2nd part of D57095 with the same reason, just in another place. We never
fold branches that are not immediately in the current loop, but this check
is missing in `IsEdgeLive` As result, it may think that the edge in subloop is
dead while it's live. It's a pessimization in the current stance.
Differential Revision: https://reviews.llvm.org/D57147
Reviewed By: rupprecht
llvm-svn: 352170
Summary:
MemorySSA needs updating each time an instruction is moved.
LICM and control flow hoisting re-hoists instructions, thus needing another update when re-moving those instructions.
Pending cleanup: the MSSA update is duplicated, should be moved inside moveInstructionBefore.
Reviewers: jnspaulsson
Subscribers: sanjoy, jlebar, Prazek, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D57176
llvm-svn: 352092
After submitting https://reviews.llvm.org/D57138, I realized it was slightly more conservative than needed. The scalar indices don't appear to be a problem on a vector gep, we even had a test for that.
Differential Revision: https://reviews.llvm.org/D57161
llvm-svn: 352061
This is an alternative to https://reviews.llvm.org/D57103. After discussion, we dedicided to check this in as a temporary workaround, and pursue a true fix under the original thread.
The issue at hand is that the base rewriting algorithm doesn't consider the fact that GEPs can turn a scalar input into a vector of outputs. We had handling for scalar GEPs and fully vector GEPs (i.e. all vector operands), but not the scalar-base + vector-index forms. A true fix here requires treating GEP analogously to extractelement or shufflevector.
This patch is merely a workaround. It simply hides the crash at the cost of some ugly code gen for this presumable very rare pattern.
Differential Revision: https://reviews.llvm.org/D57138
llvm-svn: 352059
When we choose whether or not we should mark block as dead, we have an
inconsistent logic in markup of live blocks.
- We take candidate IF its terminator branches on constant AND it is immediately
in current loop;
- We mark successor live IF its terminator doesn't branch by constant OR it branches
by constant and the successor is its always taken block.
What we are missing here is that when the terminator branches on a constant but is
not taken as a candidate because is it not immediately in the current loop, we will
mark only one (always taken) successor as live. Therefore, we do NOT do the actual
folding but may NOT mark one of the successors as live. So the result of markup is
wrong in this case, and we may then hit various asserts.
Thanks Jordan Rupprech for reporting this!
Differential Revision: https://reviews.llvm.org/D57095
Reviewed By: rupprecht
llvm-svn: 352024
This patch relaxes restrictions on types of latch condition and range check.
In current implementation, they should match. This patch allows to handle
wide range checks against narrow condition. The motivating example is the
following:
int N = ...
for (long i = 0; (int) i < N; i++) {
if (i >= length) deopt;
}
In this patch, the option that enables this support is turned off by
default. We'll wait until it is switched to true.
Differential Revision: https://reviews.llvm.org/D56837
Reviewed By: reames
llvm-svn: 351926
This patch adds support of guards expressed as branches by widenable
conditions in Loop Predication.
Differential Revision: https://reviews.llvm.org/D56081
Reviewed By: reames
llvm-svn: 351805
Deopt operands are generally intended to record information about a site in code with minimal perturbation of the surrounding code. Idiomatically, they also tend to appear down rare paths. Putting these together, we have an obvious case for extending CVP w/deopt operand constant folding. Arguably, we should be doing this for all operands on all instructions, but that's definitely a much larger and risky change.
Differential Revision: https://reviews.llvm.org/D55678
llvm-svn: 351774
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
During the transforms in LoopSimplifyCFG, when we remove a dead exiting edge, the
parent loop may stop being reachable from the child loop, and therefore they become
siblings. If the former child loop had uses of some values from its former parent loop,
now such uses will require LCSSA Phis, even if they weren't needed before. So we must
form LCSSA for all loops that stopped being ancestors of the current loop in this case.
Differential Revision: https://reviews.llvm.org/D56144
Reviewed By: fedor.sergeev
llvm-svn: 351434
Function `DeleteDeadBlock` requires that all predecessors of a block
being deleted have already been deleted, with the exception of a
single-block loop. When we use it for removal of dead subloops that
contain more than one block, we may not fulfull this requirement and
fail an assertion.
This patch replaces invocation of `DeleteDeadBlock` with a generalized
version `DeleteDeadBlocks` that is able to deal with multiple dead blocks,
even if they contain some cycles.
Differential Revision: https://reviews.llvm.org/D56121
Reviewed By: fedor.sergeev
llvm-svn: 351433
For the given test SROA detects possible replacement and creates a correct alloca. After that SROA is adding lifetime markers for this new alloca. The function getNewAllocaSlicePtr is trying to deduce the pointer type based on the original alloca, which is split, to use it later in lifetime intrinsic.
For the test we ended up with such code (rA is initial alloca [10 x float], which is split, and rA.sroa.0.0 is a new split allocation)
```
%rA.sroa.0.0.rA.sroa_cast = bitcast i32* %rA.sroa.0 to [10 x float]* <----- this one causing the assertion and is an extra bitcast
%5 = bitcast [10 x float]* %rA.sroa.0.0.rA.sroa_cast to i8*
call void @llvm.lifetime.start.p0i8(i64 4, i8* %5)
```
isAllocaPromotable code assumes that a user of alloca may go into lifetime marker through bitcast but it must be the only one bitcast to i8* type. In the test it's not a i8* type, return false and throw the assertion.
As we are creating a pointer, which will be used in lifetime markers only, the proposed fix is to create a bitcast to i8* immediately to avoid extra bitcast creation.
The test is a greatly simplified to just reproduce the assertion.
Author: Igor Tsimbalist <igor.v.tsimbalist@intel.com>
Reviewers: chandlerc, craig.topper
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D55934
llvm-svn: 351325
Increment statistics counter NumSwitches at unswitchNontrivialInvariants() for
unswitching a non-trivial switch instruction. This is to fix a bug that it
increments NumBranches even for the case of switch instruction.
There is no functional change in this patch.
Differential Revision: https://reviews.llvm.org/D56408
llvm-svn: 351193
Currently when a select has a constant value in one branch and the select feeds
a conditional branch (via a compare/ phi and compare) we unfold the select
statement. This results in threading the conditional branch later on. Similar
opportunity exists when a select (with a constant in one branch) feeds a
switch (via a phi node). The patch unfolds select under this condition.
A testcase is provided.
llvm-svn: 350931
Summary:
The original patch addressed the use of BlockRPONumber by forcing a sequence point when accessing that map in a conditional. In short we found cases where that map was being accessed with blocks that had not yet been added to that structure. For context, I've kept the wall of text below, to what we are trying to fix, by always ensuring a updated BlockRPONumber.
== Backstory ==
I was investigating an ICE (segfault accessing a DenseMap item). This failure happened non-deterministically, with no apparent reason and only on a Windows build of LLVM (from October 2018).
After looking into the crashes (multiple core files) and running DynamoRio, the cores and DynamoRio (DR) log pointed to the same code in `GVN::performScalarPRE()`. The values in the map are unsigned integers, the keys are `llvm::BasicBlock*`. Our test case that triggered this warning and periodic crash is rather involved. But the problematic line looks to be:
GVN.cpp: Line 2197
```
if (BlockRPONumber[P] >= BlockRPONumber[CurrentBlock] &&
```
To test things out, I cooked up a patch that accessed the items in the map outside of the condition, by forcing a sequence point between accesses. DynamoRio stopped warning of the issue, and the test didn't seem to crash after 1000+ runs.
My investigation was on an older version of LLVM, (source from October this year). What it looks like was occurring is the following, and the assembly from the latest pull of llvm in December seems to confirm this might still be an issue; however, I have not witnessed the crash on more recent builds. Of course the asm in question is generated from the host compiler on that Windows box (not clang), but it hints that we might want to consider how we access the BlockRPONumber map in this conditional (line 2197, listed above). In any case, I don't think the host compiler is wrong, rather I think it is pointing out a possibly latent bug in llvm.
1) There is no sequence point for the `>=` operation.
2) A call to a `DenseMapBase::operator[]` can have the side effect of the map reallocating a larger store (more Buckets, via a call to `DenseMap::grow`).
3) It seems perfectly legal for a host compiler to generate assembly that stores the result of a call to `operator[]` on the stack (that's what my host compile of GVN.cpp is doing) . A second call to `operator[]` //might// encourage the map to 'grow' thus making any pointers to the map's store invalid. The `>=` compares the first and second values. If the first happens to be a pointer produced from operator[], it could be invalid when dereferenced at the time of comparison.
The assembly generated from the Window's host compiler does show the result of the first access to the map via `operator[]` produces a pointer to an unsigned int. And that pointer is being stored on the stack. If a second call to the map (which does occur) causes the map to grow, that address (on the stack) is now invalid.
Reviewers: t.p.northover, efriedma
Reviewed By: efriedma
Subscribers: efriedma, llvm-commits
Differential Revision: https://reviews.llvm.org/D55974
llvm-svn: 350880
Summary:
Step 2 in using MemorySSA in LICM:
Use MemorySSA in LICM to do sinking and hoisting, all under "EnableMSSALoopDependency" flag.
Promotion is disabled.
Enable flag in LICM sink/hoist tests to test correctness of this change. Moved one test which
relied on promotion, in order to test all sinking tests.
Reviewers: sanjoy, davide, gberry, george.burgess.iv
Subscribers: llvm-commits, Prazek
Differential Revision: https://reviews.llvm.org/D40375
llvm-svn: 350879
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
Current strategy of dropping `InstructionPrecedenceTracking` cache is to
invalidate the entire basic block whenever we change its contents. In fact,
`InstructionPrecedenceTracking` has 2 internal strictures: `OrderedInstructions`
that is needed to be invalidated whenever the contents changes, and the map
with first special instructions in block. This second map does not need an
update if we add/remove a non-special instuction because it cannot
affect the contents of this map.
This patch changes API of `InstructionPrecedenceTracking` so that it now
accounts for reasons under which we invalidate blocks. This should lead
to much less recalculations of the map and should save us some compile time
because in practice we don't typically add/remove special instructions.
Differential Revision: https://reviews.llvm.org/D54462
Reviewed By: efriedma
llvm-svn: 350694
minted `CallBase` class instead of the `CallSite` wrapper.
This moves the largest interwoven collection of APIs that traffic in
`CallSite`s. While a handful of these could have been migrated with
a minorly more shallow migration by converting from a `CallSite` to
a `CallBase`, it hardly seemed worth it. Most of the APIs needed to
migrate together because of the complex interplay of AA APIs and the
fact that converting from a `CallBase` to a `CallSite` isn't free in its
current implementation.
Out of tree users of these APIs can fairly reliably migrate with some
combination of `.getInstruction()` on the `CallSite` instance and
casting the resulting pointer. The most generic form will look like `CS`
-> `cast_or_null<CallBase>(CS.getInstruction())` but in most cases there
is a more elegant migration. Hopefully, this migrates enough APIs for
users to fully move from `CallSite` to the base class. All of the
in-tree users were easily migrated in that fashion.
Thanks for the review from Saleem!
Differential Revision: https://reviews.llvm.org/D55641
llvm-svn: 350503
In addition to finding dead uses of instructions, also find dead uses
of function arguments, and replace them with zero as well.
I'm changing the way the known bits are computed here to remove the
coupling between the transfer function and the algorithm. It previously
relied on the first op being visited first and computing known bits --
unless the first op is not an instruction, in which case they're computed
on the second op. I could have adjusted this to check for "instruction
or argument", but I think it's better to avoid the repeated calculation
with an explicit flag.
Differential Revision: https://reviews.llvm.org/D56247
llvm-svn: 350435
In some cases the order that we hoist instructions in means that when rehoisting
(which uses the same order as hoisting) we can rehoist to a block A, then a
block B, then block A again. This currently causes an assertion failure as it
expects that when changing the hoist point it only ever moves to a block that
dominates the hoist point being moved from.
Fix this by moving the re-hoist point when it doesn't dominate the dominator of
hoisted instruction, or in other words when it wouldn't dominate the uses of
the instruction being rehoisted.
Differential Revision: https://reviews.llvm.org/D55266
llvm-svn: 350408
If an instruction has no demanded bits, remove it directly during BDCE,
instead of leaving it for something else to clean up.
Differential Revision: https://reviews.llvm.org/D56185
llvm-svn: 350257
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The previous attempt to land this lead to miscompiles, because cases
where uses were initially dead but were later found to be live during
further analysis were not always correctly removed from the DeadUses
set. This is fixed now and the added test case demanstrates such an
instance.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 350188
Deletion of dead blocks in arbitrary order may lead to failure
of assertion in `DeleteDeadBlock` that requires that we have
deleted all predecessors before we can delete the current block.
We should instead delete them in RPO order.
llvm-svn: 350116
Summary:
Existing LIR recognizes CTLZ where shifting input variable right until it is zero. (Shift-Until-Zero idiom)
This commit:
1. Augments Shift-Until-Zero idiom to recognize CTTZ where input variable is shifted left.
2. Prepare for BitScan idiom recognition.
Patch by Yuanfang Chen (tabloid.adroit)
Reviewers: craig.topper, evstupac
Reviewed By: craig.topper
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55876
llvm-svn: 350074
This patch teaches LoopSimplifyCFG to remove dead exiting edges
from loops.
Differential Revision: https://reviews.llvm.org/D54025
Reviewed By: fedor.sergeev
llvm-svn: 350049
Both of these places reference memset-like loops. Memset is precise.
Trying to keep these patches super small so they're easily post-commit
verifiable, as requested in D44748.
llvm-svn: 350044
Trying to keep these patches super small so they're easily post-commit
verifiable, as requested in D44748.
srcSize is derived from the size of an alloca, and we quit out if the
size of that is > the size of the thing we're copying to. Hence, we
should always copy everything over, so these sizes are precise.
Don't make srcSize itself a LocationSize, since optionality isn't
helpful, and we do some comparisons against other sizes elsewhere in
that function.
llvm-svn: 350019
Instruction::isLifetimeStartOrEnd() checks whether an Instruction is an
llvm.lifetime.start or an llvm.lifetime.end intrinsic.
This was suggested as a cleanup in D55967.
Differential Revision: https://reviews.llvm.org/D56019
llvm-svn: 349964
The current llvm.mem.parallel_loop_access metadata has a problem in that
it uses LoopIDs. LoopID unfortunately is not loop identifier. It is
neither unique (there's even a regression test assigning the some LoopID
to multiple loops; can otherwise happen if passes such as LoopVersioning
make copies of entire loops) nor persistent (every time a property is
removed/added from a LoopID's MDNode, it will also receive a new LoopID;
this happens e.g. when calling Loop::setLoopAlreadyUnrolled()).
Since most loop transformation passes change the loop attributes (even
if it just to mark that a loop should not be processed again as
llvm.loop.isvectorized does, for the versioned and unversioned loop),
the parallel access information is lost for any subsequent pass.
This patch unlinks LoopIDs and parallel accesses.
llvm.mem.parallel_loop_access metadata on instruction is replaced by
llvm.access.group metadata. llvm.access.group points to a distinct
MDNode with no operands (avoiding the problem to ever need to add/remove
operands), called "access group". Alternatively, it can point to a list
of access groups. The LoopID then has an attribute
llvm.loop.parallel_accesses with all the access groups that are parallel
(no dependencies carries by this loop).
This intentionally avoid any kind of "ID". Loops that are clones/have
their attributes modifies retain the llvm.loop.parallel_accesses
attribute. Access instructions that a cloned point to the same access
group. It is not necessary for each access to have it's own "ID" MDNode,
but those memory access instructions with the same behavior can be
grouped together.
The behavior of llvm.mem.parallel_loop_access is not changed by this
patch, but should be considered deprecated.
Differential Revision: https://reviews.llvm.org/D52116
llvm-svn: 349725
This (mostly) fixes https://bugs.llvm.org/show_bug.cgi?id=39771.
BDCE currently detects instructions that don't have any demanded bits
and replaces their uses with zero. However, if an instruction has
multiple uses, then some of the uses may be dead (have no demanded bits)
even though the instruction itself is still live. This patch extends
DemandedBits/BDCE to detect such uses and replace them with zero.
While this will not immediately render any instructions dead, it may
lead to simplifications (in the motivating case, by converting a rotate
into a simple shift), break dependencies, etc.
The implementation tries to strike a balance between analysis power and
complexity/memory usage. Originally I wanted to track demanded bits on
a per-use level, but ultimately we're only really interested in whether
a use is entirely dead or not. I'm using an extra set to track which uses
are dead. However, as initially all uses are dead, I'm not storing uses
those user is also dead. This case is checked separately instead.
The test case has a couple of cases that are not simplified yet. In
particular, we're only looking at uses of instructions right now. I think
it would make sense to also extend this to arguments. Furthermore
DemandedBits doesn't yet know some of the tricks that InstCombine does
for the demanded bits or bitwise or/and/xor in combination with known
bits information.
Differential Revision: https://reviews.llvm.org/D55563
llvm-svn: 349674
When using clang with `-fno-unroll-loops` (implicitly added with `-O1`),
the LoopUnrollPass is not not added to the (legacy) pass pipeline. This
also means that it will not process any loop metadata such as
llvm.loop.unroll.enable (which is generated by #pragma unroll or
WarnMissedTransformationsPass emits a warning that a forced
transformation has not been applied (see
https://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20181210/610833.html).
Such explicit transformations should take precedence over disabling
heuristics.
This patch unconditionally adds LoopUnrollPass to the optimizing
pipeline (that is, it is still not added with `-O0`), but passes a flag
indicating whether automatic unrolling is dis-/enabled. This is the same
approach as LoopVectorize uses.
The new pass manager's pipeline builder has no option to disable
unrolling, hence the problem does not apply.
Differential Revision: https://reviews.llvm.org/D55716
llvm-svn: 349509
When splitting up an alloca's uses we were dropping any explicit
alignment tags, which means they default to the ABI-required default
alignment and this can cause miscompiles if the real value was smaller.
Also refactor the TBAA metadata into a parent class since it's shared by
both children anyway.
llvm-svn: 349465
The current code relies on LeaderUseCount to determine if we can remove
an SSA copy, but in that the LeaderUseCount does not refer to the SSA
copy. If a SSA copy is a dominating leader, we use the operand as dominating
leader instead. This means we removed a user of a ssa copy and we should
decrement its use count, so we can remove the ssa copy once it becomes dead.
Fixes PR38804.
Reviewers: efriedma, davide
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D51595
llvm-svn: 349217
Optimization transformations are intentionally disabled by the 'optnone'
function attribute. Therefore do not warn if transformation metadata is
still present.
Using the legacy pass manager structure, the `skipFunction` method takes
care for the optnone attribute (already called before this patch). For
the new pass manager, there is no equivalent, so we check for the
'optnone' attribute manually.
Differential Revision: https://reviews.llvm.org/D55690
llvm-svn: 349184
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
The previous version of this patch did not perform dependency checking
properly: While the dependency is checked at the position of the memset,
the used size must be that of the memcpy. Previously the size of the
memset was used, which missed modification in the region
MemSetSize..CopySize, resulting in miscompiles. The added tests cover
variations of this issue.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 349078
When multiple loop transformation are defined in a loop's metadata, their order of execution is defined by the order of their respective passes in the pass pipeline. For instance, e.g.
#pragma clang loop unroll_and_jam(enable)
#pragma clang loop distribute(enable)
is the same as
#pragma clang loop distribute(enable)
#pragma clang loop unroll_and_jam(enable)
and will try to loop-distribute before Unroll-And-Jam because the LoopDistribute pass is scheduled after UnrollAndJam pass. UnrollAndJamPass only supports one inner loop, i.e. it will necessarily fail after loop distribution. It is not possible to specify another execution order. Also,t the order of passes in the pipeline is subject to change between versions of LLVM, optimization options and which pass manager is used.
This patch adds 'followup' attributes to various loop transformation passes. These attributes define which attributes the resulting loop of a transformation should have. For instance,
!0 = !{!0, !1, !2}
!1 = !{!"llvm.loop.unroll_and_jam.enable"}
!2 = !{!"llvm.loop.unroll_and_jam.followup_inner", !3}
!3 = !{!"llvm.loop.distribute.enable"}
defines a loop ID (!0) to be unrolled-and-jammed (!1) and then the attribute !3 to be added to the jammed inner loop, which contains the instruction to distribute the inner loop.
Currently, in both pass managers, pass execution is in a fixed order and UnrollAndJamPass will not execute again after LoopDistribute. We hope to fix this in the future by allowing pass managers to run passes until a fixpoint is reached, use Polly to perform these transformations, or add a loop transformation pass which takes the order issue into account.
For mandatory/forced transformations (e.g. by having been declared by #pragma omp simd), the user must be notified when a transformation could not be performed. It is not possible that the responsible pass emits such a warning because the transformation might be 'hidden' in a followup attribute when it is executed, or it is not present in the pipeline at all. For this reason, this patche introduces a WarnMissedTransformations pass, to warn about orphaned transformations.
Since this changes the user-visible diagnostic message when a transformation is applied, two test cases in the clang repository need to be updated.
To ensure that no other transformation is executed before the intended one, the attribute `llvm.loop.disable_nonforced` can be added which should disable transformation heuristics before the intended transformation is applied. E.g. it would be surprising if a loop is distributed before a #pragma unroll_and_jam is applied.
With more supported code transformations (loop fusion, interchange, stripmining, offloading, etc.), transformations can be used as building blocks for more complex transformations (e.g. stripmining+stripmining+interchange -> tiling).
Reviewed By: hfinkel, dmgreen
Differential Revision: https://reviews.llvm.org/D49281
Differential Revision: https://reviews.llvm.org/D55288
llvm-svn: 348944
IR-printing AfterPass instrumentation might be called on a loop
that has just been invalidated. We should skip printing it to
avoid spurious asserts.
Reviewed By: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D54740
llvm-svn: 348887
Currently memcpyopt optimizes cases like
memset(a, byte, N);
memcpy(b, a, M);
to
memset(a, byte, N);
memset(b, byte, M);
if M <= N. Often this allows further simplifications down the line,
which drop the first memset entirely.
This patch extends this optimization for the case where M > N, but we
know that the bytes a[N..M] are undef due to alloca/lifetime.start.
This situation arises relatively often for Rust code, because Rust does
not initialize trailing structure padding and loves to insert redundant
memcpys. This also fixes https://bugs.llvm.org/show_bug.cgi?id=39844.
For the implementation, I'm reusing a bit of code for a similar existing
optimization (direct memcpy of undef). I've also added memset support to
MemDepAnalysis GetLocation -- Instead, getPointerDependencyFrom could be
used, but it seems to make more sense to add this to GetLocation and thus
make the computation cachable.
Differential Revision: https://reviews.llvm.org/D55120
llvm-svn: 348645
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
Unlike the previous iteration of this patch, getDemandedBits() can now
again be called on arbirary (sized) instructions, even if they don't
have integer or vector of integer type. (For vector types the size of the
returned mask will now be the scalar size in bits though.)
The added LoopVectorize test case shows a case which triggered an
assertion failure with the previous attempt, because getDemandedBits()
was called on a pointer-typed instruction.
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348602
This patch introduces a new instinsic `@llvm.experimental.widenable_condition`
that allows explicit representation for guards. It is an alternative to using
`@llvm.experimental.guard` intrinsic that does not contain implicit control flow.
We keep finding places where `@llvm.experimental.guard` is not supported or
treated too conservatively, and there are 2 reasons to that:
- `@llvm.experimental.guard` has memory write side effect to model implicit control flow,
and this sometimes confuses passes and analyzes that work with memory;
- Not all passes and analysis are aware of the semantics of guards. These passes treat them
as regular throwing call and have no idea that the condition of guard may be used to prove
something. One well-known place which had caused us troubles in the past is explicit loop
iteration count calculation in SCEV. Another example is new loop unswitching which is not
aware of guards. Whenever a new pass appears, we potentially have this problem there.
Rather than go and fix all these places (and commit to keep track of them and add support
in future), it seems more reasonable to leverage the existing optimizer's logic as much as possible.
The only significant difference between guards and regular explicit branches is that guard's condition
can be widened. It means that a guard contains (explicitly or implicitly) a `deopt` block successor,
and it is always legal to go there no matter what the guard condition is. The other successor is
a guarded block, and it is only legal to go there if the condition is true.
This patch introduces a new explicit form of guards alternative to `@llvm.experimental.guard`
intrinsic. Now a widenable guard can be represented in the CFG explicitly like this:
%widenable_condition = call i1 @llvm.experimental.widenable.condition()
%new_condition = and i1 %cond, %widenable_condition
br i1 %new_condition, label %guarded, label %deopt
guarded:
; Guarded instructions
deopt:
call type @llvm.experimental.deoptimize(<args...>) [ "deopt"(<deopt_args...>) ]
The new intrinsic `@llvm.experimental.widenable.condition` has semantics of an
`undef`, but the intrinsic prevents the optimizer from folding it early. This form
should exploit all optimization boons provided to `br` instuction, and it still can be
widened by replacing the result of `@llvm.experimental.widenable.condition()`
with `and` with any arbitrary boolean value (as long as the branch that is taken when
it is `false` has a deopt and has no side-effects).
For more motivation, please check llvm-dev discussion "[llvm-dev] Giving up using
implicit control flow in guards".
This patch introduces this new intrinsic with respective LangRef changes and a pass
that converts old-style guards (expressed as intrinsics) into the new form.
The naming discussion is still ungoing. Merging this to unblock further items. We can
later change the name of this intrinsic.
Reviewed By: reames, fedor.sergeev, sanjoy
Differential Revision: https://reviews.llvm.org/D51207
llvm-svn: 348593
The current algorithm that collects live/dead/inloop blocks relies on some invariants
related to RPO and PO traversals. In particular, the important fact it requires is that
the only loop's latch is the first block in PO traversal. It also relies on fact that during
RPO we visit all prececessors of a block before we visit this block (backedges ignored).
If a loop has irreducible non-loop cycle inside, both these assumptions may break.
This patch adds detection for this situation and prohibits the terminator folding
for loops with irreducible CFG.
We can in theory support this later, for this some algorithmic changes are needed.
Besides, irreducible CFG is not a frequent situation and we can just don't bother.
Thanks @uabelho for finding this!
Differential Revision: https://reviews.llvm.org/D55357
Reviewed By: skatkov
llvm-svn: 348567
DemandedBits and BDCE currently only support scalar integers. This
patch extends them to also handle vector integer operations. In this
case bits are not tracked for individual vector elements, instead a
bit is demanded if it is demanded for any of the elements. This matches
the behavior of computeKnownBits in ValueTracking and
SimplifyDemandedBits in InstCombine.
The getDemandedBits() method can now only be called on instructions that
have integer or vector of integer type. Previously it could be called on
any sized instruction (even if it was not particularly useful). The size
of the return value is now always the scalar size in bits (while
previously it was the type size in bits).
Differential Revision: https://reviews.llvm.org/D55297
llvm-svn: 348549
Partial Redundancy Elimination of GEPs prevents CodeGenPrepare from
sinking the addressing mode computation of memory instructions back
to its uses. The problem comes from the insertion of PHIs, which
confuse CGP and make it bail.
I've autogenerated the check lines of an existing test and added a
store instruction to demonstrate the motivation behind this change.
The store is now using the gep instead of a phi.
Differential Revision: https://reviews.llvm.org/D55009
llvm-svn: 348496
This reverts commit r348457.
The original commit causes clang to crash when doing an instrumented
build with a new pass manager. Reverting to unbreak our integrate.
llvm-svn: 348484
This patch teaches LoopSimplifyCFG to delete loop blocks that have
become unreachable after terminator folding has been done.
Differential Revision: https://reviews.llvm.org/D54023
Reviewed By: anna
llvm-svn: 348457
Summary:
The remaining code paths that ControlFlowHoisting introduced that were
not disabled, increased compile time by 3x for some benchmarks.
The time is spent in DominatorTree updates.
Reviewers: john.brawn, mkazantsev
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D55313
llvm-svn: 348345
Terminator folding transform lacks MemorySSA update for memory Phis,
while they exist within MemorySSA analysis. They need exactly the same
type of updates as regular Phis. Failing to update them properly ends up
with inconsistent MemorySSA and manifests in various assertion failures.
This patch adds Memory Phi updates to this transform.
Thanks to @jonpa for finding this!
Differential Revision: https://reviews.llvm.org/D55050
Reviewed By: asbirlea
llvm-svn: 347979
This commit caused a large compile-time slowdown in some cases when NDEBUG is
off due to the dominator tree verification it added. Fix this by only doing
dominator tree and loop info verification when something has been hoisted.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347889
Summary:
When splitting musttail calls, the split blocks' original terminators
get removed; inform the DTU when this happens.
Also add a testcase that fails an assertion in the DTU without this fix.
Reviewers: fhahn, junbuml
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55027
llvm-svn: 347872
1. The variables were confusing: 'C' typically refers to a constant, but here it was the Cmp.
2. Formatting violations.
3. Simplify code to return true/false constant.
llvm-svn: 347868
This reverts commits r347776 and r347778.
The first one, r347776, caused significant compile time regressions
for certain input files, see PR39836 for details.
llvm-svn: 347867
This commit caused failures because it failed to correctly handle cases where
we hoist a phi, then hoist a use of that phi, then have to rehoist that use. We
need to make sure that we rehoist the use to _after_ the hoisted phi, which we
do by always rehoisting to the immediate dominator instead of just rehoisting
everything to the original preheader.
An option is also added to control whether control flow is hoisted, which is
off in this commit but will be turned on in a subsequent commit.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347776
It fixes a bug that doesn't update Phi inputs of the only live successor that
is in the list of block's successors more than once.
Thanks @uabelho for finding this.
Differential Revision: https://reviews.llvm.org/D54849
Reviewed By: anna
llvm-svn: 347640
OriginalOp of a Predicate refers to the original IR value,
before renaming. While solving in IPSCCP, we have to use
the operand of the ssa_copy instead, to avoid missing
updates for nested conditions on the same IR value.
Fixes PR39772.
llvm-svn: 347524
When removing edges, we also update Phi inputs and may end up removing
a Phi if it has only one input. We should not do it for edges that leave the current
loop because these Phis are LCSSA Phis and need to be preserved.
Thanks @dmgreen for finding this!
Differential Revision: https://reviews.llvm.org/D54841
llvm-svn: 347484
This patch fixes PR39695.
The original LoopSink only considers memory alias in loop body. But PR39695 shows that instructions following sink candidate in preheader should also be checked. This is a conservative patch, it simply adds whole preheader block to alias set. It may lose some optimization opportunity, but I think that is very rare because: 1 in the most common case st/ld to the same address, the load should already be optimized away. 2 usually preheader is not very large.
Differential Revision: https://reviews.llvm.org/D54659
llvm-svn: 347325
The initial version of patch lacked Phi nodes updates in destinations of removed
edges. This version contains this update and tests on this situation.
Differential Revision: https://reviews.llvm.org/D54021
llvm-svn: 347289
The general approach taken is to make note of loop invariant branches, then when
we see something conditional on that branch, such as a phi, we create a copy of
the branch and (empty versions of) its successors and hoist using that.
This has no impact by itself that I've been able to see, as LICM typically
doesn't see such phis as they will have been converted into selects by the time
LICM is run, but once we start doing phi-to-select conversion later it will be
important.
Differential Revision: https://reviews.llvm.org/D52827
llvm-svn: 347190
This patch introduces infrastructure and the simplest case for constant-folding
of branch and switch instructions within loop into unconditional branches.
It is useful as a cleanup for such passes as loop unswitching that sometimes
produce such branches.
Only the simplest case supported in this patch: after the folding, no block
should become dead or stop being part of the loop. Support for more
sophisticated cases will go separately in follow-up patches.
Differential Revision: https://reviews.llvm.org/D54021
Reviewed By: anna
llvm-svn: 347183
Fix all of the missing debug location errors in CVP found by debugify.
This includes the missing-location-after-udiv-truncation case described
in llvm.org/PR38178.
llvm-svn: 347147
We need to control exponential behavior of loop-unswitch so we do not get
run-away compilation.
Suggested solution is to introduce a multiplier for an unswitch cost that
makes cost prohibitive as soon as there are too many candidates and too
many sibling loops (meaning we have already started duplicating loops
by unswitching).
It does solve the currently known problem with compile-time degradation
(PR 39544).
Tests are built on top of a recently implemented CHECK-COUNT-<num>
FileCheck directives.
Reviewed By: chandlerc, mkazantsev
Differential Revision: https://reviews.llvm.org/D54223
llvm-svn: 347097
This patch updates DuplicateInstructionsInSplitBetween to update a DTU
instead of applying updates to the DT directly.
Given that there only are 2 users, also updated them in this patch to
avoid churn.
I slightly moved the code in CallSiteSplitting around to reduce the
places where we have to pass in DTU. If necessary, I could split those
changes in a separate patch.
This fixes missing DT updates when dealing with musttail calls in
CallSiteSplitting, by using DTU->deleteBB.
Reviewers: junbuml, kuhar, NutshellySima, indutny, brzycki
Reviewed By: NutshellySima
llvm-svn: 346769
Summary:
This patch introduces DebugCounter into ConstProp pass at per-transformation level.
It will provide an option to skip first n or stop after n transformations for the whole ConstProp pass.
This will make debug easier for the pass, also providing chance to do transformation level bisecting.
Reviewers: davide, fhahn
Reviewed By: fhahn
Subscribers: llozano, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D50094
llvm-svn: 346720
This patch relaxes overconservative checks on whether or not we could write
memory before we execute an instruction. This allows us to hoist guards out of
loops even if they are not in the header block.
Differential Revision: https://reviews.llvm.org/D50891
Reviewed By: fedor.sergeev
llvm-svn: 346643
ComputeValueKnownInPredecessors has a "visited" set to prevent infinite
loops, since a value can be visited more than once. However, the
implementation didn't prevent the algorithm from taking exponential
time. Instead of removing elements from the RecursionSet one at a time,
we should keep around the whole set until
ComputeValueKnownInPredecessors finishes, then discard it.
The testcase is synthetic because I was having trouble effectively
reducing the original. But it's basically the same idea.
Instead of failing, we could theoretically cache the result instead.
But I don't think it would help substantially in practice.
Differential Revision: https://reviews.llvm.org/D54239
llvm-svn: 346562
After D45330, Dominators are required for IPSCCP and can be preserved.
This patch preserves DominatorTreeAnalysis in the new pass manager. AFAIK the legacy pass manager cannot preserve function analysis required by a module analysis.
Reviewers: davide, dberlin, chandlerc, efriedma, kuhar, NutshellySima
Reviewed By: chandlerc, kuhar, NutshellySima
Differential Revision: https://reviews.llvm.org/D47259
llvm-svn: 346486
We can stop recording conditions once we reached the immediate dominator
for the block containing the call site. Conditions in predecessors of the
that node will be the same for all paths to the call site and splitting
is not beneficial.
This patch makes CallSiteSplitting dependent on the DT anlysis. because
the immediate dominators seem to be the easiest way of finding the node
to stop at.
I had to update some exiting tests, because they were checking for
conditions that were true/false on all paths to the call site. Those
should now be handled by instcombine/ipsccp.
Reviewers: davide, junbuml
Reviewed By: junbuml
Differential Revision: https://reviews.llvm.org/D44627
llvm-svn: 346483
This patch adds logic to detect reductions across the inner and outer
loop by following the incoming values of PHI nodes in the outer loop. If
the incoming values take part in a reduction in the inner loop or come
from outside the outer loop, we found a reduction spanning across inner
and outer loop.
With this change, ~10% more loops are interchanged in the LLVM
test-suite + SPEC2006.
Fixes https://bugs.llvm.org/show_bug.cgi?id=30472
Reviewers: mcrosier, efriedma, karthikthecool, davide, hfinkel, dmgreen
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D43245
llvm-svn: 346438
The patch has been reverted because it ended up prohibiting propagation
of a constant to exit value. For such values, we should skip all checks
related to hard uses because propagating a constant is always profitable.
Differential Revision: https://reviews.llvm.org/D53691
llvm-svn: 346397
LSR reassociates constants as unfolded offsets when the constants fit as
immediate add operands, which currently prevents such constants from being
combined later with loop invariant registers.
This patch modifies GenerateCombinations() to generate a second formula which
includes the unfolded offset in the combined loop-invariant register.
This commit fixes a bug in the original patch (committed at r345114, reverted
at r345123).
Differential Revision: https://reviews.llvm.org/D51861
llvm-svn: 346390
When partial unswitch operates on multiple conditions at once, .e.g:
if (Cond1 || Cond2 || NonInv) ...
it should infer (and replace) values for individual conditions only on one
side of unswitch and not another.
More precisely only these derivations hold true:
(Cond1 || Cond2) == false => Cond1 == Cond2 == false
(Cond1 && Cond2) == true => Cond1 == Cond2 == true
By the way we organize unswitching it means only replacing on "continue" blocks
and never on "unswitched" ones. Since trivial unswitch does not have "unswitched"
blocks it does not have this problem.
Fixes PR 39568.
Reviewers: chandlerc, asbirlea
Differential Revision: https://reviews.llvm.org/D54211
llvm-svn: 346350
If we simplify an instruction to itself, we do not need to add a user to
itself. For congruence classes with a defining expression, we already
use a similar logic.
Fixes PR38259.
Reviewers: davide, efriedma, mcrosier
Reviewed By: davide
Differential Revision: https://reviews.llvm.org/D51168
llvm-svn: 346335
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
LICM relies on variable `MustExecute` which is conservatively set to `false`
in all non-headers. It is used when we decide whether or not we want to hoist
an instruction or a guard.
For the guards, it might be too conservative to use this variable, we can
instead use a more precise logic from LoopSafetyInfo. Currently it is only NFC
because `IsMemoryNotModified` is also conservatively set to `false` for all
non-headers, and we cannot hoist guards from non-header blocks. However once we
give up using `IsMemoryNotModified` and use a smarter check instead, this will
allow us to hoist guards from all mustexecute non-header blocks.
Differential Revision: https://reviews.llvm.org/D50888
Reveiwed By: fedor.sergeev
llvm-svn: 346204
This patch makes LICM use `ICFLoopSafetyInfo` that is a smarter version
of LoopSafetyInfo that leverages power of Implicit Control Flow Tracking
to keep track of throwing instructions and give less pessimistic answers
to queries related to throws.
The ICFLoopSafetyInfo itself has been introduced in rL344601. This patch
enables it in LICM only.
Differential Revision: https://reviews.llvm.org/D50377
Reviewed By: apilipenko
llvm-svn: 346201
This reverts commit 2f425e9c7946b9d74e64ebbfa33c1caa36914402.
It seems that the check that we still should do the transform if we
know the result is constant is missing in this code. So the logic that
has been deleted by this change is still sometimes accidentally useful.
I revert the change to see what can be done about it. The motivating
case is the following:
@Y = global [400 x i16] zeroinitializer, align 1
define i16 @foo() {
entry:
br label %for.body
for.body: ; preds = %entry, %for.body
%i = phi i16 [ 0, %entry ], [ %inc, %for.body ]
%arrayidx = getelementptr inbounds [400 x i16], [400 x i16]* @Y, i16 0, i16 %i
store i16 0, i16* %arrayidx, align 1
%inc = add nuw nsw i16 %i, 1
%cmp = icmp ult i16 %inc, 400
br i1 %cmp, label %for.body, label %for.end
for.end: ; preds = %for.body
%inc.lcssa = phi i16 [ %inc, %for.body ]
ret i16 %inc.lcssa
}
We should be able to figure out that the result is constant, but the patch
breaks it.
Differential Revision: https://reviews.llvm.org/D51584
llvm-svn: 346198
Summary:
This patch prevents MergeICmps to performn the transformation if the address operand GEP of the load instruction has a use outside of the load's parent block. Without this patch, compiler crashes with the given test case because the use of `%first.i` is still around when the basic block is erased from https://github.com/llvm-mirror/llvm/blob/master/lib/Transforms/Scalar/MergeICmps.cpp#L620. I think checking `isUsedOutsideOfBlock` with `GEP` is the original intention of the code, as the checking for `LoadI` is already performed in the same function.
This patch is incomplete though, as this makes the pass overly conservative and fails the test `tuple-four-int8.ll`. I believe what needs to be done is checking if GEP has a use outside of block that is not the part of "Comparisons" chain. Submit the patch as of now to prevent compiler crash.
Reviewers: courbet, trentxintong
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54089
llvm-svn: 346151
Summary:
-mldst-motion creates a new phi node without any debug info. Use the merged debug location from the incoming stores to fix this.
Fixes PR38177. The test case here is (somewhat) simplified from:
```
struct S {
int foo;
void fn(int bar);
};
void S::fn(int bar) {
if (bar)
foo = 1;
else
foo = 0;
}
```
Reviewers: dblaikie, gbedwell, aprantl, vsk
Reviewed By: vsk
Subscribers: vsk, JDevlieghere, llvm-commits
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D54019
llvm-svn: 346027
This patch factors out a function that makes all required updates
whenever an instruction gets erased.
Differential Revision: https://reviews.llvm.org/D54011
Reviewed By: apilipenko
llvm-svn: 345914
Inner-loop only reductions require additional checks to make sure they
form a load-phi-store cycle across inner and outer loop. Otherwise the
reduction value is not properly preserved. This patch disables
interchanging such loops for now, as it causes miscompiles in some
cases and it seems to apply only for a tiny amount of loops. Across the
test-suite, SPEC2000 and SPEC2006, 61 instead of 62 loops are
interchange with inner loop reduction support disabled. With
-loop-interchange-threshold=-1000, 3256 instead of 3267.
See the discussion and history of D53027 for an outline of how such legality
checks could look like.
Reviewers: efriedma, mcrosier, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D53027
llvm-svn: 345877
When rewriting loop exit values, IndVars considers this transform not profitable if
the loop instruction has a loop user which it believes cannot be optimized away.
In current implementation only calls that immediately use the instruction are considered
as such.
This patch extends the definition of "hard" users to any side-effecting instructions
(which usually cannot be optimized away from the loop) and also allows handling
of not just immediate users, but use chains.
Differentlai Revision: https://reviews.llvm.org/D51584
Reviewed By: etherzhhb
llvm-svn: 345814
Unlike its legacy counterpart new pass manager's LoopUnrollPass does
not provide any means to select which flavors of unroll to run
(runtime, peeling, partial), relying on global defaults.
In some cases having ability to run a restricted LoopUnroll that
does more than LoopFullUnroll is needed.
Introduced LoopUnrollOptions to select optional unroll behaviors.
Added 'unroll<peeling>' to PassRegistry mainly for the sake of testing.
Reviewers: chandlerc, tejohnson
Differential Revision: https://reviews.llvm.org/D53440
llvm-svn: 345723
For some unclear reason rewriteLoopExitValues considers recalculation
after the loop profitable if it has some "soft uses" outside the loop (i.e. any
use other than call and return), even if we have proved that it has a user inside
the loop which we think will not be optimized away.
There is no existing unit test that would explain this. This patch provides an
example when rematerialisation of exit value is not profitable but it passes
this check due to presence of a "soft use" outside the loop.
It makes no sense to recalculate value on exit if we are going to compute it
due to some irremovable within the loop. This patch disallows applying this
transform in the described situation.
Differential Revision: https://reviews.llvm.org/D51581
Reviewed By: etherzhhb
llvm-svn: 345708
This fixes an assertion when constant folding a GEP when the part of the offset
was in i32 (IndexSize, as per DataLayout) and part in the i64 (PointerSize) in
the newly created test case.
Differential Revision: https://reviews.llvm.org/D52609
llvm-svn: 345585
Summary:
The visitICmp analysis function would record compares of pointer types, as size 0. This causes the resulting memcmp() call to have the wrong total size.
Found with "self-build" of clang/LLVM on Windows.
Reviewers: christylee, trentxintong, courbet
Reviewed By: courbet
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53536
llvm-svn: 345413
This patch adds support of `llvm.experimental.guard` intrinsics to non-trivial
simple loop unswitching. These intrinsics represent implicit control flow which
has pretty much the same semantics as usual conditional branches. The
algorithm of dealing with them is following:
- Consider guards as unswitching candidates;
- If a guard is considered the best candidate, turn it into a branch;
- Apply normal unswitching algorithm on this branch.
The patch has no compile time effect on code that does not contain any guards.
Differential Revision: https://reviews.llvm.org/D53744
Reviewed By: chandlerc
llvm-svn: 345387
We should be able to make all relevant checks before we actually start the non-trivial
unswitching, so that we could guarantee that once we have started the transform,
it will always succeed.
Reviewed By: chandlerc
Differential Revision: https://reviews.llvm.org/D53747
llvm-svn: 345375
This work is to avoid regressions when we seperate FNeg from the FSub IR instruction.
Differential Revision: https://reviews.llvm.org/D53205
llvm-svn: 345146
LSR reassociates constants as unfolded offsets when the constants fit as
immediate add operands, which currently prevents such constants from being
combined later with loop invariant registers.
This patch modifies GenerateCombinations() to generate a second formula which
includes the unfolded offset in the combined loop-invariant register.
Differential Revision: https://reviews.llvm.org/D51861
llvm-svn: 345114
We need to update this code before introducing an 'fneg' instruction in IR,
so we might as well kill off the integer neg/not queries too.
This is no-functional-change-intended for scalar code and most vector code.
For vectors, we can see that the 'match' API allows for undef elements in
constants, so we optimize those cases better.
Ideally, there would be a test for each code diff, but I don't see evidence
of that for the existing code, so I didn't try very hard to come up with new
vector tests for each code change.
Differential Revision: https://reviews.llvm.org/D53533
llvm-svn: 345042
This pass could probably be modified slightly to allow
vector splat transforms for practically no cost, but
it only works on scalars for now. So the use of the
newer 'match' API should make no functional difference.
llvm-svn: 345030
This removes the primary remaining API producing `TerminatorInst` which
will reduce the rate at which code is introduced trying to use it and
generally make it much easier to remove the remaining APIs across the
codebase.
Also clean up some of the stragglers that the previous mechanical update
of variables missed.
Users of LLVM and out-of-tree code generally will need to update any
explicit variable types to handle this. Replacing `TerminatorInst` with
`Instruction` (or `auto`) almost always works. Most of these edits were
made in prior commits using the perl one-liner:
```
perl -i -ple 's/TerminatorInst(\b.* = .*getTerminator\(\))/Instruction\1/g'
```
This also my break some rare use cases where people overload for both
`Instruction` and `TerminatorInst`, but these should be easily fixed by
removing the `TerminatorInst` overload.
llvm-svn: 344504
are terminators without relying on the specific `TerminatorInst` type.
This required cleaning up two users of `InstVisitor`s usage of
`TerminatorInst` as well.
llvm-svn: 344503
by `getTerminator()` calls instead be declared as `Instruction`.
This is the biggest remaining chunk of the usage of `getTerminator()`
that insists on the narrow type and so is an easy batch of updates.
Several files saw more extensive updates where this would cascade to
requiring API updates within the file to use `Instruction` instead of
`TerminatorInst`. All of these were trivial in nature (pervasively using
`Instruction` instead just worked).
llvm-svn: 344502
This is the last interesting usage in all of LLVM's headers. The
remaining usages in headers are the core typesystem bits (Core.h,
instruction types, and InstVisitor) and as the return of
`BasicBlock::getTerminator`. The latter is the big remaining API point
that I'll remove after mass updates to user code.
llvm-svn: 344501
This requires updating a number of .cpp files to adapt to the new API.
I've just systematically updated all uses of `TerminatorInst` within
these files te `Instruction` so thta I won't have to touch them again in
the future.
llvm-svn: 344498
Moving away from UnknownSize is part of the effort to migrate us to
LocationSizes (e.g. the cleanup promised in D44748).
This doesn't entirely remove all of the uses of UnknownSize; some uses
require tweaks to assume that UnknownSize isn't just some kind of int.
This patch is intended to just be a trivial replacement for all places
where LocationSize::unknown() will Just Work.
llvm-svn: 344186
I've added a new test case that causes the scalarizer to try and use
dead-and-erased values - caused by the basic blocks not being in
domination order within the function. To fix this, instead of iterating
through the blocks in function order, I walk them in reverse post order.
Differential Revision: https://reviews.llvm.org/D52540
llvm-svn: 344128
There are places where we need to merge multiple LocationSizes of
different sizes into one, and get a sensible result.
There are other places where we want to optimize aggressively based on
the value of a LocationSizes (e.g. how can a store of four bytes be to
an area of storage that's only two bytes large?)
This patch makes LocationSize hold an 'imprecise' bit to note whether
the LocationSize can be treated as an upper-bound and lower-bound for
the size of a location, or just an upper-bound.
This concludes the series of patches leading up to this. The most recent
of which is r344108.
Fixes PR36228.
Differential Revision: https://reviews.llvm.org/D44748
llvm-svn: 344114
This is the second in a series of changes intended to make
https://reviews.llvm.org/D44748 more easily reviewable. Please see that
patch for more context. The first change being r344012.
Since I was requested to do all of this with post-commit review, this is
about as small as I can make this patch.
This patch makes LocationSize into an actual type that wraps a uint64_t;
users are required to call getValue() in order to get the size now. If
the LocationSize has an Unknown size (e.g. if LocSize ==
MemoryLocation::UnknownSize), getValue() will assert.
This also adds DenseMap specializations for LocationInfo, which required
taking two more values from the set of values LocationInfo can
represent. Hence, heavy users of multi-exabyte arrays or structs may
observe slightly lower-quality code as a result of this change.
The intent is for getValue()s to be very close to a corresponding
hasValue() (which is often spelled `!= MemoryLocation::UnknownSize`).
Sadly, small diff context appears to crop that out sometimes, and the
last change in DSE does require a bit of nonlocal reasoning about
control-flow. :/
This also removes an assert, since it's now redundant with the assert in
getValue().
llvm-svn: 344013
This is one of a series of changes intended to make
https://reviews.llvm.org/D44748 more easily reviewable. Please see that
patch for more context.
Since I was requested to do all of this with post-commit review, this is
about as small as I can make it (beyond committing changes to these few
files separately, but they're incredibly similar in spirit, so...)
On its own, this change doesn't make a great deal of sense. I plan on
having a follow-up Real Soon Now(TM) to make the bits here make more
sense. :)
In particular, the next change in this series is meant to make
LocationSize an actual type, which you have to call .getValue() on in
order to get at the uint64_t inside. Hence, this change refactors code
so that:
- we only need to call the soon-to-come getValue() once in most cases,
and
- said call to getValue() happens very closely to a piece of code that
checks if the LocationSize has a value (e.g. if it's != UnknownSize).
llvm-svn: 344012
In r339636 the alias analysis rules were changed with regards to tail calls
and byval arguments. Previously, tail calls were assumed not to alias
allocas from the current frame. This has been updated, to not assume this
for arguments with the byval attribute.
This patch aligns TailCallElim with the new rule. Tail marking can now be
more aggressive and mark more calls as tails, e.g.:
define void @test() {
%f = alloca %struct.foo
call void @bar(%struct.foo* byval %f)
ret void
}
define void @test2(%struct.foo* byval %f) {
call void @bar(%struct.foo* byval %f)
ret void
}
define void @test3(%struct.foo* byval %f) {
%agg.tmp = alloca %struct.foo
%0 = bitcast %struct.foo* %agg.tmp to i8*
%1 = bitcast %struct.foo* %f to i8*
call void @llvm.memcpy.p0i8.p0i8.i64(i8* %0, i8* %1, i64 40, i1 false)
call void @bar(%struct.foo* byval %agg.tmp)
ret void
}
The problematic case where a byval parameter is captured by a call is still
handled correctly, and will not be marked as a tail (see PR7272).
llvm-svn: 343986
This patch turns LoopInterchange into a loop pass. It now only
considers top-level loops and tries to move the innermost loop to the
optimal position within the loop nest. By only looking at top-level
loops, we might miss a few opportunities the function pass would get
(e.g. if we have a loop nest of 3 loops, in the function pass
we might process loops at level 1 and 2 and move the inner most loop to
level 1, and then we process loops at levels 0, 1, 2 and interchange
again, because we now have a different inner loop). But I think it would
be better to handle such cases by picking the best inner loop from the
start and avoid re-visiting the same loops again.
The biggest advantage of it being a function pass is that it interacts
nicely with the other loop passes. Without this patch, there are some
performance regressions on AArch64 with loop interchanging enabled,
where no loops were interchanged, but we missed out on some other loop
optimizations.
It also removes the SimplifyCFG run. We are just changing branches, so
the CFG should not be more complicated, besides the additional 'unique'
preheaders this pass might create.
Reviewers: chandlerc, efriedma, mcrosier, javed.absar, xbolva00
Reviewed By: xbolva00
Differential Revision: https://reviews.llvm.org/D51702
llvm-svn: 343308
This patch extends LoopInterchange to move LCSSA to the right place
after interchanging. This is required for LoopInterchange to become a
function pass.
An alternative to the manual moving of the PHIs, we could also re-form
the LCSSA phis for a set of interchanged loops, but that's more
expensive.
Reviewers: efriedma, mcrosier, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52154
llvm-svn: 343132
This reverts commit bd7b44f35ee9fbe365eb25ce55437ea793b39346.
Reland r342994: disabled the optimization and explicitly enable it in test.
-mllvm -consthoist-min-num-to-rebase<unsigned>=0
[ConstHoist] Do not rebase single (or few) dependent constant
If an instance (InsertionPoint or IP) of Base constant A has only one or few
rebased constants depending on it, do NOT rebase. One extra ADD instruction is
required to materialize each rebased constant, assuming A and the rebased have
the same materialization cost.
Differential Revision: https://reviews.llvm.org/D52243
llvm-svn: 343053
If an instance (InsertionPoint or IP) of Base constant A has only one or few
rebased constants depending on it, do NOT rebase. One extra ADD instruction is
required to materialize each rebased constant, assuming A and the rebased have
the same materialization cost.
Differential Revision: https://reviews.llvm.org/D52243
llvm-svn: 342994
Summary:
The default target of the switch instruction may sometimes be an
"unreachable" block, when it is guaranteed that one of the cases is
always taken. The dominator tree concludes that such a switch
instruction does not have an immediate post dominator. This confuses
divergence analysis, which is unable to propagate sync dependence to
the targets of the switch instruction.
As a workaround, the AMDGPU target now invokes lower-switch as a
preISel pass. LowerSwitch is designed to handle the unreachable
default target correctly, allowing the divergence analysis to locate
the correct immediate dominator of the now-lowered switch.
Reviewers: arsenm, nhaehnle
Reviewed By: nhaehnle
Subscribers: kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, llvm-commits, simoll
Differential Revision: https://reviews.llvm.org/D52221
llvm-svn: 342722
Summary:
his code was in CGDecl.cpp and really belongs in LLVM's isBytewiseValue. Teach isBytewiseValue the tricks clang's isRepeatedBytePattern had, including merging undef properly, and recursing on more types.
clang part of this patch: D51752
Subscribers: dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D51751
llvm-svn: 342709
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Made getName helper to return std::string (instead of StringRef initially) to fix
asan builtbot failures on CGSCC tests.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342664
Summary:
Before removing basic blocks that ipsccp has considered as dead
all uses of the basic block label must be removed. That is done
by calling ConstantFoldTerminator on the users. An exception
is when the branch condition is an undef value. In such
scenarios ipsccp is using some internal assumptions regarding
which edge in the control flow that should remain, while
ConstantFoldTerminator don't know how to fold the terminator.
The problem addressed here is related to ConstantFoldTerminator's
ability to rewrite a 'switch' into a conditional 'br'. In such
situations ConstantFoldTerminator returns true indicating that
the terminator has been rewritten. However, ipsccp treated the
true value as if the edge to the dead basic block had been
removed. So the code for resolving an undef branch condition
did not trigger, and we ended up with assertion that there were
uses remaining when deleting the basic block.
The solution is to resolve indeterminate branches before the
call to ConstantFoldTerminator.
Reviewers: efriedma, fhahn, davide
Reviewed By: fhahn
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52232
llvm-svn: 342632
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342597
Summary:
Pass Execution Instrumentation interface enables customizable instrumentation
of pass execution, as per "RFC: Pass Execution Instrumentation interface"
posted 06/07/2018 on llvm-dev@
The intent is to provide a common machinery to implement all
the pass-execution-debugging features like print-before/after,
opt-bisect, time-passes etc.
Here we get a basic implementation consisting of:
* PassInstrumentationCallbacks class that handles registration of callbacks
and access to them.
* PassInstrumentation class that handles instrumentation-point interfaces
that call into PassInstrumentationCallbacks.
* Callbacks accept StringRef which is just a name of the Pass right now.
There were some ideas to pass an opaque wrapper for the pointer to pass instance,
however it appears that pointer does not actually identify the instance
(adaptors and managers might have the same address with the pass they govern).
Hence it was decided to go simple for now and then later decide on what the proper
mental model of identifying a "pass in a phase of pipeline" is.
* Callbacks accept llvm::Any serving as a wrapper for const IRUnit*, to remove direct dependencies
on different IRUnits (e.g. Analyses).
* PassInstrumentationAnalysis analysis is explicitly requested from PassManager through
usual AnalysisManager::getResult. All pass managers were updated to run that
to get PassInstrumentation object for instrumentation calls.
* Using tuples/index_sequence getAnalysisResult helper to extract generic AnalysisManager's extra
args out of a generic PassManager's extra args. This is the only way I was able to explicitly
run getResult for PassInstrumentationAnalysis out of a generic code like PassManager::run or
RepeatedPass::run.
TODO: Upon lengthy discussions we agreed to accept this as an initial implementation
and then get rid of getAnalysisResult by improving RepeatedPass implementation.
* PassBuilder takes PassInstrumentationCallbacks object to pass it further into
PassInstrumentationAnalysis. Callbacks registration should be performed directly
through PassInstrumentationCallbacks.
* new-pm tests updated to account for PassInstrumentationAnalysis being run
* Added PassInstrumentation tests to PassBuilderCallbacks unit tests.
Other unit tests updated with registration of the now-required PassInstrumentationAnalysis.
Reviewers: chandlerc, philip.pfaffe
Differential Revision: https://reviews.llvm.org/D47858
llvm-svn: 342544
Summary:
Adds LLVMAddUnifyFunctionExitNodesPass to expose
createUnifyFunctionExitNodesPass to the C and OCaml APIs.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52212
llvm-svn: 342476
A piece of logic in rewriteLoopExitValues has a weird check on number of
users which allowed an unprofitable transform in case if an instruction has
more than 6 users.
Differential Revision: https://reviews.llvm.org/D51404
Reviewed By: etherzhhb
llvm-svn: 342444
Summary:
EarlyCSE can make IR changes that will leave MemorySSA with accesses claiming to be optimized, but for which a subsequent MemorySSA run will yield a different optimized result.
Due to relying on AA queries, we can't fix this in general, unless we recompute MemorySSA.
Adding some tests to track this and a basic verify for future potential failures.
Reviewers: george.burgess.iv, gberry
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D51960
llvm-svn: 342422
As preparation for LoopInterchange becoming a loop pass, it needs to
preserve ScalarEvolution. Even though interchanging should not change
the trip count of the loop, it modifies loop entry, latch and exit
blocks.
I added -verify-scev to some loop interchange tests, but the verification does
not catch problems caused by missing invalidation of SE in loop interchange, as
the trip counts themselves do not change. So there might be potential to
make the SE verification covering more stuff in the future.
Reviewers: mkazantsev, efriedma, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D52026
llvm-svn: 342209
This adds DebugCounter support to the PartiallyInlineLibCalls pass,
which should make debugging/automated bisection easier in the future.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D50093
llvm-svn: 342172
Fix for https://bugs.llvm.org/show_bug.cgi?id=38912.
In GVNHoist::computeInsertionPoints() we iterate over the Value
Numbers and calculate the Iterated Dominance Frontiers without
clearing the IDFBlocks vector first. IDFBlocks ends up accumulating
an insane number of basic blocks, which bloats the compilation time
of SemaChecking.cpp with ubsan enabled.
Differential Revision: https://reviews.llvm.org/D51980
llvm-svn: 342055
Summary:
Update MemorySSA in old LoopUnswitch pass.
Actual dependency and update is disabled by default.
Subscribers: sanjoy, jlebar, Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D45301
llvm-svn: 341984
There are 2 cases when we create PHI nodes:
* For the result of the call that was duplicated in the split blocks.
Those PHI nodes should have the debug location of the call.
* For values produced before the call. Those instructions need to be
duplicated in the split blocks and the PHI nodes should have the
debug locations of those instructions.
Fixes PR37962.
Reviewers: junbuml, gbedwell, vsk
Reviewed By: junbuml
Tags: #debug-info
Differential Revision: https://reviews.llvm.org/D51919
llvm-svn: 341970
Currently we re-use cached info from sub loops or traverse them
to populate AliasSetTracker. But after that we traverse all basic blocks
from the current loop. This is redundant work.
All what we need is traversing the all basic blocks from the loop except
those which are used to get the data from the cache.
This should improve compile time only.
Reviewers: mkazantsev, reames, kariddi, anna
Reviewed By: reames
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51715
llvm-svn: 341896
IndVarSimplify's design is somewhat odd in the way how it reports that
some transform has made a change. It has a `Changed` field which can
be set from within any function, which makes it hard to track whether or
not it was set properly after a transform was made. It leads to oversights
in setting this flag where needed, see example in PR38855.
This patch removes the `Changed` field, turns it into a local and unifies
the signatures of all relevant transform functions to return boolean value
which designates whether or not this transform has made a change.
Differential Revision: https://reviews.llvm.org/D51850
Reviewed By: skatkov
llvm-svn: 341893
I'd made exactly this same change before, but it appears to have been accidentally reverted in another change. (I'm assuming accidental since it was without comment or test case, and in an unrelated change.)
llvm-svn: 341892
When GVN propagates an equality by replacing one value with another it also
needs to invalidate the cached information for the value being replaced.
Differential Revision: https://reviews.llvm.org/D51218
llvm-svn: 341820
Currently, `rewriteFirstIterationLoopExitValues` does not set Changed flag even if it makes
changes in the IR. There is no clear evidence that it can cause a crash, but it
looks highly suspicious and likely invalid.
Differential Revision: https://reviews.llvm.org/D51779
Reviewed By: skatkov
llvm-svn: 341779
Currently, `sinkUnusedInvariants` does not set Changed flag even if it makes
changes in the IR. There is no clear evidence that it can cause a crash, but it
looks highly suspicious and likely invalid.
Differential Revision: https://reviews.llvm.org/D51777
Reviewed By: skatkov
llvm-svn: 341777
Currently eliminateInstructions only returns true if any instruction got
replaced. In the test case for this patch, we eliminate the trivially
dead calls, for which eliminateInstructions not do a replacement and the
function is not marked as changed, which is why the inliner crashes
while traversing the call graph.
Alternatively we could also change eliminateInstructions to return true
in case we mark instructions for deletion, but that's slightly more code
and doing it at the place where the replacement happens seems safer.
Fixes PR37517.
Reviewers: davide, mcrosier, efriedma, bjope
Reviewed By: bjope
Differential Revision: https://reviews.llvm.org/D51169
llvm-svn: 341651
IndVars does not set `Changed` flag when it eliminates dead instructions. As result,
it may make IR modifications and report that it has done nothing. It leads to inconsistent
preserved analyzes results.
Differential Revision: https://reviews.llvm.org/D51770
Reviewed By: skatkov
llvm-svn: 341633
There is no need to create preheaders in the analysis stage, we only
need them when adjusting the branches. Also, the only cases we need to
create our own preheaders is when they have more than 1 predecessors or
PHI nodes (even with only 1 predecessor, we could have an LCSSA phi
node). I have simplified the conditions and added some assertions to be
sure. Because we know the inner and outer loop need to be tightly
nested, it is sufficient to check if the inner loop preheader is the
outer loop header to check if we need to create a new preheader.
Reviewers: efriedma, mcrosier, karthikthecool
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D51703
llvm-svn: 341533
Function rewriteLoopExitValues contains a check on isValidRewrite which
is needed to make sure that SCEV does not convert the pattern
`gep Base, (&p[n] - &p[0])` into `gep &p[n], Base - &p[0]`. This problem
has been fixed in SCEV long ago, so this check is just obsolete.
This patch converts it into an assertion to make sure that the SCEV will
not mess up this case in the future.
Differential Revision: https://reviews.llvm.org/D51582
Reviewed By: atrick
llvm-svn: 341516
Reland r341269. Use std::stable_sort when sorting constant condidates.
Reverting commit, r341365:
Revert r341269: [Constant Hoisting] Hoisting Constant GEP Expressions
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
Original commit, r341269:
[Constant Hoisting] Hoisting Constant GEP Expressions
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
https://reviews.llvm.org/D51396
Differential Revision: https://reviews.llvm.org/D51654
llvm-svn: 341417
Recent change to deleteDeadBlocksFromLoop was not enough to
fix all the problems related to dead blocks after nontrivial
unswitching of switches.
We need to delete all the dead blocks that were created during
unswitching, otherwise we will keep having problems with phi's
or dead blocks.
This change removes all the dead blocks that are reachable from the loop,
not trying to track whether these blocks are newly created by unswitching
or not. While not completely correct, we are unlikely to get loose but
reachable dead blocks that do not belong to our loop nest.
It does fix all the failures currently known, in particular PR38778.
Reviewed By: asbirlea
Differential Revision: https://reviews.llvm.org/D51519
llvm-svn: 341398
One of the tests is failing 50% of the time when expensive checks are
enabled. Not sure how deep the problem is so just reverting while the
author can investigate so that the bots stop repeatedly failing and
blaming things incorrectly. Will respond with details on the original
commit.
llvm-svn: 341365
This patch removes the function `expandSCEVIfNeeded` which behaves not as
it was intended. This function tries to make a lookup for exact existing expansion
and only goes to normal expansion via `expandCodeFor` if this lookup hasn't found
anything. As a result of this, if some instruction above the loop has a `SCEVConstant`
SCEV, this logic will return this instruction when asked for this `SCEVConstant` rather
than return a constant value. This is both non-profitable and in some cases leads to
breach of LCSSA form (as in PR38674).
Whether or not it is possible to break LCSSA with this algorithm and with some
non-constant SCEVs is still in question, this is still being investigated. I wasn't
able to construct such a test so far, so maybe this situation is impossible. If it is,
it will go as a separate fix.
Rather than do it, it is always correct to just invoke `expandCodeFor` unconditionally:
it behaves smarter about insertion points, and as side effect of this it will choose a
constant value for SCEVConstants. For other SCEVs it may end up finding a better insertion
point. So it should not be worse in any case.
NOTE: So far the only known case for which this transform may break LCSSA is mapping
of SCEVConstant to an instruction. However there is a suspicion that the entire algorithm
can compromise LCSSA form for other cases as well (yet not proved).
Differential Revision: https://reviews.llvm.org/D51286
Reviewed By: etherzhhb
llvm-svn: 341345
If we have a pair of binops feeding another pair of binops, rearrange the operands so
the matching pair are together because that allows easy factorization folds to happen
in instcombine:
((X << S) & Y) & (Z << S) --> ((X << S) & (Z << S)) & Y (reassociation)
--> ((X & Z) << S) & Y (factorize shift from 'and' ops optimization)
This is part of solving PR37098:
https://bugs.llvm.org/show_bug.cgi?id=37098
Note that there's an instcombine version of this patch attached there, but we're trying
to make instcombine have less responsibility to improve compile-time efficiency.
For reasons I still don't completely understand, reassociate does this kind of transform
sometimes, but misses everything in my motivating cases.
This patch on its own is gluing an independent cleanup chunk to the end of the existing
RewriteExprTree() loop. We can build on it and do something stronger to better order the
full expression tree like D40049. That might be an alternative to the proposal to add a
separate reassociation pass like D41574.
Differential Revision: https://reviews.llvm.org/D45842
llvm-svn: 341288
Leverage existing logic in constant hoisting pass to transform constant GEP
expressions sharing the same base global variable. Multi-dimensional GEPs are
rewritten into single-dimensional GEPs.
Differential Revision: https://reviews.llvm.org/D51396
llvm-svn: 341269
Splitting an alloca can decrease the alignment of GEPs into the
partition. Normally, rewriting accounts for this, but the code was
missing for uses of PHI nodes and select instructions.
Fixes https://bugs.llvm.org/show_bug.cgi?id=38707 .
Differential Revision: https://reviews.llvm.org/D51335
llvm-svn: 341094
Summary:
This is patch 1 of the new DivergenceAnalysis (https://reviews.llvm.org/D50433).
The purpose of this patch is to free up the name DivergenceAnalysis for the new generic
implementation. The generic implementation class will be shared by specialized
divergence analysis classes.
Patch by: Simon Moll
Reviewed By: nhaehnle
Subscribers: jvesely, jholewinski, arsenm, nhaehnle, mgorny, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D50434
Change-Id: Ie8146b11be2c50d5312f30e11c7a3036a15b48cb
llvm-svn: 341071
rL340921 has been reverted by rL340923 due to linkage dependency
from Transform/Utils to Analysis which is not allowed. In this patch
this has been fixed, a new utility function moved to Analysis.
Differential Revision: https://reviews.llvm.org/D51152
llvm-svn: 341014
Teach LICM to hoist stores out of loops when the store writes to a location otherwise unused in the loop, writes a value which is invariant, and is guaranteed to execute if the loop is entered.
Worth noting is that this transformation is partially overlapping with the existing promotion transformation. Reasons this is worthwhile anyway include:
* For multi-exit loops, this doesn't require duplication of the store.
* It kicks in for case where we can't prove we exit through a normal exit (i.e. we may throw), but can prove the store executes before that possible side exit.
Differential Revision: https://reviews.llvm.org/D50925
llvm-svn: 340974
Summary:
Assert from PR38737 happens on the dead block inside the parent loop
after unswitching nontrivial switch in the inner loop.
deleteDeadBlocksFromLoop now takes extra care to detect/remove dead
blocks in all the parent loops in addition to the blocks from original
loop being unswitched.
Reviewers: asbirlea, chandlerc
Reviewed By: asbirlea
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D51415
llvm-svn: 340955
We have multiple places in code where we try to identify whether or not
some instruction is a guard. This patch factors out this logic into a separate
utility function which works uniformly in all places.
Differential Revision: https://reviews.llvm.org/D51152
Reviewed By: fedor.sergeev
llvm-svn: 340921
This patch creates file GuardUtils which will contain logic for work with guards
that can be shared across different passes.
Differential Revision: https://reviews.llvm.org/D51151
Reviewed By: fedor.sergeev
llvm-svn: 340914
In the PR, LoopSink was trying to sink into a catchswitch block, which
doesn't have a valid insertion point.
Differential Revision: https://reviews.llvm.org/D51307
llvm-svn: 340900
In Thumb1, legal imm range is [0, 255] for ADD/SUB instructions. However, the
legal imm range for LD/ST in (R+Imm) addressing mode is [0, 127]. Imms in
[128, 255] are materialized by mov R, #imm, and LD/STs use them in (R+R)
addressing mode.
This patch checks if a constant is used as offset in (R+Imm), if so, it checks
isLegalAddressingMode passing the constant value as BaseOffset.
Differential Revision: https://reviews.llvm.org/D50931
llvm-svn: 340882
Fix for the out-of-memory error when compiling SemaChecking.cpp
with GVNHoist and ubsan enabled. I've used a cache for inserted
CHIs to avoid excessive memory usage.
Differential Revision: https://reviews.llvm.org/D50323
llvm-svn: 340818
This is a bit awkward in a handful of places where we didn't even have
an instruction and now we have to see if we can build one. But on the
whole, this seems like a win and at worst a reasonable cost for removing
`TerminatorInst`.
All of this is part of the removal of `TerminatorInst` from the
`Instruction` type hierarchy.
llvm-svn: 340701
`isExceptionalTermiantor` and implement it for opcodes as well following
the common pattern in `Instruction`.
Part of removing `TerminatorInst` from the `Instruction` type hierarchy
to make it easier to share logic and interfaces between instructions
that are both terminators and not terminators.
llvm-svn: 340699
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
Once the invariant_start is reached, we know that no instruction *after* it can modify the memory. So, if we can prove the location isn't read *between entry into the loop and the execution of the invariant_start*, we can execute the invariant_start before entering the loop.
Differential Revision: https://reviews.llvm.org/D51181
llvm-svn: 340617
This patch makes the DoesKMove argument non-optional, to force people
to think about it. Most cases where it is false are either code hoisting
or code sinking, where we pick one instruction from a set of
equal instructions among different code paths.
Reviewers: dberlin, nlopes, efriedma, davide
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D47475
llvm-svn: 340606
When GVN sets the incoming value for a phi to undef because the incoming block
is unreachable it needs to also invalidate the cached info for that phi in
MemoryDependenceAnalysis, otherwise later queries will return stale information.
Differential Revision: https://reviews.llvm.org/D51099
llvm-svn: 340529
This version of the patch fixes cleaning up ssa_copy intrinsics, so it does not
crash for instructions in blocks that have been marked unreachable.
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
Differential Revision: https://reviews.llvm.org/D45330
llvm-svn: 340525
Summary:
Add MemorySSA as a dependency to LoopSimplifyCFG and preserve it.
Disabled by default until all passes preserve MemorySSA.
Reviewers: bogner, chandlerc
Subscribers: sanjoy, jlebar, Prazek, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D50911
llvm-svn: 340445
Summary:
Add MemorySSA as a depency to LoopInstInstSimplify and preserve it.
Disabled by default until all passes preserve MemorySSA.
Reviewers: chandlerc
Subscribers: sanjoy, jlebar, Prazek, george.burgess.iv, llvm-commits
Differential Revision: https://reviews.llvm.org/D50906
llvm-svn: 340444
Guard widening should not spend efforts on dealing with guards with trivial true/false conditions.
Such guards can easily be eliminated by any further cleanup pass like instcombine. However we
should not unconditionally delete them because it may be profitable to widen other conditions
into such guards.
Differential Revision: https://reviews.llvm.org/D50247
Reviewed By: fedor.sergeev
llvm-svn: 340381
Currently we assign the same value number to two calls reading the same
memory location if we do not have MemoryDependence info. Without MemDep
Info we cannot guarantee that there is no store between the two calls, so we
have to assign a new number to the second call.
It also adds a new option EnableMemDep to enable/disable running
MemoryDependenceAnalysis and also renamed NoLoads to NoMemDepAnalysis to
be more explicit what it does. As it also impacts calls that read memory,
NoLoads is a bit confusing.
Reviewers: efriedma, sebpop, john.brawn, wmi
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D50893
llvm-svn: 340319
Volatility is not an aliasing property. We used to model volatile as if it had extremely conservative aliasing implications, but that hasn't been true for several years now. So, it doesn't make sense to be in AliasSet.
It also turns out the code is entirely a noop. Outside of the AST code to update it, there was only one user: load store promotion in LICM. L/S promotion doesn't need the check since it walks all the users of the address anyway. It already checks each load or store via !isUnordered which causes us to bail for volatile accesses. (Look at the lines immediately following the two remove asserts.)
There is the possibility of some small compile time impact here, but the only case which will get noticeably slower is a loop with a large number of loads and stores to the same address where only the last one we inspect is volatile. This is sufficiently rare it's not worth optimizing for..
llvm-svn: 340312
This patch teaches LICM to hoist guards from the loop if they are guaranteed to execute and
if there are no side effects that could prevent that.
Differential Revision: https://reviews.llvm.org/D50501
Reviewed By: reames
llvm-svn: 340256
NewGVN uses InstructionSimplify for simplifications of leaders of
congruence classes. It is not guaranteed that the metadata or other
flags/keywords (like nsw or exact) of the leader is available for all members
in a congruence class, so we cannot use it for simplification.
This patch adds a InstrInfoQuery struct with a boolean field
UseInstrInfo (which defaults to true to keep the current behavior as
default) and a set of helper methods to get metadata/keywords for a
given instruction, if UseInstrInfo is true. The whole thing might need a
better name, to avoid confusion with TargetInstrInfo but I am not sure
what a better name would be.
The current patch threads through InstrInfoQuery to the required
places, which is messier then it would need to be, if
InstructionSimplify and ValueTracking would share the same Query struct.
The reason I added it as a separate struct is that it can be shared
between InstructionSimplify and ValueTracking's query objects. Also,
some places do not need a full query object, just the InstrInfoQuery.
It also updates some interfaces that do not take a Query object, but a
set of optional parameters to take an additional boolean UseInstrInfo.
See https://bugs.llvm.org/show_bug.cgi?id=37540.
Reviewers: dberlin, davide, efriedma, sebpop, hiraditya
Reviewed By: hiraditya
Differential Revision: https://reviews.llvm.org/D47143
llvm-svn: 340031
Summary:
Currently, in LICM, we use the alias set tracker to identify if the
instruction (we're interested in hoisting) aliases with instruction that
modifies that memory location.
This patch adds an LICM alias analysis diagnostic tool that checks the
mod ref info of the instruction we are interested in hoisting/sinking,
with every instruction in the loop. Because of O(N^2) complexity this
is now only a diagnostic tool to show the limitation we have with the
alias set tracker and is OFF by default.
Test cases show the difference with the diagnostic analysis tool, where
we're able to hoist out loads and readonly + argmemonly calls from the
loop, where the alias set tracker analysis is not able to hoist these
instructions out.
Reviewers: reames, mkazantsev, fedor.sergeev, hfinkel
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D50854
llvm-svn: 340026
Main value is just simplifying code. I'll further simply the argument handling case in a bit, but that involved a slightly orthogonal change so I went with the mildy ugly intermediate for this patch.
Note that the isSized check in the old LICM code was not carried across. It turns out that check was dead. a) no test exercised it, and b) langref and verifier had been updated to disallow unsized types used in loads.
llvm-svn: 339930
This is a second part of D49974 that handles widening of conditional branches that
have very likely `false` branch.
Differential Revision: https://reviews.llvm.org/D50040
Reviewed By: reames
llvm-svn: 339537
Try to improve the computed counts when it has been explicitly set by a pragma
or command line option. This moves the code around, so that first call to
computeUnrollCount to get a sensible count and override that if explicit unroll
and jam counts are specified.
Also added some extra debug messages for when unroll and jamming is disabled.
Differential Revision: https://reviews.llvm.org/D50075
llvm-svn: 339501
If we have an assume which is known to execute and whose operand is invariant, we can lift that into the pre-header. So long as we don't change which paths the assume executes on, this is a legal transformation. It's likely to be a useful canonicalization as other transforms only look for dominating assumes.
Differential Revision: https://reviews.llvm.org/D50364
llvm-svn: 339481
The motivating case is an otherwise dead loop with a fence in it. At the moment, this goes all the way through the optimizer and we end up emitting an entirely pointless loop on x86. This case may seem a bit contrived, but we've seen it in real code as the result of otherwise reasonable lowering strategies combined w/thread local memory optimizations (such as escape analysis).
To handle this simple case, we can teach LICM to hoist must execute fences when there is no other memory operation within the loop.
Differential Revision: https://reviews.llvm.org/D50489
llvm-svn: 339378
Summary:
LoopSimplifyCFG should update ScEv for all loops after a block is deleted.
If the deleted block "Succ" is part of L, then it is part of all parent loops, so forget topmost loop.
Reviewers: greened, mkazantsev, sanjoy
Subscribers: jlebar, javed.absar, uabelho, llvm-commits
Differential Revision: https://reviews.llvm.org/D50422
llvm-svn: 339363
This function is shared between both implementations. I am not sure if
Utils/Local.h is the best place though.
Reviewers: davide, dberlin, efriedma, xbolva00
Reviewed By: efriedma, xbolva00
Differential Revision: https://reviews.llvm.org/D47337
llvm-svn: 339138
Logic for tracking implicit control flow instructions was added to GVN to
perform PRE optimizations correctly. It appears that GVN is not the only
optimization that sometimes does PRE, so this logic is required in other
places (such as Jump Threading).
This is an NFC patch that encapsulates all ICF-related logic in a dedicated
utility class separated from GVN.
Differential Revision: https://reviews.llvm.org/D40293
llvm-svn: 339086
If there is a frequently taken branch dominated by a guard, and its condition is available
at the point of the guard, we can widen guard with condition of this branch and convert
the branch into unconditional:
guard(cond1)
if (cond2) {
// taken in 99.9% cases
// do something
} else {
// do something else
}
Converts to
guard(cond1 && cond2)
// do something
Differential Revision: https://reviews.llvm.org/D49974
Reviewed By: reames
llvm-svn: 338988
In the past, DbgInfoIntrinsic has a strong assumption that these
intrinsics all have variables and expressions attached to them.
However, it is too strong to derive the class for other debug entities.
Now, it has problems for debug labels.
In order to make DbgInfoIntrinsic as a base class for 'debug info', I
create a class for 'variable debug info', DbgVariableIntrinsic.
DbgDeclareInst, DbgAddrIntrinsic, and DbgValueInst will be derived from it.
Differential Revision: https://reviews.llvm.org/D50220
llvm-svn: 338984
Summary:
Previously, in the NewPM pipeline, TailCallElim recalculates the DomTree when it modifies any instruction in the Function.
For example,
```
CallInst *CI = dyn_cast<CallInst>(&I);
...
CI->setTailCall();
Modified = true;
...
if (!Modified || ...)
return PreservedAnalyses::all();
```
After applying this patch, the DomTree only recalculates if needed (plus an extra insertEdge() + an extra deleteEdge() call).
When optimizing SQLite with `-passes="default<O3>"` pipeline of the newPM, the number of DomTree recalculation decreases by 6.2%, the number of nodes visited by DFS decreases by 2.9%. The time used by DomTree will decrease approximately 1%~2.5% after applying the patch.
Statistics:
```
Before the patch:
23010 dom-tree-stats - Number of DomTree recalculations
489264 dom-tree-stats - Number of nodes visited by DFS -- DomTree
After the patch:
21581 dom-tree-stats - Number of DomTree recalculations
475088 dom-tree-stats - Number of nodes visited by DFS -- DomTree
```
Reviewers: kuhar, dmgreen, brzycki, grosser, davide
Reviewed By: kuhar, brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D49982
llvm-svn: 338954
Summary:
This patch is the second in a series of patches related to the [[ http://lists.llvm.org/pipermail/llvm-dev/2018-June/123883.html | RFC - A new dominator tree updater for LLVM ]].
It converts passes (e.g. adce/jump-threading) and various functions which currently accept DDT in local.cpp and BasicBlockUtils.cpp to use the new DomTreeUpdater class.
These converted functions in utils can accept DomTreeUpdater with either UpdateStrategy and can deal with both DT and PDT held by the DomTreeUpdater.
Reviewers: brzycki, kuhar, dmgreen, grosser, davide
Reviewed By: brzycki
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D48967
llvm-svn: 338814
This one requires a bit of explaination. It's not every day you simply delete code to implement an optimization. :)
The transform in question is sinking an instruction from a loop to the uses in loop exiting blocks. We know (from LCSSA) that all of the uses outside the loop must be phi nodes, and after predecessor splitting, we know all phi users must have a single operand. Since the use must be strictly dominated by the def, we know from the definition of dominance/ssa that the exit block must execute along a (non-strict) subset of paths which reach the def. As a result, duplicating a potentially faulting instruction can not *introduce* a fault that didn't previously exist in the program.
The full story is that this patch builds on "rL338671: [LICM] Factor out fault legality from canHoistOrSinkInst [NFC]" which pulled this logic out of a common helper routine. As best I can tell, this check was originally added to the helper function for hoisting legality, later an incorrect fastpath for loads/calls was added, and then the bug was fixed by duplicating the fault safety check in the hoist path. This left the redundant check in the common code to pessimize sinking for no reason. I split it out in an NFC, and am not removing the unneccessary check. I wanted there to be something easy to revert in case I missed something.
Reviewed by: Anna Thomas (in person)
llvm-svn: 338794
This method has three callers, each of which wanted distinct handling:
1) Sinking into a loop is moving an instruction known to execute before a loop into the loop. We don't need to worry about introducing a fault at all in this case.
2) Hoisting from a loop into a preheader already duplicated the check in the caller.
3) Sinking from the loop into an exit block was the only true user of the code within the routine. For the moment, this has just been lifted into the caller, but up next is examining the logic more carefully. Whitelisting of loads and calls - while consistent with the previous code - is rather suspicious. Either way, a behavior change is worthy of it's own patch.
llvm-svn: 338671
Originally, this was part of a larger refactoring I'd planned, but had to abandoned. I figured the minor improvement in readability was worthwhile.
llvm-svn: 338663
(Previously reverted in r338442)
I'm told that the breakage came from us using an x86 triple on configs
that didn't have x86 enabled. This is remedied by moving the
debugcounter test to an x86 directory (where there's also a
opt-bisect-isel.ll test for similar reasons).
I can't repro the reverse-iteration failure mentioned in the revert with
this patch, so I assume that a misconfiguration on my end is what caused
that.
Original commit message:
Add DebugCounters to DivRemPairs
For people who don't use DebugCounters, NFCI.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D50033
llvm-svn: 338653
Summary:
Fixing 2 issues with the DT update in trivial branch switching, though I don't have a case where DT update fails.
1. After splitting ParentBB->UnswitchedBB edge, new edges become: ParentBB->LoopExitBB->UnswitchedBB, so remove ParentBB->LoopExitBB edge.
2. AFAIU, for multiple CFG changes, DT should be updated using batch updates, vs consecutive addEdge and removeEdge calls.
Reviewers: chandlerc, kuhar
Subscribers: sanjoy, jlebar, llvm-commits
Differential Revision: https://reviews.llvm.org/D49925
llvm-svn: 338180
r337828 resolves a PredicateInfo issue with unnamed types.
Original message:
This patch updates IPSCCP to use PredicateInfo to propagate
facts to true branches predicated by EQ and to false branches
predicated by NE.
As a follow up, we should be able to extend it to also propagate additional
facts about nonnull.
Reviewers: davide, mssimpso, dberlin, efriedma
Reviewed By: davide, dberlin
llvm-svn: 337904
This patch makes debug counters keep track of the total number of times
we've called `shouldExecute` for each counter, so it's easier to build
automated tooling on top of these.
A patch to print these counts is coming soon.
Patch by Zhizhou Yang!
Differential Revision: https://reviews.llvm.org/D49560
llvm-svn: 337748
In ConstructSSAForLoadSet if an available value is actually the load that we're
doing SSA construction to eliminate, then we can omit it as SSAUpdate will add
in the value for the phi that will be replacing it anyway. This can result in
simpler IR which can allow further optimisation.
Differential Revision: https://reviews.llvm.org/D44160
llvm-svn: 337686
Bug fix for PR36787. When reasoning if it's safe to hoist a load we
want to make sure that the defining memory access dominates the new
insertion point of the hoisted instruction. safeToHoistLdSt calls
firstInBB(InsertionPoint,DefiningAccess) which returns false if
InsertionPoint == DefiningAccess, and therefore it falsely thinks
it's safe to hoist.
Differential Revision: https://reviews.llvm.org/D49555
llvm-svn: 337674
Max Kazantsev