Summary:
Making `Scale` a `TypeSize` in AArch64InstrInfo::getMemOpInfo,
has the effect that all places where this information is used
(notably, TargetInstrInfo::getMemOperandWithOffset) will need
to consider Scale - and derived, Offset - possibly being scalable.
This patch adds a new operand `bool &OffsetIsScalable` to
TargetInstrInfo::getMemOperandWithOffset and fixes up all
the places where this function is used, to consider the
offset possibly being scalable.
In most cases, this means bailing out because the algorithm does not
(or cannot) support scalable offsets in places where it does some
form of alias checking for example.
Reviewers: rovka, efriedma, kristof.beyls
Reviewed By: efriedma
Subscribers: wuzish, kerbowa, MatzeB, arsenm, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, javed.absar, asb, rbar, johnrusso, simoncook, sabuasal, niosHD, jrtc27, MaskRay, zzheng, edward-jones, rogfer01, MartinMosbeck, brucehoult, the_o, PkmX, jocewei, jsji, Jim, lenary, s.egerton, pzheng, sameer.abuasal, apazos, luismarques, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72758
We are using countPopulation on a LaneBitmask to determine
a number of registers it covers. This is the assumption which
does not necessarily need to be true. It is not changed but
factored into a single call SIRegisterInfo::getNumCoveredRegs().
Some other places are cleaned up with respect to assumptions
about subreg indexes values and tablegen behavior.
Differential Revision: https://reviews.llvm.org/D74177
SIMachineScheduler uses isHighLatencyInstruction with the same
sematincs, but TargetInstrInfo has virtual isHighLatencyDef
method, so override it instead.
Added FLAT to the list of high latency opcodes and a check for
mayLoad since stores are not technically high latency in terms
of data dependency.
This change did not produce any visible impact on our tests.
Differential Revision: https://reviews.llvm.org/D73582
The generic BaseMemOpClusterMutation calls into TargetInstrInfo to
analyze the address of each load/store instruction, and again to decide
whether two instructions should be clustered. Previously this had to
represent each address as a single base operand plus a constant byte
offset. This patch extends it to support any number of base operands.
The old target hook getMemOperandWithOffset is now a convenience
function for callers that are only prepared to handle a single base
operand. It calls the new more general target hook
getMemOperandsWithOffset.
The only requirements for the base operands returned by
getMemOperandsWithOffset are:
- they can be sorted by MemOpInfo::Compare, such that clusterable ops
get sorted next to each other, and
- shouldClusterMemOps knows what they mean.
One simple follow-on is to enable clustering of AMDGPU FLAT instructions
with both vaddr and saddr (base register + offset register). I've left
a FIXME in the code for this case.
Differential Revision: https://reviews.llvm.org/D71655
In GlobalISel we may in some unfortunate circumstances generate PHIs with
operands that are on separate banks. If-conversion doesn't currently check for
that case and ends up generating a CSEL on AArch64 with incorrect register
operands.
Differential Revision: https://reviews.llvm.org/D72961
We do not have InstrItinerary so generic getInstLatency() was always
defaulting to return 1 cycle. We need to use TargetSchedModel instead
to compute an instruction's latency.
Differential Revision: https://reviews.llvm.org/D72655
This reverts the AMDGPU DAG mutation implemented in D72487 and gives
a more general way of adjusting BUNDLE operand latency.
It also replaces FixBundleLatencyMutation with adjustSchedDependency
callback in the AMDGPU, fixing not only successor latencies but
predecessors' as well.
Differential Revision: https://reviews.llvm.org/D72535
These opcodes use indirect register addressing so they need special handling by codegen (currently missing).
Reviewers: vpykhtin, arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D70400
readlane and writelane instructions are not allowed to use m0 as the
data operand, so spilling them is tricky and would require an
intermediate SGPR to spill it. Constrain the virtual register class in
this caes to disallow the inline spiller from folding the m0 operand
directly into the spill instruction.
I copied this hack from AArch64 which has the same problem for $sp.
We handle it this way for some other address spaces.
Since r349196, SILoadStoreOptimizer has been trying to do this. This
is after SIFoldOperands runs, which can change the addressing
patterns. It's simpler to just split this earlier.
llvm-svn: 375366
MachineInstr.h included AliasAnalysis.h, which includes a world of IR
constructs mostly unneeded in CodeGen. Prune it. Same for
DebugInfoMetadata.h.
Noticed with -ftime-trace.
llvm-svn: 375311
We define mov/update dpp intrinsics as overloaded but do not
support i64, which is a practically useful type. Fix the
selection and lowering.
Differential Revision: https://reviews.llvm.org/D68673
llvm-svn: 374910
Neither the base implementation of findCommutedOpIndices nor any in-tree target modifies the instruction passed in and there is no reason why they would in the future.
Committed on behalf of @hvdijk (Harald van Dijk)
Differential Revision: https://reviews.llvm.org/D66138
llvm-svn: 372882
SGPR spills aren't really handled after SILowerSGPRSpills. In order to
directly control what happens if the scavenger needs to spill, the
scavenger needs to be used directly. There is an alternative to
spilling in these contexts anyway since the frame register can be
increment and restored.
This does present another possible issue if spilling is needed for the
unused carry out if an add is needed. I think this can be avoided by
using a scalar add (although that clobbers SCC, which happens anyway).
llvm-svn: 370281
Now that the patterns use the new PatFrag address space support, the
only blocker to importing most load patterns is the addressing mode
complex patterns.
llvm-svn: 366237
Summary:
r363675 changed the exec modification helper function, now called
execMayBeModifiedBeforeUse, so that if no UseMI is specified it checks
all instructions in the basic block, even beyond the last use. That
meant that the DPP combiner no longer worked in any basic block that
ended with a control flow instruction, and in particular it didn't work
on code sequences generated by the atomic optimizer.
Fix it by reinstating the old behaviour but in a new helper function
execMayBeModifiedBeforeAnyUse, and limiting the number of instructions
scanned.
Reviewers: arsenm, vpykhtin
Subscribers: kzhuravl, nemanjai, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, kbarton, MaskRay, jfb, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64393
llvm-svn: 365910
This matters for byval uses outside of the entry block, which appear
as copies.
Previously, the only folding done was during selection, which could
not see the underlying frame index. For any uses outside the entry
block, the frame index was materialized in the entry block relative to
the global scratch wave offset.
This may produce worse code in cases where the offset ends up not
fitting in the MUBUF offset field. A better heuristic would be helpfu
for extreme frames.
llvm-svn: 364185
Invert the name and return value to better reflect the imprecise
nature.
Force passing in the DefMI, since it's known in the 2 users and could
possibly fail for an arbitrary vreg.
Allow specifying a specific user instruction. Scan through use
instructions, instead of use operands. Add scan thresholds instead of
searching infinitely.
Stop using a set to track seen uses. I didn't understand this usage,
or why it would not check the last use. I don't think the use list has
any particular order.
llvm-svn: 363675
Summary:
The basic idea here is to make it possible to use
MachineInstr::mayAlias also when the MachineInstr
is const (or the "Other" MachineInstr is const).
The addition of const in MachineInstr::mayAlias
then rippled down to the need for adding const
in several other places, such as
TargetTransformInfo::getMemOperandWithOffset.
Reviewers: hfinkel
Reviewed By: hfinkel
Subscribers: hfinkel, MatzeB, arsenm, jvesely, nhaehnle, hiraditya, javed.absar, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D60856
llvm-svn: 358744
Summary:
- During the fixing of SGPR copying from VGPR, ensure users of SCC is
properly propagated, i.e.
* only propagate through live def of SCC,
* skip the SCC-def inst itself, and
* stop the propagation on the other SCC-def inst after checking its
SCC-use first.
Subscribers: arsenm, kzhuravl, jvesely, wdng, nhaehnle, yaxunl, dstuttard, tpr, t-tye, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D59362
llvm-svn: 356258
Differential revision: https://reviews.llvm.org/D55444
dpp move with uses and old reg initializer should be in the same BB.
bound_ctrl:0 is only considered when bank_mask and row_mask are fully enabled (0xF). Otherwise the old register value is checked for identity.
Added add, subrev, and, or instructions to the old folding function.
Kill flag is cleared for the src0 (DPP register) as it may be copied into more than one user.
The pass is still disabled by default.
llvm-svn: 353513
I found a really strange WWM issue through a very convoluted shader that
essentially boils down to a bug in SIInstrInfo where canReadVGPR did not
correctly identify that WWM is like a copy and can have a VGPR as its
source.
Differential Revision: https://reviews.llvm.org/D56002
llvm-svn: 352500
Fixes two problems with GCNHazardRecognizer:
1. It only scans up to 5 instructions emitted earlier.
2. It does not take control flow into account. An earlier instruction
from the previous basic block is not necessarily a predecessor.
At the same time a real predecessor block is not scanned.
The patch provides a way to distinguish between scheduler and
hazard recognizer mode. It is OK to work with emitted instructions
in the scheduler because we do not really know what will be emitted
later and its order. However, when pass works as a hazard recognizer
the schedule is already finalized, and we have full access to the
instructions for the whole function, so we can properly traverse
predecessors and their instructions.
Differential Revision: https://reviews.llvm.org/D56923
llvm-svn: 351759
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
Fixed issue with identity values and other cases, f32/f16 identity values to be added later. fma/mac instructions is disabled for now.
Test is fully reworked, added comments. Other fixes:
1. dpp move with uses and old reg initializer should be in the same BB.
2. bound_ctrl:0 is only considered when bank_mask and row_mask are fully enabled (0xF). Othervise the old register value is checked for identity.
3. Added add, subrev, and, or instructions to the old folding function.
4. Kill flag is cleared for the src0 (DPP register) as it may be copied into more than one user.
Differential revision: https://reviews.llvm.org/D55444
llvm-svn: 350721
Matt Arsenault