This updates all the non-runtime project release notes to use the
version number from CMake instead of the hard-coded version numbers
in conf.py.
It also hides warnings about pre-releases when the git suffix
is dropped from the LLVM version in CMake.
Reviewed By: MaskRay
Differential Revision: https://reviews.llvm.org/D112181
This patch introduces a linker wrapper tool that allows us to preprocess
files before they are sent to the linker. This adds a dummy action and
job to the driver stage that builds the linker command as usual and then
replaces the command line with the wrapper tool.
Depends on D116543
Reviewed By: JonChesterfield
Differential Revision: https://reviews.llvm.org/D116544
As raised here: https://lists.llvm.org/pipermail/llvm-dev/2021-November/153881.html
Now that VS2022 is on general release, LLVM is expected to build on VS2017, VS2019 and VS2022, which is proving hazardous to maintain due to changes in behaviour including preprocessor and constexpr changes. Plus of the few developers that work with VS, many have already moved to VS2019/22.
This patch proposes to raise the minimum supported version to VS2019 (16.x) - I've made the hard limit 16.0 or later, with the soft limit VS2019 16.7 - older versions of VS2019 are "allowed" (at your own risk) via the LLVM_FORCE_USE_OLD_TOOLCHAIN cmake flag.
Differential Revision: https://reviews.llvm.org/D114639
to give users a final warning that they need to migrate away. They could still
use -flegacy-pass-manager for Clang 14.0.0, but the functionality may not work
for 15.0.0.
-fexperimental-new-pass-manager is a no-op for default builds, so not urgent to
be removed for 14.0.0.
clang/test/Frontend/optimization-remark-with-hotness.c is removed because its
new PM replacement optimization-remark-with-hotness-new-pm.c exists.
Reviewed By: aeubanks, nikic
Differential Revision: https://reviews.llvm.org/D118313
Part of the _BitInt feature in C2x
(http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2763.pdf) is a new
macro in limits.h named BITINT_MAXWIDTH that can be used to determine
the maximum width of a bit-precise integer type. This macro must expand
to a value that is at least as large as ULLONG_WIDTH.
This adds an implementation-defined macro named __BITINT_MAXWIDTH__ to
specify that value, which is used by limits.h for the standard macro.
This also limits the maximum bit width to 128 bits because backends do
not currently support all mathematical operations (such as division) on
wider types yet. This maximum is expected to be increased in the future.
This matches GCC: https://godbolt.org/z/sM5q95PGY
I realize this is an API break for clang+clang - so I'm totally open to
discussing how we should deal with that. If Apple wants to keep the
Clang layout indefinitely, if we want to put a flag on this so non-Apple
folks can opt out of this fix/new behavior.
Differential Revision: https://reviews.llvm.org/D117616
We have an page dedicated to compliation databases including
various ways to generate them, but we don't mention that clang
has a built in method to do this. This addresses that.
Reviewed By: joerg
Differential Revision: https://reviews.llvm.org/D116882
With 118f966b46, Clang matches GCC's behaviour and allows enabling
-Wdeclaration-after-statement with C99 and later.
However, the check for mixing declarations and code is not a constant time
algorithm, and therefore should be guarded with Diags.isIgnored().
Furthermore, improve test coverage with: non-pedantic C89 with the
warning; C11 with the warning; and when using -Wall.
Finally, mention the changed behaviour in ReleaseNotes.rst.
Reviewed By: aaron.ballman
Differential Revision: https://reviews.llvm.org/D117232
This patch adds support for the MSVC /HOTPATCH flag: https://docs.microsoft.com/sv-se/cpp/build/reference/hotpatch-create-hotpatchable-image?view=msvc-170&viewFallbackFrom=vs-2019
The flag is translated to a new -fms-hotpatch flag, which in turn adds a 'patchable-function' attribute for each function in the TU. This is then picked up by the PatchableFunction pass which would generate a TargetOpcode::PATCHABLE_OP of minsize = 2 (which means the target instruction must resolve to at least two bytes). TargetOpcode::PATCHABLE_OP is only implemented for x86/x64. When targetting ARM/ARM64, /HOTPATCH isn't required (instructions are always 2/4 bytes and suitable for hotpatching).
Additionally, when using /Z7, we generate a 'hot patchable' flag in the CodeView debug stream, in the S_COMPILE3 record. This flag is then picked up by LLD (or link.exe) and is used in conjunction with the linker /FUNCTIONPADMIN flag to generate extra space before each function, to accommodate for live patching long jumps. Please see: d703b92296/lld/COFF/Writer.cpp (L1298)
The outcome is that we can finally use Live++ or Recode along with clang-cl.
NOTE: It seems that MSVC cl.exe always enables /HOTPATCH on x64 by default, although if we did the same I thought we might generate sub-optimal code (if this flag was active by default). Additionally, MSVC always generates a .debug$S section and a S_COMPILE3 record, which Clang doesn't do without /Z7. Therefore, the following MSVC command-line "cl /c file.cpp" would have to be written with Clang such as "clang-cl /c file.cpp /HOTPATCH /Z7" in order to obtain the same result.
Depends on D43002, D80833 and D81301 for the full feature.
Differential Revision: https://reviews.llvm.org/D116511
C17 deprecated ATOMIC_VAR_INIT with the resolution of DR 485. C++
followed suit when adopting P0883R2 for C++20, but additionally chose
to deprecate ATOMIC_FLAG_INIT at the same time despite the macro still
being required in C. This patch marks both macros as deprecated when
appropriate to do so.
This style is similar to AlwaysBreak, but places closing brackets on new lines.
For example, if you have a multiline parameter list, clang-format currently only supports breaking per-parameter, but places the closing bracket on the line of the last parameter.
Function(
param1,
param2,
param3);
A style supported by other code styling tools (e.g. rustfmt) is to allow the closing brackets to be placed on their own line, aiding the user in being able to quickly infer the bounds of the block of code.
Function(
param1,
param2,
param3
);
For prior work on a similar feature, see: https://reviews.llvm.org/D33029.
Note: This currently only supports block indentation for closing parentheses.
Differential Revision: https://reviews.llvm.org/D109557
This completes the implementation of
WG14 N2412 (http://www.open-std.org/jtc1/sc22/wg14/www/docs/n2412.pdf),
which standardizes C on a twos complement representation for integer
types. The only work that remained there was to define the correct
macros in the standard headers, which this patch does.
I noticed that the following case would compile in Clang but not GCC:
void *x(void) {
void *p = &&foo;
asm goto ("# %0\n\t# %l1":"+r"(p):::foo);
foo:;
return p;
}
Changing the output template above from %l2 would compile in GCC but not
Clang.
This demonstrates that when using tied outputs (say via the "+r" output
constraint), the hidden inputs occur or are numbered BEFORE the labels,
at least with GCC.
In fact, GCC does denote this in its documentation:
https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/Extended-Asm.html#Goto-Labels
> Output operand with constraint modifier ‘+’ is counted as two operands
> because it is considered as one output and one input operand.
For the sake of compatibility, I think it's worthwhile to just make this
change.
It's better to use symbolic names for compatibility (especially now
between released version of Clang that support asm goto with outputs).
ie. %l1 from the above would be %l[foo]. The GCC docs also make this
recommendation.
Also, I cleaned up some cruft in GCCAsmStmt::getNamedOperand. AFAICT,
NumPlusOperands was no longer used, though I couldn't find which commit
didn't clean that up correctly.
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=98096
Link: https://gcc.gnu.org/bugzilla/show_bug.cgi?id=103640
Link: https://gcc.gnu.org/onlinedocs/gcc-11.2.0/gcc/Extended-Asm.html#Goto-Labels
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D115471
Add support of linking files compiled into SPIR-V objects
using spirv-link.
Command line inteface examples:
clang --target=spirv64 test1.cl test2.cl
clang --target=spirv64 test1.cl -o test1.o
clang --target=spirv64 test1.o test2.cl -o test_app.out
This works independently from the SPIR-V generation method
(via an external tool or an internal backend) and applies
to either approach that is being used.
Differential Revision: https://reviews.llvm.org/D116266
When passing a set of flags to configure defaults for a specific
target (similar to the cmake settings `CLANG_DEFAULT_RTLIB`,
`CLANG_DEFAULT_UNWINDLIB`, `CLANG_DEFAULT_CXX_STDLIB` and
`CLANG_DEFAULT_LINKER`, but without hardcoding them in the binary),
some of the flags may cause warnings (e.g. `-stdlib=` when compiling C
code). Allow requesting selectively ignoring unused arguments among
some of the arguments on the command line, without needing to resort
to `-Qunused-arguments` or `-Wno-unused-command-line-argument`.
Fix up the existing diagnostics.c testcase. It was added in
response to PR12181 to fix handling of
`-Werror=unused-command-line-argument`, but the command line option
in the test (`-fzyzzybalubah`) now triggers "error: unknown argument"
instead of the intended warning. Change it into a linker input
(`-lfoo`) which triggers the intended diagnostic. Extend the
existing test case to check more cases and make sure that it keeps
testing the intended case.
Add testing of the new option to this existing test.
Differential Revision: https://reviews.llvm.org/D116503
Previously this was documented as having the behavior of the
"target's native float-to-int conversion". After D115804, clang
uses saturating FP cast intrinsics which have the same behavior
on all targets.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D116856
Although we moved to Github Issues. The bug report message refers to
Bugzilla still. This patch tries to update these URLs.
Reviewed By: MaskRay, Quuxplusone, jhenderson, libunwind, libc++
Differential Revision: https://reviews.llvm.org/D116351
This change adds an option AfterOverloadedOperator in SpaceBeforeParensOptions to add a space between overloaded operator and opening parentheses in clang-format.
Reviewed By: MyDeveloperDay, curdeius, HazardyKnusperkeks
Differential Revision: https://reviews.llvm.org/D116283
Along with the new language mode this commit contains misc
small updates for OpenCL 3 and GitHub issues for OpenCL.
Differential Revision: https://reviews.llvm.org/D116271
This commit resolves GitHub issue #45895 (Bugzilla #46550), to
add or remove empty line between definition blocks including
namespaces, classes, structs, enums and functions.
Reviewed By: MyDeveloperDay, curdeius, HazardyKnusperkeks
Differential Revision: https://reviews.llvm.org/D116314
My team has a vendetta against lines ending with an open parenthesis, thought it might be useful for others too 😊
Reviewed By: HazardyKnusperkeks, curdeius
Differential Revision: https://reviews.llvm.org/D116170
A 1% increase in the number of clang-formatted files.
An additional 235 files have been added to LLVM, and an additional
268 files are now clang-format clean. Raising the overall % to 52%
There are now 8407 files clean out of 15902 (ignoring lit tests)
This diff extends the -style=file option to allow a config file to be specified explicitly. This is useful (for instance) when adding IDE commands to reformat code to a personal style.
Usage: `clang-format -style=file:<path/to/config/file> ...`
Reviewed By: HazardyKnusperkeks, curdeius, MyDeveloperDay, zwliew
Differential Revision: https://reviews.llvm.org/D72326
Extends response file expansion to recognize `<CFGDIR>` and expand to the
current file's directory. This makes it much easier to author clang config
files rooted in portable, potentially not-installed SDK directories.
A typical use case may be something like the following:
```
# sample_sdk.cfg
--target=sample
-isystem <CFGDIR>/include
-L <CFGDIR>/lib
-T <CFGDIR>/ldscripts/link.ld
```
Reviewed By: sepavloff
Differential Revision: https://reviews.llvm.org/D115604
This patch adds a toolchain (TC) for SPIR-V along with the
following changes in Driver and base ToolChain and Tool.
This is required to provide a mechanism in clang to bypass
SPIR-V backend in LLVM for SPIR-V until it lands in LLVM and
matures.
The SPIR-V code is generated by the SPIRV-LLVM translator tool
named 'llvm-spirv' that is sought in 'PATH'.
The compilation phases/actions should be bound for SPIR-V in
the meantime as following:
compile -> tools::Clang
backend -> tools::SPIRV::Translator
assemble -> tools::SPIRV::Translator
However, Driver’s ToolSelector collapses compile-backend-assemble
and compile-backend sequences to tools::Clang. To prevent this,
added new {use,has}IntegratedBackend properties in ToolChain and
Tool to which the ToolSelector reacts on, and which SPIR-V TC
overrides.
Linking of multiple input files is currently not supported but
can be added separately.
Differential Revision: https://reviews.llvm.org/D112410
Co-authored-by: Henry Linjamäki <henry.linjamaki@parmance.com>
Sylvestre Ledru