Introducing a negative cache for ObjCLanguageRuntime::LookupInCompleteClassCache()
This helps speed up the (common) case of us looking for classes that are hidden deep within Cocoa internals and repeatedly failing at finding type information for them.
In order for this to work, we need to clean this cache whenever debug information is added. A new symbols loaded event is added that is triggered with add-dsym (before modules loaded would be triggered for both adding modules and adding symbols).
Interested parties can register for this event. Internally, we make sure to clean the negative cache whenever symbols are added.
Lastly, ClassDescriptor::IsTagged() has been refactored to GetTaggedPointerInfo() that also (optionally) returns info and value bits. In this way, data formatters can share tagged pointer code instead of duplicating the required arithmetic.
llvm-svn: 178897
from the current Target, if there is one, else back off to getting
the currently selected platform from the Debugger (as it ws doing
previously.)
Remove code from DynamicLoaderDarwinKernel that was setting the platform
in both the Target and in the Debugger.
llvm-svn: 178836
“process attach” should ask the same questions as process launch if there is a current process.
“process connect” then “process launch” or “process attach” should actually work.
<rdar://problem/13524210>
<rdar://problem/13524208>
<rdar://problem/13488919>
llvm-svn: 178324
- Includes a stub for AVX support in the x86-64 register context and a failing test for register sets that are unavailable.
Thanks to Greg Clayton for his review feedback.
llvm-svn: 178252
ValueObjects themselves use DumpValueObjectOptions as the currency for the same purpose
The code to convert between these two units was replicated (to varying degrees of correctness) in several spots in the code
This checkin provides one and only one (and hopefully correct :-) entry point for this conversion
llvm-svn: 178044
Make register read and write accept $<regname> as valid.
This allows:
(lldb) reg read rbx
rbx = 0x0000000000000000
(lldb) reg read $rbx
rbx = 0x0000000000000000
(lldb) reg write $rbx 1
(lldb) reg read $rbx
rbx = 0x0000000000000001
to function correctly
It is not done at the RegisterContext level because we should keep the internal API clean of this user-friendly behavior and name registers appropriately.
If this ends up being needed in more places we can reconsider.
llvm-svn: 177961
Ensure that option -Y also works for expression as it does for frame variable
Also, if the user passes an explicit format specifier when printing a variable, override the summary's decision to hide the value.
This is required for scenarios like this to work:
(lldb) p/x c
(Class) $0 = 0x0000000100adb7f8 NSObject
Previously this would say:
(lldb) p/x c
(Class) $0 = NSObject
ignoring the explicit format specifier
llvm-svn: 177893
Made the "--reverse" option to "source list" also be able to use the "--count". This helps us implement support for regexp source list command:
(lldb) l -10
Which gets turned into:
(lldb) source list --reverse --count 10
Also simplified the code that is used to track showing more source from the last file and line.
llvm-svn: 176961
Calculate "can branch" using the MC API's rather than our hand-rolled regex'es.
As extra credit, allow setting the disassembly flavor for x86 based architectures to intel or att.
<rdar://problem/11319574>
<rdar://problem/9329275>
llvm-svn: 176392
StackFrame assumes m_sc is additive, but m_sc can lose its target. So now the SymbolContext::Clear() method takes a bool that indicates if the target should be cleared. Modified all existing code to properly set the bool argument.
llvm-svn: 175953
The notion of Crossref command has long been forgotten, and there is nothing using CommandObjectCrossref in the current LLDB codebase
However, this was causing a conflict with process plugins and command aliases ending up in an infinite loop under situations such as:
(lldb) command alias monitor process plugin packet monitor
(lldb) process att -n Calendar
Process 28709 stopped
Executable module set to "/Applications/Calendar.app/Contents/MacOS/Calendar".
Architecture set to: x86_64-apple-macosx.
(lldb) command alias monitor process plugin packet monitor
This fixes the loop (and consequent crash) by disposing of Crossref commands and related code
llvm-svn: 175831
- generate-vers.pl has to be called by cmake to generate the version number
- parallel builds not yet supported; dependency on clang must be explicitly specified
Tested on Linux.
- Building on Mac will require code-signing logic to be implemented.
- Building on Windows will require OS-detection logic and some selective directory inclusion
Thanks to Carlo Kok (who originally prepared these CMakefiles for Windows) and Ben Langmuir
who ported them to Linux!
llvm-svn: 175795
(lldb) frame variable
without first launching the inferior, you get:
error: invalid frame
this is misleading and should probably hint that there is no process. Adding this flag makes sure that we get:
error: invalid process
The difference between eFlagRequiresProcess and eFlagProcessMustBeLaunched is an open question.
llvm-svn: 175702
hitting auto-continue signals while running a thread plan would cause us to lose control of the debug
session.
<rdar://problem/12993641>
llvm-svn: 174793
Make the message when you hit an crash while evaluating an expression a little clearer, and mention "thread return -x".
rdar://problem/13110464
llvm-svn: 174095
Replacing the address argument type with address-expression in cases where StringToAddress() is used, and hence an expression can be passed where previously only a numeric address was allowed
This makes the documentation more clear and helps users discover that they can truly pass in an expression in these situations.
llvm-svn: 173753
Providing a compact display mode for "po" to use where the convenience variable name and the pointer value are both hidden.
This is for convenience when dealing with ObjC instances where the description often gets it right and the debugger-provided information is not useful to most people.
If you need either of these, "expr" will still show them.
llvm-svn: 173748
Flush the process when symbols are loaded/unloaded manually. This was going on in:
- "target modules load" command
- SBTarget::SetSectionLoadAddress(...)
- SBTarget::ClearSectionLoadAddress(...)
- SBTarget::SetModuleLoadAddress(...)
- SBTarget::ClearModuleLoadAddress(...)
llvm-svn: 173745
Data formatters now cache themselves.
This commit provides a new formatter cache mechanism. Upon resolving a formatter (summary or synthetic), LLDB remembers the resolution for later faster retrieval.
Also moved the data formatters subsystem from the core to its own group and folder for easier management, and done some code reorganization.
The ObjC runtime v1 now returns a class name if asked for the dynamic type of an object. This is required for formatters caching to work with the v1 runtime.
Lastly, this commit disposes of the old hack where ValueObjects had to remember whether they were queried for formatters with their static or dynamic type.
Now the ValueObjectDynamicValue class works well enough that we can use its dynamic value setting for the same purpose.
llvm-svn: 173728
Major fixed to allow reading files that are over 4GB. The main problems were that the DataExtractor was using 32 bit offsets as a data cursor, and since we mmap all of our object files we could run into cases where if we had a very large core file that was over 4GB, we were running into the 4GB boundary.
So I defined a new "lldb::offset_t" which should be used for all file offsets.
After making this change, I enabled warnings for data loss and for enexpected implicit conversions temporarily and found a ton of things that I fixed.
Any functions that take an index internally, should use "size_t" for any indexes and also should return "size_t" for any sizes of collections.
llvm-svn: 173463
Providing a special mode of operator for "memory read -f c-str" which actually works in most common cases
Where the old behavior would provide:
(lldb) mem read --format s `foo`
0x100000f5d: NULL
Now we do:
(lldb) mem read --format s `foo`
0x100000f5d: "hello world"
You can also specify a count and that many strings will be showed starting at the initial address:
(lldb) mem read -c 2 -f c-str `foo`
0x100000f1d: "hello world"
0x100000f29: "short"
llvm-svn: 173076
If there is any alive process being debugged, the user is asked for confirmation before quitting LLDB
This should prevent situations where the user mistakenly types "q" and LLDB slaughters their process without any mercy whatsoever
Since it can quickly get tedious, there is a new setting on the command interpreter to disable this and replicate the previous behavior
llvm-svn: 172757
controlled by the --unwind-on-error flag, and --ignore-breakpoint which separately controls behavior when a called
function hits a breakpoint. For breakpoints, we don't unwind, we either stop, or ignore the breakpoint, which makes
more sense.
Also make both these behaviors globally settable through "settings set".
Also handle the case where a breakpoint command calls code that ends up re-hitting the breakpoint. We were recursing
and crashing. Now we just stop without calling the second command.
<rdar://problem/12986644>
<rdar://problem/9119325>
llvm-svn: 172503
Fixed an issue with the auto loading of script resources in debug info files. Any platform can add support for this, and on MacOSX we allow dSYM files to contain python modules that get automatically loaded when a dSYM file is associated with an executable or shared library.
The modifications will now:
- Let the module locate the symbol file naturally instead of using a function that only works in certain cases. This helps us to locate the script resources as long as the dSYM file can be found.
- Don't try and do any of this if the script interpreter has scripting disabled.
- Allow more than one scripting resource to be found in a symbol file by returning the list
- Load the scripting resources when a symbol file is added via the "target symbols add" command.
- Be smarter about matching the dSYM mach-o file to an existing executable in the target images by stripping extensions on the symfile basname if needed.
llvm-svn: 172275
Adding useful formatting options to the expression (expr) command.
As a side effect of this change, the -d option now supports the same three-values enumeration that frame variables uses (run, don't run, none) instead of a boolean like it did previously
These options do not apply to print, p or po because these are aliased to not take any options.
In order to use them, use expression or expr.
llvm-svn: 171993
enum
{
//----------------------------------------------------------------------
// eFlagRequiresTarget
//
// Ensures a valid target is contained in m_exe_ctx prior to executing
// the command. If a target doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidTargetDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidTargetDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresTarget = (1u << 0),
//----------------------------------------------------------------------
// eFlagRequiresProcess
//
// Ensures a valid process is contained in m_exe_ctx prior to executing
// the command. If a process doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidProcessDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidProcessDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresProcess = (1u << 1),
//----------------------------------------------------------------------
// eFlagRequiresThread
//
// Ensures a valid thread is contained in m_exe_ctx prior to executing
// the command. If a thread doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidThreadDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidThreadDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresThread = (1u << 2),
//----------------------------------------------------------------------
// eFlagRequiresFrame
//
// Ensures a valid frame is contained in m_exe_ctx prior to executing
// the command. If a frame doesn't exist or is invalid, the command
// will fail and CommandObject::GetInvalidFrameDescription() will be
// returned as the error. CommandObject subclasses can override the
// virtual function for GetInvalidFrameDescription() to provide custom
// strings when needed.
//----------------------------------------------------------------------
eFlagRequiresFrame = (1u << 3),
//----------------------------------------------------------------------
// eFlagRequiresRegContext
//
// Ensures a valid register context (from the selected frame if there
// is a frame in m_exe_ctx, or from the selected thread from m_exe_ctx)
// is availble from m_exe_ctx prior to executing the command. If a
// target doesn't exist or is invalid, the command will fail and
// CommandObject::GetInvalidRegContextDescription() will be returned as
// the error. CommandObject subclasses can override the virtual function
// for GetInvalidRegContextDescription() to provide custom strings when
// needed.
//----------------------------------------------------------------------
eFlagRequiresRegContext = (1u << 4),
//----------------------------------------------------------------------
// eFlagTryTargetAPILock
//
// Attempts to acquire the target lock if a target is selected in the
// command interpreter. If the command object fails to acquire the API
// lock, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagTryTargetAPILock = (1u << 5),
//----------------------------------------------------------------------
// eFlagProcessMustBeLaunched
//
// Verifies that there is a launched process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBeLaunched = (1u << 6),
//----------------------------------------------------------------------
// eFlagProcessMustBePaused
//
// Verifies that there is a paused process in m_exe_ctx, if there
// isn't, the command will fail with an appropriate error message.
//----------------------------------------------------------------------
eFlagProcessMustBePaused = (1u << 7)
};
Now each command object contains a "ExecutionContext m_exe_ctx;" member variable that gets initialized prior to running the command. The validity of the target objects in m_exe_ctx are checked to ensure that any target/process/thread/frame/reg context that are required are valid prior to executing the command. Each command object also contains a Mutex::Locker m_api_locker which gets used if eFlagTryTargetAPILock is set. This centralizes a lot of checking code that was previously and inconsistently implemented across many commands.
llvm-svn: 171990
last source point listed.
Also fix the setting of the default file & line to the file containing main, when you do a plain "list".
<rdar://problem/12685226>
llvm-svn: 171945
Jim Ingham