Other opcodes shouldn't be CSE'd until we can be sure debug info quality won't
be degraded.
This change also improves the IRTranslator so that in most places, but not all,
it creates constants using the MIRBuilder directly instead of first creating a
new destination vreg and then creating a constant. By doing this, the
buildConstant() method can just return the vreg of an existing G_CONSTANT
instead of having to create a COPY from it.
I measured a 0.2% improvement in compile time and a 0.9% improvement in code
size at -O0 ARM64.
Compile time:
Program base cse diff
test-suite...ark/tramp3d-v4/tramp3d-v4.test 9.04 9.12 0.8%
test-suite...Mark/mafft/pairlocalalign.test 2.68 2.66 -0.7%
test-suite...-typeset/consumer-typeset.test 5.53 5.51 -0.4%
test-suite :: CTMark/lencod/lencod.test 5.30 5.28 -0.3%
test-suite :: CTMark/Bullet/bullet.test 25.82 25.76 -0.2%
test-suite...:: CTMark/ClamAV/clamscan.test 6.92 6.90 -0.2%
test-suite...TMark/7zip/7zip-benchmark.test 34.24 34.17 -0.2%
test-suite :: CTMark/SPASS/SPASS.test 6.25 6.24 -0.1%
test-suite...:: CTMark/sqlite3/sqlite3.test 1.66 1.66 -0.1%
test-suite :: CTMark/kimwitu++/kc.test 13.61 13.60 -0.0%
Geomean difference -0.2%
Code size:
Program base cse diff
test-suite...-typeset/consumer-typeset.test 1315632 1266480 -3.7%
test-suite...:: CTMark/ClamAV/clamscan.test 1313892 1297508 -1.2%
test-suite :: CTMark/lencod/lencod.test 1439504 1423112 -1.1%
test-suite...TMark/7zip/7zip-benchmark.test 2936980 2904172 -1.1%
test-suite :: CTMark/Bullet/bullet.test 3478276 3445460 -0.9%
test-suite...ark/tramp3d-v4/tramp3d-v4.test 8082868 8033492 -0.6%
test-suite :: CTMark/kimwitu++/kc.test 3870380 3853972 -0.4%
test-suite :: CTMark/SPASS/SPASS.test 1434904 1434896 -0.0%
test-suite...Mark/mafft/pairlocalalign.test 764528 764528 0.0%
test-suite...:: CTMark/sqlite3/sqlite3.test 782092 782092 0.0%
Geomean difference -0.9%
Differential Revision: https://reviews.llvm.org/D60580
llvm-svn: 358369
Because CodeGen can't depend on GlobalISel, we need a way to encapsulate the CSE
configs that can be passed between TargetPassConfig and the targets' custom
pass configs. This CSEConfigBase allows targets to create custom CSE configs
which is then used by the GISel passes for the CSEMIRBuilder.
This support will be used in a follow up commit to allow constant-only CSE for
-O0 compiles in D60580.
llvm-svn: 358368
Call lowering should use this directly instead of going through the
EVT version, but more work is needed to deal with this (mostly the
passing of the IR type pointer instead of the relevant properties in
ArgInfo).
llvm-svn: 358111
This is consistent with what SelectionDAG does and is much easier to
work with than the extract sequence with an artificial wide register.
For the AMDGPU control flow intrinsics, this was producing an s128 for
the i64, i1 tuple return. Any legalization that should apply to a real
s128 value would badly obscure the direct values that need to be seen.
llvm-svn: 356147
Instead of only having this code work for unary intrinsics, have it work for
an arbitrary number of parameters.
Factor out the cases that fall under this (fma, pow).
This makes it a bit easier to add more intrinsics which don't require any
special work.
Differential Revision: https://reviews.llvm.org/D58079
llvm-svn: 353863
This teaches the IRTranslator to emit G_BSWAP when it runs into
Intrinsic::bswap. This allows us to select G_BSWAP for non-vector types in
AArch64.
Add a select-bswap.mir test, and add global isel checks to a couple existing
tests in test/CodeGen/AArch64.
This doesn't handle every bswap case, since some of these rely on known bits
stuff. This just lets us handle the naive case.
Differential Revision: https://reviews.llvm.org/D58081
llvm-svn: 353861
After the changes introduced in r353586, this instruction doesn't cause any
issues for any backend.
Original review: https://reviews.llvm.org/D57485
llvm-svn: 353720
This patch accompanies the RFC posted here:
http://lists.llvm.org/pipermail/llvm-dev/2018-October/127239.html
This patch adds a new CallBr IR instruction to support asm-goto
inline assembly like gcc as used by the linux kernel. This
instruction is both a call instruction and a terminator
instruction with multiple successors. Only inline assembly
usage is supported today.
This also adds a new INLINEASM_BR opcode to SelectionDAG and
MachineIR to represent an INLINEASM block that is also
considered a terminator instruction.
There will likely be more bug fixes and optimizations to follow
this, but we felt it had reached a point where we would like to
switch to an incremental development model.
Patch by Craig Topper, Alexander Ivchenko, Mikhail Dvoretckii
Differential Revision: https://reviews.llvm.org/D53765
llvm-svn: 353563
There was a lot of repeated code wrt unary math intrinsics in
translateKnownIntrinsic. This factors out the repeated MIRBuilder code into
two functions: translateSimpleUnaryIntrinsic and getSimpleUnaryIntrinsicOpcode.
This simplifies adding simple unary intrinsics, since after this, all you have
to do is add the mapping to SimpleUnaryIntrinsicOpcodes.
Differential Revision: https://reviews.llvm.org/D57774
llvm-svn: 353316
This reverts commit 8bbd570fd5205a04d88d2e5513a6e4adbd028039.
Apparently adding ffloor breaks AMDGPU somehow, so I need to back this out
while I look into it.
llvm-svn: 353064
This adds ISel support for lifetime markers in opt levels above O0.
It also updates the arm64-irtranslator test, and updates some AArch64 tests that
use them for added coverage.
It also adds a testcase taken from the X86 codegen tests which verified a bug
caused by lifetime markers + stack colouring in the past. This is intended to
make sure that GISel doesn't re-introduce the bug.
(This is basically a straight copy from what SelectionDAG does in
SelectionDAGBuilder.cpp)
https://reviews.llvm.org/D57187
llvm-svn: 352410
https://reviews.llvm.org/D57178
Now add a hook in TargetPassConfig to query if CSE needs to be
enabled. By default this hook returns false only for O0 opt level but
this can be overridden by the target.
As a consequence of the default of enabled for non O0, a few tests
needed to be updated to not use CSE (by passing in -O0) to the run
line.
reviewed by: arsenm
llvm-svn: 352126
to reflect the new license.
We understand that people may be surprised that we're moving the header
entirely to discuss the new license. We checked this carefully with the
Foundation's lawyer and we believe this is the correct approach.
Essentially, all code in the project is now made available by the LLVM
project under our new license, so you will see that the license headers
include that license only. Some of our contributors have contributed
code under our old license, and accordingly, we have retained a copy of
our old license notice in the top-level files in each project and
repository.
llvm-svn: 351636
https://reviews.llvm.org/D52803
This patch adds support to continuously CSE instructions during
each of the GISel passes. It consists of a GISelCSEInfo analysis pass
that can be used by the CSEMIRBuilder.
llvm-svn: 351283
This adds a G_FCEIL generic instruction and uses it in AArch64. This adds
selection for floating point ceil where it has a supported, dedicated
instruction. Other cases aren't handled here.
It updates the relevant gisel tests and adds a select-ceil test. It also adds a
check to arm64-vcvt.ll which ensures that we don't fall back when we run into
one of the relevant cases.
llvm-svn: 349664
Summary: This the initial code change to facilitate managing FMF flags from Instructions to MI wrt Intrinsics in Global Isel. Eventually the GlobalObserver interface will be added as well, where FMF additions can be tracked for the builder and CSE.
Reviewers: aditya_nandakumar, bogner
Reviewed By: bogner
Subscribers: rovka, kristof.beyls, javed.absar
Differential Revision: https://reviews.llvm.org/D55668
llvm-svn: 349514
https://reviews.llvm.org/D55294
Previously MachineIRBuilder::buildInstr used to accept variadic
arguments for sources (which were either unsigned or
MachineInstrBuilder). While this worked well in common cases, it doesn't
allow us to build instructions that have multiple destinations.
Additionally passing in other optional parameters in the end (such as
flags) is not possible trivially. Also a trivial call such as
B.buildInstr(Opc, Reg1, Reg2, Reg3)
can be interpreted differently based on the opcode (2defs + 1 src for
unmerge vs 1 def + 2srcs).
This patch refactors the buildInstr to
buildInstr(Opc, ArrayRef<DstOps>, ArrayRef<SrcOps>)
where DstOps and SrcOps are typed unions that know how to add itself to
MachineInstrBuilder.
After this patch, most invocations would look like
B.buildInstr(Opc, {s32, DstReg}, {SrcRegs..., SrcMIBs..});
Now all the other calls (such as buildAdd, buildSub etc) forward to
buildInstr. It also makes it possible to build instructions with
multiple defs.
Additionally in a subsequent patch, we should make it possible to add
flags directly while building instructions.
Additionally, the main buildInstr method is now virtual and other
builders now only have to override buildInstr (for say constant
folding/cseing) is straightforward.
Also attached here (https://reviews.llvm.org/F7675680) is a clang-tidy
patch that should upgrade the API calls if necessary.
llvm-svn: 348815
This patch restricts the capability of G_MERGE_VALUES, and uses the new
G_BUILD_VECTOR and G_CONCAT_VECTORS opcodes instead in the appropriate places.
This patch also includes AArch64 support for selecting G_BUILD_VECTOR of <4 x s32>
and <2 x s64> vectors.
Differential Revisions: https://reviews.llvm.org/D53629
llvm-svn: 348788
Record the stack protector index in MachineFrameInfo when translating
Intrinsic::stackprotector similarly as is done by SelectionDAG when
processing the same intrinsic.
Setting this index allows the Prologue/Epilogue Insertion to recognize
that the stack protection is enabled. The pass can then make sure that
the stack protector comes before local variables on the stack and
assigns potentially vulnerable objects first so they are close to the
stack protector slot.
Differential Revision: https://reviews.llvm.org/D55418
llvm-svn: 348761
The IEEE-754 Standard makes it clear that fneg(x) and
fsub(-0.0, x) are two different operations. The former is a bitwise
operation, while the latter is an arithmetic operation. This patch
creates a dedicated FNeg IR Instruction to model that behavior.
Differential Revision: https://reviews.llvm.org/D53877
llvm-svn: 346774
This adds the llvm-side support for post-inlining evaluation of the
__builtin_constant_p GCC intrinsic.
Also fixed SCCPSolver::visitCallSite to not blow up when seeing a call
to a function where canConstantFoldTo returns true, and one of the
arguments is a struct.
Updated from patch initially by Janusz Sobczak.
Differential Revision: https://reviews.llvm.org/D4276
llvm-svn: 346322
Port over the implementation in SelectionDAGBuilder.cpp into the IRTranslator
and update the arm64-irtranslator test.
These were causing fallbacks in CTMark/Bullet (-Rpass-missed=gisel-select),
and this patch fixes that.
https://reviews.llvm.org/D52945
llvm-svn: 343885
Summary:
We have `llvm::addLandingPadInfo` and `MachineFunction::addLandingPad`,
both of which add landing pad information to populate `LandingPadInfo`
but are called from different locations, which was confusing. This patch
unifies them with one `MachineFunction::addLandingPad` function, which
now has functionlities of both functions.
Reviewers: rnk
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D52428
llvm-svn: 343018
Summary: This patch adds a GlobalIsel copy utility into MI for flags and updates the instruction emitter for the SDAG path. Some tests show new behavior and I added one for GlobalIsel which mirrors an SDAG test for handling nsw/nuw.
Reviewers: spatel, wristow, arsenm
Reviewed By: arsenm
Subscribers: wdng
Differential Revision: https://reviews.llvm.org/D52006
llvm-svn: 342576
https://reviews.llvm.org/D51197
Currently, IRTranslator (and GISel) seems to be arbitrarily picking
which overflow intrinsics get mapped into opcodes which either have a
carry as an input or not.
For intrinsics such as Intrinsic::uadd_with_overflow, translate it to an
opcode (G_UADDO) which doesn't have any carry inputs (similar to LLVM
IR).
This patch adds 4 missing opcodes for completeness - G_UADDO, G_USUBO,
G_SSUBE and G_SADDE.
llvm-svn: 340865
The core get and set routines move to the `Instruction` class. These
routines are only valid to call on instructions which are terminators.
The iterator and *generic* range based access move to `CFG.h` where all
the other generic successor and predecessor access lives. While moving
the iterator here, simplify it using the iterator utilities LLVM
provides and updates coding style as much as reasonable. The APIs remain
pointer-heavy when they could better use references, and retain the odd
behavior of `operator*` and `operator->` that is common in LLVM
iterators. Adjusting this API, if desired, should be a follow-up step.
Non-generic range iteration is added for the two instructions where
there is an especially easy mechanism and where there was code
attempting to use the range accessor from a specific subclass:
`indirectbr` and `br`. In both cases, the successors are contiguous
operands and can be easily iterated via the operand list.
This is the first major patch in removing the `TerminatorInst` type from
the IR's instruction type hierarchy. This change was discussed in an RFC
here and was pretty clearly positive:
http://lists.llvm.org/pipermail/llvm-dev/2018-May/123407.html
There will be a series of much more mechanical changes following this
one to complete this move.
Differential Revision: https://reviews.llvm.org/D47467
llvm-svn: 340698
This reverts commit 7debc334e6421bb5251ef8f18e97166dfc7dd787.
I missed updating legalizer-info-validation.mir as I had assertions
turned off in my build and that specific test requires asserts. Fixed it
now.
llvm-svn: 340197
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 340039
https://reviews.llvm.org/D50401
Add opcodes for llvm.intrinsic.trunc, round, and update the IRTranslator
for the same.
Reviewed by: dsanders.
llvm-svn: 339977
a generically extensible collection of extra info attached to
a `MachineInstr`.
The primary change here is cleaning up the APIs used for setting and
manipulating the `MachineMemOperand` pointer arrays so chat we can
change how they are allocated.
Then we introduce an extra info object that using the trailing object
pattern to attach some number of MMOs but also other extra info. The
design of this is specifically so that this extra info has a fixed
necessary cost (the header tracking what extra info is included) and
everything else can be tail allocated. This pattern works especially
well with a `BumpPtrAllocator` which we use here.
I've also added the basic scaffolding for putting interesting pointers
into this, namely pre- and post-instruction symbols. These aren't used
anywhere yet, they're just there to ensure I've actually gotten the data
structure types correct. I'll flesh out support for these in
a subsequent patch (MIR dumping, parsing, the works).
Finally, I've included an optimization where we store any single pointer
inline in the `MachineInstr` to avoid the allocation overhead. This is
expected to be the overwhelmingly most common case and so should avoid
any memory usage growth due to slightly less clever / dense allocation
when dealing with >1 MMO. This did require several ergonomic
improvements to the `PointerSumType` to reasonably support the various
usage models.
This also has a side effect of freeing up 8 bits within the
`MachineInstr` which could be repurposed for something else.
The suggested direction here came largely from Hal Finkel. I hope it was
worth it. ;] It does hopefully clear a path for subsequent extensions
w/o nearly as much leg work. Lots of thanks to Reid and Justin for
careful reviews and ideas about how to do all of this.
Differential Revision: https://reviews.llvm.org/D50701
llvm-svn: 339940
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 339676
Previously we were just visiting the blocks in the function in IR order, which
is rather arbitrary. Therefore we wouldn't always visit defs before uses, but
the translation code relies on this assumption in some places.
Only codegen change seen in tests is an elision of a redundant copy.
Fixes PR38396
llvm-svn: 338476
There are two forms for label debug information in DWARF format.
1. Labels in a non-inlined function:
DW_TAG_label
DW_AT_name
DW_AT_decl_file
DW_AT_decl_line
DW_AT_low_pc
2. Labels in an inlined function:
DW_TAG_label
DW_AT_abstract_origin
DW_AT_low_pc
We will collect label information from DBG_LABEL. Before every DBG_LABEL,
we will generate a temporary symbol to denote the location of the label.
The symbol could be used to get DW_AT_low_pc afterwards. So, we create a
mapping between 'inlined label' and DBG_LABEL MachineInstr in DebugHandlerBase.
The DBG_LABEL in the mapping is used to query the symbol before it.
The AbstractLabels in DwarfCompileUnit is used to process labels in inlined
functions.
We also keep a mapping between scope and labels in DwarfFile to help to
generate correct tree structure of DIEs.
It also generates label debug information under global isel.
Differential Revision: https://reviews.llvm.org/D45556
llvm-svn: 338390
This re-applies r336929 with a fix to accomodate for the Mips target
scheduling multiple SelectionDAG instances into the pass pipeline.
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336964
PrologEpilogInserter and StackColoring depend on the StackProtector analysis
being alive from the point it is run until PEI, which requires that they are all
scheduled in the same FunctionPassManager. Inserting a (machine) ModulePass
between StackProtector and PEI results in these passes being in separate
FunctionPassManagers and the StackProtector is not available for PEI.
PEI and StackColoring don't use much information from the StackProtector pass,
so transfering the required information to MachineFrameInfo is cleaner than
keeping the StackProtector pass around. This commit moves the SSP layout
information to MFI instead of keeping it in the pass.
This patch set (D37580, D37581, D37582, D37583, D37584, D37585, D37586, D37587)
is a first draft of the pagerando implementation described in
http://lists.llvm.org/pipermail/llvm-dev/2017-June/113794.html.
Patch by Stephen Crane <sjc@immunant.com>
Differential Revision: https://reviews.llvm.org/D49256
llvm-svn: 336929
Summary:
This patch adds support for the atomicrmw instructions and the strong
cmpxchg instruction to the IRTranslator.
I've left out weak cmpxchg because LangRef.rst isn't entirely clear on what
difference it makes to the backend. As far as I can tell from the code, it
only matters to AtomicExpandPass which is run at the LLVM-IR level.
Reviewers: ab, t.p.northover, qcolombet, rovka, aditya_nandakumar, volkan, javed.absar
Reviewed By: qcolombet
Subscribers: kristof.beyls, javed.absar, igorb, llvm-commits
Differential Revision: https://reviews.llvm.org/D40092
llvm-svn: 336589
We currently handle all aggregates by creating one large LLT, and letting the
legalizer deal with splitting them up. However using this approach means that
we can't support big endian code correctly.
This patch changes the way that the IRTranslator deals with aggregate values,
by splitting them up into their constituent element values. To do this, parts
of the translator need to be modified to deal with multiple VRegs for a single
Value.
A new Value to VReg mapper is introduced to help keep compile time under
control, currently there is no measurable impact on CTMark despite the extra
code being generated in some cases.
Patch is based on the original work of Tim Northover.
Differential Revision: https://reviews.llvm.org/D46018
llvm-svn: 332449
The DEBUG() macro is very generic so it might clash with other projects.
The renaming was done as follows:
- git grep -l 'DEBUG' | xargs sed -i 's/\bDEBUG\s\?(/LLVM_DEBUG(/g'
- git diff -U0 master | ../clang/tools/clang-format/clang-format-diff.py -i -p1 -style LLVM
- Manual change to APInt
- Manually chage DOCS as regex doesn't match it.
In the transition period the DEBUG() macro is still present and aliased
to the LLVM_DEBUG() one.
Differential Revision: https://reviews.llvm.org/D43624
llvm-svn: 332240
Summary:
Fabs is a common floating-point operation, especially for some expansions. This patch adds
a new generic opcode for llvm.fabs.* intrinsic in order to avoid building/matching this intrinsic.
Reviewers: qcolombet, aditya_nandakumar, dsanders, rovka
Reviewed By: aditya_nandakumar
Subscribers: kristof.beyls, javed.absar, llvm-commits
Differential Revision: https://reviews.llvm.org/D43864
llvm-svn: 326749
This makes sure that alloca() function calls properly probe the
stack as needed.
Differential Revision: https://reviews.llvm.org/D42356
llvm-svn: 325433
A call may have an intrinsic name but not have a valid intrinsic ID,
for example with llvm.invariant.group.barrier. If so, treat it as a
normal call like FastISel does.
llvm-svn: 321662
Rather than adding more bits to express every
MMO flag you could want, just directly use the
MMO flags. Also fixes using a bunch of bool arguments to
getMemIntrinsicNode.
On AMDGPU, buffer and image intrinsics should always
have MODereferencable set, but currently there is no
way to do that directly during the initial intrinsic
lowering.
llvm-svn: 320746
This is due to PR26161 needing to be resolved before we can fix
big endian bugs like PR35359. The work to split aggregates into smaller LLTs
instead of using one large scalar will take some time, so in the mean time
we'll fall back to SDAG.
Some ARM BE tests xfailed for now as a result.
Differential Revision: https://reviews.llvm.org/D40789
llvm-svn: 320388
This patch splits atomics out of the generic G_LOAD/G_STORE and into their own
G_ATOMIC_LOAD/G_ATOMIC_STORE. This is a pragmatic decision rather than a
necessary one. Atomic load/store has little in implementation in common with
non-atomic load/store. They tend to be handled very differently throughout the
backend. It also has the nice side-effect of slightly improving the common-case
performance at ISel since there's no longer a need for an atomicity check in the
matcher table.
All targets have been updated to remove the atomic load/store check from the
G_LOAD/G_STORE path. AArch64 has also been updated to mark
G_ATOMIC_LOAD/G_ATOMIC_STORE legal.
There is one issue with this patch though which also affects the extending loads
and truncating stores. The rules only match when an appropriate G_ANYEXT is
present in the MIR. For example,
(G_ATOMIC_STORE (G_TRUNC:s16 (G_ANYEXT:s32 (G_ATOMIC_LOAD:s16 X))))
will match but:
(G_ATOMIC_STORE (G_ATOMIC_LOAD:s16 X))
will not. This shouldn't be a problem at the moment, but as we get better at
eliminating extends/truncates we'll likely start failing to match in some
cases. The current plan is to fix this in a patch that changes the
representation of extending-load/truncating-store to allow the MMO to describe
a different type to the operation.
llvm-svn: 319691
This is needed for cases when the memory access is not as big as the width of
the data type. For instance, storing i1 (1 bit) would be done in a byte (8
bits).
Using 'BitSize >> 3' (or '/ 8') would e.g. give the memory access of an i1 a
size of 0, which for instance makes alias analysis return NoAlias even when
it shouldn't.
There are no tests as this was done as a follow-up to the bugfix for the case
where this was discovered (r318824). This handles more similar cases.
Review: Björn Petterson
https://reviews.llvm.org/D40339
llvm-svn: 319173
All these headers already depend on CodeGen headers so moving them into
CodeGen fixes the layering (since CodeGen depends on Target, not the
other way around).
llvm-svn: 318490
This header already includes a CodeGen header and is implemented in
lib/CodeGen, so move the header there to match.
This fixes a link error with modular codegeneration builds - where a
header and its implementation are circularly dependent and so need to be
in the same library, not split between two like this.
llvm-svn: 317379
r313390 taught 'allowExtraAnalysis' to check whether remarks are
enabled at all. Use that to only do the expensive instruction printing
if they are.
llvm-svn: 313552
G_PHI has the same semantics as PHI but also has types.
This lets us verify that the types in the G_PHI are consistent.
This also allows specifying legalization actions for G_PHIs.
https://reviews.llvm.org/D36990
llvm-svn: 311596
There is no situation where this rarely-used argument cannot be
substituted with a DIExpression and removing it allows us to simplify
the DWARF backend. Note that this patch does not yet remove any of
the newly dead code.
rdar://problem/33580047
Differential Revision: https://reviews.llvm.org/D35951
llvm-svn: 309426
OpenCL 2.0 introduces the notion of memory scopes in atomic operations to
global and local memory. These scopes restrict how synchronization is
achieved, which can result in improved performance.
This change extends existing notion of synchronization scopes in LLVM to
support arbitrary scopes expressed as target-specific strings, in addition to
the already defined scopes (single thread, system).
The LLVM IR and MIR syntax for expressing synchronization scopes has changed
to use *syncscope("<scope>")*, where <scope> can be "singlethread" (this
replaces *singlethread* keyword), or a target-specific name. As before, if
the scope is not specified, it defaults to CrossThread/System scope.
Implementation details:
- Mapping from synchronization scope name/string to synchronization scope id
is stored in LLVM context;
- CrossThread/System and SingleThread scopes are pre-defined to efficiently
check for known scopes without comparing strings;
- Synchronization scope names are stored in SYNC_SCOPE_NAMES_BLOCK in
the bitcode.
Differential Revision: https://reviews.llvm.org/D21723
llvm-svn: 307722
G_SEQUENCE is going away soon so as a first step the MachineIRBuilder needs to
be taught how to emulate it with alternatives. We use G_MERGE_VALUES where
possible, and a sequence of G_INSERTs if not.
llvm-svn: 306119
I did this a long time ago with a janky python script, but now
clang-format has built-in support for this. I fed clang-format every
line with a #include and let it re-sort things according to the precise
LLVM rules for include ordering baked into clang-format these days.
I've reverted a number of files where the results of sorting includes
isn't healthy. Either places where we have legacy code relying on
particular include ordering (where possible, I'll fix these separately)
or where we have particular formatting around #include lines that
I didn't want to disturb in this patch.
This patch is *entirely* mechanical. If you get merge conflicts or
anything, just ignore the changes in this patch and run clang-format
over your #include lines in the files.
Sorry for any noise here, but it is important to keep these things
stable. I was seeing an increasing number of patches with irrelevant
re-ordering of #include lines because clang-format was used. This patch
at least isolates that churn, makes it easy to skip when resolving
conflicts, and gets us to a clean baseline (again).
llvm-svn: 304787
Make sure IRTranslator->MachineIRBuilder->DebugLoc doesn't
outlive the DILocation. Clear it at the end of
IRTranslator::runOnMachineFunction
llvm-svn: 303277
This exposes a method in MachineFrameInfo that calculates
MaxCallFrameSize and calls it after instruction selection in the ARM
target.
This avoids
ARMBaseRegisterInfo::canRealignStack()/ARMFrameLowering::hasReservedCallFrame()
giving different answers in early/late phases of codegen.
The testcase shows a particular nasty example result of that where we
would fail to properly align an alloca.
Differential Revision: https://reviews.llvm.org/D32622
llvm-svn: 302303
Adds a new method finalizeLowering to TargetLoweringBase. This is in
preparation for an upcoming commit.
This function is meant for target specific adjustments to
MachineFrameInfo or register reservations.
Move the freezeRegisters() and the hasCopyImplyingStackAdjustment()
handling into the new function to prove the concept. As an added bonus
GlobalISel no longer missed the hasCopyImplyingStackAdjustment()
handling with this.
Differential Revision: https://reviews.llvm.org/D32621
llvm-svn: 301679
This showed up in r300535/r300537, which were reverted in r300538 due to
some of the introduced tests in there failing on some bots, due to the
non-determinism fixed in this commit.
Re-committing r300535/r300537 will add 2 tests for the change in this
commit.
llvm-svn: 300663
This patch changes the behavior of IRTranslating intrinsics where we
now create VREG + G_CONSTANT for ConstantInt values. We already do this
for FloatingPoint values. This makes it easier for the backends to
select code and it won't have to de-duplicate creation+selection of
constants.
Reviewed by: ab
llvm-svn: 298473
MI can represent fallthrough to layout successor blocks, and our
post-isel representation uses that extensively.
We might as well use it too, to avoid translating and carrying along
unnecessary branches.
llvm-svn: 298459
This commit adds a parameter that lets us pass in the calling convention
of the call to CallLowering::lowerCall. This allows us to handle
situations where the calling convetion of the callee is different from
that of the caller.
Differential Revision: https://reviews.llvm.org/D31039
llvm-svn: 298254
Currently, we create a G_CONSTANT for every "synthetic" integer
constant operand (for instance, for the G_GEP offset).
Instead, share the G_CONSTANTs we might have created by going through
the ValueToVReg machinery.
When we're emitting synthetic constants, we do need to get Constants from
the context. One could argue that we shouldn't modify the context at
all (for instance, this means that we're going to use a tad more memory
if the constant wasn't used elsewhere), but constants are mostly
harmless. We currently do this for extractvalue and all.
For constant fcmp, this does mean we'll emit an extra COPY, which is not
necessarily more optimal than an extra materialized constant.
But that preserves the current intended design of uniqued G_CONSTANTs,
and the rematerialization problem exists elsewhere and should be
resolved with a single coherent solution.
llvm-svn: 297875
Now that we preserve the IR layout, we would end up with all the newly
synthesized switch comparison blocks at the end of the function.
Instead, use a hopefully more reasonable layout, with the comparison
blocks immediately following the switch comparison blocks.
llvm-svn: 297869
It makes the output function layout more predictable; the layout has
an effect on performance, we don't want it to be at the mercy of the
translator's visitation order and such.
The predictable output is also easier to digest.
getOrCreateBB isn't appropriately named anymore, as it never needs to
create anything. Rename it and extract the MBB creation logic out of it.
A couple tests were sensitive to the order. Update them.
llvm-svn: 297868
Summary:
<1 x Ty> is not a legal vector type in LLT, we shouldn’t build G_MERGE_VALUES
instruction for them.
Reviewers: qcolombet, aditya_nandakumar, dsanders, t.p.northover, ab, javed.absar
Reviewed By: qcolombet
Subscribers: dberris, rovka, kristof.beyls, llvm-commits
Differential Revision: https://reviews.llvm.org/D30948
llvm-svn: 297792
We don't need to check whether the fallback path is enabled to return
false. Just do that all the time on error cases, the caller knows (or
at least should know!) how to handle the failing case.
llvm-svn: 297535
The good reason to do this is that static allocas are pretty simple to handle
(especially at -O0) and avoiding tracking DBG_VALUEs throughout the pipeline
should give some kind of performance benefit.
The bad reason is that the debug pipeline is an unholy mess of implicit
contracts, where determining whether "DBG_VALUE %reg, imm" actually implies a
load or not involves the services of at least 3 soothsayers and the sacrifice
of at least one chicken. And it still gets it wrong if the variable is at SP
directly.
llvm-svn: 297410
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
The problem with the previous commit appears to have been that TableGen was including CodeGen/LowLevelType.h instead of Support/LowLevelTypeImpl.h.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297241
Some intrinsics take metadata parameters. These all need custom
handling of some form, and cannot possibly be lowered generically to
G_INTRINSIC calls with vreg operands.
Reject them, instead of hitting an assert later in getOrCreateVReg.
llvm-svn: 297209
When we translate a no-op (same type) bitcast, we try to be clever and
only emit a COPY if we already assigned a vreg to the defined value.
However, when we didn't, we tried to assign to a reference into the
ValToVReg DenseMap, even though the RHS of the assignment
(getOrCreateVReg) could potentially grow that DenseMap, invalidating the
reference.
Avoid that by getting the source vreg first.
I audited the rest of the translator; this is the only tricky case.
The test is quite unwieldy, as the problem is caused by the DenseMap
growing, which happens after the 47th mapped value.
llvm-svn: 297208
More module problems. This time it only showed up in the stage 2 compile of
clang-x86_64-linux-selfhost-modules-2 but not the stage 1 compile.
Somehow, this change causes the build to need Attributes.gen before it's been
generated.
llvm-svn: 297188
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 297177
A bit more painful than G_INSERT because it was more widely used, but this
should simplify the handling of extract operations in most locations.
llvm-svn: 297100
Summary:
This will allow future patches to inspect the details of the LLT. The implementation is now split between
the Support and CodeGen libraries to allow TableGen to use this class without introducing layering concerns.
Thanks to Ahmed Bougacha for finding a reasonable way to avoid the layering issue and providing the version of this patch without that problem.
Reviewers: t.p.northover, qcolombet, rovka, aditya_nandakumar, ab, javed.absar
Subscribers: arsenm, nhaehnle, mgorny, dberris, llvm-commits, kristof.beyls
Differential Revision: https://reviews.llvm.org/D30046
llvm-svn: 296474
We were stopping the translation of the parent block when the
translation of an instruction failed, but we were still trying to
translate the other blocks of the parent function.
Don't do that.
llvm-svn: 296047
Having more fine-grained information on the specific construct that
caused us to fallback is valuable for large-scale data collection.
We still have the fallback warning, that's also used for FastISel.
We still need to remove the fallback warning, and teach FastISel to also
emit remarks (it currently has a combination of the warning, stats, and
debug prints: the remarks could unify all three).
The abort-on-fallback path could also be better handled using remarks:
one could imagine a "-Rpass-error", analoguous to "-Werror", which would
promote missed/failed remarks to errors. It's not clear whether that
would be useful for other remarks though, so we're not there yet.
llvm-svn: 296013
This instruction clears the low bits of a pointer without requiring (possibly
dodgy if pointers aren't ints) conversions to and from an integer. Since (as
far as I'm aware) all masks are statically known, the instruction takes an
immediate operand rather than a register to specify the mask.
llvm-svn: 295103
It'll usually be immediately legalized back to a libcall, but occasionally
something can be done with it so we'd just as well enable that flexibility from
the start.
llvm-svn: 294530
Well, sort of. But the lower-level code that invoke used to be using completely
botched the handling of varargs functions, which hopefully won't be possible if
they're using the same code.
llvm-svn: 293670
For some reason the exception selector register must be a pointer (that's
assumed by SDag); on the other hand, it gets moved into an IR-level type which
might be entirely different (i32 on AArch64). IRTranslator needs to be aware of
this.
llvm-svn: 293546
We have to delete the block manually or it leaks. That triggers failures in
-fsanitize=leak bots (unsurprisingly), which should be fixed by this patch.
llvm-svn: 293347
The translation scheme is mostly cribbed from FastISel, and it's not entirely
convincing semantically. But it does seem to work in the common cases and allow
variables to be printed so it can't be all wrong.
llvm-svn: 293228
There was a bug here where we were using p0 instead of s32 for the
selector type in the landingpad. Instead of hardcoding these types we
should get the types from the landingpad instruction directly.
Note that we replicate an assert from SDAG here to only support
two-valued landingpads.
llvm-svn: 292995
Translating the constant can create more VRegs, which can invalidate the
reference into the DenseMap. So we have to look up the value again after all
that's happened.
llvm-svn: 292675
It's easier to test the non-fallback path if we just drop these
intrinsics for now, like we did before we added the fallback path.
We'll obviously need to fix this properly, but the fixme for that is
already here.
llvm-svn: 292547
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
This reapplies r291973 which was reverted because of testing failures. Fixes:
+ Don't return an ArrayRef to a local temporary.
+ Incorporate Kristof's suggested comment improvements.
llvm-svn: 292278
This reverts commit r291973.
The test fails in a Release build with LLVM_BUILD_GLOBAL_ISEL enabled.
AFAICT, llc segfaults. I'll add a few more details to the original
commit.
llvm-svn: 292061
Correctly populating Machine PHIs relies on knowing exactly how the IR level
CFG was lowered to MachineIR. This needs to be tracked by any translation
phases that meddle (currently only SwitchInst handling).
llvm-svn: 291973
To make this work, pointers from the MachineBasicBlock to the LLVM-IR-level
basic blocks need to be initialized, as the AsmPrinter uses this link to be
able to print out labels for the basic blocks that are address-taken.
Most of the changes in this commit are about adapting existing tests to include
the basic block name that is now printed out in the MIR format, now that the
name becomes available as the link to the LLVM-IR basic block is initialized.
The relevant test change for the functionality added in this patch are the
added "(address-taken)" strings in
test/CodeGen/AArch64/GlobalISel/arm64-irtranslator.ll.
Differential Revision: https://reviews.llvm.org/D28123
llvm-svn: 291105
This commit does this using a trivial chain of conditional branches. In the
future, we probably want to reuse the optimized switch lowering used in
SelectionDAG.
Differential Revision: https://reviews.llvm.org/D28176
llvm-svn: 291099
The IRTranslator uses an additional block before the LLVM-IR entry block
to perform all the ABI lowering and the constant hoisting. Thus, this
block is the actual entry block and it falls through the LLVM-IR entry
block. However, with such representation, we end up with two basic
blocks that are not maximal.
Therefore, this patch adds a bit of canonicalization by merging both the
LLVM-IR entry block and the ABI lowering/constants hoisting into one
block, making the resulting block more likely to be maximal (indeed the
LLVM-IR entry block might not have been maximal).
llvm-svn: 289891
Supporting them properly is a reasonably complex chunk of work, so to allow bot
testing before then we should at least be able to fall back to DAG ISel.
llvm-svn: 289150
ConstantExpr instances were emitting code into the current block rather than
the entry block. This meant they didn't necessarily dominate all uses, which is
clearly wrong.
llvm-svn: 288985
Having to ask the MIRBuilder for the current function is a little awkward, and
I'm intending to improve how that's threaded through anyway.
llvm-svn: 288983
MachineIRBuilder had weird before/after and beginning/end flags for the insert
point. Unfortunately the non-default means that instructions will be inserted
in reverse order which is almost never what anyone wants.
Really, I think we just want (like IRBuilder has) the ability to insert at any
C++ iterator-style point (i.e. before any instruction or before MBB.end()). So
this fixes MIRBuilders to behave like IRBuilders in this respect.
llvm-svn: 288980
The function used to finish off PHIs by adding the relevant basic blocks can
fail if we're aborting and still don't actually have the needed
MachineBasicBlocks. So avoid trying in that case.
llvm-svn: 288727
When the entry block was empty after arg lowering, we were always placing
constants at the end. This is probably hamrless while translating the same
block, but horribly wrong once its terminator has been translated. So switch to
inserting at the beginning.
llvm-svn: 288720
This makes it more similar to the floating-point constant, and also allows for
larger constants to be translated later. There's no real functional change in
this patch though, just syntax updates.
llvm-svn: 288712
Returning 0 (NoReg) from getOrCreateVReg leads to unexpected situations later
in the translation. It's better to return a valid (if undefined) register and
let the rest of the instruction carry on as planned.
llvm-svn: 288709
Recommitting r288293 with some extra fixes for GlobalISel code.
Most of the exception handling members in MachineModuleInfo is actually
per function data (talks about the "current function") so it is better
to keep it at the function instead of the module.
This is a necessary step to have machine module passes work properly.
Also:
- Rename TidyLandingPads() to tidyLandingPads()
- Use doxygen member groups instead of "//===- EH ---"... so it is clear
where a group ends.
- I had to add an ugly const_cast at two places in the AsmPrinter
because the available MachineFunction pointers are const, but the code
wants to call tidyLandingPads() in between
(markFunctionEnd()/endFunction()).
Differential Revision: https://reviews.llvm.org/D27227
llvm-svn: 288405
They're not SelectionDAG- or FunctionLoweringInfo-specific. They
are, however, specific to building MMI from IR.
We could make them members, but it's nice having MMI be a "simple" data
structure and this logic kept separate.
This also lets us reuse them from GlobalISel.
llvm-svn: 287167
The only implementation that exists immediately looks it up anyway, and the
information is needed to handle various parameter attributes (stored on the
function itself).
llvm-svn: 282068
This should match the existing behaviour for passing complicated struct and
array types, in particular HFAs come through like that from Clang.
For C & C++ we still need to somehow support all the weird ABI flags, or at
least those that are present in the IR (signext, byval, ...), and stack-based
parameter passing.
llvm-svn: 281977
Otherwise everything that needs to work out what size they are has to keep a
DataLayout handy, which is a bit silly and very annoying.
llvm-svn: 281597
Unlike SDag, we use a separate G_GEP instruction (much simplified, only taking
a single byte offset) to preserve the pointer type information through
selection.
llvm-svn: 281205
These instructions were only necessary when type information was stored in the
MachineInstr (because only generic MachineInstrs possessed a type). Now that
it's in MachineRegisterInfo, COPY and PHI work fine.
llvm-svn: 281037
We want each register to have a canonical type, which means the best place to
store this is in MachineRegisterInfo rather than on every MachineInstr that
happens to use or define that register.
Most changes following from this are pretty simple (you need an MRI anyway if
you're going to be doing any transformations, so just check the type there).
But legalization doesn't really want to check redundant operands (when, for
example, a G_ADD only ever has one type) so I've made use of MCInstrDesc's
operand type field to encode these constraints and limit legalization's work.
As an added bonus, more validation is possible, both in MachineVerifier and
MachineIRBuilder (coming soon).
llvm-svn: 281035
They're another source of generic vregs, which are going to need a type on the
definition when we remove the register width from MachineRegisterInfo.
llvm-svn: 280412
There should be no functional change here, I'm just making the implementation
of "frem" (to libcall) legalization easier for a followup.
llvm-svn: 279987
This adds a G_INSERT instruction, which technically makes G_SEQUENCE redundant
(it's equivalent to a G_INSERT into an IMPLICIT_DEF). We'll leave G_SEQUENCE
for now though: it's likely to be far more common as it's a fundamental part of
legalization, so avoiding the mess and bloat of the extra IMPLICIT_DEFs is
probably worthwhile.
llvm-svn: 279306
First, make sure all types involved are represented, rather than being implicit
from the register width.
Second, canonicalize all types to scalar. These operations just act in bits and
don't care about vectors.
Also standardize spelling of Indices in the MachineIRBuilder (NFC here).
llvm-svn: 279294
Unsigned addition and subtraction can reuse the instructions created to
legalize large width operations (i.e. both produce and consume a carry flag).
Signed operations and multiplies get a dedicated op-with-overflow instruction.
Once this is produced the two values are combined into a struct register (which
will almost always be merged with a corresponding G_EXTRACT as part of
legalization).
llvm-svn: 279278
It's sharing the integer G_CONSTANT for now since I don't *think* it creates
any ambiguity (even on weird archs). If that turns out wrong we can create a
G_PTRCONSTANT or something.
llvm-svn: 278423
It's more than just inttoptr, but the others can't be tested until we have
support for non-trivial constants (they currently get unavoidably folded to a
ConstantInt).
llvm-svn: 278303
If the value produced by the bitcast hasn't been referenced yet, we can simply
reuse the input register avoiding an unnecessary COPY instruction.
llvm-svn: 278245
For now put them all in the entry block. This should be correct but may give
poor runtime performance. Hopefully MachineSinking combined with
isReMaterializable can solve those issues, but if not the interface is sound
enough to support alternatives.
llvm-svn: 278168
These come in two variants for now: G_INTRINSIC and G_INTRINSIC_W_SIDE_EFFECTS.
We may decide to split the latter up with finer-grained restrictions later, if
necessary.
llvm-svn: 277224
For MachineInstrBuilder, having to manually use RegState::Define is ugly and
makes register definitions clunkier than they need to be, so this adds two
convenience functions: addDef and addUse.
For MachineIRBuilder, we want to avoid BuildMI's first-reg-is-def rule because
it's hidden away and causes bugs. So this patch switches buildInstr to
returning a MachineInstrBuilder and adding *all* operands via addDef/addUse.
NFC.
llvm-svn: 277176
Instead of an ad-hoc collection of "buildInstr" functions with varying numbers
of registers, this uses variadic templates to provide for as many regs as
needed!
Also make IRtranslator use new "buildBr" function instead of some weird generic
one that no-one else would really use.
llvm-svn: 276762
This adds LLVM's 3 main cast instructions (inttoptr, ptrtoint, bitcast) to the
IRTranslator. The first two are direct translations (with 2 MachineInstr types
each). Since LLT discards information, a bitcast might become trivial and we
emit a COPY in those cases instead.
llvm-svn: 276690
This should be all the low-level instruction selection needs to determine how
to implement an operation, with the remaining context taken from the opcode
(e.g. G_ADD vs G_FADD) or other flags not based on type (e.g. fast-math).
llvm-svn: 276158
We can freeze the registers after the MachineFrameInfo has been configured (by
telling it about calls, inline asm, ...). This doesn't happen at all yet, but
will be part of IR translation.
Fixes -verify-machineinstrs assertion.
llvm-svn: 275221
Amara Emerson