Building a vector out of multiple loads can be converted to a load of the vector type if the loads are consecutive.
But the special condition is that the element number is 1, such as <1 x i128>. So just early exit to fix the assert.
Patch By: wuzish (Zixuan Wu)
Differential Revision: https://reviews.llvm.org/D52072
llvm-svn: 342611
- Instead of having both `SUnit::dump(ScheduleDAG*)` and
`ScheduleDAG::dumpNode(ScheduleDAG*)`, just keep the latter around.
- Add `ScheduleDAG::dump()` and avoid code duplication in several
places. Implement it for different ScheduleDAG variants.
- Add `ScheduleDAG::dumpNodeName()` in favor of the `SUnit::print()`
functions. They were only ever used for debug dumping and putting the
function into ScheduleDAG is consistent with the `dumpNode()` change.
llvm-svn: 342520
This is a follow-up to the previous patch that eliminated some of the rotates.
With this addition, we will also emit the record-form andis.
This patch increases the number of record-form rotates we eliminate by
more than 70%.
Differential revision: https://reviews.llvm.org/D44897
llvm-svn: 342478
Both ANDIo and ANDISo (and the 64-bit versions) are record-form instructions.
When optimizing compares, we handle the former in order to eliminate the compare
instruction but not the latter. This patch just adds the latter to the set of
instructions we optimize.
The reason these instructions need to be handled separately is that they are not
part of the RecFormRel map (since they don't have a non-record-form). The
missing "and-immediate-shifted" is just an oversight in the initial
implementation.
Differential revision: https://reviews.llvm.org/D51353
llvm-svn: 342472
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch By: jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D52040
llvm-svn: 342441
Summary:
Integer types smaller than i32 must be extended to i32 by default.
The feature "crbits" introduced at r202451 handles i1 as a special case,
but it did not extend properly.
The caller was, therefore, passing i1 stack arguments by writing 0/1 to
the first byte of the 4-byte stack object and callee was
reading the first byte for the value.
"crbits" is enabled if the optimization level is greater than 1,
which is very common in "release builds".
Such discrepancies with ABI specification also introduces
potential incompatibility with programs or libraries
built with other compilers e.g. GCC.
Fixes PR38661
Reviewers: hfinkel, cuviper
Subscribers: sylvestre.ledru, glaubitz, nagisa, nemanjai, kbarton, llvm-commits
Differential Revision: https://reviews.llvm.org/D51108
llvm-svn: 342288
Disassemblers cannot depend on main target headers. The same is true for
MCTargetDesc, but there's a lot more cleanup needed for that.
llvm-svn: 341822
When doing some instruction scheduling work, we noticed some missing itineraries.
Before we switch to machine scheduler, those missing itineraries might not have impact to actually scheduling,
because we can still get same latency due to default values.
With machine scheduler, however, itineraries will have impact to scheduling.
eg: NumMicroOps will default to be 0 if there is NO itineraries for specific instruction class.
And most of the instruction class with itineraries will have NumMicroOps default to 1.
This will has impact on the count of RetiredMOps, affects the Pending/Available Queue,
then causing different scheduling or suboptimal scheduling further.
Patch by jsji (Jinsong Ji)
Differential Revision: https://reviews.llvm.org/D51506
llvm-svn: 341293
This patch issues an error message if Darwin ABI is attempted with the PPC
backend. It also cleans up existing test cases, either converting the test to
use an alternative triple or removing the test if the coverage is no longer
needed.
Updated Tests
-------------
The majority of test cases were updated to use a different triple that does not
include the Darwin ABI. Many tests were also updated to use FileCheck, in place
of grep.
Deleted Tests
-------------
llvm/test/tools/dsymutil/PowerPC/sibling.test was originally added to test
specific functionality of dsymutil using an object file created with an old
version of llvm-gcc for a Powerbook G4. After a discussion with @JDevlieghere he
suggested removing the test.
llvm/test/CodeGen/PowerPC/combine_loads_from_build_pair.ll was converted from a
PPC test to a SystemZ test, as the behavior is also reproducible there.
All other tests that were deleted were specific to the darwin/ppc ABI and no
longer necessary.
Phabricator Review: https://reviews.llvm.org/D50988
llvm-svn: 340795
Loosens an assert in getMemRIX16Encoding that restricts DQ-form instructions to
using an immediate, so that we can assemble instructions like lxv/stxv where the
offset is an expression.
Differential Revision: https://reviews.llvm.org/D51122
llvm-svn: 340761
This commit has caused failures in some internal benchmarks. Temporarily
reverting this patch until the issue can be diagnosed and fixed.
llvm-svn: 340740
The internal benchmark failure reported by Google was due to a missing
check for the result type for the sign-extend and shift DAG. This commit
adds the check and re-commits the patch.
llvm-svn: 340734
This patch will address using the xscpsgndp instruction to copy floating point
scalar registers instead of the xxlor (specifically XXLORf) instruction that is
currently used. Additionally, this patch of utilizing xscpsgndp will apply to
P9, while pre-P9 will still use xxlor.
Patch by amyk
Differential Revision: https://reviews.llvm.org/D50004
llvm-svn: 340643
If the arch is P8, we will select XFLOAD to load the floating point, and then, expand it to vsx and non-vsx X-form instruction post RA. This patch is trying to convert the X-form to D-form if it meets the requirement that one operand of the x-form inst is the special Zero register, and another operand fed by add inst. i.e.
y = add imm, reg
LFDX. 0, y
-->
LFD imm(reg)
Reviewers: Nemanjai
Differential Revision: https://reviews.llvm.org/D49007
llvm-svn: 340149
This patch addresses:
- Implementation within PPCISelLowering.cpp to check if we should use direct
load into vector instructions (such as lxsd/lfd ) when the scalar_to_vector
function is used; which will allow us to catch as many cases of the
scalar_to_vector uses as possible to translate the ld->mtvsrd sequence into
lxsd.
- Test cases to exhibit the behaviour of emitting lxsd/lfd.
Patch by amyk
Differential revision: https://reviews.llvm.org/D49698
llvm-svn: 340037
Add a DAG combine for the PowerPC code generator to generate the Power9 extswsli
extend sign and shift immediate instruction.
Patch by RolandF.
Differential revision: https://reviews.llvm.org/D49879
llvm-svn: 340016
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
To make ISD::VSELECT available(legal) so long as there are altivec instruction,
otherwise it's default behavior is expanding.
Use xxsel to match vselect if vsx is open, or use vsel.
In order to do not write many patterns in td file, promote (for vector it's
bitcast) all other type into v4i32 and only pattern match vselect of v4i32 into
vsel or xxsel.
Patch by wuzish
Differential revision: https://reviews.llvm.org/D49531
llvm-svn: 339779
When trying to combine a DAG that builds a vector out of sign-extensions of
vector extracts, the code assumes legal input types. Due to that, we have to
disable this combine prior to legalization.
In some cases, the DAG will look slightly different after legalization so
account for that in the matching code.
This is a fix for https://bugs.llvm.org/show_bug.cgi?id=38087
Differential Revision: https://reviews.llvm.org/D49080
llvm-svn: 339769
`MachineMemOperand` pointers attached to `MachineSDNodes` and instead
have the `SelectionDAG` fully manage the memory for this array.
Prior to this change, the memory management was deeply confusing here --
The way the MI was built relied on the `SelectionDAG` allocating memory
for these arrays of pointers using the `MachineFunction`'s allocator so
that the raw pointer to the array could be blindly copied into an
eventual `MachineInstr`. This creates a hard coupling between how
`MachineInstr`s allocate their array of `MachineMemOperand` pointers and
how the `MachineSDNode` does.
This change is motivated in large part by a change I am making to how
`MachineFunction` allocates these pointers, but it seems like a layering
improvement as well.
This would run the risk of increasing allocations overall, but I've
implemented an optimization that should avoid that by storing a single
`MachineMemOperand` pointer directly instead of allocating anything.
This is expected to be a net win because the vast majority of uses of
these only need a single pointer.
As a side-effect, this makes the API for updating a `MachineSDNode` and
a `MachineInstr` reasonably different which seems nice to avoid
unexpected coupling of these two layers. We can map between them, but we
shouldn't be *surprised* at where that occurs. =]
Differential Revision: https://reviews.llvm.org/D50680
llvm-svn: 339740
This patch aims to improve the codegen for vector loads involving the
scalar_to_vector (load X) sequence. Initially, ld->mv instructions were used
for scalar_to_vector (load X), so this patch allows scalar_to_vector (load X)
to utilize:
LXSD and LXSDX for i64 and f64
LXSIWAX for i32 (sign extension to i64)
LXSIWZX for i32 and f64
Committing on behalf of Amy Kwan.
Differential Revision: https://reviews.llvm.org/D48950
llvm-svn: 339260
Adding the FP_ROUND nodes when combining FP_TO_[SU]INT of elements
feeding a BUILD_VECTOR into an FP_TO_[SU]INT of the built vector
loses precision. This patch removes the code that adds these nodes
to true f64 operands. It also adds patterns required to ensure
the code is still vectorized rather than converting individual
elements and inserting into a vector.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38342
Differential Revision: https://reviews.llvm.org/D50121
llvm-svn: 338658
The vector contains the SDNodes that these functions create. The number of nodes is always a small number so we should use SmallVector to avoid a heap allocation.
llvm-svn: 338329
As we already return true from needsAggressiveScheduling() for the most recent
hardware it would be cleaner to just return true for all PowerPC hardware.
Differential Revision: https://reviews.llvm.org/D48663
llvm-svn: 337488
* Delete a no-longer-used override, and mark the other
getRegisterTypeForCallingConv() as override.
* SPE only supports i32, not i64, as the internal type, so simply remove
the type check, so that DestReg and Opc are provably always set.
GCC 6.4 did not warn about either of the above.
llvm-svn: 337350
Summary:
The Signal Processing Engine (SPE) is found on NXP/Freescale e500v1,
e500v2, and several e200 cores. This adds support targeting the e500v2,
as this is more common than the e500v1, and is in SoCs still on the
market.
This patch is very intrusive because the SPE is binary incompatible with
the traditional FPU. After discussing with others, the cleanest
solution was to make both SPE and FPU features on top of a base PowerPC
subset, so all FPU instructions are now wrapped with HasFPU predicates.
Supported by this are:
* Code generation following the SPE ABI at the LLVM IR level (calling
conventions)
* Single- and Double-precision math at the level supported by the APU.
Still to do:
* Vector operations
* SPE intrinsics
As this changes the Callee-saved register list order, one test, which
tests the precise generated code, was updated to account for the new
register order.
Reviewed by: nemanjai
Differential Revision: https://reviews.llvm.org/D44830
llvm-svn: 337347
This is the lead-up to having SPE codegen. Add the rest of the
instructions, along with MC tests.
Differential Revision: https://reviews.llvm.org/D44829
llvm-svn: 337346
Revision r322373 fixed a bug in how we materialize constants when the CR-field
needs to be set.
However the fix is overly conservative. It will only do the transform if
AND-ing the input with the new constant produces the same new constant.
This is of course correct, but not necessarily required.
If there are no futher uses of the constant, the constant can be changed.
If there are no uses of the GPR result, the final result of the materialization
isn't important other than it needs to compare to zero correctly (lt, gt, eq).
Differential revision: https://reviews.llvm.org/D42109
llvm-svn: 337008
Added __float128 support for a number of rounding operations:
trunc
rint
nearbyint
round
floor
ceil
Differential Revision: https://reviews.llvm.org/D48415
llvm-svn: 336601
Power 9 does not have a hardware instruction for frem but we can call fmodf128.
Differential Revision: https://reviews.llvm.org/D48552
llvm-svn: 336406
Map the following instructions to the proper float128 lib calls:
pow[i], exp[2], log[2|10], sin, cos, fmin, fmax
Differential Revision: https://reviews.llvm.org/D48544
llvm-svn: 336361
Optimize code sequences for integer conversion to fp128 when the integer is a result of:
* float->int
* float->long
* double->int
* double->long
Differential Revision: https://reviews.llvm.org/D48429
llvm-svn: 336316
Non-homogenous aggregates are passed in consecutive GPRs, in GPRs and in memory,
or in memory. This patch ensures that float128 members of non-homogenous
aggregates are passed via VSX registers.
This is done via custom lowering a bitcast of a build_pari(i64,i64) to float128
to a new PPCISD node, BUILD_FP128.
Differential Revision: https://reviews.llvm.org/D48308
llvm-svn: 336310
Legalize and emit code for quad-precision floating point operation conversion of
single-precision value to quad-precision.
Differential Revision: https://reviews.llvm.org/D47569
llvm-svn: 336307
This patch enable parameter passing and return by value for float128 types.
Passing aggregate/union which contain float128 members will be submitted in
subsequent patches.
Differential Revision: https://reviews.llvm.org/D47552
llvm-svn: 336306
Legalize and emit code for round & convert float128 to double precision and
single precision.
Differential Revision: https://reviews.llvm.org/D46997
llvm-svn: 336299
QingShan Zhang