This adds an option --show-tags to "memory read".
(lldb) memory read mte_buf mte_buf+32 -f "x" -s8 --show-tags
0x900fffff7ff8000: 0x0000000000000000 0x0000000000000000 (tag: 0x0)
0x900fffff7ff8010: 0x0000000000000000 0x0000000000000000 (tag: 0x1)
Tags are printed on the end of each line, if that
line has any tags associated with it. Meaning that
untagged memory output is unchanged.
Tags are printed based on the granule(s) of memory that
a line covers. So you may have lines with 1 tag, with many
tags, no tags or partially tagged lines.
In the case of partially tagged lines, untagged granules
will show "<no tag>" so that the ordering is obvious.
For example, a line that covers 2 granules where the first
is not tagged:
(lldb) memory read mte_buf-16 mte_buf+16 -l32 -f"x" --show-tags
0x900fffff7ff7ff0: 0x00000000 <...> (tags: <no tag> 0x0)
Untagged lines will just not have the "(tags: ..." at all.
Though they may be part of a larger output that does have
some tagged lines.
To do this I've extended DumpDataExtractor to also print
memory tags where it has a valid execution context and
is asked to print them.
There are no special alignment requirements, simply
use "memory read" as usual. All alignment is handled
in DumpDataExtractor.
We use MakeTaggedRanges to find all the tagged memory
in the current dump, then read all that into a MemoryTagMap.
The tag map is populated once in DumpDataExtractor and re-used
for each subsequently printed line (or recursive call of
DumpDataExtractor, which some formats do).
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D107140
This removes the non-address bits before we try to use
the addresses.
Meaning that when results are shown, those results won't
show non-address bits either. This follows what "memory read"
has done. On the grounds that non-address bits are a property
of a pointer, not the memory pointed to.
I've added testing and merged the find and read tests into one
file.
Note that there are no API side changes because "memory find"
does not have an equivalent API call.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D117299
Allow users to create aliases for aliases to raw input commands. That probably
sounds convoluted, so here's an example:
```
command alias some-setup env SOMEVAR=SOMEVALUE
```
This an alias based on `env`, which itself is an alias for `_regex-env`.
`_regex-env` is a `command regex` command, which takes raw input.
The above `some-setup` alias fails with:
```
error: Unable to create requested alias.
```
This change allows such aliases to be created. lldb already supports aliases to
aliases for parsed commands.
Differential Revision: https://reviews.llvm.org/D117259
Although the memory tag commands use a memory tag manager to handle
addresses, that only removes the top byte.
That top byte is 4 bits of memory tag and 4 free bits, which is more
than it should strictly remove but that's how it is for now.
There are other non-address bit uses like pointer authentication.
To ensure the memory tag manager only has to deal with memory tags,
use the ABI plugin to remove the rest.
The tag access test has been updated to sign all the relevant pointers
and require that we're running on a system with pointer authentication
in addition to memory tagging.
The pointers will look like:
<4 bit user tag><4 bit memory tag><signature><bit virtual address>
Note that there is currently no API for reading memory tags. It will
also have to consider this when it arrives.
Reviewed By: omjavaid
Differential Revision: https://reviews.llvm.org/D117672
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
Recommitting after D116901 and D116863.
(cherry picked from commit 2c7d10c412)
Addresses on AArch64 can have top byte tags, memory tags and pointer
authentication signatures in the upper bits.
While testing memory tagging I found that memory read couldn't
read a range if the two addresses had different tags. The same
could apply to signed pointers given the right circumstance.
(lldb) memory read mte_buf_alt_tag mte_buf+16
error: end address (0x900fffff7ff8010) must be greater than the start
address (0xa00fffff7ff8000).
Or it would try to read a lot more memory than expected.
(lldb) memory read mte_buf mte_buf_alt_tag+16
error: Normally, 'memory read' will not read over 1024 bytes of data.
error: Please use --force to override this restriction just once.
error: or set target.max-memory-read-size if you will often need a
larger limit.
Fix this by removing non address bits before we calculate the read
range. A test is added for AArch64 Linux that confirms this by using
the top byte ignore feature.
This means that if you do read with a tagged pointer the output
does not include those tags. This is potentially confusing but I think
overall it's better that we don't pretend that we're reading memory
from a range that the process is unable to map.
(lldb) p ptr1
(char *) $4 = 0x3400fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) p ptr2
(char *) $5 = 0x5600fffffffff140 "\x80\xf1\xff\xff\xff\xff"
(lldb) memory read ptr1 ptr2+16
0xfffffffff140: 80 f1 ff ff ff ff 00 00 38 70 bc f7 ff ff 00 00 ........8p......
Reviewed By: omjavaid, danielkiss
Differential Revision: https://reviews.llvm.org/D103626
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
(cherry picked from commit 2c7d10c412)
Ensure that errors in `frame variable` are reflected in result object.
The statistics for `frame variable` show invocations as being successful, even
when executing one of the error paths.
This change replaces `result.GetErrorStream()` with `result.AppendError()`,
which also sets the status to `eReturnStatusFailed`.
Differential Revision: https://reviews.llvm.org/D116788
The current help for `frame variable` is somewhat long. Its length, combined
with the few aliases (`var`, `v`, and `vo`) can make the output of `apropos`
redundant and noisy.
This separates out the details into a separate long help.
Differential Revision: https://reviews.llvm.org/D116708
When we switched options over to use the Options.td file, a bug was introduced that caused the "-g" option for "settings set" to require a filename arguemnt. This patch fixes this issue and adds a test so this doesn't regress.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D116012
Because of its dependency on clang (and potentially other compilers
downstream, such as swift) lldb_private::GetVersion already lives in its
own library called lldbBase. Despite that, its implementation was spread
across unrelated files. This patch improves things by introducing a
Version library with its own directory, header and implementation file.
The benefits of this patch include:
- We can get rid of the ugly quoting macros.
- Other parts of LLDB can read the version number from
lldb/Version/Version.inc.
- The implementation can be swapped out for tools like lldb-server than
don't need to depend on clang at all.
Differential revision: https://reviews.llvm.org/D115211
Also add tests to check that we print the warning in the right
circumstances.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D114877
Certain commands like 'memory write', 'register read' etc all use
the OptionGroupFormat options but the help usage text for those
options is not customized to those commands.
One such example is:
(lldb) help memory read
-s <byte-size> ( --size <byte-size> )
The size in bytes to use when displaying with the selected format.
(lldb) help memory write
-s <byte-size> ( --size <byte-size> )
The size in bytes to use when displaying with the selected format.
This patch allows such commands to overwrite the help text for the options
in the OptionGroupFormat group as needed and fixes help text of memory write.
llvm.org/pr49018.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D114448
Currently the 'memory write' command allows specifying the values when
writing the file contents to memory but the values are actually ignored. This
patch fixes that by erroring out when values are specified in such cases.
Reviewed By: DavidSpickett
Differential Revision: https://reviews.llvm.org/D114544
The reworking of the gdb client tests into the PlatformClientTestBase broke
the test for this. I did the mutatis mutandis for the move, but the test
still fails. Reverting till I have time to figure out why.
This reverts commit b715b79d54.
We don't actually need a local copy of the main executable to debug
a remote process. So instead of treating "no local module" as an error,
see if the LaunchInfo has an executable it wants lldb to use, and if so
use it. Then report whatever error the remote server returns.
Differential Revision: https://reviews.llvm.org/D113521
[NFC] As part of using inclusive language within the llvm project, this patch
renames master plan to controlling plan in lldb.
Reviewed By: jingham
Differential Revision: https://reviews.llvm.org/D113019
The amount of roundtrips between StringRefs, ConstStrings and std::strings is
getting a bit out of hand, this patch avoid the unnecessary roundtrips.
Reviewed By: wallace, aprantl
Differential Revision: https://reviews.llvm.org/D112863
The new module stats adds the ability to measure the time it takes to parse and index the symbol tables for each module, and reports modules statistics in the output of "statistics dump" along with the path, UUID and triple of the module. The time it takes to parse and index the symbol tables are also aggregated into new top level key/value pairs at the target level.
Differential Revision: https://reviews.llvm.org/D112279
This patch is a smaller version of a previous patch https://reviews.llvm.org/D110804.
This patch modifies the output of "statistics dump" to be able to get stats from the current target. It adds 3 new stats as well. The output of "statistics dump" is now emitted as JSON so that it can be used to track performance and statistics and the output could be used to populate a database that tracks performance. Sample output looks like:
(lldb) statistics dump
{
"expressionEvaluation": {
"failures": 0,
"successes": 0
},
"firstStopTime": 0.34164492800000001,
"frameVariable": {
"failures": 0,
"successes": 0
},
"launchOrAttachTime": 0.31969605400000001,
"targetCreateTime": 0.0040863039999999998
}
The top level keys are:
"expressionEvaluation" which replaces the previous stats that were emitted as plain text. This dictionary contains the success and fail counts.
"frameVariable" which replaces the previous stats for "frame variable" that were emitted as plain text. This dictionary contains the success and fail counts.
"targetCreateTime" contains the number of seconds it took to create the target and load dependent libraries (if they were enabled) and also will contain symbol preloading times if that setting is enabled.
"launchOrAttachTime" is the time it takes from when the launch/attach is initiated to when the first private stop occurs.
"firstStopTime" is the time in seconds that it takes to stop at the first stop that is presented to the user via the LLDB interface. This value will only have meaning if you set a known breakpoint or stop location in your code that you want to measure as a performance test.
This diff is also meant as a place to discuess what we want out of the "statistics dump" command before adding more funcionality. It is also meant to clean up the previous code that was storting statistics in a vector of numbers within the lldb_private::Target class.
Differential Revision: https://reviews.llvm.org/D111686
Based on post-commit review discussion on
2bd8493847 with Richard Smith.
Other uses of forcing HasEmptyPlaceHolder to false seem OK to me -
they're all around pointer/reference types where the pointer/reference
token will appear at the rightmost side of the left side of the type
name, so they make nested types (eg: the "int" in "int *") behave as
though there is a non-empty placeholder (because the "*" is essentially
the placeholder as far as the "int" is concerned).
This was originally committed in 277623f4d5
Reverted in f9ad1d1c77 due to breakages
outside of clang - lldb seems to have some strange/strong dependence on
"char [N]" versus "char[N]" when printing strings (not due to that name
appearing in DWARF, but probably due to using clang to stringify type
names) that'll need to be addressed, plus a few other odds and ends in
other subprojects (clang-tools-extra, compiler-rt, etc).
This patch deals with ObjectFile, ObjectContainer and OperatingSystem
plugins. I'll convert the other types in separate patches.
In order to enable piecemeal conversion, I am leaving some ConstStrings
in the lowest PluginManager layers. I'll convert those as the last step.
Differential Revision: https://reviews.llvm.org/D112061
When you invoke "help type filter" the resulting help shows:
Syntax: type synthetic [<sub-command-options>]
This patch fixes the help so it says "type filter" instead of "type synthetic".
patch by: "Daniel Jalkut <jalkut@red-sweater.com>"
Reviewed By: teemperor
Differential Revision: https://reviews.llvm.org/D112199
This adds the `target dump typesystem'`command which dumps the TypeSystem of the
target itself (aka the 'scratch TypeSystem'). This is similar to `target modules
dump ast` which dumps the AST of lldb::Modules associated with a selected
target.
Unlike `target modules dump ast`, the new command is not a subcommand of `target
modules dump` as it's not touching the modules of a target at all. Also unlike
`target modules dump ast` I tried to keep the implementation language-neutral,
so this patch moves our Clang `Dump` to the `TypeSystem` interface so it will
also dump the state of any future/downstream scratch TypeSystems (e.g., Swift).
That's also why the command just refers to a 'typesystem' instead of an 'ast'
(which is only how Clang is necessarily modelling the internal TypeSystem
state).
The main motivation for this patch is that I need to write some tests that check
for duplicates in the ScratchTypeSystemClang of a target. There is currently no
way to check for this at the moment (beside measuring memory consumption of
course). It's probably also useful for debugging LLDB itself.
Reviewed By: labath
Differential Revision: https://reviews.llvm.org/D111936
The point is to allow users with a related set of script based commands
to organize their commands in a hierarchy in the command set, rather than
having to have only top-level commands.
Differential Revision: https://reviews.llvm.org/D110298
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
Previously it was not clear what arguments this required, or what it would do if you didn't pass the destination argument.
Differential Revision: https://reviews.llvm.org/D110981
The issue here was that we were not updating the interpreter's
execution context when calling HandleCommand to continue the process.
Since we had just created the process, it wasn't in the interpreter's
execution context so HandleCommand failed at CheckRequirements. The
patch fixes that by passing the process execution context directly
to HandleCommand.
Differential Revision: https://reviews.llvm.org/D110787
We added some support for this mode back in 2015, but the feature was
never productionized. It is completely untested, and there are known
major structural lldb issues that need to be resolved before this
feature can really be supported.
It also complicates making further changes to stop reply packet
handling, which is what I am about to do.
Differential Revision: https://reviews.llvm.org/D110553
If we applied a fix-it before evaluating an expression and that
expression didn't evaluate correctly, we should still tell users about
the fix-it we applied since that may be the reason why it didn't work
correctly.
Differential Revision: https://reviews.llvm.org/D109908
LLDB has a bunch of code that implements REPL support, but all that code is
unreachable as no language in master currently has an implemented REPL backend.
The only REPL that exists is in the downstream Swift fork. All patches for this
generic REPL code therefore also only have tests downstream which is clearly not
a good situation.
This patch implements a basic C language REPL on top of LLDB's REPL framework.
Beside implementing the REPL interface and hooking it up into the plugin
manager, the only other small part of this patch is making the `--language` flag
of the expression command compatible with the `--repl` flag. The `--repl` flag
uses the value of `--language` to see which REPL should be started, but right
now the `--language` flag is only available in OptionGroups 1 and 2, but not in
OptionGroup 3 where the `--repl` flag is declared.
The REPL currently can currently only start if a running target exists. I'll add
the 'create and run a dummy executable' logic from Swift (which is requires when
doing `lldb --repl`) when I have time to translate all this logic to something
that will work with Clang.
I should point out that the REPL currently uses the C expression parser's
approach to persistent variables where only result variables and the ones
starting with a '$' are transferred between expressions. I'll fix that in a
follow up patch. Also the REPL currently doesn't work in a non-interactive
terminal. This seems to be fixed in the Swift fork, so I assume one of our many
REPL downstream changes addresses the issue.
Reviewed By: JDevlieghere
Differential Revision: https://reviews.llvm.org/D87281
Currently you can ask the target symbols add command to locate the debug
symbols for the current frame. This patch add an options to do that for
the whole call stack.
Differential revision: https://reviews.llvm.org/D110011
This moves the logic for adding symbols based on UUID, file and frame
into little helper functions. This is in preparation for D110011.
Differential revision: https://reviews.llvm.org/D110010
Michał Górny