bitcast (shuf V, MaskC) --> shuf (bitcast V), MaskC'
This is the widen shuffle elements enhancement to D76727.
It builds on the analysis and simplifications in
D77881 and rG6a7e958a423e.
The phase ordering tests show that we can simplify inverse
shuffles across a binop in both directions (widen/narrow or
narrow/widen) now.
There's another potential transform visible in some of the
remaining TODOs - move a bitcasted operand of a shuffle
after the shuffle.
Differential Revision: https://reviews.llvm.org/D78371
First-order recurrences require special treatment when they are live-out;
such treatment is provided by fixFirstOrderRecurrence(), so they should be
included in AllowedExit set.
(Should probably have been included originally in D16197.)
Fixes PR45526: AllowedExit set is used by prepareToFoldTailByMasking() to
check whether the treatment for live-outs also holds when folding the tail,
which is not (yet) the case for first-order recurrences.
Differential Revision: https://reviews.llvm.org/D78210
Cost-modeling decisions are tied to the compute interleave groups
(widening decisions, scalar and uniform values). When invalidating the
interleave groups, those decisions also need to be invalidated.
Otherwise there is a mis-match during VPlan construction.
VPWidenMemoryRecipes created initially are left around w/o converting them
into VPInterleave recipes. Such a conversion indeed should not take place,
and these gather/scatter recipes may in fact be right. The crux is leaving around
obsolete CM_Interleave (and dependent) markings of instructions along with
their costs, instead of recalculating decisions, costs, and recipes.
Alternatively to forcing a complete recompute later on, we could try
to selectively invalidate the decisions connected to the interleave
groups. But we would likely need to run the uniform/scalar value
detection parts again anyways and the extra complexity is probably not
worth it.
Fixes PR45572.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D78298
After introducing VPWidenSelectRecipe, the duplicated logic can be
shared.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D77973
Handling LoadInst and StoreInst in tryToWiden seems a bit
counter-intuitive, as there is only an assertion for them and in no
case VPWidenRefipes are created for them.
I think it makes sense to move the assertion to handleReplication, where
the non-widened loads and store are handled.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D77972
Fix an assert introduced in 41ed5d856c1: a phi with a single predecessor and a
mask is a valid case which is already supported by the code.
Differential Revision: https://reviews.llvm.org/D78115
Summary:
Currently, the internal options -vectorize-loops, -vectorize-slp, and
-interleave-loops do not have much practical effect. This is because
they are used to initialize the corresponding flags in the pass
managers, and those flags are then unconditionally overwritten when
compiling via clang or via LTO from the linkers. The only exception was
-vectorize-loops via opt because of some special hackery there.
While vectorization could still be disabled when compiling via clang,
using -fno-[slp-]vectorize, this meant that there was no way to disable
it when compiling in LTO mode via the linkers. This only affected
ThinLTO, since for regular LTO vectorization is done during the compile
step for scalability reasons. For ThinLTO it is invoked in the LTO
backends. See also the discussion on PR45434.
This patch makes it so the internal options can actually be used to
disable these optimizations. Ultimately, the best long term solution is
to mark the loops with metadata (similar to the approach used to fix
-fno-unroll-loops in D77058), but this enables a shorter term
workaround, and actually makes these internal options useful.
I constant propagated the initial values of these internal flags into
the pass manager flags (for some reasons vectorize-loops and
interleave-loops were initialized to true, while vectorize-slp was
initialized to false). As mentioned above, they are overwritten
unconditionally so this doesn't have any real impact, and these initial
values aren't particularly meaningful.
I then changed the passes to check the internl values and return without
performing the associated optimization when false (I changed the default
of -vectorize-slp to true so the options behave similarly). I was able
to remove the hackery in opt used to get -vectorize-loops=false to work,
as well as a special option there used to disable SLP vectorization.
Finally, I changed thinlto-slp-vectorize-pm.c to:
a) Only test SLP (moved the loop vectorization checking to a new test).
b) Use code that is slp vectorized when it is enabled, and check that
instead of whether the pass is enabled.
c) Test the new behavior of -vectorize-slp.
d) Test both pass managers.
The loop vectorization (and associated interleaving) testing I moved to
a new thinlto-loop-vectorize-pm.c test, with several changes:
a) Changed the flags on the interleaving testing so that it will
actually interleave, and check that.
b) Test the new behavior of -vectorize-loops and -interleave-loops.
c) Test both pass managers.
Reviewers: fhahn, wmi
Subscribers: hiraditya, steven_wu, dexonsmith, cfe-commits, davezarzycki, llvm-commits
Tags: #clang
Differential Revision: https://reviews.llvm.org/D77989
Summary:
Remove usages of asserting vector getters in Type in preparation for the
VectorType refactor. The existence of these functions complicates the
refactor while adding little value.
Reviewers: rriddle, sdesmalen, efriedma
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D77259
Pass from the calling recipe the interleave group itself instead of passing the
group's insertion position and having the function query CM for its interleave
group and making sure that given instruction is the insertion point of.
Differential Revision: https://reviews.llvm.org/D78002
Widening a selects depends on whether the condition is loop invariant or
not. Rather than checking during codegen-time, the information can be
recorded at the VPlan construction time.
This was suggested as part of D76992, to reduce the reliance on
accessing the original underlying IR values.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D77869
As proposed in D77881, we'll have the related widening operation,
so this name becomes too vague.
While here, change the function signature to take an 'int' rather
than 'size_t' for the scaling factor, add an assert for overflow of
32-bits, and improve the documentation comments.
Default visibility for classes is private, so the private: at the top of
various class definitions is redundant.
Reviewers: gilr, rengolin, Ayal, hsaito
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D77810
InnerLoopVectorizer's code called during VPlan execution still relies on
original IR's def-use relations to decide which vector code to generate,
limiting VPlan transformations ability to modify def-use relations and still
have ILV generate the vector code.
This commit introduces VPValues for VPBlendRecipe to use as the values to
blend. The recipe is generated with VPValues wrapping the phi's incoming values
of the scalar phi. This reduces ingredient def-use usage by ILV as a step
towards full VPlan-based def-use relations.
Differential Revision: https://reviews.llvm.org/D77539
Introduce a new VPWidenCanonicalIVRecipe to generate a canonical vector
induction for use in fold-tail-with-masking, if a primary induction is absent.
The canonical scalar IV having start = 0 and step = VF*UF, created during code
-gen to control the vector loop, is widened into a canonical vector IV having
start = {<Part*VF, Part*VF+1, ..., Part*VF+VF-1> for 0 <= Part < UF} and
step = <VF*UF, VF*UF, ..., VF*UF>.
Differential Revision: https://reviews.llvm.org/D77635
When building a VPlan, BasicBlock::instructionsWithoutDebug() is used to
iterate over the instructions in a block. This means that no recipes
should be created for debug info intrinsics already and we can turn the
early exit into an assertion.
Reviewers: Ayal, gilr, rengolin, aprantl
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D77636
This patch adds VPValue versions for the arguments of the call to
VPWidenCallRecipe and uses them during code-generation.
Similar to D76373 this reduces ingredient def-use usage by ILV as
a step towards full VPlan-based def-use relations.
Reviewers: Ayal, gilr, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D77655
Now that we have scalable vectors, there's a distinction that isn't
getting captured in the original SequentialType: some vectors don't have
a known element count, so counting the number of elements doesn't make
sense.
In some cases, there's a better way to express the commonality using
other methods. If we're dealing with GEPs, there's GEP methods; if we're
dealing with a ConstantDataSequential, we can query its element type
directly.
In the relatively few remaining cases, I just decided to write out
the type checks. We're talking about relatively few places, and I think
the abstraction doesn't really carry its weight. (See thread "[RFC]
Refactor class hierarchy of VectorType in the IR" on llvmdev.)
Differential Revision: https://reviews.llvm.org/D75661
This patch moves calls to their own recipe, to simplify the transition
to VPUser for operands of VPWidenRecipe, as discussed in D76992.
Subsequently additional information can be added to the recipe rather
than computing it during the execute step.
Reviewers: rengolin, Ayal, gilr, hsaito
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D77467
After 49d00824bb, VPWidenRecipe only stores a single instruction.
tryToWiden can simply return the widen recipe, like other helpers in
VPRecipeBuilder.
Extracting to the same index that we are going to insert back into
allows forming select ("blend") shuffles and enables further transforms.
Admittedly, this is a quick-fix for a more general problem that I'm
hoping to solve by adding transforms for patterns that start with an
insertelement.
But this might resolve some regressions known to be caused by the
extract-extract transform (although I have not gotten more details on
those yet).
In the motivating case from PR34724:
https://bugs.llvm.org/show_bug.cgi?id=34724
The combination of subsequent instcombine and codegen transforms gets us this improvement:
vmovshdup %xmm0, %xmm2 ## xmm2 = xmm0[1,1,3,3]
vhaddps %xmm1, %xmm1, %xmm4
vmovshdup %xmm1, %xmm3 ## xmm3 = xmm1[1,1,3,3]
vaddps %xmm0, %xmm2, %xmm0
vaddps %xmm1, %xmm3, %xmm1
vshufps $200, %xmm4, %xmm0, %xmm0 ## xmm0 = xmm0[0,2],xmm4[0,3]
vinsertps $177, %xmm1, %xmm0, %xmm0 ## xmm0 = zero,xmm0[1,2],xmm1[2]
-->
vmovshdup %xmm0, %xmm2 ## xmm2 = xmm0[1,1,3,3]
vhaddps %xmm1, %xmm1, %xmm1
vaddps %xmm0, %xmm2, %xmm0
vshufps $200, %xmm1, %xmm0, %xmm0 ## xmm0 = xmm0[0,2],xmm1[0,3]
Differential Revision: https://reviews.llvm.org/D76623
bitcast (shuf V, MaskC) --> shuf (bitcast V), MaskC'
We do not attempt this in InstCombine because we do not want to change
types and create new shuffle ops that are potentially not lowered as
well as the original code. Here, we can check the cost model to see if
it is worthwhile.
I've aggressively enabled this transform even if the types are the same
size and/or equal cost because moving the bitcast allows InstCombine to
make further simplifications.
In the motivating cases from PR35454:
https://bugs.llvm.org/show_bug.cgi?id=35454
...this is enough to let instcombine and the backend eliminate the
redundant shuffles, but we probably want to extend VectorCombine to
handle the inverse pattern (shuffle-of-bitcast) to get that
simplification directly in IR.
Differential Revision: https://reviews.llvm.org/D76727
Instead, represent the mask as out-of-line data in the instruction. This
should be more efficient in the places that currently use
getShuffleVector(), and paves the way for further changes to add new
shuffles for scalable vectors.
This doesn't change the syntax in textual IR. And I don't currently plan
to change the bitcode encoding in this patch, although we'll probably
need to do something once we extend shufflevector for scalable types.
I expect that once this is finished, we can then replace the raw "mask"
with something more appropriate for scalable vectors. Not sure exactly
what this looks like at the moment, but there are a few different ways
we could handle it. Maybe we could try to describe specific shuffles.
Or maybe we could define it in terms of a function to convert a fixed-length
array into an appropriate scalable vector, using a "step", or something
like that.
Differential Revision: https://reviews.llvm.org/D72467
In InnerLoopVectorizer::getOrCreateTripCount, when the backedge taken
count is a SCEV add expression, its type is defined by the type of the
last operand of the add expression.
In the test case from PR45259, this last operand happens to be a
pointer, which (according to llvm::Type) does not have a primitive size
in bits. In this case, LoopVectorize fails to truncate the SCEV and
crashes as a result.
Uing ScalarEvolution::getTypeSizeInBits makes the truncation work as expected.
https://bugs.llvm.org/show_bug.cgi?id=45259
Differential Revision: https://reviews.llvm.org/D76669
This patch changes VPWidenRecipe to only store a single original IR
instruction. This is the first required step towards modeling it's
operands as VPValues and also towards breaking it up into a
VPInstruction.
Discussed as part of D74695.
Reviewers: Ayal, gilr, rengolin
Reviewed By: gilr
Differential Revision: https://reviews.llvm.org/D76988
This untangles the logic in widenIntOrFpInduction in order to make more
explicit and visible how exactly the induction variable is lowered.
Differential Revision: https://reviews.llvm.org/D76686
InnerLoopVectorizer's code called during VPlan execution still relies on
original IR's def-use relations to decide which vector code to generate,
limiting VPlan transformations ability to modify def-use relations and still
have ILV generate the vector code.
This commit introduces a VPValue for VPWidenMemoryInstructionRecipe to use as
the stored value. The recipe is generated with a VPValue wrapping the stored
value of the scalar store. This reduces ingredient def-use usage by ILV as a
step towards full VPlan-based def-use relations.
Differential Revision: https://reviews.llvm.org/D76373
We need to insert into the Visited set at the same time we insert
into the worklist. Otherwise we may end up pushing the same
instruction to the worklist multiple times, and only adding it to
the visited set later.
The latest improvements to VPValue printing make this mapping clear when
printing the operand. Printing the mapping separately is not required
any longer.
Reviewers: rengolin, hsaito, Ayal, gilr
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D76375
Now that printing VPValues uses the underlying IR value name, if
available, recording the underlying value here improves printing.
Reviewers: rengolin, hsaito, Ayal, gilr
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D76374
The existence of the class is more confusing than helpful, I think; the
commonality is mostly just "GEP is legal", which can be queried using
APIs on GetElementPtrInst.
Differential Revision: https://reviews.llvm.org/D75660
When the an underlying value is available, we can use its name for
printing, as discussed in D73078.
Reviewers: rengolin, hsaito, Ayal, gilr
Reviewed By: Ayal
Differential Revision: https://reviews.llvm.org/D76200
Summary:
SLPVectorizer try to vectorize list of scalar instructions of the same type,
instructions already vectorized are rejected through isValidElementType().
Without this patch, tryToVectorizeList() will first try to determine vectorization
factor of a list of Instructions before checking whether each instruction has unsupported
type or not. For instructions already vectorized for SVE, it will crash at getVectorElementSize(),
where it try to return a fixed size.
This patch make sure invalid element types are rejected before trying to get vectorization
factor. This make sure we are not trying to vectorize instructions already vectorized.
Reviewers: sdesmalen, efriedma, spatel, RKSimon, ABataev, apazos, rengolin
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76017
Summary:
Support ConstantInt::get() and Constant::getAllOnesValue() for scalable
vector type, this requires ConstantVector::getSplat() to take in 'ElementCount',
instead of 'unsigned' number of element count.
This change is needed for D73753.
Reviewers: sdesmalen, efriedma, apazos, spatel, huntergr, willlovett
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74386
Refines the gather/scatter cost model, but also changes the TTI
function getIntrinsicInstrCost to accept an additional parameter
which is needed for the gather/scatter cost evaluation.
This did require trivial changes in some non-ARM backends to
adopt the new parameter.
Extending gathers and truncating scatters are now priced cheaper.
Differential Revision: https://reviews.llvm.org/D75525
It seems like the SLPVectorizer is currently not aware of vector
versions of functions provided by libraries like Accelerate [1].
This patch updates SLPVectorizer to use the same infrastructure
the LoopVectorizer uses to detect vectorizable library functions.
For calls, it computes the cost of an intrinsic call (existing behavior)
and the cost of a vector function library call, if available. Like
LoopVectorizer, it assumes the cost of the vector function is simply the
cost of a call to a vector function.
[1] https://developer.apple.com/documentation/accelerate
Reviewers: ABataev, RKSimon, spatel
Reviewed By: ABataev
Differential Revision: https://reviews.llvm.org/D75878
opcode (extelt V0, Ext0), (ext V1, Ext1) --> extelt (opcode (splat V0, Ext0), V1), Ext1
The first part of this patch generalizes the cost calculation to accept
different extraction indexes. The second part creates a shuffle+extract
before feeding into the existing code to create a vector op+extract.
The patch conservatively uses "TargetTransformInfo::SK_PermuteSingleSrc"
rather than "TargetTransformInfo::SK_Broadcast" (splat specifically
from element 0) because we do not have a more general "SK_Splat"
currently. That does not affect any of the current regression tests,
but we might be able to find some cost model target specialization where
that comes into play.
I suspect that we can expose some missing x86 horizontal op codegen with
this transform, so I'm speculatively adding a debug flag to disable the
binop variant of this transform to allow easier testing.
The test changes show that we're sensitive to cost model diffs (as we
should be), so that means that patches like D74976
should have better coverage.
Differential Revision: https://reviews.llvm.org/D75689
Sanjay Patel