Breakpad had bugs in earlier versions where it would take a 20 byte ELF build ID and put it into the minidump file as a 16 byte PDB70 UUID with an age of zero. This would make it impossible to do postmortem debugging with one of these older minidump files.
This fix allows partial matching of UUIDs. To do this we first try and match with the full UUID value, and then fall back to removing the original directory path from the module specification and we remove the UUID requirement, and then manually do the matching ourselves. This allows scripts to find symbols files using a symbol server, place them all in a directory, use the "setting set target.exec-search-paths" setting to specify the directory, and then load the core file. The Target::GetSharedModule() can then find the correct file without doing any other matching and load it.
Tests were added to cover a partial UUID match where the breakpad file has a 16 byte UUID and the actual file on disk has a 20 byte UUID, both where the first 16 bytes match, and don't match.
Differential Revision: https://reviews.llvm.org/D60001
llvm-svn: 357482
I'm not sure why this surfaced at this particular point, but
TestCommandScriptImmediateOutput (a pexpect test) had a synchronization
issue, where the (lldb) promts it was expecting were getting out of
sync. This happened for two reasons:
- it did not expect the initial (lldb) prompt we print at startup
- launchArgs() returned None, which resulted in an extra "target create
None" command being issued to lldb (and an extra unhandled prompt
being printed).
Resolving these two issues seems to fix (or at least, improve) the test.
llvm-svn: 357459
The test was hitting llvm_unreachable in
Platform::GetSoftwareBreakpointTrapOpcode because it could not figure
out the architecture of the process. Since that is not the purpose of
the test, I change the test to use an explicit
CreateTargetWithFileAndTargetTriple command to specify it.
llvm-svn: 357456
Summary:
In case of a breakpoint site overlapping with the destination address,
the WriteMemory method reported an incorrect memory size.
Instead of returning the right amount of bytes written, it falls through
the scope and returned 0.
Signed-off-by: Med Ismail Bennani <medismail.bennani@gmail.com>
Reviewers: jasonmolenda, friss, jingham
Subscribers: JDevlieghere, davide, lldb-commits, #lldb
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D60022
llvm-svn: 357420
Include support for NetBSD core dumps from evbarm/aarch64 system,
and matching test cases for them.
Based on earlier work by Kamil Rytarowski.
Differential Revision: https://reviews.llvm.org/D60034
llvm-svn: 357399
The changes were reverted due to ubsan errors (unaligned accesses). Here
I fix those errors by first copying the data into aligned storage.
Besides fixing alignment issues, this also fixes reading of minidump
strings on big-endian systems.
llvm-svn: 356896
This reverts the following two commits:
Revert "Extend r356573 (minidump UUID handling) to cover elf build-ids too"
Revert "Fix UUID decoding from minidump files"
Greg's original commit broke the sanitizer bot which has been red for
several days now.
http://green.lab.llvm.org/green/view/LLDB/job/lldb-sanitized/
llvm-svn: 356806
Breakpad (but not crashpad) will insert an empty (all-zero) build-id
record for modules which do not have a build-id. This tells lldb to
treat such records as empty/invalid uuids.
llvm-svn: 356751
This patch fixes:
UUIDs now don't include the age field from a PDB70 when the age is zero. Prior to this they would incorrectly contain the zero age which stopped us from being able to match up the UUID with real files.
UUIDs for Apple targets get the first 32 bit value and next two 16 bit values swapped. Breakpad incorrectly swaps these values when it creates darwin minidump files, so this must be undone so we can match up symbol files with the minidump modules.
UUIDs that are all zeroes are treated as invalid UUIDs. Breakpad will always save out a UUID, even if one wasn't available. This caused all files that have UUID values of zero to be uniqued to the first module that had a zero UUID. We now don't fill in the UUID if it is all zeroes.
Added tests for PDB70 and ELF build ID based CvRecords.
Differential Revision: https://reviews.llvm.org/D59433
llvm-svn: 356573
Python 3 default encoding is utf-8, so taking random bytes and
interpreting them as a string might result in invalid unicode sequences.
As the only thing we care about here is that the formatter shows the
elements of the underyling array, relax the string matching (this is
good enough as all the elements are distinct so they resolve to different
strings).
llvm-svn: 356096
There was a crash that would happen if an IDE would ask for a child of a shared pointer via any SB API call that ends up calling StackFrame::GetValueForVariableExpressionPath(). The previous code expects an error to be set describing why the synthetic child of a type was not able to be found, but we have some synthetic child providers that weren't setting the error and returning an empty value object shared pointer. This fixes that to ensure we don't lose our debug session by crashing, fully tests GetValueForVariableExpressionPath functionality, and ensures we don't crash on GetValueForVariableExpressionPath() in the future.
Differential Revision: https://reviews.llvm.org/D59200
llvm-svn: 355850
Fix 2lwp_process_SIGSEGV NetBSD core test to terminate inside regular
function rather than libc call, in order to get reproducible backtrace
on different platforms.
Differential Revision: https://reviews.llvm.org/D59177
llvm-svn: 355786
Adjust the XFAIL-ing tests to match consistent results from buildbot.
I'm going to work on differences between them and my local results
following this.
llvm-svn: 355774
Fix the NetBSD core test not to verify libc function names in backtrace.
This obviously requires the same libc.so as originally used to produce
the core file, and so it is going to fail everywhere except on my
system.
llvm-svn: 355747
Improve the support for processing NetBSD cores. Fix reading process
identifier, thread information and associating the terminating signal
with the correct thread.
Includes test cases for single-threaded program receiving SIGSEGV,
and two dual-threaded programs: one where thread receives the signal,
and the other one when the whole process is signalled.
Differential Revision: https://reviews.llvm.org/D32149
llvm-svn: 355736
I committed an implementation of GetClangResourceDir on windows but
forgot to update this test. I merged the tests like I intended to, but I
realized that the test was actually failing. After looking into it, it
appears that FileSystem::Resolve was taking the path and setting
the FileSpec's Directory to "/path/to/lldb/lib/clang/" and the File to
"9.0.0" which isn't what we want. So I removed the resolve line from
DefaultComputeClangResourceDir.
llvm-svn: 355648
Core files need to know the size of the PRSTATUS header so that we can grab the register values that follow it. The code that figure out this size was using a hard coded list of architecture cores instead of relying on 32 or 64 bit for most cores.
The fix here fixes core files for 32 bit ARM. Prior to this the PRSTATUS header size was being returned as zero and the register values were being taken from the first bytes of the PRSTATUS struct (signo, etc).
Differential Revision: https://reviews.llvm.org/D58985
llvm-svn: 355526
Summary:
I'm doing this because I plan on implementing `ComputeClangResourceDirectory`
on windows so that `GetClangResourceDir` will work. Additionally, I made
test_paths make sure that the directory member of the returned FileSpec is not
none. This will fail on windows since `ComputeClangResourceDirectory` isn't
implemented yet.
Differential Revision: https://reviews.llvm.org/D58748
llvm-svn: 355463
Add a convenience 'expectedFailureNetBSD' decorator and mark all tests
currently failing on NetBSD with it. Also skip a few tests that hang
the test suite. This should establish a baseline for the test suite
and get us closer to enabling tests on buildbot. This will help us
catch regressions while we still have a lot of work to do to get tests
working.
It seems that there are also some flaky tests. I am going to address
them later on.
Differential Revision: https://reviews.llvm.org/D58527
llvm-svn: 355320
It turns out these tests actually succeed, if one has a clang with
address sanitizer support enabled (i.e., has enabled the compiler-rt
project). I guess none of the linux lldb devs have done that until now.
llvm-svn: 354976
The deserializer was not handling this case. For now we just
accept the absent option, and set it to the breakpoint default.
This will be more important if/when I figure out how to serialize
the options set on breakpont locations.
<rdar://problem/48322664>
llvm-svn: 354702
Fix the load_* using test Makefiles not to link -ldl on NetBSD.
There is no such a library on NetBSD, and dlopen() is available
without a library. Quoting the manpage:
(These functions are not in a library. They are included in every
dynamically linked program automatically.)
To resolve this portably, introduce a new USE_LIBDL option. If it set
to 1, Makefile.rules automatically appends -ldl on platforms needing it.
Differential Revision: https://reviews.llvm.org/D58517
llvm-svn: 354617
Getting failure when building in a directory which is symlinked elsewhere:
Failing Tests (1):
lldb-Suite :: functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.py
lldb-Suite :: source-manager/TestSourceManager.py
For TestCompDirSymLink:
------------------------------------------------------------------------------
runCmd: file .../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/CompDirSymLink
output: Current executable set to '.../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/CompDirSymLink' (x86_64).
runCmd: settings set plugin.symbol-file.dwarf.comp-dir-symlink-paths /proc/self/cwd
output: None
runCmd: breakpoint set -f ".../lldb-test-build.noindex/functionalities/breakpoint/comp_dir_symlink/TestCompDirSymLink.test_symlink_paths_set_procselfcwd_dwarf/relative.cpp" -l 11
output: Breakpoint 1: no locations (pending).
WARNING: Unable to resolve breakpoint to any actual locations.
It is because /proc/self/cwd (used above for plugin.symbol-file.dwarf.comp-dir-symlink-paths) points to an already resolved directory:
(cd /tmp;mkdir real;ln -s real symlink;cd symlink;ls -l /proc/self/cwd)
lrwxrwxrwx 1 jkratoch jkratoch 0 Feb 20 19:55 /proc/self/cwd -> /tmp/real/
------------------------------------------------------------------------------
For TestSourceManager the resolving is done by 'make -C' as found by Pavel Labath.
Differential Revision: https://reviews.llvm.org/D58465
llvm-svn: 354556
Summary:
The compilation of the TestDataFormatterLibcxxListLoop.py currently fails with this error:
```
functionalities/data-formatter/data-formatter-stl/libcxx/list/loop/main.cpp:19:24: error: no member named '__value_' in 'std::__1::__list_node_base<int, void *>'
assert(third_elem->__value_ == 3);
~~~~~~~~~~ ^
```
It seems the internal structure of list has changed with the 3.8 release. This patch makes the test compile with the current libc++ and with the previous libc++.
Reviewers: shafik, zturner, labath
Reviewed By: labath
Subscribers: christof, jdoerfert, lldb-commits
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D58273
llvm-svn: 354202
This applies the same fix that was done in r354106 to the lldb-server
test: bitcasting the string to a bytes object before sending it over a
socket. Since the gdb-remote protocol occasionally contains binary data,
and it does not assign any particular encoding to them, this is the
right thing to do here.
llvm-svn: 354114
An equivalent change was made to RemapPaths, but it needed to be made
here as well. Also added a test for this and made the setup a little
more complex to avoid false successes.
<rdar://problem/47642498>
Differential Revision: https://reviews.llvm.org/D57552
llvm-svn: 353243
One considers it integer division, the other doesn't.
Move to `//` (floor division) so that this test passes
independently from the version.
llvm-svn: 352706
This fixes most references to the paths:
llvm.org/svn/
llvm.org/git/
llvm.org/viewvc/
github.com/llvm-mirror/
github.com/llvm-project/
reviews.llvm.org/diffusion/
to instead point to https://github.com/llvm/llvm-project.
This is *not* a trivial substitution, because additionally, all the
checkout instructions had to be migrated to instruct users on how to
use the monorepo layout, setting LLVM_ENABLE_PROJECTS instead of
checking out various projects into various subdirectories.
I've attempted to not change any scripts here, only documentation. The
scripts will have to be addressed separately.
Additionally, I've deleted one document which appeared to be outdated
and unneeded:
lldb/docs/building-with-debug-llvm.txt
Differential Revision: https://reviews.llvm.org/D57330
llvm-svn: 352514
This makes it easier to exclude the test n bots that test earlier
DWARF formats, also it feels like this is the better decision for this
testcase anyway.
llvm-svn: 352111
The new LLVM header is one line shorter than the old one, which lead to
some test failures. Ideally tests should rely on line numbers for
breakpoints or output, but that's a different discussion. Hopefully this
turns the bots green again.
llvm-svn: 351779
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
These are tests that found actual, but hard to fix, bugs that are
tracked elsewhere. Leaving them red only distracts from new failures
this bot finds.
llvm-svn: 349851
This is a set of tests that were all marked as failing becuse of several different bugs. A couple of the bugs are now resolved as fixed since all the tests that were failing associated with the bug are now passing. It is possible that some of them are false positives, but there's a large number of unexpectedly passing tests on Windows, so I am doing a bulk un-xfail to get the buildbot to green.
llvm-svn: 349713
Prior to this change we would show the name of the section that a memory region belonged to but not its actual region name. Now we show this,. Added a test that reuses the regions-linux-map.dmp minidump file to test this and verify the correct region names for various memory regions.
Differential Revision: https://reviews.llvm.org/D55854
llvm-svn: 349658
the "self.assertEqual(thread.GetStopReason(), lldb.eStopReasonSignal)"
was occasionally failing because the stop reason would come out as
"trace" this happened if we issued the interrupt just as the processed
stopped due to single-stepping over the breakpoint (i.e., the it was not
necessary to send any signal).
Fix this by removing the breakpoint before resuming the process. This
ensures the process can run unobstructed.
After this, the test passed 200 consecutive runs successfully for me,
even while the system was under heavy load.
llvm-svn: 349491
This test was disabled in r326756 as a part of "upstreaming debugserver
support for AVX-512 (zmm register set)". This looks like an error
because both register set and remote stubs are different.
In any case, the test passes now.
llvm-svn: 349485
This test is passing now on linux. The same test is claimed to be flaky
on darwin, so it's possible that's true on linux too. If that's the case
we'll have to skip it here too (or fix it).
I mark the test as not-debug-info-dependent as a drive-by.
llvm-svn: 349482
This re-commits r348592, which was reverted due to a failing test on
macos.
The issue was that I was passing a null pointer for the
"CreateMemoryInstance" callback when registering ObjectFileBreakpad,
which caused crashes when attemping to load modules from memory. The
correct thing to do is to pass a callback which always returns a null
pointer (as breakpad files are never loaded in inferior memory).
It turns out that there is only one test which exercises this code path,
and it's mac-only, so I've create a new test which should run everywhere
(except windows, as one cannot delete an executable which is being run).
Unfortunately, this test still fails on linux for other reasons, but at
least it gives us something to aim for.
The original commit message was:
This patch adds the scaffolding necessary for lldb to recognise symbol
files generated by breakpad. These (textual) files contain just enough
information to be able to produce a backtrace from a crash
dump. This information includes:
- UUID, architecture and name of the module
- line tables
- list of symbols
- unwind information
A minimal breakpad file could look like this:
MODULE Linux x86_64 0000000024B5D199F0F766FFFFFF5DC30 a.out
INFO CODE_ID 00000000B52499D1F0F766FFFFFF5DC3
FILE 0 /tmp/a.c
FUNC 1010 10 0 _start
1010 4 4 0
1014 5 5 0
1019 5 6 0
101e 2 7 0
PUBLIC 1010 0 _start
STACK CFI INIT 1010 10 .cfa: $rsp 8 + .ra: .cfa -8 + ^
STACK CFI 1011 $rbp: .cfa -16 + ^ .cfa: $rsp 16 +
STACK CFI 1014 .cfa: $rbp 16 +
Even though this data would normally be considered "symbol" information,
in the current lldb infrastructure it is assumed every SymbolFile object
is backed by an ObjectFile instance. So, in order to better interoperate
with the rest of the code (particularly symbol vendors).
In this patch I just parse the breakpad header, which is enough to
populate the UUID and architecture fields of the ObjectFile interface.
The rough plan for followup patches is to expose the individual parts of
the breakpad file as ObjectFile "sections", which can then be used by
other parts of the codebase (SymbolFileBreakpad ?) to vend the necessary
information.
Reviewers: clayborg, zturner, lemo, amccarth
Subscribers: mgorny, fedor.sergeev, markmentovai, lldb-commits
Differential Revision: https://reviews.llvm.org/D55214
llvm-svn: 348773
This patch changes the way the reproducer is initialized. Rather than
making changes at run time we now do everything at initialization time.
To make this happen we had to introduce initializer options and their SB
variant. This allows us to tell the initializer that we're running in
reproducer capture/replay mode.
Because of this change we also had to alter our testing strategy. We
cannot reinitialize LLDB when using the dotest infrastructure. Instead
we use lit and invoke two instances of the driver.
Another consequence is that we can no longer enable capture or replay
through commands. This was bound to go away form the beginning, but I
had something in mind where you could enable/disable specific providers.
However this seems like it adds very little value right now so the
corresponding commands were removed.
Finally this change also means you now have to control this through the
driver, for which I replaced --reproducer with --capture and --replay to
differentiate between the two modes.
Differential revision: https://reviews.llvm.org/D55038
llvm-svn: 348152
The test assumes that HW breakpoints are not implemented by the debug
server. Windows doesn't use these and might actually support HW
breakpoints so these tests are expected fail because they don't raise
the expected error.
llvm-svn: 348010
Summary:
This patch fixes the next situation. On Windows clang-cl makes no stub before
the main function, so the main function is located exactly on module entry
point. May be it is the same on other platforms. So consider the following
sequence:
- set a breakpoint on main and stop there;
- try to evaluate expression, which requires a code execution on the debuggee
side. Such an execution always returns to the module entry, and the plan waits
for it there;
- the plan understands that it is complete now and removes its breakpoint. But
the breakpoint site is still there, because we also have a breakpoint on
entry;
- StopInfo analyzes a situation. It sees that we have stopped on the breakpoint
site, and it sees that the breakpoint site has owners, and no one logical
breakpoint is internal (because the plan is already completed and it have
removed its breakpoint);
- StopInfo thinks that it's a user breakpoint and skips it to avoid recursive
computations;
- the program continues.
So in this situation the program continues without a stop right after
the expression evaluation. To avoid this an additional check that
the plan was completed was added.
Reviewers: jingham, zturner, boris.ulasevich
Reviewed by: jingham
Tags: #lldb
Differential Revision: https://reviews.llvm.org/D53761
llvm-svn: 347974
A couple of new tests have been added that use existing class names. This causes failures on Windows if the tests run at the same time and on any platform it results in the logs being overwritten.
llvm-svn: 347717
Those tests were using pexpect and being flaky on some of ours bots.
This patch reimplmeents the tests usinf FileCheck, and it also
extends the test coverage to a few more stop-hook options.
llvm-svn: 347109
Summary:
This commit implements basic DidAttach and DidLaunch for the windows
DynamicLoader plugin which allow us to load shared libraries from the
inferior.
Reviewers: sas, zturner
Reviewed By: zturner
Differential Revision: https://reviews.llvm.org/D54544
llvm-svn: 346994
When debugging read-only memory we cannot use software breakpoint. We
already have support for hardware breakpoints and users can specify them
with `-H`. However, there's no option to force LLDB to use hardware
breakpoints internally, for example while stepping.
This patch adds a setting target.require-hardware-breakpoint that forces
LLDB to always use hardware breakpoints. Because hardware breakpoints
are a limited resource and can fail to resolve, this patch also extends
error handling in thread plans, where breakpoints are used for stepping.
Differential revision: https://reviews.llvm.org/D54221
llvm-svn: 346920
This patch removes the comments grouping header includes. They were
added after running IWYU over the LLDB codebase. However they add little
value, are often outdates and burdensome to maintain.
llvm-svn: 346626
qWatchpointSupportInfo packet correctly.
In GDBRemoteCommunicationClient::GetWatchpointSupportInfo,
if the response to qWatchpointSupportInfo does not
include the 'num' field, then we did not get an answer
we understood, mark this target as not supporting that
packet.
In Target.cpp, rename the very confusingly named
CheckIfWatchpointsExhausted to CheckIfWatchpointsSupported,
and check the error status returned by
Process::GetWatchpointSupportInfo. If we cannot determine
what the number of supported watchpoints are, assume that
they will work. We'll handle the failure
later when we try to create/enable the watchpoint if the
Z2 packet isn't supported.
Add a gdb_remote_client test case.
<rdar://problem/42621432>
llvm-svn: 346561
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345693
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345686
This patch introduces a concept of "frame recognizer" and "recognized frame". This should be an extensible mechanism that retrieves information about special frames based on ABI, arguments or other special properties of that frame, even without source code. A few examples where that could be useful could be 1) objc_exception_throw, where we'd like to get the current exception, 2) terminate_with_reason and extracting the current terminate string, 3) recognizing Objective-C frames and automatically extracting the receiver+selector, or perhaps all arguments (based on selector).
Differential Revision: https://reviews.llvm.org/D44603
llvm-svn: 345678
Add support in ProcessGDBRemote::GetGDBServerRegisterInfo
for recognizing a generic "arm" architecture that will be used if
nothing better is available so that we don't ignore the register
definitions if we didn't already have an architecture set.
Also in ProcessGDBRemote::DoConnectRemote don't set the target
arch unless we have a valid architecture to set it to.
Platform::ConnectProcess will try to get the current target's
architecture, or the default architecture, when creating the
target for the connection to be attempted. If lldb was started
with a target binary, we want to create this target with that
architecture in case the remote gdb stub doesn't supply a
qHostInfo arch.
Add logging to Target::MergeArchitecture.
<rdar://problem/34916465>
llvm-svn: 345106
Greg Clayton