As suggested on D113371, this adds a wrapper to SelectionDAG::ComputeNumSignBits, similar to the llvm::ComputeMinSignedBits wrapper.
I've included some usage, its not exhaustive, just the more obvious cases where the intention is obvious.
Differential Revision: https://reviews.llvm.org/D113396
Instead of returning a bool to indicate success and a separate
SDValue, return the SDValue and have the callers check if it is
null.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112331
There is no need to return a bool and have an SDValue output
parameter. Just return the SDValue and let the caller check if it
is null.
I have another patch to add more callers of these so I thought
I'd clean up the interface first.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D112267
Our fallback expansion for CTLZ/CTTZ relies on CTPOP. If CTPOP
isn't legal or custom for a vector type we would scalarize the
CTLZ/CTTZ. This is different than CTPOP itself which would use a
vector expansion.
This patch teaches expandCTLZ/CTTZ to rely on the vector CTPOP
expansion instead of scalarizing. To do this I had to add additional
checks to make sure the operations used by CTPOP expansions are all
supported. Some of the operations were already needed for the CTLZ/CTTZ
expansion.
This is a huge improvement to the RISCV which doesn't have a scalar
ctlz or cttz in the base ISA.
For WebAssembly, I've added Custom lowering to keep the scalarizing
behavior. I've also extended the scalarizing to CTPOP.
Differential Revision: https://reviews.llvm.org/D111919
When inserting a scalable subvector into a scalable vector through
the stack, the index to store to needs to be scaled by vscale.
Before this patch, that didn't yet happen, so it would generate the
wrong offset, thus storing a subvector to the incorrect address
and overwriting the wrong lanes.
For some insert:
nxv8f16 insert_subvector(nxv8f16 %vec, nxv2f16 %subvec, i64 2)
The offset was not scaled by vscale:
orr x8, x8, #0x4
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8]
ld1h { z0.h }, p0/z, [sp]
And is changed to:
mov x8, sp
st1h { z0.h }, p0, [sp]
st1h { z1.d }, p1, [x8, #1, mul vl]
ld1h { z0.h }, p0/z, [sp]
Differential Revision: https://reviews.llvm.org/D111633
Inspired by D111968, provide a isNegatedPowerOf2() wrapper instead of obfuscating code with (-Value).isPowerOf2() patterns, which I'm sure are likely avenues for typos.....
Differential Revision: https://reviews.llvm.org/D111998
Stop using APInt constructors and methods that were soft-deprecated in
D109483. This fixes all the uses I found in llvm, except for the APInt
unit tests which should still test the deprecated methods.
Differential Revision: https://reviews.llvm.org/D110807
While these functions are only used in one location in upstream,
it has been reused in multiple downstreams. Restore this file to
a globally visibile location (outside of APInt.h) to eliminate
donwstream breakage and enable potential future reuse.
Additionally, this patch renames types and cleans up
clang-tidy issues.
APInt is used to describe a bit mask in a variety of value tracking and demanded bits/elts functions.
When traversing through dst/src operands, we have a number of places where these masks need to widened/narrowed to translate through bitcasts, reductions etc. to a different type.
This patch add a APIntOps::ScaleBitMask common helper, adds unit test coverage, and updates a number of cases to use the the helper instead of their own implementation.
This came up on D109065 where we currently have to add yet another implementation of the same code.
Differential Revision: https://reviews.llvm.org/D109683
Soft deprecrate isNullValue/isAllOnesValue and update in tree
callers. This matches the changes to the APInt interface from
D109483.
Reviewed By: lattner
Differential Revision: https://reviews.llvm.org/D109535
This renames the primary methods for creating a zero value to `getZero`
instead of `getNullValue` and renames predicates like `isAllOnesValue`
to simply `isAllOnes`. This achieves two things:
1) This starts standardizing predicates across the LLVM codebase,
following (in this case) ConstantInt. The word "Value" doesn't
convey anything of merit, and is missing in some of the other things.
2) Calling an integer "null" doesn't make any sense. The original sin
here is mine and I've regretted it for years. This moves us to calling
it "zero" instead, which is correct!
APInt is widely used and I don't think anyone is keen to take massive source
breakage on anything so core, at least not all in one go. As such, this
doesn't actually delete any entrypoints, it "soft deprecates" them with a
comment.
Included in this patch are changes to a bunch of the codebase, but there are
more. We should normalize SelectionDAG and other APIs as well, which would
make the API change more mechanical.
Differential Revision: https://reviews.llvm.org/D109483
This moves one mid-size function out of line, inlines the
trivial tcAnd/tcOr/tcXor/tcComplement methods into their only
caller, and moves the magic/umagic functions into SelectionDAG
since they are implementation details of its algorithm. This
also removes the unit tests for magic, but these are already
tested in the divide lowering logic for various targets.
This also upgrades some C style comments to C++.
Differential Revision: https://reviews.llvm.org/D109476
Pulled out of D109149, this folds set_cc seteq (ashr X, BW-1), -1 ->
set_cc setlt X, 0 to prevent some regressions later on when folding
select_cc setgt X, -1, C, ~C -> xor (ashr X, BW-1), C
Differential Revision: https://reviews.llvm.org/D109214
Please refer to
https://lists.llvm.org/pipermail/llvm-dev/2021-September/152440.html
(and that whole thread.)
TLDR: the original patch had no prior RFC, yet it had some changes that
really need a proper RFC discussion. It won't be productive to discuss
such an RFC, once it's actually posted, while said patch is already
committed, because that introduces bias towards already-committed stuff,
and the tree is potentially in broken state meanwhile.
While the end result of discussion may lead back to the current design,
it may also not lead to the current design.
Therefore i take it upon myself
to revert the tree back to last known good state.
This reverts commit 4c4093e6e3.
This reverts commit 0a2b1ba33a.
This reverts commit d9873711cb.
This reverts commit 791006fb8c.
This reverts commit c22b64ef66.
This reverts commit 72ebcd3198.
This reverts commit 5fa6039a5f.
This reverts commit 9efda541bf.
This reverts commit 94d3ff09cf.
I believe, the profitability reasoning here is correct
"sub"reg is already located within the 0'th subreg of wider reg,
so if we have suvector insertion at index 0 into undef,
then it's always free do to.
After this, D109065 finally avoids the regression in D108382.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D109074
When expanding a SMULFIXSAT ISD node (usually originating from
a smul.fix.sat intrinsic) we've applied some optimizations for
the special case when the scale is zero. The idea has been that
it would be cheaper to use an SMULO instruction (if legal) to
perform the multiplication and at the same time detect any overflow.
And in case of overflow we could use some SELECT:s to replace the
result with the saturated min/max value. The only tricky part
is to know if we overflowed on the min or max value, i.e. if the
product is positive or negative. Unfortunately the implementation
has been incorrect as it has looked at the product returned by the
SMULO to determine the sign of the product. In case of overflow that
product is truncated and won't give us the correct sign bit.
This patch is adding an extra XOR of the multiplication operands,
which is used to determine the sign of the non truncated product.
This patch fixes PR51677.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D108938
We can halve the number of mask constants by masking before shl
and after srl.
This can reduce the number of mov immediate or constant
materializations. Or reduce the number of constant pool loads
for X86 vectors.
I think we might be able to do something similar for bswap. I'll
look at it next.
Differential Revision: https://reviews.llvm.org/D108738
This changes the lowering of saddsat and ssubsat so that instead of
using:
r,o = saddo x, y
c = setcc r < 0
s = c ? INTMAX : INTMIN
ret o ? s : r
into using asr and xor to materialize the INTMAX/INTMIN constants:
r,o = saddo x, y
s = ashr r, BW-1
x = xor s, INTMIN
ret o ? x : r
https://alive2.llvm.org/ce/z/TYufgD
This seems to reduce the instruction count in most testcases across most
architectures. X86 has some custom lowering added to compensate for
cases where it can increase instruction count.
Differential Revision: https://reviews.llvm.org/D105853
This commit adds the isnan intrinsic and provides a default expansion
for it in the SDAG. However, it makes the assumption that types
it operates on are IEEE-compliant types. This is not always the case.
An example of that is PPC "double double" which has a representation
that
- Does not need to conform to IEEE requirements for isnan as it is
not an IEEE-compliant type
- Does not have a representation that allows for straightforward
reinterpreting as an integer and use of integer operations
The result was that this commit broke __builtin_isnan for ppc_fp128
making many valid numeric values report a NaN.
This patch simply changes the expansion to always expand to unordered
comparison (regardless of whether FP exceptions are tracked). This
is inline with previous semantics.
This is recommit of the patch 16ff91ebcc,
reverted in 0c28a7c990 because it had
an error in call of getFastMathFlags (base type should be FPMathOperator
but not Instruction). The original commit message is duplicated below:
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
Clang has builtin function '__builtin_isnan', which implements C
library function 'isnan'. This function now is implemented entirely in
clang codegen, which expands the function into set of IR operations.
There are three mechanisms by which the expansion can be made.
* The most common mechanism is using an unordered comparison made by
instruction 'fcmp uno'. This simple solution is target-independent
and works well in most cases. It however is not suitable if floating
point exceptions are tracked. Corresponding IEEE 754 operation and C
function must never raise FP exception, even if the argument is a
signaling NaN. Compare instructions usually does not have such
property, they raise 'invalid' exception in such case. So this
mechanism is unsuitable when exception behavior is strict. In
particular it could result in unexpected trapping if argument is SNaN.
* Another solution was implemented in https://reviews.llvm.org/D95948.
It is used in the cases when raising FP exceptions by 'isnan' is not
allowed. This solution implements 'isnan' using integer operations.
It solves the problem of exceptions, but offers one solution for all
targets, however some can do the check in more efficient way.
* Solution implemented by https://reviews.llvm.org/D96568 introduced a
hook 'clang::TargetCodeGenInfo::testFPKind', which injects target
specific code into IR. Now only SystemZ implements this hook and it
generates a call to target specific intrinsic function.
Although these mechanisms allow to implement 'isnan' with enough
efficiency, expanding 'isnan' in clang has drawbacks:
* The operation 'isnan' is hidden behind generic integer operations or
target-specific intrinsics. It complicates analysis and can prevent
some optimizations.
* IR can be created by tools other than clang, in this case treatment
of 'isnan' has to be duplicated in that tool.
Another issue with the current implementation of 'isnan' comes from the
use of options '-ffast-math' or '-fno-honor-nans'. If such option is
specified, 'fcmp uno' may be optimized to 'false'. It is valid
optimization in general, but it results in 'isnan' always returning
'false'. For example, in some libc++ implementations the following code
returns 'false':
std::isnan(std::numeric_limits<float>::quiet_NaN())
The options '-ffast-math' and '-fno-honor-nans' imply that FP operation
operands are never NaNs. This assumption however should not be applied
to the functions that check FP number properties, including 'isnan'. If
such function returns expected result instead of actually making
checks, it becomes useless in many cases. The option '-ffast-math' is
often used for performance critical code, as it can speed up execution
by the expense of manual treatment of corner cases. If 'isnan' returns
assumed result, a user cannot use it in the manual treatment of NaNs
and has to invent replacements, like making the check using integer
operations. There is a discussion in https://reviews.llvm.org/D18513#387418,
which also expresses the opinion, that limitations imposed by
'-ffast-math' should be applied only to 'math' functions but not to
'tests'.
To overcome these drawbacks, this change introduces a new IR intrinsic
function 'llvm.isnan', which realizes the check as specified by IEEE-754
and C standards in target-agnostic way. During IR transformations it
does not undergo undesirable optimizations. It reaches instruction
selection, where is lowered in target-dependent way. The lowering can
vary depending on options like '-ffast-math' or '-ffp-model' so the
resulting code satisfies requested semantics.
Differential Revision: https://reviews.llvm.org/D104854
This patch legalizes the Machine Value Type introduced in D94096 for loads
and stores. A new target hook named getAsmOperandValueType() is added which
maps i512 to MVT::i64x8. GlobalISel falls back to DAG for legalization.
Differential Revision: https://reviews.llvm.org/D94097
This patch extends support for (scalable-vector) splats in the
DAGCombiner via the `ISD::matchBinaryPredicate` function, which enable a
variety of simple combines of constants.
Users of this function may now have to distinguish between
`BUILD_VECTOR` and `SPLAT_VECTOR` vector operands. The way of dealing
with this in-tree follows the approach added for
`ISD::matchUnaryPredicate` implemented in D94501.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D106575
I've setup the basic framework for the isGuaranteedNotToBeUndefOrPoison call and updated DAGCombiner::visitFREEZE to use it, further Opcodes can be handled when we have test coverage.
I'm not aware of any vector test freeze coverage so the DemandedElts (and the Depth) args are not being used yet - but they are in place.
SelectionDAG::isGuaranteedNotToBePoison wrappers have also been added.
Differential Revision: https://reviews.llvm.org/D106668
Inserting into a smaller-than-legal scalable vector would result in an
internal compiler error. For example, inserting a <vscale x 4 x i8> into
a <vscale x 8 x i8> (both illegal vector types for SVE) would cause a
crash.
This crash was happening because there was no code to promote (legalise)
the result of an INSERT_SUBVECTOR node.
This patch implements PromoteIntRes_INSERT_SUBVECTOR, which legalises
the ISD node. This is currently done by going through memory. This is
necessary because of the requirement that the SubVec parameter of the
INSERT_SUBVECTOR node must be smaller than the Vec parameter, which
means that INSERT_SUBVECTOR cannot always have a legal result/operand
types.
Co-Authored-by: Joe Ellis <joe.ellis@arm.com>
Differential Revision: https://reviews.llvm.org/D102766
When clamping the index for a memory access to a stacked vector we must
take into account the entire type being accessed, not just assume that
we are accessing only a single element.
Differential Revision: https://reviews.llvm.org/D105016
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
We don't constant fold based on demanded bits elsewhere in
SimplifyDemandedBits, so I don't think we should shrink them either.
The affected ARM test changes because a constant become non-opaque
and eventually enabled some constant folding. This no longer happens.
I checked and InstCombine is able to simplify this test. I'm not sure exactly
what it was trying to test.
Reviewed By: lebedev.ri, dmgreen
Differential Revision: https://reviews.llvm.org/D104832
Iff we have `SCALAR_TO_VECTOR` (and we demand it's only defined 0'th element),
and said scalar was produced by `EXTRACT_VECTOR_ELT` from the 0'th element
of some vector, then we can just continue traversal into said source vector.
This comes up in X86 vector uniform shift lowering.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D104250
Needs to be discussed more.
This reverts commit 255a5c1baa6020c009934b4fa342f9f6dbbcc46
This reverts commit df2056ff3730316f376f29d9986c9913b95ceb1
This reverts commit faff79b7ca144e505da6bc74aa2b2f7cffbbf23
This reverts commit d2a9020785c6e02afebc876aa2778fa64c5cafd
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
This is a reland after an MSan fix in D102667.
Differential Revision: https://reviews.llvm.org/D101713
Ensure we tell getShiftAmountTy that we're working with pre-legalized types to prevent cases where the (legalized) shift type can no longer handle the (non-legalized) type width.
Fixes https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=34366
This extends any frame record created in the function to include that
parameter, passed in X22.
The new record looks like [X22, FP, LR] in memory, and FP is stored with 0b0001
in bits 63:60 (CodeGen assumes they are 0b0000 in normal operation). The effect
of this is that tools walking the stack should expect to see one of three
values there:
* 0b0000 => a normal, non-extended record with just [FP, LR]
* 0b0001 => the extended record [X22, FP, LR]
* 0b1111 => kernel space, and a non-extended record.
All other values are currently reserved.
If compiling for arm64e this context pointer is address-discriminated with the
discriminator 0xc31a and the DB (process-specific) key.
There is also an "i8** @llvm.swift.async.context.addr()" intrinsic providing
front-ends access to this slot (and forcing its creation initialized to nullptr
if necessary).
For opaque pointers, we're trying to avoid uses of
PointerType::getElementType().
A couple of ISel places use PointerType::getElementType(). Some of these
are easy to fix by using ArgListEntry's indirect types.
The inalloca type wasn't stored there, as opposed to preallocated and
byval which have their indirect types available, so add it and use it.
Differential Revision: https://reviews.llvm.org/D101713
Based off a discussion on D89281 - where the AARCH64 implementations were being replaced to use funnel shifts.
Any target that has efficient funnel shift lowering can handle the shift parts expansion using the same expansion, avoiding a lot of duplication.
I've generalized the X86 implementation and moved it to TargetLowering - so far I've found that AARCH64 and AMDGPU benefit, but many other targets (ARM, PowerPC + RISCV in particular) could easily use this with a few minor improvements to their funnel shift lowering (or the folding of their target ops that funnel shifts lower to).
NOTE: I'm trying to avoid adding full SHIFT_PARTS legalizer handling as I think it might actually be possible to remove these opcodes in the medium-term and use funnel shift / libcall expansion directly.
Differential Revision: https://reviews.llvm.org/D101987
Previously we used an i32 constant to store the saturation width, but i32 isn't
legal on RISCV64. This wasn't a big deal to fix, but it is extra work for the
type legalizer.
This patch uses a VTSDNode to store the type similar to SEXT_INREG. This makes
it opaque to the type legalizer.
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D101262
Simon Pilgrim