This fixes a reported bug that caused an infinite loop during the
SelectionDAG optimization phase in ISel, by creating an overridable hook
in `TargetLowering` that allows us to bail out from running
`SimplifyDemandedVectorElts`.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D121869
Implement support for matching an index from a WebAssembly CALL
instruction. Add test.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D115327
When possible, optimize TRUNCATE to generate Wasm SIMD narrow
instructions (i16x8.narrow_i32x4_u, i8x16.narrow_i16x8_u), rather than generate
lots of extract_lane and replace_lane.
Closes#50350.
This patch implements the intrinsic for ref.null.
In the process of implementing int_wasm_ref_null_func() and
int_wasm_ref_null_extern() intrinsics, it removes the redundant
HeapType.
This also causes the textual assembler syntax for ref.null to
change. Instead of receiving an argument: `func` or `extern`, the
instruction mnemonic is either ref.null_func or ref.null_extern,
without the need for a further operand.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D114979
Our fallback expansion for CTLZ/CTTZ relies on CTPOP. If CTPOP
isn't legal or custom for a vector type we would scalarize the
CTLZ/CTTZ. This is different than CTPOP itself which would use a
vector expansion.
This patch teaches expandCTLZ/CTTZ to rely on the vector CTPOP
expansion instead of scalarizing. To do this I had to add additional
checks to make sure the operations used by CTPOP expansions are all
supported. Some of the operations were already needed for the CTLZ/CTTZ
expansion.
This is a huge improvement to the RISCV which doesn't have a scalar
ctlz or cttz in the base ISA.
For WebAssembly, I've added Custom lowering to keep the scalarizing
behavior. I've also extended the scalarizing to CTPOP.
Differential Revision: https://reviews.llvm.org/D111919
This change implements new DAG nodes TABLE_GET/TABLE_SET, and lowering
methods for load and stores of reference types from IR arrays. These
global LLVM IR arrays represent tables at the Wasm level.
Differential Revision: https://reviews.llvm.org/D111154
This makes Wasm EH work with dynamic linking. So far we were only able
to handle destructors, which do not use any tags or LSDA info.
1. This uses `TargetExternalSymbol` for `GCC_except_tableN` symbols,
which points to the address of per-function LSDA info. It is more
convenient to use than `MCSymbol` because it can take additional
target flags.
2. When lowering `wasm_lsda` intrinsic, if PIC is enabled, make the
symbol relative to `__memory_base` and generate the `add` node. If
PIC is disabled, continue to use the absolute address.
3. Make tag symbols (`__cpp_exception` and `__c_longjmp`) undefined in
the backend, because it is hard to make it work with dynamic
linking's loading order. Instead, we make all tag symbols undefined
in the LLVM backend and import it from JS.
4. Add support for undefined tags to the linker.
Companion patches:
- https://github.com/WebAssembly/binaryen/pull/4223
- https://github.com/emscripten-core/emscripten/pull/15266
Reviewed By: sbc100
Differential Revision: https://reviews.llvm.org/D111388
The currently implementation of funcrefs is broken since it is putting
the funcref itself on the stack before the call_indirect. Instead what
should be on the stack is the constant 0, which is the index at which
we store the funcref in __funcref_call_table.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D111152
This is a non-functional change to remove the duplicate
WasmAddressSpace enum and refactor reftype predicates by moving them
to the Utilities source file.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D111144
We previously had a limitation that TLS variables could not
be exported (and therefore could also not be imported). This
change removed that limitation.
Differential Revision: https://reviews.llvm.org/D108877
This ISD node/wrapper represents am address which is relative to a base
address and therefore lowers to `i32.const` rather than `global.get`.
Use this wrapper type for TLS-relative addresses, paving the way for the
non-REL wrapper to be used to external TLS address once those are
supported.
Differential Revision: https://reviews.llvm.org/D109179
Previously extra wide v4f32 to v4f64 extending loads would be legalized to v2f32
to v2f64 extending loads, which would then be scalarized by legalization. (v2f32
to v2f64 extending loads not produced by legalization were already being emitted
correctly.) Instead, mark v2f32 to v2f64 extending loads as legal and explicitly
lower them using promote_low. This regresses the addressing modes supported for
the extloads not produced by legalization, but that's a fine trade off for now.
Differential Revision: https://reviews.llvm.org/D108496
Fixes PR51605 in which a DAG combine and legalization sequence generated
out-of-range constants in BUILD_VECTOR lanes. In the v16i8 case, the constants
were 255, which would be in range if DAG ISel used unsigned constants, but it is
out of range because DAG ISel uses signed constants.
Differential Revision: https://reviews.llvm.org/D108669
The convert_low and promote_low instructions can widen the lower two lanes of a
four-lane vector, but we were previously scalarizing patterns that widened lanes
besides the low two lanes. The commit adds a shuffle to move the widened lanes
into the low lane positions so the convert_low and promote_low instructions can
be used instead of scalarizing.
Depends on D108266.
Differential Revision: https://reviews.llvm.org/D108341
Since the simplest DAG patterns for convert_low and promote_low instructions
involved v2i32, v2f32, v4i64, and v4f64 types, which are not legal in the
WebAssembly backend and would be eliminated by type legalization, we were
previously matching those patterns in a DAG combine before the type legalization
stage. However in cases where the vectors were wider than 128 bits, the patterns
we matched were not created until the type legalization stage when the wide
vectors were split up. Type legalization would continue to eliminate the illegal
types we were matching as well, so the code ended up scalarized.
To make the ISel for these instructions more robust, match the scalarized
patterns rather than the patterns containing illegal types. Add tests with
double-wide vectors to show that this works as intended.
Fixes PR51098.
Depends on D107502.
Differential Revision: https://reviews.llvm.org/D108266
The default legalization of unsupported vector types is to promote the integers
in each lane, which leads to extra sign or zero extending and masking when
moving data into and out of vectors. Switch our preferred type legalization from
the default to vector widening, which keeps the data in the low lanes of the
vector rather than in the low bits of each lane. The unused high lanes can be
ignored.
Half-wide vectors are now loaded from memory into the low 64 bits of the v128
rather than spread out among the lanes. As a result, v128.load64_splat is a much
more common operation, so add new patterns to support it.
Differential Revision: https://reviews.llvm.org/D107502
`catch` instruction can have any number of result values depending on
its tag, but so far we have only needed a single i32 return value for
C++ exception so the instruction was specified that way. But using the
instruction for SjLj handling requires multiple return values.
This makes `catch` instruction's results variadic and moves selection of
`throw` and `catch` instruction from ISelLowering to ISelDAGToDAG.
Moving `catch` to ISelDAGToDAG is necessary because I am not aware of
a good way to do instruction selection for variadic output instructions
in TableGen. This also moves `throw` because 1. `throw` and `catch`
share the same utility function and 2. there is really no reason we
should do that in ISelLowering in the first place. What we do is mostly
the same in both places, and moving them to ISelDAGToDAG allows us to
remove unnecessary mid-level nodes for `throw` and `catch` in
WebAssemblyISD.def and WebAssemblyInstrInfo.td.
This also adds handling for new `catch` instruction to AsmTypeCheck.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D107423
- Rename `wasm.catch` intrinsic to `wasm.catch.exn`, because we are
planning to add a separate `wasm.catch.longjmp` intrinsic which
returns two values.
- Rename several variables
- Remove an unnecessary parameter from `canLongjmp` and `isEmAsmCall`
from LowerEmscriptenEHSjLj pass
- Add `-verify-machineinstrs` in a test for a safety measure
- Add more comments + fix some errors in comments
- Replace `std::vector` with `SmallVector` for cases likely with small
number of elements
- Renamed `EnableEH`/`EnableSjLj` to `EnableEmEH`/`EnableEmSjLj`: We are
soon going to add `EnableWasmSjLj`, so this makes the distincion
clearer
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D107405
This optimizes out the mask when the result of a bitmask is interpreted as an i8
or i16 value. Resolves PR50507.
Differential Revision: https://reviews.llvm.org/D107103
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D104797
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal instruction selection patterns. The wasm_simd128.h
intrinsics header was already using portable code for the corresponding
intrinsics, so now it produces the correct instructions.
Differential Revision: https://reviews.llvm.org/D106400
Replace the experimental clang builtins and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50435.
Differential Revision: https://reviews.llvm.org/D106019
Replace the experimental clang builtin and LLVM intrinsics for these
instructions with normal codegen patterns. Resolves PR50433.
Differential Revision: https://reviews.llvm.org/D105950
Replace the clang builtin function and LLVM intrinsic for
f32x4.demote_zero_f64x2 with combines from normal SDNodes. Also add missing
combines for i32x4.trunc_sat_zero_f64x2_{s,u}, which share the same pattern.
Differential Revision: https://reviews.llvm.org/D105755
Replace the clang builtin function and LLVM intrinsic previously used to select
the f64x2.promote_low_f32x4 instruction with custom combines from standard
SelectionDAG nodes. Implement the new combines to share code with the similar
combines for f64x2.convert_low_i32x4_{s,u}. Resolves PR50232.
Differential Revision: https://reviews.llvm.org/D105675
Override the `shouldScalarizeBinop` target lowering hook using the same
implementation used in the x86 backend. This causes `extract_vector_elt`s of
vector binary ops to be scalarized if the scalarized version would be supported.
Differential Revision: https://reviews.llvm.org/D105646
Reland of 31859f896.
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Differential Revision: https://reviews.llvm.org/D104797
This change implements new DAG notes GLOBAL_GET/GLOBAL_SET, and
lowering methods for load and stores of reference types from IR
globals. Once the lowering creates the new nodes, tablegen pattern
matches those and converts them to Wasm global.get/set.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D95425
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch adds TargetStackID::WasmLocal. This stack holds locations of
values that are only addressable by name -- not via a pointer to memory.
For the WebAssembly target, these objects are lowered to WebAssembly
local variables, which are managed by the WebAssembly run-time and are
not addressable by linear memory.
For the WebAssembly target IR indicates that an AllocaInst should be put
on TargetStackID::WasmLocal by putting it in the non-integral address
space WASM_ADDRESS_SPACE_WASM_VAR, with value 1. SROA will mostly lift
these allocations to SSA locals, but any alloca that reaches instruction
selection (usually in non-optimized builds) will be assigned the new
TargetStackID there. Loads and stores to those values are transformed
to new WebAssemblyISD::LOCAL_GET / WebAssemblyISD::LOCAL_SET nodes,
which then lower to the type-specific LOCAL_GET_I32 etc instructions via
tablegen patterns.
Differential Revision: https://reviews.llvm.org/D101140
This patch adds support for WebAssembly globals in LLVM IR, representing
them as pointers to global values, in a non-default, non-integral
address space. Instruction selection legalizes loads and stores to
these pointers to new WebAssemblyISD nodes GLOBAL_GET and GLOBAL_SET.
Once the lowering creates the new nodes, tablegen pattern matches those
and converts them to Wasm global.get/set of the appropriate type.
Based on work by Paulo Matos in https://reviews.llvm.org/D95425.
Reviewed By: pmatos
Differential Revision: https://reviews.llvm.org/D101608
The WebAssembly SIMD intrinsics in wasm_simd128.h generally try not to require
any particular alignment for memory operations to be maximally flexible. For
builtin memory access functions and their corresponding LLVM IR intrinsics,
there's no way to set the expected alignment, so the best we can do is set the
alignment to 1 in the backend. This change means that the alignment hints in the
emitted code will no longer be incorrect when users use the intrinsics to access
unaligned data.
Differential Revision: https://reviews.llvm.org/D101850
Kazu Hirata