This is a 2nd try of:
3c8473ba53
which was reverted at:
a26312f9d4
because of crashing.
This version includes extra code and tests to avoid the known
crashing examples as discussed in PR49730.
Original commit message:
As noted in D98152, we need to patch SLP to avoid regressions when
we start canonicalizing to integer min/max intrinsics.
Most of the real work to make this possible was in:
7202f47508
Differential Revision: https://reviews.llvm.org/D98981
This was originally just an XFAIL test, but I modified it
to check output. To make that bot-friendly, I'm moving it
to the x86 dir since it specified an x86 target.
This reverts commit 3c8473ba53 and includes test diffs to
maintain testing status.
There's at least 1 place that was not updated with 7202f47508 ,
so we can crash mismatching select and intrinsics as shown in
PR49730.
The SCEV commit b46c085d2b [NFCI] SCEVExpander:
emit intrinsics for integral {u,s}{min,max} SCEV expressions
seems to reveal a new crash in SLPVectorizer.
SLP crashes expecting a SelectInst as an externally used value
but umin() call is found.
The patch relaxes the assumption to make the IR flag propagation safe.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D99328
We do not need to scan further if the upper end or lower end of the
basic block is reached already and the instruction is not found. It
means that the instruction is definitely in the lower part of basic
block or in the upper block relatively.
This should improve compile time for the very big basic blocks.
Differential Revision: https://reviews.llvm.org/D99266
Added getPointersDiff function to LoopAccessAnalysis and used it instead
direct calculatoin of the distance between pointers and/or
isConsecutiveAccess function in SLP vectorizer to improve compile time
and detection of stores consecutive chains.
Part of D57059
Differential Revision: https://reviews.llvm.org/D98967
Added getPointersDiff function to LoopAccessAnalysis and used it instead
direct calculatoin of the distance between pointers and/or
isConsecutiveAccess function in SLP vectorizer to improve compile time
and detection of stores consecutive chains.
Part of D57059
Differential Revision: https://reviews.llvm.org/D98967
As noted in D98152, we need to patch SLP to avoid regressions when
we start canonicalizing to integer min/max intrinsics.
Most of the real work to make this possible was in:
7202f47508
Differential Revision: https://reviews.llvm.org/D98981
Make sure we use PowerOf2Floor instead of PowerOf2Ceil when
calculating max number of elements that fits inside a vector
register (otherwise we could end up creating vectors larger
than the maximum vector register size).
Also make sure we honor the min/max VF (as given by TTI or
cmd line parameters) when doing vectorizeStores.
Reviewed By: anton-afanasyev
Differential Revision: https://reviews.llvm.org/D97691
If SLP vectorizer tries to extend the scheduling region and runs out of
the budget too early, but still extends the region to the new ending
instructions (i.e., it was able to extend the region for the first
instruction in the bundle, but not for the second), the compiler need to
recalculate dependecies in full, just like if the extending was
successfull. Without it, the schedule data chunks may end up with the
wrong number of (unscheduled) dependecies and it may end up with the
incorrect function, where the vectorized instruction does not dominate
on the extractelement instruction.
Differential Revision: https://reviews.llvm.org/D98531
Current SLP pass has this piece of code that inserts a trunc instruction
after the vectorized instruction. In the case that the vectorized instruction
is a phi node and not the last phi node in the BB, the trunc instruction
will be inserted between two phi nodes, which will trigger verify problem
in debug version or unpredictable error in another pass.
This patch changes the algorithm to 'if the last vectorized instruction
is a phi, insert it after the last phi node in current BB' to fix this problem.
Associative reduction matcher in SLP begins with select instruction but when
it reached call to llvm.umax (or alike) via def-use chain the latter also matched
as UMax kind. The routine's later code assumes matched instruction to be a select
and thus it merely died on the first encountered cast that did not fit.
Differential Revision: https://reviews.llvm.org/D98432
It is possible to merge reuse and reorder shuffles and reduce the total
cost of the vectorization tree/number of final instructions.
Differential Revision: https://reviews.llvm.org/D94992
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf working. ARM removed the fix in
dfac521da1, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
Pointer operand of scatter loads does not remain scalar in the tree (it
gest vectorized) and thus must not be marked as the scalar that remains
scalar in vectorized form.
Differential Revision: https://reviews.llvm.org/D96818
The vector reduction intrinsics started life as experimental ops, so backend support
was lacking. As part of promoting them to 1st-class intrinsics, however, codegen
support was added/improved:
D58015
D90247
So I think it is safe to now remove this complication from IR.
Note that we still have an IR-level codegen expansion pass for these as discussed
in D95690. Removing that is another step in simplifying the logic. Also note that
x86 was already unconditionally forming reductions in IR, so there should be no
difference for x86.
I spot checked a couple of the tests here by running them through opt+llc and did
not see any asm diffs.
If we do find functional differences for other targets, it should be possible
to (at least temporarily) restore the shuffle IR with the ExpandReductions IR
pass.
Differential Revision: https://reviews.llvm.org/D96552
This reverts commit 502a67dd7f.
This expose a failure in test-suite build on PowerPC,
revert to unblock buildbot first,
Dave will re-commit in https://reviews.llvm.org/D96287.
Thanks Dave.
getIntrinsicInstrCost takes a IntrinsicCostAttributes holding various
parameters of the intrinsic being costed. It can either be called with a
scalar intrinsic (RetTy==Scalar, VF==1), with a vector instruction
(RetTy==Vector, VF==1) or from the vectorizer with a scalar type and
vector width (RetTy==Scalar, VF>1). A RetTy==Vector, VF>1 is considered
an error. Both of the vector modes are expected to be treated the same,
but because this is confusing many backends end up getting it wrong.
Instead of trying work with those two values separately this removes the
VF parameter, widening the RetTy/ArgTys by VF used called from the
vectorizer. This keeps things simpler, but does require some other
modifications to keep things consistent.
Most backends look like this will be an improvement (or were not using
getIntrinsicInstrCost). AMDGPU needed the most changes to keep the code
from c230965ccf working. ARM removed the fix in
dfac521da1, webassembly happens to get a fixup for an SLP cost
issue and both X86 and AArch64 seem to now be using better costs from
the vectorizer.
Differential Revision: https://reviews.llvm.org/D95291
a6f0221276 enabled intersection of FMF on reduction instructions,
so it is safe to ease the check here.
There is still some room to improve here - it looks like we
have nearly duplicate flags propagation logic inside of the
LoopUtils helper but it is limited targets that do not form
reduction intrinsics (they form the shuffle expansion).
As shown in the test diffs, we could miscompile by
propagating flags that did not exist in the original
code.
The flags required for fmin/fmax reductions will be
fixed in a follow-up patch.
After much refactoring over the last 2 weeks to the reduction
matching code, I think this change is finally ready.
We effectively broke fmax/fmin vector reduction optimization
when we started canonicalizing to intrinsics in instcombine,
so this should restore that functionality for SLP.
There are still FMF problems here as noted in the code comments,
but we should be avoiding miscompiles on those for fmax/fmin by
restricting to full 'fast' ops (negative tests are included).
Fixing FMF propagation is a planned follow-up.
Differential Revision: https://reviews.llvm.org/D94913
In the spirit of commit fc783e91e0 (llvm-svn: 248943) we
shouldn't vectorize stores of non-packed types (i.e. types that
has padding between consecutive variables in a scalar layout,
but being packed in a vector layout).
The problem was detected as a miscompile in a downstream test case.
Reviewed By: anton-afanasyev
Differential Revision: https://reviews.llvm.org/D94446
We shouldn't vectorize stores of non-packed types (i.e. types that
has padding between consecutive variables in a scalar layout,
but being packed in a vector layout).
The problem was detected as a miscompile in a downstream test case.
This is a pre-commit of a test case for the fix in D94446.
After merging the shuffles, we cannot rely on the previous shuffle
anymore and need to shrink the final shuffle, if it is required.
Reported in D92668
Differential Revision: https://reviews.llvm.org/D93967
This patch makes SLP and LV emit operations with initial vectors set to poison constant instead of undef.
This is a part of efforts for using poison vector instead of undef to represent "doesn't care" vector.
The goal is to make nice shufflevector optimizations valid that is currently incorrect due to the tricky interaction between undef and poison (see https://bugs.llvm.org/show_bug.cgi?id=44185 ).
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D94061
Div/rem by zero is immediate undefined behavior and anything goes.
Currently we fold it to undef, this patch changes it to fold to
poison instead, which is slightly stronger.
Differential Revision: https://reviews.llvm.org/D93995
As mentioned in D93793, there are quite a few places where unary `IRBuilder::CreateShuffleVector(X, Mask)` can be used
instead of `IRBuilder::CreateShuffleVector(X, Undef, Mask)`.
Let's update them.
Actually, it would have been more natural if the patches were made in this order:
(1) let them use unary CreateShuffleVector first
(2) update IRBuilder::CreateShuffleVector to use poison as a placeholder value (D93793)
The order is swapped, but in terms of correctness it is still fine.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93923
This patch updates IRBuilder to create insertelement/shufflevector using poison as a placeholder.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93793
Currently undef is used as a don’t-care vector when constructing a vector using a series of insertelement.
However, this is problematic because undef isn’t undefined enough.
Especially, a sequence of insertelement can be optimized to shufflevector, but using undef as its placeholder makes shufflevector a poison-blocking instruction because undef cannot be optimized to poison.
This makes a few straightforward optimizations incorrect, such as:
```
; https://bugs.llvm.org/show_bug.cgi?id=44185
define <4 x float> @insert_not_undef_shuffle_translate_commute(float %x, <4 x float> %y, <4 x float> %q) {
%xv = insertelement <4 x float> %q, float %x, i32 2
%r = shufflevector <4 x float> %y, <4 x float> %xv, <4 x i32> { 0, 6, 2, undef }
ret <4 x float> %r ; %r[3] is undef
}
=>
define <4 x float> @insert_not_undef_shuffle_translate_commute(float %x, <4 x float> %y, <4 x float> %q) {
%r = insertelement <4 x float> %y, float %x, i32 1
ret <4 x float> %r ; %r[3] = %y[3], incorrect if %y[3] = poison
}
Transformation doesn't verify!
ERROR: Target is more poisonous than source
```
I’d like to suggest
1. Using poison as insertelement’s placeholder value (IRBuilder::CreateVectorSplat should be patched too)
2. Updating shufflevector’s semantics to return poison element if mask is undef
Note that poison is currently lowered into UNDEF in SelDag, so codegen part is okay.
m_Undef() matches PoisonValue as well, so existing optimizations will still fire.
The only concern is hidden miscompilations that will go incorrect when poison constant is given.
A conservative way is copying all tests having `insertelement undef` & replacing it with `insertelement poison` & run Alive2 on it, but it will create many tests and people won’t like it. :(
Instead, I’ll simply locally maintain the tests and run Alive2.
If there is any bug found, I’ll report it.
Relevant links: https://bugs.llvm.org/show_bug.cgi?id=43958 , http://lists.llvm.org/pipermail/llvm-dev/2019-November/137242.html
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93586
Sanjay Patel