While working on D97208 I noticed that these greedy regular
expressions prevent tests from failing when (%rip) appears after
a constant pool label when it didn't before.
Reviewed By: RKSimon, pengfei
Differential Revision: https://reviews.llvm.org/D99460
RVV intrinsics has new overloading rule, please see
82aac7dad4
Changed:
1. Rename `generic` to `overloaded` because the new rule is not using C11 generic.
2. Change HasGeneric to HasNoMaskedOverloaded because all masked operations
support overloading api.
3. Add more overloaded tests due to overloading rule changed.
Differential Revision: https://reviews.llvm.org/D99189
For example,
<https://lab.llvm.org/buildbot/#/builders/132/builds/3929>
has this diagnostic:
```
/opt/gcc/9.3.0/snos/include/g++/bits/stl_tree.h:780:8: error: static assertion failed: comparison object must be invocable as const
780 | is_invocable_v<const _Compare&, const _Key&, const _Key&>,
| ^~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
```
In input dump annotations, `check:2'1` indicates diagnostic 1 for the
`CHECK` directive on check file line 2. Without this patch,
`-dump-input` computes the diagnostic index with the assumption that
FileCheck *consecutively* produces all diagnostics for the same
pattern. Already, that can be a false assumption, as in the examples
below. Moreover, it seems like a brittle assumption as FileCheck
evolves. Finally, it actually complicates the implementation even if
it makes it slightly more efficient.
This patch avoids that assumption. Examples below show results after
applying this patch. Before applying this patch, `'N` is omitted
throughout these examples because the implementation doesn't notice
there's more than one diagnostic per pattern.
First, `CHECK-LABEL` violates the assumption because `CHECK-LABEL`
tries to match twice, and other directives can match in between:
```
$ cat check
CHECK: foobar
CHECK-LABEL: foobar
$ FileCheck -vv check < input |& tail -8
<<<<<<
1: text
2: foobar
label:2'0 ^~~~~~
check:1 ^~~~~~
label:2'1 X error: no match found
3: text
>>>>>>
```
Second, `--implicit-check-not` is obviously processed many times among
other directives:
```
$ cat check
CHECK: foo
CHECK: foo
$ FileCheck -vv -dump-input=always -implicit-check-not=foo \
check < input |& tail -16
<<<<<<
1: text
not:imp1'0 X~~~~
2: foo
check:1 ^~~
not:imp1'1 X
3: text
not:imp1'1 ~~~~~
4: foo
check:2 ^~~
not:imp1'2 X
5: text
not:imp1'2 ~~~~~
6:
eof:2 ^
>>>>>>
```
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D97813
IR values convert to check prefix FileCheck variables for IR checks. For example, nameless values, e.g., %0, convert to check prefix TMP FileCheck variables, e.g., [[TMP0:%.*]]. This check prefix may clash with named values that have the same name and that causes auto-generated tests to fail. Currently a warning is emitted to change the names of the IR values but this is not always possible, if for example they are generated by clang. Manual intervention to fix the FileCheck variable names is too tedious. This patch add a parameter to prefix conflicting FileCheck variable names with a user-provided string to automate the process.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D99415
In future patches I will be setting the IsText parameter frequently so I will refactor the args to be in the following order. I have removed the FileSize parameter because it is never used.
```
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFile(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true, bool IsVolatile = false);
static ErrorOr<std::unique_ptr<MemoryBuffer>>
getFileOrSTDIN(const Twine &Filename, bool IsText = false,
bool RequiresNullTerminator = true);
static ErrorOr<std::unique_ptr<MB>>
getFileAux(const Twine &Filename, uint64_t MapSize, uint64_t Offset,
bool IsText, bool RequiresNullTerminator, bool IsVolatile);
static ErrorOr<std::unique_ptr<WritableMemoryBuffer>>
getFile(const Twine &Filename, bool IsVolatile = false);
```
Reviewed By: jhenderson
Differential Revision: https://reviews.llvm.org/D99182
This patch addresses the removal of register size information done in
commit c8b782c.
Without this change, there is no viable option to get register size
information outside libTarget. We need this information to run
analysis that know the register size from the MC layer, used by
BOLT.
Discussion D50285 and D47199.
Reviewed By: kparzysz
Differential Revision: https://reviews.llvm.org/D97891
Follow up from D92955 and D83636. This patch makes the base cpp files
OMP.cpp and ACC.cpp normal files and they now include the XXX.inc file
generated by tablegen. This reduces the number of file generated by the
DirectiveEmitter backend and makes it closer to the proposal in D83636.
Reviewed By: Meinersbur
Differential Revision: https://reviews.llvm.org/D93560
Quality of progress bar and ETA in lit has always bothered me.
For example, given `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 1%, it says it will take 10 more minutes,
at 25%, it says it will take 1.25 more minutes,
at 50%, it says it will take 30 more seconds,
and in the end finishes with `Testing Time: 39.49s`. That's rather wildly unprecise.
Currently, it assumes that every single test will take the same amount of time to run on average.
This is is a somewhat reasonable approximation overall, but it is quite clearly imprecise,
especially in the beginning.
But, we can do better now, after D98179! We now know how long the tests took to run last time.
So we can build a better ETA predictor, by accumulating the time spent already,
the time that will be spent on the tests for which we know the previous time,
and for the test for which we don't have previous time, again use the average time
over the tests for which we know current or previous run time.
It would be better to use median, but i'm wary of the cost that may incur.
Now, on **first** run of `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 10%, it says it will take 30 seconds,
at 25%, it says it will take 50 more seconds,
at 50%, it says it will take 27 more seconds,
and in the end finishes with `Testing Time: 41.64s`. That's pretty reasonable.
And on second run of `./bin/llvm-lit /repositories/llvm-project/clang/test/CodeGen* -sv`
at 1%, it says it will take 1 minutes,
at 25%, it says it will take 30 more seconds,
at 50%, it says it will take 19 more seconds,
and in the end finishes with `Testing Time: 39.49s`. That's amazing i think!
I think people will love this :)
Reviewed By: yln
Differential Revision: https://reviews.llvm.org/D99073
Lookup tables generate non PIC-friendly code, which requires dynamic relocation as described in:
https://bugs.llvm.org/show_bug.cgi?id=45244
This patch adds a new pass that converts lookup tables to relative lookup tables to make them PIC-friendly.
Differential Revision: https://reviews.llvm.org/D94355
Even though we have read the times before,
we intentionally forget about it for performance reasons.
But that means we also forget all the times for the tests
that weren't executed this time. This is mildly inconvenient.
So, when recording the new times, first re-read the old times,
and update times for the tests that were executed,
thus preserving all original times, too.
I.e. when you first run lit on a directory, and then on a single test,
the timing knowledge about anything else other than that single test
is lost. This isn't right.
All of these depend on the order of tests, so if one runs them twice,
the tests within them will naturally be reordered
using the previous run times, which breaks them.
If lit was run on a directory that contained no suites,
then naturally suite[0] will not be there,
and that line would cause python warnings.
So just predicate it with a check that it is there in the first place.
Pass no longer handles skips. Pass now removes unnecessary
unconditional branches and lowers early termination branches.
Hence rename to SILateBranchLowering.
Move code to handle returns to epilog from SIPreEmitPeephole
into SILateBranchLowering. This means SIPreEmitPeephole only
contains optional optimisations, and all required transforms
are in SILateBranchLowering.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D98915
SIRemoveShortExecBranches is an optimisation so fits well in the
context of SIPreEmitPeephole.
Test changes relate to early termination from kills which have now
been lowered prior to considering branches for removal.
As these use s_cbranch the execz skips are now retained instead.
Currently either behaviour is valid as kill with EXEC=0 is a nop;
however, if early termination is used differently in future then
the new behaviour is the correct one.
Reviewed By: foad
Differential Revision: https://reviews.llvm.org/D98917
- D96404 defaulted to libunwind which isn't provided by NDK r21
(or r22), so specify -rtlib=libgcc on non-arm32.
- D97993 means that we need to use --gcc-toolchain instead of -B
to let the driver find libgcc.
This patch consists of the initial changes to help distinguish between text and binary content correctly on z/OS. I would like to get feedback from Windows users on setting OF_None for all ToolOutputFiles. This seems to have been done as an optimization to prevent CRLF translation on Windows in the past.
Reviewed By: zibi
Differential Revision: https://reviews.llvm.org/D97785
This reverts commit d09adfd399.
That commit caused failures in
clang-tidy/infrastructure/validate-check-names.cpp on windows
buildbots.
That change exposed a surprising issue, not directly related to
this change in itself, but in how TestRunner quotes command line
arguments that later are going to be interpreted by a msys based
tool (like grep.exe, when provided by Git for Windows). This
worked accidentally before, when grep was invoked via not.exe
which took a more conservative approach to windows argument quoting.
When running in a Windows Container, the Git for Windows Unix tools
(C:\Program Files\Git\usr\bin) just hang if this variable isn't
passed through.
Currently, running the LLVM/clang tests in a Windows Container fails
if that directory is added to the path, but succeeds after this change.
(After this change, the previously used GnuWin tools can be left out
entirely, too, as lit automatically picks up the Git for Windows tools
if necessary.)
Differential Revision: https://reviews.llvm.org/D98858
Keep running "not --crash" via the external "not" executable, but
for plain negations, and for cases that use the shell "!" operator,
just skip that argument and invert the return code.
The libcxx tests only use the shell operator "!" for negations,
never the "not" executable, because libcxx tests can be run without
having a fully built llvm tree available providing the "not"
executable.
This allows using the internal shell for libcxx tests.
Differential Revision: https://reviews.llvm.org/D98859
A more general name might be match-time error propagation. That is,
it's conceivable we'll one day have non-numeric errors that require
the handling fixed by this patch.
Without this patch, FileCheck behaves as follows:
```
$ cat check
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
$ FileCheck -vv -dump-input=never check < input
check:1:54: remark: implicit EOF: expected string found in input
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
^
<stdin>:2:1: note: found here
^
check:1:15: error: unable to substitute variable or numeric expression: overflow error
CHECK-NOT: [[#0x8000000000000000+0x8000000000000000]]
^
$ echo $?
0
```
Notice that the exit status is 0 even though there's an error.
Moreover, FileCheck doesn't print the error diagnostic unless both
`-dump-input=never` and `-vv` are specified.
The same problem occurs when `CHECK-NOT` does have a match but a
capture fails due to overflow: exit status is 0, and no diagnostic is
printed unless both `-dump-input=never` and `-vv` are specified. The
usefulness of capturing from `CHECK-NOT` is questionable, but this
case should certainly produce an error.
With this patch, FileCheck always includes the error diagnostic and
has non-zero exit status for the above examples. It's conceivable
that this change will cause some existing tests to fail, but my
assumption is that they should fail. Moreover, with nearly every
project enabled, this patch didn't produce additional `check-all`
failures for me.
This patch also extends input dumps to include such numeric error
diagnostics for both expected and excluded patterns.
As noted in fixmes in some of the tests added by this patch, this
patch worsens an existing issue with redundant diagnostics. I'll fix
that bug in a subsequent patch.
Reviewed By: thopre, jhenderson
Differential Revision: https://reviews.llvm.org/D98086
The "path" recorded for timing purposes is only used as a key into a dictionary. It is never used as an actual path to a filesystem API, therefore we should use '/' as the canonical separator so that Unix and Windows machines can share timing data. This also ensures that the lit testing works across platforms.
Reviewed By: jhenderson, jmorse
Differential Revision: https://reviews.llvm.org/D98767
LLVM GN Syncbot