This addes extra patterns for the VMLAS MVE instruction, which performs
Qda = Qda * Qn + Rm, a similar pattern to the existing VMLA. The sinking
of splat(Rm) into the loop is already performed, meaning we just need
extra Pat's in tablegen.
Differential Revision: https://reviews.llvm.org/D75115
Add ELF relocations for the following fixups:
fixup_thumb_adr_pcrel_10 -> R_ARM_THM_PC8
fixup_thumb_cp -> R_ARM_THM_PC8
fixup_t2_adr_pcrel_12 -> R_ARM_THM_PREL_11_0
fixup_t2_ldst_pcrel_12 -> R_ARM_THM_PC12
While these relocations are short-ranged there is support in the open
source ELF linker's in binutils and soon to be in LLD. MC will no longer
resolve pc-relative fixups to global symbols due to interpositioning
concerns. We can handle these at link time by implementing the relocations.
The R_ARM_THM_PC8 has some extra encoding rules for addends that llvm-mc
sidesteps by not supporting addends for these instructions, using the wide
Thumb 2 instruction if it is available. I think that this is a reasonable
compromise given that these are rare.
This partiall reverts D72892, the Thumb fixups no longer need to be
evaluated at assembly time.
Differential Revision: https://reviews.llvm.org/D75039
Ensure that we're recording implicit defs, as well as visiting implicit
uses and implicit defs when we're walking through operands.
Differential Revision: https://reviews.llvm.org/D75185
Support the explicit wide assembler qualifier for the dmb/dsb/isb synchronization barrier instructions.
Differential revision: https://reviews.llvm.org/D75143
Under fp16 we optimise the bitcast between a VMOVhr and a CopyToReg via
custom lowering. This rewrites that to be a DAG combine instead, which
helps produce better code in the cases where the bitcast is actaully
legal.
Differential Revision: https://reviews.llvm.org/D72753
MC currently does not emit these relocation types, and lld does not
handle them. Add FKF_Constant as a work-around of some ARM code after
D72197. Eventually we probably should implement these relocation types.
By Fangrui Song!
Differential revision: https://reviews.llvm.org/D72892
Summary:
This commit adds the predicated MVE intrinsics for the same set of
unary operations that I added in their unpredicated forms in
* D74333 (vrint)
* D74334 (vrev)
* D74335 (vclz, vcls)
* D74336 (vmovl)
* D74337 (vmovn)
but since the predicated versions are a lot more similar to each
other, I've kept them all together in a single big patch. Everything
here is done in the standard way we've been doing other predicated
operations: an IR intrinsic called `@llvm.arm.mve.foo.predicated` and
some isel rules that match that alongside whatever they accept for the
unpredicated version of the same instruction.
In order to write the isel rules conveniently, I've refactored the
existing isel rules for the affected instructions into multiclasses
parametrised by a vector-type class, in the usual way. All those
refactorings are intended to leave the existing isel rules unchanged:
the only difference should be that new ones for the predicated
intrinsics are introduced.
The only tiny infrastructure change I needed in this commit was to
change the implementation of `IntrinsicMX` in `arm_mve_defs.td` so
that the records it defines are anonymous rather than named (and use
`NameOverride` to set the output intrinsic name), which allows me to
call it twice in two multiclasses with the same `NAME` without a
tablegen-time error.
Reviewers: dmgreen, MarkMurrayARM, miyuki, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75165
Add getUniqueReachingMIDef to RDA which performs a global search for
a machine instruction that produces a unique definition of a given
register at a given point. Also add two helper functions
(getMIOperand) that wrap around this functionality to get the
incoming definition uses of a given instruction. These now replace
the uses of getReachingMIDef in ARMLowOverheadLoops. getReachingMIDef
has been renamed to getReachingLocalMIDef and has been made private
along with getInstFromId.
Differential Revision: https://reviews.llvm.org/D74605
Fixed an issue exposed by D74006.
In clang cc1as, MCContext::UseNamesOnTempLabels is true.
When parsing a .fnstart directive, FnStart gets redefined to a temporary symbol of a different name (.Ltmp0, .Ltmp1, ...).
MCContext::getELFSection() called by SwitchToEHSection() will create a different .ARM.exidx each time.
llvm-mc uses `Ctx.setUseNamesOnTempLabels(false);` and FnStart is unnamed.
MCContext::getELFSection() called by SwitchToEHSection() will reuse the same .ARM.exidx .
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D75095
This node reads the rounding control which means it needs to be ordered properly with operations that change the rounding control. So it needs to be chained to maintain order.
This patch adds a chain input and output to the node and connects it to the chain in SelectionDAGBuilder. I've update all in-tree targets to connect their chain through their lowering code.
Differential Revision: https://reviews.llvm.org/D75132
Summary:
Future patches will make use of TTI to perform cost-model-driven `SCEVExpander::isHighCostExpansionHelper()`
This is a fully NFC patch to make things reviewable.
Reviewers: reames, mkazantsev, wmi, sanjoy
Reviewed By: mkazantsev
Subscribers: hiraditya, zzheng, javed.absar, dmgreen, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73704
This adds infrastructure to print and parse MIR MachineOperand comments.
The motivation for the ARM backend is to print condition code names instead of
magic constants that are difficult to read (for human beings). For example,
instead of this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14, $noreg
t2Bcc %bb.4, 0, killed $cpsr
we now print this:
dead renamable $r2, $cpsr = tEOR killed renamable $r2, renamable $r1, 14 /* CC::always */, $noreg
t2Bcc %bb.4, 0 /* CC:eq */, killed $cpsr
This shows that MachineOperand comments are enclosed between /* and */. In this
example, the EOR instruction is not conditionally executed (i.e. it is "always
executed"), which is encoded by the 14 immediate machine operand. Thus, now
this machine operand has /* CC::always */ as a comment. The 0 on the next
conditional branch instruction represents the equal condition code, thus now
this operand has /* CC:eq */ as a comment.
As it is a comment, the MI lexer/parser completely ignores it. The benefit is
that this keeps the change in the lexer extremely minimal and no target
specific parsing needs to be done. The changes on the MIPrinter side are also
minimal, as there is only one target hooks that is used to create the machine
operand comments.
Differential Revision: https://reviews.llvm.org/D74306
Change the way that we remove the redundant iteration count code in
the presence of IT blocks. collectLocalKilledOperands has been
introduced to scan an instructions operands, collecting the killed
instructions and then visiting them too. This is used to delete the
code in the preheader which calculates the iteration count. We also
track any IT blocks within the preheader and, if we remove all the
instructions from the IT block, we also remove the IT instruction.
isSafeToRemove is used to remove any redundant uses of the iteration
count within the loop body.
Differential Revision: https://reviews.llvm.org/D74975
This moves all the logic of converting LLVM Triples to
MachO::CPU_(SUB_)TYPE from the specific target (Target)AsmBackend to
more convenient functions in lib/BinaryFormat.
This also gets rid of the separate two X86AsmBackend classes.
The previous attempt was to add it to libObject, but that adds an
unnecessary dependency to libObject from all the targets.
Differential Revision: https://reviews.llvm.org/D74808
The code at https://reviews.llvm.org/D74808 has broken builds that are
configured with -DBUILD_SHARED_LIBS=On.
This patch adds the correct library dependencies.
This moves all the logic of converting LLVM Triples to
MachO::CPU_(SUB_)TYPE from the specific target (Target)AsmBackend to
more convenient functions in libObject.
This also gets rid of the separate two X86AsmBackend classes.
Differential Revision: https://reviews.llvm.org/D74808
Summary:
This patch adds two families of ACLE intrinsics: vqdmullbq and
vqdmulltq (including vector-vector and vector-scalar variants) and the
corresponding LLVM IR intrinsics llvm.arm.mve.vqdmull and
llvm.arm.mve.vqdmull.predicated.
Reviewers: simon_tatham, MarkMurrayARM, dmgreen, ostannard
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74845
Summary:
Some predicated MVE intrinsics return a vector with element size
different from the input vector element size. In this case the
predicate must type correspond to the output vector type.
The following intrinsics use the incorrect predicate type:
* llvm.arm.mve.mull.int.predicated
* llvm.arm.mve.mull.poly.predicated
* llvm.arm.mve.vshll.imm.predicated
This patch fixes the issue.
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: MarkMurrayARM
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74838
Check that no Q-regs are live out of the loop, unless the instruction
within the loop is predicated on the vctp.
Differential Revision: https://reviews.llvm.org/D72713
Similar to VADDV and VADDLV that have been added recently, this adds
lowering and patterns for VMLAV, VMLAVA, VMLALV and VMLALVA. They
perform the same roles as the add's, just folding a mul into the same
instruction (and so taking two inputs). As such, they need to be lowered
in the same way as the types are often not legal.
Differential Revision: https://reviews.llvm.org/D74390
Following on from the extra VADDV lowering, this extends things to
handle VADDLV which allows summing values into a pair of i32 registers,
together treated as a i64. This needs to be done in DAGCombine too as
the types are otherwise illegal, which is a fairly simple addition on
top of the existing code.
There is also a VADDLVA instruction handled here, that adds the incoming
values from the two general purpose registers. As opposed to the
non-long version where we could just add patterns for add(x, VADDV), the
long version needs to handle this early before the i64 has being split
into too many pieces.
Differential Revision: https://reviews.llvm.org/D74224
On some targets, like SPARC, forming overflow ops is only profitable if
the math result is used: https://godbolt.org/z/DxSmdB
This patch adds a new MathUsed parameter to allow the targets
to make the decision and defaults to only allowing it
if the math result is used. That is the conservative choice.
This patch also updates AArch64ISelLowering, X86ISelLowering,
ARMISelLowering.h, SystemZISelLowering.h to allow forming overflow
ops if the math result is not used. On those targets using the
overflow intrinsic for the overflow check only generates better code.
Reviewers: nikic, RKSimon, lebedev.ri, spatel
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D74722
We already make use of the VADDV vector reduction instruction for cases
where the input and the output start out at the same type. The MVE
instruction however will sum into an i32, so if we are summing a v16i8
into an i32, we can still use the same instructions. In terms of IR,
this looks like a sext of a legal type (v16i8) into a very illegal type
(v16i32) and a vecreduce.add of that into the result. This means we have
to catch the pattern early in a DAG combine, producing a target VADDVs/u
node, where the signedness is now important.
This is the first part, handling VADDV and VADDVA. There are also
VADDVL/VADDVLA instructions, which are interesting because they sum into
a 64bit value. And VMLAV and VMLALV, which are interesting because they
also do a multiply of two values. It may look a little odd in places as
a result.
On it's own this will probably not do very much, as the vectorizer will
not produce this IR yet.
Differential Revision: https://reviews.llvm.org/D74218
Essentially, fold OrderedBasicBlock into BasicBlock, and make it
auto-invalidate the instruction ordering when new instructions are
added. Notably, we don't need to invalidate it when removing
instructions, which is helpful when a pass mostly delete dead
instructions rather than transforming them.
The downside is that Instruction grows from 56 bytes to 64 bytes. The
resulting LLVM code is substantially simpler and automatically handles
invalidation, which makes me think that this is the right speed and size
tradeoff.
The important change is in SymbolTableTraitsImpl.h, where the numbering
is invalidated. Everything else should be straightforward.
We probably want to implement a fancier re-numbering scheme so that
local updates don't invalidate the ordering, but I plan for that to be
future work, maybe for someone else.
Reviewed By: lattner, vsk, fhahn, dexonsmith
Differential Revision: https://reviews.llvm.org/D51664
Summary:
This patch adds a new MVE intrinsics family, `vbrsrq`: vector bit
reverse and shift right. The intrinsics are compiled into the VBRSR
instruction. Two new LLVM IR intrinsics were also added: arm.mve.vbrsr
and arm.mve.vbrsr.predicated.
Reviewers: simon_tatham, dmgreen, ostannard, MarkMurrayARM
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74721
This patch enables the debug entry values feature.
- Remove the (CC1) experimental -femit-debug-entry-values option
- Enable it for x86, arm and aarch64 targets
- Resolve the test failures
- Leave the llc experimental option for targets that do not
support the CallSiteInfo yet
Differential Revision: https://reviews.llvm.org/D73534
Summary:
These are in some sense the inverse of vmovl[bt]q: they take a vector
of n wide elements and truncate each to half its width. So they only
write half a vector's worth of output data, and therefore they also
take an 'inactive' parameter to provide the other half of the data in
the output vector. So vmovnb overwrites the even lanes of 'inactive'
with the narrowed values from the main input, and vmovnt overwrites
the odd lanes.
LLVM had existing codegen which generates these MVE instructions in
response to IR that takes two vectors of wide elements, or two vectors
of narrow ones. But in this case, we have one vector of each. So my
clang codegen strategy is to narrow the input vector of wide elements
by simply reinterpreting it as the output type, and then we have two
narrow vectors and can represent the operation as a vector shuffle
that interleaves lanes from both of them.
Even so, not all the cases I needed ended up being selected as a
single MVE instruction, so I've added a couple more patterns that spot
combinations of the 'MVEvmovn' and 'ARMvrev32' SDNodes which can be
generated as a VMOVN instruction with operands swapped.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74337
Summary:
These intrinsics take a vector of 2n elements, and return a vector of
n wider elements obtained by sign- or zero-extending every other
element of the input vector. They're represented in IR as a
shufflevector that extracts the odd or even elements of the input,
followed by a sext or zext.
Existing LLVM codegen already matches this pattern and generates the
VMOVLB instruction (which widens the even-index input lanes). But no
existing isel rule was generating VMOVLT, so I've added some. However,
the new rules currently only work in little-endian MVE, because the
pattern they expect from isel lowering includes a bitconvert which
doesn't have the right semantics in big-endian.
The output of one existing codegen test is improved by those new
rules.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74336
Summary:
When we start putting instances of `ARMVectorRegCast` in complex isel
patterns, it will be awkward that they're often turned into the more
standard `bitconvert` in little-endian mode. We'd rather not have to
write separate isel patterns for the two endiannesses, matching
different but equivalent cast operations.
This change aims to fix that awkwardness in advance, by turning the
Tablegen record `ARMVectorRegCast` from a simple `SDNode` instance
into a `PatFrags` that can match either kind of cast – with a
predicate that prevents it matching a bitconvert in the big-endian
case, where bitconvert isn't semantically identical.
No existing code generation should be affected by this change, but it
will enable the patterns introduced by D74336 to work in both
endiannesses.
Reviewers: dmgreen
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74716
Summary:
vclzq maps nicely to the existing target-independent @llvm.ctlz IR
intrinsic. But vclsq ('count leading sign bits') has no corresponding
target-independent intrinsic, so I've made up @llvm.arm.mve.vcls.
This commit adds the unpredicated forms only.
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74335
Summary:
This adds the unpredicated forms of six different MVE intrinsics which
all round a vector of floating-point numbers to integer values,
leaving them still in FP format, differing only in rounding mode and
exception settings.
Five of them map to existing target-independent intrinsics in LLVM IR,
such as @llvm.trunc and @llvm.rint. The sixth, mapping to the `vrintn`
instruction, is done by inventing a target-specific intrinsic.
(`vrintn` behaves the same as `vrintx` in terms of the output value:
the side effects on the FPSCR flags are the only difference between
the two. But ACLE specifies separate user-callable intrinsics for the
two, so the side effects matter enough to make sure we generate the
right one of the two instructions in each case.)
Reviewers: dmgreen, miyuki, MarkMurrayARM, ostannard
Reviewed By: miyuki
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74333
mutateStrictFPToFP can delete the node and replace it with another with the same
value which can later cause problems, and returning the result of
mutateStrictFPToFP doesn't work because SelectionDAGLegalize expects that the
returned value has the same number of results as the original. Instead handle
things by doing the mutation manually.
Differential Revision: https://reviews.llvm.org/D74726
Summary:
This patch adds vector-scalar variants to the following families of
MVE intrinsics:
* vaddq
* vsubq
* vmulq
* vqaddq
* vqsubq
* vhaddq
* vhsubq
* vqdmulhq
* vqrdmulhq
The vector-scalar variants perform a splat operation on the scalar
operand and then perform the same operations as their vector-vector
counterparts. Code generation is done accordingly (using LLVM IR 'insert'
and 'shuffle' operations which are later converted into an ARMvdup
SDNode).
Reviewers: simon_tatham, dmgreen, MarkMurrayARM, ostannard
Reviewed By: dmgreen
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74620
Summary:
This patch adds assembly-level support for a new Arm M-profile
architecture extension, Custom Datapath Extension (CDE).
A brief description of the extension is available at
https://developer.arm.com/architectures/instruction-sets/custom-instructions
The latest specification for CDE is currently a beta release and is
available at
https://static.docs.arm.com/ddi0607/aa/DDI0607A_a_armv8m_arm_supplement_cde.pdf
CDE allows chip vendors to add custom CPU instructions. The CDE
instructions re-use the same encoding space as existing coprocessor
instructions (such as MRC, MCR, CDP etc.). Each coprocessor in range
cp0-cp7 can be configured as either general purpose (GCP) or custom
datapath (CDEv1). This configuration is defined by the CPU vendor and
is provided to LLVM using 8 subtarget features: cdecp0 ... cdecp7.
The semantics of CDE instructions are implementation-defined, but the
instructions are guaranteed to be pure (that is, they are stateless,
they do not access memory or any registers except their explicit
inputs/outputs).
CDE requires the CPU to support at least Armv8.0-M mainline
architecture. CDE includes 3 sets of instructions:
* Instructions that operate on general purpose registers and NZCV
flags
* Instructions that operate on the S or D register file (require
either FP or MVE extension)
* Instructions that operate on the Q register file, require MVE
The user-facing names that can be specified on the command line are
the same as the 8 subtarget feature names. For example:
$ clang -target arm-none-none-eabi -march=armv8m.main+cdecp0+cdecp3
tells the compiler that the coprocessors 0 and 3 are configured as
CDEv1 and the remaining coprocessors are configured as GCP (which is
the default).
Reviewers: simon_tatham, ostannard, dmgreen, eli.friedman
Reviewed By: simon_tatham
Subscribers: kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D74044
David Green