RISCV has to use 2 shifts for (i64 (zext_inreg X, i32)), but we
can use addiw rd, rs1, x0 for sext_inreg. We already understood this
when type legalizing i32 seteq/ne on rv64. But this transform in
SimplifySetCC would sometimes undo it.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D95289
This patch adds support for scalable-vector splats in DAGCombiner's
`isConstantOrConstantVector` and `ISD::matchUnaryPredicate` functions,
which enable the SelectionDAG div/rem-by-constant optimizations for
scalable vector types.
It also fixes up one case where the UDIV optimization was generating a
SETCC without first consulting the target for its preferred SETCC result
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94501
For now, we correct the result for sqrt if iteration > 0. This doesn't make
sense as they are not strict relative.
Reviewed By: dmgreen, spatel, RKSimon
Differential Revision: https://reviews.llvm.org/D94480
Noticed while I was touching other nearby code. I don't have a
test where this matters because the targets I work on
use zero or one boolean contents. And the tests cases I've seen
this fire on happen before type legalization where the result type
is MVT::i1 so the distinction doesn't matter.
There was code to handle the first operand being different than
the result type. And code to handle first operand having the
same type as the type to extend from. This should never happen
for a correctly formed SIGN_EXTEND_INREG. I've replace the
code with asserts.
I also noticed we created the same APInt twice so I've reused it.
Add DemandedElts support inside the TRUNCATE analysis.
REAPPLIED - this was reverted by @hans at rGa51226057fc3 due to an issue with vector shift amount types, which was fixed in rG935bacd3a724 and an additional test case added at rG0ca81b90d19d
Differential Revision: https://reviews.llvm.org/D56387
As noticed on D56387, for vectors we must always correctly adjust the shift amount type during truncation (not just after legalization). We were getting away with it as we currently only accepted scalars via the dyn_cast<ConstantSDNode>.
It caused "Vector shift amounts must be in the same as their first arg"
asserts in Chromium builds. See the code review for repro instructions.
> Add DemandedElts support inside the TRUNCATE analysis.
>
> Differential Revision: https://reviews.llvm.org/D56387
This reverts commit cad4275d69.
Use the KnownBits icmp comparisons to determine when a ISD::UMIN/UMAX op is unnecessary should either op be known to be ULT/ULE or UGT/UGE than the other.
Differential Revision: https://reviews.llvm.org/D94532
These methods are recursive so a little costly.
We only look at the result in one place in this function and it's
conditional. We also only need the second call if the first had
enough returned enough sign bits.
This improves llvm::isConstOrConstSplat by allowing it to analyze
ISD::SPLAT_VECTOR nodes, in order to allow more constant-folding of
operations using scalable vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94168
Attempt to simplify all/any-of style patterns that concatenate 2 smaller integers together into an and(x,y)/or(x,y) + icmp 0/-1 instead.
This is mainly to help some bool predicate reduction patterns where we end up concatenating bool vectors that have been bitcasted to integers.
Differential Revision: https://reviews.llvm.org/D93599
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
Changes in this patch:
- Minor changes to the LowerVECREDUCE_SEQ_FADD function added by @cameron.mcinally
to also work for scalable types
- Added TableGen patterns for FP reductions with unpacked types (nxv2f16, nxv4f16 & nxv2f32)
- Asserts added to expandFMINNUM_FMAXNUM & expandVecReduceSeq for scalable types
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D93050
Move the X86 VSELECT->UADDSAT fold to DAGCombiner - there's nothing target specific about these folds.
The SSE42 test diffs are relatively benign - its avoiding an extra constant load in exchange for an extra xor operation - there are extra register moves, which is annoying as all those operations should commute them away.
Differential Revision: https://reviews.llvm.org/D91876
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
Differential Revision: https://reviews.llvm.org/D92183
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
If smax() is legal, this is likely to result in smaller codegen expansion for abs(x) than the xor(add,ashr) method.
This is also what PowerPC has been doing for its abs implementation, so it lets us get rid of a load of custom lowering code there (and which was never updated when they added smax lowering).
Alive2: https://alive2.llvm.org/ce/z/xRk3cD
Differential Revision: https://reviews.llvm.org/D92095
`SimplifySetCC` invokes `getNodeIfExists` without passing `Flags` argument and `getNodeIfExists` uses a default `SDNodeFlags` to intersect the original flags, as a consequence, flags like `nsw` is dropped. Added a new helper function `doesNodeExist` to check if a node exists without modifying its flags.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D89938
This is part of the discussion on D91876 about trying to reduce custom lowering of MIN/MAX ops on older SSE targets - if we can improve generic vector expansion we should be able to relax the limitations in SelectionDAGBuilder when it will let MIN/MAX ops be generated, and avoid having to flag so many ops as 'custom'.
Lowers the llvm.masked.scatter intrinsics (scalar plus vector addressing mode only)
Changes included in this patch:
- Custom lowering for MSCATTER, which chooses the appropriate scatter store opcode to use.
Floating-point scatters are cast to integer, with patterns added to match FP reinterpret_casts.
- Added the getCanonicalIndexType function to convert redundant addressing
modes (e.g. scaling is redundant when accessing bytes)
- Tests with 32 & 64-bit scaled & unscaled offsets
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90941
Add a TLI hook to allow SelectionDAG to fine tune the conversion of CTPOP to a chain of "x & (x - 1)" when CTPOP isn't legal.
A subsequent patch will attempt to fine tune the X86 code gen.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89952
This patch uses the existing LowerFixedLengthReductionToSVE function to also lower
scalable vector reductions. A separate function has been added to lower VECREDUCE_AND
& VECREDUCE_OR operations with predicate types using ptest.
Lowering scalable floating-point reductions will be addressed in a follow up patch,
for now these will hit the assertion added to expandVecReduce() in TargetLowering.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D89382
Add Legalization support for VECREDUCE_SEQ_FADD, so that we don't need to depend on ExpandReductionsPass.
Differential Revision: https://reviews.llvm.org/D90247
For i1 types, boolean false is represented identically regardless of
the boolean content, so we can allow optimizations that otherwise
would not be correct for booleans with false represented as a negative
one.
Patch by Erik Hogeman.
Differential Revision: https://reviews.llvm.org/D90145
Some of our conversion algorithms produce -0.0 when converting unsigned i64 to double when the rounding mode is round toward negative. This switches them to other algorithms that don't have this problem. Since it is undefined behavior to change rounding mode with the non-strict nodes, this patch only changes the behavior for strict nodes.
There are still problems with unsigned i32 conversions too which I'll try to fix in another patch.
Fixes part of PR47393
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87115
Updates an optimization that relies on boolean contents being either 0
or 1 to properly check for this before triggering.
The following:
(X & 8) != 0 --> (X & 8) >> 3
Produces unexpected results when a boolean 'true' value is represented
by negative one.
Patch by Erik Hogeman.
Differential Revision: https://reviews.llvm.org/D89390
This enables these transforms for vectors:
(ctpop x) u< 2 -> (x & x-1) == 0
(ctpop x) u> 1 -> (x & x-1) != 0
(ctpop x) == 1 --> (x != 0) && ((x & x-1) == 0)
(ctpop x) != 1 --> (x == 0) || ((x & x-1) != 0)
All enabled if CTPOP isn't Legal. This differs from the scalar
behavior where the first two are done unconditionally and the
last two are done if CTPOP isn't Legal or Custom. The Legal
check produced better results for vectors based on X86's
custom handling. Might be worth re-visiting scalars here.
I disabled the looking through truncate for vectors. The
code that creates new setcc can use the same result VT as the
original setcc even if we truncated the input. That may work
work for most scalars, but definitely wouldn't work for vectors
unless it was a vector of i1.
Fixes or at least improves PR47825
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89346
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
In certain places in the code we can never end up in a situation where
we're mixing fixed width and scalable vector types. For example,
we can't have truncations and extends that change the lane count. Also,
in other places such as GenWidenVectorStores and GenWidenVectorLoads we
know from the behaviour of FindMemType that we can never choose a vector
type with a different scalable property.
In various places I have used EVT::bitsXY functions instead of
TypeSize::isKnownXY, where it probably makes sense to keep an assert
that scalable properties match.
Differential Revision: https://reviews.llvm.org/D88654
As requested in D89346. This allows us to add some early outs.
I reordered some checks a little bit to make the more common bail outs happen earlier. Like checking opcode before checking hasOneUse. And I moved the bit width check to make sure it was safe to look through a truncate to the spot where we look through truncates instead of after.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89494
This combine can look through (trunc (ctpop X)). When doing this
it tries to make sure the trunc doesn't lose any information
from the ctpop. It does this by checking that the truncated type
has more bits that Log2_32_Ceil of the ctpop type. The Ceil is
unnecessary and pessimizes non-power of 2 types.
For example, ctpop of i256 requires 9 bits to represent the max
value of 256. But ctpop of i255 only requires 8 bits to represent
the max result of 255. Log2_32_Ceil of 256 and 255 both return 8
while Log2_32 returns 8 for 256 and 7 for 255
The code with popcnt enabled is a regression for this test case,
but it does match what already happens with i256 truncated to i9.
Since power of 2 is more likely, I don't think it should block
this change.
Differential Revision: https://reviews.llvm.org/D89412
We were already doing this for integer constants. This patch implements
the same thing for floating point constants.
Differential Revision: https://reviews.llvm.org/D88570
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
This reverts partial of a2fb5446 (actually, 2508ef01) about removing
negated FP constant immediately if it has no uses. However, as discussed
in bug 47517, there're cases when NegX is folded into constant from
other places while NegY is removed by that line of code and NegX is
equal to NegY. In these cases, NegX is deleted before used and crash
happens. So revert the code and add necessary test case.
When we know that a particular type is always going to be fixed
width we have so far been writing code like this:
getSizeInBits().getFixedSize()
Since we are doing this in quite a few places now it seems to make
sense to add a new helper function that allows us to replace
these calls with a single getFixedSizeInBits() call.
Differential Revision: https://reviews.llvm.org/D88649
2508ef01 fixed a bug about constant removal in negation. But after
sanitizing check I found there's still some issue about it so it's
reverted.
Temporary nodes will be removed if useless in negation. Before the
removal, they'd be checked if any other nodes used it. So the removal
was moved after getNode. However in rare cases the node to be removed is
the same as result of getNode. We missed that and will be fixed by this
patch.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
Craig Topper