This patch adds 3 methods, one for power-of-2 vectors which use tree
reductions using vector ops, before a final reduction op. For non-pow-2
types it generates multiple narrow reductions and combines the values with
scalar ops.
Differential Revision: https://reviews.llvm.org/D97163
For imported pattern purposes, we have a custom rule that promotes the rotate
amount to 64b as well.
Differential Revision: https://reviews.llvm.org/D99463
Basically a port of isBitfieldExtractOpFromSExtInReg in AArch64ISelDAGToDAG.
This is only done post-legalization for now. Once the legalizer knows how to
decompose these back into shifts, this requirement can probably be removed.
Differential Revision: https://reviews.llvm.org/D99230
Without Zfh the half type isn't legal, but it could still be
used as an argument/return in IR. Clang will not generate this today.
Previously we promoted the half value to float for arguments and
returns if the F extension is enabled but Zfh isn't. Then depending on
which ABI is enabled we would pass it in either an FPR or a GPR in
float format.
If the F extension isn't enabled, it would get passed in the lower
16 bits of a GPR in half format.
With this patch the value will always in half format and will be
in the lower bits of a GPR or FPR. This should be consistent
with where the bits are located when Zfh is enabled.
I've based this implementation off of how this is done on ARM.
I've manually nan-boxed the value to 32 bits using integer ops.
It looks like flw, fsw, fmv.s, fmv.w.x, fmf.x.w won't
canonicalize nans so should leave the value alone. I think those
are the instructions that could get used on this value.
Reviewed By: kito-cheng
Differential Revision: https://reviews.llvm.org/D98670
This was crashing with the example from:
https://llvm.org/PR49716
...and that was avoided with a283d72583 ,
but as we can see from the SSE vs. AVX test code diff,
we can try harder to match the pattern.
This matcher code was adapted from another pmadd pattern
match in D49636, but it needs different ops to deal with
size mismatches.
Differential Revision: https://reviews.llvm.org/D99531
As another addition to MVE lane interleaving, this handles Splat shuffle
vectors, as the shuffle of a splat is a splat.
Differential Revision: https://reviews.llvm.org/D97291
The test shows that RA computes the spill weight independent on the
fact that statepoint instruction for var operands is ok to accept
this operand on stack. As a result the corresponding virtual register
evicts the other register which requires register for use.
It causes redundant fill operation.
MCJIT served well as the default JIT engine in lli for a long time, but the code is getting old and maintenance efforts don't seem to be in sight. In the meantime Orc became mature enough to fill that gap. The newly added greddy mode is very similar to the execution model of MCJIT. It should work as a drop-in replacement for common JIT tasks.
Reviewed By: lhames
Differential Revision: https://reviews.llvm.org/D98931
Empty functions (functions with no real code) are irrelevant for propeller optimizations and their addresses sometimes conflict with other functions which obfuscates the analysis.
This simple change skips the BB address map emission for such functions.
Reviewed By: tmsriram
Differential Revision: https://reviews.llvm.org/D99395
regbank-ceil.ll -> regbank-ceil.mir
The IR test was intended to only check register banks. This makes it brittle,
especially as we improve load/store combines in GlobalISel.
Rewriting this as a MIR test also makes it more consistent with the rest of
the testcases in GlobalISel.
Lookup tables generate non PIC-friendly code, which requires dynamic relocation as described in:
https://bugs.llvm.org/show_bug.cgi?id=45244
This patch adds a new pass that converts lookup tables to relative lookup tables to make them PIC-friendly.
Differential Revision: https://reviews.llvm.org/D94355
Currently performExtendCombine assumes that the src-element bitwidth * 2
is a valid MVT. But this is not the case for i1 and it causes a crash on
the v64i1 test cases added in this patch.
It turns out that this code appears to not be needed; the same patterns are
handled by other code and we end up with the same results, even without the
custom lowering. I also added additional test cases in a50037aaa6.
Let's just remove the unneeded code.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99437
If the successor block has a phi node, then additional moves may
be inserted into predecessors, which may clobber eflags. Don't try
to fold the with.overflow result into the branch in that case.
This is done by explicitly checking for any phis in successor
blocks, not sure if there's some more principled way to address
this. Other fused compare and branch patterns avoid the issue by
emitting the comparison when handling the branch, so that no
instructions may be inserted in between. In this case, the
with.overflow call is emitted separately (and I don't think this
is avoidable, as it will generally have at least two users).
Fixes https://bugs.llvm.org/show_bug.cgi?id=49587.
Differential Revision: https://reviews.llvm.org/D98600
Note, only src0 and src1 will be commuted if the isCommutable flag
is set. This patch does not change that, it just makes it possible
to commute src0 and src1 of more instructions.
Reviewed By: foad, rampitec
Differential Revision: https://reviews.llvm.org/D99376
Change-Id: I61e20490962d95ea429beb355c55f55c024dafdc
D89239 adjusts the stack offset of emergency spill slots for overaligned
stacks. However the adjustment is not valid for targets whose stack
grows up (such as AMDGPU).
This change makes the adjustment conditional only to those targets whose
stack grows down.
Fixes https://bugs.llvm.org/show_bug.cgi?id=49686
Differential Revision: https://reviews.llvm.org/D99504
This matches what we do in our isel patterns. In our internal
testing we've found this is needed to make the fast register
allocator happy at -O0. Otherwise it may assign V0 to an earlier
operand and find itself with no registers left when it reaches
the mask operand. By using V0 explicitly, the fast register allocator
will see it when it checks for phys register usages before it
starts allocating vregs. I'll try to update this with a test case.
Unfortunately, this does appear to prevent some instruction reordering
by the pre-RA scheduler which leads to the increased spills seen in
some tests. I suspect that problem could already occur for other
instructions that already used V0 directly.
There's a lot of repeated code here that could do with some
wrapper functions. Not sure if that should be at the level of the
new code that deals with V0. That would require multiple output
parameters to pass the glue, chain and register back. Maybe it
should be at a higher level over the entire set of push_backs.
Reviewed By: frasercrmck, HsiangKai
Differential Revision: https://reviews.llvm.org/D99367
Previously we only used RIP relative when PIC was enabled. But
we know we're in small/kernel code model here so we should
be able to always use RIP-relative which will give a smaller
encoding.
Here's a godbolt link that demonstrates the current codegen https://godbolt.org/z/j3158o
Note in the non-PIC version the load from .LCPI0_0 doesn't use
RIP-relative addressing, but if you change the constant in the
source from 0.0 to 1.0 it will become RIP-relative.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D97208
In D97111 we changed the RVV frame layout when using sp or bp to address
the stack slots so we could address the emergency stack slot. The idea
is to put the RVV objects as far as possible (in offset terms) from the
frame reference register (sp / fp / bp).
When using fp this happens naturally because the RVV objects are already
the top of the stack and due to the constraints of RVV (VLENB being a
power of two >= 128) the stack remains aligned. The rest of this summary
does not apply to this case.
When using sp / bp we need to skip the non-RVV stack slots. The size of
the the non-RVV objects is computed subtracting the callee saved
register size (whose computation is added in D97111 itself) to the total
size of the stack (which does not account for RVV stack slots). However,
when doing so we round to 16 bytes when computing that size and we end
emitting a smaller offset that may belong to a scalar stack slot (see
D98801). So this change removes that rounding.
Also, because we want the RVV objects be between the non-RVV stack slots
and the callee-saved register slots, we need to make sure the RVV
objects are properly aligned to 8 bytes. Adding a padding of 8 would
render the stack unaligned. So when allocating space for RVV (only when
we don't use fp) we need to have extra padding that preserves the stack
alignment. This way we can round to 8 bytes the offset that skips the
non-RVV objects and we do not misalign the whole stack in the way. In
some circumstances this means that the RVV objects may have padding
before (=lower offsets from sp/bp) and after (before the CSR stack
slots).
Differential Revision: https://reviews.llvm.org/D98802
This testcase shows that we attempt to assign the same offset sp + 16 to
two different stack objects.
The fix will come in a later change.
Differential Revision: https://reviews.llvm.org/D98801
While addressing RVV frame layout issues I found this file had
whitespace differences that made diffs noisier than they should be.
Differential Revision: https://reviews.llvm.org/D98800
This is currently performed in SelectionDAGLegalize, here we make it also
happen in LegalizeVectorOps, allowing a target to lower the SETCC condition
codes first in LegalizeVectorOps and then lower to a custom node afterwards,
without having to duplicate all of the SETCC condition legalization in the
target specific lowering.
As a result of this, fixed length floating point SETCC nodes can now be
properly lowered for SVE.
Differential Revision: https://reviews.llvm.org/D98939
This extends the recent MVE lane interleaving passto handle other
non-instruction leaves, for which a new shuffle is added. This helps
especially for constants and potentially for arguments.
Differential Revision: https://reviews.llvm.org/D97289
For these cases we need to extract the upper or lower elements,
multiply them using 16-bit multiplies and repack them.
Previously we used punpcklbw/punpckhbw+psraw or pmovsxbw+pshudfd to
extract and sign extend so we could use pmullw to compute the 16-bit
product and then shift down the high bits.
We can avoid the need to sign extend if we unpack the bytes into
the high byte of each word and fill the lower byte with 0 using
pxor. This puts the sign bit of each byte into the sign bit of
each word. Since the LHS and RHS have 8 trailing zeros, the full
32-bit product of those 16-bit values will have 16 trailing zeros.
This means the 16-bit product of the original bytes is in the upper
16 bits which we can calculate using pmulhw.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D98587
While working on D97208 I noticed that these greedy regular
expressions prevent tests from failing when (%rip) appears after
a constant pool label when it didn't before.
Reviewed By: RKSimon, pengfei
Differential Revision: https://reviews.llvm.org/D99460
MVE does not have a single sext/zext or trunc instruction that takes the
bottom half of a vector and extends to a full width, like NEON has with
MOVL. Instead it is expected that this happens through top/bottom
instructions. So the MVE equivalent VMOVLT/B instructions take either
the even or odd elements of the input and extend them to the larger
type, producing a vector with half the number of elements each of double
the bitwidth. As there is no simple instruction for a normal extend, we
often have to expand sext/zext/trunc into a series of lane moves (or
stack loads/stores, which we do not do yet).
This pass takes vector code that starts at truncs, looks for
interconnected blobs of operations that end with sext/zext and
transforms them by adding shuffles so that the lanes are interleaved and
the MVE VMOVL/VMOVN instructions can be used. This is done pre-ISel so
that it can work across basic blocks.
This initial version of the pass just handles a limited set of
instructions, not handling constants or splats or FP, which can all come
as extensions to this base.
Differential Revision: https://reviews.llvm.org/D95804
I think byval/sret and the others are close to being able to rip out
the code to support the missing type case. A lot of this code is
shared with inalloca, so catch this up to the others so that can
happen.
We have a special pattern for
(mul (and X, 0xffffffff), (and Y, 0xffffffff)), to optimize the
ANDs to shift. But if a sext_inreg coms first, we'll form a MULW
and limit the effectiveness of the special match. So this patch
adds a larger pattern to suppress the MULW formation by emitting
a sext.w and then the same output we use for the
(mul (and X, 0xffffffff), (and Y, 0xffffffff)). This should all
get CSEd.
This is the issue I was trying to fix with D99029, but that affected
many more tests.
See if the combined shuffle mask is equivalent to an identity shuffle, typically this is due to repeated LHS/RHS ops in horiz-ops, but isTargetShuffleEquivalent might see other patterns as well.
This is another small step towards getting rid of foldShuffleOfHorizOp and relying on canonicalizeShuffleMaskWithHorizOp and generic shuffle combining.
Amara Emerson