For example, on X86 we emit a sign_extend_vector_inreg from LowerLoad and without sse4.1 this node will need further legalization. Previously this sign_extend_vector_inreg was being custom lowered during DAG legalization instead of vector op legalization.
Unfortunately, this doesn't seem to matter for the output of any existing lit tests.
llvm-svn: 347094
These methods were just wrappers around getNode with additional asserts (identical and repeated 3 times). But getNode already has a switch that can be used to hold these asserts that allows them to be shared for all 3 opcodes. This also enables checking on the places that create these nodes without using the wrappers.
The rest of the patch is just changing all callers to use getNode directly.
llvm-svn: 346087
This patch adds support for expanding vector CTPOP instructions and removes the x86 'bitmath' lowering which replicates the same expansion.
Differential Revision: https://reviews.llvm.org/D53258
llvm-svn: 345869
Add an intrinsic that takes 2 integers and perform saturation subtraction on
them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53783
llvm-svn: 345512
Add vector support to TargetLowering::expandFP_TO_UINT.
This exposes an issue in X86TargetLowering::LowerVSELECT which was assuming that the select mask was the same width as the LHS/RHS ops - as long as the result is a sign splat we can easily sext/trunk this.
llvm-svn: 345473
As suggested on D52965, this patch moves the i64 to f64 UINT_TO_FP expansion code from LegalizeDAG into TargetLowering and makes it available to LegalizeVectorOps as well.
Not only does this help perform X86 lowering as a true vectorization instead of (partially vectorized) scalar conversions, it avoids the HADDPD op from the scalar code which can be slow on most targets.
The AVX512F does have the vcvtusi2sdq scalar operation but we don't unroll to use it as it seems to only help for the v2f64 case - otherwise the unrolling cost will certainly be too high. My feeling is that we should leave it to the vectorizers - and if it generates the vector UINT_TO_FP we should use it.
Differential Revision: https://reviews.llvm.org/D53649
llvm-svn: 345256
Summary:
Changes all uses of minnan/maxnan to minimum/maximum
globally. These names emphasize that the semantic difference between
these operations is more than just NaN-propagation.
Reviewers: arsenm, aheejin, dschuff, javed.absar
Subscribers: jholewinski, sdardis, wdng, sbc100, jgravelle-google, jrtc27, atanasyan, llvm-commits
Differential Revision: https://reviews.llvm.org/D53112
llvm-svn: 345218
As suggested on D53258, this patch shares common CTLZ expansion code between VectorLegalizer and SelectionDAGLegalize by putting it in TargetLowering.
Extension to D53474
llvm-svn: 345060
As suggested on D53258, this patch demonstrates sharing common CTTZ expansion code between VectorLegalizer and SelectionDAGLegalize by putting it in TargetLowering.
I intend to move CTLZ and (scalar) CTPOP over as well and then update D53258 accordingly.
Differential Revision: https://reviews.llvm.org/D53474
llvm-svn: 345039
Add an intrinsic that takes 2 integers and perform unsigned saturation
addition on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53340
llvm-svn: 344971
Introduce new versions that follow the IEEE semantics
to help with legalization that may need quieted inputs.
There are some regressions from inserting unnecessary
canonicalizes when these are matched from fast math
fcmp + select which should be fixed in a future commit.
llvm-svn: 344914
Add an intrinsic that takes 2 integers and perform saturation addition on them.
This is a part of implementing fixed point arithmetic in clang where some of
the more complex operations will be implemented as intrinsics.
Differential Revision: https://reviews.llvm.org/D53053
llvm-svn: 344629
Generalize SelectionDAGLegalize's CTLZ expansion to handle vectors - lets VectorLegalizer::ExpandCTLZ to just pass the expansion on instead of repeating the same codegen.
llvm-svn: 344349
This is where we legalize gather and masked load so this is consistent.
Since these ops are always on vectors I've chosen to go with LegalizeDAG since that's what we do for other vector only ops like BUILD_VECTOR, VECTOR_SHUFFLE, etc. The ScalarizeMaskedMemIntrinsic pass should take care of scalarizing these before SelectionDAG so hopefully we don't need to worry about illegally typed scalar ops being emitted in the legalizing. If we did we would need to do this in LegalizeVectorOps so we could get the second type legalization that runs between LegalizeVectorOps and LegalizeDAG.
llvm-svn: 343947
It was always returning the chain which seems to be the result number of the SDValue in the lit tests we have. But I don't know if that's guaranteed.
llvm-svn: 343933
Previously we replaced the chain use ourself and return the data result. LegalizeVectorOps then detected that we'd done this and assumed the chain had already been handled.
This commit instead returns a MERGE_VALUES node with two results joined from nodes. This allows LegalizeVectorOps to do all the replacements for us without any special casing. The MERGE_VALUES will be removed by DAG combine.
llvm-svn: 343817
When VectorLegalizer::LegalizeOp creates a new SDValue after iterating
over its arguments, we need to refer to the same result number of the
new node that the original value used.
Reviewed by: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D49805
llvm-svn: 337939
Modify ExpandStrictFPOp(...) to handle nodes that have scalar
operands.
Also, add a Strict FMA test and do some other light cleanup in the
Strict FP code.
Differential Revision: https://reviews.llvm.org/D48149
llvm-svn: 334863
Add a helper function to expand constrained FP operations as needed.
Note that the Strict POWI operation is not handled in this patch since
the format is slightly different from the others.
Differential Revision: https://reviews.llvm.org/D47491
llvm-svn: 334603
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
We've been running doxygen with the autobrief option for a couple of
years now. This makes the \brief markers into our comments
redundant. Since they are a visual distraction and we don't want to
encourage more \brief markers in new code either, this patch removes
them all.
Patch produced by
for i in $(git grep -l '\\brief'); do perl -pi -e 's/\\brief //g' $i & done
Differential Revision: https://reviews.llvm.org/D46290
llvm-svn: 331272
Currently EVT is in the IR layer only because of Function.cpp needing a very small piece of the functionality of EVT::getEVTString(). The rest of EVT is used in codegen making CodeGen a better place for it.
The previous code converted a Type* to EVT and then called getEVTString. This was only expected to handle the primitive types from Type*. Since there only a few primitive types, we can just print them as strings directly.
Differential Revision: https://reviews.llvm.org/D45017
llvm-svn: 328806
This is used by llvm tblgen as well as by LLVM Targets, so the only
common place is Support for now. (maybe we need another target for these
sorts of things - but for now I'm at least making them correct & we can
make them better if/when people have strong feelings)
llvm-svn: 328395
ExpandUINT_TO_FLOAT can accept vXi32 or vXi64 inputs, so we need to use a uint64_t shift to generate the 2^(BW/2) constant.
No test case unfortunately as no upstream target uses this, but its affecting a downstream target.
llvm-svn: 325578
This was completely broken, but hopefully fixed by this patch.
In cases where it is needed, a vector with non byte-sized elements is stored
by extracting, zero-extending, shift:ing and or:ing the elements into an
integer of the same width as the vector, which is then stored.
Review: Eli Friedman, Ulrich Weigand
https://reviews.llvm.org/D42100#inline-369520https://bugs.llvm.org/show_bug.cgi?id=35520
llvm-svn: 323042
The code that is supposed to "Round odd types to the next pow of two" seems
broken and as well completely unused (untested). It also seems that
ExpandStore really shouldn't ever change the memory VT, which this in fact
does.
As a first step in fixing the broken handling of vector stores (of irregular
types, e.g. an i1 vector), this code is removed. For discussion, see
https://bugs.llvm.org/show_bug.cgi?id=35520.
Review: Eli Friedman
llvm-svn: 322275
Currently the promotion for these ignores the normal getTypeToPromoteTo and instead just tries to double the element width. This is because the default behavior of getTypeToPromote to just adds 1 to the SimpleVT, which has the affect of increasing the element count while keeping the scalar size the same.
If multiple steps are required to get to a legal operation type, int_to_fp will be promoted multiple times. And fp_to_int will keep trying wider types in a loop until it finds one that works.
getTypeToPromoteTo does have the ability to query a promotion map to get the type and not do the increasing behavior. It seems better to just let the target specify the promotion type in the map explicitly instead of letting the legalizer iterate via widening.
FWIW, it's worth I think for any other vector operations that need to be promoted, we have to specify the type explicitly because the default behavior of getTypeToPromote isn't useful for vectors. The other types of promotion already require either the element count is constant or the total vector width is constant, but neither happens by incrementing the SimpleVT enum.
Differential Revision: https://reviews.llvm.org/D40664
llvm-svn: 321629
If we put in an assertsext/zext here, we're able to generate better truncate code using pack on pre-avx512 targets.
Similar is already done during type legalization. This is the equivalent for op legalization
Differential Revision: https://reviews.llvm.org/D40591
llvm-svn: 319368
The object can't straddle the address space
wrap around, so I think it's OK to assume any
offsets added to the base object pointer can't
overflow. Similar logic already appears to be
applied in SelectionDAGBuilder when lowering
aggregate returns.
llvm-svn: 319272
Previously we had an isel pattern to add the truncate. Instead use Promote to add the truncate to the DAG before isel.
The Promote legalization code had to be updated to prevent an infinite loop if promotion took multiple steps because it wasn't remembering the previously tried value.
llvm-svn: 319259
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
Summary:
Most targets set the action for these nodes to Expand even though there
isn't actually any code for them in ExpandNode. Instead, targets simply
relied on the fact that no code generates these nodes as long as the
nodes aren't legal or custom.
However, generating these nodes can be useful e.g. for divide-by-constant
in wider integer types.
Expand of [US]MUL_LOHI will use MULH[US] when legal or custom, and
a sequence of half-width multiplications otherwise. Promote uses a wider
multiply.
This patch intends to not change the generated code, but indirect effects
are possible since expansions/promotions that were previously done in
DAGCombine may now be done in LegalizeDAG.
See D24822 for a change that actually uses the new expansion.
Reviewers: spatel, bkramer, venkatra, efriedma, hfinkel, ast, nadav, tstellarAMD
Subscribers: arsenm, jyknight, nemanjai, wdng, nhaehnle, llvm-commits
Differential Revision: https://reviews.llvm.org/D24956
llvm-svn: 289050
This patch avoids scalarization of CTLZ by instead expanding to use CTPOP (ref: "Hacker's Delight") when the necessary operations are available.
This also adds the necessary cost models for X86 SSE2 targets (the main beneficiary) to ensure vectorization only happens when its useful.
Differential Revision: https://reviews.llvm.org/D25910
llvm-svn: 286233
Summary:
Instead, we take a single flags arg (a bitset).
Also add a default 0 alignment, and change the order of arguments so the
alignment comes before the flags.
This greatly simplifies many callsites, and fixes a bug in
AMDGPUISelLowering, wherein the order of the args to getLoad was
inverted. It also greatly simplifies the process of adding another flag
to getLoad.
Reviewers: chandlerc, tstellarAMD
Subscribers: jholewinski, arsenm, jyknight, dsanders, nemanjai, llvm-commits
Differential Revision: http://reviews.llvm.org/D22249
llvm-svn: 275592
For the most part this simplifies all callers. There were two places in X86 that needed an explicit makeArrayRef to shorten a statically sized array.
llvm-svn: 274337
For BITREVERSE, bit shifting/masking every bit in a vector element is a very lengthy procedure.
If the input vector type is a whole multiple of bytes wide then we can split this into a BSWAP shuffle stage (to reverse at the byte level) and then a BITREVERSE stage applied to each byte. Most vector capable targets can efficiently BSWAP using shuffles resulting in a considerable reduction in instructions.
With this patch targets would only need to implement a target specific vXi8 BITREVERSE implementation to efficiently reverse most legal vector types.
Differential Revision: http://reviews.llvm.org/D19978
llvm-svn: 269290
Some vector bit operations are promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use a new TLI helper isOperationLegalOrCustomOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268561
Vector bit operations are typically promoted instead of having custom lowering. This patch changes the isOperationLegalOrCustom tests for vector AND/OR operations to use isOperationLegalOrPromote instead, allowing the SSE implementations to stay on the simd unit.
Differential Revision: http://reviews.llvm.org/D19805
llvm-svn: 268504
For the same reason as the corresponding load change.
Note that ExpandStore is completely broken for non-byte sized element
vector stores, but preserve the current broken behavior which has tests
for it. The behavior should be the same, but now introduces a new typed
store that is incorrectly split later rather than doing it directly.
llvm-svn: 264928
On AMDGPU we want to be able to promote i64/f64 loads to v2i32.
If the access is unaligned, this would conclude that since i64 is legal,
it would convert it back to i64 and there is an endless legalization
loop.
Extract the logic for scalarizing the load into a new TargetLowering
function, where this can also replace the custom function AMDGPU
has for this.
llvm-svn: 264927
Generalise the existing SIGN_EXTEND to SIGN_EXTEND_VECTOR_INREG combine to support zero extension as well and get rid of a lot of unnecessary ANY_EXTEND + mask patterns.
Reapplied with a fix for PR26870 (avoid premature use of TargetConstant in ZERO_EXTEND_VECTOR_INREG expansion).
Differential Revision: http://reviews.llvm.org/D17691
llvm-svn: 263159
After much discussion, ending here:
http://lists.llvm.org/pipermail/llvm-commits/Week-of-Mon-20151123/315620.html
it has been decided that, instead of having the vectorizer directly generate
special absdiff and horizontal-add intrinsics, we'll recognize the relevant
reduction patterns during CodeGen. Accordingly, these intrinsics are not needed
(the operations they represent can be pattern matched, as is already done in
some backends). Thus, we're backing these out in favor of the current
development work.
r248483 - Codegen: Fix llvm.*absdiff semantic.
r242546 - [ARM] Use [SU]ABSDIFF nodes instead of intrinsics for VABD/VABA
r242545 - [AArch64] Use [SU]ABSDIFF nodes instead of intrinsics for ABD/ABA
r242409 - [Codegen] Add intrinsics 'absdiff' and corresponding SDNodes for absolute difference operation
llvm-svn: 255387
Patterns were missing for KNL target for <8 x i32>, <8 x float> masked load/store.
This intrinsic comes with all legal types:
<8 x float> @llvm.masked.load.v8f32(<8 x float>* %addr, i32 align, <8 x i1> %mask, <8 x float> %passThru),
but still requires lowering, because VMASKMOVPS, VMASKMOVDQU32 work with 512-bit vectors only.
All data operands should be widened to 512-bit vector.
The mask operand should be widened to v16i1 with zeroes.
Differential Revision: http://reviews.llvm.org/D15265
llvm-svn: 254909
to a simple type when lowering a truncating store of a vector type. In this
case for an EVT we'll return Expand as we should in all of the cases anyhow.
The testcase triggered at the one in VectorLegalizer::LegalizeOp, inspection
found the rest.
llvm-svn: 254061
default: llvm_unreachable("This action is not supported yet!");
-- so I'm adding one to the third switch block, too.
This is a follow-up fix for http://reviews.llvm.org/D13862
llvm-svn: 250830
Summary:
In addition to moving the code over, this patch amends the DIV,REM -> DIVREM
combining to run on all affected nodes at once: if the nodes are converted
to DIVREM one at a time, then the resulting DIVREM may get legalized by the
backend into something target-specific that we won't be able to recognize
and correlate with the remaining nodes.
The motivation is to "prepare terrain" for D13862: when we set DIV and REM
to be legalized to libcalls, instead of the DIVREM, we otherwise lose the
ability to combine them together. To prevent this, we need to take the
DIV,REM -> DIVREM combining out of the lowering stage.
Reviewers: RKSimon, eli.friedman, rengolin
Subscribers: john.brawn, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13733
llvm-svn: 250825
Fixes the overflow case of llvm.*absdiff intrinsic also updats the tests and LangRef.rst accordingly.
Differential Revision: http://reviews.llvm.org/D11678
llvm-svn: 248483
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
The intention of these is to be a corollary to ISD::FMINNUM/FMAXNUM,
differing only on how NaNs are treated. FMINNUM returns the non-NaN
input (when given one NaN and one non-NaN), FMINNAN returns the NaN
input instead.
This patch includes support for scalarizing, widening and splitting
vectors, but not expansion or softening. The reason is that these
should never be needed - FMINNAN nodes are only going to be created
in one place (SDAGBuilder::visitSelect) and there we'll check if the
node is legal or custom. I could preemptively add expand and soften
code, but I'm fairly opposed to adding code I can't test. It's bad
enough I can't create tests with this patch, but at least this code
will be exercised by the ARM and AArch64 backends fairly shortly.
llvm-svn: 244581
This adds new intrinsics "*absdiff" for absolute difference ops to facilitate efficient code generation for "sum of absolute differences" operation.
The patch also contains the introduction of corresponding SDNodes and basic legalization support.Sanity of the generated code is tested on X86.
This is 1st of the three patches.
Patch by Shahid Asghar-ahmad!
llvm-svn: 242409
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241776
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241618
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
This adds new SDNodes for signed/unsigned min/max. These nodes are built from
select/icmp pairs matched at SDAGBuilder stage.
This patch adds the nodes, as well as legalization support and sets them to
be "expand" for all targets.
NFC for now; this will be tested when I switch AArch64 to using these new
nodes.
llvm-svn: 237423
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
For almost all node types, if the target requested custom lowering, and
LowerOperation returned its input, we'd treat the original node as legal. This
did not work, however, for many loads and stores, because they follow
slightly different code paths, and we did not account for the possibility of
LowerOperation returning its input at those call sites.
I think that we now handle this consistently everywhere. At the call sites in
LegalizeDAG, we used to assert in this case, so there's no functional change
for any existing code there. For the call sites in LegalizeVectorOps, this
really only affects whether or not we set Changed = true, but I think makes the
semantics clearer.
No test case here, but it will be covered by an upcoming PowerPC commit adding
QPX support.
llvm-svn: 230332
When expanding a truncating store or extending load using vector extracts or
inserts and scalar stores and loads, we were giving each of these scalar stores
or loads the same alignment as the original vector operation. While this will
often be right (most vector operations, especially those produced by
autovectorization, have the alignment of the underlying scalar type), the
vector operation could certainly have a larger alignment.
No test case (yet); noticed by inspection.
llvm-svn: 230175
The PowerPC backend has long promoted some floating-point vector operations
(such as select) to integer vector operations. Unfortunately, this behavior was
broken by r216555. When using FP_EXTEND/FP_ROUND for promotions, we must check
that both the old and new types are floating-point types. Otherwise, we must
use BITCAST as we did prior to r216555 for everything.
llvm-svn: 228969
type (in addition to the memory type).
The *LoadExt* legalization handling used to only have one type, the
memory type. This forced users to assume that as long as the extload
for the memory type was declared legal, and the result type was legal,
the whole extload was legal.
However, this isn't always the case. For instance, on X86, with AVX,
this is legal:
v4i32 load, zext from v4i8
but this isn't:
v4i64 load, zext from v4i8
Whereas v4i64 is (arguably) legal, even without AVX2.
Note that the same thing was done a while ago for truncstores (r46140),
but I assume no one needed it yet for extloads, so here we go.
Calls to getLoadExtAction were changed to add the value type, found
manually in the surrounding code.
Calls to setLoadExtAction were mechanically changed, by wrapping the
call in a loop, to match previous behavior. The loop iterates over
the MVT subrange corresponding to the memory type (FP vectors, etc...).
I also pulled neighboring setTruncStoreActions into some of the loops;
those shouldn't make a difference, as the additional types are illegal.
(e.g., i128->i1 truncstores on PPC.)
No functional change intended.
Differential Revision: http://reviews.llvm.org/D6532
llvm-svn: 225421
This teaches the AArch64 backend to deal with the operations required
to deal with the operations on v4f16 and v8f16 which are exposed by
NEON intrinsics, plus the add, sub, mul and div operations.
llvm-svn: 216555
Currently when DAGCombine converts loads feeding a switch into a switch of
addresses feeding a load the new load inherits the isInvariant flag of the left
side. This is incorrect since invariant loads can be reordered in cases where it
is illegal to reoarder normal loads.
This patch adds an isInvariant parameter to getExtLoad() and updates all call
sites to pass in the data if they have it or false if they don't. It also
changes the DAGCombine to use that data to make the right decision when
creating the new load.
llvm-svn: 214449
vector operation legalization with support for custom target lowering
and fallback to expand when it fails, and use this to implement sext and
anyext load lowering for x86 in a more principled way.
Previously, the x86 backend relied on a target DAG combine to "combine
away" sextload and extload nodes prior to legalization, or would expand
them during legalization with terrible code. This is particularly
problematic because the DAG combine relies on running over non-canonical
DAG nodes at just the right time to match several common and important
patterns. It used a combine rather than lowering because we didn't have
good lowering support, and to expose some tricks being employed to more
combine phases.
With this change it becomes a proper lowering operation, the backend
marks that it can lower these nodes, and I've added support for handling
the canonical forms that don't have direct legal representations such as
sextload of a v4i8 -> v4i64 on AVX1. With this change, our test cases
for this behavior continue to pass even after the DAG combiner beigns
running more systematically over every node.
There is some noise caused by this in the test suite where we actually
use vector extends instead of subregister extraction. This doesn't
really seem like the right thing to do, but is unlikely to be a critical
regression. We do regress in one case where by lowering to the
target-specific patterns early we were able to combine away extraneous
legal math nodes. However, this regression is completely addressed by
switching to a widening based legalization which is what I'm working
toward anyways, so I've just switched the test to that mode.
Differential Revision: http://reviews.llvm.org/D4654
llvm-svn: 213897
In order to enable the preservation of noalias function parameter information
after inlining, and the representation of block-level __restrict__ pointer
information (etc.), additional kinds of aliasing metadata will be introduced.
This metadata needs to be carried around in AliasAnalysis::Location objects
(and MMOs at the SDAG level), and so we need to generalize the current scheme
(which is hard-coded to just one TBAA MDNode*).
This commit introduces only the necessary refactoring to allow for the
introduction of other aliasing metadata types, but does not actually introduce
any (that will come in a follow-up commit). What it does introduce is a new
AAMDNodes structure to hold all of the aliasing metadata nodes associated with
a particular memory-accessing instruction, and uses that structure instead of
the raw MDNode* in AliasAnalysis::Location, etc.
No functionality change intended.
llvm-svn: 213859
Craig Topper