This reverts commit ef82063207.
- It conflicts with the existing llvm::size in STLExtras, which will now
never be called.
- Calling it without llvm:: breaks C++17 compat
This is a re-submission of 24d2405588
without the hunks in HostNativeThreadBase.{h,cpp}, which break builds
on Windows.
Identified with modernize-use-nullptr.
This reverts commit 913457acf0.
It again broke builds on Windows:
lldb/source/Host/common/HostNativeThreadBase.cpp(37,14): error:
assigning to 'lldb::thread_result_t' (aka 'unsigned int') from
incompatible type 'std::nullptr_t'
This is a re-submission of 24d2405588
without the hunk in HostNativeThreadBase.h, which breaks builds on
Windows.
Identified with modernize-use-nullptr.
This reverts commit 24d2405588.
Breaks building on Windows:
../../lldb/include\lldb/Host/HostNativeThreadBase.h(49,36): error:
cannot initialize a member subobject of type 'lldb::thread_result_t'
(aka 'unsigned int') with an rvalue of type 'std::nullptr_t'
lldb::thread_result_t m_result = nullptr;
^~~~~~~
1 error generated.
Version 2 of 'main bin spec' LC_NOTE allows for the specification
of a slide of where the binary is loaded in the corefile virtual
address space. It also adds a (currently unused) platform field
for the main binary.
Some corefile creators will only have a UUID and an offset to be
applied to the binary.
Changed TestFirmwareCorefiles.py to test this new form of
'main bin spec' with a slide, and also to run on both x86_64
and arm64 macOS systems.
Differential Revision: https://reviews.llvm.org/D116094
rdar://85938455
Add lldb support for a Mach-O "load binary" LC_NOTE which provides
a UUID, load address/slide, and possibly a name of a binary that
should be loaded when examining the core.
struct load_binary
{
uint32_t version; // currently 1
uuid_t uuid; // all zeroes if uuid not specified
uint64_t load_address; // virtual address where the macho is loaded, UINT64_MAX if unavail
uint64_t slide; // slide to be applied to file address to get load address, 0 if unavail
char name_cstring[]; // must be nul-byte terminated c-string, '\0' alone if name unavail
} __attribute__((packed));
Differential Revision: https://reviews.llvm.org/D115494
rdar://85069250
With arm64e ARMv8.3 pointer authentication, lldb needs to know how
many bits are used for addressing and how many are used for pointer
auth signing. This should be determined dynamically from the inferior
system / corefile, but there are some workflows where it still isn't
recorded and we fall back on a default value that is correct on some
Darwin environments.
This patch also explicitly sets the vendor of mach-o binaries to
Apple, so we select an Apple ABI instead of a random other ABI.
It adds a function pointer formatter for systems where pointer
authentication is in use, and we can strip the ptrauth bits off
of the function pointer address and get a different value that
points to an actual symbol.
Differential Revision: https://reviews.llvm.org/D115431
rdar://84644661
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
This is a retry of the original patch https://reviews.llvm.org/D113965 which was reverted. There was a deadlock in the Manual DWARF indexing code during symbol preloading where the module was asked on the main thread to preload its symbols, and this would in turn cause the DWARF manual indexing to use a thread pool to index all of the compile units, and if there were relocations on the debug information sections, these threads could ask the ObjectFile to load section contents, which could cause a call to ObjectFileELF::RelocateSection() which would ask for the symbol table from the module and it would deadlock. We can't lock the module in ObjectFile::GetSymtab(), so the solution I am using is to use a llvm::once_flag to create the symbol table object once and then lock the Symtab object. Since all APIs on the symbol table use this lock, this will prevent anyone from using the symbol table before it is parsed and finalized and will avoid the deadlock I mentioned. ObjectFileELF::GetSymtab() was never locking the module lock before and would put off creating the symbol table until somewhere inside ObjectFileELF::GetSymtab(). Now we create it one time inside of the ObjectFile::GetSymtab() and immediately lock it which should be safe enough. This avoids the deadlocks and still provides safety.
Differential Revision: https://reviews.llvm.org/D114288
This reverts commit 951b107eed.
Buildbots were failing, there is a deadlock in /Users/gclayton/Documents/src/llvm/clean/llvm-project/lldb/test/Shell/SymbolFile/DWARF/DW_AT_range-DW_FORM_sec_offset.s when ELF files try to relocate things.
Symbol table parsing has evolved over the years and many plug-ins contained duplicate code in the ObjectFile::GetSymtab() that used to be pure virtual. With this change, the "Symbtab *ObjectFile::GetSymtab()" is no longer virtual and will end up calling a new "void ObjectFile::ParseSymtab(Symtab &symtab)" pure virtual function to actually do the parsing. This helps centralize the code for parsing the symbol table and allows the ObjectFile base class to do all of the common work, like taking the necessary locks and creating the symbol table object itself. Plug-ins now just need to parse when they are asked to parse as the ParseSymtab function will only get called once.
Differential Revision: https://reviews.llvm.org/D113965
Teach LLDB to understand INLINE and INLINE_ORIGIN records in breakpad.
They have the following formats:
```
INLINE inline_nest_level call_site_line call_site_file_num origin_num [address size]+
INLINE_ORIGIN origin_num name
```
`INLNIE_ORIGIN` is simply a string pool for INLINE so that we won't have
duplicated names for inlined functions and can show up anywhere in the symbol
file.
`INLINE` follows immediately after `FUNC` represents the ranges of momery
address that has functions inlined inside the function.
Differential Revision: https://reviews.llvm.org/D113330
The new module stats adds the ability to measure the time it takes to parse and index the symbol tables for each module, and reports modules statistics in the output of "statistics dump" along with the path, UUID and triple of the module. The time it takes to parse and index the symbol tables are also aggregated into new top level key/value pairs at the target level.
Differential Revision: https://reviews.llvm.org/D112279
This patch deals with ObjectFile, ObjectContainer and OperatingSystem
plugins. I'll convert the other types in separate patches.
In order to enable piecemeal conversion, I am leaving some ConstStrings
in the lowest PluginManager layers. I'll convert those as the last step.
Differential Revision: https://reviews.llvm.org/D112061
There is no reason why this function should be returning a ConstString.
While modifying these files, I also fixed several instances where
GetPluginName and GetPluginNameStatic were returning different strings.
I am not changing the return type of GetPluginNameStatic in this patch, as that
would necessitate additional changes, and this patch is big enough as it is.
Differential Revision: https://reviews.llvm.org/D111877
This reverts commits f9aba9a5af and
035217ff51.
As explained in the original commit message, this didn't have the
intended effect of improving the common LLDB use case, but still
provided a marginal improvement for the places where LLDB creates a
scoped time with a string literal.
The reason for the revert is that this change pulls in the os/signpost.h
header in Signposts.h. The former transitively includes loader.h, which
contains a series of macro defines that conflict with MachO.h. There are
ways to work around that, but Adrian and I concluded that none of them
are worth the trade-off in complicating Signposts.h even further.
.. and reduce the scope of others. They don't follow llvm coding
standards (which say they should be used only when the same effect
cannot be achieved with the static keyword), and they set a bad example.
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
A MachO userspace corefile may contain LC_THREAD commands which specify
thread exception state.
For arm64* only (for now), report a human-readable version of this state
as the thread stop reason, instead of 'SIGSTOP'.
As a follow-up, similar functionality can be implemented for x86 cores
by translating the trapno/err exception registers.
rdar://82898146
Differential Revision: https://reviews.llvm.org/D109795
When the corefile reader is adding binaries from the "all image
infos" LC_NOTE in a Mach-O corefile, it would detect if the binary
being added was an executable binary and set it as the Target's
executable binary. This has the side effect of clearing the Target's
image list, so if the executable was in the middle of the all image
infos, the initial images would be dropped. There's no need to set
the executable binary in the Target for these corefile processes,
so instead of doing multiple passes over the list to find the
executable, I'm dropping that.
Fixes the following warning:
$llvm_project/lldb/source/Plugins/ObjectFile/Minidump/MinidumpFileBuilder.cpp:744:11: warning:
format specifies type 'long' but the argument has type 'lldb::offset_t' (aka 'unsigned long long') [-Wformat]
m_data.GetByteSize());
^~~~~~~~~~~~~~~~~~~~
In all these years, we haven't found a use for this function (it has
zero callers). Lets just remove the boilerplate.
Differential Revision: https://reviews.llvm.org/D109600
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
This relands commit aafa05e, reverted in 1f986f6.
Failed tests were fixed.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
This change adds save-core functionality into the ObjectFileELF that enables
saving minidump of a stopped process. This change is mainly targeting Linux
running on x86_64 machines. Minidump should contain basic information needed
to examine state of threads, local variables and stack traces. Full support
for other platforms is not so far implemented. API tests are using LLDB's
MinidumpParser.
Reviewed By: clayborg
Differential Revision: https://reviews.llvm.org/D108233
When adding a dSYM to a Module and it has different file addresses
from the already-present ObjectFile binary, change the Sections to
use the dSYM's file addresses so the symbol table and DWARF are
properly contained in the Sections. Previously this was only done
for IsInMemory ObjectFiles, but it's more common than that.
Differential Revision: https://reviews.llvm.org/D108889
rdar://81504400
These two tests, TestSkinnyCorefile.py and TestStackCorefile.py,
require a new debugserver on darwin systems to run correctly; for now,
skip them if the system debugserver is in use. There's no easy way to
test if the debugserver being used supports either of these memory
region info features. For end users, the fallback will be a full
corefile and that's not the worst thing, but for the tests it is a
problem.
Add a field to the qMemoryRegionInfo packet where the remote stub
can describe the type of memory -- heap, stack. Keep track of
memory regions that are stack memory in lldb. Add a new "--style
stack" to process save-core to request that only stack memory be
included in the corefile.
Differential Revision: https://reviews.llvm.org/D107625
Modify OpenOptions enum to open the future path into synchronizing
vFile:open bits with GDB. Currently, LLDB and GDB use different flag
models effectively making it impossible to match bits. Notably, LLDB
uses two bits to indicate read and write status, and uses union of both
for read/write. GDB uses a value of 0 for read-only, 1 for write-only
and 2 for read/write.
In order to future-proof the code for the GDB variant:
1. Add a distinct eOpenOptionReadWrite constant to be used instead
of (eOpenOptionRead | eOpenOptionWrite) when R/W access is required.
2. Rename eOpenOptionRead and eOpenOptionWrite to eOpenOptionReadOnly
and eOpenOptionWriteOnly respectively, to make it clear that they
do not mean to be combined and require update to all call sites.
3. Use the intersection of all three flags when matching against
the three possible values.
This commit does not change the actual bits used by LLDB.
Differential Revision: https://reviews.llvm.org/D106984
The pointer to the dyld trie data structure which lldb needs to parse to get
"trampoline kinds" on Darwin used to be a field in the LC_DYLD_INFO load command. A
new load command was added recently dedicated to this purpose: LC_DYLD_EXPORTS_TRIE.
The format of the trie did not change, however. So all we have to do is use the new
command if present. The commands are supposed to be mutually exclusive, so I added
an lldb_assert to warn if they are not.
Differential Revision: https://reviews.llvm.org/D107673
This is a resubmission of https://reviews.llvm.org/D105160 after fixing testing issues.
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D106837
This patch adds code to process save-core for Mach-O files which
embeds an "addrable bits" LC_NOTE when the process is using a
code address mask (e.g. AArch64 v8.3 with ptrauth aka arm64e).
Add code to ObjectFileMachO to read that LC_NOTE from corefiles,
and ProcessMachCore to set the process masks based on it when reading
a corefile back in.
Also have "process status --verbose" print the current address masks
that lldb is using internally to strip ptrauth bits off of addresses.
Differential Revision: https://reviews.llvm.org/D106348
rdar://68630113
This fix was created after profiling the target creation of a large C/C++/ObjC application that contained almost 4,000,000 redacted symbol names. The symbol table parsing code was creating names for each of these synthetic symbols and adding them to the name indexes. The code was also adding the object file basename to the end of the symbol name which doesn't allow symbols from different shared libraries to share the names in the constant string pool.
Prior to this fix this was creating 180MB of "___lldb_unnamed_symbol" symbol names and was taking a long time to generate each name, add them to the string pool and then add each of these names to the name index.
This patch fixes the issue by:
- not adding a name to synthetic symbols at creation time, and allows name to be dynamically generated when accessed
- doesn't add synthetic symbol names to the name indexes, but catches this special case as name lookup time. Users won't typically set breakpoints or lookup these synthetic names, but support was added to do the lookup in case it does happen
- removes the object file baseanme from the generated names to allow the names to be shared in the constant string pool
Prior to this fix the startup times for a large application was:
12.5 seconds (cold file caches)
8.5 seconds (warm file caches)
After this fix:
9.7 seconds (cold file caches)
5.7 seconds (warm file caches)
The names of the symbols are auto generated by appending the symbol's UserID to the end of the "___lldb_unnamed_symbol" string and is only done when the name is requested from a synthetic symbol if it has no name.
Differential Revision: https://reviews.llvm.org/D105160
Reverts commits:
"Fix failing tests after https://reviews.llvm.org/D104488."
"Fix buildbot failure after https://reviews.llvm.org/D104488."
"Create synthetic symbol names on demand to improve memory consumption and startup times."
This series of commits broke the windows lldb bot and then failed to fix all of the failing tests.
Pavel Labath