llvm-objcopy previously knew nothing about data in segments that wasn't
covered by section headers, meaning that it wrote zeroes instead of what
was there. As it is possible for this data to be useful to the loader,
this patch causes llvm-objcopy to start preserving this data. Data in
sections that are explicitly removed continues to be written as zeroes.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41005.
Reviewed by: jakehehrlich, rupprecht
Differential Revision: https://reviews.llvm.org/D59483
llvm-svn: 356919
The idea of the patch is about to move out the code to a new
helper static functions (to reduce the size of 'handleArgs' and to
isolate the parts of it's logic).
Differential revision: https://reviews.llvm.org/D59762
llvm-svn: 356889
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: jhenderson, rupprecht
Subscribers: ormris, dyung, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356881
Fix: r356853 + set AddressAlign to 4 in
Inputs/compress-debug-sections.yaml for the new group section introduced.
Original commit message:
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356856
This patch fixes the reason of ubsan failure (UB detected)
happened after landing the D59638 (I had to revert it).
http://lab.llvm.org:8011/builders/sanitizer-x86_64-linux-bootstrap-ubsan/builds/11760/steps/check-llvm%20ubsan/logs/stdio)
Problem is the following. Our implementation of GroupSection assumes that
its address is 4 bytes aligned when writes it:
template <class ELFT>
void ELFSectionWriter<ELFT>::visit(const GroupSection &Sec) {
ELF::Elf32_Word *Buf =
reinterpret_cast<ELF::Elf32_Word *>(Out.getBufferStart() + Sec.Offset);
...
But the test case for D59638 did not set AddressAlign in YAML. So address was
not 4 bytes aligned since Sec.Offset was odd. That triggered the issue.
This patch teaches llvm-objcopy to report an error for such sections (which should
not met in reality), what is better than having UB.
Differential revision: https://reviews.llvm.org/D59695
llvm-svn: 356853
[Symbolizer] Add getModuleSectionIndexForAddress() helper routine
The https://reviews.llvm.org/D58194 patch changed symbolizer interface.
Particularily it requires not only Address but SectionIndex also.
Note object::SectionedAddress parameter:
Expected<DILineInfo> symbolizeCode(const std::string &ModuleName,
object::SectionedAddress ModuleOffset,
StringRef DWPName = "");
There are callers of symbolizer which do not know particular section index.
That patch creates getModuleSectionIndexForAddress() routine which
will detect section index for the specified address. Thus if caller
set ModuleOffset.SectionIndex into object::SectionedAddress::UndefSection
state then symbolizer would detect section index using
getModuleSectionIndexForAddress routine.
Differential Revision: https://reviews.llvm.org/D58848
llvm-svn: 356829
Summary:
Currently, llvm-readobj can dump symbol version sections only in LLVM style. In this patch, I would like to separate these dumpers into GNU style and
LLVM style for future implementation.
Reviewers: grimar, jhenderson, mattd, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59186
llvm-svn: 356764
Summary:
This patch adds the ability to read a yaml form of a minidump file and
write it out as binary. Apart from the minidump header and the stream
directory, only three basic stream kinds are supported:
- Text: This kind is used for streams which contain textual data. This
is typically the contents of a /proc file on linux (e.g.
/proc/PID/maps). In this case, we just put the raw stream contents
into the yaml.
- SystemInfo: This stream contains various bits of information about the
host system in binary form. We expose the data in a structured form.
- Raw: This kind is used as a fallback when we don't have any special
knowledge about the stream. In this case, we just print the stream
contents in hex.
For this code to be really useful, more stream kinds will need to be
added (particularly for things like lists of memory regions and loaded
modules). However, these can be added incrementally.
Reviewers: jhenderson, zturner, clayborg, aprantl
Subscribers: mgorny, lemo, llvm-commits, lldb-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59482
llvm-svn: 356753
Currently, llvm-objcopy incorrectly handles compression and decompression of the
sections from COMDAT groups, because we do not implement the
replaceSectionReferences for this type of the sections.
The patch does that.
Differential revision: https://reviews.llvm.org/D59638
llvm-svn: 356738
GNU objcopy can support output formats like elf32-i386-freebsd and
elf64-x86-64-freebsd. The only difference from their regular non-freebsd
counterparts that I have observed is that the freebsd versions set the
OS/ABI field to ELFOSABI_FREEBSD. This patch sets the OS/ABI field
according based on the format whenever --output-format is specified.
Reviewed by: rupprecht, grimar
Differential Revision: https://reviews.llvm.org/D59645
llvm-svn: 356737
Summary:
r354375 added support for most objdump groupings, but didn't add support for -j|--sections, because that wasn't possible.
r354870 added --disassembler options, but grouping still wasn't available.
r355185 supported values for grouped options.
This just puts the three of them together. This supports -j in modes like `-s -j .foo`, `-sj .foo`, `-sj=.foo`, or `-sj.foo`, and similar for `-M`.
Reviewers: ormris, jhenderson, ikudrin
Reviewed By: jhenderson, ikudrin
Subscribers: javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59618
llvm-svn: 356697
Summary:
This considers module symbol streams and the global symbol stream to be
roots. Most types that this considers "unreferenced" are referenced by
LF_UDT_MOD_SRC_LINE id records, which VC seems to always include.
Essentially, they are types that the user can only find in the debugger
if they call them by name, they cannot be found by traversing a symbol.
In practice, around 80% of type information in a PDB is referenced by a
symbol. That seems like a reasonable number.
I don't really plan to do anything with this tool. It mostly just exists
for informational purposes, and to confirm that we probably don't need
to implement type reference tracking in LLD. We can continue to merge
all types as we do today without wasting space.
Reviewers: zturner, aganea
Subscribers: mgorny, hiraditya, arphaman, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59620
llvm-svn: 356692
Summary:
Implements a new target features section in assembly and object files
that records what features are used, required, and disallowed in
WebAssembly objects. The linker uses this information to ensure that
all objects participating in a link are feature-compatible and records
the set of used features in the output binary for use by optimizers
and other tools later in the toolchain.
The "atomics" feature is always required or disallowed to prevent
linking code with stripped atomics into multithreaded binaries. Other
features are marked used if they are enabled globally or on any
function in a module.
Future CLs will add linker flags for ignoring feature compatibility
checks and for specifying the set of allowed features, implement using
the presence of the "atomics" feature to control the type of memory
and segments in the linked binary, and add front-end flags for
relaxing the linkage policy for atomics.
Reviewers: aheejin, sbc100, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, mgrang, jfb, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59173
llvm-svn: 356610
Summary:
This commit introduces a new AMDGPUPALMetadata class that:
* is inside the AMDGPU target;
* keeps an in-memory representation of PAL metadata;
* provides a method to read the frontend-supplied metadata from LLVM IR;
* provides methods for the asm printer to set metadata items;
* provides methods to write the metadata as a binary blob to put in a
.note record or as an asm directive;
* provides a method to read the metadata as a binary blob from a .note
record.
Because llvm-readobj cannot call directly into a target, I had to remove
llvm-readobj's ability to dump PAL metadata, pending a resolution to
https://reviews.llvm.org/D52821
Differential Revision: https://reviews.llvm.org/D57027
Change-Id: I756dc830894fcb6850324cdcfa87c0120eb2cf64
llvm-svn: 356582
If the compression was used and we had a symbol not involved in relocation,
we never updated its section and it was silently removed from the output.
Differential revision: https://reviews.llvm.org/D59542
llvm-svn: 356554
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
Original llvm-svn: 356491
llvm-svn: 356519
This adds a Remark class that allows us to share code when working with
remarks.
The C API has been updated to reflect this. Instead of the parser
generating C structs, it's now using a C++ object that is used through
opaque pointers in C. This gives us much more flexibility on what
changes we can make to the internal state of the object and interacts
much better with scenarios where the library is used through dlopen.
* C API updates:
* move from C structs to opaque pointers and functions
* the remark type is now an enum instead of a string
* unit tests updates:
* use mostly the C++ API
* keep one test for the C API
* rename to YAMLRemarksParsingTest
* a typo was fixed: AnalysisFPCompute -> AnalysisFPCommute.
* a new error message was added: "expected a remark tag."
* llvm-opt-report has been updated to use the C++ parser instead of the
C API
Differential Revision: https://reviews.llvm.org/D59049
llvm-svn: 356491
Summary:
GNU ar supports the 'N' count modifier for the extract (x) and delete (d) operations. When an archive contains multiple members with the same name, this can be used to extract (or delete) them individually. For example:
```
$ llvm-ar t archive.a
foo
foo
$ llvm-ar x archive.a
-> Writes foo twice, overwriting it the second time :( :(
$ llvm-ar xN 1 archive.a foo && mv foo foo.1
$ llvm-ar xN 2 archive.a foo && mv foo foo.2
-> Write foo twice, renaming it in between invocations to preserve all versions
```
Reviewers: ruiu, MaskRay
Reviewed By: ruiu, MaskRay
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59503
llvm-svn: 356466
As discovered in D56774 the command line gets to long, so use a response file
to give the script the libs. This change has been tested and is confirmed
working for me.
Commited on behalf of Jakob Bornecrantz.
Differential Revision: https://reviews.llvm.org/D56781
llvm-svn: 356443
This change makes linking into .build-id atomic and safe to use.
Some users under particular workflows are reporting that this races
more than half the time under particular conditions.
llvm-svn: 356404
This fixes the https://bugs.llvm.org/show_bug.cgi?id=40980.
Previously if string optimization occurred as a result of
StringTableBuilder's finalize() method, the size wasn't updated.
This hopefully also makes the interaction between sections during finalization
processes a bit more clear.
Differential revision: https://reviews.llvm.org/D59488
llvm-svn: 356371
Results in much nicer -help output:
```
$ ./bin/llvm-exegesis -help
USAGE: llvm-exegesis [options]
OPTIONS:
Color Options:
-color - Use colors in output (default=autodetect)
General options:
-enable-cse-in-irtranslator - Should enable CSE in irtranslator
-enable-cse-in-legalizer - Should enable CSE in Legalizer
Generic Options:
-help - Display available options (-help-hidden for more)
-help-list - Display list of available options (-help-list-hidden for more)
-version - Display the version of this program
llvm-exegesis analysis options:
-analysis-clustering-epsilon=<number> - dbscan epsilon for benchmark point clustering
-analysis-clusters-output-file=<string> -
-analysis-display-unstable-clusters - if there is more than one benchmark for an opcode, said benchmarks may end up not being clustered into the same cluster if the measured performance characteristics are different. by default all such opcodes are filtered out. this flag will instead show only such unstable opcodes
-analysis-inconsistencies-output-file=<string> -
-analysis-inconsistency-epsilon=<number> - epsilon for detection of when the cluster is different from the LLVM schedule profile values
-analysis-numpoints=<uint> - minimum number of points in an analysis cluster
llvm-exegesis benchmark options:
-ignore-invalid-sched-class - ignore instructions that do not define a sched class
-mode=<value> - the mode to run
=latency - Instruction Latency
=inverse_throughput - Instruction Inverse Throughput
=uops - Uop Decomposition
=analysis - Analysis
-num-repetitions=<uint> - number of time to repeat the asm snippet
-opcode-index=<int> - opcode to measure, by index
-opcode-name=<string> - comma-separated list of opcodes to measure, by name
-snippets-file=<string> - code snippets to measure
llvm-exegesis options:
-benchmarks-file=<string> - File to read (analysis mode) or write (latency/uops/inverse_throughput modes) benchmark results. “-” uses stdin/stdout.
-mcpu=<string> - cpu name to use for pfm counters, leave empty to autodetect
```
llvm-svn: 356364
yaml2obj currently derives the p_filesz, p_memsz, and p_offset values of
program headers from their sections. This makes writing tests for
certain formats more complex, and sometimes impossible. This patch
allows setting these fields explicitly, overriding the default value,
when relevant.
Reviewed by: jakehehrlich, Higuoxing
Differential Revision: https://reviews.llvm.org/D59372
llvm-svn: 356247
For ELF, we accept but ignore --only-keep-debug. Do the same for llvm-strip.
COFF does implement this, so update the test that it is supported.
llvm-svn: 356207
Summary:
CoverageExporterJson::renderFiles accounts for most of the execution time given a large profdata file with multiple binaries.
Proposed solution is to generate JSON for each file in parallel and sort at the end to preserve deterministic output. Also added flags to skip generating parts of the output to trim the output size.
Patch by Sajjad Mirza (@sajjadm).
Reviewers: Dor1s, vsk
Reviewed By: Dor1s, vsk
Subscribers: liaoyuke, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59277
llvm-svn: 356178
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
This is a reland of r356129, attempting to fix greendragon failures
due to a suspected compatibility issue with od on the greendragon bots
versus other versions.
llvm-svn: 356136
This patch changes llvm-objcopy's behaviour to not strip sections that
are in segments, if they otherwise would be due to a stripping operation
(--strip-all, --strip-sections, --strip-non-alloc). This preserves the
segment contents. It does not change the behaviour of --strip-all-gnu
(although we could choose to do so), because GNU objcopy's behaviour in
this case seems to be to strip the section, nor does it prevent removing
of sections in segments with --remove-section (if a user REALLY wants to
remove a section, we should probably let them, although I could be
persuaded that warning might be appropriate). Tests have been added to
show this latter behaviour.
This fixes https://bugs.llvm.org/show_bug.cgi?id=41006.
Reviewed by: grimar, rupprecht, jakehehrlich
Differential Revision: https://reviews.llvm.org/D59293
llvm-svn: 356129
error() was previously cleaned up from CopyConfig, but new uses were introduced.
This also tweaks the error message for --add-symbol to report all invalid flags.
llvm-svn: 356105
Summary:
MsgPackDocument is the lighter-weight replacement for MsgPackTypes. This
commit switches AMDGPU HSA metadata processing to use MsgPackDocument
instead of MsgPackTypes.
Differential Revision: https://reviews.llvm.org/D57024
Change-Id: I0751668013abe8c87db01db1170831a76079b3a6
llvm-svn: 356081
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
Original llvm-svn: 355964
llvm-svn: 355984
Currently we have -Rpass for filtering the remarks that are displayed as
diagnostics, but when using -fsave-optimization-record, there is no way
to filter the remarks while generating them.
This adds support for filtering remarks by passes using a regex.
Ex: `clang -fsave-optimization-record -foptimization-record-passes=inline`
will only emit the remarks coming from the pass `inline`.
This adds:
* `-fsave-optimization-record` to the driver
* `-opt-record-passes` to cc1
* `-lto-pass-remarks-filter` to the LTOCodeGenerator
* `--opt-remarks-passes` to lld
* `-pass-remarks-filter` to llc, opt, llvm-lto, llvm-lto2
* `-opt-remarks-passes` to gold-plugin
Differential Revision: https://reviews.llvm.org/D59268
llvm-svn: 355964
Prior to this change, the "Symbol" field of a relocation would always be
assumed to be a symbol name, and if no such symbol existed, the
relocation would reference index 0. This confused me when I tried to use
a literal symbol index in the field: since "0x1" was not a known symbol
name, the symbol index was set as 0. This change falls back to treating
unknown symbol names as integers, and emits an error if the name is not
found and the string is not an integer.
Note that the Symbol field is optional, so if a relocation doesn't
reference a symbol, it shouldn't be specified. The new error required a
number of test updates.
Reviewed by: grimar, ruiu
Differential Revision: https://reviews.llvm.org/D58510
llvm-svn: 355938
Summary:
Swift now generates PDBs for debugging on Windows. llvm and lldb
need a language enumerator value too properly handle the output
emitted by swiftc.
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59231
llvm-svn: 355882
When --compress-debug-sections is given,
llvm-objcopy removes the uncompressed sections and adds compressed to the section list.
This makes all the pointers to old sections to be outdated.
Currently, code already has logic for replacing the target sections of the relocation
sections. But we also have to update the relocations by themselves.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40885.
Differential revision: https://reviews.llvm.org/D58960
llvm-svn: 355821
Specifically, compute and Print Type and Section columns.
This is a re-commit of rL354833, after fixing the Asan problem found a a buildbot.
Differential Revision: https://reviews.llvm.org/D59060
llvm-svn: 355742
llvm-readelf prints relocation addends as:
<symbol value>[+-]<absolute addend>
where [+-] is determined from whether addend is less than zero or not.
However, it does not print the +/- if there is no symbol, which meant
that negative addends became their positive value with no indication
that this had happened. This patch stops the absolute conversion when
addends are negative and there is no associated symbol.
Reviewed by: Higuoxing, mattd, MaskRay
Differential Revision: https://reviews.llvm.org/D59095
llvm-svn: 355696
Summary:
Since bottleneck hints are enabled via user request, it can be
confusing if no bottleneck information is presented. Such is the
case when no bottlenecks are identified. This patch emits a message
in that case.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59098
llvm-svn: 355628
I need this to remove a binary from LLD test suite.
The patch also simplifies the code a bit.
Differential revision: https://reviews.llvm.org/D59082
llvm-svn: 355591
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
Original llvm-svn: 355507
llvm-svn: 355514
This allows us to store more info about where we're emitting the remarks
without cluttering LLVMContext. This is needed for future support for
the remark section.
Differential Revision: https://reviews.llvm.org/D58996
llvm-svn: 355507
We should create CompressedSection only if the section has SHF_COMPRESSED flag
or it's name starts from '.zdebug'.
Currently, we create it if section's data starts from ZLIB signature.
Differential revision: https://reviews.llvm.org/D59018
llvm-svn: 355501
Partly addresses PR15026.
There are a few tests that passed in invalid architectures, which are fixed in: rL355349 and D58931
Reviewers: echristo, efriedma, rengolin, atrick
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D58933
llvm-svn: 355455
Getting rid of the name "optimization remarks" for anything that
involves handling remarks on the client side.
It's safer to do this now, before we get stuck with that name in all the
APIs and public interfaces we decide to export to users in the future.
This renames llvm/tools/opt-remarks to llvm/tools/remarks-shlib, and now
generates `libRemarks.dylib` instead of `libOptRemarks.dylib`.
Differential Revision: https://reviews.llvm.org/D58535
llvm-svn: 355439
When --compress-debug-sections is given, llvm-objcopy do not compress
sections that have "ZLIB" header in data. Normally this signature is used
in zlib-gnu compression format. But if zlib-gnu used then the name of the compressed
section should start from .z* (e.g .zdebug_info). If it does not, then it is not
a zlib-gnu format and section should be treated as a normal uncompressed section.
Differential revision: https://reviews.llvm.org/D58908
llvm-svn: 355399
If zlib is not available, and --compress-debug-sections is passed,
we want to report an error. Currently, it is only reported for
--compress_debug_sections= form of the option.
Fixes the https://bugs.llvm.org/show_bug.cgi?id=40886.
I do not think there is a way to write a test for this.
Differential revision: https://reviews.llvm.org/D58909
llvm-svn: 355391
This patch adds a new flag named -bottleneck-analysis to print out information
about throughput bottlenecks.
MCA knows how to identify and classify dynamic dispatch stalls. However, it
doesn't know how to analyze and highlight kernel bottlenecks. The goal of this
patch is to teach MCA how to correlate increases in backend pressure to backend
stalls (and therefore, the loss of throughput).
From a Scheduler point of view, backend pressure is a function of the scheduler
buffer usage (i.e. how the number of uOps in the scheduler buffers changes over
time). Backend pressure increases (or decreases) when there is a mismatch
between the number of opcodes dispatched, and the number of opcodes issued in
the same cycle. Since buffer resources are limited, continuous increases in
backend pressure would eventually leads to dispatch stalls. So, there is a
strong correlation between dispatch stalls, and how backpressure changed over
time.
This patch teaches how to identify situations where backend pressure increases
due to:
- unavailable pipeline resources.
- data dependencies.
Data dependencies may delay execution of instructions and therefore increase the
time that uOps have to spend in the scheduler buffers. That often translates to
an increase in backend pressure which may eventually lead to a bottleneck.
Contention on pipeline resources may also delay execution of instructions, and
lead to a temporary increase in backend pressure.
Internally, the Scheduler classifies instructions based on whether register /
memory operands are available or not.
An instruction is marked as "ready to execute" only if data dependencies are
fully resolved.
Every cycle, the Scheduler attempts to execute all instructions that are ready
to execute. If an instruction cannot execute because of unavailable pipeline
resources, then the Scheduler internally updates a BusyResourceUnits mask with
the ID of each unavailable resource.
ExecuteStage is responsible for tracking changes in backend pressure. If backend
pressure increases during a cycle because of contention on pipeline resources,
then ExecuteStage sends a "backend pressure" event to the listeners.
That event would contain information about instructions delayed by resource
pressure, as well as the BusyResourceUnits mask.
Note that ExecuteStage also knows how to identify situations where backpressure
increased because of delays introduced by data dependencies.
The SummaryView observes "backend pressure" events and prints out a "bottleneck
report".
Example of bottleneck report:
```
Cycles with backend pressure increase [ 99.89% ]
Throughput Bottlenecks:
Resource Pressure [ 0.00% ]
Data Dependencies: [ 99.89% ]
- Register Dependencies [ 0.00% ]
- Memory Dependencies [ 99.89% ]
```
A bottleneck report is printed out only if increases in backend pressure
eventually caused backend stalls.
About the time complexity:
Time complexity is linear in the number of instructions in the
Scheduler::PendingSet.
The average slowdown tends to be in the range of ~5-6%.
For memory intensive kernels, the slowdown can be significant if flag
-noalias=false is specified. In the worst case scenario I have observed a
slowdown of ~30% when flag -noalias=false was specified.
We can definitely recover part of that slowdown if we optimize class LSUnit (by
doing extra bookkeeping to speedup queries). For now, this new analysis is
disabled by default, and it can be enabled via flag -bottleneck-analysis. Users
of MCA as a library can enable the generation of pressure events through the
constructor of ExecuteStage.
This patch partially addresses https://bugs.llvm.org/show_bug.cgi?id=37494
Differential Revision: https://reviews.llvm.org/D58728
llvm-svn: 355308
Add statistics for abstract origins, function, variable and parameter
locations; break the 'variable' counts down into variables and
parameters. Also update call site counting to check for
DW_AT_call_{file,line} in addition to DW_TAG_call_site.
Differential revision: https://reviews.llvm.org/D58849
llvm-svn: 355243
This was sometimes causing clang or llvm-mc to crash, and in other
cases could emit a bogus DWARF line-table header. I did an interim
patch in r352541; this patch should be a cleaner and more complete
fix, and retains the test.
Addresses PR40538.
Differential Revision: https://reviews.llvm.org/D58750
llvm-svn: 355226
Summary:
This patch will obtain the section name for symbols that refer to a section. Prior to this patch the Name field for STT_SECTIONs was blank, now it is populated.
Before:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
With this patch:
```
Symbol table '.symtab' contains 6 entries:
Num: Value Size Type Bind Vis Ndx Name
0: 0000000000000000 0 NOTYPE LOCAL DEFAULT UND
1: 0000000000000000 0 SECTION LOCAL DEFAULT 1 .text
2: 0000000000000000 0 SECTION LOCAL DEFAULT 3 .data
3: 0000000000000000 0 SECTION LOCAL DEFAULT 4 .bss
4: 0000000000000000 0 NOTYPE GLOBAL DEFAULT UND _GLOBAL_OFFSET_TABLE_
5: 0000000000000000 0 TLS GLOBAL DEFAULT UND sym
```
This fixes PR40788
Reviewers: jhenderson, rupprecht, espindola
Reviewed By: rupprecht
Subscribers: emaste, javed.absar, arichardson, MaskRay, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58796
llvm-svn: 355207
This is for tweaking SHT_SYMTAB sections.
Their sh_info contains the (number of symbols + 1) usually.
But for creating invalid inputs for test cases it would be convenient
to allow explicitly override this field from YAML.
Differential revision: https://reviews.llvm.org/D58779
llvm-svn: 355193
This patch allows all forms of values for options to be used at the end
of a group. With the fix, it is possible to follow the way GNU binutils
tools handle grouping options better. For example, the -j option can be
used with objdump in any of the following ways:
$ objdump -d -j .text a.o
$ objdump -d -j.text a.o
$ objdump -dj .text a.o
$ objdump -dj.text a.o
Differential Revision: https://reviews.llvm.org/D58711
llvm-svn: 355185
There's no reason to limit the DWARF CFI dumper to EM_386 and EM_X86_64;
ELF files could contain DWARF CFI on almost any platform (even 32-bit ARM;
NetBSD uses DWARF CFI on that platform). So start using the DWARF CFI dumper
unconditionally so that we can dump .eh_frame sections on the remaining ELF
platforms as well as in NetBSD binaries.
Differential Revision: https://reviews.llvm.org/D58761
llvm-svn: 355151
Add support for cloning DWARF expressions that contain base type DIE
references in dsymutil.
<rdar://problem/48167812>
Differential Revision: https://reviews.llvm.org/D58534
llvm-svn: 355148
Part 2 of CSPGO changes (mostly related to ProfileSummary).
Note that I use a default parameter in setProfileSummary() and getSummary().
This is to break the dependency in clang. I will make the parameter explicit
after changing clang in a separated patch.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 355131
Dsymutil gets library member information is through the ambiguous
/path/to/archive.a(member.o). The current logic we use would get
confused by additional parentheses. Using rfind mitigates this issue.
llvm-svn: 355114
Summary:
This was removed in r349068, but it is needed when llvm is compiled
using the non-default c++ standard library on a platform.
Reviewers: sylvestre.ledru, infinity0, mgorny, cuviper
Reviewed By: sylvestre.ledru
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57859
llvm-svn: 355107
This is https://bugs.llvm.org/show_bug.cgi?id=40861,
Previously llvm-readobj would print the DT_NULL sometimes
for the dynamic section that has no terminator entry.
The logic of printDynamicTable was a bit overcomplicated.
I rewrote it slightly to fix the issue and commented.
Differential revision: https://reviews.llvm.org/D58716
llvm-svn: 355073
This restores the patch that splits demangled stdin input on
non-alphanumerics. I had reverted this patch earlier because it broke
Windows build-bots. I have updated the test so that it passes on
Windows.
I was running the test from powershell and never saw the issue until I
switched to the mingw shell.
This reverts commit 628ab5c682.
llvm-svn: 355031
This reverts commit 5cd5f8f256.
The test passes on linux, but fails on the windows build-bots.
This test failure seems to be a quoting issue between my test and
FileCheck on Windows. I'm reverting this patch until I can replicate
and fix in my Windows environment.
llvm-svn: 355021
Summary:
This patch displays a hexadecimal section value (Elf_Shdr::sh_type) or section-relative offset when printing unknown sections.
Here is a subset of the output (ignoring the fields following "Type" when dumping an ELF's GNU `--section-headers` table).
Section Headers:
```
[Nr] Name Type
[16] android_rel LOOS+0x1
[17] android_rela LOOS+0x2
[27] unknown 0x1000: <unknown>
[28] loos LOOS+0
[30] hios VERSYM
[31] loproc LOPROC+0
[33] hiproc LOPROC+0xFFFFFFF
[34] louser LOUSER+0
[36] hiuser LOUSER+0x7FFFFFFF
```
As a comparison, the previous output looked something like the above, but with a blank "Type" field:
```
[Nr] Name Type
[27] unknown
[28] loos
[30] hios VERSYM
[31] loproc
[33] hiproc
[34] louser
[36] hiuser
```
This fixes PR40773
Reviewers: jhenderson, rupprecht, Bigcheese
Reviewed By: jhenderson, rupprecht, Bigcheese
Subscribers: MaskRay, Bigcheese, srhines, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58701
llvm-svn: 355014
Summary:
Before:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH 0x00000000001c2e61
```
After:
```
Dynamic Section:
NEEDED libpthread.so.0
...
NEEDED ld-linux-x86-64.so.2
RPATH $ORIGIN/../lib
```
Only a small problem here, I have no idea on choosing test case. I see there's a test
file(test/tools/llvm-objdump/private-headers-dynamic-section.test). But it has no DT_RPATH and DT_RUNPATH tags. Shall I replace the ELF file in the
Inputs dir by a new one?
Reviewers: jhenderson, grimar
Reviewed By: jhenderson
Subscribers: srhines, rupprecht, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58707
llvm-svn: 355001
Summary:
This patch attempts to replicate GNU c++-filt behavior when splitting stdin input for demangling.
Previously, cxx-filt would split input only on spaces. Each delimited item is then demangled.
From what I have tested, GNU c++filt also splits input on any character that does not make
up the mangled name (notably commas, but also a large set of non-alphanumeric characters).
This patch splits stdin input on any character that does not belong to the Itanium mangling
format (since Itanium is currently the only supported format in llvm-cxxfilt).
This is an update to PR39990
Reviewers: jhenderson, tejohnson, compnerd
Reviewed By: compnerd
Subscribers: erik.pilkington, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58416
llvm-svn: 354998
That patch is the fix for https://bugs.llvm.org/show_bug.cgi?id=40703
"wrong line number info for obj file compiled with -ffunction-sections"
bug. The problem happened with only .o files. If object file contains
several .text sections then line number information showed incorrectly.
The reason for this is that DwarfLineTable could not detect section which
corresponds to specified address(because address is the local to the
section). And as the result it could not select proper sequence in the
line table. The fix is to pass SectionIndex with the address. So that it
would be possible to differentiate addresses from various sections. With
this fix llvm-objdump shows correct line numbers for disassembled code.
Differential review: https://reviews.llvm.org/D58194
llvm-svn: 354972
llvm-readobj's error messages were broken for bad archive members. This
patch fixes them, and also adds testing for archive and thin archive
handling within llvm-readobj.
Reviewed by: rupprecht, grimar, higuoxing
Differential Revision: https://reviews.llvm.org/D58681
llvm-svn: 354960
Current PGO profile counts are not context sensitive. The branch probabilities
for the inlined functions are kept the same for all call-sites, and they might
be very different from the actual branch probabilities. These suboptimal
profiles can greatly affect some downstream optimizations, in particular for
the machine basic block placement optimization.
In this patch, we propose to have a post-inline PGO instrumentation/use pass,
which we called Context Sensitive PGO (CSPGO). For the users who want the best
possible performance, they can perform a second round of PGO instrument/use on
the top of the regular PGO. They will have two sets of profile counts. The
first pass profile will be manly for inline, indirect-call promotion, and
CGSCC simplification pass optimizations. The second pass profile is for
post-inline optimizations and code-gen optimizations.
A typical usage:
// Regular PGO instrumentation and generate pass1 profile.
> clang -O2 -fprofile-generate source.c -o gen
> ./gen
> llvm-profdata merge default.*profraw -o pass1.profdata
// CSPGO instrumentation.
> clang -O2 -fprofile-use=pass1.profdata -fcs-profile-generate -o gen2
> ./gen2
// Merge two sets of profiles
> llvm-profdata merge default.*profraw pass1.profdata -o profile.profdata
// Use the combined profile. Pass manager will invoke two PGO use passes.
> clang -O2 -fprofile-use=profile.profdata -o use
This change touches many components in the compiler. The reviewed patch
(D54175) will committed in phrases.
Differential Revision: https://reviews.llvm.org/D54175
llvm-svn: 354930
The --disassembler-options, or -M, are used to customize
the disassembler and affect its output.
The two implemented options allow selecting register names on ARM:
* With -Mreg-names-raw, the disassembler uses rNN for all registers.
* With -Mreg-names-std it prints sp, lr and pc for r13, r14 and r15,
which is the default behavior of llvm-objdump.
Differential Revision: https://reviews.llvm.org/D57680
llvm-svn: 354870
Recently, support was added to yaml2obj to allow dynamic sections to
have a list of entries, to make it easier to write tests with dynamic
sections. However, this change also removed the ability to provide
custom contents to the dynamic section, making it hard to test
malformed contents (e.g. because the section is not a valid size to
contain an array of entries). This change reinstates this. An error is
emitted if raw content and dynamic entries are both specified.
Reviewed by: grimar, ruiu
Differential Review: https://reviews.llvm.org/D58543
llvm-svn: 354770
Summary:
This reverts D50129 / rL338834: [XRay][tools] Use Support/JSON.h in llvm-xray convert
Abstractions are great.
Readable code is great.
JSON support library is a *good* idea.
However unfortunately, there is an internal detail that one needs
to be aware of in `llvm::json::Object` - it uses `llvm::DenseMap`.
So for **every** `llvm::json::Object`, even if you only store a single `int`
entry there, you pay the whole price of `llvm::DenseMap`.
Unfortunately, it matters for `llvm-xray`.
I was trying to analyse the `llvm-exegesis` analysis mode performance,
and for that i wanted to view the LLVM X-Ray log visualization in Chrome
trace viewer. And the `llvm-xray convert` is sluggish, and sometimes
even ended up being killed by OOM.
`xray-log.llvm-exegesis.lwZ0sT` was acquired from `llvm-exegesis`
(compiled with ` -fxray-instruction-threshold=128`)
analysis mode over `-benchmarks-file` with 10099 points (one full
latency measurement set), with normal runtime of 0.387s.
Timings:
Old: (copied from D58580)
```
$ perf stat -r 5 ./bin/llvm-xray convert -sort -symbolize -instr_map=./bin/llvm-exegesis -output-format=trace_event -output=/tmp/trace.yml xray-log.llvm-exegesis.lwZ0sT
Performance counter stats for './bin/llvm-xray convert -sort -symbolize -instr_map=./bin/llvm-exegesis -output-format=trace_event -output=/tmp/trace.yml xray-log.llvm-exegesis.lwZ0sT' (5 runs):
21346.24 msec task-clock # 1.000 CPUs utilized ( +- 0.28% )
314 context-switches # 14.701 M/sec ( +- 59.13% )
1 cpu-migrations # 0.037 M/sec ( +-100.00% )
2181354 page-faults # 102191.251 M/sec ( +- 0.02% )
85477442102 cycles # 4004415.019 GHz ( +- 0.28% ) (83.33%)
14526427066 stalled-cycles-frontend # 16.99% frontend cycles idle ( +- 0.70% ) (83.33%)
32371533721 stalled-cycles-backend # 37.87% backend cycles idle ( +- 0.27% ) (33.34%)
67896890228 instructions # 0.79 insn per cycle
# 0.48 stalled cycles per insn ( +- 0.03% ) (50.00%)
14592654840 branches # 683631198.653 M/sec ( +- 0.02% ) (66.67%)
212207534 branch-misses # 1.45% of all branches ( +- 0.94% ) (83.34%)
21.3502 +- 0.0585 seconds time elapsed ( +- 0.27% )
```
New:
```
$ perf stat -r 9 ./bin/llvm-xray convert -sort -symbolize -instr_map=./bin/llvm-exegesis -output-format=trace_event -output=/tmp/trace.yml xray-log.llvm-exegesis.lwZ0sT
Performance counter stats for './bin/llvm-xray convert -sort -symbolize -instr_map=./bin/llvm-exegesis -output-format=trace_event -output=/tmp/trace.yml xray-log.llvm-exegesis.lwZ0sT' (9 runs):
7178.38 msec task-clock # 1.000 CPUs utilized ( +- 0.26% )
182 context-switches # 25.402 M/sec ( +- 28.84% )
0 cpu-migrations # 0.046 M/sec ( +- 70.71% )
33701 page-faults # 4694.994 M/sec ( +- 0.88% )
28761053971 cycles # 4006833.933 GHz ( +- 0.26% ) (83.32%)
2028297997 stalled-cycles-frontend # 7.05% frontend cycles idle ( +- 1.61% ) (83.32%)
10773154901 stalled-cycles-backend # 37.46% backend cycles idle ( +- 0.38% ) (33.36%)
36199132874 instructions # 1.26 insn per cycle
# 0.30 stalled cycles per insn ( +- 0.03% ) (50.02%)
6434504227 branches # 896420204.421 M/sec ( +- 0.03% ) (66.68%)
73355176 branch-misses # 1.14% of all branches ( +- 1.46% ) (83.33%)
7.1807 +- 0.0190 seconds time elapsed ( +- 0.26% )
```
So using `llvm::json` nearly triples run-time on that test case.
(+3x is times, not percent.)
Memory:
Old:
```
total runtime: 39.88s.
bytes allocated in total (ignoring deallocations): 79.07GB (1.98GB/s)
calls to allocation functions: 33267816 (834135/s)
temporary memory allocations: 5832298 (146235/s)
peak heap memory consumption: 9.21GB
peak RSS (including heaptrack overhead): 147.98GB
total memory leaked: 1.09MB
```
New:
```
total runtime: 17.42s.
bytes allocated in total (ignoring deallocations): 5.12GB (293.86MB/s)
calls to allocation functions: 21382982 (1227284/s)
temporary memory allocations: 232858 (13364/s)
peak heap memory consumption: 350.69MB
peak RSS (including heaptrack overhead): 2.55GB
total memory leaked: 79.95KB
```
Diff:
```
total runtime: -22.46s.
bytes allocated in total (ignoring deallocations): -73.95GB (3.29GB/s)
calls to allocation functions: -11884834 (529155/s)
temporary memory allocations: -5599440 (249307/s)
peak heap memory consumption: -8.86GB
peak RSS (including heaptrack overhead): 0B
total memory leaked: -1.01MB
```
So using `llvm::json` increases *peak* memory consumption on *this* testcase ~+27x.
And total allocation count +15x. Both of these numbers are times, *not* percent.
And note that memory usage is clearly unbound with `llvm::json`, it directly depends
on the length of the log, so peak memory consumption is always increasing.
This isn't so with the dumb code, there is no accumulating memory consumption,
peak memory consumption is fixed. Naturally, that means it will handle *much*
larger logs without OOM'ing.
Readability is good, but the price is simply unacceptable here.
Too bad none of this analysis was done as part of the development/review D50129 itself.
Reviewers: dberris, kpw, sammccall
Reviewed By: dberris
Subscribers: riccibruno, hans, courbet, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58584
llvm-svn: 354764
This fixes https://bugs.llvm.org/show_bug.cgi?id=40786
("obj2yaml symbol output missing section index for SHN_ABS and SHN_COMMON symbols")
Since SHN_ABS and SHN_COMMON symbols are special, we should preserve
the st_shndx for them. The patch does this for them and the other special symbols.
The test case is based on the test provided by James Henderson at the bug page!
Differential revision: https://reviews.llvm.org/D58498
llvm-svn: 354661
Summary:
This removes calls to `error()`/`reportError()` in the main driver (llvm-objcopy.cpp) as well as the associated argv-parsing (CopyConfig.cpp). `logAllUnhandledErrors()` is now the main way to print errors.
There are still a few uses from within the per-arch drivers, so we can't delete them yet... but almost!
Reviewers: jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, jakehehrlich, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58316
llvm-svn: 354600
Summary:
Removing a large number of sections from a file with a lot of symbols can have abysmal (i.e. O(n^2)) performance, e.g. when running `--only-section` to extract one section out of a large file.
This comes from iterating over all symbols in the symbol table each time we remove a section, to remove references to the section we just removed.
Instead, do just one pass of symbol removal by passing a hash set of all the sections we'd like to remove references to.
This fixes a regression when running llvm-objcopy -j <one section> on an object file with many sections and symbols -- on my machine, running `objcopy -j .keep_me huge-input.o /tmp/foo.o` takes .3s with GNU objcopy, 1.3s with an updated llvm-objcopy, and 7+ minutes with llvm-objcopy prior to this patch.
Reviewers: MaskRay, jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: MaskRay, jhenderson
Subscribers: echristo, emaste, arichardson, mgrang, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58296
llvm-svn: 354597
Summary:
This is to be consistent with the display of other MIPS section types.
This string is also used by binutils-gdb/binutils/readelf.c:get_mips_section_type_name
Since we are here, reorder the two enum constatns because SHT_MIPS_DWARF < SHT_MIPS_ABIFLAGS.
Reviewers: jhenderson, atanasyan
Reviewed By: jhenderson
Subscribers: aprantl, sdardis, arichardson, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58496
llvm-svn: 354571
This patch adds a lookup table to speed up resource queries in the ResourceManager.
This patch also moves helper function 'getResourceStateIndex()' from
ResourceManager.cpp to Support.h, so that we can reuse that logic in the
SummaryView (and potentially other views in llvm-mca).
No functional change intended.
llvm-svn: 354470
Summary:
Rename MemoryIndex to InitFlags and implement logic for determining
data segment layout in ObjectYAML and MC. Also adds a "passive" flag
for the .section assembler directive although this cannot be assembled
yet because the assembler does not support data sections.
Reviewers: sbc100, aardappel, aheejin, dschuff
Subscribers: jgravelle-google, hiraditya, sunfish, rupprecht, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57938
llvm-svn: 354397
The patch adds support for --hash-filenames to llvm-cov. This option adds md5
hash of the source path to the name of the generated .gcov file. The option is
crucial for cases where you have multiple files with the same name but can't
use --preserve-paths as resulting filenames exceed the limit.
from gcov(1):
```
-x
--hash-filenames
By default, gcov uses the full pathname of the source files to to
create an output filename. This can lead to long filenames that
can overflow filesystem limits. This option creates names of the
form source-file##md5.gcov, where the source-file component is
the final filename part and the md5 component is calculated from
the full mangled name that would have been used otherwise.
```
Patch by Igor Ignatev!
Differential Revision: https://reviews.llvm.org/D58370
llvm-svn: 354379
- Tests that use multiple short switches now test them grouped and ungrouped.
- Ensure the output of ungrouped and grouped variants is identical
Differential Revision: https://reviews.llvm.org/D57904
llvm-svn: 354375
Fix:
Replace
assert(!IO.getContext() && "The IO context is initialized already");
with
assert(IO.getContext() && "The IO context is not initialized");
(this was introduced in r354329, where I tried to quickfix the darwin BB
and seems copypasted the assert from the wrong place).
Original commit message:
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
llvm-svn: 354335
The section is described here:
https://refspecs.linuxfoundation.org/LSB_1.3.0/gLSB/gLSB/symverrqmts.html
Patch just teaches obj2yaml/yaml2obj to dump and parse such sections.
We did the finalization of string tables very late,
and I had to move the logic to make it a bit earlier.
That was needed in this patch since .gnu.version_r adds strings to .dynstr.
This might also be useful for implementing other special sections.
Everything else changed in this patch seems to be straightforward.
Differential revision: https://reviews.llvm.org/D58119
llvm-svn: 354328
This is for -D -reloc combination.
With this patch, we do not skip the zero bytes that have a relocation against
them when -reloc is used. If -reloc is not used, then the behavior will be the same.
Differential revision: https://reviews.llvm.org/D58174
llvm-svn: 354319
Summary:
This change fixes the `-no-llvm-bc` flag to work with object files within
archives. Currently the `-no-llvm-bc` flag works for regular object files, but
not static libraries, where it continues to show bitcode symbol info.
Original support was added in D4371.
Reviewers: compnerd, smeenai, pcc
Reviewed By: compnerd
Subscribers: rupprecht, keith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D48798
llvm-svn: 354196
Summary:
GNU ar has a `P` modifier that changes filename comparisons to use full paths instead of the basename. As noted in the GNU docs, regular archives are not created with full path names, so P is used to deal with archives created by other archive programs (e.g. see the updated `absolute-paths.test` test case).
Since thin archives use full path names -- paths are relative to the archive -- it seems very error prone to not imply P when dealing with thin archives, so P is implied in those cases. (I think this is a deviation from GNU ar that makes sense).
This fixes PR37436 via https://github.com/ClangBuiltLinux/linux/issues/33.
Reviewers: mstorsjo, pcc, ruiu, davide, david2050, rnk
Subscribers: tpimh, llvm-commits, nickdesaulniers
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57927
llvm-svn: 354044
Summary:
When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, when flattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
Reviewers: mstorsjo, pcc, ruiu, davide, david2050, inglorion
Reviewed By: ruiu
Subscribers: void, jdoerfert, tpimh, mgorny, hans, nickdesaulniers, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57842
llvm-svn: 353995
The DWARF standard says that an empty compile unit is not valid:
> Each such contribution consists of a compilation unit header (see
> Section 7.5.1.1 on page 200) followed by a single DW_TAG_compile_unit or
> DW_TAG_partial_unit debugging information entry, together with its
> children.
Therefore we shouldn't clone them in dsymutil.
Differential revision: https://reviews.llvm.org/D57979
llvm-svn: 353903
Summary:
An empty dwo_id indicates a degenerate .dwo file that should not have been generated in the first place. Instead of discovering this error later when merging with another degenerate .dwo file, print an error immediately when noticing an unset dwo_id, including the filename of the offending file.
Test case created by compiling a trivial file w/ `-fno-split-dwarf-inlining -gmlt -gsplit-dwarf -c` prior to r353771
Reviewers: dblaikie
Reviewed By: dblaikie
Subscribers: jdoerfert, aprantl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58085
llvm-svn: 353846
ELFYAML.h contains a `Section` class which is a base for a few other
sections classes that are used for mapping different section types.
`Section` has a `StringRef Info` field used for storing sh_info.
At the same time, sh_info has very different meanings for sections and
cannot be processed in a similar way generally,
for example ELFDumper does not handle it in `dumpCommonSection`
but do that in `dumpGroup` and `dumpCommonRelocationSection` respectively.
At this moment, we have and handle it as a string, because that was possible for
the current use case. But also it can simply be a number:
For SHT_GNU_verdef is "The number of version definitions within the section."
The patch moves `Info` field out to be able to have it as a number.
With that change, each class will be able to decide what type and purpose
of the sh_info field it wants to use.
I also had to edit 2 test cases. This is because patch fixes a bug. Previously we
accepted yaml files with Info fields for all sections (for example, for SHT_DYNSYM too).
But we do not handle it and the resulting objects had zero sh_info fields set for
such sections. Now it is accepted only for sections that supports it.
Differential revision: https://reviews.llvm.org/D58054
llvm-svn: 353810
Summary:
Originally, llvm-cxxfilt would treat a line as a single mangled item to be demangled.
If a mangled name appears in the middle of that string, that name would not be demangled.
GNU c++filt splits and demangles every word in a string that is piped to it via stdin.
Prior to this patch llvm-cxxfilt would never split strings piped to it.
This patch replicates the GNU behavior and splits strings that are piped to it via stdin.
This fixes PR39990
Reviewers: compnerd, jhenderson, davide
Reviewed By: compnerd, jhenderson
Subscribers: erik.pilkington, jhenderson, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57350
llvm-svn: 353743
Summary:
rL189250 added a realpath call, and rL352916 because realpath breaks assumptions with some build systems. However, the /usr/lib/debug case has been clarified, falling back to /usr/lib/debug is currently broken if the obj passed in is a relative path. Adding a call to use absolute paths when falling back to /usr/lib/debug fixes that while still not making any realpath assumptions.
This also adds a --fallback-debug-path command line flag for testing (since we probably can't write to /usr/lib/debug from buildbot environments), but was also verified manually:
```
$ rm -f path/to/dwarfdump-test.elf-x86-64
$ strace llvm-symbolizer --obj=relative/path/to/dwarfdump-test.elf-x86-64.debuglink 0x40113f |& grep dwarfdump
```
Lookups went to relative/path/to/dwarfdump-test.elf-x86-64, relative/path/to/.debug/dwarfdump-test.elf-x86-64, and then finally /usr/lib/debug/absolute/path/to/dwarfdump-test.elf-x86-64.
Reviewers: dblaikie, samsonov
Reviewed By: dblaikie
Subscribers: krytarowski, aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57916
llvm-svn: 353730
This was introduced by me in r353613.
I tried to fix Big-endian bot and replaced
uintX_t -> ELFT::Xword. But ELFT::Xword is a packed<uint64_t>,
so it is always 8 bytes and that was obviously incorrect.
My intention was to use something like packed<uint> actually, which
size is target dependent.
Patch fixes this bug and adds a test case, since no bots seems reported this.
llvm-svn: 353636
Fixes errors like:
/home/ssglocal/clang-cmake-x86_64-sde-avx512-linux/clang-cmake-x86_64-sde-avx512-linux/llvm/tools/yaml2obj/yaml2elf.cpp:597:5: error: need ‘typename’ before ‘ELFT:: Xword’ because ‘ELFT’ is a dependent scope
ELFT::Xword Tag = (ELFT::Xword)DE.Tag;
llvm-svn: 353614
This teaches the tools to parse and dump
the .dynamic section and its dynamic tags.
Differential revision: https://reviews.llvm.org/D57691
llvm-svn: 353606
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
This broke the Chromium build on Windows, see https://crbug.com/930058
> Summary:
> When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, whe
> lattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
>
> As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
>
> This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
>
> Reviewers: mstorsjo, pcc, ruiu, davide, david2050
>
> Subscribers: hiraditya, llvm-commits
>
> Tags: #llvm
>
> Differential Revision: https://reviews.llvm.org/D57842
This reverts commit bf990ab5aa.
llvm-svn: 353507
DW_TAG_subprogram DIEs should not be counted in the inlined function statistic. This also addresses the source variables count, as that uses the inlined function count in its calculations.
Differential revision: https://reviews.llvm.org/D57849
llvm-svn: 353491
Add a flag to allow symbols to have a wasm import name which differs from the
linker symbol name, allowing the linker to link code using the import_module
attribute.
This is the MC/Object portion of the patch.
Differential Revision: https://reviews.llvm.org/D57632
llvm-svn: 353474
Summary:
When adding one thin archive to another, we currently chop off the relative path to the flattened members. For instance, when adding `foo/child.a` (which contains `x.txt`) to `parent.a`, when flattening it we should add it as `foo/x.txt` (which exists) instead of `x.txt` (which does not exist).
As a note, this also undoes the `IsNew` parameter of handling relative paths in r288280. The unit test there still passes.
This was reported as part of testing the kernel build with llvm-ar: https://patchwork.kernel.org/patch/10767545/ (see the second point).
Reviewers: mstorsjo, pcc, ruiu, davide, david2050
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57842
llvm-svn: 353424
When type streams with forward references were merged using GHashes, cycles
were introduced in the debug info. This was caused by
GlobalTypeTableBuilder::insertRecordAs() not inserting the record on the second
pass, thus yielding an empty ArrayRef at that record slot. Later on, upon PDB
emission, TpiStreamBuilder::commit() would skip that empty record, thus
offseting all indices that came after in the stream.
This solution comes in two steps:
1. Fix the hash calculation, by doing a multiple-step resolution, iff there are
forward references in the input stream.
2. Fix merge by resolving with multiple passes, therefore moving records with
forward references at the end of the stream.
This patch also adds support for llvm-readoj --codeview-ghash.
Finally, fix dumpCodeViewMergedTypes() which previously could reference deleted
memory.
Fixes PR40221
Differential Revision: https://reviews.llvm.org/D57790
llvm-svn: 353412
This allows limiting the displayed remarks to the ones with names
matching the filter (regular) expression.
Generating html pages for a larger project with optimization remarks can
result in a huge HTML documents and using --filter allows to focus on a
set of interesting remarks.
Reviewers: hfinkel, anemet, thegameg, serge-sans-paille
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D57827
llvm-svn: 353322
A fallible iterator is one whose increment or decrement operations may fail.
This would usually be supported by replacing the ++ and -- operators with
methods that return error:
class MyFallibleIterator {
public:
// ...
Error inc();
Errro dec();
// ...
};
The downside of this style is that it no longer conforms to the C++ iterator
concept, and can not make use of standard algorithms and features such as
range-based for loops.
The fallible_iterator wrapper takes an iterator written in the style above
and adapts it to (mostly) conform with the C++ iterator concept. It does this
by providing standard ++ and -- operator implementations, returning any errors
generated via a side channel (an Error reference passed into the wrapper at
construction time), and immediately jumping the iterator to a known 'end'
value upon error. It also marks the Error as checked any time an iterator is
compared with a known end value and found to be inequal, allowing early exit
from loops without redundant error checking*.
Usage looks like:
MyFallibleIterator I = ..., E = ...;
Error Err = Error::success();
for (auto &Elem : make_fallible_range(I, E, Err)) {
// Loop body is only entered when safe.
// Early exits from loop body permitted without checking Err.
if (SomeCondition)
return;
}
if (Err)
// Handle error.
* Since failure causes a fallible iterator to jump to end, testing that a
fallible iterator is not an end value implicitly verifies that the error is a
success value, and so is equivalent to an error check.
Reviewers: dblaikie, rupprecht
Subscribers: mgorny, dexonsmith, kristina, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57618
llvm-svn: 353237
Change the format type of Dyn.SONameOffset to PRIx64 since it is a uint64_t.
The problem was detected on mips builds, where it was printing junk values
and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D57676
llvm-svn: 353225
Summary:
The following patch adds the "None" line to the section to segment mapping dump.
That line lists the sections that do not belong to any segment.
I realize that this change differs from GNU readelf which does not display the latter information.
I'd rather not add this "feature" under a command line option. I think that might introduce confusion, since users would have to
make an additional decision as to if they want to see all of the section-to-segment map or just a subset of it.
Another option is to only print the "None" line if the `--section-mapping` option is passed; however,
that might also introduce some confusion, because the section-to-segment map would be different between`--program-headers`
and the `--section-mapping` output. While the difference is just the "None" line, it seems that if we choose to display
the segment-to-section mapping, then we should always display the whole map including the sections
that do not belong to segments.
```
Section to Segment mapping:
Segment Sections...
00
01 .interp
02 .interp .note.ABI-tag .gnu.hash
03 .init_array .fini_array .dynamic
04 .dynamic
05 .note.ABI-tag
06 .eh_frame_hdr
07
08 .init_array .fini_array .dynamic .got
None .comment .symtab .strtab .shstrtab <--- THIS LINE
```
Reviewers: grimar, rupprecht, jhenderson, espindola
Reviewed By: rupprecht
Subscribers: khemant, emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57700
llvm-svn: 353217
Change the format type of Value to PRIu64 since it is a uint64_t.
The problem was detected on mips boards building 32-bit binaries,
where it was printing junk values and causing test failure.
Patch by Milos Stojanovic.
Differential Revision: https://reviews.llvm.org/D57583
llvm-svn: 353194
Summary:
Adds the standard gauntlet of accessors for global indirect functions and updates the echo test.
Now it would be nice to have a target abstraction so one could know if they have access to a suitable ELF linker and runtime.
Reviewers: whitequark, deadalnix
Reviewed By: whitequark
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56177
llvm-svn: 353193
Summary:
This patch fixes clang-tidy warnings on wasm-only files.
The list of checks used is:
`-*,clang-diagnostic-*,llvm-*,misc-*,-misc-unused-parameters,readability-identifier-naming,modernize-*`
(LLVM's default .clang-tidy list is the same except it does not have
`modernize-*`. But I've seen in multiple CLs in LLVM the modernize style
was recommended and code was fixed based on the style, so I added it as
well.)
The common fixes are:
- Variable names start with an uppercase letter
- Function names start with a lowercase letter
- Use `auto` when you use casts so the type is evident
- Use inline initialization for class member variables
- Use `= default` for empty constructors / destructors
- Use `using` in place of `typedef`
Reviewers: sbc100, tlively, aardappel
Subscribers: dschuff, sunfish, jgravelle-google, yurydelendik, kripken, MatzeB, mgorny, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57500
llvm-svn: 353075
Summary: Use StringSaver/BumpPtrAlloc when parsing lines from --keep-global-symbols files. This allows us to consistently use StringRef for driver options, which avoids copying the full strings for each object copied, as well as simplifies part of D57517.
Reviewers: jhenderson, evgeny777, alexshap
Subscribers: jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57617
llvm-svn: 353068
See https://github.com/WebAssembly/tool-conventions/pull/95.
This is less typing and IMHO more readable, and it also fits with
our naming around the binary format which tends to use the short name.
e.g.
include/llvm/BinaryFormat/Wasm.h
tools/llvm-objdump/WasmDump.cpp
etc..
Differential Revision: https://reviews.llvm.org/D57611
llvm-svn: 353062
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r353048 which in turn was a reland of
r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353053
In order to make an option value truly optional, both the ValueOptional
attribute and an empty-named value are required. Prior to this change,
this empty-named value appears in the command-line help text:
-some-option - some help text
=v1 - description 1
=v2 - description 2
= -
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
-some-option - some help text
-some-option=<value> - some help text
=v1 - description 1
=v2 - description 2
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
-some-option=<value> - some help text
=v1 - description 1
=v2
=<empty> - description
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
This is mostly a reland of r352750.
Reviewed by: ruiu, thopre, mstorsjo
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 353048
This patch removes hidden codegen flag -print-schedule effectively reverting the
logic originally committed as r300311
(https://llvm.org/viewvc/llvm-project?view=revision&revision=300311).
Flag -print-schedule was originally introduced by r300311 to address PR32216
(https://bugs.llvm.org/show_bug.cgi?id=32216). That bug was about adding "Better
testing of schedule model instruction latencies/throughputs".
These days, we can use llvm-mca to test scheduling models. So there is no longer
a need for flag -print-schedule in LLVM. The main use case for PR32216 is
now addressed by llvm-mca.
Flag -print-schedule is mainly used for debugging purposes, and it is only
actually used by x86 specific tests. We already have extensive (latency and
throughput) tests under "test/tools/llvm-mca" for X86 processor models. That
means, most (if not all) existing -print-schedule tests for X86 are redundant.
When flag -print-schedule was first added to LLVM, several files had to be
modified; a few APIs gained new arguments (see for example method
MCAsmStreamer::EmitInstruction), and MCSubtargetInfo/TargetSubtargetInfo gained
a couple of getSchedInfoStr() methods.
Method getSchedInfoStr() had to originally work for both MCInst and
MachineInstr. The original implmentation of getSchedInfoStr() introduced a
subtle layering violation (reported as PR37160 and then fixed/worked-around by
r330615).
In retrospect, that new API could have been designed more optimally. We can
always query MCSchedModel to get the latency and throughput. More importantly,
the "sched-info" string should not have been generated by the subtarget.
Note, r317782 fixed an issue where "print-schedule" didn't work very well in the
presence of inline assembly. That commit is also reverted by this change.
Differential Revision: https://reviews.llvm.org/D57244
llvm-svn: 353043
Summary:
... from 8.
`VALIGNDZ128rmbik XMM0 XMM0 K1 XMM3 RDI i_0x1 i_0x0 i_0x1` instruction already has 9 components.
It does not matter much in terms of performance, but avoiding allocation seems to come with low cost here..
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57654
llvm-svn: 353022
Summary:
Up until the point i have looked in the source, i didn't even understood that
i can disable 'cluster' output. I have always silenced it via ` &> /dev/null`.
(And hoped it wasn't contributing much of the run time.)
While i expect that it has it's use-cases i never once needed it so far.
If i forget to silence it, console is completely flooded with that output.
How about not expecting users to opt-out of analyses,
but to explicitly specify the analyses that should be performed?
Reviewers: courbet, gchatelet
Reviewed By: courbet
Subscribers: tschuett, RKSimon, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57648
llvm-svn: 353021
In llvm-nm, the symbol size was being computed only with --print-size option,
even though it was being printed in other cases, such as with --format=posix.
This patch simply removes the guard, so that the size is computed
independently of the later decision to print it or not.
Fixes PR39997.
Differential Revision: https://reviews.llvm.org/D57599
llvm-svn: 353011
This diff implements first bits for copying (without modification) MachO object files.
Test plan: make check-all
Differential revision: https://reviews.llvm.org/D54674
llvm-svn: 352944
This cleans up all LoadInst creation in LLVM to explicitly pass the
value type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57172
llvm-svn: 352911
This cleans up all CallInst creation in LLVM to explicitly pass a
function type rather than deriving it from the pointer's element-type.
Differential Revision: https://reviews.llvm.org/D57170
llvm-svn: 352909
Summary:
The following patch introduces a new function `printSectionMapping` which is responsible for dumping just the section-to-segment mapping.
This patch also introduces a n option `-section-mapping` that outputs that mapping without the program headers.
Previously, this functionality was controlled by `printProgramHeaders`, and the output from `-program-headers` has not been changed. I am happy to change the option name, I copied the name that was displayed when outputting the mapping table.
Reviewers: khemant, jhenderson, grimar, rupprecht
Reviewed By: jhenderson, grimar, rupprecht
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57365
llvm-svn: 352896
Summary:
The previous implementation reported `.comment` sections as '?'
GNU uses 'n' which means "The symbol is a debugging symbol." `.note` sections are represented as 'n' too.
The test related to this change was updated to CHECK-NEXT to ensure
order and that we did not miss any symbols in the dump.
Reviewers: jhenderson
Reviewed By: jhenderson
Subscribers: rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D57544
llvm-svn: 352891
Summary:
Replace some reportError() calls with error propagation that was missed from rL352625.
Note this also adds an error check during Archive iteration that was being hidden by a different error check before:
```
for (const Archive::Child &Child : Ar.children(Err)) {
Expected<std::unique_ptr<Binary>> ChildOrErr = Child.getAsBinary();
if (!ChildOrErr)
// This aborts, so Err is never checked
reportError(Ar.getFileName(), ChildOrErr.takeError());
```
Err is being checked after the loop, so during happy runs, everything is fine. But when reportError is changed to return the error instead of aborting, the fact that Err is never checked is now noticed in tests that trigger an error during the loop.
Reviewers: jhenderson, dblaikie, alexshap
Reviewed By: dblaikie
Subscribers: llvm-commits, lhames, jakehehrlich
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57462
llvm-svn: 352888
Recommit r352791 after tweaking DerivedTypes.h slightly, so that gcc
doesn't choke on it, hopefully.
Original Message:
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352827
This reverts commit f47d6b38c7 (r352791).
Seems to run into compilation failures with GCC (but not clang, where
I tested it). Reverting while I investigate.
llvm-svn: 352800
The FunctionCallee type is effectively a {FunctionType*,Value*} pair,
and is a useful convenience to enable code to continue passing the
result of getOrInsertFunction() through to EmitCall, even once pointer
types lose their pointee-type.
Then:
- update the CallInst/InvokeInst instruction creation functions to
take a Callee,
- modify getOrInsertFunction to return FunctionCallee, and
- update all callers appropriately.
One area of particular note is the change to the sanitizer
code. Previously, they had been casting the result of
`getOrInsertFunction` to a `Function*` via
`checkSanitizerInterfaceFunction`, and storing that. That would report
an error if someone had already inserted a function declaraction with
a mismatching signature.
However, in general, LLVM allows for such mismatches, as
`getOrInsertFunction` will automatically insert a bitcast if
needed. As part of this cleanup, cause the sanitizer code to do the
same. (It will call its functions using the expected signature,
however they may have been declared.)
Finally, in a small number of locations, callers of
`getOrInsertFunction` actually were expecting/requiring that a brand
new function was being created. In such cases, I've switched them to
Function::Create instead.
Differential Revision: https://reviews.llvm.org/D57315
llvm-svn: 352791
Summary:
Previously, llvm-nm would report symbols for .debug and .note sections as: '?' with an empty section name:
```
00000000 ?
00000000 ?
...
```
With this patch the output more closely resembles GNU nm:
```
00000000 N .debug_abbrev
00000000 n .note.GNU-stack
...
```
This patch calls `getSectionName` for sections that belong to symbols of type `ELF::STT_SECTION`, which returns the name of the section from the section string table.
Reviewers: Bigcheese, davide, jhenderson
Reviewed By: davide, jhenderson
Subscribers: rupprecht, jhenderson, llvm-commits
Differential Revision: https://reviews.llvm.org/D57105
llvm-svn: 352785
Summary:
Include the symbol being defined in the list of requirements for using --localize-symbol.
This is used, for example, when someone is depending on two different projects that have the same (or close enough) method defined in each library, and using "-L sym" for a conflicting symbol in one of the libraries so that the definition from the other one is used. However, the library may have internal references to the symbol, which cause program crashes when those are used, i.e.:
```
$ cat foo.c
int foo() { return 5; }
$ cat bar.c
int foo();
int bar() { return 2 * foo(); }
$ cat foo2.c
int foo() { /* Safer implementation */ return 42; }
$ cat main.c
int bar();
int main() {
__builtin_printf("bar = %d\n", bar());
return 0;
}
$ ar rcs libfoo.a foo.o bar.o
$ ar rcs libfoo2.a foo2.o
# Picks the wrong foo() impl
$ clang main.o -lfoo -lfoo2 -L. -o main
# Picks the right foo() impl
$ objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
# Links somehow, but crashes at runtime
$ llvm-objcopy -L foo libfoo.a && clang main.o -lfoo -lfoo2 -L. -o main
```
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57417
llvm-svn: 352767
In order to make an option value truly optional, both the ValueOptional
and an empty-named value are required. This empty-named value appears in
the command-line help text, which is not ideal.
This change improves the help text for these sort of options in a number
of ways:
1) ValueOptional options with an empty-named value now print their help
text twice: both without and then with '=<value>' after the name. The
latter version then lists the allowed values after it.
2) Empty-named values with no help text in ValueOptional options are not
listed in the permitted values.
3) Otherwise empty-named options are printed as =<empty> rather than
simply '='.
4) Option values without help text do not have the '-' separator
printed.
It also tweaks the llvm-symbolizer -functions help text to not print a
trailing ':' as that looks bad combined with 1) above.
Reviewed by: thopre, ruiu
Differential Revision: https://reviews.llvm.org/D57030
llvm-svn: 352750
Summary:
This adds support for the --discard-locals flag, which acts similarly to --discard-all, except it only applies to compiler-generated symbols (i.e. symbols starting with `.L` in ELF).
I am not sure about COFF local symbols: those appear to also use `.L` in most cases, but also use just `L` in other cases, so for now I am just leaving it unimplemented there.
Fixes PR36160
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Reviewed By: jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57248
llvm-svn: 352626
Summary: Do some more error cleanup, removing some dependencies from llvm-objcopy's error/reportError in [ELF/COFF]Objcopy methods.
Reviewers: jhenderson, alexshap, jakehehrlich, mstorsjo, espindola
Subscribers: emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57423
llvm-svn: 352625
We have a Field struct which has a StringRef member Str.
The code needs to create and keep alive the temporarily
std::string variables because of that.
That is not convenient and makes the code be more complicated
than it could be.
There seems to be no reason to keep Str be StringRef.
The patch changes it to be std::string and
rearranges the code around slightly.
Differential revision: https://reviews.llvm.org/D57447
llvm-svn: 352623
Summary:
This patch fixes access to fpo streams in native pdb from DbiStream and makes
code consistent with DbiStreamBuilder.
Patch By: leonid.mashinskiy
Reviewers: zturner, aleksandr.urakov
Reviewed By: zturner
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56725
llvm-svn: 352615
Summary:
--set-section-flags is used to change the section flags (e.g. SHF_ALLOC) for given sections. The flags allowed are the same from the existing --rename-section=.old=.new[,flags] feature.
Additionally, make sure that --set-section-flag cannot be used with --rename-section (either the source or destination), since --rename-section accepts flags. This avoids ambiguity for something like "--rename-section=.foo=.bar,alloc --set-section-flag=.bar,code".
Reviewers: jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: jhenderson, jakehehrlich
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D57198
llvm-svn: 352505
They were breaking the Windows build when using MSBuild, see the
discussion on D56781.
r351833: "Use response file when generating LLVM-C.dll"
> Use response file when generating LLVM-C.dll
>
> As discovered in D56774 the command line gets to long, so use a response file to give the script the libs. This change has been tested and is confirmed working for me.
>
> Commited on behalf of Jakob Bornecrantz
>
> Differential Revision: https://reviews.llvm.org/D56781
r352250: "Build LLVM-C.dll by default on windows and enable in release package"
> Build LLVM-C.dll by default on windows and enable in release package
>
> With the fixes to the building of LLVM-C.dll in D56781 this should now
> be safe to land. This will greatly simplify dealing with LLVM for people
> that just want to use the C API on windows. This is a follow up from
> D35077.
>
> Patch by Jakob Bornecrantz!
>
> Differential revision: https://reviews.llvm.org/D56774
llvm-svn: 352492
Seems when committed the r352366
("[llvm-objdump] - Print LMAs when dumping section headers.")
I resolved merge conflict incorrectly and removed this piece by mistake.
Bots did not catch this yet, seems they are slow today,
but the `X86/adjust-vma.test` test case fails locally for me without that.
llvm-svn: 352383
I faced with the fact that obj2yaml does not dump the sh_entsize field.
A problem arose when I tried to dump ELF versioning sections.
This is close to what D50235 did, but D50235 did the change for yaml2obj, and now
I had to do the same for obj2yaml.
Differential revision: https://reviews.llvm.org/D57229
llvm-svn: 352373
Summary: When using llvm-objcopy -O binary and the resulting file will be empty (e.g. removing the only section that would be written, or using --only-keep with a section that doesn't exist/isn't SHF_ALLOC), we crash because FileOutputBuffer expects Size > 0. Add a regression test, and change Buffer to open/truncate the output file in this case.
Reviewers: alexshap, jhenderson, jakehehrlich, espindola
Reviewed By: alexshap, jhenderson
Subscribers: jfb, llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56806
llvm-svn: 352371
When --section-headers is used, GNU objdump prints both LMA and VMA for sections.
llvm-objdump does not do that what makes it's output be slightly inconsistent.
Patch teaches llvm-objdump to print LMA/VMA for ELF file formats.
The behavior for other formats remains unchanged.
Differential revision: https://reviews.llvm.org/D57146
llvm-svn: 352366
GNU objdump's help says: "--adjust-vma: Add OFFSET to all displayed section addresses"
In real life what it does is a bit more complicated
(and IMO not always reasonable. For example, GNU objdump prints not only VMA, but also LMA
for sections. And with --adjust-vma it adjusts LMA, but only when a section has relocations.
llvm-objsump does not seem to support printing LMAs yet, but GNU's logic anyways does not
make sense for me here).
This patch tries to adjust VMA. I tried to implement a reasonable approach.
I am not adjusting sections that are not allocatable. As, for example, adjusting debug sections
VA's and rel[a] sections VA's should not make sense. This behavior seems to be GNU compatible.
Differential revision: https://reviews.llvm.org/D57051
llvm-svn: 352347
N_FUNC_COLD is a new MachO symbol attribute. It's a hint to the linker
to order a symbol towards the end of its section, to improve locality.
Example:
```
void a1() {}
__attribute__((cold)) void a2() {}
void a3() {}
int main() {
a1();
a2();
a3();
return 0;
}
```
A linker that supports N_FUNC_COLD will order _a2 to the end of the text
section. From `nm -njU` output, we see:
```
_a1
_a3
_main
_a2
```
Differential Revision: https://reviews.llvm.org/D57190
llvm-svn: 352227
This patch adds support for displaying remarks with multiple
lines. For such remarks, it creates a hidden div
containing the message's lines except the first one in a <pre>
tag. It also prepends a link (with '+' as text) to the regular remark
line. This link can be used to show/hide the div containing the
full remark.
In combination with D57159, this allows for better displaying of
multiline remarks in the html pages generated by opt-viewer.
The Javascript is very simple and should be supported by any recent
major browser.
Reviewers: hfinkel, anemet, thegameg, serge-sans-paille
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D57167
llvm-svn: 352223
If a stack trace or similar has a list of addresses from an executable
or DSO loaded at a variable address (e.g. due to ASLR), the addresses
will not directly correspond to the addresses stored in the object file.
If a user wishes to use llvm-symbolizer, they have to subtract the load
address from every address. This is somewhat inconvenient, especially as
the output of --print-address will result in the adjusted address being
listed, rather than the address coming from the stack trace, making it
harder to map results between the two.
This change adds a new switch to llvm-symbolizer --adjust-vma which
takes an offset, which is then used to automatically do this
calculation. The printed address remains the input address (allowing for
easy mapping), whilst the specified offset is applied to the addresses
when performing the lookup.
The switch is conceptually similar to llvm-objdump's new switch of the
same name (see D57051), which in turn mirrors a GNU switch. There is no
equivalent switch in addr2line.
Reviewed by: grimar
Differential Revision: https://reviews.llvm.org/D57151
llvm-svn: 352195
This change adds an option -g to llvm-objcopy which is an alias for the existing option --strip-debug.
This fixes PR40003.
Reviewed by: alexshap
Differential Revision: https://reviews.llvm.org/D57217
llvm-svn: 352182
This patch adds initial support for reading dynamic symbols from ELF binaries. Currently, STT_NOTYPE, STT_OBJECT, STT_FUNC, and STT_TLS are explicitly supported. Other symbol types are mapped to ELFSymbolType::Unknown to improve signal/noise ratio.
Symbols must meet two criteria to be read into in an ELFStub:
- The symbol's binding must be STB_GLOBAL or STB_WEAK.
- The symbol's visibility must be STV_DEFAULT or STV_PROTECTED.
This filters out symbols that aren't of interest during compile-time linking against a shared object.
This change uses DT_HASH and DT_GNU_HASH to determine the size of .dynsym. Using hash tables to determine the number of symbols in .dynsym allows llvm-elfabi to work on binaries without relying on section headers.
Differential Revision: https://reviews.llvm.org/D56031
llvm-svn: 352121
PDBs contain several serialized hash tables. In the microsoft-pdb
repo published to support LLVM implementing PDB support, the
provided initializes the bucket count for the TPI and IPI streams
to the maximum size. This occurs in tpi.cpp L33 and tpi.cpp L398.
In the LLVM code for generating PDBs, these streams are created with
minimum number of buckets. This difference makes LLVM generated
PDBs slower for when used for debugging.
Patch by C.J. Hebert
Differential Revision: https://reviews.llvm.org/D56942
llvm-svn: 352117
This change adds two options, -i and -inlines as aliases for the -inlining option to llvm-symbolizer to improve compatibility with the GNU addr2line utility which accepts these options.
It also modifies existing tests that use -inlining to exercise these new aliases as well.
This fixes PR40073.
Reviewed by: jhenderson, Quolyk, ruiu
Differential Revision: https://reviews.llvm.org/D57083
llvm-svn: 351999
This fixes https://bugs.llvm.org/show_bug.cgi?id=40072.
GNU addr2line's --functions switch is off by default, has a short alias
of -f, and does not take an argument. This patch changes llvm-symbolizer
to allow the second and third point (changing the default behaviour may
have negative impacts on users). If the option is missing a value, it
now treats it as "linkage".
This change does cause one previously valid command-line to behave
differently. Before --functions <value> was accepted, but now only
--functions=<value> is allowed (as well as --functions). The old
behaviour will result in the value being treated as a positional
argument.
The previous testing for --functions=short has been pulled out into a
new test that also tests the other accepted values and option formats.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D57049
llvm-svn: 351968
This patch adds a new ReadAdvance definition named ReadInt2Fpu.
ReadInt2Fpu allows x86 scheduling models to accurately describe delays caused by
data transfers from the integer unit to the floating point unit.
ReadInt2Fpu currently defaults to a delay of zero cycles (i.e. no delay) for all
x86 models excluding BtVer2. That means, this patch is only a functional change
for the Jaguar cpu model only.
Tablegen definitions for instructions (V)PINSR* have been updated to account for
the new ReadInt2Fpu. That read is mapped to the the GPR input operand.
On Jaguar, int-to-fpu transfers are modeled as a +6cy delay. Before this patch,
that extra delay was added to the opcode latency. In practice, the insert opcode
only executes for 1cy. Most of the actual latency is actually contributed by the
so-called operand-latency. According to the AMD SOG for family 16h, (V)PINSR*
latency is defined by expression f+1, where f is defined as a forwarding delay
from the integer unit to the fpu.
When printing instruction latency from MCA (see InstructionInfoView.cpp) and LLC
(only when flag -print-schedule is speified), we now need to account for any
extra forwarding delays. We do this by checking if scheduling classes declare
any negative ReadAdvance entries. Quoting a code comment in TargetSchedule.td:
"A negative advance effectively increases latency, which may be used for
cross-domain stalls". When computing the instruction latency for the purpose of
our scheduling tests, we now add any extra delay to the formula. This avoids
regressing existing codegen and mca schedule tests. It comes with the cost of an
extra (but very simple) hook in MCSchedModel.
Differential Revision: https://reviews.llvm.org/D57056
llvm-svn: 351965
In r287786, a bug was introduced into llvm-readelf where it didn't print
the static symbol table if both --symbols and --dyn-symbols were
specified, even if there was no dynamic symbol table. This is obviously
incorrect.
This patch fixes this issue, by delegating the decision of which symbol
tables should be printed to the final dumper, rather than trying to
decide in the command-line option handling layer. The decision was made
to follow the approach taken in this patch because the LLVM style dumper
uses a different order to the original GNU style behaviour (and GNU
readelf) for ELF output. Other approaches resulted in behaviour changes
for other dumpers which felt wrong. In particular, I wanted to avoid
changing the order of the output for --symbols --dyn-symbols for LLVM
style, keep what is emitted by --symbols unchanged for all dumpers, and
avoid having different orders of .dynsym and .symtab dumping for GNU
"--symbols" and "--symbols --dyn-symbols".
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D57016
llvm-svn: 351960
The aux symbols were stored in an opaque std::vector<uint8_t>,
with contents interpreted according to the rest of the symbol.
All aux symbol types but one fit in 18 bytes (sizeof(coff_symbol16)),
and if written to a bigobj, two extra padding bytes are written (as
sizeof(coff_symbol32) is 20). In the storage agnostic intermediate
representation, store the aux symbols as a series of coff_symbol16
sized opaque blobs. (In practice, all such aux symbols only consist
of one aux symbol, so this is more flexible than what reality needs.)
The special case is the file aux symbols, which are written in
potentially more than one aux symbol slot, without any padding,
as one single long string. This can't be stored in the same opaque
vector of fixed sized aux symbol entries. The file aux symbols will
occupy a different number of aux symbol slots depending on the type
of output object file. As nothing in the intermediate process needs
to have accurate raw symbol indices, updating that is moved into the
writer class.
Differential Revision: https://reviews.llvm.org/D57009
llvm-svn: 351947
Currently, disassembleObject() is a ~550 lines length function.
This patch splits it into two, where first do all helper objects initializations
and calls the second which does all the rest job.
This is a straightforward split.
Differential revision: https://reviews.llvm.org/D57020
llvm-svn: 351940
This was reverted since it broke a couple buildbots. The reason
for the breakage is not yet known, but this time, the test has
got more diagnostics added, to hopefully allow figuring out
what goes wrong.
Differential Revision: https://reviews.llvm.org/D57007
llvm-svn: 351931
Summary:
This patch changes a few methods to return Error instead of manually calling error/reportError to abort. This will make it easier to extract into a library.
Note that error() takes just a string (this patch also adds an overload that takes an Error), while reportError() takes string + [error/code]. To help unify things, use FileError to associate a given filename with an error. Note that this takes some special care (for now), e.g. calling reportError(FileName, <something that could be FileError>) will duplicate the filename. The goal is to eventually remove reportError() and have every error associated with a file to be a FileError, and just one error handling block at the tool level.
This change was suggested in D56806. I took it a little further than suggested, but completely fixing llvm-objcopy will take a couple more patches. If this approach looks good, I'll commit this and apply similar patche(s) for the rest.
This change is NFC in terms of non-error related code, although the error message changes in one context.
Reviewers: alexshap, jhenderson, jakehehrlich, mstorsjo, espindola
Reviewed By: alexshap, jhenderson
Subscribers: llvm-commits, emaste, arichardson
Differential Revision: https://reviews.llvm.org/D56930
llvm-svn: 351896
As discovered in D56774 the command line gets to long, so use a response file to give the script the libs. This change has been tested and is confirmed working for me.
Commited on behalf of Jakob Bornecrantz
Differential Revision: https://reviews.llvm.org/D56781
llvm-svn: 351833
Currently disassembleObject() is a ~550 lines length function.
This patch extracts the code that creates a section->their relocation
mapping into a new helper function to simplify/reduce it a bit.
Differential revision: https://reviews.llvm.org/D57019
llvm-svn: 351824
This was requested in the review of D57006.
Also add missing quotes around symbol names in error messages.
Differential Revision: https://reviews.llvm.org/D57014
llvm-svn: 351799
In r287786, the behaviour of --dyn-symbols in llvm-readelf (but not
llvm-readobj) was changed to print the dynamic symbols as derived from
the hash table, rather than to print the dynamic symbol table contents
directly. The original change was initially submitted without review,
and some comments were made on the commit mailing list implying that the
new behavious is GNU compatible. I argue that it is not:
1) It does not include a null symbol.
2) It prints the symbols based on an order derived from the hash
table.
3) It prints an extra column indicating which bucket it came from.
This could break parsers that expect a fixed number of columns,
with the first column being the symbol index.
4) If the input happens to have both .hash and .gnu.hash section, it
prints interpretations of them both, resulting in most symbols
being printed twice.
5) There is no way of just printing the raw dynamic symbol table,
because --symbols also prints the static symbol table.
This patch reverts the --dyn-symbols behaviour back to its old behaviour
of just printing the contents of the dynamic symbol table, similar to
what is printed by --symbols. As the hashed interpretation is still
desirable to validate the hash table, it puts it under a new switch
"--hash-symbols". This is a no-op on all output forms except for GNU
output style for ELF. If there is no hash table, it does nothing,
unlike the previous behaviour which printed the raw dynamic symbol
table, since the raw dynsym is available under --dyn-symbols.
The yaml input for the test is based on that in
test/tools/llvm-readobj/demangle.test, but stripped down to the bare
minimum to provide a valid dynamic symbol.
Note: some LLD tests needed updating. I will commit a separate patch for
those.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56910
llvm-svn: 351789
all missed!
Thanks to Alex Bradbury for pointing this out, and the fact that I never
added the intended `legacy` anchor to the developer policy. Add that
anchor too. With hope, this will cause the links to all resolve
successfully.
llvm-svn: 351731
As noted in https://bugs.llvm.org/show_bug.cgi?id=36651, the specialization for
isPodLike<std::pair<...>> did not match the expectation of
std::is_trivially_copyable which makes the memcpy optimization invalid.
This patch renames the llvm::isPodLike trait into llvm::is_trivially_copyable.
Unfortunately std::is_trivially_copyable is not portable across compiler / STL
versions. So a portable version is provided too.
Note that the following specialization were invalid:
std::pair<T0, T1>
llvm::Optional<T>
Tests have been added to assert that former specialization are respected by the
standard usage of llvm::is_trivially_copyable, and that when a decent version
of std::is_trivially_copyable is available, llvm::is_trivially_copyable is
compared to std::is_trivially_copyable.
As of this patch, llvm::Optional is no longer considered trivially copyable,
even if T is. This is to be fixed in a later patch, as it has impact on a
long-running bug (see r347004)
Note that GCC warns about this UB, but this got silented by https://reviews.llvm.org/D50296.
Differential Revision: https://reviews.llvm.org/D54472
llvm-svn: 351701
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
This installs the new developer policy and moves all of the license
files across all LLVM projects in the monorepo to the new license
structure. The remaining projects will be moved independently.
Note that I've left odd formatting and other idiosyncracies of the
legacy license structure text alone to make the diff easier to read.
Critically, note that we do not in any case *remove* the old license
notice or terms, as that remains necessary until we finish the
relicensing process.
I've updated a few license files that refer to the LLVM license to
instead simply refer generically to whatever license the LLVM project is
under, basically trying to minimize confusion.
This is really the culmination of so many people. Chris led the
community discussions, drafted the policy update and organized the
multi-year string of meeting between lawyers across the community to
figure out the strategy. Numerous lawyers at companies in the community
spent their time figuring out initial answers, and then the Foundation's
lawyer Heather Meeker has done *so* much to help refine and get us ready
here. I could keep going on, but I just want to make sure everyone
realizes what a huge community effort this has been from the begining.
Differential Revision: https://reviews.llvm.org/D56897
llvm-svn: 351631
This patch gives elfabi the ability to read DT_NEEDED entries from ELF binaries
to populate NeededLibs in TextAPI's ELFStub.
Differential Revision: https://reviews.llvm.org/D55852
llvm-svn: 351592
`SectionSymbol*` is cast from `void*` to
`std::tuple<uint64_t, StringRef, uint8_t>` in AMDGPUSymbolizer, so it has to
*be* one, not *act like* one.
llvm-svn: 351553
When -all-headers is given it is supposed to dump all headers,
but now it skips the archive headers for no reason.
The patch fixes that.
Differential revision: https://reviews.llvm.org/D56780
llvm-svn: 351547
getRelocationValueString is a dispatcher function that calls the
corresponding ELF/COFF/Wasm/MachO implementations
that currently live in the llvm-objdump.cpp file.
These implementations better be moved to ELFDump.cpp,
COFFDump.cpp and other corresponding files, to move platform specific
implementation out from the common logic.
The patch does that. Also, I had to move ToolSectionFilter helper
and SectionFilterIterator, SectionFilter to a header to make them
available across the objdump code.
Differential revision: https://reviews.llvm.org/D56842
llvm-svn: 351545
Currently llvm-objdump is inconsistent.
When -help is specified it shows no aliases except two.
Aliases are shown with -help-hidden though.
GNU objdump also prints them by default.
This patch does a change to always show all aliases
when -help is given.
Differential revision: https://reviews.llvm.org/D56853
llvm-svn: 351542
Summary:
objdump was interpreting the function header containing the locals
declaration as instructions. To parse these without injecting target
specific code in objdump, MCDisassembler::onSymbolStart was added to
be implemented by the WebAssembly implemention.
WasmObjectFile now returns a code offset for the "address" of a symbol,
rather than the index. This is also more in-line with what other
targets do.
Also ensured that the AsmParser correctly puts each function
in its own segment to enable this test case.
Reviewers: sbc100, dschuff
Subscribers: jgravelle-google, aheejin, sunfish, rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56684
llvm-svn: 351460
Summary:
If LTOUnit splitting is disabled, the module summary analysis computes
the summary information necessary to perform single implementation
devirtualization during the thin link with the index and no IR. The
information collected from the regular LTO IR in the current hybrid WPD
algorithm is summarized, including:
1) For vtable definitions, record the function pointers and their offset
within the vtable initializer (subsumes the information collected from
IR by tryFindVirtualCallTargets).
2) A record for each type metadata summarizing the vtable definitions
decorated with that metadata (subsumes the TypeIdentiferMap collected
from IR).
Also added are the necessary bitcode records, and the corresponding
assembly support.
The index-based WPD will be sent as a follow-on.
Depends on D53890.
Reviewers: pcc
Subscribers: mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, llvm-commits
Differential Revision: https://reviews.llvm.org/D54815
llvm-svn: 351453
This change adds demangling support to the ELF side of llvm-readobj,
under the switch --demangle/-C.
The following places are demangled: symbol table dumps (static and
dynamic), relocation dumps (static and dynamic), addrsig dumps, call
graph profile dumps, and group section signature symbols.
Although GNU readelf doesn't support demangling, it is still a useful
feature to have, and brings it on a par with llvm-objdump's
capabilities.
This fixes https://bugs.llvm.org/show_bug.cgi?id=40054.
Reviewed by: grimar, rupprecht
Differential Revision: https://reviews.llvm.org/D56791
llvm-svn: 351450
This allows it to be used in an upcoming llvm-readobj change.
A small change in internal behaviour of the function is to always call
the microsoftDemangle function if the string does not have an itanium
encoding prefix, rather than only if it starts with '?'. This is
harmless because the microsoftDemangle function does the same check
already.
Reviewed by: grimar, erik.pilkington
Differential Revision: https://reviews.llvm.org/D56721
llvm-svn: 351448
This refactors the getRelocationValueString method.
It is a bit overcomplicated and it is possible to reduce it without
losing the functionality it seems.
Differential revision: https://reviews.llvm.org/D56778
llvm-svn: 351417
Summary:
Everything before the word "version" is the tool, and everything after
the word "version" is the version.
Reviewers: aheejin, dschuff
Subscribers: sbc100, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D56742
llvm-svn: 351399
Currently we have pgo options defined in PassManagerBuilder.cpp only for
instrument pgo, but not for sample pgo. We also have pgo options defined
in NewPMDriver.cpp in opt only for new pass manager and for all kinds of
pgo. They have some inconsistency.
To make the options more consistent and make tests writing easier, the
patch let old pass manager to share the same pgo options with new pass
manager in opt, and removes the options in PassManagerBuilder.cpp.
Differential Revision: https://reviews.llvm.org/D56749
llvm-svn: 351392
Lots of tests rely on llvm-lto being present, but LLVM_ENABLE_PIC=OFF currently
disables building that executable.
There's no reason for not building llvm-lto with LLVM_ENABLE_PIC=OFF so just
build it. r191042 moved it into a "if (!WIN)" block at the time, and then
211852 made that "if(NOT CYGWIN AND LLVM_ENABLE_PIC)" -- but that's only needed
for LTO (the ld64 plugin), not for the llvm-lto binary.
Differential Revision: https://reviews.llvm.org/D56801
llvm-svn: 351374
This change gives the llvm-elfabi tool the ability to read DT_SONAME from a binary ELF file into an ELFStub.
Added:
- DynamicEntries struct for storing dynamic entries that are relevant to elfabi.
- terminatedSubstr() retrieves a null-terminated substring from a StringRef.
- appendToError() appends a string to an error, allowing more specific error messages.
Differential Revision: https://reviews.llvm.org/D55629
llvm-svn: 351361
Summary:
When llvm-nm is passed only the --size-sort option for an object file, there is no output generated.
The commit modifies the behavior to print the symbols sorted and their size which is also inline with
the output of the GNU nm tool.
Signed-off-by: Saurabh Badhwar <sbsaurabhbadhwar9@gmail.com>
Reviewers: enderby, rupprecht
Reviewed By: rupprecht
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56063
llvm-svn: 351347
Summary:
The version of make_absolute which accepted a specific directory to use
as the "base" for the computation could never fail, even though it
returned a std::error_code. The reason for that seems to be historical
-- the CWD flavour (which can fail due to failure to retrieve CWD) was
there first, and the new version was implemented by extending that.
This removes the error return value from the non-CWD overload and
reimplements the CWD version on top of that. This enables us to remove
some dead code where people were pessimistically trying to handle the
errors returned from this function.
Reviewers: zturner, sammccall
Subscribers: hiraditya, kristina, llvm-commits
Differential Revision: https://reviews.llvm.org/D56599
llvm-svn: 351317
This allows avoiding conflicts between paths that begin with the same
chars as some llvm-rc options (which can be used with either slashes
or dashes).
Differential Revision: https://reviews.llvm.org/D56743
llvm-svn: 351305
Summary:
When running llvm-objdump with the -macho option objdump will by default
disassemble only the __TEXT,__text section (or __TEXT_EXEC,__text when
disassembling MH_KEXT_BUNDLE files). The -disassemble-all option is
treated no diferently than -disassemble.
This change upates llvm-objdump's MachO parsing code to disassemble all
__text sections found in a file when -disassemble-all is specified. This
is useful for disassembling files with more than one __text section, or
when disassembling files whose __text section is not present in __TEXT.
I added a lit test case that verifies "llvm-objdump -m -d" and
"llvm-objdump -m -D" produce the expected results on a reference binary.
I also updated the CommandGuide documentation for llvm-objdump.rst and
verified it renders correctly as man and html.
rdar://42899338
Reviewers: ab, pete, lhames
Reviewed By: lhames
Subscribers: rupprecht, llvm-commits
Differential Revision: https://reviews.llvm.org/D56649
llvm-svn: 351238
Summary:
This patch adds support for merged arguments (e.g. -SW == -S -W) for llvm-readelf.
No changes are intended for llvm-readobj. There are a few short flags (-sd, -sr, -st, -dt) that would conflict with grouped single letter flags, and having only some grouped flags might be confusing. So, allow merged flags for readelf compatibility, but force separate args for llvm-readobj. From what I can tell, these two-letter flags are only used with llvm-readobj, not llvm-readelf.
This fixes PR40064.
Reviewers: jhenderson, kristina, echristo, phosek
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D56629
llvm-svn: 351205
Summary:
Fix llvm-objcopy to add .note sections as SHT_NOTEs. GNU objcopy overrides section flags for special sections. For `.note` sections (with the exception of `.note.GNU-stack`), SHT_NOTE is used.
Many other sections are special cased by libbfd, but `.note` is the only special section I can seem to find being used with objcopy --add-section.
See `.note` in context of the full list of special sections here: https://sourceware.org/git/gitweb.cgi?p=binutils-gdb.git;a=blob;f=bfd/elf.c;h=eb3e1828e9c651678b95a1dcbc3b124783d1d2be;hb=HEAD#l2675
Reviewers: jhenderson, alexshap, jakehehrlich, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56570
llvm-svn: 351204
This is a cosmetic cleanup for the llvm-objdump code.
This patch:
* Renames things to match the official LLVM code style (lower case -> upper case).
* Removes few obviously excessive variables.
* Moves a few lines closer to the place of use, reorders the code a bit to simplify it,
to avoid doing excessive returns and to avoid using 'else` after returns.
I focused only on a llvm-objdump.h/llvm-objdump.cpp files. Few changes in the
MachODump.cpp and COFFDump.cpp are a result of llvm-objdump.h modification.
Differential revision: https://reviews.llvm.org/D56637
llvm-svn: 351171
Summary:
Normal behavior for GNU ar is to flatten thin archives when adding them to another thin archive, i.e. add the members directly instead of nesting the archive.
Some refactoring done as part of this patch to ease things:
- Consolidate `addMember`/`addLibMember` methods
- Rename `addMember` to `addChildMember` to make it more visibly different at the call site that an archive child is passed instead of a regular member
- Pass in a separate vector and splice it back into position instead of passing a vector + optional Pos (which makes expanding libs tricky)
This fixes PR37530 as raised by https://github.com/ClangBuiltLinux/linux/issues/279.
Reviewers: mstorsjo, pcc, ruiu
Reviewed By: mstorsjo
Subscribers: llvm-commits, tpimh, nickdesaulniers
Differential Revision: https://reviews.llvm.org/D56508
llvm-svn: 351120
This shortcut mechanism for creating types was added 10 years ago, but
has seen almost no uptake since then, neither internally nor in
external projects.
The very small number of characters saved by using it does not seem
worth the mental overhead of an additional type-creation API, so,
delete it.
Differential Revision: https://reviews.llvm.org/D56573
llvm-svn: 351020
These were copied as part of the original design from the ELF
backend, but aren't necessary at the moment.
Differential Revision: https://reviews.llvm.org/D56431
llvm-svn: 350996
Summary:
Records in the module summary index whether the bitcode was compiled
with the option necessary to enable splitting the LTO unit
(e.g. -fsanitize=cfi, -fwhole-program-vtables, or -fsplit-lto-unit).
The information is passed down to the ModuleSummaryIndex builder via a
new module flag "EnableSplitLTOUnit", which is propagated onto a flag
on the summary index.
This is then used during the LTO link to check whether all linked
summaries were built with the same value of this flag. If not, an error
is issued when we detect a situation requiring whole program visibility
of the class hierarchy. This is the case when both of the following
conditions are met:
1) We are performing LowerTypeTests or Whole Program Devirtualization.
2) There are type tests or type checked loads in the code.
Note I have also changed the ThinLTOBitcodeWriter to also gate the
module splitting on the value of this flag.
Reviewers: pcc
Subscribers: ormris, mehdi_amini, Prazek, inglorion, eraman, steven_wu, dexonsmith, arphaman, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D53890
llvm-svn: 350948
Previously, this was broken - by setting PointerToSymbolTable to zero
but still actually writing the string table length, the object file
header was corrupted.
Differential Revision: https://reviews.llvm.org/D56584
llvm-svn: 350926
In an assert build, the Error gets destroyed and we get "Program aborted
due to an unhandled Error:".
In release, we get an empty message.
llvm-svn: 350848
This is https://bugs.llvm.org/show_bug.cgi?id=26892,
GNU objdump hides the special symbol entry:
SYMBOL TABLE:
000000000000a7e0 l F .text 00000000000003f9 bi_copymodules
while llvm-objdump does not:
SYMBOL TABLE:
0000000000000000 *UND* 00000000
000000000000a7e0 l F .text 000003f9 bi_copymodules
Patch makes the behavior of the llvm-objdump to be consistent with the GNU objdump.
Differential revision: https://reviews.llvm.org/D56076
llvm-svn: 350840
That is, remove many of the calls to Type::getNumContainedTypes(),
Type::subtypes(), and Type::getContainedType(N).
I'm not intending to remove these accessors -- they are
useful/necessary in some cases. However, removing the pointee type
from pointers would potentially break some uses, and reducing the
number of calls makes it easier to audit.
llvm-svn: 350835
This is https://bugs.llvm.org/show_bug.cgi?id=37151,
GNU objdump spec says that "Normally the disassembly output will skip blocks of zeroes.",
but currently, llvm-objdump prints them.
The patch implements the -z/--disassemble-zeroes option and switches the default to always
skip blocks of zeroes.
Differential revision: https://reviews.llvm.org/D56083
llvm-svn: 350823
See https://bugs.llvm.org/show_bug.cgi?id=40070.
GNU addr2line accepts input addresses both on the command-line and via
stdin. llvm-symbolizer previously only supported the latter. This
change adds support for the former. As with addr2line, the new
behaviour is to only look for addresses on stdin if no positional
arguments were provided to llvm-symbolizer.
Reviewed by: ruiu
Differential Revision: https://reviews.llvm.org/D56272
llvm-svn: 350821
Field ResourceUnitMask was incorrectly defined as a 'const unsigned' mask. It
should have been a 64 bit quantity instead. That means, ResourceUnitMask was
always implicitly truncated to a 32 bit quantity.
This issue has been found by inspection. Surprisingly, that bug was latent, and
it never negatively affected any existing upstream targets.
This patch fixes the wrong definition of ResourceUnitMask, and adds a bunch of
extra debug prints to help debugging potential issues related to invalid
processor resource masks.
llvm-svn: 350820
When GNU objdump dumps the input with -d it prints the symbol addresses,
for example:
0000000000000031 <foo>:
31: 00 00 add %al,(%rax)
...
llvm-objdump currently does not do that.
Patch changes the behavior to match the GNU objdump.
That is useful for implementing -z/--disassemble-zeroes (D56083),
it allows omitting first zero bytes and keep the information
about the symbol address in the output.
Differential revision: https://reviews.llvm.org/D56123
llvm-svn: 350726
This patch improves llvm-profdata show command:
(1) add -value-cutoff=<N> option: Show only those functions whose max count
values are greater or equal to N.
(2) add -list-below-cutoff option: Only output names of functions whose max
count value are below the cutoff.
(3) formats value-profile counts and prints out percentage.
Differential Revision: https://reviews.llvm.org/D56342
llvm-svn: 350673
An assertion was hit when running dsymutil on a gcc generated binary
that contained an empty address range. Address ranges are stored in an
interval map of half open intervals. Since the interval is empty and
therefore meaningless, we simply don't add it to the map.
llvm-svn: 350591
The unobufscation support for BCSymbolMaps was the last piece of code
that hasn't been upstreamed yet. This patch contains a reworked version
of the existing code and relevant tests.
Differential revision: https://reviews.llvm.org/D56346
llvm-svn: 350580
In LTO or Thin-lto mode (though linker plugin), the module
names are of temp file names which are different for
different compilations. Using SourceFileName avoids the issue.
This should not change any functionality for current PGO as
all the current callers of getPGOFuncName() is before LTO.
llvm-svn: 350579
Although llvm-elfabi will attempt to read input files without needing the format to be manually specified, doing so has the potential to introduce extraneous errors that can hinder debugging (since multiple readers may fail in attempts to read the file). This change allows the input file format to be manually specified to force elfabi to use a single reader. This makes it easier to test and debug errors specific to a given reader.
llvm-svn: 350545
Summary:
The -O flag is currently being mostly ignored; it's only checked whether or not the output format is "binary". This adds support for a few formats (e.g. elf64-x86-64), so that when specified, the output can change between 32/64 bit and sizes/alignments are updated accordingly.
This fixes PR39135
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D53667
llvm-svn: 350541
Follow up for D53051
This patch introduces the tool associated with the ELF implementation of
TextAPI (previously llvm-tapi, renamed for better distinction). This
tool will house a number of features related to enalysis and
manipulation of shared object's exposed interfaces. The first major
feature for this tool is support for producing binary stubs that are
useful for compile-time linking of shared objects. This patch introduces
beginnings of support for reading binary ELF objects to work towards
that goal.
Added:
- elfabi tool.
- support for reading architecture from a binary ELF file into an
ELFStub.
- Support for writing .tbe files.
Differential Revision: https://reviews.llvm.org/D55352
llvm-svn: 350341
Summary:
Fix EntrySize, Size, and Align before doing layout calculation.
As a side cleanup, this removes a dependence on sizeof(Elf_Sym) within BinaryReader, so we can untemplatize that.
This unblocks a cleaner implementation of handling the -O<format> flag. See D53667 for a previous attempt. Actual implementation of the -O<format> flag will come in an upcoming commit, this is largely a NFC (although not _totally_ one, because alignment on binary input was actually wrong before).
Reviewers: jakehehrlich, jhenderson, alexshap, espindola
Reviewed By: jhenderson
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D56211
llvm-svn: 350336
Make sure all print statements are compatible with Python 2 and Python3 using
the `from __future__ import print_function` statement.
Differential Revision: https://reviews.llvm.org/D56249
llvm-svn: 350307
There can be multiple local symbols with the same name (for e.g.
comdat sections), and thus the symbol name itself isn't enough
to disambiguate symbols.
Differential Revision: https://reviews.llvm.org/D56140
llvm-svn: 350288
Summary:
Sometimes it's useful to emit assembly after LTO stage to modify it manually. Emitting precodegen bitcode file (via save-temps plugin option) and then feeding it to llc doesn't always give the same binary as original.
This patch is simpler alternative to https://reviews.llvm.org/D24020.
Patch by Denis Bakhvalov.
Reviewers: mehdi_amini, tejohnson
Reviewed By: tejohnson
Subscribers: MaskRay, inglorion, dexonsmith, llvm-commits
Differential Revision: https://reviews.llvm.org/D56114
llvm-svn: 350276
Summary:
SetVector uses both DenseSet and vector, which is time/memory inefficient. The points are represented as natural numbers so we can replace the DenseSet part by indexing into a vector<char> instead.
Don't cargo cult the pseudocode on the wikipedia DBSCAN page. This is a standard BFS style algorithm (the similar loops have been used several times in other LLVM components): every point is processed at most once, thus the queue has at most NumPoints elements. We represent it with a vector and allocate it outside of the loop to avoid allocation in the loop body.
We check `Processed[P]` to avoid enqueueing a point more than once, which also nicely saves us a `ClusterIdForPoint_[Q].isUndef()` check.
Many people hate the oneshot abstraction but some favor it, therefore we make a compromise, use a lambda to abstract away the neighbor adding process.
Delete the comment `assert(Neighbors.capacity() == (Points_.size() - 1));` as it is wrong.
llvm-svn: 350035
Summary:
This function is very similar to add_llvm_library(), so this patch merges it
into add_llvm_library() and replaces all calls to add_llvm_loadable_module(lib ...)
with add_llvm_library(lib MODULE ...)
Reviewers: philip.pfaffe, beanz, chandlerc
Reviewed By: philip.pfaffe
Subscribers: chapuni, mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D51748
llvm-svn: 349839
This fixes all cases of errors in asan+ubsan builds.
Also use std::copy instead of if+memcpy in the previously updated spot,
for consistency.
llvm-svn: 349826
These tools were assuming ABI version is 0,
that is not always true.
Patch teaches them to work with that field.
Differential revision: https://reviews.llvm.org/D55884
llvm-svn: 349737
Adds a build file for clang-tblgen and an action for running it, and uses that
to process all the .td files in include/clang/Basic.
Also adds an action to write include/clang/Config/config.h and
include/clang/Basic/Version.inc.
Differential Revision: https://reviews.llvm.org/D55847
llvm-svn: 349677
Summary:
It's a bit tricky to add a test for the failing path right now, binary support will have an easier path to exercise the path here.
* Ran clang-format.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: tschuett, gbedwell, llvm-commits
Differential Revision: https://reviews.llvm.org/D55803
llvm-svn: 349659
Should fix the http://lab.llvm.org:8011/builders/polly-amd64-linux/builds/25876/steps/build/logs/stdio:
/home/grosser/buildslave/polly-amd64-linux/llvm.src/tools/llvm-objdump/llvm-objdump.cpp:539:25: error: conditional expression is ambiguous; 'std::string' (aka 'basic_string<char>') can be converted to 'typename std::remove_reference<StringRef>::type' (aka 'llvm::StringRef') and vice versa
Target = Demangle ? demangle(*SymName) : *SymName;
llvm-svn: 349617
This is an initial implementation of no-op passthrough copying of COFF
with objcopy.
Differential Revision: https://reviews.llvm.org/D54939
llvm-svn: 349605
Summary:
In addition to reducing the functions in an LLVM module, bugpoint now
reduces the function attributes associated with each of the remaining
functions.
To test this, add a -bugpoint-crashfuncattr test pass, which crashes if
a function in the module has a "bugpoint-crash" attribute. A test case
demonstrates that the IR is reduced to just that one attribute.
Reviewers: MatzeB, silvas, davide, reames
Reviewed By: reames
Subscribers: reames, llvm-commits
Differential Revision: https://reviews.llvm.org/D55216
llvm-svn: 349601
- Reapply changes intially introduced in r343089
- The archtecture info is no longer loaded whenever a DWARFContext is created
- The runtimes libraries (santiziers) make use of the dwarf context classes but
do not intialise the target info
- The architecture of the object can be obtained without loading the target info
- Adding a method to the dwarf context to get this information and multiplex the
string printing later on
Differential Revision: https://reviews.llvm.org/D55774
llvm-svn: 349472
Class InstrBuilder wrongly assumed that llvm targets were always able to return
a non-null pointer when createMCInstrAnalysis() was called on them.
This was causing crashes when simulating executions for targets that don't
provide an MCInstrAnalysis object.
This patch fixes the issue by making MCInstrAnalysis optional.
llvm-svn: 349352
Summary:
This patch checks if the section order is correct when reading a wasm
object file in `WasmObjectFile` and converting YAML to wasm object in
yaml2wasm. (It is not possible to check when reading YAML because it is
handled exclusively by the YAML reader.)
This checks the ordering of all known sections (core sections + known
custom sections). This also adds section ID DataCount section that will
be scheduled to be added in near future.
Reviewers: sbc100
Subscribers: dschuff, mgorny, jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54924
llvm-svn: 349221
Summary:
Use `vector<char> Added + vector<size_t> ToProcess` to replace `SetVector ToProcess`
We also check `Added[P]` to enqueueing a point more than once, which
also saves us a `ClusterIdForPoint_[Q].isUndef()` check.
Reviewers: courbet, RKSimon, gchatelet, john.brawn, lebedev.ri
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54442
........
Patch wasn't approved and breaks buildbots
llvm-svn: 349139
Summary:
Use `vector<char> Added + vector<size_t> ToProcess` to replace `SetVector ToProcess`
We also check `Added[P]` to enqueueing a point more than once, which
also saves us a `ClusterIdForPoint_[Q].isUndef()` check.
Reviewers: courbet, RKSimon, gchatelet, john.brawn, lebedev.ri
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54442
llvm-svn: 349136
Summary:
llvm-size uses "isText()" etc. which seem to indicate whether the section contains code-like things, not whether or not it will actually go in the text segment when in a fully linked executable.
The unit test added (elf-sizes.test) shows some types of sections that cause discrepencies versus the GNU size tool. llvm-size is not correctly reporting sizes of things mapping to text/data segments, at least for ELF files.
This fixes pr38723.
Reviewers: echristo, Bigcheese, MaskRay
Reviewed By: MaskRay
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54369
llvm-svn: 349074
Summary:
In both Elf{32,64}_Phdr, the field Elf{32,64}_World p_type is uint32_t.
Also reorder the fields to be similar to Elf64_Phdr (which is different
from Elf32_Phdr but quite similar).
Reviewers: rupprecht, jhenderson, jakehehrlich, alexshap, espindola
Reviewed By: rupprecht
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55618
llvm-svn: 348985
Continue to present HSA metadata as YAML in ASM and when output by tools
(e.g. llvm-readobj), but encode it in Messagepack in the code object.
Differential Revision: https://reviews.llvm.org/D48179
llvm-svn: 348963
Using an Error as an out parameter from an indirect operation like
iteration as described in the documentation (
http://llvm.org/docs/ProgrammersManual.html#building-fallible-iterators-and-iterator-ranges
) seems to be a little fussy - so here's /one/ possible solution, though
I'm not sure it's the right one.
Alternatively such APIs may be better off being switched to a standard
algorithm style, where they take a lambda to do the iteration work that
is then called back into (eg: "Error e = obj.for_each_note([](const
Note& N) { ... });"). This would be safer than having an unwritten
assumption that the user of such an iteration cannot return early from
the inside of the function - and must always exit through the gift
shop... I mean error checking. (even though it's guaranteed that if
you're mid-way through processing an iteration, it's not in an error
state).
Alternatively we'd need some other (the super untrustworthy/thing we've
generally tried to avoid) error handling primitive that actually clears
the error state entirely so it's safe to ignore.
Fleshed this solution out a bit further during review - it now relies on
op==/op!= comparison as the equivalent to "if (Err)" testing the Error.
So just like an Error must be checked (even if it's in a success state),
the Error hiding in the iterator must be checked after each increment
(including by comparison with another iterator - perhaps this could be
constrained to only checking if the iterator is compared to the end
iterator? Not sure it's too important).
So now even just creating the iterator and not incrementing it at all
should still assert because the Error has not been checked.
Reviewers: lhames, jakehehrlich
Differential Revision: https://reviews.llvm.org/D55235
llvm-svn: 348811
Summary:
When bugpoint attempts to find the other executables it needs to run,
such as `opt` or `clang`, it tries searching the user's PATH. However,
in many cases, the 'bugpoint' executable is part of an LLVM build, and
the 'opt' executable it's looking for is in that same directory.
Many LLVM tools handle this case by using the `Paths` parameter of
`llvm::sys::findProgramByName`, passing the parent path of the currently
running executable. Do this same thing for bugpoint. However, to
preserve the current behavior exactly, first search the user's PATH,
and then search for 'opt' in the directory containing 'bugpoint'.
Test Plan:
`check-llvm`. Many of the existing bugpoint tests no longer need to use the
`--opt-command` option as a result of these changes.
Reviewers: MatzeB, silvas, davide
Reviewed By: MatzeB, davide
Subscribers: davide, llvm-commits
Differential Revision: https://reviews.llvm.org/D54884
llvm-svn: 348734
Summary:
This anoymous function actually has same logic with `Obj->toMappedAddr`.
Besides, I have a question on resolving illegal value. `gnu-readelf`, `gnu-objdump` and `llvm-objdump` could parse the test file 'test/tools/llvm-objdump/Inputs/private-headers-x86_64.elf', but `llvm-readobj` will fail when parse `DT_RELR` segment. Because, the value is 0x87654321 which is illegal. So, shall we do this clean up rather then remove the checking statements inside anoymous function?
```
if (Delta >= Phdr.p_filesz)
return createError("Virtual address is not in any segment");
```
Reviewers: rupprecht, jhenderson
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D55329
llvm-svn: 348701
Summary: This line is longer than 80 characters.
Subscribers: llvm-commits, jakehehrlich
Differential Revision: https://reviews.llvm.org/D55419
llvm-svn: 348580
Summary: This line is longer than 80 characters.
Subscribers: llvm-commits, jakehehrlich
Differential Revision: https://reviews.llvm.org/D55419
llvm-svn: 348578
I just hard core goofed when I wrote this and created a different name
for no good reason. I'm failry aware of most "fresh" users of llvm-objcopy
(that is, users which are not using it as a drop in replacement for GNU
objcopy) and can say that only "-j" is being used by such people so this
patch should strictly increase compatibility and not remove it.
Differential Revision: https://reviews.llvm.org/D52180
llvm-svn: 348446
Summary:
r336838 allowed these to be toggleable.
r336858 reverted r336838.
r336943 made the generation of these sections conditional on LDPO_REL.
This commit brings back the toggle-ability. You can specify:
-plugin-opt=-function-sections
-plugin-opt=-data-sections
For your linker flags to disable the changes made in r336943.
Without toggling r336943 off, arm64 linux kernels linked with gold-plugin
see significant boot time regressions, but with r336943 outright reverted
x86_64 linux kernels linked with gold-plugin fail to boot.
Reviewers: pcc, void
Reviewed By: pcc
Subscribers: javed.absar, kristof.beyls, llvm-commits, srhines
Differential Revision: https://reviews.llvm.org/D55291
llvm-svn: 348389
After TimePoint's precision was increased in LLVM we started seeing
failures because the modification times didn't match. This adds a time
cast to ensure that we're comparing TimePoints with the same amount of
precision.
llvm-svn: 348283
This flag does not exist in GNU objcopy but has a major use case.
Debugging tools support the .build-id directory structure to find
debug binaries. There is no easy way to build this structure up
however. One way to do it is by using llvm-readelf and some crazy
shell magic. This implements the feature directly. It is most often
the case that you'll want to strip a file and send the original to
the .build-id directory but if you just want to send a file to the
.build-id directory you can copy to /dev/null instead.
Differential Revision: https://reviews.llvm.org/D54384
llvm-svn: 348174
Usually local symbols will have their address described in the debug
map. Global symbols have to have their address looked up in the symbol
table of the main executable. By playing with 'ld -r' and export lists,
you can get a symbol described as global by the debug map while actually
being a local symbol as far as the link in concerned. By gathering the
address of local symbols, we fix this issue.
Also, we prefer a global symbol in case of a name collision to preserve
the previous behavior.
Note that using the 'ld -r' tricks, people can actually cause symbol
names collisions that dsymutil has no way to figure out. This fixes the
simple case where there is only one symbol of a given name.
rdar://problem/32826621
Differential revision: https://reviews.llvm.org/D54922
llvm-svn: 348021
This patch removes a (potentially) slow while loop in
DefaultResourceStrategy::select(). A better (and faster) approach is to do some
bit manipulation in order to shrink the range of candidate resources.
On a release build, this change gives an average speedup of ~10%.
llvm-svn: 348007
Summary: The original intention of !Config.xx.empty() was probably to emphasize the thing that is currently considered, but I feel the simplified form is actually easier to understand and it is also consistent with the call sites in other llvm components.
Reviewers: alexshap, rupprecht, jakehehrlich, jhenderson, espindola
Reviewed By: alexshap, rupprecht
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D55040
llvm-svn: 347891
Summary:
We can sometimes end up with multiple copies of a local variable that
have the same GUID in the index. This happens when there are local
variables with the same name that are in different source files having the
same name/path at compile time (but compiled into different bitcode objects).
In this case make sure we import the copy in the caller's module.
This enables importing both of the variables having the same GUID
(but which will have different promoted names since the module paths,
and therefore the module hashes, will be distinct).
Importing the wrong copy is particularly problematic for read only
variables, since we must import them as a local copy whenever
referenced. Otherwise we get undefs at link time.
Note that the llvm-lto.cpp and ThinLTOCodeGenerator changes are needed
for testing the distributed index case via clang, which will be sent as
a separate clang-side patch shortly. We were previously not doing the
dead code/read only computation before computing imports when testing
distributed index generation (like it was for testing importing and
other ThinLTO mechanisms alone).
Reviewers: evgeny777
Subscribers: mehdi_amini, inglorion, eraman, steven_wu, dexonsmith, dang, llvm-commits
Differential Revision: https://reviews.llvm.org/D55047
llvm-svn: 347886
This patch adds the ability to specify via tablegen which processor resources
are load/store queue resources.
A new tablegen class named MemoryQueue can be optionally used to mark resources
that model load/store queues. Information about the load/store queue is
collected at 'CodeGenSchedule' stage, and analyzed by the 'SubtargetEmitter' to
initialize two new fields in struct MCExtraProcessorInfo named `LoadQueueID` and
`StoreQueueID`. Those two fields are identifiers for buffered resources used to
describe the load queue and the store queue.
Field `BufferSize` is interpreted as the number of entries in the queue, while
the number of units is a throughput indicator (i.e. number of available pickers
for loads/stores).
At construction time, LSUnit in llvm-mca checks for the presence of extra
processor information (i.e. MCExtraProcessorInfo) in the scheduling model. If
that information is available, and fields LoadQueueID and StoreQueueID are set
to a value different than zero (i.e. the invalid processor resource index), then
LSUnit initializes its LoadQueue/StoreQueue based on the BufferSize value
declared by the two processor resources.
With this patch, we more accurately track dynamic dispatch stalls caused by the
lack of LS tokens (i.e. load/store queue full). This is also shown by the
differences in two BdVer2 tests. Stalls that were previously classified as
generic SCHEDULER FULL stalls, are not correctly classified either as "load
queue full" or "store queue full".
About the differences in the -scheduler-stats view: those differences are
expected, because entries in the load/store queue are not released at
instruction issue stage. Instead, those are released at instruction executed
stage. This is the main reason why for the modified tests, the load/store
queues gets full before PdEx is full.
Differential Revision: https://reviews.llvm.org/D54957
llvm-svn: 347857
This reapplies r347767 (originally reviewed at: https://reviews.llvm.org/D55000)
with a fix for the missing std::move of the Error returned by the call to
Pipeline::runCycle().
Below is the original commit message from r347767.
If a user only cares about the overall latency, then the best/quickest way is to
change method Pipeline::run() so that it returns the total number of cycles to
the caller.
When the simulation pipeline is run, the number of cycles (or an error) is
returned from method Pipeline::run().
The advantage is that no hardware event listener is needed for computing that
latency. So, the whole process should be faster (and simpler - at least for that
particular use case).
llvm-svn: 347795
If a user only cares about the overall latency, then the best/quickest way is to
change method Pipeline::run() so that it returns the total number of cycles to
the caller.
When the simulation pipeline is run, the number of cycles (or an error) is
returned from method Pipeline::run().
The advantage is that no hardware event listener is needed for computing that
latency. So, the whole process should be faster (and simpler - at least for that
particular use case).
llvm-svn: 347767
This allows libtool to detect the presence of llvm-strip and use
it with the options --strip-debug and --strip-unneeded.
Also hook up the -V alias for objcopy.
Differential Revision: https://reviews.llvm.org/D54936
llvm-svn: 347731
Summary:
By default sanstats search binaries at the same location where they were when
stats was collected. Sometime you can not print report immediately or you need
to move post-processing to another workstation. To support this use-case when
original binary is missing sanstats will fall-back to directory with sanstats
file.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53857
llvm-svn: 347601
Summary: Help with off-line symbolization or other type debugging.
Reviewers: pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D53606
llvm-svn: 347600
By default, llvm-mca conservatively assumes that a register operand from the
variadic sequence is both a register read and a register write. That is because
MCInstrDesc doesn't describe extra variadic operands; we don't have enough
dataflow information to tell which register operands from the variadic sequence
is a definition, and which is a use instead.
However, if a variadic instruction is flagged 'mayStore' (but not 'mayLoad'),
and it has no 'unmodeledSideEffects', then llvm-mca (very) optimistically
assumes that any register operand in the variadic sequence is a register read
only. Conversely, if a variadic instruction is marked as 'mayLoad' (but not
'mayStore'), and it has no 'unmodeledSideEffects', then llvm-mca optimistically
assumes that any extra register operand is a register definition only.
These assumptions work quite well for variadic load/store multiple instructions
defined by the ARM backend.
llvm-svn: 347522
With this change, InstrBuilder emits an error if the MCInst sequence contains an
instruction with a variadic opcode, and a non-zero number of variadic operands.
Currently we don't know how to correctly analyze variadic opcodes. The problem
with variadic operands is that there is no information for them in the opcode
descriptor (i.e. MCInstrDesc). That means, we don't know which variadic operands
are defs, and which are uses.
In future, we could try to conservatively assume that any extra register
operands is both a register use and a register definition.
This patch fixes a subtle bug in the evaluation of read/write operands for ARM
VLD1 with implicit index update. Added test vld1-index-update.s
llvm-svn: 347503
RetireControlUnitStatistics now reports extra information about the ROB and the
avg/maximum number of entries consumed over the entire simulation.
Example:
Retire Control Unit - number of cycles where we saw N instructions retired:
[# retired], [# cycles]
0, 109 (17.9%)
1, 102 (16.7%)
2, 399 (65.4%)
Total ROB Entries: 64
Max Used ROB Entries: 35 ( 54.7% )
Average Used ROB Entries per cy: 32 ( 50.0% )
Documentation in llvm/docs/CommandGuide/llvmn-mca.rst has been updated to
reflect this change.
llvm-svn: 347493
Also, try to minimize the number of queries to the memory queues to speedup the
analysis.
On average, this change gives a small 2% speedup. For memcpy-like kernels, the
speedup is up to 5.5%.
llvm-svn: 347469
This avoids a heap allocation most of the times.
This patch gives a small but consistent 3% speedup on a release build (up to ~5%
on a debug build).
llvm-svn: 347464
This patch fixes an invalid memory read introduced by r346487.
Before this patch, partial register write had to query the latency of the
dependent full register write by calling a method on the full write descriptor.
However, if the full write is from an already retired instruction, chances are
that the EntryStage already reclaimed its memory.
In some parial register write tests, valgrind was reporting an invalid
memory read.
This change fixes the invalid memory access problem. Writes are now responsible
for tracking dependent partial register writes, and notify them in the event of
instruction issued.
That means, partial register writes no longer need to query their associated
full write to check when they are ready to execute.
Added test X86/BtVer2/partial-reg-update-7.s
llvm-svn: 347459
Apply review comments of https://reviews.llvm.org/D54185 to other target as well, specifically:
1. make anonymous namespaces as small as possible, avoid using static inside anonymous namespaces
2. Add missing header to some files
3. GetLoadImmediateOpcodem-> getLoadImmediateOpcode
4. Fix typo
Differential Revision: https://reviews.llvm.org/D54343
llvm-svn: 347309
This will hold flags specific to subprograms. In the future
we could potentially free up scarce bits in DIFlags by moving
subprogram-specific flags from there to the new flags word.
This patch does not change IR/bitcode formats, that will be
done in a follow-up.
Differential Revision: https://reviews.llvm.org/D54597
llvm-svn: 347239
MachOObjectFile::getHostArch() returns a temporary, and getArchName
returns a StringRef pointing to a temporary std::string.
No tests since it doesn't trigger any errors except with the sanitizers.
llvm-svn: 347230
This patch defines an interleaved-load-combine pass. The pass searches
for ShuffleVector instructions that represent interleaved loads. Matches are
converted such that they will be captured by the InterleavedAccessPass.
The pass extends LLVMs capabilities to use target specific instruction
selection of interleaved load patterns (e.g.: ld4 on Aarch64
architectures).
Differential Revision: https://reviews.llvm.org/D52653
llvm-svn: 347208
Summary:
As it was pointed out in D54388+D54390, the maximal size of `Neighbors` is known,
it will contain at most Points_.size() minus one (the center of the cluster)
While that is the upper bound, meaning in the most cases, the actual count
will be much smaller, since D54390 made the allocation persistent,
we no longer have to worry about overly-optimistically `reserve()`ing.
Old: (D54393)
```
Performance counter stats for './bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html' (16 runs):
6553.167456 task-clock (msec) # 1.000 CPUs utilized ( +- 0.21% )
...
6.5547 +- 0.0134 seconds time elapsed ( +- 0.20% )
```
New:
```
Performance counter stats for './bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html' (16 runs):
6315.057872 task-clock (msec) # 0.999 CPUs utilized ( +- 0.24% )
...
6.3187 +- 0.0160 seconds time elapsed ( +- 0.25% )
```
And that is another -~4%.
Since this is the last (as of this moment) patch in this patch series,
it is a good time to summarize:
Old: (svn trunk, as stated in D54381)
```
$ time ./bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html &> /dev/null
real 0m24.884s
user 0m24.099s
sys 0m0.785s
```
So these patches, on a given benchmark,
has decreased llvm-exegesis analysis time by 74.62%.
There surely is more room for further improvements.
D54514 may improve thins by -11.5% more (relative to this patch).
Parallelization may improve things further significantly, too.
Reviewers: courbet, MaskRay, RKSimon, gchatelet, john.brawn
Reviewed By: courbet, MaskRay
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54415
llvm-svn: 347204
Summary:
Test data: 500kLOC of benchmark.yaml, 23Mb. (that is a subset of the actual uops benchmark i was trying to analyze!)
Old time: (D54381)
```
$ time ./bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html &> /dev/null
real 0m10.487s
user 0m9.745s
sys 0m0.740s
```
New time:
```
$ time ./bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html &> /dev/null
real 0m9.599s
user 0m8.824s
sys 0m0.772s
```
Not that much, around -9%. But that is not the good part yet, again.
Old:
* calls to allocation functions: 3347676
* temporary allocations: 277818
* bytes allocated in total (ignoring deallocations): 10.52 GB
New:
* calls to allocation functions: 2109712 (-36%)
* temporary allocations: 33112 (-88%)
* bytes allocated in total (ignoring deallocations): 4.43 GB (-58% *sic*)
Reviewers: courbet, MaskRay, RKSimon, gchatelet, john.brawn
Reviewed By: courbet, MaskRay
Subscribers: tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54382
llvm-svn: 347198
Summary:
Test data: 500kLOC of benchmark.yaml, 23Mb. (that is a subset of the actual uops benchmark i was trying to analyze!)
Old time:
```
$ time ./bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html &> /dev/null
real 0m24.884s
user 0m24.099s
sys 0m0.785s
```
New time:
```
$ time ./bin/llvm-exegesis -mode=analysis -analysis-epsilon=100000 -benchmarks-file=/tmp/benchmarks.yaml -analysis-inconsistencies-output-file=/tmp/clusters.html &> /dev/null
real 0m10.469s
user 0m9.797s
sys 0m0.672s
```
So -60%. And that isn't the good bit yet.
Old:
* calls to allocation functions: 106560180 (yes, 107 *million* allocations.)
* bytes allocated in total (ignoring deallocations): 12.17 GB
New:
* calls to allocation functions: 3347676 (-96.86%) (just 3 mil)
* bytes allocated in total (ignoring deallocations): 10.52 GB (~2GB less)
---
Two points i want to raise:
* `std::unordered_set<>` should not have been used there in the first place.
It is banned by the https://llvm.org/docs/ProgrammersManual.html#other-set-like-container-options
* There is no tests, so i'm not fully sure this is correct.
Since it was unordered set, i guess there are zero restrictions on the order, and anything will be ok?
* I tried other containers suggested in https://llvm.org/docs/ProgrammersManual.html#set-like-containers-std-set-smallset-setvector-etc,
this `llvm::SetVector<>` seems to be best here.
Reviewers: courbet, MaskRay, RKSimon, gchatelet, john.brawn
Reviewed By: courbet
Subscribers: kristina, bobsayshilol, tschuett, llvm-commits
Differential Revision: https://reviews.llvm.org/D54381
llvm-svn: 347197
Summary:
According to `MaskRay`, use `auto` for type inference, according to coding standards.
Delete some comments, because these comments can be easily inferred from codes.
Reviewers: jhenderson, MaskRay
Reviewed By: jhenderson
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D54573
llvm-svn: 346946
Summary:
This adds support for the 'event section' specified in the exception
handling proposal. (This was named 'exception section' first, but later
renamed to 'event section' to take possibilities of other kinds of
events into consideration. But currently we only store exception info in
this section.)
The event section is added between the global section and the export
section. This is for ease of validation per request of the V8 team.
This patch:
- Creates the event symbol type, which is a weak symbol
- Makes 'throw' instruction take the event symbol '__cpp_exception'
- Adds relocation support for events
- Adds WasmObjectWriter / WasmObjectFile (Reader) support
- Adds obj2yaml / yaml2obj support
- Adds '.eventtype' printing support
Reviewers: dschuff, sbc100, aardappel
Subscribers: jgravelle-google, sunfish, llvm-commits
Differential Revision: https://reviews.llvm.org/D54096
llvm-svn: 346825
Summary:
llvm-objcopy/strip support `--keep` (for sections) and `--keep-symbols` (for symbols). For consistency and clarity, rename `--keep` to `--keep-section`.
In fact, for GNU compatability, -K is --keep-symbol, so it's weird that the alias `-K` is not the same as the short-ish `--keep`.
Reviewers: jakehehrlich, jhenderson, alexshap, MaskRay, espindola
Reviewed By: jakehehrlich, MaskRay
Subscribers: emaste, arichardson, llvm-commits
Differential Revision: https://reviews.llvm.org/D54477
llvm-svn: 346782
The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
Summary:
This change adds a bunch of options that GNU readelf supports. There is one breaking change when invoked as `llvm-readobj`, and three breaking changes when invoked as `llvm-readelf`:
- Add --all (implies --file-header, --program-headers, etc.)
- [Breaking] -a is --all instead of --arm-attributes
- Add --file-header as an alias for --file-headers
- Replace --sections with --sections-headers, keeping --sections as an alias for it
- Add --relocs as an alias for --relocations
- Add --dynamic as an alias for --dynamic-table
- Add --segments as an alias for --program-headers
- Add --section-groups as an alias for --elf-section-groups
- Add --dyn-syms as an alias for --dyn-symbols
- Add --syms as an alias for --symbols
- Add --histogram as an alias for --elf-hash-histogram
- [Breaking] When invoked as `llvm-readelf`, -s is --symbols instead of --sections
- [Breaking] When invoked as `llvm-readelf`, -t is no longer an alias for --symbols
Reviewers: MaskRay, phosek, mcgrathr, jhenderson
Reviewed By: MaskRay, jhenderson
Subscribers: sbc100, aheejin, edd, jhenderson, silvas, echristo, compnerd, kristina, javed.absar, kristof.beyls, llvm-commits, Bigcheese
Differential Revision: https://reviews.llvm.org/D54124
llvm-svn: 346685
When looking at the tests committed by Roman at r346587, I noticed that numbers
reported by the resource pressure for PdAGU01 were wrong.
In particular, according to the aut-generated CHECK lines in tests
memcpy-like-test.s and store-throughput.s, resource pressure for PdAGU01
was not uniformly distributed among the two AGEN pipes.
It turns out that the reason why pressure was not correctly distributed, was
because the "resource selection strategy" object associated with PdAGU01 was not
correctly updated on the event of AGEN pipe used.
As a result, llvm-mca was not simulating a round-robin pipeline allocation for
PdAGU01. Instead, PdAGU1 was always prioritized over PdAGU0.
This patch fixes the issue; now processor resource strategy objects for
resources declaring multiple units, are correctly notified in the event of
"resource used".
llvm-svn: 346650
James Henderson