This is basically the same patch as D63233, but converted to
funnel shifts rather than regular shifts. I did not see a
way to effectively share code for these 2 cases though.
This follows D79718 and D79827 to re-fix PR37426 because
that gets canonicalized to funnel shift intrinsics in IR.
I did draft an alternative patch as an enhancement to
"shouldSinkOperands()", but that was awkward because
we have to key the transform from the select, but then
look at both its users and its operands.
Expands on the enablement of the shouldSinkOperands() TLI hook in:
D79718
The last codegen/IR test diff shows what I suspected could happen - we were
sinking all splat shift operands into a loop. But that's not what we want in
general; we only want to sink the *shift amount* operand if it is a splat.
Differential Revision: https://reviews.llvm.org/D79827
Under MVE a vdup will always take a gpr register, not a floating point
value. During DAG combine we convert the types to a bitcast to an
integer in an attempt to fold the bitcast into other instructions. This
is OK, but only works inside the same basic block. To do the same trick
across a basic block boundary we need to convert the type in
codegenprepare, before the splat is sunk into the loop.
This adds a convertSplatType function to codegenprepare to do that,
putting bitcasts around the splat to force the type to an integer. There
is then some adjustment to the code in shouldSinkOperands to handle the
extra bitcasts.
Differential Revision: https://reviews.llvm.org/D78728
them in a special text section.
For sampleFDO, because the optimized build uses profile generated from
previous release, previously we couldn't tell a function without profile
was truely cold or just newly created so we had to treat them conservatively
and put them in .text section instead of .text.unlikely. The result was when
we persuing the best performance by locking .text.hot and .text in memory,
we wasted a lot of memory to keep cold functions inside.
In https://reviews.llvm.org/D66374, we introduced profile symbol list to
discriminate functions being cold versus functions being newly added.
This mechanism works quite well for regular use cases in AutoFDO. However,
in some case, we can only have a partial profile when optimizing a target.
The partial profile may be an aggregated profile collected from many targets.
The profile symbol list method used for regular sampleFDO profile is not
applicable to partial profile use case because it may be too large and
introduce many false positives.
To solve the problem for partial profile use case, we provide an option called
--profile-unknown-in-special-section. For functions without profile, we will
still treat them conservatively in compiler optimizations -- for example,
treat them as warm instead of cold in inliner. When we use profile info to
add section prefix for functions, we will discriminate functions known to be
not cold versus functions without profile (being unknown), and we will put
functions being unknown in a special text section called .text.unknown.
Runtime system will have the flexibility to decide where to put the special
section in order to achieve a balance between performance and memory saving.
Differential Revision: https://reviews.llvm.org/D62540
Summary:
This helps detect some missed BFI updates during CodeGenPrepare.
This is debug build only and disabled behind a flag.
Fix a missed update in CodeGenPrepare::dupRetToEnableTailCallOpts().
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77417
Make the kind of cost explicit throughout the cost model which,
apart from making the cost clear, will allow the generic parts to
calculate better costs. It will also allow some backends to
approximate and correlate the different costs if they wish. Another
benefit is that it will also help simplify the cost model around
immediate and intrinsic costs, where we currently have multiple APIs.
RFC thread:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/141263.html
Differential Revision: https://reviews.llvm.org/D79002
There are several different types of cost that TTI tries to provide
explicit information for: throughput, latency, code size along with
a vague 'intersection of code-size cost and execution cost'.
The vectorizer is a keen user of RecipThroughput and there's at least
'getInstructionThroughput' and 'getArithmeticInstrCost' designed to
help with this cost. The latency cost has a single use and a single
implementation. The intersection cost appears to cover most of the
rest of the API.
getUserCost is explicitly called from within TTI when the user has
been explicit in wanting the code size (also only one use) as well
as a few passes which are concerned with a mixture of size and/or
a relative cost. In many cases these costs are closely related, such
as when multiple instructions are required, but one evident diverging
cost in this function is for div/rem.
This patch adds an argument so that the cost required is explicit,
so that we can make the important distinction when necessary.
Differential Revision: https://reviews.llvm.org/D78635
This method has been commented as deprecated for a while. Remove
it and replace all uses with the equivalent getCalledOperand().
I also made a few cleanups in here. For example, to removes use
of getElementType on a pointer when we could just use getFunctionType
from the call.
Differential Revision: https://reviews.llvm.org/D78882
Summary:
Remove asserting vector getters from Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: dexonsmith, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: cfe-commits, hiraditya, llvm-commits
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D77278
I've always found the "findValue" a little odd and
inconsistent with other things in SDB.
This simplfifies the code in SDB to just handle a splat constant
address or a 2 operand GEP in the same BB. This removes the
need for "findValue" since the operands to the GEP are
guaranteed to be available. The splat constant handling is
new, but was needed to avoid regressions due to constant
folding combining GEPs created in CGP.
CGP is now responsible for canonicalizing gather/scatters into
this form. The pattern I'm using for scalarizing, a scalar GEP
followed by a GEP with an all zeroes index, seems to be subject
to constant folding that the insertelement+shufflevector was not.
Differential Revision: https://reviews.llvm.org/D76947
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: stoklund, sdesmalen, efriedma
Reviewed By: sdesmalen
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77272
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
The attached test case is simplified from tcmalloc. Both function calls should be optimized as tailcall. But llvm can only optimize the first call. The second call can't be optimized because function dupRetToEnableTailCallOpts failed to duplicate ret into block case2.
There 2 problems blocked the duplication:
1 Intrinsic call llvm.assume is not handled by dupRetToEnableTailCallOpts.
2 The control flow is more complex than expected, dupRetToEnableTailCallOpts can only duplicate ret into its predecessor, but here we have an intermediate block between call and ret.
The solutions:
1 Since CodeGenPrepare is already at the end of LLVM IR phase, we can simply delete the intrinsic call to llvm.assume.
2 A general solution to the complex control flow is hard, but for this case, after exit2 is duplicated into case1, exit2 is the only successor of exit1 and exit1 is the only predecessor of exit2, so they can be combined through eliminateFallThrough. But this function is called too late, there is no more dupRetToEnableTailCallOpts after it. We can add an earlier call to eliminateFallThrough to solve it.
Differential Revision: https://reviews.llvm.org/D76539
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not frozen, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple fix for CodeGenPrepare that freezes branch condition when transforming select to branch.
If it is not freezed, instsimplify or the later pipeline can potentially exploit undefined behavior.
The diff shows optimized form becase D75859 and D76048 already made a few changes to CodeGenPrepare for optimizing freeze(cmp).
Reviewers: jdoerfert, spatel, lebedev.ri, efriedma
Reviewed By: lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76179
Summary:
This is a simple patch that expands https://reviews.llvm.org/D75859 to pointer comparison and fcmp
Checked with Alive2
Reviewers: reames, jdoerfert
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76048
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
Summary:
This patch helps CodeGenPrepare move freeze into the icmp when it is used by branch.
It reenables generation of efficient conditional jumps.
This is only done when at least one of icmp's operands is constant to prevent the transformation from increasing # of freeze instructions.
Performance degradation of MultiSource/Benchmarks/Ptrdist/yacr2/yacr2.test is resolved with this patch.
Checked with Alive2
Reviewers: reames, fhahn, nlopes
Reviewed By: reames
Subscribers: jdoerfert, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75859
As the test case shows if there is an ExtractValueInst in the Ret block, function dupRetToEnableTailCallOpts can't duplicate it into the block containing call. So later no tail call is generated in CodeGen.
This patch adds the ExtractValueInst handling code in function dupRetToEnableTailCallOpts and FoldReturnIntoUncondBranch, and later tail call can be generated for this case.
Differential Revision: https://reviews.llvm.org/D74242
This version fixes a buildbot failure cause by picking the wrong insert
point for XORs. We cannot pick the XOR binary operator as insert point,
as it is not guaranteed that both input operands for the overflow
intrinsic are defined before it.
This reverts the revert commit
c7fc0e5da6.
This changes the SimplifyLibCalls utility to accept an IRBuilderBase,
which allows us to pass through the IRBuilder used by InstCombine.
This will ensure that new instructions get added to the worklist.
The annotated test-case drops from 4 to 2 InstCombine iterations thanks
to this.
To achieve this, I'm adding an IRBuilderBase::OperandBundlesGuard,
which is basically the same as the existing InsertPointGuard and
FastMathFlagsGuard, but for operand bundles. Also add a
setDefaultOperandBundles() method so these can be set outside the
constructor.
Differential Revision: https://reviews.llvm.org/D74792
Instcombine folds (a + b <u a) to (a ^ -1 <u b) and that does not match
the expected pattern in CodeGenPerpare via UAddWithOverflow.
This causes a regression over Clang 7 on both X86 and AArch64:
https://gcc.godbolt.org/z/juhXYV
This patch extends UAddWithOverflow to also catch the XOR case, if the
XOR is only used in the ICMP. This covers just a single case, but I'd
like to make sure I am not missing anything before tackling the other
cases.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: nikic, lebedev.ri
Differential Revision: https://reviews.llvm.org/D74228
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
Summary:
Right now the alignment of the lower half of a store is computed as
align/2, which fails for unaligned stores (align = 1), and is overly
pessimitic for, e.g. a 8 byte store aligned to 4 bytes.
Fixes PR44851
Fixes PR44877
Reviewers: gchatelet, spatel, lebedev.ri
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74311
shouldOptimizeForSize is showing up in a profile, spending around 10%
of the pass time in one function. This should probably not be so slow,
but the much cheaper attribute check should be done first anyway.
The code paths in the absence of TargetMachine, TargetLowering or
TargetRegisterInfo are poorly tested. As rL285987 said, requiring
TargetPassConfig allows us to delete many (untested) checks littered
everywhere.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D73754
Summary:
Without the BFI update, some hot blocks are incorrectly treated as cold code.
This fixes a FDO perf regression in the TSVC benchmark from D71288.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73146
This patch also fixes up a number of cases in DAGCombine and
SelectionDAGBuilder where the size of a scalable vector is used in a
fixed-width context (thus triggering an assertion failure).
Reviewers: efriedma, c-rhodes, rovka, cameron.mcinally
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71215
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Summary:
Guard against a potential crash observed in https://github.com/JuliaLang/julia/issues/32994#issuecomment-524249628
If two branches are collapsed we can encounter a degenerate conditional branch `TBB==FBB`.
The subsequent code assumes that they differ, so we exit out early.
Reviewers: ributzka, spatel
Subscribers: loladiro, dexonsmith, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66657
This has two main effects:
- Optimizes debug info size by saving 221.86 MB of obj file size in a
Windows optimized+debug build of 'all'. This is 3.03% of 7,332.7MB of
object file size.
- Incremental step towards decoupling target intrinsics.
The enums are still compact, so adding and removing a single
target-specific intrinsic will trigger a rebuild of all of LLVM.
Assigning distinct target id spaces is potential future work.
Part of PR34259
Reviewers: efriedma, echristo, MaskRay
Reviewed By: echristo, MaskRay
Differential Revision: https://reviews.llvm.org/D71320
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
A second try after reverted D71072.
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71149
CodeGenPrepare::placeDebugValues moves variable location intrinsics to be
immediately after the Value they refer to. This makes tracking of locations
very easy; but it changes the order in which assignments appear to the
debugger, from the source programs order to the order in which the
optimised program computes values. This then leads to PR43986 and PR38754,
where variable locations that were in a conditional block are made
unconditional, which is highly misleading.
This patch adjusts placeDbgValues to only re-order variable location
intrinsics if they use a Value before it is defined, significantly reducing
the damage that it does. This is still not 100% safe, but the rest of
CodeGenPrepare needs polishing to correctly update debug info when
optimisations are performed to fully fix this.
This will probably break downstream debuginfo tests -- if the
instruction-stream position of variable location changes isn't the focus of
the test, an easy fix should be to manually apply placeDbgValues' behaviour
to the failing tests, moving dbg.value intrinsics next to SSA variable
definitions thus:
%foo = inst1
%bar = ...
%baz = ...
void call @llvm.dbg.value(metadata i32 %foo, ...
to
%foo = inst1
void call @llvm.dbg.value(metadata i32 %foo, ...
%bar = ...
%baz = ...
This should return your test to exercising whatever it was testing before.
Differential Revision: https://reviews.llvm.org/D58453
Summary:
Split off of D67120.
Add the profile guided size optimization instrumentation / queries in the code
gen or target passes. This doesn't enable the size optimizations in those passes
yet as they are currently disabled in shouldOptimizeForSize (for non-IR pass
queries).
Reviewers: davidxl
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71072
One of CodeGenPrepare's optimizations is to duplicate address calculations
into basic blocks, so that as much information as possible can be folded
into memory addressing operands. This is great -- but the dbg.value
variable location intrinsics are not updated in the same way. This can lead
to dbg.values referring to address computations in other blocks that will
never be encoded into the DAG, while duplicate address computations are
performed locally that could be used by the dbg.value. Some of these (such
as non-constant-offset GEPs) can't be salvaged past.
Fix this by, whenever we duplicate an address computation into a block,
looking for dbg.value users of the original memory address in the same
block, and redirecting those to the local computation.
Differential Revision: https://reviews.llvm.org/D58403
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
For example:
long long test(long long a, long long b) {
if (a << b > 0)
return b;
if (a << b < 0)
return a;
return a*b;
}
Produces:
sld. 5, 3, 4
ble 0, .LBB0_2
mr 3, 4
blr
.LBB0_2: # %if.end
cmpldi 5, 0
li 5, 1
isel 4, 4, 5, 2
mulld 3, 4, 3
blr
But the compare (cmpldi 5, 0) is redundant and can be removed (CR0 already
contains the result of that comparison).
The root cause of this is that LLVM converts signed comparisons into equality
comparison based on dominance. Equality comparisons are unsigned by default, so
we get either a record-form or cmp (without the l for logical) feeding a cmpl.
That is the situation we want to avoid here.
Differential Revision: https://reviews.llvm.org/D60506
Add a pass to lower is.constant and objectsize intrinsics
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374784
This pass lowers is.constant and objectsize intrinsics not simplified by
earlier constant folding, i.e. if the object given is not constant or if
not using the optimized pass chain. The result is recursively simplified
and constant conditionals are pruned, so that dead blocks are removed
even for -O0. This allows inline asm blocks with operand constraints to
work all the time.
The new pass replaces the existing lowering in the codegen-prepare pass
and fallbacks in SDAG/GlobalISEL and FastISel. The latter now assert
on the intrinsics.
Differential Revision: https://reviews.llvm.org/D65280
llvm-svn: 374743
The static analyzer is warning about potential null dereferences, but in these cases we should be able to use cast<> directly and if not assert will fire for us.
llvm-svn: 374085
Summary:
An erroneously negated if-statement by an earlier (March 2019) bugfix left phi replacement/simplification under optimizeMemoryInst() in CodeGenPrepare largely inactivated. The error was found when csmith found that the same assert as in the original bug report could still be triggered in a different way. This patch fixes the bugfix. The original bug was:
https://bugs.llvm.org/show_bug.cgi?id=41052
... and the previous fix was D59358.
Reviewers: aprantl, skatkov
Reviewed By: skatkov
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67838
llvm-svn: 373084
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372866
In MVE, as of rL371218, we are attempting to sink chains of instructions such as:
%l1 = insertelement <8 x i8> undef, i8 %l0, i32 0
%broadcast.splat26 = shufflevector <8 x i8> %l1, <8 x i8> undef, <8 x i32> zeroinitializer
In certain situations though, we can end up breaking the dominance relations of
instructions. This happens when we sink the instruction into a loop, but cannot
remove the originals. The Use is updated, which might in fact be a Use from the
second instruction to the first.
This attempts to fix that by reversing the order of instruction that are sunk,
and ensuring that we update the uses on new instructions if they have already
been sunk, not the old ones.
Differential Revision: https://reviews.llvm.org/D67366
llvm-svn: 371743
Up to now, we've decided whether to sink address calculations using GEPs or
normal arithmetic based on the useAA hook, but there are other reasons GEPs
might be preferred. So this patch splits the two questions, with a default
implementation falling back to useAA.
llvm-svn: 371721
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
I don't think anything in this loop modifies the control flow and we don't restart any iteration after setting the flag.
This code was added in http://reviews.llvm.org/D16893 but looking at the test case added there the code that caused the dominator tree to change was merging blocks with their predecessor not the bitreverse optimization.
Differential Revision: https://reviews.llvm.org/D66366
llvm-svn: 369283
If OptimizeExtractBits() encountered a shift instruction with no operands at all,
it would erase the instruction, but still return false.
This previously didn’t matter because its caller would always return after
processing the instruction, but https://reviews.llvm.org/D63233 changed the
function’s caller to fall through if it returned false, which would then cause
a use-after-free detectable by ASAN.
This change makes OptimizeExtractBits return true if it removes a shift
instruction with no users, terminating processing of the instruction.
Patch by: @brentdax (Brent Royal-Gordon)
Differential Revision: https://reviews.llvm.org/D66330
llvm-svn: 369168
Now that we've moved to C++14, we no longer need the llvm::make_unique
implementation from STLExtras.h. This patch is a mechanical replacement
of (hopefully) all the llvm::make_unique instances across the monorepo.
llvm-svn: 369013
Summary:
The old code can be simplified to define the element type of TailCalls as `BasicBlock` not `CallInst`. Also I use the for-range loop instead the for loop.
Reviewed By: jsji
Differential Revision: https://reviews.llvm.org/D64905
llvm-svn: 367644
Some GEPs were not being split, presumably because that split would just be
undone by the DAGCombiner. Not performing those splits can prevent important
optimizations, such as preventing the element indices / member offsets from
being (partially) folded into load/store instruction immediates. This patch:
- Makes the splits also occur in the cases where the base address and the GEP
are in the same BB.
- Ensures that the DAGCombiner doesn't reassociate them back again.
Differential Revision: https://reviews.llvm.org/D60294
llvm-svn: 363544
This is based on the example/discussion in PR37428:
https://bugs.llvm.org/show_bug.cgi?id=37428
Proper vector shift instructions don't appear until AVX2, so we may generate several
extra instructions within a loop trying to compensate for that. It's difficult to
recover from that shift expansion later than this, so use the existing TLI hook and
splat analysis to enable better codegen.
This extends CGP functionality introduced with:
rL201655
Differential Revision: https://reviews.llvm.org/D63233
llvm-svn: 363511
For some reason multiple places need to do this, and the variant the
loop unroller and inliner use was not handling it.
Also, introduce a new wrapper to be slightly more precise, since on
AMDGPU some addrspacecasts are free, but not no-ops.
llvm-svn: 362436
Just a minor refactoring to use the new helper method
DataLayout::typeSizeEqualsStoreSize(). This is done when
checking if getTypeSizeInBits is equal/non-equal to
getTypeStoreSizeInBits.
llvm-svn: 361613
Summary:
It is a common thing to loop over every `PHINode` in some `BasicBlock`
and change old `BasicBlock` incoming block to a new `BasicBlock` incoming block.
`replaceSuccessorsPhiUsesWith()` already had code to do that,
it just wasn't a function.
So outline it into a new function, and use it.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61013
llvm-svn: 359996
Summary:
There is `PHINode::getBasicBlockIndex()`, `PHINode::setIncomingBlock()`
and `PHINode::getNumOperands()`, but no function to replace every
specified `BasicBlock*` predecessor with some other specified `BasicBlock*`.
Clearly, there are a lot of places that could use that functionality.
Reviewers: chandlerc, craig.topper, spatel, danielcdh
Reviewed By: craig.topper
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D61011
llvm-svn: 359995
This is a subset of the original commit from rL359879
which was reverted because it could crash when using the 'RemovedInstructions'
structure that enables delayed deletion of dead instructions. The motivating
compile-time win does not require that change though. We should get most of
that win from this change alone.
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359969
Using/updating a dominator tree to match math overflow patterns may be very
expensive in compile-time (because of the way CGP uses a DT), so just handle
the single-block case.
Also, we were restarting the iterator loops when doing the overflow intrinsic
transforms by marking the dominator tree for update. That was done to prevent
iterating over a removed instruction. But we can postpone the deletion using
the existing "RemovedInsts" structure, and that means we don't need to update
the DT.
See post-commit thread for rL354298 for more details:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190422/646276.html
Differential Revision: https://reviews.llvm.org/D61075
llvm-svn: 359879
The simple case of:
```
int *callee();
void *caller(void *a) {
if (a == NULL)
return callee();
return a;
}
```
would generate a regular call instead of a tail call because we don't
look through the bitcast of the call to `callee` when duplicating the
return blocks.
Differential Revision: https://reviews.llvm.org/D60837
llvm-svn: 359041
Summary:
A recent fix (r355751) caused a compile time regression because setting
the ModifiedDT flag in optimizeSelectInst means that each time a select
instruction is optimized the function walk in runOnFunction stops and
restarts again (which was needed to build a new DT before we started
building it lazily in r356937). Now that the DT is built lazily, a
simple fix is to just reset the DT at this point, rather than restarting
the whole function walk.
In the future other places that set ModifiedDT may want to switch to
just resetting the DT directly. But that will require an evaluation to
ensure that they don't otherwise need to restart the function walk.
Reviewers: spatel
Subscribers: jdoerfert, llvm-commits, xur
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59889
llvm-svn: 357111
Summary:
In r355512 CGP was changed to build the DominatorTree only once per
function traversal, to avoid repeatedly building it each time it was
accessed. This solved one compile time issue but introduced another. In
the second case, we now were building the DT unnecessarily many times
when we performed many function traversals (i.e. more than once per
function when running CGP because of changes made each time).
Change to saving the DT in the CodeGenPrepare object, and building it
lazily when needed. It is reset whenever we need to rebuild it.
The case that exposed the issue there are 617 functions, and we walk
them (i.e. execute the "while (MadeChange)" loop in runOnFunction) a
total of 12083 times (so previously we were building the DT 12083
times). With this patch we only build the DT 844 times (average of 1.37
times per function). We dropped the total time to compile this file from
538.11s without this patch to 339.63s with it.
There is still an issue as CGP is taking much longer than all other
passes even with this patch, and before a recent compiler release cut at
r355392 the total time to this compile was only 97 sec with a huge
reduction in CGP time. I suspect that one of the other recent changes to
CGP led to iterating each function many more times on average, but I
need to do some more investigation.
Reviewers: spatel
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59696
llvm-svn: 356937
This is probably a bigger limitation than necessary, but since we don't have any evidence yet
that this transform led to real-world perf improvements rather than regressions, I'm making a
quick, blunt fix.
In the motivating x86 example from:
https://bugs.llvm.org/show_bug.cgi?id=41129
...and shown in the regression test, we want to avoid an extra instruction in the dominating
block because that could be costly.
The x86 LSR test diff is reversing the changes from D57789. There's no evidence that 1 version
is any better than the other yet.
Differential Revision: https://reviews.llvm.org/D59602
llvm-svn: 356665
This should be extended, but CGP does some strange things,
so I'm intentionally not changing the potential order of
any transforms yet.
llvm-svn: 356566
Summary:
This is a fix to bug 41052:
https://bugs.llvm.org/show_bug.cgi?id=41052
While trying to optimize a memory instruction in a dead basic block, we end up registering the same phi for replacement twice. This patch avoids registering more than the first replacement candidate for a phi.
Patch by: JesperAntonsson
Reviewers: skatkov, aprantl
Reviewed By: aprantl
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59358
llvm-svn: 356260
This is almost the same as:
rL355345
...and should prevent any potential crashing from examples like:
https://bugs.llvm.org/show_bug.cgi?id=41064
...although the bug was masked by:
rL355823
...and I'm not sure how to repro the problem after that change.
llvm-svn: 356218
Targets can potentially emit more efficient code if they know address
computations never overflow. For example ILP32 code on AArch64 (which only has
64-bit address computation) can ignore the possibility of overflow with this
extra information.
llvm-svn: 355926
Inserting an overflowing arithmetic intrinsic can increase register
pressure by producing two values at a point where only one is needed,
while the second use maybe several blocks away. This increase in
pressure is likely to be more detrimental on performance than
rematerialising one of the original instructions.
So, check that the arithmetic and compare instructions are no further
apart than their immediate successor/predecessor.
Differential Revision: https://reviews.llvm.org/D59024
llvm-svn: 355823
r44412 fixed a huge compile time regression but it needed ModifiedDT flag to be
maintained correctly in optimizations in optimizeBlock() and optimizeInst().
Function optimizeSelectInst() does not update the flag.
This patch propagates the flag in optimizeSelectInst() back to
optimizeBlock().
This patch also removes ModifiedDT in CodeGenPrepare class (which is not used).
The property of ModifiedDT is now recorded in a ref parameter.
Differential Revision: https://reviews.llvm.org/D59139
llvm-svn: 355751
Summary:
In r354298 a DominatorTree construction was added via new function
combineToUSubWithOverflow, which was subsequently restructured into
replaceMathCmpWithIntrinsic in r354689. We are hitting a very long
compile time due to this repeated construction, once per math cmp in
the function.
We shouldn't need to build the DominatorTree more than once per
function, except when a transformation invalidates it. There is already
a boolean flag that is returned from these methods indicating whether
the DT has been modified. We can simply build the DT once per
Function walk in CodeGenPrepare::runOnFunction, since any time a change
is made we break out of the Function walk and restart it.
I modified the code so that both replaceMathCmpWithIntrinsic as well as
mergeSExts (which was also building a DT) use the DT constructed by the
run method.
From -mllvm -time-passes:
Before this patch: CodeGen Prepare user time is 328s
With this patch: CodeGen Prepare user time is 21s
Reviewers: spatel
Subscribers: jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D58995
llvm-svn: 355512
The test is reduced from an example in the post-commit thread for:
rL354746
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20190304/632396.html
While we must avoid dying here, the real question should be:
Why is non-canonical and/or degenerate code making it to CGP when
using the new pass manager?
llvm-svn: 355345
There's likely a missed IR canonicalization for at least 1 of these
patterns. Otherwise, we wouldn't have needed the pattern-matching
enhancement in D57516.
Note that -- unlike usubo added with D57789 -- the TLI hook for
this transform defaults to 'on'. So if there's any perf fallout
from this, targets should look at how they're lowering the uaddo
node in SDAG and/or override that hook.
The x86 diffs suggest that there's some missing pattern-matching
for forming inc/dec.
This should fix the remaining known problems in:
https://bugs.llvm.org/show_bug.cgi?id=40486https://bugs.llvm.org/show_bug.cgi?id=31754
llvm-svn: 354746
Sanjay Patel