This adds new instructions used by the Branch Target Identification
feature. When this is enabled, these are the only instructions which can
be targeted by indirect branch instructions.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52485
llvm-svn: 343225
This adds some new system registers which can be used to restrict
certain types of speculative execution.
Patch by Pablo Barrio and David Spickett!
Differential revision: https://reviews.llvm.org/D52482
llvm-svn: 343218
This adds a new variant of the DC system instruction for persistent
memory.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52480
llvm-svn: 343216
This adds new system instructions which act as barriers to speculative
execution based on earlier execution within a particular execution
context.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52479
llvm-svn: 343214
Parsing of the system instructions (IC, DC, AT and TLBI) uses this
function to show the required architecture when the operand is valid,
but the architecture is not enabled. Armv8.5A adds a few different
system instructions as part of optional features, so we need to extend
it to show individual features, not just base architectures.
This is NFC for now, but will be used by three different features added
in v8.5A, and will be tested by them.
Patch by David Spickett!
Differential revision: https://reviews.llvm.org/D52478
llvm-svn: 343109
This caused the DebugInfo/Sparc/gnu-window-save.ll test to fail.
> Functions that have signed return addresses need additional dwarf support:
> - After signing the LR, and before authenticating it, the LR register is in a
> state the is unusable by a debugger or unwinder
> - To account for this a new directive, .cfi_negate_ra_state, is added
> - This directive says the signed state of the LR register has now changed,
> i.e. unsigned -> signed or signed -> unsigned
> - This directive has the same CFA code as the SPARC directive GNU_window_save
> (0x2d), adding a macro to account for multiply defined codes
> - This patch matches the gcc implementation of this support:
> https://patchwork.ozlabs.org/patch/800271/
>
> Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343103
This patch allows targeting Armv8.5-A, adding the architecture to
tablegen and setting the options to be identical to Armv8.4-A for the
time being. Subsequent patches will add support for the different
features included in the Armv8.5-A Reference Manual.
Patch by Pablo Barrio!
Differential revision: https://reviews.llvm.org/D52470
llvm-svn: 343102
Functions that have signed return addresses need additional dwarf support:
- After signing the LR, and before authenticating it, the LR register is in a
state the is unusable by a debugger or unwinder
- To account for this a new directive, .cfi_negate_ra_state, is added
- This directive says the signed state of the LR register has now changed,
i.e. unsigned -> signed or signed -> unsigned
- This directive has the same CFA code as the SPARC directive GNU_window_save
(0x2d), adding a macro to account for multiply defined codes
- This patch matches the gcc implementation of this support:
https://patchwork.ozlabs.org/patch/800271/
Differential Revision: https://reviews.llvm.org/D50136
llvm-svn: 343089
This tries to make use of evaluateAsRelocatable in AArch64AsmParser::classifySymbolRef
to parse more complex expressions as relocatable operands. It is hopefully better than
the existing code which only handles Symbol +- Constant.
This allows us to parse more complex adr/adrp, mov, ldr/str and add operands. It also
loosens the requirements on parsing addends in ld/st and mov's and adds a number of
tests.
Differential Revision: https://reviews.llvm.org/D51792
llvm-svn: 342455
This adds the plumbing for the Tiny code model for the AArch64 backend. This,
instead of loading addresses through the normal ADRP;ADD pair used in the Small
model, uses a single ADR. The 21 bit range of an ADR means that the code and
its statically defined symbols need to be within 1MB of each other.
This makes it mostly interesting for embedded applications where we want to fit
as much as we can in as small a space as possible.
Differential Revision: https://reviews.llvm.org/D49673
llvm-svn: 340397
Contrary to ELF, we don't add any markers that distinguish data generated
with .long from normal instructions, so the .inst directive only adds
compatibility with assembly that uses it.
Differential Revision: https://reviews.llvm.org/D49935
llvm-svn: 338355
This patch adds predicated and unpredicated MOVPRFX instructions, which
can be prepended to SVE instructions that are destructive on their first
source operand, to make them a constructive operation, e.g.
add z1.s, p0/m, z1.s, z2.s <=> z1 = z1 + z2
can be made constructive:
movprfx z0, z1
add z0.s, p0/m, z0.s, z2.s <=> z0 = z1 + z2
The predicated MOVPRFX instruction can additionally be used to zero
inactive elements, e.g.
movprfx z0.s, p0/z, z1.s
add z0.s, p0/m, z0.s, z2.s
Not all instructions can be prefixed with the MOVPRFX instruction
which is why this patch also adds a mechanism to validate prefixed
instructions. The exact rules when a MOVPRFX applies is detailed in
the SVE supplement of the Architectural Reference Manual.
This is patch [1/2] in a series to add MOVPRFX instructions:
- Patch [1/2]: https://reviews.llvm.org/D49592
- Patch [2/2]: https://reviews.llvm.org/D49593
Reviewers: rengolin, SjoerdMeijer, samparker, fhahn, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D49592
llvm-svn: 338258
This adds MC support for the crypto instructions that were made optional
extensions in Armv8.2-A (AArch64 only).
Differential Revision: https://reviews.llvm.org/D49370
llvm-svn: 338010
SVE overloads the AArch64 PSTATE condition flags and introduces
a set of condition code aliases for the assembler. The
details are described in section 2.2 of the architecture
reference manual supplement for SVE.
In short:
SVE alias => AArch64 name
--------------------------
NONE => EQ
ANY => NE
NLAST => HS
LAST => LO
FIRST => MI
NFRST => PL
PMORE => HI
PLAST => LS
TCONT => GE
TSTOP => LT
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48869
llvm-svn: 336245
Unpredicated FP-multiply of SVE vector with a vector-element given by
vector[index], for example:
fmul z0.s, z1.s, z2.s[0]
which performs an unpredicated FP-multiply of all 32-bit elements in
'z1' with the first element from 'z2'.
This patch adds restricted register classes for SVE vectors:
ZPR_3b (only z0..z7 are allowed) - for indexed vector of 16/32-bit elements.
ZPR_4b (only z0..z15 are allowed) - for indexed vector of 64-bit elements.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48823
llvm-svn: 336205
This adds the following system registers:
- RAS registers,
- MPAM registers,
- Activitiy monitor registers,
- Trace Extension registers,
- Timing insensitivity of data processing instructions,
- Enhanced Support for Nested Virtualization.
Differential Revision: https://reviews.llvm.org/D48871
llvm-svn: 336193
These patches were previously reverted as they led to
buildbot time-outs caused by large switch statement in
printAliasInstr when using UBSan and O3. The issue has
been addressed with a workaround (r335525).
llvm-svn: 336079
This patch uses the DiagnosticPredicate for SVE predicate patterns
to improve their diagnostics, now giving a 'invalid operand' diagnostic
if the type is not an immediate or one of the expected pattern
labels.
Reviewers: samparker, SjoerdMeijer, javed.absar, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D48220
llvm-svn: 334983
The variants added by this patch are:
- SQINC signed increment, e.g. sqinc x0, w0, all, mul #4
- SQDEC signed decrement, e.g. sqdec x0, w0, all, mul #4
- UQINC unsigned increment, e.g. uqinc w0, all, mul #4
- UQDEC unsigned decrement, e.g. uqdec w0, all, mul #4
This patch includes asmparser changes to parse a GPR64 as a GPR32 in
order to satisfy the constraint check:
x0 == GPR64(w0)
in:
sqinc x0, w0, all, mul #4
^___^ (must match)
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47716
llvm-svn: 334980
Increment/decrement scalar register by (scaled) element count given by
predicate pattern, e.g. 'incw x0, all, mul #4'.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47713
llvm-svn: 334838
Some instructions require of a limited set of FP immediates as operands,
for example '#0.5 or #1.0' for SVE's FADD instruction.
This patch adds support for parsing and printing such FP immediates as
exact values (e.g. #0.499999 is not accepted for #0.5).
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47711
llvm-svn: 334826
For immediates used in DUP instructions that have the range
-128 to 127, or a multiple of 256 in the range -32768 to 32512,
one could argue that when the result element size is 16bits (.h),
the value can be considered both signed and unsigned.
Reviewers: rengolin, fhahn, SjoerdMeijer, samparker, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47619
llvm-svn: 333873
Print the first indexed element as a FP register, for example:
mov z0.d, z1.d[0]
Is now printed as:
mov z0.d, d1
Next to printing, this patch also adds aliases to parse 'mov z0.d, d1'.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47571
llvm-svn: 333872
Unpredicated copy of indexed SVE element to SVE vector,
along with MOV-aliases.
For example:
dup z0.h, z1.h[0]
duplicates the first 16-bit element from z1 to all elements in
the result vector z0.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D47570
llvm-svn: 333871
Floating point immediate combining a negative sign and
a hexadecimal number, e.g. #-0x0 caused the compiler to crash.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: javed.absar
Differential Revision: https://reviews.llvm.org/D47483
llvm-svn: 333524
This patch adds addsub_imm8_opt_lsl_(i8|i16|i32|i64) operands
that are unsigned values in the range 0 to 255. For element widths of
16 bits or higher it may also be a signed multiple of 256 in the
range 0 to 65280.
Note: This also does some refactoring to reuse convenience function
getShiftedVal<shift>(), and now allows AArch64 scalar 'ADD #-4096' to be
accepted to be mapped to SUB #4096.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47310
llvm-svn: 333408
Unpredicated copy of optionally-shifted immediate to SVE vector,
along with MOV-aliases.
This patch contains parsing and printing support for
cpy_imm8_opt_lsl_(i8|i16|i32|i64). This operand allows a signed value in
the range -128 to +127. For element widths of 16 bits or higher it may
also be a signed multiple of 256 in the range -32768 to +32512.
For element-width of 8 bits a range of -128 to 255 is accepted, since a copy
of a byte can be considered either signed/unsigned.
Note: This patch renames tryParseAddSubImm() -> tryParseImmWithOptionalShift()
and moves the behaviour of trying to shift a plain immediate by an allowed
shift-value to its addImmWithOptionalShiftOperands() method, so that the
parsing itself is generic and allows immediates from multiple shifted operands.
This is done because an immediate can be divisible by both shifted operands.
Reviewers: rengolin, fhahn, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D47309
llvm-svn: 333263
The AArch64 asm parser currently has custom parsing logic for .hword, .word,
and .xword. Rather than use this custom logic, we can just use
addAliasForDirective to enable the reuse of AsmParser::parseDirectiveValue.
Differential Revision: https://reviews.llvm.org/D47000
llvm-svn: 333077
For regular SVE vector operands, this patch introduces a more
sensible diagnostic when the vector has a wrong suffix (e.g. z0.s vs z0.b).
For example:
add z0.s, z1.s, z2.b -> invalid element width
^_____^
mismatch
For the vector-with-shift/extend (e.g. z0.s, uxtw #2) this patch takes
a slightly different approach and instead returns a 'invalid operand'
if the element size is not as expected. This is because the diagnostics
are more specificied to suggest using the right shift/extend suffix. This
is a trade-off not to introduce more operand classes and still provide
useful diagnostics for LD1 and PRF instructions.
For example:
ld1w z1.s, p0/z, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw)'
ld1w z1.d, p0/z, [x0, z0.s] -> invalid operand
^________________^
mismatch
For gather prefetches, both 'z0.s' and 'z0.d' would be allowed:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].s, (uxtw|sxtw) #2'
prfw #0, p0, [x0, z0.d] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Without this change, the diagnostic would unnecessarily suggest a
different element size:
prfw #0, p0, [x0, z0.s] -> invalid shift/extend specified, expected 'z[0..31].d, (lsl|uxtw|sxtw) #2'
Reviewers: SjoerdMeijer, aemerson, fhahn, samparker, javed.absar
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D46688
llvm-svn: 332483
This patch extends the 'isSVEVectorRegWithShiftExtend' function to
improve diagnostics for SVE's gather load (scalar + vector) addressing
modes. Instead of always suggesting the 'unscaled' addressing mode,
the use of DiagnosticPredicate enables a more specific error message
in the context where the scaling is incorrect. For example:
ld1h z0.d, p0/z, [x0, z0.d, lsl #2]
^
shift amount should be '1'
Instead of suggesting the packed, unscaled addressing mode:
expected 'z[0..31].d, (uxtw|sxtw)'
the assembler now suggests using the proper scaling:
expected 'z[0..31].d, (lsl|uxtw|sxtw) #1'
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D46124
llvm-svn: 331162
Most of the add<operandname>Operands() functions are the same
and can be replaced by using a single 'RenderMethod' in
the AArch64InstrFormats.td file. Since many of the scaled
immediates (with different scaling/bits) are the same, most of
these can reuse the same AsmOperandClass.
Reviewers: fhahn, rengolin, samparker, SjoerdMeijer, javed.absar
Reviewed By: samparker
Differential Revision: https://reviews.llvm.org/D46122
llvm-svn: 331146
This patch extends the PredicateMethod of AsmOperands used in SVE's
LD1 instructions with a DiagnosticPredicate. This makes them 'context
sensitive' to the operand that has been parsed and tells the user to
use the right register (with expected shift/extend), rather than telling
the immediate is out of range when it actually parsed a register.
Patch [2/2] in a series to improve assembler diagnostics for SVE:
- Patch [1/2]: https://reviews.llvm.org/D45879
- Patch [2/2]: https://reviews.llvm.org/D45880
Reviewers: olista01, stoklund, craig.topper, mcrosier, rengolin, echristo, fhahn, SjoerdMeijer, evandro, javed.absar
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D45880
llvm-svn: 330934
Summary:
In some cases the shift/extend needs to be explicitly parsed together
with the register, rather than as a separate operand. This is needed
for addressing modes where the instruction as a whole dictates the
scaling/extend, rather than specific bits in the instruction.
By parsing them as a single operand, we avoid the need to pass an
extra operand in all CodeGen patterns (because all operands need to
have an associated value), and we avoid the need to update TableGen to
accept operands that have no associated bits in the instruction.
An added benefit of parsing them together is that the assembler
can give a sensible diagnostic if the scaling is not correct.
This is patch [2/4] in a series to add assembler/disassembler support for
SVE's contiguous LD1 (scalar+scalar) instructions:
- Patch [1/4]: https://reviews.llvm.org/D45687
- Patch [2/4]: https://reviews.llvm.org/D45688
- Patch [3/4]: https://reviews.llvm.org/D45689
- Patch [4/4]: https://reviews.llvm.org/D45690
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: fhahn, SjoerdMeijer
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45688
llvm-svn: 330394
Summary:
- Renamed tryParseRegister to tryParseScalarRegister, which
now returns an OperandMatchResultTy.
- Moved matching of certain aliases into matchRegisterNameAlias.
- Changed type of most 'Reg' variables to 'unsigned'.
This is patch [1/4] in a series to add assembler/disassembler support for
SVE's contiguous LD1 (scalar+scalar) instructions:
- Patch [1/4]: https://reviews.llvm.org/D45687
- Patch [2/4]: https://reviews.llvm.org/D45688
- Patch [3/4]: https://reviews.llvm.org/D45689
- Patch [4/4]: https://reviews.llvm.org/D45690
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro, samparker
Reviewed By: samparker
Subscribers: samparker, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45687
llvm-svn: 330311
Summary:
Added instructions for contiguous stores, ST1, with scalar+imm addressing
modes and corresponding tests. The patch also adds parsing of
'mul vl' as needed for the VL-scaled immediate.
This is patch [6/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45432
llvm-svn: 330014
Summary:
Added Z_(b|h|s|d) vector list RegisterOperands along with support to
add/print the vector lists.
This is patch [5/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: fhahn
Subscribers: tschuett, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45431
llvm-svn: 330000
Summary:
Merged 'addVectorList64Operands' and 'addVectorList128Operands' into a
generic 'addVectorListOperands', which can be easily extended to work
for SVE vectors.
This is patch [4/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45430
llvm-svn: 329909
Summary:
Added 'RegisterKind' to the VectorListOp structure, so that this operand
type can be reused for SVE vector lists in a later patch. It also
refactors the 'tryParseVectorList' function so it can be used directly
in the ParserMethod of an operand. The parsing can now parse multiple
kinds of vectors and recover if there is no match.
This is patch [3/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45429
llvm-svn: 329900
Summary:
Place parsing of a vector index into a separate function to reduce
duplication, since the code is duplicated in both the parsing of a
Neon vector register operand and a Neon vector list.
This is patch [2/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: rengolin
Subscribers: kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D45428
llvm-svn: 329809
Summary:
Merged 'tryMatchVectorRegister' (specific to Neon) and
'tryParseSVERegister' into a single 'tryParseVectorRegister' function, and
created a generic 'parseVectorKind()' function that returns the #Elements
and ElementWidth of a vector suffix. This reduces the duplication of
this functionality between two the vector implementations.
This is patch [1/6] in a series to add assembler/disassembler support for
SVE's contiguous ST1 (scalar+imm) instructions.
Reviewers: fhahn, rengolin, javed.absar, huntergr, SjoerdMeijer, t.p.northover, echristo, evandro
Reviewed By: fhahn
Subscribers: tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D45427
llvm-svn: 329782
Much like any written register in load/store instructions, the status register
is not allowed to overlap with any others. So diagnose it like we already do
with the other cases.
llvm-svn: 329687
Summary:
All variants of isLogicalImm[Not](32|64) can be combined into a single templated function, same for printLogicalImm(32|64).
By making it use a template instead, further SVE patches can use it for other data types as well (e.g. 8, 16 bits).
Reviewers: fhahn, rengolin, aadg, echristo, kristof.beyls, samparker
Reviewed By: samparker
Subscribers: aemerson, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D42294
llvm-svn: 323646
Summary:
This patch adds support for parsing/printing of named or unnamed
patterns that are used in SVE's PTRUE instruction, amongst others.
The pattern can be specified as a named pattern to initialize the predicate
vector or it can be specified as an immediate in the range 0-31.
Reviewers: fhahn, rengolin, evandro, mcrosier, t.p.northover
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, tschuett, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41818
llvm-svn: 323098
Summary:
This extends TableGen's AsmMatcherEmitter with code that generates
a table with tied-operand constraints. The constraints are checked
when parsing the instruction. If an operand is not equal to its tied operand,
the assembler will give an error.
Patch [2/3] in a series to add operand constraint checks for SVE's predicated ADD/SUB.
Reviewers: olista01, rengolin, mcrosier, fhahn, craig.topper, evandro, echristo
Reviewed By: fhahn
Subscribers: javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D41446
llvm-svn: 322166
Fixed issue that was found on sanitizer-x86_64-linux-fast.
I changed the result type of 'Parser.getTok().getString().lower()'
in AArch64AsmParser::tryParseSVEPredicateVector() from 'StringRef' to
'auto', since StringRef::lower() returns a std::string.
llvm-svn: 322092
Summary:
Parsing of the '/m' (merging) or '/z' (zeroing) suffix of a predicate operand.
Patch [2/3] in a series to add predicated ADD/SUB instructions for SVE.
Reviewers: rengolin, mcrosier, evandro, fhahn, echristo, MatzeB, t.p.northover
Reviewed By: fhahn
Subscribers: t.p.northover, MatzeB, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D41442
llvm-svn: 322070
Summary:
Add a register class for SVE predicate operands that can only be p0-p7 (as opposed to p0-p15)
Patch [1/3] in a series to add predicated ADD/SUB instructions for SVE.
Reviewers: rengolin, mcrosier, evandro, fhahn, echristo, olista01, SjoerdMeijer, javed.absar
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, tschuett, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D41441
llvm-svn: 321699
Summary:
isReg() in AArch64AsmParser.cpp is a bit of a misnomer, and would be better named 'isScalarReg()' instead.
Patch [1/3] in a series to add operand constraint checks for SVE's predicated ADD/SUB.
Reviewers: rengolin, mcrosier, evandro, fhahn, echristo
Reviewed By: fhahn
Subscribers: aemerson, javed.absar, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D41445
llvm-svn: 321646
This patch resubmits the SVE ZIP1/ZIP2 patch series consisting of
of r320992, r320986, r320973, and r320970 by reverting
https://reviews.llvm.org/rL321024.
The issue that caused r321024 has been addressed in https://reviews.llvm.org/rL321158,
so this patch-series should be safe to resubmit.
llvm-svn: 321163
This reverts changes r320992, r320986, r320973, and r320970.
r320970 by itself breaks the test case, and the rest depend on it.
Test case will land soon.
llvm-svn: 321024
Summary: Patch [4/4] in a series to add parsing of predicates and properly parse SVE ZIP1/ZIP2 instructions. This patch further improves diagnostic messages for when the SVE feature is not specified.
Reviewers: rengolin, fhahn, olista01, echristo, efriedma
Reviewed By: fhahn
Subscribers: sdardis, aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D40363
llvm-svn: 320992
For Cylone, the instruction "movi.2d vD, #0" is executed incorrectly in some rare
circumstances. Work around the issue conservatively by avoiding the instruction entirely.
This patch changes CodeGen so that problematic instructions are never
generated, and the AsmParser so that an equivalent instruction is used (with a
warning).
llvm-svn: 320965
Summary:
Prevent an issue where a diagnostic is reported multiple times by bailing out with a ParseFail if an invalid SVE register element qualifier/suffix is specified, for example:
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
...
<stdin>:10:18: error: invalid sve vector kind qualifier
add z20.h, z2.h, z31.x
^
Reviewers: fhahn, rengolin
Reviewed By: rengolin
Subscribers: aemerson, javed.absar, tschuett, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D39894
llvm-svn: 318297
Patch [3/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
To summarise, this patch adds:
* SVE register definitions
* Methods to parse SVE register operands
* Methods to print SVE register operands
* RegKind SVEDataVector to distinguish it from other data types like scalar register or Neon vector.
* k_SVEDataRegister and SVEDataRegOp to describe SVE registers (which will be extended by further patches with e.g. ElementWidth and the shift-extend type).
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39089
llvm-svn: 317590
Patch [2/5] in a series to add assembler/disassembler support for AArch64 SVE unpredicated ADD/SUB instructions.
This change is a non functional change that adds RegKind as an alternative to 'isVector' to prepare it for newer types (SVE data vectors and predicate vectors) that will be added in next patches (where the SVE data vector is added as part of this patch set)
Patch by Sander De Smalen.
Reviewed by: rengolin
Differential Revision: https://reviews.llvm.org/D39088
llvm-svn: 317569
This adds debug tracing to the table-generated assembly instruction matcher,
enabled by the -debug-only=asm-matcher option.
The changes in the target AsmParsers are to add an MCInstrInfo reference under
a consistent name, so that we can use it from table-generated code. This was
already being used this way for targets that use deprecation warnings, but 5
targets did not have it, and Hexagon had it under a different name to the other
backends.
llvm-svn: 315445
New instructions are added to AArch32 and AArch64 to aid
floating-point multiplication and addition of complex numbers,
where the complex numbers are packed in a vector register as a
pair of elements. The Imaginary part of the number is placed in the
more significant element, and the Real part of the number is placed
in the less significant element.
Differential Revision: https://reviews.llvm.org/D36792
llvm-svn: 312228
Add assembler and disassembler support for the ARMv8.3-A pointer
authentication instructions.
Differential Revision: https://reviews.llvm.org/D36517
llvm-svn: 310709
Summary:
Using c++11 enum classes ensures that only valid enum values are used
for ArchKind, ProfileKind, VersionKind and ISAKind. This removes the
need for checks that the provided values map to a proper enum value,
allows us to get rid of AK_LAST and prevents comparing values from
different enums. It also removes a bunch of static_cast
from unsigned to enum values and vice versa, at the cost of introducing
static casts to access AArch64ARCHNames and ARMARCHNames by ArchKind.
FPUKind and ArchExtKind are the only remaining old-style enum in
TargetParser.h. I think it's beneficial to keep ArchExtKind as old-style
enum, but FPUKind can be converted too, but this patch is quite big, so
could do this in a follow-up patch. I could also split this patch up a
bit, if people would prefer that.
Reviewers: rengolin, javed.absar, chandlerc, rovka
Reviewed By: rovka
Subscribers: aemerson, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D35882
llvm-svn: 309287
The AsmParser mnemonic spell checker was introduced in r307148 and enabled only
for ARM. This patch enables it for AArch64.
Differential Revision: https://reviews.llvm.org/D35357
llvm-svn: 307918
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Oliver Stannard