Covers more of the behavior of rendezvous breakpoint handling and other
dynamic loader aspects, all on the 'enable log lldb dyld' log channel.
llvm-svn: 217283
This was primarily working around problems where we weren't able
to identify trap handlers for different environments -- but instead,
I'm working to make it easier to specify those trap handler function
names.
llvm-svn: 201366
They were enforcing 16-byte alignment on stack frames for Darwin x86 programs.
But we've found that trap handlers typically don't have the stack pointer
aligned correctly when a trap happens and lldb wasn't backtracing all
the way through. This method is only used as a safety guard to prevent
lldb's unwinder from using a bogus address as a stack frame - we'll still
enforce word-size alignment on stack frames so that should be fine.
Also rolled back akaylor's changes from August 2013 in r188952 which changed
the i386 ABI plugin to relax the CallFrameAddressIsValid offsets for non-Darwin
targets where only 4-byte alignment is enforced. Now Darwin is the same as
those environments.
<rdar://problem/15982682>
llvm-svn: 201292
Move some code that was in DynamicLoaderPOSIXDLYD into the
base class DynamicLoader. In the case of UpdateLoadedSections(),
the test to see whether a file is loadable (its address is zero)
is not generally applicable so that test is changed to a more
universally applicable check for the SHF_ALLOC flag on the section.
Also make it explicit that the reading of the module_id in
DynamicLoaderPOSIXDYLD::GetThreadLocalData() is using a hardcoded
size (of module_id) of 4, which might not be appropriate on
big-endian 64-bit systems, leaving a FIXME comment in place.
llvm-svn: 200939
<rdar://problem/15314403>
This patch adds a new lldb_private::SectionLoadHistory class that tracks what shared libraries were loaded given a process stop ID. This allows us to keep a history of the sections that were loaded for a time T. Many items in history objects will rely upon the process stop ID in the future.
llvm-svn: 196557
Fixed the test case for "test/functionalities/exec/TestExec.py" on Darwin.
The issue was breakpoints were persisting and causing problems. When we exec, we need to clear out the process and target and start fresh with nothing and let the breakpoints populate themselves again. This patch correctly clears out the breakpoints and also flushes the process so that the objects (process/thread/frame) give out valid information.
llvm-svn: 194106
pure virtual base class and made StackFrame a subclass of that. As
I started to build on top of that arrangement today, I found that it
wasn't working out like I intended. Instead I'll try sticking with
the single StackFrame class -- there's too much code duplication to
make a more complicated class hierarchy sensible I think.
llvm-svn: 193983
defines a protocol that all subclasses will implement. StackFrame
is currently the only subclass and the methods that Frame vends are
nearly identical to StackFrame's old methods.
Update all callers to use Frame*/Frame& instead of pointers to
StackFrames.
This is almost entirely a mechanical change that touches a lot of
the code base so I'm committing it alone. No new functionality is
added with this patch, no new subclasses of Frame exist yet.
I'll probably need to tweak some of the separation, possibly moving
some of StackFrame's methods up in to Frame, but this is a good
starting point.
<rdar://problem/15314068>
llvm-svn: 193907
To make this work this patch extends LLDB to:
- Explicitly track the link_map address for each module. This is effectively the module handle, not sure why it wasn't already being stored off anywhere. As an extension later, it would be nice if someone were to add support for printing this as part of the modules list.
- Allow reading the per-thread data pointer via ptrace. I have added support for Linux here. I'll be happy to add support for FreeBSD once this is reviewed. OS X does not appear to have __thread variables, so maybe we don't need it there. Windows support should eventually be workable along the same lines.
- Make DWARF expressions track which module they originated from.
- Add support for the DW_OP_GNU_push_tls_address DWARF opcode, as generated by gcc and recent versions of clang. Earlier versions of clang (such as 3.2, which is default on Ubuntu right now) do not generate TLS debug info correctly so can not be supported here.
- Understand the format of the pthread DTV block. This is where it gets tricky. We have three basic options here:
1) Call "dlinfo" or "__tls_get_addr" on the inferior and ask it directly. However this won't work on core dumps, and generally speaking it's not a good idea for the debugger to call functions itself, as it has the potential to not work depending on the state of the target.
2) Use libthread_db. This is what GDB does. However this option requires having a version of libthread_db on the host cross-compiled for each potential target. This places a large burden on the user, and would make it very hard to cross-debug from Windows to Linux, for example. Trying to build a library intended exclusively for one OS on a different one is not pleasant. GDB sidesteps the problem and asks the user to figure it out.
3) Parse the DTV structure ourselves. On initial inspection this seems to be a bad option, as the DTV structure (the format used by the runtime to manage TLS data) is not in fact a kernel data structure, it is implemented entirely in useerland in libc. Therefore the layout of it's fields are version and OS dependent, and are not standardized.
However, it turns out not to be such a problem. All OSes use basically the same algorithm (a per-module lookup table) as detailed in Ulrich Drepper's TLS ELF ABI document, so we can easily write code to decode it ourselves. The only question therefore is the exact field layouts required. Happily, the implementors of libpthread expose the structure of the DTV via metadata exported as symbols from the .so itself, designed exactly for this kind of thing. So this patch simply reads that metadata in, and re-implements libthread_db's algorithm itself. We thereby get cross-platform TLS lookup without either requiring third-party libraries, while still being independent of the version of libpthread being used.
Test case included.
llvm-svn: 192922
Added a way to set hardware breakpoints from the "breakpoint set" command with the new "--hardware" option. Hardware breakpoints are not a request, they currently are a requirement. So when breakpoints are specified as hardware breakpoints, they might fail to be set when they are able to be resolved and should be used sparingly. This is currently hooked up for GDB remote debugging.
Linux and FreeBSD should quickly enable this feature if possible, or return an error for any breakpoints that are hardware breakpoint sites in the "virtual Error Process::EnableBreakpointSite (BreakpointSite *bp_site);" function.
llvm-svn: 192491
1. existing breakpoints weren't being re-resolved after the sections of a library were loaded (ie. through dlopen).
2. loaded sections weren't being removed after a shared library had been unloaded.
llvm-svn: 190727
<rdar://problem/13594769>
Main changes in this patch include:
- cleanup plug-in interface and use ConstStrings for plug-in names
- Modfiied the BSD Archive plug-in to be able to pick out the correct .o file when .a files contain multiple .o files with the same name by using the timestamp
- Modified SymbolFileDWARFDebugMap to properly verify the timestamp on .o files it loads to ensure we don't load updated .o files and cause problems when debugging
The plug-in interface changes:
Modified the lldb_private::PluginInterface class that all plug-ins inherit from:
Changed:
virtual const char * GetPluginName() = 0;
To:
virtual ConstString GetPluginName() = 0;
Removed:
virtual const char * GetShortPluginName() = 0;
- Fixed up all plug-in to adhere to the new interface and to return lldb_private::ConstString values for the plug-in names.
- Fixed all plug-ins to return simple names with no prefixes. Some plug-ins had prefixes and most ones didn't, so now they all don't have prefixed names, just simple names like "linux", "gdb-remote", etc.
llvm-svn: 181631
Add the ability to give breakpoints a "kind" string, and have the StopInfoBreakpoint
print that in the brief description if set. Also print the kind - if set - in the breakpoint
listing.
Give kinds to a bunch of the internal breakpoints.
We were deleting the Mac OS X dynamic loader breakpoint as though the id we had stored away was
a breakpoint site ID, but in fact it was a breakpoint id, so we never actually deleted it. Fixed that.
llvm-svn: 173555
This commit does three things:
(a) introduces a new notification model for adding/removing/changing modules to a ModuleList, and applies it to the Target's ModuleList, so that we make sure to always trigger the right set of actions
whenever modules come and go in a target. Certain spots in the code still need to "manually" notify the Target for several reasons, so this is a work in progress
(b) adds a new capability to the Platforms: locating a scripting resources associated to a module. A scripting resource is a Python file that can load commands, formatters, ... and any other action
of interest corresponding to the loading of a module. At the moment, this is only implemented on Mac OS X and only for files inside .dSYM bundles - the next step is going to be letting
the frameworks themselves hold their scripting resources. Implementors of platforms for other systems are free to implement "the right thing" for their own worlds
(c) hooking up items (a) and (b) so that targets auto-load the scripting resources as the corresponding modules get loaded in a target. This has a few caveats at the moment:
- the user needs to manually add the .py file to the dSYM (soon, it will also work in the framework itself)
- if two modules with the same name show up during the lifetime of an LLDB session, the second one won't be able to load its scripting resource, but will otherwise work just fine
llvm-svn: 167569
Make breakpoint setting by file and line much more efficient by only looking for inlined breakpoint locations if we are setting a breakpoint in anything but a source implementation file. Implementing this complex for a many reasons. Turns out that parsing compile units lazily had some issues with respect to how we need to do things with DWARF in .o files. So the fixes in the checkin for this makes these changes:
- Add a new setting called "target.inline-breakpoint-strategy" which can be set to "never", "always", or "headers". "never" will never try and set any inlined breakpoints (fastest). "always" always looks for inlined breakpoint locations (slowest, but most accurate). "headers", which is the default setting, will only look for inlined breakpoint locations if the breakpoint is set in what are consudered to be header files, which is realy defined as "not in an implementation source file".
- modify the breakpoint setting by file and line to check the current "target.inline-breakpoint-strategy" setting and act accordingly
- Modify compile units to be able to get their language and other info lazily. This allows us to create compile units from the debug map and not have to fill all of the details in, and then lazily discover this information as we go on debuggging. This is needed to avoid parsing all .o files when setting breakpoints in implementation only files (no inlines). Otherwise we would need to parse the .o file, the object file (mach-o in our case) and the symbol file (DWARF in the object file) just to see what the compile unit was.
- modify the "SymbolFileDWARFDebugMap" to subclass lldb_private::Module so that the virtual "GetObjectFile()" and "GetSymbolVendor()" functions can be intercepted when the .o file contenst are later lazilly needed. Prior to this fix, when we first instantiated the "SymbolFileDWARFDebugMap" class, we would also make modules, object files and symbol files for every .o file in the debug map because we needed to fix up the sections in the .o files with information that is in the executable debug map. Now we lazily do this in the DebugMapModule::GetObjectFile()
Cleaned up header includes a bit as well.
llvm-svn: 162860
so that we don't break it with code changes.
After doing this I was able to fix the POSIX-DYLD plug-in so that it builds
after recent ModuleSpec changes.
llvm-svn: 151536
This patch combines common code from Linux and FreeBSD into
a new POSIX platform. It also contains fixes for 64bit FreeBSD.
The patch is based on changes by Mark Peek <mp@FreeBSD.org> and
"K. Macy" <kmacy@freebsd.org> in their github repo located at
https://github.com/fbsd/lldb.
llvm-svn: 147613
Todd Fiala