- requires existing debug information to be present
- fixes up file name and line number information in metadata
- emits a "<orig_filename>-debug.ll" succinct IR file (without !dbg metadata
or debug intrinsics) that can be read by a debugger
- initialize pass in opt tool to enable the "-debug-ir" flag
- lit tests to follow
llvm-svn: 181467
The two nested loops were confusing and also conservative in identifying
reduction variables. This patch replaces them by a worklist based approach.
llvm-svn: 181369
We were passing an i32 to ConstantInt::get where an i64 was needed and we must
also pass the sign if we pass negatives numbers. The start index passed to
getConsecutiveVector must also be signed.
Should fix PR15882.
llvm-svn: 181286
Test case by Michele Scandale!
Fixes PR10293: Load not hoisted out of loop with multiple exits.
There are few regressions with this patch, now tracked by
rdar:13817079, and a roughly equal number of improvements. The
regressions are almost certainly back luck because LoopRotate has very
little idea of whether rotation is profitable. Doing better requires a
more comprehensive solution.
This checkin is a quick fix that lacks generality (PR10293 has
a counter-example). But it trivially fixes the case in PR10293 without
interfering with other cases, and it does satify the criteria that
LoopRotate is a loop canonicalization pass that should avoid
heuristics and special cases.
I can think of two approaches that would probably be better in
the long run. Ultimately they may both make sense.
(1) LoopRotate should check that the current header would make a good
loop guard, and that the loop does not already has a sufficient
guard. The artifical SimplifiedLoopLatch check would be unnecessary,
and the design would be more general and canonical. Two difficulties:
- We need a strong guarantee that we won't endlessly rotate, so the
analysis would need to be precise in order to avoid the
SimplifiedLoopLatch precondition.
- Analysis like this are usually based on SCEV, which we don't want to
rely on.
(2) Rotate on-demand in late loop passes. This could even be done by
shoving the loop back on the queue after the optimization that needs
it. This could work well when we find LICM opportunities in
multi-branch loops. This requires some work, and it doesn't really
solve the problem of SCEV wanting a loop guard before the analysis.
llvm-svn: 181230
A * (1 - (uitofp i1 C)) -> select C, 0, A
B * (uitofp i1 C) -> select C, B, 0
select C, 0, A + select C, B, 0 -> select C, B, A
These come up in code that has been hand-optimized from a select to a linear blend,
on platforms where that may have mattered. We want to undo such changes
with the following transform:
A*(1 - uitofp i1 C) + B*(uitofp i1 C) -> select C, A, B
llvm-svn: 181216
We used to disable constant merging not only if a constant is llvm.used, but
also if an alias of a constant is llvm.used. This change fixes that.
llvm-svn: 181175
Add support for min/max reductions when "no-nans-float-math" is enabled. This
allows us to assume we have ordered floating point math and treat ordered and
unordered predicates equally.
radar://13723044
llvm-svn: 181144
This function consists of following steps:
1. Collect dependent memory accesses.
2. Analyze availability.
3. Perform fully redundancy elimination, or
4. Perform PRE, depending on the availability
Step 2, 3 and 4 are now moved to three helper routines.
llvm-svn: 181047
By supporting the vectorization of PHINodes with more than two incoming values we can increase the complexity of nested if statements.
We can now vectorize this loop:
int foo(int *A, int *B, int n) {
for (int i=0; i < n; i++) {
int x = 9;
if (A[i] > B[i]) {
if (A[i] > 19) {
x = 3;
} else if (B[i] < 4 ) {
x = 4;
} else {
x = 5;
}
}
A[i] = x;
}
}
llvm-svn: 181037
Actually it took me couple of hours trying to make sense of them and
only to find they are dead code. I guess the original author used
"allSingleSucc" to indicate if there are any critial edge emanating
from some blocks, and tried to perform code motion (actually speculation)
in the presence of these critical edges; but later on he/she changed mind
and decided to perform edge-splitting first.
llvm-svn: 180951
the things, and renames it to CBindingWrapping.h. I also moved
CBindingWrapping.h into Support/.
This new file just contains the macros for defining different wrap/unwrap
methods.
The calls to those macros, as well as any custom wrap/unwrap definitions
(like for array of Values for example), are put into corresponding C++
headers.
Doing this required some #include surgery, since some .cpp files relied
on the fact that including Wrap.h implicitly caused the inclusion of a
bunch of other things.
This also now means that the C++ headers will include their corresponding
C API headers; for example Value.h must include llvm-c/Core.h. I think
this is harmless, since the C API headers contain just external function
declarations and some C types, so I don't believe there should be any
nasty dependency issues here.
llvm-svn: 180881
This reverts commit r180802
There's ongoing discussion about whether this is the right place to make
this transformation. Reverting for now while we figure it out.
llvm-svn: 180834
Always fold a shuffle-of-shuffle into a single shuffle when there's only one
input vector in the first place. Continue to be more conservative when there's
multiple inputs.
rdar://13402653
PR15866
llvm-svn: 180802
This fixes the optimization introduced in r179748 and reverted in r179750.
While the optimization was sound, it did not properly respect differences in
bit-width.
llvm-svn: 180777
This resurrects r179957, but adds code that makes sure we don't touch
atomic/volatile stores:
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case where the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
llvm-svn: 180731
Turning retains into retainRV calls disrupts the data flow analysis in
ObjCARCOpts. Thus we move it as late as we can by moving it into
ObjCARCContract.
We leave in the conversion from retainRV -> retain in ObjCARCOpt since
it enables the dataflow analysis.
rdar://10813093
llvm-svn: 180698
When Reassociator optimize "(x | C1)" ^ "(X & C2)", it may swap the two
subexpressions, however, it forgot to swap cached constants (of C1 and C2)
accordingly.
rdar://13739160
llvm-svn: 180676
Since we can't guarantee that the original dbg.declare instrinsic
is removed by LowerDbgDeclare(), we need to make sure that we are
not inserting the same dbg.value intrinsic over and over.
This removes tons of redundant DIEs when compiling optimized code.
rdar://problem/13056109
llvm-svn: 180615
This reverts commit r180222.
I think this might tie in with a different problem which will require a
different approach potentially. I am reverting this in the case I need to go
down that second path.
My apologies for the noise. = /.
llvm-svn: 180590
Due to the semantics of ARC, we must be extremely conservative with autorelease
calls inserted by the frontend since ARC gaurantees that said object will be in
the autorelease pool after that point, an optimization invariant that the
optimizer must respect.
On the other hand, we are allowed significantly more flexibility with
autoreleaseRV instructions.
Often times though this flexibility is disrupted by early transformations which
transform objc_autoreleaseRV => objc_autorelease if said instruction is no
longer being used as part of an RV pair (generally due to inlining). Since we
can not tell the difference in between an autorelease put into place by the
frontend and one created through said ``strength reduction'' we can not perform
these optimizations.
The addition of this set gets around said issues by allowing us to differentiate
in between said two cases.
rdar://problem/13697741.
llvm-svn: 180222
This patch disables memory-instruction vectorization for types that need padding
bytes, e.g., x86_fp80 has 10 bytes store size with 6 bytes padding in darwin on
x86_64. Because the load/store vectorization is performed by the bit casting to
a packed vector, which has incompatible memory layout due to the lack of padding
bytes, the present vectorizer produces inconsistent result for memory
instructions of those types.
This patch checks an equality of the AllocSize of a scalar type and allocated
size for each vector element, to ensure that there is no padding bytes and the
array can be read/written using vector operations.
Patch by Daisuke Takahashi!
Fixes PR15758.
llvm-svn: 180196
debug location. This solves a problem where range of an inlined
subroutine is emitted wrongly.
Patch by Manman Ren.
Fixes rdar://problem/12415623
llvm-svn: 180140
even if erroneously annotated with the parallel loop metadata.
Fixes Bug 15794:
"Loop Vectorizer: Crashes with the use of llvm.loop.parallel metadata"
llvm-svn: 180081
This is an edge case that can happen if we modify a chain of multiple selects.
Update all operands in that case and remove the assert. PR15805.
llvm-svn: 179982
There is the temptation to make this tranform dependent on target information as
it is not going to be beneficial on all (sub)targets. Therefore, we should
probably do this in MI Early-Ifconversion.
This reverts commit r179957. Original commit message:
"SimplifyCFG: If convert single conditional stores
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up."
llvm-svn: 179980
This will make it clearer when we are actually resetting a sequence's progress
vs just changing state. This is an important distinction because the former case
clears any pointers that we are tracking while the later does not.
llvm-svn: 179963
This transformation will transform a conditional store with a preceeding
uncondtional store to the same location:
a[i] =
may-alias with a[i] load
if (cond)
a[i] = Y
into an unconditional store.
a[i] = X
may-alias with a[i] load
tmp = cond ? Y : X;
a[i] = tmp
We assume that on average the cost of a mispredicted branch is going to be
higher than the cost of a second store to the same location, and that the
secondary benefits of creating a bigger basic block for other optimizations to
work on outway the potential case were the branch would be correctly predicted
and the cost of the executing the second store would be noticably reflected in
performance.
hmmer's execution time improves by 30% on an imac12,2 on ref data sets. With
this change we are on par with gcc's performance (gcc also performs this
transformation). There was a 1.2 % performance improvement on a ARM swift chip.
Other tests in the test-suite+external seem to be mostly uninfluenced in my
experiments:
This optimization was triggered on 41 tests such that the executable was
different before/after the patch. Only 1 out of the 40 tests (dealII) was
reproducable below 100% (by about .4%). Given that hmmer benefits so much I
believe this to be a fair trade off.
I am going to watch performance numbers across the builtbots and will revert
this if anything unexpected comes up.
llvm-svn: 179957
The logic that actually compares the types considers pointers and integers the
same if they are of the same size. This created a strange mismatch between hash
and reality and made the test case for this fail on some platforms (yay,
test cases).
llvm-svn: 179905
Also make some static function class functions to avoid having to mention the
class namespace for enums all the time.
No functionality change intended.
llvm-svn: 179886
A min/max operation is represented by a select(cmp(lt/le/gt/ge, X, Y), X, Y)
sequence in LLVM. If we see such a sequence we can treat it just as any other
commutative binary instruction and reduce it.
This appears to help bzip2 by about 1.5% on an imac12,2.
radar://12960601
llvm-svn: 179773
This occurs due to an alloca representing a separate ownership from the
original pointer. Thus consider the following pseudo-IR:
objc_retain(%a)
for (...) {
objc_retain(%a)
%block <- %a
F(%block)
objc_release(%block)
}
objc_release(%a)
From the perspective of the optimizer, the %block is a separate
provenance from the original %a. Thus the optimizer pairs up the inner
retain for %a and the outer release from %a, resulting in segfaults.
This is fixed by noting that the signature of a mismatch of
retain/releases inside the for loop is a Use/CanRelease top down with an
None bottom up (since bottom up the Retain-CanRelease-Use-Release
sequence is completed by the inner objc_retain, but top down due to the
differing provenance from the objc_release said sequence is not
completed). In said case in CheckForCFGHazards, we now clear the state
of %a implying that no pairing will occur.
Additionally a test case is included.
rdar://12969722
llvm-svn: 179747
If a switch instruction has a case for every possible value of its type,
with the same successor, SimplifyCFG would replace it with an icmp ult,
but the computation of the bound overflows in that case, which inverts
the test.
Patch by Jed Davis!
llvm-svn: 179587
Two return types are not equivalent if one is a pointer and the other is an
integral. This is because we cannot bitcast a pointer to an integral value.
PR15185
llvm-svn: 179569
One performs: (X == 13 | X == 14) -> X-13 <u 2
The other: (A == C1 || A == C2) -> (A & ~(C1 ^ C2)) == C1
The problem is that there are certain values of C1 and C2 that
trigger both transforms but the first one blocks out the second,
this generates suboptimal code.
Reordering the transforms should be better in every case and
allows us to do interesting stuff like turn:
%shr = lshr i32 %X, 4
%and = and i32 %shr, 15
%add = add i32 %and, -14
%tobool = icmp ne i32 %add, 0
into:
%and = and i32 %X, 240
%tobool = icmp ne i32 %and, 224
llvm-svn: 179493
This is basically the same fix in three different places. We use a set to avoid
walking the whole tree of a big ConstantExprs multiple times.
For example: (select cmp, (add big_expr 1), (add big_expr 2))
We don't want to visit big_expr twice here, it may consist of thousands of
nodes.
The testcase exercises this by creating an insanely large ConstantExprs out of
a loop. It's questionable if the optimizer should ever create those, but this
can be triggered with real C code. Fixes PR15714.
llvm-svn: 179458
When trying to collapse sequences of insertelement/extractelement
instructions into single shuffle instructions, there is one specific
case where the Instruction Combiner wrongly updates the resulting
Mask of shuffle indexes.
The problem is in function CollectShuffleElments.
If we have a sequence of insert/extract element instructions
like the one below:
%tmp1 = extractelement <4 x float> %LHS, i32 0
%tmp2 = insertelement <4 x float> %RHS, float %tmp1, i32 1
%tmp3 = extractelement <4 x float> %RHS, i32 2
%tmp4 = insertelement <4 x float> %tmp2, float %tmp3, i32 3
Where:
. %RHS will have a mask of [4,5,6,7]
. %LHS will have a mask of [0,1,2,3]
The Mask of shuffle indexes is wrongly computed to [4,1,6,7]
instead of [4,0,6,7].
When analyzing %tmp2 in order to compute the Mask for the
resulting shuffle instruction, the algorithm forgets to update
the mask index at position 1 with the index associated to the
element extracted from %LHS by instruction %tmp1.
Patch by Andrea DiBiagio!
llvm-svn: 179291
This commit adds the infrastructure for performing bottom-up SLP vectorization (and other optimizations) on parallel computations.
The infrastructure has three potential users:
1. The loop vectorizer needs to be able to vectorize AOS data structures such as (sum += A[i] + A[i+1]).
2. The BB-vectorizer needs this infrastructure for bottom-up SLP vectorization, because bottom-up vectorization is faster to compute.
3. A loop-roller needs to be able to analyze consecutive chains and roll them into a loop, in order to reduce code size. A loop roller does not need to create vector instructions, and this infrastructure separates the chain analysis from the vectorization.
This patch also includes a simple (100 LOC) bottom up SLP vectorizer that uses the infrastructure, and can vectorize this code:
void SAXPY(int *x, int *y, int a, int i) {
x[i] = a * x[i] + y[i];
x[i+1] = a * x[i+1] + y[i+1];
x[i+2] = a * x[i+2] + y[i+2];
x[i+3] = a * x[i+3] + y[i+3];
}
llvm-svn: 179117
I brazenly think this change is slightly simpler than r178793 because:
- no "state" in functor
- "OpndPtrs[i]" looks simpler than "&Opnds[OpndIndices[i]]"
While I can reproduce the probelm in Valgrind, it is rather difficult to come up
a standalone testing case. The reason is that when an iterator is invalidated,
the stale invalidated elements are not yet clobbered by nonsense data, so the
optimizer can still proceed successfully.
Thank Benjamin for fixing this bug and generously providing the test case.
llvm-svn: 179062
The fix for PR14972 in r177055 introduced a real think-o in the *store*
side, likely because I was much more focused on the load side. While we
can arbitrarily widen (or narrow) a loaded value, we can't arbitrarily
widen a value to be stored, as that changes the width of memory access!
Lock down the code path in the store rewriting which would do this to
only handle the intended circumstance.
All of the existing tests continue to pass, and I've added a test from
the PR.
llvm-svn: 178974
The normal dataflow sequence in the ARC optimizer consists of the following
states:
Retain -> CanRelease -> Use -> Release
The optimizer before this patch stored the uses that determine the lifetime of
the retainable object pointer when it bottom up hits a retain or when top down
it hits a release. This is correct for an imprecise lifetime scenario since what
we are trying to do is remove retains/releases while making sure that no
``CanRelease'' (which is usually a call) deallocates the given pointer before we
get to the ``Use'' (since that would cause a segfault).
If we are considering the precise lifetime scenario though, this is not
correct. In such a situation, we *DO* care about the previous sequence, but
additionally, we wish to track the uses resulting from the following incomplete
sequences:
Retain -> CanRelease -> Release (TopDown)
Retain <- Use <- Release (BottomUp)
*NOTE* This patch looks large but the most of it consists of updating
test cases. Additionally this fix exposed an additional bug. I removed
the test case that expressed said bug and will recommit it with the fix
in a little bit.
llvm-svn: 178921
This optimization is unstable at this moment; it
1) block us on a very important application
2) PR15200
3) test6 and test7 in test/Transforms/ScalarRepl/dynamic-vector-gep.ll
(the CHECK command compare the output against wrong result)
I personally believe this optimization should not have any impact on the
autovectorized code, as auto-vectorizer is supposed to put gather/scatter
in a "right" way. Although in theory downstream optimizaters might reveal
some gather/scatter optimization opportunities, the chance is quite slim.
For the hand-crafted vectorizing code, in term of redundancy elimination,
load-CSE, copy-propagation and DSE can collectively achieve the same result,
but in much simpler way. On the other hand, these optimizers are able to
improve the code in a incremental way; in contrast, SROA is sort of all-or-none
approach. However, SROA might slighly win in stack size, as it tries to figure
out a stretch of memory tightenly cover the area accessed by the dynamic index.
rdar://13174884
PR15200
llvm-svn: 178912
Pass down the fact that an operand is going to be a vector of constants.
This should bring the performance of MultiSource/Benchmarks/PAQ8p/paq8p on x86
back. It had degraded to scalar performance due to my pervious shift cost change
that made all shifts expensive on x86.
radar://13576547
llvm-svn: 178809
OpndPtrs stored pointers into the Opnd vector that became invalid when the
vector grows. Store indices instead. Sadly I only have a large testcase that
only triggers under valgrind, so I didn't include it.
llvm-svn: 178793
Cleaned up trailing whitespace and added extra slashes in front of a
function level comment so that it follow the convention of having 3
slashes.
llvm-svn: 178712
The semantics of ARC implies that a pointer passed into an objc_autorelease
must live until some point (potentially down the stack) where an
autorelease pool is popped. On the other hand, an
objc_autoreleaseReturnValue just signifies that the object must live
until the end of the given function at least.
Thus objc_autorelease is stronger than objc_autoreleaseReturnValue in
terms of the semantics of ARC* implying that performing the given
strength reduction without any knowledge of how this relates to
the autorelease pool pop that is further up the stack violates the
semantics of ARC.
*Even though objc_autoreleaseReturnValue if you know that no RV
optimization will occur is more computationally expensive.
llvm-svn: 178612
The iterator could be invalidated when it's recursively deleting a whole bunch
of constant expressions in a constant initializer.
Note: This was only reproducible if `opt' was run on a `.bc' file. If `opt' was
run on a `.ll' file, it wouldn't crash. This is why the test first pushes the
`.ll' file through `llvm-as' before feeding it to `opt'.
PR15440
llvm-svn: 178531
clang.arc.used is an interesting call for ARC since ObjCARCContract
needs to run to remove said intrinsic to avoid a linker error (since the
call does not exist).
llvm-svn: 178369
Since we handle optimizable objc_retainBlocks through strength reduction
in OptimizableIndividualCalls, we know that all code after that point
will only see non-optimizable objc_retainBlock calls. IsForwarding is
only called by functions after that point, so it is ok to just classify
objc_retainBlock as non-forwarding.
<rdar://problem/13249661>.
llvm-svn: 178285
If an objc_retainBlock has the copy_on_escape metadata attached to it
AND if the block pointer argument only escapes down the stack, we are
allowed to strength reduce the objc_retainBlock to to an objc_retain and
thus optimize it.
Current there is logic in the ARC data flow analysis to handle
this case which is complicated and involved making distinctions in
between objc_retainBlock and objc_retain in certain places and
considering them the same in others.
This patch simplifies said code by:
1. Performing the strength reduction in the initial ARC peephole
analysis (ObjCARCOpts::OptimizeIndividualCalls).
2. Changes the ARC dataflow analysis (which runs after the peephole
analysis) to consider all objc_retainBlock calls to not be optimizable
(since if the call was optimizable, we would have strength reduced it
already).
This patch leaves in the infrastructure in the ARC dataflow analysis to
handle this case, which due to 2 will just be dead code. I am doing this
on purpose to separate the removal of the old code from the testing of
the new code.
<rdar://problem/13249661>.
llvm-svn: 178284
If we compile a single source program, the `.gcda' file will be generated where
the program was executed. This isn't desirable, because that place may be at an
unpredictable place (the program could call `chdir' for instance).
Instead, we will output the `.gcda' file in the same place we output the `.gcno'
file. I.e., the directory where the executable was generated. This matches GCC's
behavior.
<rdar://problem/13061072> & PR11809
llvm-svn: 178084
The OptimizeIntToFloatBitCast converts shift-truncate sequences
into extractelement operations. The computation of the element
index to be used in the resulting operation is currently only
correct for little-endian targets.
This commit fixes the element index computation to be correct
for big-endian targets as well. If the target byte order is
unknown, the optimization cannot be performed at all.
llvm-svn: 178031
This will allow for verification and analysis of the merge function of
the data flow analyses in the ARC optimizer.
The actual implementation of this feature is by introducing calls to
the functions llvm.arc.annotation.{bottomup,topdown}.{bbstart,bbend}
which are only declared. Each such call takes in a pointer to a global
with the same name as the pointer whose provenance is being tracked and
a pointer whose name is one of our Sequence states and points to a
string that contains the same name.
To ensure that the optimizer does not consider these annotations in any
way, I made it so that the annotations are considered to be of IC_None
type.
A test case is included for this commit and the previous
ObjCARCAnnotation commit.
llvm-svn: 177952
Previously the inner works of the data flow analysis in ObjCARCOpts was hard to
get out of the optimizer for analysis of bugs or testing. All of the current ARC
unit tests are based off of testing the effect of the data flow
analysis (i.e. what statements are removed or moved, etc.). This creates
weakness in the current unit testing regimem since we are not actually testing
what effects various instructions have on the modeled pointer state.
Additionally in order to analyze a bug in the optimizer, one would need to track
by hand what the optimizer was actually doing either through use of DEBUG
statements or through the usage of a debugger, both yielding large loses in
developer productivity.
This patch deals with these two issues by providing ARC annotation
metadata that annotates instructions with the state changes that they cause in
various pointers as well as provides metadata to annotate provenance sources.
Specifically, we introduce the following metadata types:
1. llvm.arc.annotation.bottomup.
2. llvm.arc.annotation.topdown.
3. llvm.arc.annotation.provenancesource.
llvm.arc.annotation.{bottomup,topdown}: These annotations describes a state
change in a pointer when we are visiting instructions bottomup/topdown
respectively. The output format for both is the same:
!1 = metadata !{metadata !"(test,%x)", metadata !"S_Release", metadata !"S_Use"}
The first element is a string tuple with the following format:
(function,variable name)
The second two elements of the metadata show the previous state of the
pointer (in this case S_Release) and the new state of the pointer (S_Use). We
write the metadata in such a manner to ensure that it is easy for outside tools
to parse. This is important since I am currently working on a tool for taking
this information and pretty printing it besides the IR and that can be used for
LIT style testing via the generation of an index.
llvm.arc.annotation.provenancesource: This metadata is used to annotate
instructions which act as provenance sources, i.e. ones that introduce a
new (from the optimizer's perspective) non-argument pointer to track. This
enables cross-referencing in between provenance sources and the state changes
that occur to them.
This is still a work in progress. Additionally I plan on committing
later today additions to the annotations that annotate at the top/bottom
of basic blocks the state of the various pointers being tracked.
*NOTE* The metadata support is conditionally compiled into libObjCARCOpts only
when we are producing a debug build of llvm/clang and even so are
disabled by default. To enable the annotation metadata, pass in
-enable-objc-arc-annotations to opt.
llvm-svn: 177951
The problem is that the code mistakenly took for granted that following constructor
is able to create an APFloat from a *SIGNED* integer:
APFloat::APFloat(const fltSemantics &ourSemantics, integerPart value)
rdar://13486998
llvm-svn: 177906
This simplification happens at 2 places :
- using the nsw attribute when the shl / mul is used by a sign test
- when the shl / mul is compared for (in)equality to zero
llvm-svn: 177856
Before: the function name was stored by the compiler as a constant string
and the run-time was printing it.
Now: the PC is stored instead and the run-time prints the full symbolized frame.
This adds a couple of instructions into every function with non-empty stack frame,
but also reduces the binary size because we store less strings (I saw 2% size reduction).
This change bumps the asan ABI version to v3.
llvm part.
Example of report (now):
==31711==ERROR: AddressSanitizer: stack-buffer-overflow on address 0x7fffa77cf1c5 at pc 0x41feb0 bp 0x7fffa77cefb0 sp 0x7fffa77cefa8
READ of size 1 at 0x7fffa77cf1c5 thread T0
#0 0x41feaf in Frame0(int, char*, char*, char*) stack-oob-frames.cc:20
#1 0x41f7ff in Frame1(int, char*, char*) stack-oob-frames.cc:24
#2 0x41f477 in Frame2(int, char*) stack-oob-frames.cc:28
#3 0x41f194 in Frame3(int) stack-oob-frames.cc:32
#4 0x41eee0 in main stack-oob-frames.cc:38
#5 0x7f0c5566f76c (/lib/x86_64-linux-gnu/libc.so.6+0x2176c)
#6 0x41eb1c (/usr/local/google/kcc/llvm_cmake/a.out+0x41eb1c)
Address 0x7fffa77cf1c5 is located in stack of thread T0 at offset 293 in frame
#0 0x41f87f in Frame0(int, char*, char*, char*) stack-oob-frames.cc:12 <<<<<<<<<<<<<< this is new
This frame has 6 object(s):
[32, 36) 'frame.addr'
[96, 104) 'a.addr'
[160, 168) 'b.addr'
[224, 232) 'c.addr'
[288, 292) 's'
[352, 360) 'd'
llvm-svn: 177724
The original code used i32, and i64 if legal. This introduced unneeded
casts when they aren't legal, or when the index variable i has another
type. In order of preference: try to use i's type; use the smallest
fitting legal type (using an added DataLayout method); default to i32.
A testcase checks that this works when the index gep operand is i16.
Patch by : Ahmed Bougacha <ahmed.bougacha@gmail.com>
Reviewed by : Duncan
llvm-svn: 177712
How did this ever work?
Basically, if you have a function that's inlined into the caller, it may not
have any 'call' instructions, but any 'resume' instructions it may have should
still be forwarded to the outer (caller's) landing pad. This requires that all
of the 'landingpad' instructions in the callee have their clauses merged with
the caller's outer 'landingpad' instruction (hence the bit of ugly code in the
`forwardResume' method).
Testcase in a follow commit to the test-suite repository.
<rdar://problem/13360379> & PR15555
llvm-svn: 177680
The key part of this is ensuring that name prefixes remain in a Twine
form until we get to a point where we can nuke them under NDEBUG. This
is tricky using the old APIs as they played fast and loose with Twine,
which is prone to serious error. The inserter is much cleaner as it is
actually in the call stack leading to the setName call, and so has
a good opportunity to prepend the prefix.
This matters more than you might imagine because most runs over an
alloca find a single partition, and rewrite 3 or 4 instructions
referring to it. As a consequence doing this lazily and exclusively with
Twine allows the optimizer to delete more of it and shaves another 2% to
3% off of the release build's SROA run time for PR15412. I also think
the APIs are cleaner, and the use of Twine is more reliable, so
I consider it a win-win despite the churn required to reach this state.
llvm-svn: 177631
The simplify-libcalls pass implemented a doInitialization hook to infer
function prototype attributes for well-known functions. Given that the
simplify-libcalls pass is going away *and* that the functionattrs pass
is already in place to deduce function attributes, I am moving this logic
to the functionattrs pass. This approach was discussed during patch
review:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20121126/157465.html.
llvm-svn: 177619
Use the new `llvm_gcov_init' function to register the writeout and flush
functions. The initialization function will also call `atexit' for some cleanups
and final writout calls. But it does this only once. This is better than
checking for the `main' function, because in a library that function may not
exist.
<rdar://problem/12439551>
llvm-svn: 177579
This is espcially important because the new SROA pass goes to great
lengths to provide helpful names for debugging, and as a consequence
they can become very slow to render.
Good for between 5% and 15% of the SROA runtime on some slow test cases
such as the one in PR15412.
llvm-svn: 177495
We don't want to write out >1000 files at the same time. That could make things
prohibitively expensive. Instead, register the "writeout" function so that it's
emitted serially.
<rdar://problem/12439551>
llvm-svn: 177437
- it is trivially known to be used inside the loop in a way that can not be optimized away
- there is no use outside of the loop which can take advantage of the computation hoisting
llvm-svn: 177432
For each compile unit, we want to register a function that will flush that
compile unit. Otherwise, __gcov_flush() would only flush the counters within the
current compile unit, and not any outside of it.
PR15191 & <rdar://problem/13167507>
llvm-svn: 177340
Rules include:
1)1 x*y +/- x*z => x*(y +/- z)
(the order of operands dosen't matter)
2) y/x +/- z/x => (y +/- z)/x
The transformation is disabled if the new add/sub expr "y +/- z" is a
denormal/naz/inifinity.
rdar://12911472
llvm-svn: 177088
The fundamental problem is that SROA didn't allow for overly wide loads
where the bits past the end of the alloca were masked away and the load
was sufficiently aligned to ensure there is no risk of page fault, or
other trapping behavior. With such widened loads, SROA would delete the
load entirely rather than clamping it to the size of the alloca in order
to allow mem2reg to fire. This was exposed by a test case that neatly
arranged for GVN to run first, widening certain loads, followed by an
inline step, and then SROA which miscompiles the code. However, I see no
reason why this hasn't been plaguing us in other contexts. It seems
deeply broken.
Diagnosing all of the above took all of 10 minutes of debugging. The
really annoying aspect is that fixing this completely breaks the pass.
;] There was an implicit reliance on the fact that no loads or stores
extended past the alloca once we decided to rewrite them in the final
stage of SROA. This was used to encode information about whether the
loads and stores had been split across multiple partitions of the
original alloca. That required threading explicit tracking of whether
a *use* of a partition is split across multiple partitions.
Once that was done, another problem arose: we allowed splitting of
integer loads and stores iff they were loads and stores to the entire
alloca. This is a really arbitrary limitation, and splitting at least
some integer loads and stores is crucial to maximize promotion
opportunities. My first attempt was to start removing the restriction
entirely, but currently that does Very Bad Things by causing *many*
common alloca patterns to be fully decomposed into i8 operations and
lots of or-ing together to produce larger integers on demand. The code
bloat is terrifying. That is still the right end-goal, but substantial
work must be done to either merge partitions or ensure that small i8
values are eagerly merged in some other pass. Sadly, figuring all this
out took essentially all the time and effort here.
So the end result is that we allow splitting only when the load or store
at least covers the alloca. That ensures widened loads and stores don't
hurt SROA, and that we don't rampantly decompose operations more than we
have previously.
All of this was already fairly well tested, and so I've just updated the
tests to cover the wide load behavior. I can add a test that crafts the
pass ordering magic which caused the original PR, but that seems really
brittle and to provide little benefit. The fundamental problem is that
widened loads should Just Work.
llvm-svn: 177055
constructs default arguments. It can now take default arguments from
cl::opt'ions. Add a new -default-gcov-version=... option, and actually test it!
Sink the reverse-order of the version into GCOVProfiling, hiding it from our
users.
llvm-svn: 177002
emitProfileNotes(), similar to emitProfileArcs(). Also update its comment.
Also add a comment on Version[4] (there will be another comment in clang later),
and compress lines that exceeded 80 columns.
llvm-svn: 176994
Nadav reported a performance regression due to the work I did to
merge the library call simplifier into instcombine [1]. The issue
is that a new LibCallSimplifier object is being created whenever
InstCombiner::runOnFunction is called. Every time a LibCallSimplifier
object is used to optimize a call it creates a hash table to map from
a function name to an object that optimizes functions of that name.
For short-lived LibCallSimplifier instances this is quite inefficient.
Especially for cases where no calls are actually simplified.
This patch fixes the issue by dropping the hash table and implementing
an explicit lookup function to correlate the function name to the object
that optimizes functions of that name. This avoids the cost of always
building and destroying the hash table in cases where the LibCallSimplifier
object is short-lived and avoids the cost of building the table when no
simplifications are actually preformed.
On a benchmark containing 100,000 calls where none of them are simplified
I noticed a 30% speedup. On a benchmark containing 100,000 calls where
all of them are simplified I noticed an 8% speedup.
[1] http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20130304/167639.html
llvm-svn: 176840
We want vectorization to happen at -g. Ignore calls to the dbg.value intrinsic
and don't transfer them to the vectorized code.
radar://13378964
llvm-svn: 176768
it. Fortunately, versions of gcov that predate the extra checksum also ignore
any extra data, so this isn't a problem. There will be a matching commit in
compiler-rt.
llvm-svn: 176745
into the actual gcov file.
Instead of using the bottom 4 bytes as the function identifier, use a counter.
This makes the identifier numbers stable across multiple runs.
llvm-svn: 176616
Fixes rdar:13349374.
Volatile loads and stores need to be preserved even if the language
standard says they are undefined. "volatile" in this context means "get
out of the way compiler, let my platform handle it".
Additionally, this is the only way I know of with llvm to write to the
first page (when hardware allows) without dropping to assembly.
llvm-svn: 176599
When considering folding a bitcast of an alloca into the alloca itself,
make sure we don't shrink the amount of memory being allocated, or
things rapidly go sideways.
rdar://13324424
llvm-svn: 176547
* Only apply divide bypass optimization when not optimizing for size.
* Fixed bug caused by constant for 0 value of type Int32,
used dividend type to generate the constant instead.
* For atom x86-64 apply the divide bypass to use 16-bit divides instead of
64-bit divides when operand values are small enough.
* Added lit tests for 64-bit divide bypass.
Patch by Tyler Nowicki!
llvm-svn: 176442
The LoopVectorizer often runs multiple times on the same function due to inlining.
When this happens the loop vectorizer often vectorizes the same loops multiple times, increasing code size and adding unneeded branches.
With this patch, the vectorizer during vectorization puts metadata on scalar loops and marks them as 'already vectorized' so that it knows to ignore them when it sees them a second time.
PR14448.
llvm-svn: 176399
The instcombine recognized pattern looks like:
a = b * c
d = a +/- Cst
or
a = b * c
d = Cst +/- a
When creating the new operands for fadd or fsub instruction following the related fmul, the first operand was created with the second original operand (M0 was created with C1) and the second with the first (M1 with Opnd0).
The fix consists in creating the new operands with the appropriate original operand, i.e., M0 with Opnd0 and M1 with C1.
llvm-svn: 176300
Shadow checks are disabled and memory loads always produce fully initialized
values in functions that don't have a sanitize_memory attribute. Value and
argument shadow is propagated as usual.
This change also updates blacklist behaviour to match the above.
llvm-svn: 176247
This properly asks TargetLibraryInfo if a call is available and if it is, it
can be translated into the corresponding LLVM builtin. We don't vectorize sqrt()
yet because I'm not sure about the semantics for negative numbers. The other
intrinsic should be exact equivalents to the libm functions.
Differential Revision: http://llvm-reviews.chandlerc.com/D465
llvm-svn: 176188
enhancement done the trivial way; by extending inputs and truncating outputs
which is addequate for targets with little or no support for integer arithmetic
on integer types less than 32 bits.
llvm-svn: 176139
These are two related changes (one in llvm, one in clang).
LLVM:
- rename address_safety => sanitize_address (the enum value is the same, so we preserve binary compatibility with old bitcode)
- rename thread_safety => sanitize_thread
- rename no_uninitialized_checks -> sanitize_memory
CLANG:
- add __attribute__((no_sanitize_address)) as a synonym for __attribute__((no_address_safety_analysis))
- add __attribute__((no_sanitize_thread))
- add __attribute__((no_sanitize_memory))
for S in address thread memory
If -fsanitize=S is present and __attribute__((no_sanitize_S)) is not
set llvm attribute sanitize_S
llvm-svn: 176075
This is a common pattern with dyn_cast and similar constructs, when the
PHI no longer depends on the select it can often be turned into a simpler
construct or even get hoisted out of the loop.
PR15340.
llvm-svn: 175995
The 'nobuiltin' attribute is applied to call sites to indicate that LLVM should
not treat the callee function as a built-in function. I.e., it shouldn't try to
replace that function with different code.
llvm-svn: 175835
Storing the load/store instructions with the values
and inspect them using Alias Analysis to make sure
they don't alias, since the GEP pointer operand doesn't
take the offset into account.
Trying hard to not add any extra cost to loads and stores
that don't overlap on global values, AA is *only* calculated
if all of the previous attempts failed.
Using biggest vector register size as the stride for the
vectorization access, as we're being conservative and
the cost model (which calculates the real vectorization
factor) is only run after the legalization phase.
We might re-think this relationship in the future, but
for now, I'd rather be safe than sorry.
llvm-svn: 175818
This patch makes asan instrument memory accesses with unusual sizes (e.g. 5 bytes or 10 bytes), e.g. long double or
packed structures.
Instrumentation is done with two 1-byte checks
(first and last bytes) and if the error is found
__asan_report_load_n(addr, real_size) or
__asan_report_store_n(addr, real_size)
is called.
Also, call these two new functions in memset/memcpy
instrumentation.
asan-rt part will follow.
llvm-svn: 175507
This fixes PR15289. This bug was introduced (recently) in r175215; collecting
all std::vector references for candidate pairs to delete at once is invalid
because subsequent lookups in the owning DenseMap could invalidate the
references.
bugpoint was able to reduce a useful test case. Unfortunately, because whether
or not this asserts depends on memory layout, this test case will sometimes
appear to produce valid output. Nevertheless, running under valgrind will
reveal the error.
llvm-svn: 175397
(or (bool?A:B),(bool?C:D)) --> (bool?(or A,C):(or B,D))
By the time the OR is visited, both the SELECTs have been visited and not
optimized and the OR itself hasn't been transformed so we do this transform in
the hopes that the new ORs will be optimized.
The transform is explicitly disabled for vector-selects until "codegen matures
to handle them better".
Patch by Muhammad Tauqir!
llvm-svn: 175380
Several functions and variable names used the term 'tree' to refer
to what is actually a DAG. Correcting this mistake will, hopefully,
prevent confusion in the future.
No functionality change intended.
llvm-svn: 175278
It enables to work with a smaller constant, which is target friendly for those which can compare to immediates.
It also avoids inserting a shift in favor of a trunc, which can be free on some targets.
This used to work until LLVM-3.1, but regressed with the 3.2 release.
llvm-svn: 175270
For some basic blocks, it is possible to generate many candidate pairs for
relatively few pairable instructions. When many (tens of thousands) of these pairs
are generated for a single instruction group, the time taken to generate and
rank the different vectorization plans can become quite large. As a result, we now
cap the number of candidate pairs within each instruction group. This is done by
closing out the group once the threshold is reached (set now at 3000 pairs).
Although this will limit the overall compile-time impact, this may not be the best
way to achieve this result. It might be better, for example, to prune excessive
candidate pairs after the fact the prevent the generation of short, but highly-connected
groups. We can experiment with this in the future.
This change reduces the overall compile-time slowdown of the csa.ll test case in
PR15222 to ~5x. If 5x is still considered too large, a lower limit can be
used as the default.
This represents a functionality change, but only for very large inputs
(thus, there is no regression test).
llvm-svn: 175251
All instances of std::multimap have now been replaced by
DenseMap<K, std::vector<V> >, and this yields a speedup of 5% on the
csa.ll test case from PR15222.
No functionality change intended.
llvm-svn: 175216
This is another commit on the road to removing std::multimap from
BBVectorize. This gives an ~1% speedup on the csa.ll test case
in PR15222.
No functionality change intended.
llvm-svn: 175215
It's possible (e.g. after an LTO build) that an internal global may be used for
debugging purposes. If that's the case appending a '.b' to it makes it hard to
find that variable. Steal the name from the old GV before deleting it so that
they can find that variable again.
llvm-svn: 175104
When building the pairable-instruction dependency map, don't search
past the last pairable instruction. For large blocks that have been
divided into multiple instruction groups, searching past the last
instruction in each group is very wasteful. This gives a 32% speedup
on the csa.ll test case from PR15222 (when using 50 instructions
in each group).
No functionality change intended.
llvm-svn: 174915
This map is queried only for instructions in pairs of pairable
instructions; so make sure that only pairs of pairable
instructions are added to the map. This gives a 3.5% speedup
on the csa.ll test case from PR15222.
No functionality change intended.
llvm-svn: 174914
This eliminates one more linear search over a range of
std::multimap entries. This gives a 22% speedup on the
csa.ll test case from PR15222.
No functionality change intended.
llvm-svn: 174893
This flag makes asan use a small (<2G) offset for 64-bit asan shadow mapping.
On x86_64 this saves us a register, thus achieving ~2/3 of the
zero-base-offset's benefits in both performance and code size.
Thanks Jakub Jelinek for the idea.
llvm-svn: 174886
This removes the last of the linear searches over ranges of std::multimap
iterators, giving a 7% speedup on the doduc.bc input from PR15222.
No functionality change intended.
llvm-svn: 174859
Profiling suggests that getInstructionTypes is performance-sensitive,
this cleans up some double-casting in that function in favor of
using dyn_cast.
No functionality change intended.
llvm-svn: 174857
By itself, this does not have much of an effect, but only because in the default
configuration the full cycle checks are used only for small problem sizes.
This is part of a general cleanup of uses of iteration over std::multimap
ranges only for the purpose of checking membership.
No functionality change intended.
llvm-svn: 174856
This reverts r171041. This was a nice idea that didn't work out well.
Clang warnings need to be associated with warning groups so that they can
be selectively disabled, promoted to errors, etc. This simplistic patch didn't
allow for that. Enhancing it to provide some way for the backend to specify
a front-end warning type seems like overkill for the few uses of this, at
least for now.
llvm-svn: 174748
This is a follow-up to the cost-model change in r174713 which splits
the cost of a memory operation between the address computation and the
actual memory access. In r174713, this cost is always added to the
memory operation cost, and so BBVectorize will do the same.
Currently, this new cost function is used only by ARM, and I don't
have any ARM test cases for BBVectorize. Assistance in generating some
good ARM test cases for BBVectorize would be greatly appreciated!
llvm-svn: 174743
isn't using the default calling convention. However, if the transformation is
from a call to inline IR, then the calling convention doesn't matter.
rdar://13157990
llvm-svn: 174724
Adds a function to target transform info to query for the cost of address
computation. The cost model analysis pass now also queries this interface.
The code in LoopVectorize adds the cost of address computation as part of the
memory instruction cost calculation. Only there, we know whether the instruction
will be scalarized or not.
Increase the penality for inserting in to D registers on swift. This becomes
necessary because we now always assume that address computation has a cost and
three is a closer value to the architecture.
radar://13097204
llvm-svn: 174713
We don't want too many classes in a pass and the classes obscure the details. I
was going a little overboard with object modeling here. Replace classes by
generic code that handles both loads and stores.
No functionality change intended.
llvm-svn: 174646
1. Moved a comment from ObjCARCOpts.cpp -> ObjCARCContract.cpp.
2. Removed a comment from ObjCARCOpts.cpp that was already moved to
ObjCARCAliasAnalysis.h/.cpp.
llvm-svn: 174581
In the loop vectorizer cost model, we used to ignore stores/loads of a pointer
type when computing the widest type within a loop. This meant that if we had
only stores/loads of pointers in a loop we would return a widest type of 8bits
(instead of 32 or 64 bit) and therefore a vector factor that was too big.
Now, if we see a consecutive store/load of pointers we use the size of a pointer
(from data layout).
This problem occured in SingleSource/Benchmarks/Shootout-C++/hash.cpp (reduced
test case is the first test in vector_ptr_load_store.ll).
radar://13139343
llvm-svn: 174377
says, but that's a defect (to be filed). "Cls::purevfn()" is still an odr use.
Also fixes a bug in the previous patch that caused us to not mark the function
referenced just because we didn't want to mark it odr used.
llvm-svn: 174240
the SCEV vector size in LoopStrengthReduce. It is observed that
the BaseRegs vector size is 4 in most cases,
and elements are frequently copied when it is initialized as
SmallVector<const SCEV *, 2> BaseRegs.
Our benchmark results show that the compilation time performance
improved by ~0.5%.
Patch by Wan Xiaofei.
llvm-svn: 174219
This is a re-worked version of r174048.
Given source IR:
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !14), !dbg !15
we used to generate
call void @llvm.dbg.declare(metadata !27, metadata !28), !dbg !29!27 = metadata !{null}
With this patch, we will correctly generate
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !27), !dbg !28
Looking up %argc.addr in ValueMap will return null, since %argc.addr is already
correctly set up, we can use identity mapping.
rdar://problem/13089880
llvm-svn: 174093
Given source IR:
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !14), !dbg !15
we used to generate
call void @llvm.dbg.declare(metadata !27, metadata !28), !dbg !29!27 = metadata !{null}
With this patch, we will correctly generate
call void @llvm.dbg.declare(metadata !{i32* %argc.addr}, metadata !27), !dbg !28
Looking up %argc.addr in ValueMap will return null, since %argc.addr is already
correctly set up, we can use identity mapping.
llvm-svn: 173946
This was missed since whenever I was including ObjCARCAliasAnalysis.h, I
was including ObjCARC.h before it which included these includes
(resulting in no compilation breakage).
llvm-svn: 173764
This also required adding 2x headers Dependency Analysis.h/Provenance Analysis.h
and a .cpp file DependencyAnalysis.cpp to unentangle the dependencies inbetween
ObjCARCContract and ObjCARCOpts.
llvm-svn: 173760
Because BBVectorize may significantly shorten a loop body, unroll
again after vectorization. This is especially important when using
runtime or partial unrolling.
llvm-svn: 173730
It is way too slow. Change the default option value to 0.
Always do exact shadow propagation for unsigned ICmp with constants, it is
cheap (under 1% cpu time) and required for correctness.
llvm-svn: 173682
When flipping the pair of subvectors that form a vector, if the
vector length is 2, we can use the SK_Reverse shuffle kind to get
more-accurate cost information. Also we can use the SK_ExtractSubvector
shuffle kind to get accurate subvector extraction costs.
The current cost model implementations don't yet seem complex enough
for this to make a difference (thus, there are no test cases with this
commit), but it should help in future.
Depending on how the various targets optimize and combine shuffles in
practice, we might be able to get more-accurate costs by combining the
costs of multiple shuffle kinds. For example, the cost of flipping the
subvector pairs could be modeled as two extractions and two subvector
insertions. These changes, however, should probably be motivated
by specific test cases.
llvm-svn: 173621
This name change does the following:
1. Causes the function name to use proper ARC terminology.
2. Makes it clear what the function truly does.
llvm-svn: 173609
In the future, AttributeWithIndex won't be used anymore. Besides, it exposes the
internals of the AttributeSet to outside users, which isn't goodness.
llvm-svn: 173602
In the future, AttributeWithIndex won't be used anymore. Besides, it exposes the
internals of the AttributeSet to outside users, which isn't goodness.
llvm-svn: 173601
In the future, AttributeWithIndex won't be used anymore. Besides, it exposes the
internals of the AttributeSet to outside users, which isn't goodness.
llvm-svn: 173600
The 'getSlot' function and its ilk allow introspection into the AttributeSet
class. However, that class should be opaque. Allow access through accessor
methods instead.
llvm-svn: 173522
Only for integers, pointers, and vectors of those. No floats.
Instrumentation seems very heavy, and may need to be replaced
with some approximation in the future.
llvm-svn: 173452
loops over instructions in the basic block or the use-def list of the
value, neither of which are really efficient when repeatedly querying
about values in the same basic block.
What's more, we already know that the CondBB is small, and so we can do
a much more efficient test by counting the uses in CondBB, and seeing if
those account for all of the uses.
Finally, we shouldn't blanket fail on any such instruction, instead we
should conservatively assume that those instructions are part of the
cost.
Note that this actually fixes a bug in the pass because
isUsedInBasicBlock has a really terrible bug in it. I'll fix that in my
next commit, but the fix for it would make this code suddenly take the
compile time hit I thought it already was taking, so I wanted to go
ahead and migrate this code to a faster & better pattern.
The bug in isUsedInBasicBlock was also causing other tests to test the
wrong thing entirely: for example we weren't actually disabling
speculation for floating point operations as intended (and tested), but
the test passed because we failed to speculate them due to the
isUsedInBasicBlock failure.
llvm-svn: 173417
Original commit message:
Plug TTI into the speculation logic, giving it a real cost interface
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
llvm-svn: 173357
that can be specialized by targets.
The goal here is not to be more aggressive, but to just be more accurate
with very obvious cases. There are instructions which are known to be
truly free and which were not being modeled as such in this code -- see
the regression test which is distilled from an inner loop of zlib.
Everywhere the TTI cost model is insufficiently conservative I've added
explicit checks with FIXME comments to go add proper modelling of these
cost factors.
If this causes regressions, the likely solution is to make TTI even more
conservative in its cost estimates, but test cases will help here.
llvm-svn: 173342
a cost fuction that seems both a bit ad-hoc and also poorly suited to
evaluating constant expressions.
Notably, it is missing any support for trivial expressions such as
'inttoptr'. I could fix this routine, but it isn't clear to me all of
the constraints its other users are operating under.
The core protection that seems relevant here is avoiding the formation
of a select instruction wich a further chain of select operations in
a constant expression operand. Just explicitly encode that constraint.
Also, update the comments and organization here to make it clear where
this needs to go -- this should be driven off of real cost measurements
which take into account the number of constants expressions and the
depth of the constant expression tree.
llvm-svn: 173340
terms of cost rather than hoisting a single instruction.
This does *not* change the cost model! We still set the cost threshold
at 1 here, it's just that we track it by accumulating cost rather than
by storing an instruction.
The primary advantage is that we no longer leave no-op intrinsics in the
basic block. For example, this will now move both debug info intrinsics
and a single instruction, instead of only moving the instruction and
leaving a basic block with nothing bug debug info intrinsics in it, and
those intrinsics now no longer ordered correctly with the hoisted value.
Instead, we now splice the entire conditional basic block's instruction
sequence.
This also places the code for checking the safety of hoisting next to
the code computing the cost.
Currently, the only observable side-effect of this change is that debug
info intrinsics are no longer abandoned. I'm not sure how to craft
a test case for this, and my real goal was the refactoring, but I'll
talk to Dave or Eric about how to add a test case for this.
llvm-svn: 173339
Previously, the code would scan the PHI nodes and build up a small
setvector of candidate value pairs in phi nodes to go and rewrite. Once
certain the rewrite could be performed, the code walks the set, and for
each one re-scans the entire PHI node list looking for nodes to rewrite
operands.
Instead, scan the PHI nodes once to check for hazards, and then scan it
a second time to rewrite the operands to selects. No set vector, and
a max of two scans.
The only downside is that we might form identical selects, but
instcombine or anything else should fold those easily, and it seems
unlikely to happen often.
llvm-svn: 173337
pretty in doxygen, adding some of the details actually present in
a classic example where this matters (a loop from gzip and many other
compression algorithms), and a cautionary note about the risks inherent
in the transform. This has come up on the mailing lists recently, and
I suspect folks reading this code could benefit from going and looking
at the MI pass that can really deal with these issues.
llvm-svn: 173329
used uninitialized, since it fails to understand that Array is only used when
SingleValue is not, and outputs a warning. It also seems generally safer given
that the constructor is non-trivial and has plenty of early exits.
llvm-svn: 173242
SSPStrong applies a heuristic to insert stack protectors in these situations:
* A Protector is required for functions which contain an array, regardless of
type or length.
* A Protector is required for functions which contain a structure/union which
contains an array, regardless of type or length. Note, there is no limit to
the depth of nesting.
* A protector is required when the address of a local variable (i.e., stack
based variable) is exposed. (E.g., such as through a local whose address is
taken as part of the RHS of an assignment or a local whose address is taken as
part of a function argument.)
This patch implements the SSPString attribute to be equivalent to
SSPRequired. This will change in a subsequent patch.
llvm-svn: 173230
Collections of attributes are handled via the AttributeSet class now. This
finally frees us up to make significant changes to how attributes are structured.
llvm-svn: 173228
The method PerformCodePlacement was doing too much (i.e. 3x loops, lots of
different checking). This refactoring separates the analysis section of the
method into a separate function while leaving the actual code placement and
analysis preparation in PerformCodePlacement.
*NOTE* Really this part of ObjCARC should be refactored out of the main pass
class into its own seperate class/struct. But, it is not time to make that
change yet though (don't want to make such an invasive change without fixing all
of the bugs first).
llvm-svn: 173201
Use the AttributeSet when we're talking about more than one attribute. Add a
function that adds a single attribute. No functionality change intended.
llvm-svn: 173196
generic function calls and intrinsics. This is somewhat overlapping with
an existing intrinsic cost method, but that one seems targetted at
vector intrinsics. I'll merge them or separate their names and use cases
in a separate commit.
This sinks the test of 'callIsSmall' down into TTI where targets can
control it. The whole thing feels very hack-ish to me though. I've left
a FIXME comment about the fundamental design problem this presents. It
isn't yet clear to me what the users of this function *really* care
about. I'll have to do more analysis to figure that out. Putting this
here at least provides it access to proper analysis pass tools and other
such. It also allows us to more cleanly implement the baseline cost
interfaces in TTI.
With this commit, it is now theoretically possible to simplify much of
the inline cost analysis's handling of calls by calling through to this
interface. That conversion will have to happen in subsequent commits as
it requires more extensive restructuring of the inline cost analysis.
The CodeMetrics class is now really only in the business of running over
a block of code and aggregating the metrics on that block of code, with
the actual cost evaluation done entirely in terms of TTI.
llvm-svn: 173148
This is more code to isolate the use of the Attribute class to that of just
holding one attribute instead of a collection of attributes.
llvm-svn: 173094
is free. The whole CodeMetrics API should probably be reworked more, but
this is enough to allow deleting the duplicate code there for computing
whether an instruction is free.
All of the passes using this have been updated to pull in TTI and hand
it to the CodeMetrics stuff. Further, a dead CodeMetrics API
(analyzeFunction) is nuked for lack of users.
llvm-svn: 173036
a dynamic analysis done on each call to the routine. However, now it can
use the standard pass infrastructure to reference other analyses,
instead of a silly setter method. This will become more interesting as
I teach it about more analysis passes.
This updates the two inliner passes to use the inline cost analysis.
Doing so highlights how utterly redundant these two passes are. Either
we should find a cheaper way to do always inlining, or we should merge
the two and just fiddle with the thresholds to get the desired behavior.
I'm leaning increasingly toward the latter as it would also remove the
Inliner sub-class split.
llvm-svn: 173030
We ignore the cpu frontend and focus on pipeline utilization. We do this because we
don't have a good way to estimate the loop body size at the IR level.
llvm-svn: 172964
This separates the check for "too few elements to run the vector loop" from the
"memory overlap" check, giving a lot nicer code and allowing to skip the memory
checks when we're not going to execute the vector code anyways. We still leave
the decision of whether to emit the memory checks as branches or setccs, but it
seems to be doing a good job. If ugly code pops up we may want to emit them as
separate blocks too. Small speedup on MultiSource/Benchmarks/MallocBench/espresso.
Most of this is legwork to allow multiple bypass blocks while updating PHIs,
dominators and loop info.
llvm-svn: 172902
Because the Attribute class is going to stop representing a collection of
attributes, limit the use of it as an aggregate in favor of using AttributeSet.
This replaces some of the uses for querying the function attributes.
llvm-svn: 172844
Specifically according to the semantics of ARC -fno-objc-arc-exception simply
states that it is expected that the unwind path out of a call *MAY* not release
objects. Thus we can have the situation where a release gets moved into a catch
block which we ignore when we remove a retain/release pair resulting in (even
though we assume the program is exiting anyways) the cleanup code path
potentially blowing up before program exit.
llvm-svn: 172599
some optimization opportunities (in the enclosing supper-expressions).
rule 1. (-0.0 - X ) * Y => -0.0 - (X * Y)
if expression "-0.0 - X" has only one reference.
rule 2. (0.0 - X ) * Y => -0.0 - (X * Y)
if expression "0.0 - X" has only one reference, and
the instruction is marked "noSignedZero".
2. Eliminate negation (The compiler was already able to handle these
opt if the 0.0s are replaced with -0.0.)
rule 3: (0.0 - X) * (0.0 - Y) => X * Y
rule 4: (0.0 - X) * C => X * -C
if the expr is flagged "noSignedZero".
3.
Rule 5: (X*Y) * X => (X*X) * Y
if X!=Y and the expression is flagged with "UnsafeAlgebra".
The purpose of this transformation is two-fold:
a) to form a power expression (of X).
b) potentially shorten the critical path: After transformation, the
latency of the instruction Y is amortized by the expression of X*X,
and therefore Y is in a "less critical" position compared to what it
was before the transformation.
4. Remove the InstCombine code about simplifiying "X * select".
The reasons are following:
a) The "select" is somewhat architecture-dependent, therefore the
higher level optimizers are not able to precisely predict if
the simplification really yields any performance improvement
or not.
b) The "select" operator is bit complicate, and tends to obscure
optimization opportunities. It is btter to keep it as low as
possible in expr tree, and let CodeGen to tackle the optimization.
llvm-svn: 172551
---------------------------------------------------------------------------
C_A: reassociation is allowed
C_R: reciprocal of a constant C is appropriate, which means
- 1/C is exact, or
- reciprocal is allowed and 1/C is neither a special value nor a denormal.
-----------------------------------------------------------------------------
rule1: (X/C1) / C2 => X / (C2*C1) (if C_A)
=> X * (1/(C2*C1)) (if C_A && C_R)
rule 2: X*C1 / C2 => X * (C1/C2) if C_A
rule 3: (X/Y)/Z = > X/(Y*Z) (if C_A && at least one of Y and Z is symbolic value)
rule 4: Z/(X/Y) = > (Z*Y)/X (similar to rule3)
rule 5: C1/(X*C2) => (C1/C2) / X (if C_A)
rule 6: C1/(X/C2) => (C1*C2) / X (if C_A)
rule 7: C1/(C2/X) => (C1/C2) * X (if C_A)
llvm-svn: 172488
The reason that this occurs is that tail calling objc_autorelease eventually
tail calls -[NSObject autorelease] which supports fast autorelease. This can
cause us to violate the semantic gaurantees of __autoreleasing variables that
assignment to an __autoreleasing variables always yields an object that is
placed into the innermost autorelease pool.
The fix included in this patch works by:
1. In the peephole optimization function OptimizeIndividualFunctions, always
remove tail call from objc_autorelease.
2. Whenever we convert to/from an objc_autorelease, set/unset the tail call
keyword as appropriate.
*NOTE* I also handled the case where objc_autorelease is converted in
OptimizeReturns to an autoreleaseRV which still violates the ARC semantics. I
will be removing that in a later patch and I wanted to make sure that the tree
is in a consistent state vis-a-vis ARC always.
Additionally some test cases are provided and all tests that have tail call marked
objc_autorelease keywords have been modified so that tail call has been removed.
*NOTE* One test fails due to a separate bug that I am going to commit soon. Thus
I marked the check line TMP: instead of CHECK: so make check does not fail.
llvm-svn: 172287
Specifically:
1. Added a missing new line when we emit a debug message saying that we are marking a global variable as constant.
2. Added debug messages that describe what is occuring when GlobalOpt is evaluating a block/function.
3. Added a debug message that says what specific constructor is being evaluated.
llvm-svn: 172247
We don't have a detailed analysis on which values are vectorized and which stay scalars in the vectorized loop so we use
another method. We look at reduction variables, loads and stores, which are the only ways to get information in and out
of loop iterations. If the data types are extended and truncated then the cost model will catch the cost of the vector
zext/sext/trunc operations.
llvm-svn: 172178
This fixes va_start/va_copy of a va_list field which happens to not
be laid out at a 16-byte boundary.
Differential Revision: http://llvm-reviews.chandlerc.com/D276
llvm-svn: 172128
1. Added debug messages when in OptimizeIndividualCalls we move calls into predecessors and then erase the original call.
2. Added debug messages when in the process of moving calls in ObjCARCOpt::MoveCalls we create new RR and delete old RR.
3. Added a debug message when we visit a specific retain instruction in ObjCARCOpt::PerformCodePlacement.
llvm-svn: 171988
small loops. On small loops post-loop that handles scalars (and runs slower) can take more time to execute than the
rest of the loop. This patch disables widening of loops with a small static trip count.
llvm-svn: 171798
o. X/C1 * C2 => X * (C2/C1) (if C2/C1 is neither special FP nor denormal)
o. X/C1 * C2 -> X/(C1/C2) (if C2/C1 is either specical FP or denormal, but C1/C2 is a normal Fp)
Let MDC denote multiplication or dividion with one & only one operand being a constant
o. (MDC ± C1) * C2 => (MDC * C2) ± (C1 * C2)
(so long as the constant-folding doesn't yield any denormal or special value)
llvm-svn: 171793
turning a code like this:
if (foo)
free(foo)
into that:
free(foo)
Move a call to free from basic block FB into FB's predecessor, P,
when the path from P to FB is taken only if the argument of free is
not equal to NULL.
Some restrictions apply on P and FB to be sure that this code motion
is profitable. Namely:
1. FB must have only one predecessor P.
2. FB must contain only the call to free plus an unconditional
branch to S.
3. P's successors are FB and S.
Because of 1., we will not increase the code size when moving the call
to free from FB to P.
Because of 2., FB will be empty after the move.
Because of 2. and 3., P's branch instruction becomes useless, so as FB
(simplifycfg will do the job).
llvm-svn: 171762
peculiar headers under include/llvm.
This struct still doesn't make a lot of sense, but it makes more sense
down in TargetLowering than it did before.
llvm-svn: 171739
already in a class, just inline the four of them. I suspect that this
class could be simplified some to not always keep distinct variables for
these things, but it wasn't clear to me how given the usage so I opted
for a trivial and mechanical translation.
This removes one of the two remaining users of a header in include/llvm
which does nothing more than define a 4 member struct.
llvm-svn: 171738
TargetTransformInfo rather than TargetLowering, removing one of the
primary instances of the layering violation of Transforms depending
directly on Target.
This is a really big deal because LSR used to be a "special" pass that
could only be tested fully using llc and by looking at the full output
of it. It also couldn't run with any other loop passes because it had to
be created by the backend. No longer is this true. LSR is now just
a normal pass and we should probably lift the creation of LSR out of
lib/CodeGen/Passes.cpp and into the PassManagerBuilder. =] I've not done
this, or updated all of the tests to use opt and a triple, because
I suspect someone more familiar with LSR would do a better job. This
change should be essentially without functional impact for normal
compilations, and only change behvaior of targetless compilations.
The conversion required changing all of the LSR code to refer to the TTI
interfaces, which fortunately are very similar to TargetLowering's
interfaces. However, it also allowed us to *always* expect to have some
implementation around. I've pushed that simplification through the pass,
and leveraged it to simplify code somewhat. It required some test
updates for one of two things: either we used to skip some checks
altogether but now we get the default "no" answer for them, or we used
to have no information about the target and now we do have some.
I've also started the process of removing AddrMode, as the TTI interface
doesn't use it any longer. In some cases this simplifies code, and in
others it adds some complexity, but I think it's not a bad tradeoff even
there. Subsequent patches will try to clean this up even further and use
other (more appropriate) abstractions.
Yet again, almost all of the formatting changes brought to you by
clang-format. =]
llvm-svn: 171735
being present. Make a member of one of the helper classes a reference as
part of this.
Reformatting goodness brought to you by clang-format.
llvm-svn: 171726
This makes the loop vectorizer match the pattern followed by roughly all
other passses. =]
Notably, this header file was braken in several regards: it contained
a using namespace directive, global #define's that aren't globaly
appropriate, and global constants defined directly in the header file.
As a side benefit, lots of the types in this file become internal, which
will cause the optimizer to chew on this pass more effectively.
llvm-svn: 171723
This could be simplified further, but Hal has a specific feature for
ignoring TTI, and so I preserved that.
Also, I needed to use it because a number of tests fail when switching
from a null TTI to the NoTTI nonce implementation. That seems suspicious
to me and so may be something that you need to look into Hal. I worked
it by preserving the old behavior for these tests with the flag that
ignores all target info.
llvm-svn: 171722
this patch brought to you by the tool clang-format.
I wanted to fix up the names of constructor parameters because they
followed a bit of an anti-pattern by naming initialisms with CamelCase:
'Tti', 'Se', etc. This appears to have been in an attempt to not overlap
with the names of member variables 'TTI', 'SE', etc. However,
constructor arguments can very safely alias members, and in fact that's
the conventional way to pass in members. I've fixed all of these I saw,
along with making some strang abbreviations such as 'Lp' be simpler 'L',
or 'Lgl' be the word 'Legal'.
However, the code I was touching had indentation and formatting somewhat
all over the map. So I ran clang-format and fixed them.
I also fixed a few other formatting or doxygen formatting issues such as
using ///< on trailing comments so they are associated with the correct
entry.
There is still a lot of room for improvement of the formating and
cleanliness of this code. ;] At least a few parts of the coding
standards or common practices in LLVM's code aren't followed, the enum
naming rules jumped out at me. I may mix some of these while I'm here,
but not all of them.
llvm-svn: 171719
I'm sorry for duplicating bad style here, but I wanted to keep
consistency. I've pinged the code review thread where this style was
reviewed and changes were requested.
llvm-svn: 171714
through as a reference rather than a pointer. There is always *some*
implementation of this available, so this simplifies code by not having
to test for whether it is available or not.
Further, it turns out there were piles of places where SimplifyCFG was
recursing and not passing down either TD or TTI. These are fixed to be
more pedantically consistent even though I don't have any particular
cases where it would matter.
llvm-svn: 171691
Daniel Malea