keep them separate methods. I will be cleaning this up in later
patches, and hope to converge on a single method to fuse both guarded and
non-guarded loops, but for now I think the review will be easier to keep them
separate.
Reviewers: jdoerfert, Meinersbur, dmgreen, etiotto, Whitney
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65464
llvm-svn: 373018
For a runtime loop if we can compute its trip count upperbound:
Don't unroll if:
1. loop is not guaranteed to run either zero or upperbound iterations; and
2. trip count upperbound is less than UnrollMaxUpperBound
Unless user or TTI asked to do so.
If unrolling, limit unroll factor to loop's trip count upperbound.
Differential Revision: https://reviews.llvm.org/D62989
Change-Id: I6083c46a9d98b2e22cd855e60523fdc5a4929c73
llvm-svn: 373017
The test case here previously infinite looped. Only one element from the GEP is used so SimplifyDemandedVectorElts would replace the other lanes in each index with undef leading to the first index being <0, undef, undef, undef>. But there's a GEP transform that tries to replace an index into a 0 sized type with a zero index. But the zero index check only works on ConstantInt 0 or ConstantAggregateZero so it would turn the index back to zeroinitializer. Resulting in a loop.
The fix is to use m_Zero() to allow a vector of zeroes and undefs.
Differential Revision: https://reviews.llvm.org/D67977
llvm-svn: 373000
Summary:
FlattenCFG merges two 'if' basicblocks by inserting one basicblock
to another basicblock. The inserted basicblock can have a successor
that contains a PHI node whoes incoming basicblock is the inserted
basicblock. Since the existing code does not handle it, it becomes
a badref.
if (cond1)
statement
if (cond2)
statement
successor - contains PHI node whose predecessor is cond2
-->
if (cond1 || cond2)
statement
(BB for cond2 was deleted)
successor - contains PHI node whose predecessor is cond2 --> bad ref!
Author: Jaebaek Seo
Reviewers: asbirlea, kuhar, tstellar, chandlerc, davide, dexonsmith
Reviewed By: kuhar
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68032
llvm-svn: 372989
The static analyzer is warning about a potential null dereferences, but we should be able to use cast<BranchInst> directly and if not assert will fire for us.
llvm-svn: 372977
Summary:
Removing an assumption (assert) that the CmpInst already has been
simplified in getFlippedStrictnessPredicateAndConstant. Solution is
to simply bail out instead of hitting the assertion. Instead we
assume that any profitable rewrite will happen in the next iteration
of InstCombine.
The reason why we can't assume that the CmpInst already has been
simplified is that the worklist does not guarantee such an ordering.
Solves https://bugs.llvm.org/show_bug.cgi?id=43376
Reviewers: spatel, lebedev.ri
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68022
llvm-svn: 372972
The static analyzer is warning about a potential null dereferences, but we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 372960
The static analyzer is warning about a potential null dereference, but we should be able to use cast<MemIntrinsic> directly and if not assert will fire for us.
llvm-svn: 372959
For large functions, verifying the whole function after each loop takes
non-linear time.
Differential Revision: https://reviews.llvm.org/D67571
llvm-svn: 372924
https://rise4fun.com/Alive/KtL
This also shows that the fold added in D67412 / r372257
was too specific, and the new fold allows those test cases
to be handled more generically, therefore i delete now-dead code.
This is yet again motivated by
D67122 "[UBSan][clang][compiler-rt] Applying non-zero offset to nullptr is undefined behaviour"
llvm-svn: 372912
As @reames pointed out post-commit, rL371518 adds additional rounding
in some cases, when doing constant folding of the multiplication.
This breaks a guarantee llvm.fma makes and must be avoided.
This patch reapplies rL371518, but splits off the simplifications not
requiring rounding from SimplifFMulInst as SimplifyFMAFMul.
Reviewers: spatel, lebedev.ri, reames, scanon
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D67434
llvm-svn: 372899
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
If we generate the gc.relocate, and then later prove two arguments to the statepoint are equivalent, we should canonicalize the gc.relocate to the form we would have produced if this had been known before rewriting.
llvm-svn: 372771
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
For
```
#include <cassert>
char* test(char& base, signed long offset) {
__builtin_assume(offset < 0);
return &base + offset;
}
```
We produce
https://godbolt.org/z/r40U47
and again those two icmp's can be merged:
```
Name: 0
Pre: C != 0
%adjusted = add i8 %base, C
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ult i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, C
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/ALaphttps://rise4fun.com/Alive/slnN
There are 3 other variants of this pattern,
i believe they all will go into InstSimplify.
https://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67849
llvm-svn: 372768
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
This pattern isn't exactly what we get there
(strict vs. non-strict predicate), but this pattern does not
require known-bits analysis, so it is best to handle it first.
```
Name: 0
%adjusted = add i8 %base, %offset
%not_null = icmp ne i8 %adjusted, 0
%no_underflow = icmp ule i8 %adjusted, %base
%r = and i1 %not_null, %no_underflow
=>
%neg_offset = sub i8 0, %offset
%r = icmp ugt i8 %base, %neg_offset
```
https://rise4fun.com/Alive/knp
There are 3 other variants of this pattern,
they all will go into InstSimplify:
https://rise4fun.com/Alive/bIDZhttps://bugs.llvm.org/show_bug.cgi?id=43259
Reviewers: spatel, xbolva00, nikic
Reviewed By: spatel
Subscribers: hiraditya, majnemer, vsk, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67846
llvm-svn: 372767
The static analyzer is warning about a potential null dereference, but we should be able to use cast<CmpInst> directly and if not assert will fire for us.
llvm-svn: 372732
The static analyzer is warning about a potential null dereference, but we should be able to use cast<LandingPadInst> directly and if not assert will fire for us.
llvm-svn: 372727
The static analyzer is warning about a potential null dereference, but we should be able to use cast<Instruction> directly and if not assert will fire for us.
llvm-svn: 372726
When vectorisation is forced with a pragma, we optimise for min size, and we
need to emit runtime memory checks, then allow this code growth and don't run
in an assert like we currently do.
This is the result of D65197 and D66803, and was a use-case not really
considered before. If this now happens, we emit an optimisation remark warning
about the code-size expansion, which can be avoided by not forcing
vectorisation or possibly source-code modifications.
Differential Revision: https://reviews.llvm.org/D67764
llvm-svn: 372694
Summary:
Fold
or(ashr(subNSW(Y, X), ScalarSizeInBits(Y)-1), X)
into
X s> Y ? -1 : X
https://rise4fun.com/Alive/d8Ab
clamp255 is a common operator in image processing, can be implemented
in a shifty way "(255 - X) >> 31 | X & 255". Fold shift into select
enables more optimization, e.g., vmin generation for ARM target.
Reviewers: lebedev.ri, efriedma, spatel, kparzysz, bcahoon
Reviewed By: lebedev.ri
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67800
llvm-svn: 372678
When a cold path is outlined, the value tracking in the assumption cache may be
invalidated due to the code motion. We would previously trip an assertion in
subsequent passes (but required the passes to happen in a single run as the
assumption cache is shared across the passes). Invalidating the cache ensures
that we get the correct information when needed with the legacy pass manager as
well.
llvm-svn: 372667
is available
In rL372232, we treated names showing up in profile as not cold when
profile-sample-accurate is enabled. This caused 70k size regression in
Chrome/Android. The patch put a guard and only enable the change when
profile symbol list is available, i.e., keep the old behavior when profile
symbol list is not available.
Differential Revision: https://reviews.llvm.org/D67931
llvm-svn: 372665
"Implementations are free to malloc() a buffer containing either (size + 1) bytes or (strnlen(s, size) + 1) bytes. Applications should not assume that strndup() will allocate (size + 1) bytes when strlen(s) is smaller than size."
llvm-svn: 372647
Summary:
Motivation:
- If we can fold it to strdup, we should (strndup does more things than strdup).
- Annotation mechanism. (Works for strdup well).
strdup and strndup are part of C 20 (currently posix fns), so we should optimize them.
Reviewers: efriedma, jdoerfert
Reviewed By: jdoerfert
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67679
llvm-svn: 372636
Summary:
If we have a pattern `(x & (-1 >> maskNbits)) << shiftNbits`,
we already know (have a fold) that will drop the `& (-1 >> maskNbits)`
mask iff `(shiftNbits-maskNbits) s>= 0` (i.e. `shiftNbits u>= maskNbits`).
So even if `(shiftNbits-maskNbits) s< 0`, we can still
fold, we will just need to apply a **constant** mask afterwards:
```
Name: c, normal+mask
%t0 = lshr i32 -1, C1
%t1 = and i32 %t0, %x
%r = shl i32 %t1, C2
=>
%n0 = shl i32 %x, C2
%n1 = i32 ((-(C2-C1))+32)
%n2 = zext i32 %n1 to i64
%n3 = lshr i64 -1, %n2
%n4 = trunc i64 %n3 to i32
%r = and i32 %n0, %n4
```
https://rise4fun.com/Alive/gslRa
Naturally, old `%masked` will have to be one-use.
This is not valid for pattern f - where "masking" is done via `ashr`.
https://bugs.llvm.org/show_bug.cgi?id=42563
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67725
llvm-svn: 372630
Summary:
And this is **finally** the interesting part of that fold!
If we have a pattern `(x & (~(-1 << maskNbits))) << shiftNbits`,
we already know (have a fold) that will drop the `& (~(-1 << maskNbits))`
mask iff `(maskNbits+shiftNbits) u>= bitwidth(x)`.
But that is actually ignorant, there's more general fold here:
In this pattern, `(maskNbits+shiftNbits)` actually correlates
with the number of low bits that will remain in the final value.
So even if `(maskNbits+shiftNbits) u< bitwidth(x)`, we can still
fold, we will just need to apply a **constant** mask afterwards:
```
Name: a, normal+mask
%onebit = shl i32 -1, C1
%mask = xor i32 %onebit, -1
%masked = and i32 %mask, %x
%r = shl i32 %masked, C2
=>
%n0 = shl i32 %x, C2
%n1 = add i32 C1, C2
%n2 = zext i32 %n1 to i64
%n3 = shl i64 -1, %n2
%n4 = xor i64 %n3, -1
%n5 = trunc i64 %n4 to i32
%r = and i32 %n0, %n5
```
https://rise4fun.com/Alive/F5R
Naturally, old `%masked` will have to be one-use.
Similar fold exists for patterns c,d,e, will post patch later.
https://bugs.llvm.org/show_bug.cgi?id=42563
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67677
llvm-svn: 372629
Summary:
Initially SLP vectorizer replaced all going-to-be-vectorized
instructions with Undef values. It may break ScalarEvaluation and may
cause a crash.
Reworked SLP vectorizer so that it does not replace vectorized
instructions by UndefValue anymore. Instead vectorized instructions are
marked for deletion inside if BoUpSLP class and deleted upon class
destruction.
Reviewers: mzolotukhin, mkuper, hfinkel, RKSimon, davide, spatel
Subscribers: RKSimon, Gerolf, anemet, hans, majnemer, llvm-commits, sanjoy
Differential Revision: https://reviews.llvm.org/D29641
llvm-svn: 372626
Enable flag introduced in rL294998. Security concerns are no longer valid, since function signatures for mentioned libc functions has no nonnull attribute (Clang does not generate them? I see no nonnull attr in LLVM IR for these functions) and since rL372091 we carefully annotate the callsites where we know that size is static, non zero. So let's enable this flag again..
llvm-svn: 372573
This has the potential to uncover missed analysis/folds as shown in the
min/max code comment/test, but fewer restrictions on icmp folds should
be better in general to solve cases like:
https://bugs.llvm.org/show_bug.cgi?id=43310
llvm-svn: 372510
While Promoting alloca instruction of Vector Type,
Check total size in bits of its slices too.
If they don't match, don't promote the alloca instruction.
Bug : https://bugs.llvm.org/show_bug.cgi?id=42585
llvm-svn: 372480
Summary:
This patch introduces `norecurse` function attribute deduction.
`norecurse` will be deduced if the following conditions hold:
* The size of SCC in which the function belongs equals to 1.
* The function doesn't have self-recursion.
* We have `norecurse` for all call site.
To avoid a large change, SCC is calculated using scc_iterator in InfoCache initialization for now.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67751
llvm-svn: 372475
The static analyzer is warning about potential null dereference, but we can use cast<ConstantInt> directly and if not assert will fire for us.
llvm-svn: 372429
objc_release calls
This fixes a bug where the presence of debug instructions would cause
ARC optimizer to change the order of retain and release calls.
rdar://problem/55319419
llvm-svn: 372352
Summary:
FlattenCFG may erase unnecessary blocks, which also invalidates iterators to those erased blocks.
Before this patch, `iterativelyFlattenCFG` could try to increment a BB iterator after that BB has been removed and crash.
This patch makes FlattenCFGPass use `WeakVH` to skip over erased blocks.
Reviewers: dblaikie, tstellar, davide, sanjoy, asbirlea, grosser
Reviewed By: asbirlea
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67672
llvm-svn: 372347
Summary:
This is again motivated by D67122 sanitizer check enhancement.
That patch seemingly worsens `-fsanitize=pointer-overflow`
overhead from 25% to 50%, which strongly implies missing folds.
In this particular case, given
```
char* test(char& base, unsigned long offset) {
return &base - offset;
}
```
it will end up producing something like
https://godbolt.org/z/luGEju
which after optimizations reduces down to roughly
```
declare void @use64(i64)
define i1 @test(i8* dereferenceable(1) %base, i64 %offset) {
%base_int = ptrtoint i8* %base to i64
%adjusted = sub i64 %base_int, %offset
call void @use64(i64 %adjusted)
%not_null = icmp ne i64 %adjusted, 0
%no_underflow = icmp ule i64 %adjusted, %base_int
%no_underflow_and_not_null = and i1 %not_null, %no_underflow
ret i1 %no_underflow_and_not_null
}
```
Without D67122 there was no `%not_null`,
and in this particular case we can "get rid of it", by merging two checks:
Here we are checking: `Base u>= Offset && (Base u- Offset) != 0`, but that is simply `Base u> Offset`
Alive proofs:
https://rise4fun.com/Alive/QOs
The `@llvm.usub.with.overflow` pattern itself is not handled here
because this is the main pattern, that we currently consider canonical.
https://bugs.llvm.org/show_bug.cgi?id=43251
Reviewers: spatel, nikic, xbolva00, majnemer
Reviewed By: xbolva00, majnemer
Subscribers: vsk, majnemer, xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67356
llvm-svn: 372341
In the example from:
https://bugs.llvm.org/show_bug.cgi?id=38502
...we hit infinite looping/crashing because we have non-standard IR -
an instruction operand is used before defined.
This and other unusual constructs are allowed in unreachable blocks,
so avoid the problem by using DominatorTree to step around landmines.
Differential Revision: https://reviews.llvm.org/D67766
llvm-svn: 372339
Add an ability to specify the max full unroll count for LoopUnrollPass pass
in pass options.
Reviewers: fhahn, fedor.sergeev
Reviewed By: fedor.sergeev
Subscribers: hiraditya, zzheng, dmgreen, llvm-commits
Differential Revision: https://reviews.llvm.org/D67701
llvm-svn: 372305
MSAN bot complains that there is use-of-uninitialized-value
of this FreeStores later in IsWorthwhile().
Perhaps FreeStores needs to be stored in a vector?
llvm-svn: 372262
Summary:
I don't have a direct motivational case for this,
but it would be good to have this for completeness/symmetry.
This pattern is basically the motivational pattern from
https://bugs.llvm.org/show_bug.cgi?id=43251
but with different predicate that requires that the offset is non-zero.
The completeness bit comes from the fact that a similar pattern (offset != zero)
will be needed for https://bugs.llvm.org/show_bug.cgi?id=43259,
so it'd seem to be good to not overlook very similar patterns..
Proofs: https://rise4fun.com/Alive/21b
Also, there is something odd with `isKnownNonZero()`, if the non-zero
knowledge was specified as an assumption, it didn't pick it up (PR43267)
With this, i see no other missing folds for
https://bugs.llvm.org/show_bug.cgi?id=43251
Reviewers: spatel, nikic, xbolva00
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67412
llvm-svn: 372257
Summary:
As it can be see in the changed test, while `div` is really costly,
we were speculating it. This does not seem correct.
Also, the old code would run for every single insturuction in BB,
instead of eagerly bailing out as soon as there are too many instructions.
This function still has a problem that `PHINodeFoldingThreshold` is
per-basic-block, while it should be for all the basic blocks.
Reviewers: efriedma, craig.topper, dmgreen, jmolloy
Reviewed By: jmolloy
Subscribers: xbolva00, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67315
llvm-svn: 372255
is enabled.
We can save memory and reduce binary size significantly by enabling
ProfileSampleAccurate. However when ProfileSampleAccurate is true,
function without sample will be regarded as cold and this could
potentially cause performance regression.
To minimize the potential negative performance impact, we want to be
a little conservative here saying if a function shows up in the profile,
no matter as outline instance, inline instance or call targets, treat
the function as not being cold. This will handle the cases such as most
callsites of a function are inlined in sampled binary (thus outline copy
don't get any sample) but not inlined in current build (because of source
code drift, imprecise debug information, or the callsites are all cold
individually but not cold accumulatively...), so that the outline function
showing up as cold in sampled binary will actually not be cold after current
build. After the change, such function will be treated as not cold even
profile-sample-accurate is enabled.
At the same time we lower the hot criteria of callsiteIsHot check when
profile-sample-accurate is enabled. callsiteIsHot is used to determined
whether a callsite is hot and qualified for early inlining. When
profile-sample-accurate is enabled, functions without profile will be
regarded as cold and much less inlining will happen in CGSCC inlining pass,
so we can worry less about size increase and be aggressive to allow more
early inlining to happen for warm callsites and it is helpful for performance
overall.
Differential Revision: https://reviews.llvm.org/D67561
llvm-svn: 372232
Summary:
The PGO counter reading will add cold and inlinehint (hot) attributes
to functions that are very cold or hot. This was using hardcoded
thresholds, instead of the profile summary cutoffs which are used in
other hot/cold detection and are more dynamic and adaptable. Switch
to using the summary-based cold/hot detection.
The hardcoded limits were causing some code that had a medium level of
hotness (per the summary) to be incorrectly marked with a cold
attribute, blocking inlining.
Reviewers: davidxl
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67673
llvm-svn: 372189
Sanjay Patel