This adds uses for locals introduced for new debug messages for the load store optimizer. Those locals are only used on debug statements and otherwise create unused variable warnings.
Differential Revision: https://reviews.llvm.org/D94398
This extends the distributing postinc code in load/store optimizer to
also handle the case where there is an existing pre/post inc instruction,
where subsequent instructions can be modified to use the adjusted
offset from the increment. This can save us having to keep the old
register live past the increment instruction.
Differential Revision: https://reviews.llvm.org/D83377
This adds sign/zero extending scalar loads/stores to the MVE
instructions added in D77813, allowing us to create up more post-inc
instructions. These are comparatively simple, compared to LDR/STR (which
may be better turned into an LDRD/LDM), but still require some additions
over MVE instructions. Because there are i12 and i8 variants of the
offset loads/stores dealing with different signs, we may need to convert
an i12 address to a i8 negative instruction. t2LDRBi12 can also be
shrunk to a tLDRi under the right conditions, so we need to be careful
with codesize too.
Differential Revision: https://reviews.llvm.org/D78625
This adds some extra processing into the Pre-RA ARM load/store optimizer
to detect and merge MVE loads/stores and adds of the same base. This we
don't always turn into a post-inc during ISel, and due to the nature of
it being a graph we don't always know an order to use for the nodes, not
knowing which nodes to make post-inc and which to use the new post-inc
of. After ISel, we have an order that we can use to post-inc the
following instructions.
So this looks for a loads/store with a starting offset of 0, and an
add/sub from the same base, plus a number of other loads/stores. We then
do some checks and convert the zero offset load/store into a postinc
variant. Any loads/stores after it have the offset subtracted from their
immediates. For example:
LDR #4 LDR #4
LDR #0 LDR_POSTINC #16
LDR #8 LDR #-8
LDR #12 LDR #-4
ADD #16
It only handles MVE loads/stores at the moment. Normal loads/store will
be added in a followup patch, they just have some extra details to
ensure that we keep generating LDRD/LDM successfully.
Differential Revision: https://reviews.llvm.org/D77813
Summary:
This is patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: arsenm, dschuff, sdardis, nemanjai, jvesely, nhaehnle, sbc100, jgravelle-google, hiraditya, aheejin, kbarton, jrtc27, atanasyan, jfb, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76925
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma, andreadb
Reviewed By: efriedma
Subscribers: gbedwell, john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Summary:
This patch fixes pr23772 [ARM] r226200 can emit illegal thumb2 instruction: "sub sp, r12, #80".
The violation was that SUB and ADD (reg, immediate) instructions can only write to SP if the source register is also SP. So the above instructions was unpredictable.
To enforce that the instruction t2(ADD|SUB)ri does not write to SP we now enforce the destination register to be rGPR (That exclude PC and SP).
Different than the ARM specification, that defines one instruction that can read from SP, and one that can't, here we inserted one that can't write to SP, and other that can only write to SP as to reuse most of the hard-coded size optimizations.
When performing this change, it uncovered that emitting Thumb2 Reg plus Immediate could not emit all variants of ADD SP, SP #imm instructions before so it was refactored to be able to. (see test/CodeGen/Thumb2/mve-stacksplot.mir where we use a subw sp, sp, Imm12 variant )
It also uncovered a disassembly issue of adr.w instructions, that were only written as SUBW instructions (see llvm/test/MC/Disassembler/ARM/thumb2.txt).
Reviewers: eli.friedman, dmgreen, carwil, olista01, efriedma
Reviewed By: efriedma
Subscribers: john.brawn, efriedma, ostannard, kristof.beyls, hiraditya, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70680
Summary:
This clang-tidy check is looking for unsigned integer variables whose initializer
starts with an implicit cast from llvm::Register and changes the type of the
variable to llvm::Register (dropping the llvm:: where possible).
Partial reverts in:
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
X86FixupLEAs.cpp - Some functions return unsigned and arguably should be MCRegister
X86FrameLowering.cpp - Some functions return unsigned and arguably should be MCRegister
HexagonBitSimplify.cpp - Function takes BitTracker::RegisterRef which appears to be unsigned&
MachineVerifier.cpp - Ambiguous operator==() given MCRegister and const Register
PPCFastISel.cpp - No Register::operator-=()
PeepholeOptimizer.cpp - TargetInstrInfo::optimizeLoadInstr() takes an unsigned&
MachineTraceMetrics.cpp - MachineTraceMetrics lacks a suitable constructor
Manual fixups in:
ARMFastISel.cpp - ARMEmitLoad() now takes a Register& instead of unsigned&
HexagonSplitDouble.cpp - Ternary operator was ambiguous between unsigned/Register
HexagonConstExtenders.cpp - Has a local class named Register, used llvm::Register instead of Register.
PPCFastISel.cpp - PPCEmitLoad() now takes a Register& instead of unsigned&
Depends on D65919
Reviewers: arsenm, bogner, craig.topper, RKSimon
Reviewed By: arsenm
Subscribers: RKSimon, craig.topper, lenary, aemerson, wuzish, jholewinski, MatzeB, qcolombet, dschuff, jyknight, dylanmckay, sdardis, nemanjai, jvesely, wdng, nhaehnle, sbc100, jgravelle-google, kristof.beyls, hiraditya, aheejin, kbarton, fedor.sergeev, javed.absar, asb, rbar, johnrusso, simoncook, apazos, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, atanasyan, rogfer01, MartinMosbeck, brucehoult, the_o, tpr, PkmX, jocewei, jsji, Petar.Avramovic, asbirlea, Jim, s.egerton, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65962
llvm-svn: 369041
This should hopefully lead to minor improvements in code generation, and
more accurate spill/reload comments in assembly.
Also fix isLoadFromStackSlotPostFE/isStoreToStackSlotPostFE so they
don't lead to misleading assembly comments for merged memory operands;
this is technically orthogonal, but in practice the relevant memory
operand lists don't show up without this change.
Differential Revision: https://reviews.llvm.org/D59713
llvm-svn: 356963
As requested during review of D57601 <https://reviews.llvm.org/D57601> https://reviews.llvm.org/D57601, be equally conservative for atomic MMOs as for volatile MMOs in all in tree backends. At the moment, all atomic MMOs are also volatile, but I'm about to change that.
Differential Revision: https://reviews.llvm.org/D58490
Note: D58498 landed in several pieces as individual backends were approved. This is the last chunk.
llvm-svn: 354845
The whole design of generating LDMs/STMs is fragile and unreliable: it depends on
rescheduling here in the LoadStoreOptimizer that isn't register pressure aware
and regalloc that isn't aware of generating LDMs/STMs.
This patch adds a (hidden) option to control the total number of instructions that
can be re-ordered. I appreciate this looks only a tiny bit better than a hard-coded
constant, but at least it allows more easy experimentation with different values
for now. Ideally we calculate this reorder limit based on some heuristics, and take
register pressure into account. I might be looking into that next.
Differential Revision: https://reviews.llvm.org/D57954
llvm-svn: 353678
In many places in the backend, we like to know whether we're
optimising for code size and this is performed by checking the
current machine function attributes. A subtarget is created on a
per-function basis, so it's possible to know when we're compiling for
code size on construction so record this in the new object.
Differential Revision: https://reviews.llvm.org/D57812
llvm-svn: 353501
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
- The load store optimizer is currently merging multiple loads/stores into VLDM/VSTM with more than 16 doubleword registers
- This is an UNPREDICTABLE instruction and shouldn't be done
- It looks like the Limit for how many registers included in a merge got dropped at some point so I am reintroducing it in this patch
- This fixes https://bugs.llvm.org/show_bug.cgi?id=38389
Differential Revision: https://reviews.llvm.org/D52085
llvm-svn: 342872
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Because we create a new kind of debug instruction, DBG_LABEL, we need to
check all passes which use isDebugValue() to check MachineInstr is debug
instruction or not. When expelling debug instructions, we should expel
both DBG_VALUE and DBG_LABEL. So, I create a new function,
isDebugInstr(), in MachineInstr to check whether the MachineInstr is
debug instruction or not.
This patch has no new test case. I have run regression test and there is
no difference in regression test.
Differential Revision: https://reviews.llvm.org/D45342
Patch by Hsiangkai Wang.
llvm-svn: 331844
Summary:
r327219 added wrappers to std::sort which randomly shuffle the container before sorting.
This will help in uncovering non-determinism caused due to undefined sorting
order of objects having the same key.
To make use of that infrastructure we need to invoke llvm::sort instead of std::sort.
Note: This patch is one of a series of patches to replace *all* std::sort to llvm::sort.
Refer the comments section in D44363 for a list of all the required patches.
Reviewers: t.p.northover, RKSimon, MatzeB, bkramer
Reviewed By: bkramer
Subscribers: javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D44855
llvm-svn: 329329
As part of the unification of the debug format and the MIR format,
always print registers as lowercase.
* Only debug printing is affected. It now follows MIR.
Differential Revision: https://reviews.llvm.org/D40417
llvm-svn: 319187
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This header includes CodeGen headers, and is not, itself, included by
any Target headers, so move it into CodeGen to match the layering of its
implementation.
llvm-svn: 317647
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
LR is an untypical callee saved register in that it is restored into a
different register (PC) and thus does not live-out of the return block.
This case requires the `Restored` flag in CalleeSavedInfo to be cleared.
This fixes a number of cases where this wasn't handled correctly yet.
llvm-svn: 314471
ARMv4 doesn't support the "BX" instruction, which has been introduced
with ARMv4t. Adjust the call lowering and tail call implementation
accordingly.
Further changes are necessary to ensure that presence of the v4t feature
is correctly set. Most importantly, the "generic" CPU for thumb-*
triples should include ARMv4t, since thumb mode without thumb support
would naturally be pointless.
Add a couple of asserts to ensure thumb instructions are not emitted
without CPU support.
Differential Revision: https://reviews.llvm.org/D37030
llvm-svn: 311921
Summary:
ARMLoadStoreOpt::FixInvalidRegPairOp() was only checking if one of the
load destination registers to be split overlapped with the base register
if the base register was marked as killed. Since kill flags may not
always be present, this can lead to incorrect code.
This bug was exposed by my MachineCopyPropagation change D30751 breaking
the sanitizer-x86_64-linux-android buildbot.
Also clean up some dead code and add an assert that a register offset is
never encountered by this code, since it does not handle them correctly.
Reviewers: MatzeB, qcolombet, t.p.northover
Subscribers: aemerson, javed.absar, kristof.beyls, mcrosier, llvm-commits
Differential Revision: https://reviews.llvm.org/D37164
llvm-svn: 311907
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
This allows the optimization to rearrange loads and stores more
aggressively. This doesn't really affect performance, but it helps
codesize.
Differential Revision: https://reviews.llvm.org/D30839
llvm-svn: 298021
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation
as LastOp.
This patch fixes some cases where we would move stores to the wrong
insert point.
Re-commit with a fix to increment NumMove in the right place.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296815
Original commit message:
[ARM] Fix insert point for store rescheduling.
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
llvm-svn: 296718
In ARMPreAllocLoadStoreOpt::RescheduleOps, LastOp should be the last
operation which we want to merge. If we break out of the loop because
an operation has the wrong offset, we shouldn't use that operation as
LastOp.
This patch fixes some cases where we would sink stores for no reason.
Differential Revision: https://reviews.llvm.org/D30124
llvm-svn: 296708
This code starts from the high end of the sorted vector of offsets, and
works backwards: it tries to find contiguous offsets, process them, then
pops them from the end of the vector. Most of the code agrees with this
order of processing, but one loop doesn't: it instead processes elements
from the low end of the vector (which are nodes with unrelated offsets).
Fix that loop to process the correct elements.
This has a few implications. One, we don't incorrectly return early when
processing multiple groups of offsets in the same block (which allows
rescheduling prera-ldst-insertpt.mir). Two, we pick the correct insert
point for loads, so they're correctly sorted (which affects the
scheduling of vldm-liveness.ll). I think it might also impact some of
the heuristics slightly.
Differential Revision: https://reviews.llvm.org/D30368
llvm-svn: 296701
This prevents generating stm r1!, {r0, r1} on Thumb1, where value
stored for r1 is UNKONWN.
Patch by Zhaoshi Zheng.
Differential Revision: https://reviews.llvm.org/D27910
llvm-svn: 296538
Hunt down some of the places where we use bare addReg(0) or addImm(AL).addReg(0)
and replace with add(condCodeOp()) and add(predOps()). This should make it
easier to understand what those operands represent (without having to look at
the definition of the instruction that we're adding to).
Differential Revision: https://reviews.llvm.org/D27984
llvm-svn: 292587
For AddDefaultT1CC, we add a new helper t1CondCodeOp, which creates the
appropriate register operand. For AddNoT1CC, we use the existing condCodeOp
helper - we only had two uses of AddNoT1CC, so at this point it's probably not
worth having yet another helper just for them.
Differential Revision: https://reviews.llvm.org/D28603
llvm-svn: 291894
Rename from addOperand to just add, to match the other method that has been
added to MachineInstrBuilder for adding more than just 1 operand.
See https://reviews.llvm.org/D28057 for the whole discussion.
Differential Revision: https://reviews.llvm.org/D28556
llvm-svn: 291891
Replace all uses of AddDefaultPred with MachineInstrBuilder::add(predOps()).
This makes the code building MachineInstrs more readable, because it allows us
to write code like:
MIB.addSomeOperand(blah)
.add(predOps())
.addAnotherOperand(blahblah)
instead of
AddDefaultPred(MIB.addSomeOperand(blah))
.addAnotherOperand(blahblah)
This commit also adds the predOps helper in the ARM backend, as well as the add
method taking a variable number of operands to the MachineInstrBuilder.
The transformation has been done mostly automatically with a custom tool based
on Clang AST Matchers + RefactoringTool.
Differential Revision: https://reviews.llvm.org/D28555
llvm-svn: 291890
Stephan Herhut