When InstCombine initially populates the worklist, it already
performs constant folding and DCE. However, as the instructions
are initially visited in program order, this DCE can pick up only
the last instruction of a dead chain, the rest would only get
picked up in the main InstCombine run.
To avoid this, we instead perform the DCE in separate pass over the
collected instructions in reverse order, which will allow us to
pick up full dead instruction chains. We already need to do this
reverse iteration anyway to populate the worklist, so this
shouldn't add extra cost.
This by itself only fixes a small part of the problem though:
The same basic issue also applies during the main InstCombine loop.
We generally always want DCE to occur as early as possible,
because it will allow one-use folds to happen. Address this by also
performing DCE while adding deferred instructions to the main worklist.
This drops the number of tests that perform more than 2 InstCombine
iterations from ~80 to ~40. There's some spurious test changes due
to operand order / icmp toggling.
Differential Revision: https://reviews.llvm.org/D75008
Followup to D73919 with another batch of replacements of
setOperand() -> replaceOperand(), to make sure the old
operand gets DCEd right away.
Differential Revision: https://reviews.llvm.org/D74932
This reverts commit b54a8ec1bc.
The commit triggered debug invariance (different output with/without
-g). The patch seems to have exposed a pre-existing invariance problem
in GlobalOpt, which I'll write a bug report for.
Adds a replaceOperand() helper, which is like Instruction.setOperand()
but adds the old operand to the worklist. This reduces the amount of
missing or incorrect worklist management.
This only applies the helper to a relatively small subset of
setOperand() calls in InstCombine, namely those of the pattern
`I.setOperand(); return &I;`, where it is most obviously applicable.
Differential Revision: https://reviews.llvm.org/D73803
This renames Worklist.AddDeferred() to Worklist.add() and
Worklist.Add() to Worklist.push(). The intention here is that
Worklist.add() should be the go-to method for explicit worklist
management, while the raw Worklist.push() is mostly for
InstCombine internals. I will then migrate uses of Worklist.push()
to Worklist.add() in followup changes.
As suggested by spatel on D73411 I'm also changing the remaining
method names to lowercase first character, in line with current
coding standards.
Differential Revision: https://reviews.llvm.org/D73745
bo (splat X), (bo Y, OtherOp) --> bo (splat (bo X, Y)), OtherOp
This patch depends on the splat analysis enhancement in D73549.
See the test with comment:
; Negative test - mismatched splat elements
...as the motivation for that first patch.
The motivating case for reassociating splatted ops is shown in PR42174:
https://bugs.llvm.org/show_bug.cgi?id=42174
In that example, a slight change in order-of-associative math results
in a big difference in IR and codegen. This patch gets all of the
unnecessary shuffles out of the way, but doesn't address the potential
scalarization (see D50992 or D73480 for that).
Differential Revision: https://reviews.llvm.org/D73703
Summary:
When constant folding, constants that are wrapped in metadata were not
folded. This could lead to dbg.values being the only user of a constant
expression, due to the non-dbg uses having been rewritten, resulting in
the constant later on being removed by some other pass. This occurred
with the attached test case, in which the non-rewritten GEP in the
dbg.value intrinsic was later on removed by globalopt.
This patch makes the code look through metadata and fold such constants.
I guess that we in the future may want to allow dbg.values using GEPs and
other constant expressions to be emittable even if there are no non-dbg
uses, but for example SelectionDAG does not support that.
Reviewers: jmorse, aprantl, vsk, davide
Reviewed By: aprantl, vsk, davide
Subscribers: hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D73630
InstCombine operates on the basic premise that the operands of the
currently processed instruction have already been simplified. It
achieves this by pushing instructions to the worklist in reverse
program order, so that instructions are popped off in program order.
The worklist management in the main combining loop also makes sure
to uphold this invariant.
However, the same is not true for all the code that is performing
manual worklist management. The largest problem (addressed in this
patch) are instructions inserted by InstCombine's IRBuilder. These
will be pushed onto the worklist in order of insertion (generally
matching program order), which means that a) the users of the
original instruction will be visited first, as they are pushed later
in the main loop and b) the newly inserted instructions will be
visited in reverse program order.
This causes a number of problems: First, folds operate on instructions
that have not had their operands simplified, which may result in
optimizations being missed (ran into this in
https://reviews.llvm.org/D72048#1800424, which was the original
motivation for this patch). Additionally, this increases the amount
of folds InstCombine has to perform, both within one iteration, and
by increasing the number of total iterations.
This patch addresses the issue by adding a Worklist.AddDeferred()
method, which is used for instructions inserted by IRBuilder. These
will only be added to the real worklist after the combine finished,
and in reverse order, so they will end up processed in program order.
I should note that the same should also be done to nearly all other
uses of Worklist.Add(), but I'm starting with just this occurrence,
which has by far the largest test fallout.
Most of the test changes are due to
https://bugs.llvm.org/show_bug.cgi?id=44521 or other cases where
we don't canonicalize something. These are neutral. One regression
has been addressed in D73575 and D73647. The remaining regression
in an shl+sdiv fold can't really be fixed without dropping another
transform, but does not seem particularly problematic in the first
place.
Differential Revision: https://reviews.llvm.org/D73411
Followup to D72978. This moves existing negation handling in
InstCombine into freelyNegateValue(), which make it composable.
In particular, root negations of div/zext/sext/ashr/lshr/sub can
now always be performed through a shl/trunc as well.
Differential Revision: https://reviews.llvm.org/D73288
Fixes https://bugs.llvm.org/show_bug.cgi?id=44529. We already have
a combine to sink a negation through a left-shift, but it currently
only works if the shift operand is negatable without creating any
instructions. This patch introduces freelyNegateValue() as a more
powerful extension of dyn_castNegVal(), which allows negating a
value as long as this doesn't end up increasing instruction count.
Specifically, this patch adds support for negating A-B to B-A.
This mechanism could in the future be extended to handle general
negation chains that a) start at a proper 0-X negation and b) only
require one operand to be freely negatable. This would end up as a
weaker form of D68408 aimed at the most obviously profitable subset
that eliminates a negation entirely.
Differential Revision: https://reviews.llvm.org/D72978
There are two related bugs here: First, we don't add the operand
we're replacing to the worklist, which means it may not get DCEd
(see test change). Second, usually this would just get picked up
in the next iteration, but we also do not report the instruction
as changed. This means that we do not get that extra instcombine
iteration, and more importantly, may break the pass pipeline, as
the function is not marked as changed.
Differential Revision: https://reviews.llvm.org/D72864
Currently, there is no way to disable ExpensiveCombines when doing
a standalone opt -instcombine run, as that's the default, and the
opt option can currently only be used to force enable, not to force
disable. The only way to disable expensive combines is via -O1 or -O2,
but that of course also runs the rest of the kitchen sink...
This patch allows using opt -instcombine -expensive-combines=0 to
run InstCombine without ExpensiveCombines.
Differential Revision: https://reviews.llvm.org/D72861
This is a less ambitious alternative to previous attempts to fix
this bug with:
rG56b2aee1875a
rGef02831f0a4e
rG56b2aee1875a
...because those all failed bot testing with use-after-free or
other problems.
The original crashing/assert problem is still showing up on
various fuzzers, so I've added a new minimal test based on
another one of those failures.
Instead of trying to manage and coordinate the logic in
isAllocSiteRemovable() with the deletion loops, just loosen
the existing code that handles casts and GEP by replacing
with undef to allow other opcodes. That means that no
instructions with uses should assert on deletion, and there
are hopefully no non-obvious sanitizer bugs induced.
Summary:
This patch limits the default number of iterations performed by InstCombine. It also exposes a new option that allows to specify how many iterations is considered getting stuck in an infinite loop.
Based on experiments performed on real-world C++ programs, InstCombine seems to perform at most ~8-20 iterations, so treating 1000 iterations as an infinite loop seems like a safe choice. See D71145 for details.
The two limits can be specified via command line options.
Reviewers: spatel, lebedev.ri, nikic, xbolva00, grosser
Reviewed By: spatel
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71673
Summary:
This patch adds instructions to the InstCombine worklist after they are properly inserted. This way we don't get `<badref>`s printed when logging added instructions.
It also adds a check in `Worklist::Add` that ensures that all added instructions have parents.
Simple test case that illustrates the difference when run with `--debug-only=instcombine`:
```
define i32 @test35(i32 %a, i32 %b) {
%1 = or i32 %a, 1135
%2 = or i32 %1, %b
ret i32 %2
}
```
Before this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: <badref> = or i32 %2, 1135
...
```
With this patch:
```
INSTCOMBINE ITERATION #1 on test35
IC: ADDING: 3 instrs to worklist
IC: Visiting: %1 = or i32 %a, 1135
IC: Visiting: %2 = or i32 %1, %b
IC: ADD: %2 = or i32 %a, %b
IC: Old = %3 = or i32 %1, %b
New = <badref> = or i32 %2, 1135
IC: ADD: %3 = or i32 %2, 1135
...
```
Reviewers: fhahn, davide, spatel, foad, grosser, nikic
Reviewed By: nikic
Subscribers: nikic, lebedev.ri, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71093
Summary:
This patch teaches InstCombine to accept a new parameter: maximum number of iterations over functions.
InstCombine tries to simplify instructions by iterating over the whole function until the function stops changing. As a consequence, the last iteration before reaching a fixpoint visits all instructions in the worklist and never performs any rewrites.
Bounding the number of iterations can have 2 benefits:
* In case the users of the pass can make a good guess about the number of required iterations, we can save the time normally spent on the last iteration that doesn't change anything.
* When the wants to use InstCombine as a cleanup pass, it may be enough to run just a few iterations and stop even before reaching a fixpoint. This can be also useful for implementing a lightweight pass pipeline (think `-O1`).
This patch does not change the behavior of opt or Clang -- limiting the number of iterations is entirely opt-in.
Reviewers: fhahn, davide, spatel, foad, nlopes, grosser, lebedev.ri, nikic, xbolva00
Reviewed By: spatel
Subscribers: craig.topper, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71145
Summary:
This reverts commit c3b06d0c39.
Reason for revert: Caused miscompiles when inserting assume for undef.
Also adds a test to prevent similar breakage in future.
Fixes PR44154.
Reviewers: rnk, jdoerfert, efriedma, xbolva00
Reviewed By: rnk
Subscribers: thakis, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70933
This file lists every pass in LLVM, and is included by Pass.h, which is
very popular. Every time we add, remove, or rename a pass in LLVM, it
caused lots of recompilation.
I found this fact by looking at this table, which is sorted by the
number of times a file was changed over the last 100,000 git commits
multiplied by the number of object files that depend on it in the
current checkout:
recompiles touches affected_files header
342380 95 3604 llvm/include/llvm/ADT/STLExtras.h
314730 234 1345 llvm/include/llvm/InitializePasses.h
307036 118 2602 llvm/include/llvm/ADT/APInt.h
213049 59 3611 llvm/include/llvm/Support/MathExtras.h
170422 47 3626 llvm/include/llvm/Support/Compiler.h
162225 45 3605 llvm/include/llvm/ADT/Optional.h
158319 63 2513 llvm/include/llvm/ADT/Triple.h
140322 39 3598 llvm/include/llvm/ADT/StringRef.h
137647 59 2333 llvm/include/llvm/Support/Error.h
131619 73 1803 llvm/include/llvm/Support/FileSystem.h
Before this change, touching InitializePasses.h would cause 1345 files
to recompile. After this change, touching it only causes 550 compiles in
an incremental rebuild.
Reviewers: bkramer, asbirlea, bollu, jdoerfert
Differential Revision: https://reviews.llvm.org/D70211
I think we have to be a bit more careful when it comes to moving
ops across shuffles, if the op does restrict undef. For example, without
this patch, we would move 'and %v, <0, 0, -1, -1>' over a
'shufflevector %a, undef, <undef, undef, 1, 2>'. As a result, the first
2 lanes of the result are undef after the combine, but they really
should be 0, unless I am missing something.
For ops that do fold to undef on undef operands, the current behavior
should be fine. I've add conservative check OpDoesRestrictUndef, maybe
there's a better existing utility?
Reviewers: spatel, RKSimon, lebedev.ri
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D70093
Re-try because earlier attempts were reverted due to use-after-free.
Hopefully, diagnosed correctly this time - we replace/remove the
invariant.start first rather than the invariant.end to avoid angering
worklist-based iteration.
We gather a set of white-listed instructions in isAllocSiteRemovable() and then
replace/erase them. But we don't know in general if the instructions in the set
have uses amongst themselves, so order of deletion makes a difference.
There's already a special-case for the llvm.objectsize intrinsic, so add another
for llvm.invariant.start.
Should fix:
https://bugs.llvm.org/show_bug.cgi?id=43723
Differential Revision: https://reviews.llvm.org/D69977
Summary:
SimplifySelectsFeedingBinaryOp simplified binary ops when both operands
were selects with the same condition. This patch extends it to handle
these cases where only one operand is a select:
X op (C ? P : Q) -> C ? (X op P) : (X op Q)
// if X op P and X op Q both simplify
(C ? P : Q) op Y -> C ? (P op Y) : (Q op Y)
// if P op Y and Q op Y both simplify
For example: X *fast (C ? 1.0 : 0.0) -> C ? X : 0.0
Reviewers: mcberg2017, majnemer, craig.topper, qcolombet, mcrosier
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64713
Re-try rGef02831f0a4e (reverted due to use-after-free), but bail out completely
if we encounter an unexpected llvm.invariant.start.
We gather a set of white-listed instructions in isAllocSiteRemovable() and then
replace/erase them. But we don't know in general if the instructions in the set
have uses amongst themselves, so order of deletion makes a difference.
There's already a special-case for the llvm.objectsize intrinsic, so add another
for llvm.invariant.end.
Should fix:
https://bugs.llvm.org/show_bug.cgi?id=43723
Differential Revision: https://reviews.llvm.org/D69977
We gather a set of white-listed instructions in isAllocSiteRemovable() and then
replace/erase them. But we don't know in general if the instructions in the set
have uses amongst themselves, so order of deletion makes a difference.
There's already a special-case for the llvm.objectsize intrinsic, so add another
for llvm.invariant.end.
Should fix:
https://bugs.llvm.org/show_bug.cgi?id=43723
Differential Revision: https://reviews.llvm.org/D69977
Instcombiner pass was erasing trivially dead instruction without updating dependent llvm.dbg.value.
which was not showing programmer current state of variables while debugging.
As a part of this fix I did following,
Iterate throught all the users (llvm.dbg) of a instruction which is trivially dead and set each if them undef, Before deleting the instruction.
Now user will see optimized out, when try to print those variables.
This fixes
https://bugs.llvm.org/show_bug.cgi?id=43893
This is my first fix to llvm.
Patch by kamlesh kumar!
Differential Revision: https://reviews.llvm.org/D69809
Summary:
in the following C code the branch is not removed by clang in O3.
```
int f1(char* p) {
int i1 = __builtin_strlen(p);
if (!p)
return -1;
return i1;
}
```
The issue is that the call to strlen is sunk to the following block by instcombine. In its new place the call to strlen doesn't dominate the use in the icmp anymore so value tracking can't see that p cannot be null.
This patch resolves the issue by inserting an assumption at the place of the call before sinking a call when that call can be used to prove an argument to be nonnull.
This resolves this issue at O3.
Reviewers: majnemer, xbolva00, fhahn, jdoerfert, spatel, efriedma
Reviewed By: jdoerfert
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69477
The test case here previously infinite looped. Only one element from the GEP is used so SimplifyDemandedVectorElts would replace the other lanes in each index with undef leading to the first index being <0, undef, undef, undef>. But there's a GEP transform that tries to replace an index into a 0 sized type with a zero index. But the zero index check only works on ConstantInt 0 or ConstantAggregateZero so it would turn the index back to zeroinitializer. Resulting in a loop.
The fix is to use m_Zero() to allow a vector of zeroes and undefs.
Differential Revision: https://reviews.llvm.org/D67977
llvm-svn: 373000
Currently m_Br only takes references to BasicBlock*, which limits its
flexibility. For example, you have to declare a variable, even if you
ignore the result or you have to have additional checks to make sure the
matched BB matches an expected one.
This patch adds m_BasicBlock and m_SpecificBB matchers, which can be
used like the existing matchers for constants or values.
I also had a look at the existing uses and updated a few. IMO it makes
the code a bit more explicit.
Reviewers: spatel, craig.topper, RKSimon, majnemer, lebedev.ri
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D68013
llvm-svn: 372885
TryToSinkInstruction() has a bug: While updating debug info for
sunk instruction, it could clone dbg.declare intrinsic.
That is wrong. There could be only one dbg.declare.
The fix is to not clone dbg.declare intrinsic and to update
it`s arguments, to not to point to sunk instruction.
Differential Revision: https://reviews.llvm.org/D67217
llvm-svn: 371587
Summary:
This is the first change to enable the TLI to be built per-function so
that -fno-builtin* handling can be migrated to use function attributes.
See discussion on D61634 for background. This is an enabler for fixing
handling of these options for LTO, for example.
This change should not affect behavior, as the provided function is not
yet used to build a specifically per-function TLI, but rather enables
that migration.
Most of the changes were very mechanical, e.g. passing a Function to the
legacy analysis pass's getTLI interface, or in Module level cases,
adding a callback. This is similar to the way the per-function TTI
analysis works.
There was one place where we were looking for builtins but not in the
context of a specific function. See FindCXAAtExit in
lib/Transforms/IPO/GlobalOpt.cpp. I'm somewhat concerned my workaround
could provide the wrong behavior in some corner cases. Suggestions
welcome.
Reviewers: chandlerc, hfinkel
Subscribers: arsenm, dschuff, jvesely, nhaehnle, mehdi_amini, javed.absar, sbc100, jgravelle-google, eraman, aheejin, steven_wu, george.burgess.iv, dexonsmith, jfb, asbirlea, gchatelet, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66428
llvm-svn: 371284
Always true/false checks were flagged by static analysis;
https://bugs.llvm.org/show_bug.cgi?id=43143
I have not confirmed the logic difference in propagating nsw vs. nuw,
but presumably we would have noticed a bug by now if that was wrong.
llvm-svn: 370248
Summary:
In SimplifySelectsFeedingBinaryOp, propagate fast math flags from the
outer op into both arms of the new select, to take advantage of
simplifications that require fast math flags.
Reviewers: mcberg2017, majnemer, spatel, arsenm, xbolva00
Subscribers: wdng, javed.absar, kristof.beyls, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D65658
llvm-svn: 368175
Nikita Popov