Summary: These were templated due to SelectionDAG using int masks for shuffles and IR using unsigned masks for shuffles. But now that D72467 has landed we have an int mask version of IRBuilder::CreateShuffleVector. So just use int instead of a template
Reviewers: spatel, efriedma, RKSimon
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Differential Revision: https://reviews.llvm.org/D77183
We have some long-standing missing shuffle optimizations that could
use this transform via VectorCombine now:
https://bugs.llvm.org/show_bug.cgi?id=35454
(and we still don't get that case in the backend either)
This function is apparently templated because there's existing code
in IR that treats mask values as unsigned and backend code that
treats masks values as signed.
The mask values are not endian-dependent (as shown by the existing
bitcast transform from DAGCombiner).
Differential Revision: https://reviews.llvm.org/D76508
We currently only ever use this for lowering constant uniform values (shift/rotate by immediate) so we can safely enable it by default (it treats the undef bits as zero when extracting constants).
This is necessary for an upcoming patch that will use SimplifyDemandedBits more aggressively on funnel shift amounts and causes regressions in vXi64 constant without it.
For i32 and i64 cases, X86ISD::SHLD/SHRD are close enough to ISD::FSHL/FSHR that we can use them directly, we just need to account for the operand commutation for SHRD.
The i16 SHLD/SHRD case is annoying as the shift amount is modulo-32 (vs funnel shift modulo-16), so I've added X86ISD::FSHL/FSHR equivalents, which matches the generic implementation in all other terms.
Something I'm slightly concerned with is that ISD::FSHL/FSHR legality is controlled by the Subtarget.isSHLDSlow() feature flag - we don't normally use non-ISA features for this but it allows the DAG combines to continue to operate after legalization in a lot more cases.
The X86 *bits.ll changes are all affected by the same issue - we now have a "FSHR(-1,-1,amt) -> ROTR(-1,amt) -> (-1)" simplification that reduces the dependencies enough for the branch fall through code to mess up.
Differential Revision: https://reviews.llvm.org/D75748
Previously this code was called into two ways, either a FrameIndexSDNode
was passed in StackSlot. Or a load node was passed in the argument
called StackSlot. This was determined by a dyn_cast to FrameIndexSDNode.
In the case of a load, we had to go find the real pointer from
operand 0 and cast the node to MemSDNode to find the pointer info.
For the stack slot case, the code assumed that the stack slot
was perfectly aligned despite not being the creator of the slot.
This commit modifies the interface to make the caller responsible
for passing all of the required information to avoid all the
guess work and reverse engineering.
I'm not aware of any issues with the original code after an
earlier commit to fix the alignment of one of the stack objects.
This is just clean up to make the code less surprising.
Leave the gather/scatter subclasses, but make them inherit from
MemIntrinsicSDNode and delete their constructor and destructor.
This way we can still have the getIndex, getMask, etc. convenience
functions.
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
Both of those functions only have a single caller starting
at LowerSETCC. Just handle floating point directly in LowerSETCC.
This removes the need to pass Chain and IsSignaling all the way
down.
The isNegatibleForFree/getNegatedExpression methods currently rely on a raw char value to indicate whether a negation is beneficial or not.
This patch replaces the char return value with an NegatibleCost enum to more clearly demonstrate what is implied.
It also renames isNegatibleForFree to getNegatibleCost to more accurately reflect whats going on.
Differential Revision: https://reviews.llvm.org/D74221
This adds a strict version of FP16_TO_FP and FP_TO_FP16 and uses
them to implement soft promotion for the half type. This is
enough to provide basic support for __fp16 with strictfp.
Add the necessary X86 support to use VCVTPS2PH/VCVTPH2PS when F16C
is enabled.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with proper LiveIn
declaration, better option handling and more portable testing.
Differential Revision: https://reviews.llvm.org/D68720
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with better option
handling and more portable testing
Differential Revision: https://reviews.llvm.org/D68720
This hasn't been used for years, its original implementation, D35700, had bugs that caused the reversion of most of the code, and since then x86 shuffle lowering/combining has handled most cases and can deal with the rest as well.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
This a recommit of 39f50da2a3 with correct option
flags set.
Differential Revision: https://reviews.llvm.org/D68720
This reverts commit 39f50da2a3.
The -fstack-clash-protection is being passed to the linker too, which
is not intended.
Reverting and fixing that in a later commit.
Implement protection against the stack clash attack [0] through inline stack
probing.
Probe stack allocation every PAGE_SIZE during frame lowering or dynamic
allocation to make sure the page guard, if any, is touched when touching the
stack, in a similar manner to GCC[1].
This extends the existing `probe-stack' mechanism with a special value `inline-asm'.
Technically the former uses function call before stack allocation while this
patch provides inlined stack probes and chunk allocation.
Only implemented for x86.
[0] https://www.qualys.com/2017/06/19/stack-clash/stack-clash.txt
[1] https://gcc.gnu.org/ml/gcc-patches/2017-07/msg00556.html
Differential Revision: https://reviews.llvm.org/D68720
If we don't have cmov, X87 compares write to FPSW and we need to
move the bits to EFLAGS to use as JCC/SETCC/CMOV conditions.
Previously this was done by calling ConvertCmpIfNecessary in
multiple places which would emit the extra code for the FNSTSW,
a shift, a truncate, and a SAHF instructions. Isel would then
select trunc+X86ISD::CMP to a FUCOM instruction that produces FPSW.
This patch centralizes all of the handling into a single custom
isel handler. This allows us to remove ConvertCmpIfNecessary and
a couple target specific ISD opcodes.
Differential Revision: https://reviews.llvm.org/D73863
lrint/llrint are defined as rounding using the current rounding
mode. Numbers that can't be converted raise FE_INVALID and an
implementation defined value is returned. They may also write to
errno.
I believe this means we can use cvtss2si/cvtsd2si or fist to
convert as long as -fno-math-errno is passed on the command line.
Clang will leave them as libcalls if errno is enabled so they
won't become ISD::LRINT/LLRINT in SelectionDAG.
For 64-bit results on a 32-bit target we can't use cvtss2si/cvtsd2si
but we can use fist since it can write to a 64-bit memory location.
Though maybe we could consider using vcvtps2qq/vcvtpd2qq on avx512dq
targets?
gcc also does this optimization.
I think we might be able to do this with STRICT_LRINT/LLRINT as
well, but I've left that for future work.
Differential Revision: https://reviews.llvm.org/D73859
The CATCHPAD node mostly existed to be selected into the EH_RESTORE
instruction, which sets the frame back up when 32-bit Windows exceptions
return to the parent function. However, creating this MachineInstr early
increases the risk that other passes will come along and insert
instructions that use the stack before ESP and EBP are restored. That
happened in PR44697.
Instead of representing these in the instruction stream early, delay it
until PEI. Mark the blocks where this needs to happen as EHPads, but not
funclet entry blocks. Passes after PEI have to be careful not to hoist
instructions that can use stack across frame setup instructions, so this
should be relatively reliable.
Fixes PR44697
Reviewed By: hans
Differential Revision: https://reviews.llvm.org/D73752
This is based on this llvm-dev thread http://lists.llvm.org/pipermail/llvm-dev/2019-December/137521.html
The current strategy for f16 is to promote type to float every except where the specific width is required like loads, stores, and bitcasts. This results in rounding occurring in odd places instead of immediately after arithmetic operations. This interacts in weird ways with the __fp16 type in clang which is a storage only type where arithmetic is always promoted to float. InstCombine can remove some fpext/fptruncs around such arithmetic and turn it into arithmetic on half. This wouldn't be so bad if SelectionDAG was able to put those fpext/fpround back in when it promotes.
It is also not obvious how to handle to make the existing strategy work with STRICT fp. We need to use STRICT versions of the conversions which require chain operands. But if the conversions are created for a bitcast, there is no place to get an appropriate chain from.
This patch implements a different strategy where conversions are emitted directly around arithmetic operations. And otherwise its passed around as an i16 including in arguments and return values. This can result in more conversions between arithmetic operations, but is closer to matching the IR the frontend generates for __fp16. And it will allow us to use the chain from constrained arithmetic nodes to link the STRICT_FP_TO_FP16/STRICT_FP16_TO_FP that will need to be added. I've set it up so that each target can opt into the new behavior. Converting all the targets myself was more than I was able to handle.
Differential Revision: https://reviews.llvm.org/D73749
Summary: This is a first step before changing the types to llvm::Align and introduce functions to ease client code.
Reviewers: courbet
Subscribers: arsenm, sdardis, nemanjai, jvesely, nhaehnle, hiraditya, kbarton, jrtc27, atanasyan, jsji, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73785
Summary: X86 has instructions to calculate fma and fneg at the same time. But we combine the fneg and fma only when fneg is the source operand under strict FP.
Reviewers: craig.topper, andrew.w.kaylor, uweigand, RKSimon, LiuChen3
Subscribers: LuoYuanke, llvm-commits, cfe-commits, jdoerfert, hiraditya
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72824
Summary:
I think whatever problem the gluing was fixing has long since been fixed. We don't have any of the restrictions on FP stack stuff that existed back when this was first added.
I had to change which type we use for FILD in BuildFILD when X86 was enabled because most of the isel patterns block f32/f64 instructions when SSE1/SSE2 are enabled. So I needed to use the f80 pattern, but this shouldn't have an effect the generated code since there is only one FILD instruction anyway. We already use f80 explicitly in other other places.
Reviewers: RKSimon, spatel
Reviewed By: RKSimon
Subscribers: andrew.w.kaylor, scanon, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D72805
This is another part of a problem noted in PR42024:
https://bugs.llvm.org/show_bug.cgi?id=42024
The AVX2 code may use awkward 256-bit shuffles vs. the AVX code that gets split
into the expected 128-bit unpack instructions. We have to be selective in
matching the types where we try to do this though. Otherwise, we can end up
with more instructions (in the case of v8x32/v4x64).
Differential Revision: https://reviews.llvm.org/D72575
Only PPC seems to be using it, and only checks some simple cases and
doesn't distinguish between FP. Just switch to using LLT to simplify
use from GlobalISel.
The NoFPExcept bit in SDNodeFlags currently defaults to true, unlike all
other such flags. This is a problem, because it implies that all code that
transforms SDNodes without copying flags can introduce a correctness bug,
not just a missed optimization.
This patch changes the default to false. This makes it necessary to move
setting the (No)FPExcept flag for constrained intrinsics from the
visitConstrainedIntrinsic routine to the generic visit routine at the
place where the other flags are set, or else the intersectFlagsWith
call would erase the NoFPExcept flag again.
In order to avoid making non-strict FP code worse, whenever
SelectionDAGISel::SelectCodeCommon matches on a set of orignal nodes
none of which can raise FP exceptions, it will preserve this property
on all results nodes generated, by setting the NoFPExcept flag on
those result nodes that would otherwise be considered as raising
an FP exception.
To check whether or not an SD node should be considered as raising
an FP exception, the following logic applies:
- For machine nodes, check the mayRaiseFPException property of
the underlying MI instruction
- For regular nodes, check isStrictFPOpcode
- For target nodes, check a newly introduced isTargetStrictFPOpcode
The latter is implemented by reserving a range of target opcodes,
similarly to how memory opcodes are identified. (Note that there a
bit of a quirk in identifying target nodes that are both memory nodes
and strict FP nodes. To simplify the logic, right now all target memory
nodes are automatically also considered strict FP nodes -- this could
be fixed by adding one more range.)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71841
This allows us to delete InlineAsm::Constraint_i workarounds in
SelectionDAGISel::SelectInlineAsmMemoryOperand overrides and
TargetLowering::getInlineAsmMemConstraint overrides.
They were introduced to X86 in r237517 to prevent crashes for
constraints like "=*imr". They were later copied to other targets.
The only thing its getting from the X86TargetLowering class is
the subtarget which we can easily pass. This function only has
one call site now since this might help the compiler inline it.
Explicitly return both the flag result and the chain result for
STRICT_FCMP nodes. This removes an assumption in the caller that
getValue(1) is the right way to get the chain.
This is an alternate fix for the bug discussed in D70595.
This also includes minimal tests for other in-tree targets
to show the problem more generally.
We check the number of uses as a predicate for whether some
value is free to negate, but that use count can change as we
rewrite the expression in getNegatedExpression(). So something
that was marked free to negate during the cost evaluation
phase becomes not free to negate during the rewrite phase (or
the inverse - something that was not free becomes free).
This can lead to a crash/assert because we expect that
everything in an expression that is negatible to be handled
in the corresponding code within getNegatedExpression().
This patch skips the use check during the rewrite phase.
So we determine that some expression isNegatibleForFree
(identically to without this patch), but during the rewrite,
don't rely on use counts to decide how to create the optimal
expression.
Differential Revision: https://reviews.llvm.org/D70975
Craig Topper