If .rela.plt is mentioned in a linker script, it might be preserved
even if it is empty. In that case, LLD created DT_JMPREL and DT_PLTGOT
dynamic tags. When the tags exist, a dynamic loader writes values into
reserved slots in .got.plt to support lazy symbol resolution.
The problem is that, in fact, the linker has not reserved that space,
and the writing may occur into the memory allocated for something else.
Differential Revision: https://reviews.llvm.org/D63869
llvm-svn: 364639
If .sdata is absent, linker synthesized __global_pointer$ gets a section index of SHN_ABS.
(ld.bfd has a similar issue: binutils PR24678)
Scrt1.o may use `lla gp, __global_pointer$` to reference the symbol PC
relatively. In -pie/-shared mode, lld complains if a PC relative
relocation references an absolute symbol (SHN_ABS) but ld.bfd doesn't:
ld.lld: error: relocation R_RISCV_PCREL_HI20 cannot refer to lute symbol: __global_pointer$
Let the reference of __global_pointer$ to force creation of .sdata to
fix the problem. This is similar to _GLOBAL_OFFSET_TABLE_, which forces
creation of .got or .got.plt .
Also, change the visibility from STV_HIDDEN to STV_DEFAULT and don't
define the symbol for -shared. This matches ld.bfd, though I don't
understand why it uses STV_DEFAULT.
Reviewed By: ruiu, jrtc27
Differential Revision: https://reviews.llvm.org/D63132
llvm-svn: 363351
We create several types of synthetic sections for loadable partitions, including:
- The dynamic symbol table. This allows code outside of the loadable partitions
to find entry points with dlsym.
- Creating a dynamic symbol table also requires the creation of several other
synthetic sections for the partition, such as the dynamic table and hash table
sections.
- The partition's ELF header is represented as a synthetic section in the
combined output file, and will be used by llvm-objcopy to extract partitions.
Differential Revision: https://reviews.llvm.org/D62350
llvm-svn: 362819
Branch Target Identification (BTI) and Pointer Authentication (PAC) are
architecture features introduced in v8.5a and 8.3a respectively. The new
instructions have been added in the hint space so that binaries take
advantage of support where it exists yet still run on older hardware. The
impact of each feature is:
BTI: For executable pages that have been guarded, all indirect branches
must have a destination that is a BTI instruction of the appropriate type.
For the static linker, this means that PLT entries must have a "BTI c" as
the first instruction in the sequence. BTI is an all or nothing
property for a link unit, any indirect branch not landing on a valid
destination will cause a Branch Target Exception.
PAC: The dynamic loader encodes with PACIA the address of the destination
that the PLT entry will load from the .plt.got, placing the result in a
subset of the top-bits that are not valid virtual addresses. The PLT entry
may authenticate these top-bits using the AUTIA instruction before
branching to the destination. Use of PAC in PLT sequences is a contract
between the dynamic loader and the static linker, it is independent of
whether the relocatable objects use PAC.
BTI and PAC are independent features that can be combined. So we can have
several combinations of PLT:
- Standard with no BTI or PAC
- BTI PLT with "BTI c" as first instruction.
- PAC PLT with "AUTIA1716" before the indirect branch to X17.
- BTIPAC PLT with "BTI c" as first instruction and "AUTIA1716" before the
first indirect branch to X17.
The use of BTI and PAC in relocatable object files are encoded by feature
bits in the .note.gnu.property section in a similar way to Intel CET. There
is one AArch64 specific program property GNU_PROPERTY_AARCH64_FEATURE_1_AND
and two target feature bits defined:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI
-- All executable sections are compatible with BTI.
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC
-- All executable sections have return address signing enabled.
Due to the properties of FEATURE_1_AND the static linker can tell when all
input relocatable objects have the BTI and PAC feature bits set. The static
linker uses this to enable the appropriate PLT sequence.
Neither -> standard PLT
GNU_PROPERTY_AARCH64_FEATURE_1_BTI -> BTI PLT
GNU_PROPERTY_AARCH64_FEATURE_1_PAC -> PAC PLT
Both properties -> BTIPAC PLT
In addition to the .note.gnu.properties there are two new command line
options:
--force-bti : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_BTI and warn for every relocatable object
that does not.
--pac-plt : Act as if all relocatable inputs had
GNU_PROPERTY_AARCH64_FEATURE_1_PAC. As PAC is a contract between the loader
and static linker no warning is given if it is not present in an input.
Two processor specific dynamic tags are used to communicate that a non
standard PLT sequence is being used.
DTI_AARCH64_BTI_PLT and DTI_AARCH64_BTI_PAC.
Differential Revision: https://reviews.llvm.org/D62609
llvm-svn: 362793
Many -static/-no-pie/-shared/-pie applications linked against glibc or musl
should work with this patch. This also helps FreeBSD PowerPC64 to migrate
their lib32 (PR40888).
* Fix default image base and max page size.
* Support new-style Secure PLT (see below). Old-style BSS PLT is not
implemented, so it is not suitable for FreeBSD rtld now because it doesn't
support Secure PLT yet.
* Support more initial relocation types:
R_PPC_ADDR32, R_PPC_REL16*, R_PPC_LOCAL24PC, R_PPC_PLTREL24, and R_PPC_GOT16.
The addend of R_PPC_PLTREL24 is special: it decides the call stub PLT type
but it should be ignored for the computation of target symbol VA.
* Support GNU ifunc
* Support .glink used for lazy PLT resolution in glibc
* Add a new thunk type: PPC32PltCallStub that is similar to PPC64PltCallStub.
It is used by R_PPC_REL24 and R_PPC_PLTREL24.
A PLT stub used in -fPIE/-fPIC usually loads an address relative to
.got2+0x8000 (-fpie/-fpic code uses _GLOBAL_OFFSET_TABLE_ relative
addresses).
Two .got2 sections in two object files have different addresses, thus a PLT stub
can't be shared by two object files. To handle this incompatibility,
change the parameters of Thunk::isCompatibleWith to
`const InputSection &, const Relocation &`.
PowerPC psABI specified an old-style .plt (BSS PLT) that is both
writable and executable. Linkers don't make separate RW- and RWE segments,
which causes all initially writable memory (think .data) executable.
This is a big security concern so a new PLT scheme (secure PLT) was developed to
address the security issue.
TLS will be implemented in D62940.
glibc older than ~2012 requires .rela.dyn to include .rela.plt, it can
not handle the DT_RELA+DT_RELASZ == DT_JMPREL case correctly. A hack
(not included in this patch) in LinkerScript.cpp addOrphanSections() to
work around the issue:
if (Config->EMachine == EM_PPC) {
// Older glibc assumes .rela.dyn includes .rela.plt
Add(In.RelaDyn);
if (In.RelaPlt->isLive() && !In.RelaPlt->Parent)
In.RelaDyn->getParent()->addSection(In.RelaPlt);
}
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D62464
llvm-svn: 362721
GotEntrySize and GotPltEntrySize were added in D22288. Later, with
the introduction of wordsize() (then Config->Wordsize), they become
redundant, because there is no target that sets GotEntrySize or
GotPltEntrySize to a number different from Config->Wordsize.
Reviewed By: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D62727
llvm-svn: 362220
This change causes us to read partition specifications from partition
specification sections and split output sections into partitions according
to their reachability from partition entry points.
This is only the first step towards a full implementation of partitions. Later
changes will add additional synthetic sections to each partition so that
they can be loaded independently.
Differential Revision: https://reviews.llvm.org/D60353
llvm-svn: 361925
We currently sort dynamic relocations by (!is_relative,symbol_index).
Add r_offset as the third key. This makes `readelf -r` debugging easier
(relocations to the same symbol are ordered by r_offset).
Refactor the test combreloc.s (renamed from combrelocs.s) to check
R_X86_64_RELATIVE, and delete --expand-relocs.
The difference from the reverted D61477 is that we keep !is_relative as
the first key. In local dynamic TLS model, DTPMOD (e.g.
R_ARM_TLS_DTPMOD32 R_X86_64_DTPMOD and R_PPC{,64}_DTPMOD) may use 0 as
the symbol index.
Reviewed By: grimar
Differential Revision: https://reviews.llvm.org/D62141
llvm-svn: 361164
This reverts commit r361125. This linker change breaks shared libraries
in some subtle way on x86_64. (Specifically, gold segfaults when
loading the LLVMgold.so plugin linked with lldb with this patch.)
llvm-svn: 361150
Fixes PR41692.
We currently sort dynamic relocations by (!is_relative,symbol_index).
Change it to (symbol_index,r_offset). We still place relative
relocations first because R_*_RELATIVE are the only dynamic relocations
with 0 symbol index (except on MIPS, which doesn't use DT_REL[A]COUNT
anyway).
This makes `readelf -r` debugging easier (relocations to the same symbol
are ordered by r_offset).
Refactor the test combreloc.s (renamed from combrelocs.s) to check
R_X86_64_RELATIVE, and delete --expand-relocs.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61477
llvm-svn: 361125
See D61891: llvm had a bug that might create invalid (DW_AT_low_pc,DW_AT_high_pc) pairs or range list entries due to missing DW_AT_addr_base.
Reviewed By: ruiu
Differential Revision: https://reviews.llvm.org/D61889
llvm-svn: 360679
Make some small adjustment while touching the code: make parameters
const, use less_first(), etc.
Differential Revision: https://reviews.llvm.org/D60989
llvm-svn: 358943
Summary:
We access Live and OutputOff (which may share the same memory location)
concurrently in 2 parallelForEachN loops. Separating them avoids subtle
data races like D41884/PR35788. This patch places Live and Hash
together.
2 reasons this is appealing:
1) Hash is immutable. Live is almost read-only - only written once in MarkLive.cpp where
Hash is not accessed
2) we already discard low bits of Hash to decide ShardID. It doesn't
matter much if we make 32-bit Hash to 31-bit.
For a huge internal clang -O3 executable (1.6GiB),
`Strings` in StringTableBuilder::finalizeStringTable contains at most 310253 elements.
The expected number of pair-wise collisions 2^(-31) * C(310253,2) ~= 22.41 is too small to have a negative impact on performance.
Actually, my benchmark shows there is actually a minor performance improvement.
Differential Revision: https://reviews.llvm.org/D60765
llvm-svn: 358645
With partitions, each partition should have the same build id. This means
that the build id needs to be only computed once, otherwise we will end up
with different build ids in each partition as a result of the file contents
changing. This change moves the computation of the build id into Writer so
that it only happens once.
Differential Revision: https://reviews.llvm.org/D60342
llvm-svn: 358536
The typo was introduced to llvm MC in rL204769 (fixed in rL358247) and then to lld.
Also, for relocatable-many-sections.s, the size of .symtab changed at some point and the formula needs update.
llvm-svn: 358248
For partitions I intend to use the same set of version indexes in
each partition for simplicity. Since each partition will need its own
VersionNeedSection this will require moving the verneed tracking out of
VersionNeedSection. The way I've done this is to move most of the tracking
into SharedFile. What will eventually become the per-partition tracking
still lives in VersionNeedSection.
As a bonus the code gets a little simpler and more consistent with how we
handle verdef.
Differential Revision: https://reviews.llvm.org/D60307
llvm-svn: 357926
And rename the function to combineEhSections(). This makes the processing
of .ARM.exidx even more similar to .eh_frame and means that we can avoid an
additional loop over InputSections.
Differential Revision: https://reviews.llvm.org/D60026
llvm-svn: 357417
Summary:
Some synthetic sections can be empty while still being needed, thus they
can't be removed by removeUnusedSyntheticSections(). Rename this member
function to more appropriate isNeeded() with the opposite meaning.
No functional change intended.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: jhenderson, grimar, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59982
llvm-svn: 357377
Recommit r356666 with fixes for buildbot failure, as well as handling for
--emit-relocs, which we decide not to emit any relocation sections as the
table is already position independent and an offline tool can deduce the
relocations.
Instead of creating extra Synthetic .ARM.exidx sections to account for
gaps in the table, create a single .ARM.exidx SyntheticSection that can
derive the contents of the gaps from a sorted list of the executable
InputSections. This has the benefit of moving the ARM specific code for
SyntheticSections in SHF_LINK_ORDER processing and the table merging code
into the ARM specific SyntheticSection. This also makes it easier to create
EXIDX_CANTUNWIND table entries for executable InputSections that don't
have an associated .ARM.exidx section.
Fixes pr40277
Differential Revision: https://reviews.llvm.org/D59216
llvm-svn: 357160
Summary:
This should address remaining issues discussed in PR36555.
Currently R_GOT*_FROM_END are exclusively used by x86 and x86_64 to
express relocations types relative to the GOT base. We have
_GLOBAL_OFFSET_TABLE_ (GOT base) = start(.got.plt) but end(.got) !=
start(.got.plt)
This can have problems when _GLOBAL_OFFSET_TABLE_ is used as a symbol, e.g.
glibc dl_machine_dynamic assumes _GLOBAL_OFFSET_TABLE_ is start(.got.plt),
which is not true.
extern const ElfW(Addr) _GLOBAL_OFFSET_TABLE_[] attribute_hidden;
return _GLOBAL_OFFSET_TABLE_[0]; // R_X86_64_GOTPC32
In this patch, we
* Change all GOT*_FROM_END to GOTPLT* to fix the problem.
* Add HasGotPltOffRel to denote whether .got.plt should be kept even if
the section is empty.
* Simplify GotSection::empty and GotPltSection::empty by setting
HasGotOffRel and HasGotPltOffRel according to GlobalOffsetTable early.
The change of R_386_GOTPC makes X86::writePltHeader simpler as we don't
have to compute the offset start(.got.plt) - Ebx (it is constant 0).
We still diverge from ld.bfd (at least in most cases) and gold in that
.got.plt and .got are not adjacent, but the advantage doing that is
unclear.
Reviewers: ruiu, sivachandra, espindola
Subscribers: emaste, mehdi_amini, arichardson, dexonsmith, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59594
llvm-svn: 356968
Previously, `Entries` contains pairs of symbols and their indices.
The indices are always 0, x, 2x, 3x, ..., where x is the size of
relocation entry. We didn't have to store that values because we can
compute them when we consume them.
llvm-svn: 356812
There is a reproducible buildbot failure (segfault) on the 2 stage
clang-cmake-armv8-lld bot. Reverting while I investigate.
Differential Revision: https://reviews.llvm.org/D59216
llvm-svn: 356684
Instead of creating extra Synthetic .ARM.exidx sections to account for
gaps in the table, create a single .ARM.exidx SyntheticSection that can
derive the contents of the gaps from a sorted list of the executable
InputSections. This has the benefit of moving the ARM specific code for
SyntheticSections in SHF_LINK_ORDER processing and the table merging code
into the ARM specific SyntheticSection. This also makes it easier to create
EXIDX_CANTUNWIND table entries for executable InputSections that don't
have an associated .ARM.exidx section.
Fixes pr40277
Differential Revision: https://reviews.llvm.org/D59216
llvm-svn: 356666
Summary:
This implements Rui Ueyama's idea in PR39044.
I've checked that ld.bfd and gold do not have the power-of-2 requirement
and do not require sh_entsize to be a multiple of sh_align.
Now on the updated test merge-entsize.s, all the 3 linkers happily
create .rodata that is not 3-byte aligned.
This has a use case in Linux arch/x86/crypto/sha512-avx2-asm.S
It uses sh_entsize of 640, which is not a power of 2.
See https://github.com/ClangBuiltLinux/linux/issues/417
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: nickdesaulniers, E5ten, emaste, arichardson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59478
llvm-svn: 356428
This does not appear to be necessary because StringTableSection does not
need to be finalized, which also means that we can remove the call to
finalizeSynthetic on .dynstr.
Differential Revision: https://reviews.llvm.org/D59240
llvm-svn: 355977
We're going to need a separate VersionNeedSection for each partition, and
the partition data structure won't be templated.
With this the VersionTableSection class no longer needs ELFT, so detemplate it.
Differential Revision: https://reviews.llvm.org/D58808
llvm-svn: 355478
This lets us remove the special case from Writer::writeSections(), and also
fixes a bug where .eh_frame_hdr isn't necessarily written in the correct
order if a linker script moves .eh_frame and .eh_frame_hdr into the same
output section.
Differential Revision: https://reviews.llvm.org/D58795
llvm-svn: 355153
RelocationBaseSection is not used in -r links, so Config->Relocatable will
always be false.
Differential Revision: https://reviews.llvm.org/D58489
llvm-svn: 354607
The patch solves two tasks:
1. MIPS ABI allows to mix regular and microMIPS code and perform
cross-mode jumps. Linker needs to detect such cases and replace
jump/branch instructions by their cross-mode equivalents.
2. Other tools like dunamic linkers need to recognize cases when dynamic
table entries, e_entry field of an ELF header etc point to microMIPS
symbol. Linker should provide such information.
The first task is implemented in the `MIPS<ELFT>::relocateOne()` method.
New routine `fixupCrossModeJump` detects ISA mode change, checks and
replaces an instruction.
The main problem is how to recognize that relocation target is microMIPS
symbol. For absolute and section symbols compiler or assembler set the
less-significant bit of the symbol's value or sum of the symbol's value
and addend. And this bit signals to linker about microMIPS code. For
global symbols compiler cannot do the same trick because other tools like,
for example, disassembler wants to know an actual position of the symbol.
So compiler sets STO_MIPS_MICROMIPS flag in the `st_other` field.
In `MIPS<ELFT>::relocateOne()` method we have a symbol's value only and
cannot access any symbol's attributes. To pass type of the symbol
(regular/microMIPS) to that routine as well as other places where we
write a symbol value as-is (.dynamic section, `Elf_Ehdr::e_entry` field
etc) we set when necessary a less-significant bit in the `getSymVA`
function.
Differential revision: https://reviews.llvm.org/D40147
llvm-svn: 354311
On PowerPC64, it is necessary to keep the LocalEntry bits in st_other,
especially when -r is used. Otherwise, when the resulting object is used
in a posterior linking, LocalEntry info will be unavailable and
functions may be called through the wrong entrypoint.
Patch by Leandro Lupori.
Differential Revision: https://reviews.llvm.org/D56782
llvm-svn: 354184
Non-GOT non-PLT relocations to non-preemptible ifuncs result in the
creation of a canonical PLT, which now takes the identity of the IFUNC
in the symbol table. This (a) ensures address consistency inside and
outside the module, and (b) fixes a bug where some of these relocations
end up pointing to the resolver.
Fixes (at least) PR40474 and PR40501.
Differential Revision: https://reviews.llvm.org/D57371
llvm-svn: 353981
With the following changes:
1) Compilation fix:
std::atomic<bool> HasStaticTlsModel = false; ->
std::atomic<bool> HasStaticTlsModel{false};
2) Adjusted the comment in code.
Initial commit message:
DF_STATIC_TLS flag indicates that the shared object or executable
contains code using a static thread-local storage scheme.
Patch checks if IE/LE relocations were used to check if the code uses
a static model. If so it sets the DF_STATIC_TLS flag.
Differential revision: https://reviews.llvm.org/D57749
----
Modified : /lld/trunk/ELF/Arch/X86.cpp
Modified : /lld/trunk/ELF/Config.h
Modified : /lld/trunk/ELF/SyntheticSections.cpp
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model1.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model2.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model3.s
Added : /lld/trunk/test/ELF/Inputs/i386-static-tls-model4.s
Added : /lld/trunk/test/ELF/i386-static-tls-model.s
Modified : /lld/trunk/test/ELF/i386-tls-ie-shared.s
Modified : /lld/trunk/test/ELF/tls-dynamic-i686.s
Modified : /lld/trunk/test/ELF/tls-opt-iele-i686-nopic.s
llvm-svn: 353299
DF_STATIC_TLS flag indicates that the shared object or executable
contains code using a static thread-local storage scheme.
Patch checks if IE/LE relocations were used to check if the code uses
a static model. If so it sets the DF_STATIC_TLS flag.
Differential revision: https://reviews.llvm.org/D57749
llvm-svn: 353293
Previously we were setting it to the GotPlt output section, which is
incorrect on ARM where this section is in .got. In static binaries
this can lead to sh_info being set to -1 (because there is no .got.plt)
which results in various tools rejecting the output file.
Differential Revision: https://reviews.llvm.org/D57274
llvm-svn: 352413
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
When parsing CU ranges for gdb-index, handle the error (now propagated
up though the API lld is calling here - previously the error was
printed within the libDebugInfo API, not allowing lld to format or
handle the message at all) - including information about the object and
archive name, as well as failing the link.
llvm-svn: 349979
Summary:
For the 2-bit bloom filter, we currently pick the bits Hash%64 and Hash>>6%64 (Shift2=6), but bits [6:...] are also used to select a word, causing a loss of precision.
In this patch, we choose Shift2=26, with is suggested by Ambrose Feinstein.
Note, Shift2 is computed as maskbitslog2 in bfd/elflink.c and gold/dynobj.cc
It is varying with the number of dynamic symbols but we don't
necessarily copy its rule.
Reviewers: ruiu, espindola
Reviewed By: ruiu
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55971
llvm-svn: 349966
Summary:
This reinstates what I originally intended to do in D54361.
It removes the assumption that .debug_gnu_pubnames has increasing CuOffset.
Now we do better than gold here: when .debug_gnu_pubnames contains
multiple sets, gold would think every set has the same CU index as the
first set (incorrect).
Reviewed By: ruiu
Reviewers: ruiu, dblaikie, espindola
Subscribers: emaste, arichardson, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54483
llvm-svn: 347820
The DT_PLTRELSZ dynamic tag is calculated using the size of the
OutputSection containing the In.RelaPlt InputSection. This will work for the
default no linker script case and the majority of linker scripts.
Unfortunately it doesn't work for some 'almost' sensible linker scripts. It
is permitted by ELF to have a single OutputSection containing both
In.RelaDyn, In.RelaPlt and In.RelaIPlt. It is also permissible for the range
of memory [DT_RELA, DT_RELA + DT_RELASZ) and the range
[DT_JMPREL, DT_JMPREL + DT_JMPRELSZ) to overlap as long as the the latter
range is at the end.
To support this type of linker script use the specific InputSection sizes.
Fixes pr39678
Differential Revision: https://reviews.llvm.org/D54759
llvm-svn: 347736
This is https://bugs.llvm.org//show_bug.cgi?id=38978
Spec says that:
"Objects may be built with the -z nodefaultlib option to
suppress any search of the default locations at runtime.
Use of this option implies that all the dependencies of an
object can be located using its runpaths.
Without this option, which is the most common case, no
matter how you augment the runtime linker's library
search path, its last element is always /usr/lib for 32-bit
objects and /usr/lib/64 for 64-bit objects."
The patch implements this option.
Differential revision: https://reviews.llvm.org/D54577
llvm-svn: 347647
Igor Kudrin