Disassembly currently begins from addresses obtained from the objects
symbol table. For ELF, add the dynamic symbols to the list if no
static symbols are available so that we can more successfully
disassemble stripped binaries.
Differential Revision: https://reviews.llvm.org/D29632
llvm-svn: 294430
DWARF info contains info about the line number at which a function starts (DW_AT_decl_line).
This patch creates a function to look up the start line number for a function, and returns it in
DILineInfo when looking up debug info for a particular address.
Patch by Simon Que!
Reviewed By: dblaikie
Differential Revision: https://reviews.llvm.org/D27962
llvm-svn: 294231
which caused it to not disassemble the bytes a the start of the section if
the section had symbols and the first symbol was not at the start of the
section.
rdar://30143243
llvm-svn: 294212
Summary:
This is necessary to get stats from the ThinLink printed before the
early exit when compiling in a distributed build.
Reviewers: mehdi_amini
Subscribers: Prazek, llvm-commits
Differential Revision: https://reviews.llvm.org/D29461
llvm-svn: 293908
Summary:
This change implements the instrumentation map loading library which can
understand both YAML-defined instrumentation maps, and ELF 64-bit object
files that have the XRay instrumentation map section. We break it out
into a library on its own to allow for other applications to deal with
the XRay instrumentation map defined in XRay-instrumented binaries.
This type provides both raw access to the logical representation of the
instrumentation map entries as well as higher level functions for
converting a function ID into a function address.
At this point we only support ELF64 binaries and YAML-defined XRay
instrumentation maps. Future changes should extend this to support
32-bit ELF binaries, as well as other binary formats (like MachO).
As part of this change we also migrate all uses of the extraction logic
that used to be defined in tools/llvm-xray/ to use this new type and
interface for loading from files. We also remove the flag from the
`llvm-xray` tool that required users to specify the type of the
instrumentation map file being provided to instead make the library
auto-detect the file type.
Reviewers: dblaikie
Subscribers: mgorny, varno, llvm-commits
Differential Revision: https://reviews.llvm.org/D29319
llvm-svn: 293721
without symbols that makes calls through a symbol stub which were not
correctly being annotated with “## symbol stub for: _foo”.
Just adds the same parameters for getting the annotations from
DisAsm->getInstruction() and passing them to IP->printInst() from the
code above when boolean variable symbolTableWorked was true.
rdar://29791952
llvm-svn: 293662
Create a WasmDumper subclass of ObjDumper to support Webassembly binary
files.
Patch by Sam Clegg
Differential Revision: https://reviews.llvm.org/D27355
llvm-svn: 293569
To better match the old darwin otool(1) behavior, when llvm-obdump(1) is used
with the -macho option and the input file is not an object file simply print
the file name and this message:
foo: is not an object file
and continue on to process other input files. Also in this case don’t exit
non-zero. This should help in some OSS projects' with autoconf scripts
that are expecting the old darwin otool(1) behavior.
rdar://26828015
llvm-svn: 293547
Mach-O files don’t have size information about the symbols in the object file
format unlike ELF.
Also add the part of the fix to llvm-nm that was missed with r290001 so
-arch armv7m works.
rdar://25681018
llvm-svn: 293099
Summary:
A patch to enable the llvm-xray graph subcommand to color edges and
vertices based on statistics and to annotate vertices with statistics.
Depends on D27243
Reviewers: dblaikie, dberris
Reviewed By: dberris
Subscribers: mgorny, llvm-commits
Differential Revision: https://reviews.llvm.org/D28225
llvm-svn: 293031
for CPU_SUBTYPE_ARM_V7S and CPU_SUBTYPE_ARM_V7K.
For these two cpusubtypes they should default to a cortex-a7 CPU
to give proper disassembly without a -mcpu= flag.
rdar://27431703
llvm-svn: 292993
in llvm-objdump for Mach-O files add the printing of the
x86_thread_state32_t in the same format as
otool-classic(1) on darwin.
To do this the 32-bit x86 general tread state
needed to be defined in include/llvm/Support/MachO.h .
rdar://30110111
llvm-svn: 292829
Summary:
Add a new load command LC_BUILD_VERSION. It is a generic version of
LC_*_VERSION_MIN load_command used on Apple platforms. Instead of having
a seperate load command for each platform, LC_BUILD_VERSION is recording
platform info as an enum. It also records SDK version, min_os, and tools
that used to build the binary.
rdar://problem/29781291
Reviewers: enderby
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D29044
llvm-svn: 292824
Add the `--strip-underscore` option to llvm-cxxfilt to strip the leading
underscore. This is useful for when dealing with targets which add a
leading underscore.
llvm-svn: 292759
Summary:
Allow non-ODR weak/linkonce non-prevailing copies to be marked
as available_externally in the index. Add support for dropping these to
declarations in the backend.
Reviewers: mehdi_amini, pcc
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D28806
llvm-svn: 292656
By default c++filt demangles functions, though you can optionally pass
`-t` to have it decode types as well, behaving nearly identical to
`__cxa_demangle`. Add support for this mode.
llvm-svn: 292576
It describes a region of arbitrary data included in a Mach-O file.
Its initial use is to record extra data in MH_CORE files.
rdar://30001545
rdar://30001731
llvm-svn: 292500
c++filt does not attempt to demangle symbols which do not match its
expected format. This means that the symbol must start with _Z or ___Z
(block invocation function extension). Any other symbols are returned
as is. Note that this is different from the behaviour of __cxa_demangle
which will demangle fragments.
llvm-svn: 292467
An ELFObjectFile can now create SubtargetFeatures from the available
ARM build attributes, in a similar manner to MIPS. I've moved the
MIPS code into its own function and the ARM handler also has a
separate function.
Differential Revision: https://reviews.llvm.org/D28291
llvm-svn: 292403
Enable an ELFObjectFile to read the its arm build attributes to
produce a target triple with a specific ARM architecture.
llvm-objdump now uses this functionality to automatically produce
a more accurate target.
Differential Revision: https://reviews.llvm.org/D28769
llvm-svn: 292366
Summary:
Tests under tools/llvm-objdump should not use inputs from Object. Copied the
required inputs and aligned the new tests to be more consistent with the existing
tests in this respect.
Reviewers: ioeric
Reviewed By: ioeric
Subscribers: davide, djasper, cfe-commits
Differential Revision: https://reviews.llvm.org/D28799
llvm-svn: 292222
Here we define the `graph` subcommand which generates a graph from the function
call information and uses it to present the call information graphically with
additional annotations.
Reviewers: dblaikie, dberris
Differential Revision: https://reviews.llvm.org/D27243
llvm-svn: 292156
Summary:
Revert [ARM] Fix ubig32_t read in ARMAttributeParser
Now using support functions to read data instead of trying to
perform casts.
===========================================================
Revert [ARM] Enable objdump to construct triple for ARM
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Subscribers: llvm-commits, samparker, aemerson, mgorny
Differential Revision: https://reviews.llvm.org/D28683
llvm-svn: 291911
Now that The ARMAttributeParser has been moved into the library,
it has been modified so that it can parse the attributes without
printing them and stores them in a map. ELFObjectFile now queries
the attributes to fill out the architecture details of a provided
triple for 'arm' and 'thumb' targets. llvm-objdump uses this new
functionality.
Differential Revision: https://reviews.llvm.org/D28281
llvm-svn: 291898
Summary:
This is the third of a multi-part change to implement subcommands for
the `llvm-xray` tool.
Here we define the `account` subcommand which does simple function call
accounting, generating basic statistics on function calls we find in an
XRay log/trace. We support text output and csv output for this
subcommand.
This change also supports sorting, summing, and filtering the top N
results.
Part of this tool will later be turned into a library that could be used
for basic function call accounting.
Depends on D24376.
Reviewers: dblaikie, echristo
Subscribers: mehdi_amini, dberris, beanz, llvm-commits
Differential Revision: https://reviews.llvm.org/D24377
llvm-svn: 291749
Summary:
In this change we move the definition of the log reading routines from
the tools directory in LLVM to {include/llvm,lib}/XRay. We improve the
documentation a little bit for the publicly accessible headers, and
adjust the top-matter. This also leads to some refactoring and cleanup
in the tooling code.
In particular, we do the following:
- Rename the class from LogReader to Trace, as it better represents
the logical set of records as opposed to a log.
- Use file type detection instead of asking the user to say what
format the input file is. This allows us to keep the interface
simple and encapsulate the logic of loading the data appropriately.
In future changes we increase the API surface and write dedicated unit
tests for the XRay library.
Depends on D24376.
Reviewers: dblaikie, echristo
Subscribers: mehdi_amini, mgorny, llvm-commits, varno
Differential Revision: https://reviews.llvm.org/D28345
llvm-svn: 291652
Following the similar change to lit configuration, ensure that all CMake
booleans are canonicalized to 0/1 when being passed to llvm-config. This
fixes the incorrect interpretation of values when user passes another
value than the ON/OFF, and simplifies the code by removing unnecessary
string matching.
Furthermore, the code for --has-rtti and --has-global-isel has been
modified to print consistent values indepdently of the boolean used by
passed by the user to CMake. Sadly, the code already implicitly used
different values for the two (YES/NO for --has-rtti, ON/OFF for
--has-global-isel).
Include tests for all booleans and multi-value options in llvm-config.
Differential Revision: https://reviews.llvm.org/D28366
llvm-svn: 291593
This is the second part of a multi-part change to define additional
subcommands to the `llvm-xray` tool.
This change defines a conversion subcommand to take XRay log files, and
turns them from one format to another (binary or YAML). This currently
only supports the first version of the log file format, defined in the
compiler-rt runtime.
Depends on D21987.
Reviewers: dblaikie, echristo
Subscribers: mehdi_amini, dberris, beanz, llvm-commits
Differential Revision: https://reviews.llvm.org/D24376
llvm-svn: 291529
Don't print a line multiple times, each for different inlining contexts, if
nothing happened in any context. This prevents situations like this:
[[
> main:
65 | if ((i * ni + j) % 20 == 0) fprintf
> print_array:
65 | if ((i * ni + j) % 20 == 0) fprintf
]]
which could happen if different optimizations were missed in different inlining
contexts.
llvm-svn: 291361
Modify the --system-libs option in llvm-config to print system libs only
when using static linking. The system libraries are irrelevant when
linking to a shared library since the library has appropriate library
dependencies embedded.
Modify the --system-libs test appropriately to force static linking, and
disable it if static libs are not available (i.e. BUILD_SHARED_LIBS is
enabled).
Differential Revision: https://reviews.llvm.org/D27805
llvm-svn: 291285
Diana Picus