Some versions of the Visual C++ 2015 runtime have line tables with the
subsection kind of 0x800000F2. In cvinfo.h, 0x80000000 is documented to
be DEBUG_S_IGNORE. This appears to implement the intended behavior.
llvm-svn: 363724
This patch slightly refactors data structures internally used by the bottleneck
analysis to track data and resource dependencies.
This patch also updates methods used to print out information about dependency
edges when in debug mode.
This is the last of a sequence of commits done in preparation for an upcoming
patch that fixes PR37494. No functional change intended.
llvm-svn: 363677
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
Inter-block localization is the same as what currently happens, except now it
only runs on the entry block because that's where the problematic constants with
long live ranges come from.
The second phase is a new intra-block localization phase which attempts to
re-sink the already localized instructions further right before one of the
multiple uses.
One additional change is to also localize G_GLOBAL_VALUE as they're constants
too. However, on some targets like arm64 it takes multiple instructions to
materialize the value, so some additional heuristics with a TTI hook have been
introduced attempt to prevent code size regressions when localizing these.
Overall, these changes improve CTMark code size on arm64 by 1.2%.
Full code size results:
Program baseline new diff
------------------------------------------------------------------------------
test-suite...-typeset/consumer-typeset.test 1249984 1217216 -2.6%
test-suite...:: CTMark/ClamAV/clamscan.test 1264928 1232152 -2.6%
test-suite :: CTMark/SPASS/SPASS.test 1394092 1361316 -2.4%
test-suite...Mark/mafft/pairlocalalign.test 731320 714928 -2.2%
test-suite :: CTMark/lencod/lencod.test 1340592 1324200 -1.2%
test-suite :: CTMark/kimwitu++/kc.test 3853512 3820420 -0.9%
test-suite :: CTMark/Bullet/bullet.test 3406036 3389652 -0.5%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8017000 8016992 -0.0%
test-suite...TMark/7zip/7zip-benchmark.test 2856588 2856588 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 765704 765704 0.0%
Geomean difference -1.2%
Differential Revision: https://reviews.llvm.org/D63303
llvm-svn: 363632
Summary:
LoopRotate doesn't create a faithful clone of an instruction, it may
simplify it beforehand. Hence the clone of an instruction that has a
MemoryDef associated may not be a definition, but a use or not a memory
alternig instruction.
Don't rely on the template when the clone may be simplified.
Reviewers: george.burgess.iv
Subscribers: jlebar, Prazek, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D63355
llvm-svn: 363597
When considering a loop containing nontemporal stores or loads for
vectorization, suppress the vectorization if the corresponding
vectorized store or load with the aligment of the original scaler
memory op is not supported with the nontemporal hint on the target.
This adds two new functions:
bool isLegalNTStore(Type *DataType, unsigned Alignment) const;
bool isLegalNTLoad(Type *DataType, unsigned Alignment) const;
to TTI, leaving the target independent default implementation as
returning true, but with overriding implementations for X86 that
check the legality based on available Subtarget features.
This fixes https://llvm.org/PR40759
Differential Revision: https://reviews.llvm.org/D61764
llvm-svn: 363581
Use -fsave-optimization-record=<format> to specify a different format
than the default, which is YAML.
For now, only YAML is supported.
llvm-svn: 363573
Summary:
There is PHINode::getBasicBlockIndex() and PHINode::setIncomingValue()
but no function to replace incoming value for a specified BasicBlock*
predecessor.
Clearly, there are a lot of places that could use that functionality.
Reviewer: craig.topper, lebedev.ri, Meinersbur, kbarton, fhahn
Reviewed By: Meinersbur, fhahn
Subscribers: fhahn, hiraditya, zzheng, jsji, llvm-commits
Tag: LLVM
Differential Revision: https://reviews.llvm.org/D63338
llvm-svn: 363566
Should also be marked writeonly, but I think that would require
splitting the version with done set to a separate intrinsic
Test change is only from renumbering the attribute group numbers,
which for some reason the generated check lines consider.
llvm-svn: 363560
The HardwareLoops pass finds exit blocks with a scevable exit count.
If the target specifies to update the loop counter in a register,
through a phi, we need to ensure that the exit block is a latch so
that we can insert the phi with the correct value for the incoming
edge.
Differential Revision: https://reviews.llvm.org/D63336
llvm-svn: 363556
This patch tests the forward-referencing added in D62995 by changing
some existing intrinsics to use forward referencing of overloadable
parameters, rather than backward referencing.
This patch changes the TableGen definition/implementation of
llvm.aarch64.neon.ld2lane and llvm.aarch64.neon.ld2lane intrinsics
(and similar for ld3 and ld4). This change is intended to be
non-functional, since the behaviour of the intrinsics is
expected to be the same.
Reviewers: arsenm, dmgreen, RKSimon, greened, rnk
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D63189
llvm-svn: 363546
This patch changes MIR stack-id from an integer to an enum,
and adds printing/parsing support for this in MIR files. The default
stack-id '0' is now renamed to 'default'.
This should make MIR tests that have stack objects with different stack-ids
more descriptive. It also clarifies code operating on StackID.
Reviewers: arsenm, thegameg, qcolombet
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D60137
llvm-svn: 363533
Summary:
This allows target to implement custom emit of global variables if
required. See subsequent patch for a use case.
Change-Id: I9654197e3df24503104a54c41fff06845aed37fe
Reviewers: arsenm, kzhuravl
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61650
llvm-svn: 363519
Summary:
With Split DWARF the resulting object file (then called skeleton CU)
contains the file name of another ("DWO") file with the debug info.
This can be a problem for remote compilation, as it will contain the
name of the file on the compilation server, not on the client.
To use Split DWARF with remote compilation, one needs to either
* make sure only relative paths are used, and mirror the build directory
structure of the client on the server,
* inject the desired file name on the client directly.
Since llc already supports the latter solution, we're just copying that
over. We allow setting the actual output filename separately from the
value of the DW_AT_[GNU_]dwo_name attribute in the skeleton CU.
Fixes PR40276.
Reviewers: dblaikie, echristo, tejohnson
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D59673
llvm-svn: 363496
Summary:
When using ConstantExpr we often need the result of the expression to be kept in the AST. Currently this is done on a by the node that needs the result and has been done multiple times for enumerator, for constexpr variables... . This patch adds to ConstantExpr the ability to store the result of evaluating the expression. no functional changes expected.
Changes:
- Add trailling object to ConstantExpr that can hold an APValue or an uint64_t. the uint64_t is here because most ConstantExpr yield integral values so there is an optimized layout for integral values.
- Add basic* serialization support for the trailing result.
- Move conversion functions from an enum to a fltSemantics from clang::FloatingLiteral to llvm::APFloatBase. this change is to make it usable for serializing APValues.
- Add basic* Import support for the trailing result.
- ConstantExpr created in CheckConvertedConstantExpression now stores the result in the ConstantExpr Node.
- Adapt AST dump to print the result when present.
basic* : None, Indeterminate, Int, Float, FixedPoint, ComplexInt, ComplexFloat,
the result is not yet used anywhere but for -ast-dump.
Reviewers: rsmith, martong, shafik
Reviewed By: rsmith
Subscribers: rnkovacs, hiraditya, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D62399
llvm-svn: 363493
with 'objc_arc_inert'
Those calls are no-ops, so they can be safely deleted.
rdar://problem/49839633
Differential Revision: https://reviews.llvm.org/D62433
llvm-svn: 363468
There is a circular dependency between SROA and InferAddressSpaces
today that requires running both multiple times in order to be able to
eliminate all simple allocas and addrspacecasts. InferAddressSpaces
can't remove addrspacecasts when written to memory, and SROA helps
move pointers out of memory.
This should avoid inserting new commuting addrspacecasts with GEPs,
since there are unresolved questions about pointer wrapping between
different address spaces.
For now, don't replace volatile operations that don't match the alloca
addrspace, as it would change the address space of the access. It may
be still OK to insert an addrspacecast from the new alloca, but be
more conservative for now.
llvm-svn: 363462
The way SelectionDAG treats memory operands is very frustrating, and
by default drops them unless a property is set on the pattern. There
is no pattern for manually selected instructions, so this requires
manually setting them.
llvm-svn: 363455
This is a branch opcode that takes a jump table pointer, jump table index and an
index into the table to do an indirect branch.
We pass both the table pointer and JTI to allow targets like ARM64 to more
easily use the existing jump table compression optimization without having to
walk up the block to find a paired G_JUMP_TABLE.
Differential Revision: https://reviews.llvm.org/D63159
llvm-svn: 363434
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363415
Avoid producing illegal register bank copies for reg_sequence and
phi. The default implementation assumes it is possible to pick any
operand's bank and use that for the result, introducing a copy for
operands with a different bank. This does not check for illegal
copies. It is not legal to introduce a VGPR->SGPR copy, so any VGPR
operand requires the result to be a VGPR.
The changes in getInstrMappingImpl aren't strictly necessary, since
AMDGPU now just bypasses this for reg_sequence/phi. This could be
replaced with an assert in case other targets run into this. It is
currently responsible for producing the error for unsatisfiable
copies, but this will be better served with a verifier check.
For phis, for now assume any undetermined operands must be
VGPRs. Eventually, this needs to be able to defer mapping these
operations. This also does not yet have a way to check for whether the
block is in a divergent region.
llvm-svn: 363410
Summary:
The IntegerState, and its sepecialization BooleanState, can be used to
simplify the implementation of abstract attributes. The two abstract
state implementations provide storage and helpers to deal with bit-wise
encoded state.
Subscribers: hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60012
llvm-svn: 363407
Avoid a check for valid and a set of redundant asserts. The place
InstructionMapping is constructed asserts all of the default fields
are passed anyway for an invalid mapping, so don't overcomplicate
this.
llvm-svn: 363391
With this patch we get ability to set any flags we want
for implicit sections defined in YAML.
Differential revision: https://reviews.llvm.org/D63136
llvm-svn: 363367
Merging the two bits shrinks the context table from 16384 bytes to 8192 bytes.
Remove the ATTRIBUTE_BITS macro and just create an enum directly. Then fix the ATTR_max define to be 8192 to reflect the table size so we stop hardcoding it separately.
llvm-svn: 363330
* Add a common function to setup opt-remarks
* Rename common options to the same names
* Add error types to distinguish between file errors and regex errors
llvm-svn: 363328
Support loading code coverage data from regular archives, thin archives,
and from MachO universal binaries which contain archives.
Testing: check-llvm, check-profile (with {A,UB}San enabled)
rdar://51538999
Differential Revision: https://reviews.llvm.org/D63232
llvm-svn: 363325
notifyResolved/notifyEmitted.
The 'notify' prefix better describes what these methods do: they update the JIT
symbol states and notify any pending queries that the 'resolved' and 'emitted'
states have been reached (rather than actually performing the resolution or
emission themselves). Since new states are going to be introduced in the near
future (to track symbol registration/initialization) it's worth changing the
convention pre-emptively to avoid further confusion.
llvm-svn: 363322
Summary:
The logic in EarlyCSE that looks through 'not' operations in the
predicate recognizes e.g. that `select (not (cmp sgt X, Y)), X, Y` is
equivalent to `select (cmp sgt X, Y), Y, X`. Without this change,
however, only the latter is recognized as a form of `smin X, Y`, so the
two expressions receive different hash codes. This leads to missed
optimization opportunities when the quadratic probing for the two hashes
doesn't happen to collide, and assertion failures when probing doesn't
collide on insertion but does collide on a subsequent table grow
operation.
This change inverts the order of some of the pattern matching, checking
first for the optional `not` and then for the min/max/abs patterns, so
that e.g. both expressions above are recognized as a form of `smin X, Y`.
It also adds an assertion to isEqual verifying that it implies equal
hash codes; this fires when there's a collision during insertion, not
just grow, and so will make it easier to notice if these functions fall
out of sync again. A new flag --earlycse-debug-hash is added which can
be used when changing the hash function; it forces hash collisions so
that any pair of values inserted which compare as equal but hash
differently will be caught by the isEqual assertion.
Reviewers: spatel, nikic
Reviewed By: spatel, nikic
Subscribers: lebedev.ri, arsenm, craig.topper, efriedma, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62644
llvm-svn: 363274
This patch makes the LiveDebugValues pass consider fragments when propagating
DBG_VALUE insts between blocks, fixing PR41979. Fragment info for a variable
location is added to the open-ranges key, which allows distinct fragments to be
tracked separately. To handle overlapping fragments things become slightly
funkier. To avoid excessive searching for overlaps in the data-flow part of
LiveDebugValues, this patch:
* Pre-computes pairings of fragments that overlap, for each DILocalVariable
* During data-flow, whenever something happens that causes an open range to
be terminated (via erase), any fragments pre-determined to overlap are
also terminated.
The effect of which is that when encountering a DBG_VALUE fragment that
overlaps others, the overlapped fragments do not get propagated to other
blocks. We still rely on later location-list building to correctly handle
overlapping fragments within blocks.
It's unclear whether a mixture of DBG_VALUEs with and without fragmented
expressions are legitimate. To avoid suprises, this patch interprets a
DBG_VALUE with no fragment as overlapping any DBG_VALUE _with_ a fragment.
Differential Revision: https://reviews.llvm.org/D62904
llvm-svn: 363256
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
Extend the mechanism to overload intrinsic arguments by using either
backward or forward references to the overloadable arguments.
In for example:
def int_something : Intrinsic<[LLVMPointerToElt<0>],
[llvm_anyvector_ty], []>;
LLVMPointerToElt<0> is a forward reference to the overloadable operand
of type 'llvm_anyvector_ty' and would allow intrinsics such as:
declare i32* @llvm.something.v4i32(<4 x i32>);
declare i64* @llvm.something.v2i64(<2 x i64>);
where the result pointer type is deduced from the element type of the
first argument.
If the returned pointer is not a pointer to the element type, LLVM will
give an error:
Intrinsic has incorrect return type!
i64* (<4 x i32>)* @llvm.something.v4i32
Reviewers: RKSimon, arsenm, rnk, greened
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62995
llvm-svn: 363233
Summary:
This is useful for scenarios where Prologue was directly used and DWARF
5 awareness is required. The current alternative would be to either
duplicate the logic in getFileNameEntry, or to use getFileNameByIndex.
The latter isn't quite an in-place replacement - it performs some
processing, and it produces a string instead of a StringRef, meaning
the caller needs to handle its lifetime.
Reviewers: tamur, dblaikie, JDevlieghere
Reviewed By: tamur, JDevlieghere
Subscribers: aprantl, llvm-commits
Tags: #llvm, #debug-info
Differential Revision: https://reviews.llvm.org/D63228
llvm-svn: 363210
As discussed on D62910, we need to check whether particular types of memory access are allowed, not just their alignment/address-space.
This NFC patch adds a MachineMemOperand::Flags argument to allowsMemoryAccess and allowsMisalignedMemoryAccesses, and wires up calls to pass the relevant flags to them.
If people are happy with this approach I can then update X86TargetLowering::allowsMisalignedMemoryAccesses to handle misaligned NT load/stores.
Differential Revision: https://reviews.llvm.org/D63075
llvm-svn: 363179
This was using its own, outdated list of possible captures. This was
at minimum not catching cmpxchg and addrspacecast captures.
One change is now any volatile access is treated as capturing. The
test coverage for this pass is quite inadequate, but this required
removing volatile in the lifetime capture test.
Also fixes some infrastructure issues to allow running just the IR
pass.
Fixes bug 42238.
llvm-svn: 363169
This case is slightly tricky, because loop distribution should be
allowed in some cases, and not others. As long as runtime dependency
checks don't need to be introduced, this should be OK. This is further
complicated by the fact that LoopDistribute partially ignores if LAA
says that vectorization is safe, and then does its own runtime pointer
legality checks.
Note this pass still does not handle noduplicate correctly, as this
should always be forbidden with it. I'm not going to bother trying to
fix it, as it would require more effort and I think noduplicate should
be removed.
https://reviews.llvm.org/D62607
llvm-svn: 363160
'Use wrap flags in InsertBinop' (rL362687) was reverted due to
miscompiles. This patch introduces the previous change to pass
no-wrap flags but now only FlagAnyWrap is passed.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 363147
r363016 let lld-link and llvm-lib share the /machine: parsing code.
This lets llvm-cvtres share it as well.
Making llvm-cvtres depend on llvm-lib seemed a bit strange (it doesn't
need llvm-lib's dependencies on BinaryFormat and BitReader) and I
couldn't find a good place to put this code. Since it's just a few
lines, put it in lib/Object for now.
Differential Revision: https://reviews.llvm.org/D63120
llvm-svn: 363144
Dependent libraries support for the legacy api was committed in a
broken state (see: https://reviews.llvm.org/D60274). This was missed
due to the painful nature of having to integrate the changes into a
linker in order to test. This change implements support for dependent
libraries in the legacy LTO api:
- I have removed the current api function, which returns a single
string, and added functions to access each dependent library
specifier individually.
- To reduce the testing pain, I have made the api functions as thin as
possible to maximize coverage from llvm-lto.
- When doing ThinLTO the system linker will load the modules lazily
when scanning the input files. Unfortunately, when modules are
lazily loaded there is no access to module level named metadata. To
fix this I have added api functions that allow querying the IRSymtab
for the dependent libraries. I hope to expand the api in the future
so that, eventually, all the information needed by a client linker
during scan can be retrieved from the IRSymtab.
Differential Revision: https://reviews.llvm.org/D62935
llvm-svn: 363140
We have the related getSplatValue() already in IR (see code just above the proposed addition).
But sometimes we only need to know that the value is a splat rather than capture the splatted
scalar value. Also, we have an isSplatValue() function already in SDAG.
Motivation - recent bugs that would potentially benefit from improved splat analysis in IR:
https://bugs.llvm.org/show_bug.cgi?id=37428https://bugs.llvm.org/show_bug.cgi?id=42174
Differential Revision: https://reviews.llvm.org/D63138
llvm-svn: 363106
This opcode generates a pointer to the address of the jump table
specified by the source operand, which is a jump table index.
It will be used in conjunction with an upcoming G_BRJT opcode to support
jump table codegen with GlobalISel.
Differential Revision: https://reviews.llvm.org/D63111
llvm-svn: 363096
Implement necessary target hooks to enable MachinePipeliner for P9 only.
The pass is off by default, can be enabled with -ppc-enable-pipeliner for P9.
Differential Revision: https://reviews.llvm.org/D62164
llvm-svn: 363085
For lld, pass in Config->Timestamp (which is set based on lld's
/timestamp: and /Brepro flags). Since the writeWindowsResourceCOFF()
data is only used in-memory by LLD and the obj's timestamp isn't used
for anything in the output, this doesn't change behavior.
For llvm-cvtres, add an optional /timestamp: parameter, and use the
current behavior of calling time() if the parameter is not passed in.
This doesn't really change observable behavior (unless someone passes
/timestamp: to llvm-cvtres, which wasn't possible before), but it
removes the last unqualified call to time() from llvm/lib, which seems
like a good thing.
Differential Revision: https://reviews.llvm.org/D63116
llvm-svn: 363050
As suggested by @arsenm on D63075 - this adds a TargetLowering::allowsMemoryAccess wrapper that takes a Load/Store node's MachineMemOperand to handle the AddressSpace/Alignment arguments and will also implicitly handle the MachineMemOperand::Flags change in D63075.
llvm-svn: 363048
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need a new
addressing mode.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 363039
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
This reverts r362990 (git commit 374571301d)
This was causing linker warnings on Darwin:
ld: warning: direct access in function 'llvm::initializeEvexToVexInstPassPass(llvm::PassRegistry&)'
from file '../../lib/libLLVMX86CodeGen.a(X86EvexToVex.cpp.o)' to global weak symbol
'void std::__1::__call_once_proxy<std::__1::tuple<void* (&)(llvm::PassRegistry&),
std::__1::reference_wrapper<llvm::PassRegistry>&&> >(void*)' from file '../../lib/libLLVMCore.a(Verifier.cpp.o)'
means the weak symbol cannot be overridden at runtime. This was likely caused by different translation
units being compiled with different visibility settings.
llvm-svn: 363028
This makes the interface simpler and more consistent with the interface for
.dSYM files and fixes a bug where llvm-symbolizer would not read the dwp if
it was asked to symbolize data before symbolizing code.
Differential Revision: https://reviews.llvm.org/D63114
llvm-svn: 363025
And share some code with lld-link.
While here, also add a FIXME about PR42180 and merge r360150 to llvm-lib.
Differential Revision: https://reviews.llvm.org/D63021
llvm-svn: 363016
Summary:
For builds with LLVM_BUILD_LLVM_DYLIB=ON and BUILD_SHARED_LIBS=OFF
this change makes all symbols in the target specific libraries hidden
by default.
A new macro called LLVM_EXTERNAL_VISIBILITY has been added to mark symbols in these
libraries public, which is mainly needed for the definitions of the
LLVMInitialize* functions.
This patch reduces the number of public symbols in libLLVM.so by about
25%. This should improve load times for the dynamic library and also
make abi checker tools, like abidiff require less memory when analyzing
libLLVM.so
One side-effect of this change is that for builds with
LLVM_BUILD_LLVM_DYLIB=ON and LLVM_LINK_LLVM_DYLIB=ON some unittests that
access symbols that are no longer public will need to be statically linked.
Before and after public symbol counts (using gcc 8.2.1, ld.bfd 2.31.1):
nm before/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
36221
nm after/libLLVM-9svn.so | grep ' [A-Zuvw] ' | wc -l
26278
Reviewers: chandlerc, beanz, mgorny, rnk, hans
Reviewed By: rnk, hans
Subscribers: Jim, hiraditya, michaelplatings, chapuni, jholewinski, arsenm, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, nhaehnle, javed.absar, sbc100, jgravelle-google, aheejin, kbarton, fedor.sergeev, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, zzheng, edward-jones, mgrang, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, kristina, jsji, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D54439
llvm-svn: 362990
The ELF gABI requires the tag values of DT_REL, DT_RELA and DT_JMPREL to be
treated as virtual addresses. They were treated as offsets. Fixes PR41832.
Differential Revision: https://reviews.llvm.org/D62972
llvm-svn: 362969
These caused a build failure because I managed not to notice they
depended on a later unpushed commit in my current stack. Sorry about
that.
llvm-svn: 362956
This adds support for the new family of conditional selection /
increment / negation instructions; the low-overhead branch
instructions (e.g. BF, WLS, DLS); the CLRM instruction to zero a whole
list of registers at once; the new VMRS/VMSR and VLDR/VSTR
instructions to get data in and out of 8.1-M system registers,
particularly including the new VPR register used by MVE vector
predication.
To support this, we also add a register name 'zr' (used by the CSEL
family to force one of the inputs to the constant 0), and operand
types for lists of registers that are also allowed to include APSR or
VPR (used by CLRM). The VLDR/VSTR instructions also need some new
addressing modes.
The low-overhead branch instructions exist in their own separate
architecture extension, which we treat as enabled by default, but you
can say -mattr=-lob or equivalent to turn it off.
Reviewers: dmgreen, samparker, SjoerdMeijer, t.p.northover
Reviewed By: samparker
Subscribers: miyuki, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62667
llvm-svn: 362953
This is a follow-up for D62809.
Content and Size fields should be optional as was discussed in comments
of the D62809's thread. With that, we can describe a specific string table and
symbol table sections in a more correct way and also show appropriate errors.
The patch adds lots of test cases where the behavior is described in details.
Differential revision: https://reviews.llvm.org/D62957
llvm-svn: 362931
This patch aims to reduce spilling and register moves by using the 3-address
versions of instructions per default instead of the 2-address equivalent
ones. It seems that both spilling and register moves are improved noticeably
generally.
Regalloc hints are passed to increase conversions to 2-address instructions
which are done in SystemZShortenInst.cpp (after regalloc).
Since the SystemZ reg/mem instructions are 2-address (dst and lhs regs are
the same), foldMemoryOperandImpl() can no longer trivially fold a spilled
source register since the reg/reg instruction is now 3-address. In order to
remedy this, new 3-address pseudo memory instructions are used to perform the
folding only when the dst and lhs virtual registers are known to be allocated
to the same physreg. In order to not let MachineCopyPropagation run and
change registers on these transformed instructions (making it 3-address), a
new target pass called SystemZPostRewrite.cpp is run just after
VirtRegRewriter, that immediately lowers the pseudo to a target instruction.
If it would have been possibe to insert a COPY instruction and change a
register operand (convert to 2-address) in foldMemoryOperandImpl() while
trusting that the caller (e.g. InlineSpiller) would update/repair the
involved LiveIntervals, the solution involving pseudo instructions would not
have been needed. This is perhaps a potential improvement (see Phabricator
post).
Common code changes:
* A new hook TargetPassConfig::addPostRewrite() is utilized to be able to run a
target pass immediately before MachineCopyPropagation.
* VirtRegMap is passed as an argument to foldMemoryOperand().
Review: Ulrich Weigand, Quentin Colombet
https://reviews.llvm.org/D60888
llvm-svn: 362868
In order for GlobalISel to re-use the significant amount of analysis and
optimization code in SDAG's switch lowering, we first have to extract it and
create an interface to be used by both frameworks.
No test changes as it's NFC.
Differential Revision: https://reviews.llvm.org/D62745
llvm-svn: 362857
Summary:
When handling exports from the command line or from .def files, the
linker does a "fuzzy" string lookup to allow finding mangled symbols.
However, when the symbol is re-exported under a new name, the linker has
to transfer the decorations from the exported symbol over to the new
name. This is implemented by taking the mangled symbol that was found in
the object and replacing the original symbol name with the export name.
Before this patch, LLD implemented the fuzzy search by adding an
undefined symbol with the unmangled name, and then during symbol
resolution, checking if similar mangled symbols had been added after the
last round of symbol resolution. If so, LLD makes the original symbol a
weak alias of the mangled symbol. Later, to get the original symbol
name, LLD would look through the weak alias and forward it on to the
import library writer, which copies the symbol decorations. This
approach doesn't work when bar is itself a weak alias, as is the case in
asan. It's especially bad when the aliasee of bar contains the string
"bar", consider "bar_default". In this case, we would end up exporting
the symbol "foo_default" when we should've exported just "foo".
To fix this, don't look through weak aliases to find the mangled name.
Save the mangled name earlier during fuzzy symbol lookup.
Fixes PR42074
Reviewers: mstorsjo, ruiu
Subscribers: thakis, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62984
llvm-svn: 362849
rather than two callbacks.
The asynchronous lookup API (which the synchronous lookup API wraps for
convenience) used to take two callbacks: OnResolved (called once all requested
symbols had an address assigned) and OnReady to be called once all requested
symbols were safe to access). This patch updates the asynchronous lookup API to
take a single 'OnComplete' callback and a required state (SymbolState) to
determine when the callback should be made. This simplifies the common use case
(where the client is interested in a specific state) and will generalize neatly
as new states are introduced to track runtime initialization of symbols.
Clients who were making use of both callbacks in a single query will now need to
issue two queries (one for SymbolState::Resolved and another for
SymbolState::Ready). Synchronous lookup API clients who were explicitly passing
the WaitOnReady argument will now need neeed to pass a SymbolState instead (for
'WaitOnReady == true' use SymbolState::Ready, for 'WaitOnReady == false' use
SymbolState::Resolved). Synchronous lookup API clients who were using default
arugment values should see no change.
llvm-svn: 362832
This implements the functionality described in
https://lld.llvm.org/Partitions.html. It works as follows:
- Reads the section headers using the ELF header at file offset 0;
- If extracting a loadable partition:
- Finds the section containing the required partition ELF header by looking it up in the section table;
- Reads the ELF and program headers from the section.
- If extracting the main partition:
- Reads the ELF and program headers from file offset 0.
- Filters the section table according to which sections are in the program headers that it read:
- If ParentSegment != nullptr or section is not SHF_ALLOC, then it goes in.
- Sections containing partition ELF headers or program headers are excluded as there are no headers for these in ordinary ELF files.
Differential Revision: https://reviews.llvm.org/D62364
llvm-svn: 362818
Patch which introduces a target-independent framework for generating
hardware loops at the IR level. Most of the code has been taken from
PowerPC CTRLoops and PowerPC has been ported over to use this generic
pass. The target dependent parts have been moved into
TargetTransformInfo, via isHardwareLoopProfitable, with
HardwareLoopInfo introduced to transfer information from the backend.
Three generic intrinsics have been introduced:
- void @llvm.set_loop_iterations
Takes as a single operand, the number of iterations to be executed.
- i1 @llvm.loop_decrement(anyint)
Takes the maximum number of elements processed in an iteration of
the loop body and subtracts this from the total count. Returns
false when the loop should exit.
- anyint @llvm.loop_decrement_reg(anyint, anyint)
Takes the number of elements remaining to be processed as well as
the maximum numbe of elements processed in an iteration of the loop
body. Returns the updated number of elements remaining.
llvm-svn: 362774
A function for loop vectorization illegality reporting has been
introduced:
void LoopVectorizationLegality::reportVectorizationFailure(
const StringRef DebugMsg, const StringRef OREMsg,
const StringRef ORETag, Instruction * const I) const;
The function prints a debug message when the debug for the compilation
unit is enabled as well as invokes the optimization report emitter to
generate a message with a specified tag. The function doesn't cover any
complicated logic when a custom lambda should be passed to the emitter,
only generating a message with a tag is supported.
The function always prints the instruction `I` after the debug message
whenever the instruction is specified, otherwise the debug message
ends with a dot: 'LV: Not vectorizing: Disabled/already vectorized.'
Patch by Pavel Samolysov <samolisov@gmail.com>
llvm-svn: 362736
Summary:
(1) Function descriptor on AIX
On AIX, a called routine may have 2 distinct symbols associated with it:
* A function descriptor (Name)
* A function entry point (.Name)
The descriptor structure on AIX is the same as those in the ELF V1 ABI:
* The address of the entry point of the function.
* The TOC base address for the function.
* The environment pointer.
The descriptor symbol uses the same name as the source level function in C.
The function entry point is analogous to the symbol we would generate for a
function in a non-descriptor-based ABI, except that it is renamed by
prepending a ".".
Which symbol gets referenced depends on the context:
* Taking the address of the function references the descriptor symbol.
* Calling the function references the entry point symbol.
(2) Speaking of implementation on AIX, for direct function call target, we
create proper MCSymbol SDNode(e.g . ".foo") while constructing SDAG to
replace original TargetGlobalAddress SDNode. Then down the path, we can
take advantage of this MCSymbol.
Patch by: Xiangling_L
Reviewed by: sfertile, hubert.reinterpretcast, jasonliu, syzaara
Differential Revision: https://reviews.llvm.org/D62532
llvm-svn: 362735
Summary:
This patch is part of a patch series to add support for FileCheck
numeric expressions. This specific patch introduces support for defining
numeric variable in a CHECK directive.
This commit introduces support for defining numeric variable from a
litteral value in the input text. Numeric expressions can then use the
variable provided it is on a later line.
Copyright:
- Linaro (changes up to diff 183612 of revision D55940)
- GraphCore (changes in later versions of revision D55940 and
in new revision created off D55940)
Reviewers: jhenderson, chandlerc, jdenny, probinson, grimar, arichardson, rnk
Subscribers: hiraditya, llvm-commits, probinson, dblaikie, grimar, arichardson, tra, rnk, kristina, hfinkel, rogfer01, JonChesterfield
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60386
llvm-svn: 362705
If the given SCEVExpr has no (un)signed flags attached to it, transfer
these to the resulting instruction or use them to find an existing
instruction.
Differential Revision: https://reviews.llvm.org/D61934
llvm-svn: 362687
The ISD::STRICT_ nodes used to implement the constrained floating-point
intrinsics are currently never passed to the target back-end, which makes
it impossible to handle them correctly (e.g. mark instructions are depending
on a floating-point status and control register, or mark instructions as
possibly trapping).
This patch allows the target to use setOperationAction to switch the action
on ISD::STRICT_ nodes to Legal. If this is done, the SelectionDAG common code
will stop converting the STRICT nodes to regular floating-point nodes, but
instead pass the STRICT nodes to the target using normal SelectionDAG
matching rules.
To avoid having the back-end duplicate all the floating-point instruction
patterns to handle both strict and non-strict variants, we make the MI
codegen explicitly aware of the floating-point exceptions by introducing
two new concepts:
- A new MCID flag "mayRaiseFPException" that the target should set on any
instruction that possibly can raise FP exception according to the
architecture definition.
- A new MI flag FPExcept that CodeGen/SelectionDAG will set on any MI
instruction resulting from expansion of any constrained FP intrinsic.
Any MI instruction that is *both* marked as mayRaiseFPException *and*
FPExcept then needs to be considered as raising exceptions by MI-level
codegen (e.g. scheduling).
Setting those two new flags is straightforward. The mayRaiseFPException
flag is simply set via TableGen by marking all relevant instruction
patterns in the .td files.
The FPExcept flag is set in SDNodeFlags when creating the STRICT_ nodes
in the SelectionDAG, and gets inherited in the MachineSDNode nodes created
from it during instruction selection. The flag is then transfered to an
MIFlag when creating the MI from the MachineSDNode. This is handled just
like fast-math flags like no-nans are handled today.
This patch includes both common code changes required to implement the
new features, and the SystemZ implementation.
Reviewed By: andrew.w.kaylor
Differential Revision: https://reviews.llvm.org/D55506
llvm-svn: 362663
Summary:
This change only unifies the API previous API pair accepting
CallInst and InvokeInst, thus making it easier to refactor
inliner pass ode to CallBase. The implementation of the unified
API still relies on the CallSite implementation.
Reviewers: eraman, chandlerc, jdoerfert
Reviewed By: jdoerfert
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62283
llvm-svn: 362656
Most parts of LLVM don't care whether the byval type is derived from an
explicit Attribute or from the parameter's pointee type, so it makes
sense for the main access function to just return the right value.
The very few users who do care (only BitcodeReader so far) can find out
how it's specified by accessing the Attribute directly.
llvm-svn: 362642
Instead of passing around fast-math-flags as a parameter, we can set those
using an IRBuilder guard object. This is no-functional-change-intended.
The motivation is to eventually fix the vectorizers to use and set the
correct fast-math-flags for reductions. Examples of that not behaving as
expected are:
https://bugs.llvm.org/show_bug.cgi?id=23116 (should be able to reduce with less than 'fast')
https://bugs.llvm.org/show_bug.cgi?id=35538 (possible miscompile for -0.0)
D61802 (should be able to reduce with IR-level FMF)
Differential Revision: https://reviews.llvm.org/D62272
llvm-svn: 362612
This is the LLVM part of this change, the Clang part contains the full
description in its commit message.
Differential Revision: https://reviews.llvm.org/D60697
llvm-svn: 362600
NOTE: Note that no attributes are derived yet. This patch will not go in
alone but only with others that derive attributes. The framework is
split for review purposes.
This commit introduces the Attributor pass infrastructure and fixpoint
iteration framework. Further patches will introduce abstract attributes
into this framework.
In a nutshell, the Attributor will update instances of abstract
arguments until a fixpoint, or a "timeout", is reached. Communication
between the Attributor and the abstract attributes that are derived is
restricted to the AbstractState and AbstractAttribute interfaces.
Please see the file comment in Attributor.h for detailed information
including design decisions and typical use case. Also consider the class
documentation for Attributor, AbstractState, and AbstractAttribute.
Reviewers: chandlerc, homerdin, hfinkel, fedor.sergeev, sanjoy, spatel, nlopes, nicholas, reames
Subscribers: mehdi_amini, mgorny, hiraditya, bollu, steven_wu, dexonsmith, dang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59918
llvm-svn: 362578
In glibc, DT_PPC_GOT indicates that PowerPC32 Secure PLT ABI is used.
I plan to use it in D62464.
DT_PPC_OPT currently indicates if a TLSDESC inspired TLS optimization is
enabled.
Reviewed By: grimar, jhenderson, rupprecht
Differential Revision: https://reviews.llvm.org/D62851
llvm-svn: 362569
Summary:
This was flagged in https://www.viva64.com/en/b/0629/ under "Snippet No.
38".
Add an assertion, since it's unlikely that this parameter is nullptr.
Reviewers: RKSimon, fhahn
Reviewed By: RKSimon
Subscribers: fhahn, llvm-commits, RKSimon, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62229
llvm-svn: 362567
This patch allows current users of Value::stripPointerCasts() to force
the result of the function to have the same representation as the value
it was called on. This is useful in various cases, e.g., (non-)null
checks.
In this patch only a single call site was adjusted to fix an existing
misuse that would cause nonnull where they may be wrong. Uses in
attribute deduction and other areas, e.g., D60047, are to be expected.
For a discussion on this topic, please see [0].
[0] http://lists.llvm.org/pipermail/llvm-dev/2018-December/128423.html
Reviewers: hfinkel, arsenm, reames
Subscribers: wdng, hiraditya, bollu, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61607
llvm-svn: 362545
Summary:
Following the cleanup in D48202, method foldBlockIntoPredecessor has the
same behavior. Replace its uses with MergeBlockIntoPredecessor.
Remove foldBlockIntoPredecessor.
Reviewers: chandlerc, dmgreen
Subscribers: jlebar, javed.absar, zzheng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62751
llvm-svn: 362538
The proposal in D62498 showed that x86 would benefit from vector
store splitting, but that may conflict with the generic DAG
combiner's store merging transforms.
Add memory type to the existing TLI hook that enables the merging
transforms, so we can limit those changes to scalars only for x86.
llvm-svn: 362507
This matches APInt's versions of these functions, and there is no need for these to be size_t.
(as well as __builtin_clzll())
Differential Revision: https://reviews.llvm.org/D60823
llvm-svn: 362503
ELF for the 64-bit Arm Architecture defines two processor-specific dynamic
tags:
DT_AARCH64_BTI_PLT 0x70000001, d_val
DT_AARCH64_PAC_PLT 0x70000003, d_val
These presence of these tags indicate that PLT sequences have been
protected using Branch Target Identification and Pointer Authentication
respectively. The presence of both indicates that the PLT sequences have
been protected with both Branch Target Identification and Pointer
Authentication.
This patch adds the tags and tests for llvm-readobj and yaml2obj.
As some of the processor specific dynamic tags overlap, this patch splits
them up, keeping their original default value if they were not previously
mentioned explicitly in a switch case.
Differential Revision: https://reviews.llvm.org/D62596
llvm-svn: 362493
ELF for the 64-bit Arm Architecture defines a processor specific property
type GNU_PROPERTY_AARCH64_FEATURE_1_AND as GNU_PROPERTY_LOPROC. This
property works in a similar way to the existing X86 processor specific
property GNU_PROPERTY_GNU_X86_FEATURE_1_AND.
Two feature bits are defined for GNU_PROPERTY_AARCH64_FEATURE_1_AND:
- GNU_PROPERTY_AARCH64_FEATURE_1_BTI 0x1
- GNU_PROPERTY_AARCH64_FEATURE_1_PAC 0x2
This patch defines the property, feature bits and implements support for
printing in llvm-readobj.
Differential Revision: https://reviews.llvm.org/D62595
llvm-svn: 362490
Includes a fix for an introduced build failure due to a post c++11 use of std::mismatch.
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362484
While prof branch_weights inconsistencies are being fixed patch
by patch (pass by pass) we need SwitchInstProfUpdateWrapper to
be safe with respect to inconsistent metadata that can come from
passes that have not been fixed yet. See the bug found by @nikic
in https://reviews.llvm.org/D62126.
This patch introduces one more state (called Invalid) to the
wrapper class that allows users to work with the underlying
SwitchInst ignoring the prof metadata changes.
Created a unit test for the SwitchInstProfUpdateWrapper class.
Reviewers: davidx, nikic, eraman, reames, chandlerc
Reviewed By: davidx
Differential Revision: https://reviews.llvm.org/D62656
llvm-svn: 362473
For some reason multiple places need to do this, and the variant the
loop unroller and inliner use was not handling it.
Also, introduce a new wrapper to be slightly more precise, since on
AMDGPU some addrspacecasts are free, but not no-ops.
llvm-svn: 362436
The implementation is conceptually simple: We separate the LHS and
RHS into positive and negative components and then also compute the
positive and negative components of the result, taking into account
that e.g. only pos/pos and neg/neg will give a positive result.
However, there's one significant complication: SignedMin / -1 is UB
for sdiv, and we can't just ignore it, because the APInt result of
SignedMin would break the sign segregation. Instead we drop SignedMin
or -1 from the corresponding ranges, taking into account some edge
cases with wrapped ranges.
Because of the sign segregation, the implementation ends up being
nearly fully precise even for wrapped ranges (the remaining
imprecision is due to ranges that are both signed and unsigned
wrapping and are divided by a trivial divisor like 1). This means
that the testing cannot just check the signed envelope as we
usually do. Instead we collect all possible results in a bitvector
and construct a better sign wrapped range (than the full envelope).
Differential Revision: https://reviews.llvm.org/D61238
llvm-svn: 362430
Summary:
- Fixes inline call frame line table display in windbg.
- Improve llvm-pdbutil to dump extra file ids.
- Warn on unknown subsections so we don't have this kind of bug in the
future.
Reviewers: inglorion, akhuang, aganea
Subscribers: eraman, zturner, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62701
llvm-svn: 362429
This reverts commit r362407. It broke compilation of
llvm/lib/Object/ArchiveWriter.cpp:
error: type 'llvm::sys::path::const_iterator' does not provide a call
operator
llvm-svn: 362413
This fixes some thin archive relative path issues, paths are shortened where possible and paths are output correctly when using the display table command.
Differential Revision: https://reviews.llvm.org/D59491
llvm-svn: 362407
Add (opt-in) support for implicit truncation to isConstOrConstSplat, which allows us to match truncated 'all ones' cases in isBitwiseNot.
PR41020 compares against using ISD::isBuildVectorAllOnes() instead, but that predicate silently accepts any UNDEF elements in the build vector which might not be what we want in isBitwiseNot - so I've added an opt-in 'AllowUndefs' flag that is set to false by default but will allow us to enable it on individual cases where its safe.
Differential Revision: https://reviews.llvm.org/D62783
llvm-svn: 362323
This allows the DWARFExpression class to handle addresses without
crashing on targets with 16-bit pointers like AVR.
This is required in order to generate assembly from clang via the '-S'
flag.
This fixes an error with the following message:
clang: llvm/include/llvm/DebugInfo/DWARF/DWARFExpression.h:132: llvm::DWARFExpression::DWARFExpression(llvm::DataExtractor, uint16_t, uint8_t):
Assertion `AddressSize == 8 || AddressSize == 4' failed.
llvm-svn: 362290
CodeView has its own register map which is defined in cvconst.h. Missing this
mapping before saving register to CodeView causes debugger to show incorrect
value for all register based variables, like variables in register and local
variables addressed by register (stack pointer + offset).
This change added mapping between LLVM register and CodeView register so the
correct register number will be stored to CodeView/PDB, it aso fixed the
mapping from CodeView register number to register name based on current
CPUType but print PDB to yaml still assumes X86 CPU and needs to be fixed.
Differential Revision: https://reviews.llvm.org/D62608
llvm-svn: 362280
When the object size argument is -1, no checking can be done, so calling the
_chk variant is unnecessary. We already did this for a bunch of these
functions.
rdar://50797197
Differential revision: https://reviews.llvm.org/D62358
llvm-svn: 362272
In PPCReduceCRLogicals after splitting the original MBB into 2, the 2 impacted branches still use original branch probability. This is unreasonable. Suppose we have following code, and the probability of each successor is 50%.
condc = conda || condb
br condc, label %target, label %fallthrough
It can be transformed to following,
br conda, label %target, label %newbb
newbb:
br condb, label %target, label %fallthrough
Since each branch has a probability of 50% to each successor, the total probability to %fallthrough is 25% now, and the total probability to %target is 75%. This actually changed the original profiling data. A more reasonable probability can be set to 70% to the false side for each branch instruction, so the total probability to %fallthrough is close to 50%.
This patch assumes the branch target with two incoming edges have same edge frequency and computes new probability fore each target, and keep the total probability to original targets unchanged.
Differential Revision: https://reviews.llvm.org/D62430
llvm-svn: 362237
Separate the remark serialization to YAML from the LLVM Diagnostics.
This adds a new serialization abstraction: remarks::Serializer. It's
completely independent from lib/IR and it provides an easy way to
replace YAML by providing a new remarks::Serializer.
Differential Revision: https://reviews.llvm.org/D62632
llvm-svn: 362160
When we switch to opaque pointer types we will need some way to describe
how many bytes a 'byval' parameter should occupy on the stack. This adds
a (for now) optional extra type parameter.
If present, the type must match the pointee type of the argument.
The original commit did not remap byval types when linking modules, which broke
LTO. This version fixes that.
Note to front-end maintainers: if this causes test failures, it's probably
because the "byval" attribute is printed after attributes without any parameter
after this change.
llvm-svn: 362128
This adds:
- LLVM subtarget features to make all the new instructions conditional on,
- CPU and FPU names for use on clang's command line, with default FPUs set
so that "armv8.1-m.main+fp" and "armv8.1-m.main+fp.dp" will select the right
FPU features,
- architecture extension names "mve" and "mve.fp",
- ABI build attribute support for v8.1-M (a new value for Tag_CPU_arch) and MVE
(a new actual tag).
Patch mostly by Simon Tatham.
Differential Revision: https://reviews.llvm.org/D60698
llvm-svn: 362090
This ports and improves on some existing llvm-readobj -codeview dumping
functionality that llvm-pdbutil lacked.
Helpful for comparing inline line tables between MSVC and clang.
llvm-svn: 362037
Reid Kleckner