This changes the definition of t2DoLoopStart from
t2DoLoopStart rGPR
to
GPRlr = t2DoLoopStart rGPR
This will hopefully mean that low overhead loops are more tied together,
and we can more reliably generate loops without reverting or being at
the whims of the register allocator.
This is a fairly simple change in itself, but leads to a number of other
required alterations.
- The hardware loop pass, if UsePhi is set, now generates loops of the
form:
%start = llvm.start.loop.iterations(%N)
loop:
%p = phi [%start], [%dec]
%dec = llvm.loop.decrement.reg(%p, 1)
%c = icmp ne %dec, 0
br %c, loop, exit
- For this a new llvm.start.loop.iterations intrinsic was added, identical
to llvm.set.loop.iterations but produces a value as seen above, gluing
the loop together more through def-use chains.
- This new instrinsic conceptually produces the same output as input,
which is taught to SCEV so that the checks in MVETailPredication are not
affected.
- Some minor changes are needed to the ARMLowOverheadLoop pass, but it has
been left mostly as before. We should now more reliably be able to tell
that the t2DoLoopStart is correct without having to prove it, but
t2WhileLoopStart and tail-predicated loops will remain the same.
- And all the tests have been updated. There are a lot of them!
This patch on it's own might cause more trouble that it helps, with more
tail-predicated loops being reverted, but some additional patches can
hopefully improve upon that to get to something that is better overall.
Differential Revision: https://reviews.llvm.org/D89881
This patch adds the llvm.loop.mustprogress loop metadata. This is to be
added to loops where the frontend language requires that the loop makes
observable interactions with the environment. This is the loop-level
equivalent to the function attribute `mustprogress` defined in D86233.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D88464
The neutral value is -0.0, not 0.0. This doesn't matter for "fast"
reductions due to nsz, but does matter for reassoc-only and seq
reductions.
Change tests to mostly use -0.0 where the neutral value was intended,
and add some additional test coverage in some places. Also update
LangRef to use the right value.
If `null_pointer_is_valid` is present, `dereferenceable` does not imply
`nonnull`, make it clear.
Came up in D17993.
Reviewed By: aqjune
Differential Revision: https://reviews.llvm.org/D89417
This change introduces a GC parseable lowering for element atomic
memcpy/memmove intrinsics. This way runtime can provide an
implementation which can take a safepoint during copy operation.
See "GC-parseable element atomic memcpy/memmove" thread on llvm-dev
for the background and details:
https://groups.google.com/g/llvm-dev/c/NnENHzmX-b8/m/3PyN8Y2pCAAJ
Differential Revision: https://reviews.llvm.org/D88861
It's currently ambiguous in IR whether the source language explicitly
did not want a stack a stack protector (in C, via function attribute
no_stack_protector) or doesn't care for any given function.
It's common for code that manipulates the stack via inline assembly or
that has to set up its own stack canary (such as the Linux kernel) would
like to avoid stack protectors in certain functions. In this case, we've
been bitten by numerous bugs where a callee with a stack protector is
inlined into an __attribute__((__no_stack_protector__)) caller, which
generally breaks the caller's assumptions about not having a stack
protector. LTO exacerbates the issue.
While developers can avoid this by putting all no_stack_protector
functions in one translation unit together and compiling those with
-fno-stack-protector, it's generally not very ergonomic or as
ergonomic as a function attribute, and still doesn't work for LTO. See also:
https://lore.kernel.org/linux-pm/20200915172658.1432732-1-rkir@google.com/https://lore.kernel.org/lkml/20200918201436.2932360-30-samitolvanen@google.com/T/#u
Typically, when inlining a callee into a caller, the caller will be
upgraded in its level of stack protection (see adjustCallerSSPLevel()).
By adding an explicit attribute in the IR when the function attribute is
used in the source language, we can now identify such cases and prevent
inlining. Block inlining when the callee and caller differ in the case that one
contains `nossp` when the other has `ssp`, `sspstrong`, or `sspreq`.
Fixes pr/47479.
Reviewed By: void
Differential Revision: https://reviews.llvm.org/D87956
LLVM IR currently assumes some form of forward progress. This form is
not explicitly defined anywhere, and is the cause of miscompilations
in most languages that are not C++11 or later. This implicit forward progress
guarantee can not be opted out of on a function level nor on a loop
level. Languages such as C (C11 and later), C++ (pre-C++11), and Rust
have different forward progress requirements and this needs to be
evident in the IR.
Specifically, C11 and onwards (6.8.5, Paragraph 6) states that "An
iteration statement whose controlling expression is not a constant
expression, that performs no input/output operations, does not access
volatile objects, and performs no synchronization or atomic operations
in its body, controlling expression, or (in the case of for statement)
its expression-3, may be assumed by the implementation to terminate."
C++11 and onwards does not have this assumption, and instead assumes
that every thread must make progress as defined in [intro.progress] when
it comes to scheduling.
This was initially brought up in [0] as a bug, a solution was presented
in [1] which is the current workaround, and the predecessor to this
change was [2].
After defining a notion of forward progress for IR, there are two
options to address this:
1) Set the default to assuming Forward Progress and provide an opt-out for functions and an opt-in for loops.
2) Set the default to not assuming Forward Progress and provide an opt-in for functions, and an opt-in for loops.
Option 2) has been selected because only C++11 and onwards have a
forward progress requirement and it makes sense for them to opt-into it
via the defined `mustprogress` function attribute. The `mustprogress`
function attribute indicates that the function is required to make
forward progress as defined. This is sharply in contrast to the status
quo where this is implicitly assumed. In addition, `willreturn` implies `mustprogress`.
The background for why this definition was chosen is in [3] and for why
the option was chosen is in [4] and the corresponding thread(s). The implementation is in D85393, the
clang patch is in D86841, the LoopDeletion patch is in D86844, the
Inliner patches are in D87180 and D87262, and there will be more
incoming.
[0] https://bugs.llvm.org/show_bug.cgi?id=965#c25
[1] https://lists.llvm.org/pipermail/llvm-dev/2017-October/118558.html
[2] https://reviews.llvm.org/D65718
[3] https://lists.llvm.org/pipermail/llvm-dev/2020-September/144919.html
[4] https://lists.llvm.org/pipermail/llvm-dev/2020-September/145023.html
Reviewed By: jdoerfert, efriedma, nikic
Differential Revision: https://reviews.llvm.org/D86233
The langref description for llvm.test.set.loop.iterations.* were
missing the i1 return type.
Differential Revision: https://reviews.llvm.org/D89564
Patch by: Janek van Oirschot
This patch adds metadata !noundef and makes load instructions can optionally have it.
A load with !noundef always return a well-defined value (has no undef bit or isn't poison).
If the loaded value isn't well defined, the behavior is undefined.
This metadata can be used to encode the assumption from C/C++ that certain reads of variables should have well-defined values.
It is helpful for optimizing freeze instructions away, because freeze can be removed when its operand has well-defined value, and showing that a load from arbitrary location is well-defined is usually hard otherwise.
The same information can be encoded with llvm.assume with operand bundle; using metadata is chosen because I wasn't sure whether code motion can be freely done when llvm.assume is inserted from clang instead.
The existing codebase already is stripping unknown metadata when doing code motion, so using metadata is UB-safe as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D89050
LLVM rejects DWARF operator DW_OP_over. This DWARF operator is needed
for Flang to support assumed rank array.
Summary:
Currently LLVM rejects DWARF operator DW_OP_over. Below error is
produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151, 20, 16, 48, 30, 35, 80, 34, 6)
warning: ignoring invalid debug info in over.ll
[..]
There were some parts missing in support of this operator, which are
now completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89208
Add some minimal documentation for DILabel, originally introduced in
D45024. Update the name and semantics of the `variables:` field in the
documentation for `DISubprogram`; the field is now called
`retainedNodes:` and is a heterogeneous list of `DILocalVariable` and
`DILabel`.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89082
This patch adds support for DWARF attribute DW_AT_rank.
Summary:
Fortran assumed rank arrays have dynamic rank. DWARF attribute
DW_AT_rank is needed to support that.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D89141
Motivated by D88183, this seeks to clarify the current loop nomenclature with added illustrations, examples for possibly unexpected situations (infinite loops not part of the "parent" loop, logical loops sharing the same header, ...), and clarification on what other sources may consider a loop. The current document also has multiple errors that are fixed here.
Some selected errors:
* Loops a defined as strongly-connected components. A component a partition of all nodes, i.e. a subloop can never be a component. That is, the document as it currently is only covers top-level loops, even it also uses the term SCC for subloops.
* "a block can be the header of two separate loops at the same time" (it is considered a single loop by LoopInfo)
* "execute before some interesting event happens" (some interesting event is not well-defined)
Reviewed By: baziotis, Whitney
Differential Revision: https://reviews.llvm.org/D88408
This reverts commit 55c4ff91bd.
Issues were introduced as discussed in https://reviews.llvm.org/D88241
where this change made previous bugs in the linker and BitCodeWriter
visible.
This is a patch to LangRef that clarifies the behavior of load/store/memset/memcpy/memmove when the pointers or sizes are not well-defined
as well.
MSan detects a case when e.g., only lower bits of address are garbage when `-msan-check-access-address` is enabled, and it does not directly conflict with this patch because a C program should not use a pointer with undef bits and reasonable optimizations do not convert a well-defined pointer into a pointer with undef bits.
This patch contains a definition of a well-defined value as well.
Reviewed By: jdoerfert
Differential Revision: https://reviews.llvm.org/D87994
Make the corresponding change that was made for byval in
b7141207a4. Like byval, this requires a
bulk update of the test IR tests to include the type before this can
be mandatory.
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/140729.html
This is hopefully the final remaining showstopper before we can remove
the 'experimental' from the reduction intrinsics.
No behavior was specified for the FP min/max reductions, so we have a
mess of different interpretations.
There are a few potential options for the semantics of these max/min ops.
I think this is the simplest based on current behavior/implementation:
make the reductions inherit from the existing llvm.maxnum/minnum intrinsics.
These correspond to libm fmax/fmin, and those are similar to the (now
deprecated?) IEEE-754 maxNum/minNum functions (NaNs are treated as missing
data). So the default expansion creates calls to libm functions.
Another option would be to inherit from llvm.maximum/minimum (NaNs propagate),
but most targets just crash in codegen when given those nodes because no
default expansion was ever implemented AFAICT.
We could also just assume 'nnan' semantics by default (we are already
assuming 'nsz' semantics in the maxnum/minnum intrinsics), but some targets
(AArch64, PowerPC) support the more defined behavior, so it doesn't make much
sense to not allow a tighter spec. Fast-math-flags (nnan) can be used to
loosen the semantics.
(Note that D67507 was proposed to update the LangRef to acknowledge the more
recent IEEE-754 2019 standard, but that patch seems to have stalled. If we do
update based on the new standard, the reduction instructions can seamlessly
inherit from whatever updates are made to the max/min intrinsics.)
x86 sees a regression here on 'nnan' tests because we have underlying,
longstanding bugs in FMF creation/propagation. Those need to be fixed apart
from this change (for example: https://llvm.org/PR35538). The expansion
sequence before this patch may not have been correct.
Differential Revision: https://reviews.llvm.org/D87391
This adjusts the description of `llvm.memcpy` to also allow operands
to be equal. This is in line with what Clang currently expects.
This change is intended to be temporary and followed by re-introduce
a variant with the non-overlapping guarantee for cases where we can
actually ensure that property in the front-end.
See the links below for more details:
http://lists.llvm.org/pipermail/cfe-dev/2020-August/066614.html
and PR11763.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D86815
The wording before this patch applies to llvm.mem.parallel_loop_access, not access groups.
Reviewed By: mppf, hfinkel
Differential Revision: https://reviews.llvm.org/D83781
This patch makes LangRef be explicit about the value of padding when storing an aggregate.
It states that when an aggregate is stored into memory, padding is filled with undef.
Here is a clue that supports this change (edited to reflect the discussion from llvm-dev):
- IPSCCP ignores padding and directly stores a constant aggregate if possible. It loses the data stored in the padding. https://godbolt.org/z/xzenYs Memcpyopt ignores (the preexisting value of) padding when copying an aggregate or storing a constant: https://godbolt.org/z/hY6ndd / https://godbolt.org/z/3WMP5a
The two items below are not relevant with this patch because Clang lowers load/store of individual field of struct into load/stores of the corresponding pointer with a primitive type. Also, when copy is needed, it uses memcpy instead of load/store of an aggregate, as discussed in the llvm-dev. However, this patch is still valid (as discussed) because it is needed to explain the two optimizations above.
- According to C17, the value of padding bytes when storing values in structures or unions is unspecified.
- I updated Alive2 and it did not find any problematic transformation from LLVM unit tests and while running translation validation of a few C programs.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D86189
We had already specified that second argument `n` of this intrinsic is `n > 0`,
but now add to this that the result is a poison value if this is not the case.
Differential Revision: https://reviews.llvm.org/D86637
According to the current LangRef, Memset/memcpy/memmove can take a
null/dangling pointer if the size is zero.
(Relevant thread: http://lists.llvm.org/pipermail/llvm-dev/2017-July/115665.html )
This patch expands it and allows the functions to take undef/poison pointers
too.
This required the updates in the align attribute since it isn't specified
what is the alignment of undef/poison pointers.
This patch states that their alignment is 1.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D86643
A first version of get.active.lane.mask was committed in rG7fb8a40e5220. One of
the main purposes and uses of this intrinsic is to communicate information from
the middle-end to the back-end, but its current definition and semantics make
this actually very difficult. The intrinsic was defined as:
@llvm.get.active.lane.mask(%IV, %BTC)
where %BTC is the Backedge-Taken Count (variable names are different in the
LangRef spec). This allows to implicitly communicate the loop tripcount, which
can be reconstructed by calculating BTC + 1. But it has been very difficult to
prove that calculating BTC + 1 is safe and doesn't overflow. We need
complicated range and SCEV analysis, and thus the problem is that this
intrinsic isn't really doing what it was supposed to solve. Examples of the
overflow checks that are required in the (ARM) back-end are D79175 and D86074,
which aren't even complete/correct yet.
To solve this problem, we are revising the definitions/semantics for
get.active.lane.mask to avoid all the complicated overflow analysis. This means
that instead of communicating the BTC, we are now using the loop tripcount. Now
using LangRef's variable names, its semantics is changed from:
icmp ule (%base + i), %n
to:
icmp ult (%base + i), %n
with %n > 0 and corresponding to the loop tripcount. The intrinsic signature
remains the same.
Differential Revision: https://reviews.llvm.org/D86147
(Forgot to land this a couple of weeks back.)
In a recent series of changes, I've introduced support for using the respective operand bundle kinds on the statepoint. At the moment, code supports either/or, but there's no need to keep the old support around. For the moment, I am simply changing the specification and verifier to require zero length argument sets in the intrinsic.
The intrinsic itself is experimental. Given that, there's no forward serialization needed. The in tree uses and generation have already been updated to use the new operand bundle based forms, the only folks broken by the change will be those with frontends generating statepoints directly and the updates should be easy.
Why not go ahead and just remove the arguments entirely? Well, I plan to. But while working on this I've found that almost all of the arguments to the statepoint can be expressed via operand bundles or attributes. Given that, I'm planning a radical simplification of the arguments and figured I'd do one update not several small ones.
Differential Revision: https://reviews.llvm.org/D80892
Summary:
This support is needed for the Fortran array variables with pointer/allocatable
attribute. This support enables debugger to identify the status of variable
whether that is currently allocated/associated.
for pointer array (before allocation/association)
without DW_AT_associated
(gdb) pt ptr
type = integer (140737345375288:140737354129776)
(gdb) p ptr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_associated
(gdb) pt ptr
type = integer (:)
(gdb) p ptr
$1 = <not associated>
for allocatable array (before allocation)
without DW_AT_allocated
(gdb) pt arr
type = integer (140737345375288:140737354129776)
(gdb) p arr
value requires 35017956 bytes, which is more than max-value-size
with DW_AT_allocated
(gdb) pt arr
type = integer, allocatable (:)
(gdb) p arr
$1 = <not allocated>
Testing
- unit test cases added
- check-llvm
- check-debuginfo
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83544
This allows tracking the in-memory type of a pointer argument to a
function for ABI purposes. This is essentially a stripped down version
of byval to remove some of the stack-copy implications in its
definition.
This includes the base IR changes, and some tests for places where it
should be treated similarly to byval. Codegen support will be in a
future patch.
My original attempt at solving some of these problems was to repurpose
byval with a different address space from the stack. However, it is
technically permitted for the callee to introduce a write to the
argument, although nothing does this in reality. There is also talk of
removing and replacing the byval attribute, so a new attribute would
need to take its place anyway.
This is intended avoid some optimization issues with the current
handling of aggregate arguments, as well as fixes inflexibilty in how
frontends can specify the kernel ABI. The most honest representation
of the amdgpu_kernel convention is to expose all kernel arguments as
loads from constant memory. Today, these are raw, SSA Argument values
and codegen is responsible for turning these into loads.
Background:
There currently isn't a satisfactory way to represent how arguments
for the amdgpu_kernel calling convention are passed. In reality,
arguments are passed in a single, flat, constant memory buffer
implicitly passed to the function. It is also illegal to call this
function in the IR, and this is only ever invoked by a driver of some
kind.
It does not make sense to have a stack passed parameter in this
context as is implied by byval. It is never valid to write to the
kernel arguments, as this would corrupt the inputs seen by other
dispatches of the kernel. These argumets are also not in the same
address space as the stack, so a copy is needed to an alloca. From a
source C-like language, the kernel parameters are invisible.
Semantically, a copy is always required from the constant argument
memory to a mutable variable.
The current clang calling convention lowering emits raw values,
including aggregates into the function argument list, since using
byval would not make sense. This has some unfortunate consequences for
the optimizer. In the aggregate case, we end up with an aggregate
store to alloca, which both SROA and instcombine turn into a store of
each aggregate field. The optimizer never pieces this back together to
see that this is really just a copy from constant memory, so we end up
stuck with expensive stack usage.
This also means the backend dictates the alignment of arguments, and
arbitrarily picks the LLVM IR ABI type alignment. By allowing an
explicit alignment, frontends can make better decisions. For example,
there's real no advantage to an aligment higher than 4, so a frontend
could choose to compact the argument layout. Similarly, there is a
high penalty to using an alignment lower than 4, so a frontend could
opt into more padding for small arguments.
Another design consideration is when it is appropriate to expose the
fact that these arguments are all really passed in adjacent
memory. Currently we have a late IR optimization pass in codegen to
rewrite the kernel argument values into explicit loads to enable
vectorization. In most programs, unrelated argument loads can be
merged together. However, exposing this property directly from the
frontend has some disadvantages. We still need a way to track the
original argument sizes and alignments to report to the driver. I find
using some side-channel, metadata mechanism to track this
unappealing. If the kernel arguments were exposed as a single buffer
to begin with, alias analysis would be unaware that the padding bits
betewen arguments are meaningless. Another family of problems is there
are still some gaps in replacing all of the available parameter
attributes with metadata equivalents once lowered to loads.
The immediate plan is to start using this new attribute to handle all
aggregate argumets for kernels. Long term, it makes sense to migrate
all kernel arguments, including scalars, to be passed indirectly in
the same manner.
Additional context is in D79744.
Make explicit that freeze does not touch paddings of an aggregate.
(Relevant comment: https://reviews.llvm.org/D83752#2152550)
This implies that `v = freeze(load p); store v, q` may still leave undef bits
or poison in memory if `v` is an aggregate, but it still happens for
non-byte integers such as i1.
Differential Revision: https://reviews.llvm.org/D83927
Some of the system registers readable on AArch64 and ARM platforms
return different values with each read (for example a timer counter),
these shouldn't be hoisted outside loops or otherwise interfered with,
but the normal @llvm.read_register intrinsic is only considered to read
memory.
This introduces a separate @llvm.read_volatile_register intrinsic and
maps all system-registers on ARM platforms to use it for the
__builtin_arm_rsr calls. Registers declared with asm("r9") or similar
are unaffected.
This changes the matrix load/store intrinsic definitions to load/store from/to
a pointer, and not from/to a pointer to a vector, as discussed in D83477.
This also includes the recommit of "[Matrix] Tighten LangRef definitions and
Verifier checks" which adds improved language reference descriptions of the
matrix intrinsics and verifier checks.
Differential Revision: https://reviews.llvm.org/D83785
Loop metadata nodes do not adhere to the documented property:
(a) LoopIDs are not unique: Any pass that duplicates IR will do it
including its metadata (e.g. LoopVersioning) such that multiple
loops are linked with the same LoopID. There is even a test case
(Transforms/LoopUnroll/unroll-pragmas-disabled.ll) for multiple
loops with the same LoopID.
(b) LoopIDs are not persistent: Adding or removing an item from a LoopID
can only be done by creating a new MDNode and assigning it to the
loop's branch(es). Passes such as LoopUnroll (llvm.loop.unroll.disable)
and LoopVectorize (llvm.loop.isvectorized) use this to mark loops to
not be transformed multiple times or to avoid that a LoopVersioned
original loop is transformed.
Update the documentation according to how llvm.loop is used in practice.
Differential Revision: https://reviews.llvm.org/D55290
This tightens the matrix intrinsic definitions in LLVM LangRef and adds
correspondings checks to the IR Verifier.
Differential Revision: https://reviews.llvm.org/D83477
fadd (fma A, B, (fmul C, D)), E --> fma A, B, (fma C, D, E)
This is only allowed when "reassoc" is present on the fadd.
As discussed in D80801, this transform goes beyond
what is allowed by "contract" FMF (-ffp-contract=fast).
That is because we are fusing the trailing add of 'E' with a
multiply, but without "reassoc", the code mandates that the
products A*B and C*D are added together before adding in 'E'.
I've added this example to the LangRef to try to clarify the
meaning of "contract". If that seems reasonable, we should
probably do something similar for the clang docs because
there does not appear to be any formal spec for the behavior
of -ffp-contract=fast.
Differential Revision: https://reviews.llvm.org/D82499
LLVM currently does not require function parameters or return values
to be fully initialized, and does not care if they are poison. This can
be useful if the frontend ABI makes no such demands, but may prevent
helpful backend transformations in case they do. Specifically, the C
and C++ languages require all scalar function operands to be fully
determined.
Introducing this attribute is of particular use to MemorySanitizer
today, although other transformations may benefit from it as well.
We can modify MemorySanitizer instrumentation to provide modest (17%)
space savings where `frozen` is present.
This commit only adds the attribute to the Language Reference, and
the actual implementation of the attribute will follow in a separate
commit.
Differential Revision: https://reviews.llvm.org/D82316
This cleans up the stack allocated by a @llvm.call.preallocated.setup.
Should either call the teardown or the preallocated call to clean up the
stack. Calling both is UB.
Add LangRef.
Add verifier check that the token argument is a @llvm.call.preallocated.setup.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D83354
Summary:
D80831 changed part of the prefix usage for AIX.
But there are other places getting prefix from DataLayout.
This patch intends to make prefix usage consistent on AIX.
Reviewed by: hubert.reinterpretcast, daltenty
Differential Revision: https://reviews.llvm.org/D81270
Every other value parameter attribute uses parentheses, so accept this
as the preferred modern syntax. Updating everything to use the new
syntax is left for a future change.
Add a new builtin-function __builtin_expect_with_probability and
intrinsic llvm.expect.with.probability.
The interface is __builtin_expect_with_probability(long expr, long
expected, double probability).
It is mainly the same as __builtin_expect besides one more argument
indicating the probability of expression equal to expected value. The
probability should be a constant floating-point expression and be in
range [0.0, 1.0] inclusive.
It is similar to builtin-expect-with-probability function in GCC
built-in functions.
Differential Revision: https://reviews.llvm.org/D79830
This patch adjust the load/store matrix intrinsics, formerly known as
llvm.matrix.columnwise.load/store, to improve the naming and allow
passing of extra information (volatile).
The patch performs the following changes:
* Rename columnwise.load/store to column.major.load/store. This is more
expressive and also more in line with the naming in Clang.
* Changes the stride arguments from i32 to i64. The stride can be
larger than i32 and this makes things more uniform with the way
things are handled in Clang.
* A new boolean argument is added to indicate whether the load/store
is volatile. The lowering respects that when emitting vector
load/store instructions
* MatrixBuilder is updated to require both Alignment and IsVolatile
arguments, which are passed through to the generated intrinsic. The
alignment is set using the `align` attribute.
The changes are grouped together in a single patch, to have a single
commit that breaks the compatibility. We probably should be fine with
updating the intrinsics, as we did not yet officially support them in
the last stable release. If there are any concerns, we can add
auto-upgrade rules for the columnwise intrinsics though.
Reviewers: anemet, Gerolf, hfinkel, andrew.w.kaylor, LuoYuanke, nicolasvasilache, rjmccall, ftynse
Reviewed By: anemet, nicolasvasilache
Differential Revision: https://reviews.llvm.org/D81472
Summary:
This patch adds optional field into function summary,
implements asm and bitcode serialization. YAML
serialization is omitted and can be added later if
needed.
This patch includes this information into summary only
if module contains at least one sanitize_memtag function.
In a near future MTE is the user of the analysis.
Later if needed we can provede more direct control
on when information is included into summary.
Reviewers: eugenis
Subscribers: hiraditya, steven_wu, dexonsmith, arphaman, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80908
Currently, gc.relocates are defined in terms of indices into the statepoint's operand list. Given the gc args are at the end of a variable length list of operands, this makes interpreting their indices by hand a tad challenging. We can simplify the statepoint sequence and improve readability quite a bit by pulling these new operands into their own named operand bundle.
This patch defines a new operand bundle tag "gc-live". The semantics of the bundle are the same as the existing gc arguments of a statepoint. This patch simply introduces the definition and codegen for the bundle, future patches will migrate RS4GC to emitting the new form.
Interestingly, with this done and the recent migration to using deopt and gc-transition bundles, we really don't have much left in the statepoint itself. It really looks like the existing ID and flags fields are redundant; we have (existing!) attributes for all of them. I think we'll be able to reduce the gc.statepoint signature to simply a wrapped call (e.g. actual target and actual arguments).
Differential Revision: https://reviews.llvm.org/D80937
Currently all code instances within the matrix lowering pass consider
matrix A to be MxN and B to be NxK, producing C which is MxK. Anyone
interacting with this API after reading the docs but without reading the pass
would expect A: MxK, B: KxN, and C: MxN. These changes bring the documentation
in line with the implementation.
One point of concern with this, the original signature as described in the docs
may be better or at least more expected. The interface as it was written
reflected other common matrix multiplication interfaces such as BLAS'[1], where
the matrices are MxK, KxN, MxN respectively. Choosing to honor this requires
changing code and tests instead, but should be mostly just renaming of variables.
Patch by Braedy Kuzma <braedy@ualberta.ca>
[1] http://www.netlib.org/lapack/explore-html/db/dc9/group__single__blas__level3_gafe51bacb54592ff5de056acabd83c260.html#gafe51bacb54592ff5de056acabd83c260
Reviewers: anemet, LuoYuanke, nicolasvasilache, fhahn
Reviewed By: fhahn
Differential Revision: https://reviews.llvm.org/D80663
This is split off from D79100 and:
- adds a intrinsic description/definition for @llvm.get.active.lane.mask(), and
- describe its semantics in LangRef.
As described (in more detail) in its LangRef section, it is semantically
equivalent to an icmp with the vector induction variable and the back-edge
taken count, and generates a mask of active/inactive vector lanes.
It will have several use cases. First, it will be used by the
ExpandVectorPredication pass for the VP intrinsics, to expand VP intrinsics for
scalable vectors on targets that do not support the `%evl` parameter, see
D78203.
Also, this is part of, and essential for our ARM MVE tail-predication story:
- this intrinsic will be emitted by the LoopVectorizer in D79100, when
the scalar epilogue is tail-folded into the vector body. This new intrinsic
will generate the predicate for the masked loads/stores, and it takes the
back-edge taken count as an argument. The back-edge taken count represents the
number of elements processed by the loop, which we need to setup MVE
tail-predication.
- Emitting the intrinsic is controlled by a new TTI hook, see D80597.
- We pick up this new intrinsic in an ARM MVETailPredication backend pass, see
D79175, and convert it to a MVE target specific intrinsic/instruction to
create a tail-predicated loop.
Differential Revision: https://reviews.llvm.org/D80596
The HardwareLoop intrinsics were missing and not described in LangRef. This
adds these descriptions/definitions.
Differential Revision: https://reviews.llvm.org/D80316
Summary:
preallocated and musttail can work together, but we don't want to call
@llvm.call.preallocated.setup() to modify the stack in musttail calls.
So we shouldn't have the "preallocated" operand bundle when a
preallocated call is musttail.
Also disallow use of preallocated on calls without preallocated.
Codegen not yet implemented.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80581
Summary:
A struct argument can be passed-by-value to a callee via a pointer to a
temporary stack copy. Add support for emitting an entry value DBG_VALUE
when an indirect parameter DBG_VALUE becomes unavailable. This is done
by omitting DW_OP_stack_value from the entry value expression, to make
the expression describe the location of an object.
rdar://63373691
Reviewers: djtodoro, aprantl, dstenb
Subscribers: hiraditya, lldb-commits, llvm-commits
Tags: #lldb, #llvm
Differential Revision: https://reviews.llvm.org/D80345
This intrinsic implements IEEE-754 operation roundToIntegralTiesToEven,
and performs rounding to the nearest integer value, rounding halfway
cases to even. The intrinsic represents the missed case of IEEE-754
rounding operations and now llvm provides full support of the rounding
operations defined by the standard.
Differential Revision: https://reviews.llvm.org/D75670
This change makes minor correction to the implementation of intrinsic
`llvm.flt.rounds`:
- Added documentation entry in LangRef,
- Attributes of the intrinsic changed to be in line with other functions
dependent of floating-point environment.
Differential Revision: https://reviews.llvm.org/D79322
Summary: 'A' constraint requires an immediate int or fp constant that can be inlined in an instruction encoding.
Reviewers: arsenm, rampitec
Differential Revision: https://reviews.llvm.org/D78494
The "null-pointer-is-valid" attribute needs to be checked by many
pointer-related combines. To make the check more efficient, convert
it from a string into an enum attribute.
In the future, this attribute may be replaced with data layout
properties.
Differential Revision: https://reviews.llvm.org/D78862
Summary:
The BFloat IR type is introduced to provide support for, initially, the BFloat16
datatype introduced with the Armv8.6 architecture (optional from Armv8.2
onwards). It has an 8-bit exponent and a 7-bit mantissa and behaves like an IEEE
754 floating point IR type.
This is part of a patch series upstreaming Armv8.6 features. Subsequent patches
will upstream intrinsics support and C-lang support for BFloat.
Reviewers: SjoerdMeijer, rjmccall, rsmith, liutianle, RKSimon, craig.topper, jfb, LukeGeeson, sdesmalen, deadalnix, ctetreau
Subscribers: hiraditya, llvm-commits, danielkiss, arphaman, kristof.beyls, dexonsmith
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D78190
This patch adds support for DWARF attribute DW_AT_data_location.
Summary:
Dynamic arrays in fortran are described by array descriptor and
data allocation address. Former is mapped to DW_AT_location and
later is mapped to DW_AT_data_location.
Testing:
unit test cases added (hand-written)
check llvm
check debug-info
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79592
llvm rejects DWARF operator DW_OP_push_object_address.This DWARF
operator is needed for Flang to support allocatable array.
Summary:
Currently llvm rejects DWARF operator DW_OP_push_object_address.
below error is produced when llvm finds this operator.
[..]
invalid expression
!DIExpression(151)
warning: ignoring invalid debug info in pushobj.ll
[..]
There are some parts missing in support of this operator, need to
be completed.
Testing
-added a unit testcase
-check-debuginfo
-check-llvm
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D79306
We want to add a way to avoid merging identical calls so as to keep the
separate debug-information for those calls. There is also an asan
usecase where having this attribute would be beneficial to avoid
alternative work-arounds.
Here is the link to the feature request:
https://bugs.llvm.org/show_bug.cgi?id=42783.
`nomerge` is different from `noline`. `noinline` prevents function from
inlining at callsites, but `nomerge` prevents multiple identical calls
from being merged into one.
This patch adds `nomerge` to disable the optimization in IR level. A
followup patch will be needed to let backend understands `nomerge` and
avoid tail merge at backend.
Reviewed By: asbirlea, rnk
Differential Revision: https://reviews.llvm.org/D78659
Linkage type was only referenced for functions, not for global
variables.
Clarify that LLVM doesn't make assumption about the allocation size when
no definitive initializer for a global variable is known.
Differential Revision: https://reviews.llvm.org/D78952
The 'nsz' flag is different than 'nnan' or 'ninf' in that it does not create poison.
Make that explicit in the LangRef and fix ValueTracking analysis that misinterpreted
the definition.
This manifests as bugs in InstSimplify shown in the test diffs and as discussed in
PR45778:
https://bugs.llvm.org/show_bug.cgi?id=45778
Differential Revision: https://reviews.llvm.org/D79422
Add llvm.call.preallocated.{setup,arg} instrinsics.
Add "preallocated" operand bundle which takes a token produced by llvm.call.preallocated.setup.
Add "preallocated" parameter attribute, which is like byval but without the copy.
Verifier changes for these IR constructs.
See https://github.com/rnk/llvm-project/blob/call-setup-docs/llvm/docs/CallSetup.md
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74651
Now compiler defines 5 sets of constants to represent rounding mode.
These are:
1. `llvm::APFloatBase::roundingMode`. It specifies all 5 rounding modes
defined by IEEE-754 and is used in `APFloat` implementation.
2. `clang::LangOptions::FPRoundingModeKind`. It specifies 4 of 5 IEEE-754
rounding modes and a special value for dynamic rounding mode. It is used
in clang frontend.
3. `llvm::fp::RoundingMode`. Defines the same values as
`clang::LangOptions::FPRoundingModeKind` but in different order. It is
used to specify rounding mode in in IR and functions that operate IR.
4. Rounding mode representation used by `FLT_ROUNDS` (C11, 5.2.4.2.2p7).
Besides constants for rounding mode it also uses a special value to
indicate error. It is convenient to use in intrinsic functions, as it
represents platform-independent representation for rounding mode. In this
role it is used in some pending patches.
5. Values like `FE_DOWNWARD` and other, which specify rounding mode in
library calls `fesetround` and `fegetround`. Often they represent bits
of some control register, so they are target-dependent. The same names
(not values) and a special name `FE_DYNAMIC` are used in
`#pragma STDC FENV_ROUND`.
The first 4 sets of constants are target independent and could have the
same numerical representation. It would simplify conversion between the
representations. Also now `clang::LangOptions::FPRoundingModeKind` and
`llvm::fp::RoundingMode` do not contain the value for IEEE-754 rounding
direction `roundTiesToAway`, although it is supported natively on
some targets.
This change defines all the rounding mode type via one `llvm::RoundingMode`,
which also contains rounding mode for IEEE rounding direction `roundTiesToAway`.
Differential Revision: https://reviews.llvm.org/D77379
D72467 updated the shufflevector instruction to include a constant mask
rather than a mask operand. The LangRef text was vague enough to still
make sense, but it is better to update here too, so there's no confusion
about valid mask values. The text here is adapted from the documentation
code comments for "class ShuffleVectorInst".
Differential Revision: https://reviews.llvm.org/D77396
We already mention that `noalias` is modeled after the C99 `restrict`
qualifier but we did omit one important requirement in the description.
For the restrict guarantees the object affected has to be modified
during the execution of the function, in any way (see 6.7.3.1.4 in [0]).
There are two reasons we want this restriction as well:
1) To match the `restrict` semantics when we lower it to `noalias`.
2) To allow the reasoning that the object pointed to by a `noalias`
pointer is not modified through means not derived from this
pointer. Hence, following the uses of that pointer is sufficient
to determine potential modifications.
The discussion on this came up as part of D73428. In that patch the
Attributor is taught to derive `noalias` for call site arguments based
on alias queries against objects that are accessed in the callee. This
is possible even if the pointer passed at the call site was "not-`noalias`".
To simplify the logic there *and* to allow the use of `noalias` as
described in 2) above, it is beneficial to follow the C `restrict`
semantics in cases where there might be "read-read-aliases". Note that
AliasAnalysis* queries for read only objects already result in
`NoAlias` even if the pointers might "alias".
* From this point of view our Alias Analysis is basically a Dependence
Analysis.
[0] http://www.open-std.org/jtc1/sc22/wg14/www/docs/n1124.pdf
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D74935
Summary:
This patch clarifies the semantics of branching on undef value.
Defining `br undef` as undefined behavior explains optimizations that use branch conditions, such as CVP (D76931) and GVN (propagateEquality).
For `switch cond`, it is defined to raise UB if cond is an expression containing undef && cond is not frozen &&
it may yield different values.
This allows that at the destination block the branch condition can be assumed to be frozen already (otherwise UB was already triggered).
This condition is slightly stricter than MemorySanitizer, which allows undef-y condition if it always leads to the same destination,
but it does not break MemorySanitizer because we are giving stricter constraint.
Reviewers: efriedma, fhahn, nikic, spatel, jdoerfert, nlopes
Reviewed By: nlopes
Subscribers: regehr, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D76973
This is copied from the suggested text by @regehr in:
https://bugs.llvm.org/show_bug.cgi?id=20895
The way forward was not clear for several years, but now that we
have 'freeze' and Alive2, the behavior should be documented.
Also see comments in D76332.
LLVM currently supports CSK_MD5 and CSK_SHA1 source file checksums in
debug info. This change adds support for CSK_SHA256 checksums.
The SHA256 checksums are supported by the CodeView debug format.
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D75785
Summary: This patch adds the basic utilities to deal with dropable uses. dropable uses are uses that we rather drop than prevent transformations, for now they are limited to uses in llvm.assume.
Reviewers: jdoerfert, sstefan1
Reviewed By: jdoerfert
Subscribers: uenoku, lebedev.ri, mgorny, hiraditya, dexonsmith, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73404
Summary: As discussed in D75505, it's not particularly useful to change the type of a load to/from floating-point/integer because it's followed by a bitcast, and it might lead to surprising code generation. Check that this doesn't generally happen.
Reviewers: lebedev.ri
Subscribers: jkorous, dexonsmith, ributzka, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D75644
Summary:
Terminators in LLVM aren't prohibited from returning values. This means that
the "callbr" instruction, which is used for "asm goto", can support "asm goto
with outputs."
This patch removes all restrictions against "callbr" returning values. The
heavy lifting is done by the code generator. The "INLINEASM_BR" instruction's
a terminator, and the code generator doesn't allow non-terminator instructions
after a terminator. In order to correctly model the feature, we need to copy
outputs from "INLINEASM_BR" into virtual registers. Of course, those copies
aren't terminators.
To get around this issue, we split the block containing the "INLINEASM_BR"
right before the "COPY" instructions. This results in two cheats:
- Any physical registers defined by "INLINEASM_BR" need to be marked as
live-in into the block with the "COPY" instructions. This violates an
assumption that physical registers aren't marked as "live-in" until after
register allocation. But it seems as if the live-in information only
needs to be correct after register allocation. So we're able to get away
with this.
- The indirect branches from the "INLINEASM_BR" are moved to the "COPY"
block. This is to satisfy PHI nodes.
I've been told that MLIR can support this handily, but until we're able to
use it, we'll have to stick with the above.
Reviewers: jyknight, nickdesaulniers, hfinkel, MaskRay, lattner
Reviewed By: nickdesaulniers, MaskRay, lattner
Subscribers: rriddle, qcolombet, jdoerfert, MatzeB, echristo, MaskRay, xbolva00, aaron.ballman, cfe-commits, JonChesterfield, hiraditya, llvm-commits, rnk, craig.topper
Tags: #llvm, #clang
Differential Revision: https://reviews.llvm.org/D69868
Summary:
This patch adds intrinsics and ISelDAG nodes for signed
and unsigned fixed-point division:
```
llvm.sdiv.fix.sat.*
llvm.udiv.fix.sat.*
```
These intrinsics perform scaled, saturating division
on two integers or vectors of integers. They are
required for the implementation of the Embedded-C
fixed-point arithmetic in Clang.
Reviewers: bjope, leonardchan, craig.topper
Subscribers: hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71550
Summary:
Operand bundles on an llvm.assume allows representing
assumptions that an attribute holds for a certain value at a certain position.
Operand bundles enable assumptions that are either hard or impossible to
represent as a boolean argument of an llvm.assume.
Reviewers: jdoerfert, fhahn, nlopes, reames, regehr, efriedma
Reviewed By: jdoerfert
Subscribers: lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D74209
Summary:
Debug Info Version was changed to use "Max" instead of "Warning" per the
original design intent - but this maxes old/new IR unlinkable, since
mismatched merge styles are a linking failure.
It seems possible/maybe reasonable to actually support the combination
of these two flags: Warn, but then use the maximum value rather than the
first value/earlier module's value.
Reviewers: tejohnson
Differential Revision: https://reviews.llvm.org/D74257
AMDGPU and x86 at least both have separate controls for whether
denormal results are flushed on output, and for whether denormals are
implicitly treated as 0 as an input. The current DAGCombiner use only
really cares about the input treatment of denormals.
Summary:
This is a follow up on D61634. It adds an LLVM IR intrinsic to allow better implementation of memcpy from C++.
A follow up CL will add the intrinsics in Clang.
Reviewers: courbet, theraven, t.p.northover, jdoerfert, tejohnson
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D71710
Summary: masked_load and masked_store instructions require the alignment to be specified and a power of two. It seems to me that this requirement applies to masked_gather and masked_scatter as well.
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D73179
In LLVM IR, vscale can be represented with an intrinsic. For some targets,
this is equivalent to the constexpr:
getelementptr <vscale x 1 x i8>, <vscale x 1 x i8>* null, i32 1
This can be used to propagate the value in CodeGenPrepare.
In ISel we add a node that can be legalized to one or more
instructions to materialize the runtime vector length.
This patch also adds SVE CodeGen support for VSCALE, which maps this
node to RDVL instructions (for scaled multiples of 16bytes) or CNT[HSD]
instructions (scaled multiples of 2, 4, or 8 bytes, respectively).
Reviewers: rengolin, cameron.mcinally, hfinkel, sebpop, SjoerdMeijer, efriedma, lattner
Reviewed by: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68203
Currently there are 4 different mechanisms for controlling denormal
flushing behavior, and about as many equivalent frontend controls.
- AMDGPU uses the fp32-denormals and fp64-f16-denormals subtarget features
- NVPTX uses the nvptx-f32ftz attribute
- ARM directly uses the denormal-fp-math attribute
- Other targets indirectly use denormal-fp-math in one DAGCombine
- cl-denorms-are-zero has a corresponding denorms-are-zero attribute
AMDGPU wants a distinct control for f32 flushing from f16/f64, and as
far as I can tell the same is true for NVPTX (based on the attribute
name).
Work on consolidating these into the denormal-fp-math attribute, and a
new type specific denormal-fp-math-f32 variant. Only ARM seems to
support the two different flush modes, so this is overkill for the
other use cases. Ideally we would error on the unsupported
positive-zero mode on other targets from somewhere.
Move the logic for selecting the flush mode into the compiler driver,
instead of handling it in cc1. denormal-fp-math/denormal-fp-math-f32
are now both cc1 flags, but denormal-fp-math-f32 is not yet exposed as
a user flag.
-cl-denorms-are-zero, -fcuda-flush-denormals-to-zero and
-fno-cuda-flush-denormals-to-zero will be mapped to
-fp-denormal-math-f32=ieee or preserve-sign rather than the old
attributes.
Stop emitting the denorms-are-zero attribute for the OpenCL flag. It
has no in-tree users. The meaning would also be target dependent, such
as the AMDGPU choice to treat this as only meaning allow flushing of
f32 and not f16 or f64. The naming is also potentially confusing,
since DAZ in other contexts refers to instructions implicitly treating
input denormals as zero, not necessarily flushing output denormals to
zero.
This also does not attempt to change the behavior for the current
attribute. The LangRef now states that the default is ieee behavior,
but this is inaccurate for the current implementation. The clang
handling is slightly hacky to avoid touching the existing
denormal-fp-math uses. Fixing this will be left for a future patch.
AMDGPU is still using the subtarget feature to control the denormal
mode, but the new attribute are now emitted. A future change will
switch this and remove the subtarget features.
Summary:
This patch adds intrinsics and ISelDAG nodes for
signed and unsigned fixed-point division:
llvm.sdiv.fix.*
llvm.udiv.fix.*
These intrinsics perform scaled division on two
integers or vectors of integers. They are required
for the implementation of the Embedded-C fixed-point
arithmetic in Clang.
Patch by: ebevhan
Reviewers: bjope, leonardchan, efriedma, craig.topper
Reviewed By: craig.topper
Subscribers: Ka-Ka, ilya, hiraditya, jdoerfert, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D70007
Summary:
Remove the restrictions that preventing "asm goto" from returning non-void
values. The values returned by "asm goto" are only valid on the "fallthrough"
path.
Reviewers: jyknight, nickdesaulniers, hfinkel
Reviewed By: jyknight, nickdesaulniers
Subscribers: rsmith, hiraditya, llvm-commits, cfe-commits, craig.topper, rnk
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D69876
Adds the RISC-V asm template argument modifiers currently supported by LLVM.
Additional ones supported by GCC will be added to the documentation when we
start supporting them.
Add new intrinsics
llvm.experimental.constrained.minimum
llvm.experimental.constrained.maximum
as strict versions of llvm.minimum and llvm.maximum.
Includes SystemZ back-end support.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71624
The following intrinsics currently carry a rounding mode metadata argument:
llvm.experimental.constrained.minnum
llvm.experimental.constrained.maxnum
llvm.experimental.constrained.ceil
llvm.experimental.constrained.floor
llvm.experimental.constrained.round
llvm.experimental.constrained.trunc
This is not useful since the semantics of those intrinsics do not in any way
depend on the rounding mode. In similar cases, other constrained intrinsics
do not have the rounding mode argument. Remove it here as well.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D71218
of integers to floating point.
This includes some of Craig Topper's changes for promotion support from
D71130.
Differential Revision: https://reviews.llvm.org/D69275
This is the first patch adding an initial set of matrix intrinsics and a
corresponding lowering pass. This has been discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2019-October/136240.html
The first patch introduces four new intrinsics (transpose, multiply,
columnwise load and store) and a LowerMatrixIntrinsics pass, that
lowers those intrinsics to vector operations.
Matrixes are embedded in a 'flat' vector (e.g. a 4 x 4 float matrix
embedded in a <16 x float> vector) and the intrinsics take the dimension
information as parameters. Those parameters need to be ConstantInt.
For the memory layout, we initially assume column-major, but in the RFC
we also described how to extend the intrinsics to support row-major as
well.
For the initial lowering, we split the input of the intrinsics into a
set of column vectors, transform those column vectors and concatenate
the result columns to a flat result vector.
This allows us to lower the intrinsics without any shape propagation, as
mentioned in the RFC. In follow-up patches, we plan to submit the
following improvements:
* Shape propagation to eliminate the embedding/splitting for each
intrinsic.
* Fused & tiled lowering of multiply and other operations.
* Optimization remarks highlighting matrix expressions and costs.
* Generate loops for operations on large matrixes.
* More general block processing for operation on large vectors,
exploiting shape information.
We would like to add dedicated transpose, columnwise load and store
intrinsics, even though they are not strictly necessary. For example, we
could instead emit a large shufflevector instruction instead of the
transpose. But we expect that to
(1) become unwieldy for larger matrixes (even for 16x16 matrixes,
the resulting shufflevector masks would be huge),
(2) risk instcombine making small changes, causing us to fail to
detect the transpose, preventing better lowerings
For the load/store, we are additionally planning on exploiting the
intrinsics for better alias analysis.
Reviewers: anemet, Gerolf, reames, hfinkel, andrew.w.kaylor, efriedma, rengolin
Reviewed By: anemet
Differential Revision: https://reviews.llvm.org/D70456
This adds support for constrained floating-point comparison intrinsics.
Specifically, we add:
declare <ty2>
@llvm.experimental.constrained.fcmp(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
declare <ty2>
@llvm.experimental.constrained.fcmps(<type> <op1>, <type> <op2>,
metadata <condition code>,
metadata <exception behavior>)
The first variant implements an IEEE "quiet" comparison (i.e. we only
get an invalid FP exception if either argument is a SNaN), while the
second variant implements an IEEE "signaling" comparison (i.e. we get
an invalid FP exception if either argument is any NaN).
The condition code is implemented as a metadata string. The same set
of predicates as for the fcmp instruction is supported (except for the
"true" and "false" predicates).
These new intrinsics are mapped by SelectionDAG codegen onto two new
ISD opcodes, ISD::STRICT_FSETCC and ISD::STRICT_FSETCCS, again
representing quiet vs. signaling comparison operations. Otherwise
those nodes look like SETCC nodes, with an additional chain argument
and result as usual for strict FP nodes. The patch includes support
for the common legalization operations for those nodes.
The patch also includes full SystemZ back-end support for the new
ISD nodes, mapping them to all available SystemZ instruction to
fully implement strict semantics (scalar and vector).
Differential Revision: https://reviews.llvm.org/D69281
Summary:
Rework the GMIR documentation to focus more on the end user than the
implementation and tie it in to the MIR document. There was also some
out-of-date information which has been removed.
The quality of the GenericOpcode reference is highly variable and drops
sharply as I worked through them all but we've got to start somewhere :-).
It would be great if others could expand on this too as there is an awful
lot to get through.
Also fix a typo in the definition of G_FLOG. Previously, the comments said
we had two base-2's (G_FLOG and G_FLOG2).
Reviewers: aemerson, volkan, rovka, arsenm
Reviewed By: rovka
Subscribers: wdng, arphaman, jfb, Petar.Avramovic, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69545
This reverts commit 004ed2b0d1.
Original commit hash 6d03890384
Summary:
This adds a clang option to disable inline line tables. When it is used,
the inliner uses the call site as the location of the inlined function instead of
marking it as an inline location with the function location.
https://reviews.llvm.org/D67723
Summary:
This adds a clang option to disable inline line tables. When it is used,
the inliner uses the call site as the location of the inlined function instead of
marking it as an inline location with the function location.
See https://bugs.llvm.org/show_bug.cgi?id=42344
Reviewers: rnk
Subscribers: hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D67723
Summary:
This extends the rules for when a call instruction is deemed to be an
FPMathOperator, which is based on the type of the call (i.e. the return
type of the function being called). Previously we only allowed
floating-point and vector-of-floating-point types. Now we also allow
arrays (nested to any depth) of floating-point and
vector-of-floating-point types.
This was motivated by llpc, the pipeline compiler for AMD GPUs
(https://github.com/GPUOpen-Drivers/llpc). llpc has many math library
functions that operate on vectors, typically represented as <4 x float>,
and some that operate on matrices, typically represented as
[4 x <4 x float>], and it's useful to be able to decorate calls to all
of them with fast math flags.
Reviewers: spatel, wristow, arsenm, hfinkel, aemerson, efriedma, cameron.mcinally, mcberg2017, jmolloy
Subscribers: wdng, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D69161
Summary:
A new function pass (Transforms/CFGuard/CFGuard.cpp) inserts CFGuard checks on
indirect function calls, using either the check mechanism (X86, ARM, AArch64) or
or the dispatch mechanism (X86-64). The check mechanism requires a new calling
convention for the supported targets. The dispatch mechanism adds the target as
an operand bundle, which is processed by SelectionDAG. Another pass
(CodeGen/CFGuardLongjmp.cpp) identifies and emits valid longjmp targets, as
required by /guard:cf. This feature is enabled using the `cfguard` CC1 option.
Reviewers: thakis, rnk, theraven, pcc
Subscribers: ychen, hans, metalcanine, dmajor, tomrittervg, alex, mehdi_amini, mgorny, javed.absar, kristof.beyls, hiraditya, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D65761
Remove dead virtual functions from vtables with
replaceNonMetadataUsesWith, so that CGProfile metadata gets cleaned up
correctly.
Original commit message:
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 375094
Summary:
Internally in LLVM's metadata we use DW_OP_entry_value operations with
the same semantics as DWARF; that is, its operand specifies the number
of bytes that the entry value covers.
At the time of emitting entry values we don't know the emitted size of
the DWARF expression that the entry value will cover. Currently the size
is hardcoded to 1 in DIExpression, and other values causes the verifier
to fail. As the size is 1, that effectively means that we can only have
valid entry values for registers that can be encoded in one byte, which
are the registers with DWARF numbers 0 to 31 (as they can be encoded as
single-byte DW_OP_reg0..DW_OP_reg31 rather than a multi-byte
DW_OP_regx). It is a bit confusing, but it seems like llvm-dwarfdump
will print an operation "correctly", even if the byte size is less than
that, which may make it seem that we emit correct DWARF for registers
with DWARF numbers > 31. If you instead use readelf for such cases, it
will interpret the number of specified bytes as a DWARF expression. This
seems like a limitation in llvm-dwarfdump.
As suggested in D66746, a way forward would be to add an internal
variant of DW_OP_entry_value, DW_OP_LLVM_entry_value, whose operand
instead specifies the number of operations that the entry value covers,
and we then translate that into the byte size at the time of emission.
In this patch that internal operation is added. This patch keeps the
limitation that a entry value can only be applied to simple register
locations, but it will fix the issue with the size operand being
incorrect for DWARF numbers > 31.
Reviewers: aprantl, vsk, djtodoro, NikolaPrica
Reviewed By: aprantl
Subscribers: jyknight, fedor.sergeev, hiraditya, llvm-commits
Tags: #debug-info, #llvm
Differential Revision: https://reviews.llvm.org/D67492
llvm-svn: 374881
Currently, it is hard for the compiler to remove unused C++ virtual
functions, because they are all referenced from vtables, which are referenced
by constructors. This means that if the constructor is called from any live
code, then we keep every virtual function in the final link, even if there
are no call sites which can use it.
This patch allows unused virtual functions to be removed during LTO (and
regular compilation in limited circumstances) by using type metadata to match
virtual function call sites to the vtable slots they might load from. This
information can then be used in the global dead code elimination pass instead
of the references from vtables to virtual functions, to more accurately
determine which functions are reachable.
To make this transformation safe, I have changed clang's code-generation to
always load virtual function pointers using the llvm.type.checked.load
intrinsic, instead of regular load instructions. I originally tried writing
this using clang's existing code-generation, which uses the llvm.type.test
and llvm.assume intrinsics after doing a normal load. However, it is possible
for optimisations to obscure the relationship between the GEP, load and
llvm.type.test, causing GlobalDCE to fail to find virtual function call
sites.
The existing linkage and visibility types don't accurately describe the scope
in which a virtual call could be made which uses a given vtable. This is
wider than the visibility of the type itself, because a virtual function call
could be made using a more-visible base class. I've added a new
!vcall_visibility metadata type to represent this, described in
TypeMetadata.rst. The internalization pass and libLTO have been updated to
change this metadata when linking is performed.
This doesn't currently work with ThinLTO, because it needs to see every call
to llvm.type.checked.load in the linkage unit. It might be possible to
extend this optimisation to be able to use the ThinLTO summary, as was done
for devirtualization, but until then that combination is rejected in the
clang driver.
To test this, I've written a fuzzer which generates random C++ programs with
complex class inheritance graphs, and virtual functions called through object
and function pointers of different types. The programs are spread across
multiple translation units and DSOs to test the different visibility
restrictions.
I've also tried doing bootstrap builds of LLVM to test this. This isn't
ideal, because only classes in anonymous namespaces can be optimised with
-fvisibility=default, and some parts of LLVM (plugins and bugpoint) do not
work correctly with -fvisibility=hidden. However, there are only 12 test
failures when building with -fvisibility=hidden (and an unmodified compiler),
and this change does not cause any new failures for either value of
-fvisibility.
On the 7 C++ sub-benchmarks of SPEC2006, this gives a geomean code-size
reduction of ~6%, over a baseline compiled with "-O2 -flto
-fvisibility=hidden -fwhole-program-vtables". The best cases are reductions
of ~14% in 450.soplex and 483.xalancbmk, and there are no code size
increases.
I've also run this on a set of 8 mbed-os examples compiled for Armv7M, which
show a geomean size reduction of ~3%, again with no size increases.
I had hoped that this would have no effect on performance, which would allow
it to awlays be enabled (when using -fwhole-program-vtables). However, the
changes in clang to use the llvm.type.checked.load intrinsic are causing ~1%
performance regression in the C++ parts of SPEC2006. It should be possible to
recover some of this perf loss by teaching optimisations about the
llvm.type.checked.load intrinsic, which would make it worth turning this on
by default (though it's still dependent on -fwhole-program-vtables).
Differential revision: https://reviews.llvm.org/D63932
llvm-svn: 374539
When the target option GuaranteedTailCallOpt is specified, calls with
the fastcc calling convention will be transformed into tail calls if
they are in tail position. This diff adds a new calling convention,
tailcc, currently supported only on X86, which behaves the same way as
fastcc, except that the GuaranteedTailCallOpt flag does not need to
enabled in order to enable tail call optimization.
Patch by Dwight Guth <dwight.guth@runtimeverification.com>!
Reviewed By: lebedev.ri, paquette, rnk
Differential Revision: https://reviews.llvm.org/D67855
llvm-svn: 373976
Earlier in the year intrinsics for lrint, llrint, lround and llround were
added to llvm. The constrained versions are now implemented here.
Reviewed by: andrew.w.kaylor, craig.topper, cameron.mcinally
Approved by: craig.topper
Differential Revision: https://reviews.llvm.org/D64746
llvm-svn: 373900
Summary: The constraint goes up to regs d15 and q7, not d16 and q8.
Subscribers: kristof.beyls, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D68090
llvm-svn: 373228
Summary:
The list of indirect labels should ALWAYS have their blockaddresses as
argument operands to the callbr (but not necessarily the other way
around). Add an invariant that checks this.
The verifier catches a bad test case that was added recently in r368478.
I think that was a simple mistake, and the test was made less strict in
regards to the precise addresses (as those weren't specifically the
point of the test).
This invariant will be used to find a reported bug.
Link: https://www.spinics.net/lists/arm-kernel/msg753473.html
Link: https://github.com/ClangBuiltLinux/linux/issues/649
Reviewers: craig.topper, void, chandlerc
Reviewed By: void
Subscribers: ychen, lebedev.ri, javed.absar, kristof.beyls, hiraditya, llvm-commits, srhines
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D67196
llvm-svn: 372923
During the review of D67434, it was recommended to make fmuladd's
behavior more explicit. D67434 depends on this interpretation.
Reviewers: efriedma, jfb, reames, scanon, lebedev.ri, spatel
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D67552
llvm-svn: 372892
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917 <https://reviews.llvm.org/D61917>
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372878
The changes here are based on the corresponding diffs for allowing FMF on 'select':
D61917
As discussed there, we want to have fast-math-flags be a property of an FP value
because the alternative (having them on things like fcmp) leads to logical
inconsistency such as:
https://bugs.llvm.org/show_bug.cgi?id=38086
The earlier patch for select made almost no practical difference because most
unoptimized conditional code begins life as a phi (based on what I see in clang).
Similarly, I don't expect this patch to do much on its own either because
SimplifyCFG promptly drops the flags when converting to select on a minimal
example like:
https://bugs.llvm.org/show_bug.cgi?id=39535
But once we have this plumbing in place, we should be able to wire up the FMF
propagation and start solving cases like that.
The change to RecurrenceDescriptor::AddReductionVar() is required to prevent a
regression in a LoopVectorize test. We are intersecting the FMF of any
FPMathOperator there, so if a phi is not properly annotated, new math
instructions may not be either. Once we fix the propagation in SimplifyCFG, it
may be safe to remove that hack.
Differential Revision: https://reviews.llvm.org/D67564
llvm-svn: 372866
Summary:
Adds the following inline asm constraints for SVE:
- Upl: One of the low eight SVE predicate registers, P0 to P7 inclusive
- Upa: SVE predicate register with full range, P0 to P15
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, cameron.mcinally, greened, rengolin
Reviewed By: rovka
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66524
llvm-svn: 371967
Summary:
Add an intrinsic that takes 2 unsigned integers with
the scale of them provided as the third argument and
performs fixed point multiplication on them. The
result is saturated and clamped between the largest and
smallest representable values of the first 2 operands.
This is a part of implementing fixed point arithmetic
in clang where some of the more complex operations
will be implemented as intrinsics.
Patch by: leonardchan, bjope
Reviewers: RKSimon, craig.topper, bevinh, leonardchan, lebedev.ri, spatel
Reviewed By: leonardchan
Subscribers: ychen, wuzish, nemanjai, MaskRay, jsji, jdoerfert, Ka-Ka, hiraditya, rjmccall, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D57836
llvm-svn: 371308
Summary:
Adds the following inline asm constraints for SVE:
- w: SVE vector register with full range, Z0 to Z31
- x: Restricted to registers Z0 to Z15 inclusive.
- y: Restricted to registers Z0 to Z7 inclusive.
This change also adds the "z" modifier to interpret a register as an SVE register.
Not all of the bitconvert patterns added by this patch are used, but they have been included here for completeness.
Reviewers: t.p.northover, sdesmalen, rovka, momchil.velikov, rengolin, cameron.mcinally, greened
Reviewed By: sdesmalen
Subscribers: javed.absar, tschuett, rkruppe, psnobl, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D66302
llvm-svn: 370673
Some saturation examples for llvm.smul.fix.sat were not showing
the correct result. I've adjusted the operands to make sure that
we actually trigger overflow in those examples.
llvm-svn: 370566
This implements constrained floating point intrinsics for FP to signed and
unsigned integers.
Quoting from D32319:
The purpose of the constrained intrinsics is to force the optimizer to
respect the restrictions that will be necessary to support things like the
STDC FENV_ACCESS ON pragma without interfering with optimizations when
these restrictions are not needed.
Reviewed by: Andrew Kaylor, Craig Topper, Hal Finkel, Cameron McInally, Roman Lebedev, Kit Barton
Approved by: Craig Topper
Differential Revision: http://reviews.llvm.org/D63782
llvm-svn: 370228
This implements the DWARF 5 feature described in:
http://dwarfstd.org/ShowIssue.php?issue=141212.1
To support recognizing anonymous structs:
struct A {
struct { // Anonymous struct
int y;
};
} a;
This patch adds a new (DI)flag to LLVM metadata:
ExportSymbols
Differential Revision: https://reviews.llvm.org/D66352
llvm-svn: 369781
This patch adds a ptrmask intrinsic which allows masking out bits of a
pointer that must be zero when accessing it, because of ABI alignment
requirements or a restriction of the meaningful bits of a pointer
through the data layout.
This avoids doing a ptrtoint/inttoptr round trip in some cases (e.g. tagged
pointers) and allows us to not lose information about the underlying
object.
Reviewers: nlopes, efriedma, hfinkel, sanjoy, jdoerfert, aqjune
Reviewed by: sanjoy, jdoerfert
Differential Revision: https://reviews.llvm.org/D59065
llvm-svn: 368986
For some targets the LICM pass can result in sub-optimal code in some
cases where it would be better not to run the pass, but it isn't
always possible to suppress the transformations heuristically.
Where the front-end has insight into such cases it is beneficial
to attach loop metadata to disable the pass - this change adds the
llvm.licm.disable metadata to enable that.
Differential Revision: https://reviews.llvm.org/D64557
llvm-svn: 368296
A function is "no-return" if we never reach a return instruction, either
because there are none or the ones that exist are dead.
Test have been adjusted:
- either noreturn was added, or
- noreturn was avoided by modifying the code.
The new noreturn_{sync,async} test make sure we do handle invoke
instructions with a noreturn (and potentially nowunwind) callee
correctly, even in the presence of potential asynchronous exceptions.
llvm-svn: 367948
Previously, debuginfo types are annotated to
IR builtin preserve_struct_access_index() and
preserve_union_access_index(), but not
preserve_array_access_index(). The debug info
is useful to identify the root type name which
later will be used for type comparison.
For user access without explicit type conversions,
the previous scheme works as we can ignore intermediate
compiler generated type conversions (e.g., from union types to
union members) and still generate correct access index string.
The issue comes with user explicit type conversions, e.g.,
converting an array to a structure like below:
struct t { int a; char b[40]; };
struct p { int c; int d; };
struct t *var = ...;
... __builtin_preserve_access_index(&(((struct p *)&(var->b[0]))->d)) ...
Although BPF backend can derive the type of &(var->b[0]),
explicit type annotation make checking more consistent
and less error prone.
Another benefit is for multiple dimension array handling.
For example,
struct p { int c; int d; } g[8][9][10];
... __builtin_preserve_access_index(&g[2][3][4].d) ...
It would be possible to calculate the number of "struct p"'s
before accessing its member "d" if array debug info is
available as it contains each dimension range.
This patch enables to annotate IR builtin preserve_array_access_index()
with proper debuginfo type. The unit test case and language reference
is updated as well.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D65664
llvm-svn: 367724
This adds a new vectorize predication loop hint:
#pragma clang loop vectorize_predicate(enable)
that can be used to indicate to the vectoriser that all (load/store)
instructions should be predicated (masked). This allows, for example, folding
of the remainder loop into the main loop.
This patch will be followed up with D64916 and D65197. The former is a
refactoring in the loopvectorizer and the groundwork to make tail loop folding
a more general concept, and in the latter the actual tail loop folding
transformation will be implemented.
Differential Revision: https://reviews.llvm.org/D64744
llvm-svn: 366989
Summary:
Allow IntToPtrInst to carry !dereferenceable metadata tag.
This is valid since !dereferenceable can be only be applied to
pointer type values.
Change-Id: If8a6e3c616f073d51eaff52ab74535c29ed497b4
Subscribers: llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D64954
llvm-svn: 366826
Add "memtag" sanitizer that detects and mitigates stack memory issues
using armv8.5 Memory Tagging Extension.
It is similar in principle to HWASan, which is a software implementation
of the same idea, but there are enough differencies to warrant a new
sanitizer type IMHO. It is also expected to have very different
performance properties.
The new sanitizer does not have a runtime library (it may grow one
later, along with a "debugging" mode). Similar to SafeStack and
StackProtector, the instrumentation pass (in a follow up change) will be
inserted in all cases, but will only affect functions marked with the
new sanitize_memtag attribute.
Reviewers: pcc, hctim, vitalybuka, ostannard
Subscribers: srhines, mehdi_amini, javed.absar, kristof.beyls, hiraditya, cryptoad, steven_wu, dexonsmith, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D64169
llvm-svn: 366123
This is a followup patch for https://reviews.llvm.org/D61810/new/,
which adds new intrinsics preserve_{array,union,struct}_access_index.
Currently, only BPF backend utilizes preserve_{array,union,struct}_access_index
intrinsics, so all tests are compiled with BPF target.
https://reviews.llvm.org/D61524 already added some tests for these
intrinsics, but some of them pretty complex.
This patch added a few unit test cases focusing on individual intrinsic
functions.
Also made a few clarification on language reference for these intrinsics.
Differential Revision: https://reviews.llvm.org/D64606
llvm-svn: 366038
Introduce and deduce "nosync" function attribute to indicate that a function
does not synchronize with another thread in a way that other thread might free memory.
Reviewers: jdoerfert, jfb, nhaehnle, arsenm
Subscribers: wdng, hfinkel, nhaenhle, mehdi_amini, steven_wu,
dexonsmith, arsenm, uenoku, hiraditya, jfb, llvm-commits
Differential Revision: https://reviews.llvm.org/D62766
llvm-svn: 365830
Dump the DWARF information about call sites and call site parameters into
debug info sections.
The patch also provides an interface for the interpretation of instructions
that could load values of a call site parameters in order to generate DWARF
about the call site parameters.
([13/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60716
llvm-svn: 365467
For background of BPF CO-RE project, please refer to
http://vger.kernel.org/bpfconf2019.html
In summary, BPF CO-RE intends to compile bpf programs
adjustable on struct/union layout change so the same
program can run on multiple kernels with adjustment
before loading based on native kernel structures.
In order to do this, we need keep track of GEP(getelementptr)
instruction base and result debuginfo types, so we
can adjust on the host based on kernel BTF info.
Capturing such information as an IR optimization is hard
as various optimization may have tweaked GEP and also
union is replaced by structure it is impossible to track
fieldindex for union member accesses.
Three intrinsic functions, preserve_{array,union,struct}_access_index,
are introducted.
addr = preserve_array_access_index(base, index, dimension)
addr = preserve_union_access_index(base, di_index)
addr = preserve_struct_access_index(base, gep_index, di_index)
here,
base: the base pointer for the array/union/struct access.
index: the last access index for array, the same for IR/DebugInfo layout.
dimension: the array dimension.
gep_index: the access index based on IR layout.
di_index: the access index based on user/debuginfo types.
For example, for the following example,
$ cat test.c
struct sk_buff {
int i;
int b1:1;
int b2:2;
union {
struct {
int o1;
int o2;
} o;
struct {
char flags;
char dev_id;
} dev;
int netid;
} u[10];
};
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr)
= (void *) 4;
#define _(x) (__builtin_preserve_access_index(x))
int bpf_prog(struct sk_buff *ctx) {
char dev_id;
bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id));
return dev_id;
}
$ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \
test.c >& log
The generated IR looks like below:
...
define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 {
%2 = alloca %struct.sk_buff*, align 8
%3 = alloca i8, align 1
store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45
call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49
call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50
call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51
%4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45
%5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45
%6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs(
%struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19
%7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons(
[10 x %union.anon]* %6, i32 1, i32 5), !dbg !53
%8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons(
%union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26
%9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53
%10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s(
%struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34
%11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52
%12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55
%13 = sext i8 %12 to i32, !dbg !54
call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56
ret i32 %13, !dbg !57
}
!19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20)
!26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27)
!34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35)
Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index
attached to instructions to provide struct/union debuginfo type information.
For &ctx->u[5].dev.dev_id,
. The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout.
. The "%7 = ..." represents array subscript "5".
. The "%8 = ..." represents union member "dev" with index 1 for DI layout.
. The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout.
Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and
examining all preserve_*_access_index calls, the debuginfo struct/union/array access index
can be achieved.
The intrinsics also contain enough information to regenerate codes for IR layout.
For array and structure intrinsics, the proper GEP can be constructed.
For union intrinsics, replacing all uses of "addr" with "base" should be enough.
The test case ThinLTO/X86/lazyload_metadata.ll is adjusted to reflect the
new addition of the metadata.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61810
llvm-svn: 365423
For background of BPF CO-RE project, please refer to
http://vger.kernel.org/bpfconf2019.html
In summary, BPF CO-RE intends to compile bpf programs
adjustable on struct/union layout change so the same
program can run on multiple kernels with adjustment
before loading based on native kernel structures.
In order to do this, we need keep track of GEP(getelementptr)
instruction base and result debuginfo types, so we
can adjust on the host based on kernel BTF info.
Capturing such information as an IR optimization is hard
as various optimization may have tweaked GEP and also
union is replaced by structure it is impossible to track
fieldindex for union member accesses.
Three intrinsic functions, preserve_{array,union,struct}_access_index,
are introducted.
addr = preserve_array_access_index(base, index, dimension)
addr = preserve_union_access_index(base, di_index)
addr = preserve_struct_access_index(base, gep_index, di_index)
here,
base: the base pointer for the array/union/struct access.
index: the last access index for array, the same for IR/DebugInfo layout.
dimension: the array dimension.
gep_index: the access index based on IR layout.
di_index: the access index based on user/debuginfo types.
For example, for the following example,
$ cat test.c
struct sk_buff {
int i;
int b1:1;
int b2:2;
union {
struct {
int o1;
int o2;
} o;
struct {
char flags;
char dev_id;
} dev;
int netid;
} u[10];
};
static int (*bpf_probe_read)(void *dst, int size, const void *unsafe_ptr)
= (void *) 4;
#define _(x) (__builtin_preserve_access_index(x))
int bpf_prog(struct sk_buff *ctx) {
char dev_id;
bpf_probe_read(&dev_id, sizeof(char), _(&ctx->u[5].dev.dev_id));
return dev_id;
}
$ clang -target bpf -O2 -g -emit-llvm -S -mllvm -print-before-all \
test.c >& log
The generated IR looks like below:
...
define dso_local i32 @bpf_prog(%struct.sk_buff*) #0 !dbg !15 {
%2 = alloca %struct.sk_buff*, align 8
%3 = alloca i8, align 1
store %struct.sk_buff* %0, %struct.sk_buff** %2, align 8, !tbaa !45
call void @llvm.dbg.declare(metadata %struct.sk_buff** %2, metadata !43, metadata !DIExpression()), !dbg !49
call void @llvm.lifetime.start.p0i8(i64 1, i8* %3) #4, !dbg !50
call void @llvm.dbg.declare(metadata i8* %3, metadata !44, metadata !DIExpression()), !dbg !51
%4 = load i32 (i8*, i32, i8*)*, i32 (i8*, i32, i8*)** @bpf_probe_read, align 8, !dbg !52, !tbaa !45
%5 = load %struct.sk_buff*, %struct.sk_buff** %2, align 8, !dbg !53, !tbaa !45
%6 = call [10 x %union.anon]* @llvm.preserve.struct.access.index.p0a10s_union.anons.p0s_struct.sk_buffs(
%struct.sk_buff* %5, i32 2, i32 3), !dbg !53, !llvm.preserve.access.index !19
%7 = call %union.anon* @llvm.preserve.array.access.index.p0s_union.anons.p0a10s_union.anons(
[10 x %union.anon]* %6, i32 1, i32 5), !dbg !53
%8 = call %union.anon* @llvm.preserve.union.access.index.p0s_union.anons.p0s_union.anons(
%union.anon* %7, i32 1), !dbg !53, !llvm.preserve.access.index !26
%9 = bitcast %union.anon* %8 to %struct.anon.0*, !dbg !53
%10 = call i8* @llvm.preserve.struct.access.index.p0i8.p0s_struct.anon.0s(
%struct.anon.0* %9, i32 1, i32 1), !dbg !53, !llvm.preserve.access.index !34
%11 = call i32 %4(i8* %3, i32 1, i8* %10), !dbg !52
%12 = load i8, i8* %3, align 1, !dbg !54, !tbaa !55
%13 = sext i8 %12 to i32, !dbg !54
call void @llvm.lifetime.end.p0i8(i64 1, i8* %3) #4, !dbg !56
ret i32 %13, !dbg !57
}
!19 = distinct !DICompositeType(tag: DW_TAG_structure_type, name: "sk_buff", file: !3, line: 1, size: 704, elements: !20)
!26 = distinct !DICompositeType(tag: DW_TAG_union_type, scope: !19, file: !3, line: 5, size: 64, elements: !27)
!34 = distinct !DICompositeType(tag: DW_TAG_structure_type, scope: !26, file: !3, line: 10, size: 16, elements: !35)
Note that @llvm.preserve.{struct,union}.access.index calls have metadata llvm.preserve.access.index
attached to instructions to provide struct/union debuginfo type information.
For &ctx->u[5].dev.dev_id,
. The "%6 = ..." represents struct member "u" with index 2 for IR layout and index 3 for DI layout.
. The "%7 = ..." represents array subscript "5".
. The "%8 = ..." represents union member "dev" with index 1 for DI layout.
. The "%10 = ..." represents struct member "dev_id" with index 1 for both IR and DI layout.
Basically, traversing the use-def chain recursively for the 3rd argument of bpf_probe_read() and
examining all preserve_*_access_index calls, the debuginfo struct/union/array access index
can be achieved.
The intrinsics also contain enough information to regenerate codes for IR layout.
For array and structure intrinsics, the proper GEP can be constructed.
For union intrinsics, replacing all uses of "addr" with "base" should be enough.
Signed-off-by: Yonghong Song <yhs@fb.com>
Differential Revision: https://reviews.llvm.org/D61810
llvm-svn: 365352
This patch adds a function attribute, nofree, to indicate that a function does
not, directly or indirectly, call a memory-deallocation function (e.g., free,
C++'s operator delete).
Reviewers: jdoerfert
Differential Revision: https://reviews.llvm.org/D49165
llvm-svn: 365336
Reintroduces the scalable vector IR type from D32530, after it was reverted
a couple of times due to increasing chromium LTO build times. This latest
incarnation removes the walk over aggregate types from the verifier entirely,
in favor of rejecting scalable vectors in the isValidElementType methods in
ArrayType and StructType. This removes the 70% degradation observed with
the second repro tarball from PR42210.
Reviewers: thakis, hans, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D64079
llvm-svn: 365203
This change is a result of discussions on list: "GlobalISel: Ambiguous intrinsic semantics problem"
Differential Revision: https://reviews.llvm.org/D59657
llvm-svn: 364610
This patch introduces a new function attribute, willreturn, to indicate
that a call of this function will either exhibit undefined behavior or
comes back and continues execution at a point in the existing call stack
that includes the current invocation.
This attribute guarantees that the function does not have any endless
loops, endless recursion, or terminating functions like abort or exit.
Patch by Hideto Ueno (@uenoku)
Reviewers: jdoerfert
Subscribers: mehdi_amini, hiraditya, steven_wu, dexonsmith, lebedev.ri, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D62801
llvm-svn: 364555
We saw a 70% ThinLTO link time increase in Chromium for Android, see
crbug.com/978817. Sounds like more of PR42210.
> Recommit of D32530 with a few small changes:
> - Stopped recursively walking through aggregates in
> the verifier, so that we don't impose too much
> overhead on large modules under LTO (see PR42210).
> - Changed tests to match; the errors are slightly
> different since they only report the array or
> struct that actually contains a scalable vector,
> rather than all aggregates which contain one in
> a nested member.
> - Corrected an older comment
>
> Reviewers: thakis, rengolin, sdesmalen
>
> Reviewed By: sdesmalen
>
> Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 364543
Add the IR and the AsmPrinter parts for handling of the DW_OP_entry_values
DWARF operation.
([11/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60866
llvm-svn: 364542
A unique DISubprogram may be attached to a function declaration used for
call site debug info.
([6/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D60713
llvm-svn: 364500
Introduce the debug info flag that indicates that a parameter has unchanged
value throughout a function. This info will be used to emit the expressions
with DW_OP_entry_value.
([4/13] Introduce the debug entry values.)
Co-authored-by: Ananth Sowda <asowda@cisco.com>
Co-authored-by: Nikola Prica <nikola.prica@rt-rk.com>
Co-authored-by: Ivan Baev <ibaev@cisco.com>
Differential Revision: https://reviews.llvm.org/D58034
llvm-svn: 364406
"To" selects an odd-numbered GPR, and "Te" an even one. There are some
8.1-M instructions that have one too few bits in their register fields
and require registers of particular parity, without necessarily using
a consecutive even/odd pair.
Also, the constraint letter "t" should select an MVE q-register, when
MVE is present. This didn't need any source changes, but some extra
tests have been added.
Reviewers: dmgreen, samparker, SjoerdMeijer
Subscribers: javed.absar, eraman, kristof.beyls, hiraditya, cfe-commits, llvm-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D60709
llvm-svn: 364331
Recommit of D32530 with a few small changes:
- Stopped recursively walking through aggregates in
the verifier, so that we don't impose too much
overhead on large modules under LTO (see PR42210).
- Changed tests to match; the errors are slightly
different since they only report the array or
struct that actually contains a scalable vector,
rather than all aggregates which contain one in
a nested member.
- Corrected an older comment
Reviewers: thakis, rengolin, sdesmalen
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D63321
llvm-svn: 363658
The goal is to improve hwasan's error reporting for stack use-after-return by
recording enough information to allow the specific variable that was accessed
to be identified based on the pointer's tag. Currently we record the PC and
lower bits of SP for each stack frame we create (which will eventually be
enough to derive the base tag used by the stack frame) but that's not enough
to determine the specific tag for each variable, which is the stack frame's
base tag XOR a value (the "tag offset") that is unique for each variable in
a function.
In IR, the tag offset is most naturally represented as part of a location
expression on the llvm.dbg.declare instruction. However, the presence of the
tag offset in the variable's actual location expression is likely to confuse
debuggers which won't know about tag offsets, and moreover the tag offset
is not required for a debugger to determine the location of the variable on
the stack, so at the DWARF level it is represented as an attribute so that
it will be ignored by debuggers that don't know about it.
Differential Revision: https://reviews.llvm.org/D63119
llvm-svn: 363635
I find the current documentation of poison somewhat confusing,
mainly because its use of "undefined behavior" doesn't seem to
align with our usual interpretation (of immediate UB). Especially
the sentence "any instruction that has a dependence on a poison
value has undefined behavior" is very confusing.
Clarify poison semantics by:
* Replacing the introductory paragraph with the standard rationale
for having poison values.
* Spelling out that instructions depending on poison return poison.
* Spelling out how we go from a poison value to immediate undefined
behavior and give the two examples we currently use in ValueTracking.
* Spelling out that side effects depending on poison are UB.
Differential Revision: https://reviews.llvm.org/D63044
llvm-svn: 363320
This patch uses the mechanism from D62995 to strengthen the
definitions of the reduction intrinsics by letting the scalar
result/accumulator type be overloaded from the vector element type.
For example:
; The LLVM LangRef specifies that the scalar result must equal the
; vector element type, but this is not checked/enforced by LLVM.
declare i32 @llvm.experimental.vector.reduce.or.i32.v4i32(<4 x i32> %a)
This patch changes that into:
declare i32 @llvm.experimental.vector.reduce.or.v4i32(<4 x i32> %a)
Which has the type-constraint more explicit and causes LLVM to check
the result type with the vector element type.
Reviewers: RKSimon, arsenm, rnk, greened, aemerson
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D62996
llvm-svn: 363240
This patch changes how LLVM handles the accumulator/start value
in the reduction, by never ignoring it regardless of the presence of
fast-math flags on callsites. This change introduces the following
new intrinsics to replace the existing ones:
llvm.experimental.vector.reduce.fadd -> llvm.experimental.vector.reduce.v2.fadd
llvm.experimental.vector.reduce.fmul -> llvm.experimental.vector.reduce.v2.fmul
and adds functionality to auto-upgrade existing LLVM IR and bitcode.
Reviewers: RKSimon, greened, dmgreen, nikic, simoll, aemerson
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D60261
llvm-svn: 363035
David Green