As for SETCC, use a less expensive condition code when generating
STRICT_FSETCC if the node is known not to have Nan.
Reviewed By: SjoerdMeijer
Differential Revision: https://reviews.llvm.org/D91972
Make sure scalable property is preserved by using getVectorElementCount().
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D95967
emitting retainRV or claimRV calls in the IR
This reapplies 3fe3946d9a without the
changes made to lib/IR/AutoUpgrade.cpp, which was violating layering.
Original commit message:
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
emitting retainRV or claimRV calls in the IR
Background:
This patch makes changes to the front-end and middle-end that are
needed to fix a longstanding problem where llvm breaks ARC's autorelease
optimization (see the link below) by separating calls from the marker
instructions or retainRV/claimRV calls. The backend changes are in
https://reviews.llvm.org/D92569.
https://clang.llvm.org/docs/AutomaticReferenceCounting.html#arc-runtime-objc-autoreleasereturnvalue
What this patch does to fix the problem:
- The front-end adds operand bundle "clang.arc.rv" to calls, which
indicates the call is implicitly followed by a marker instruction and
an implicit retainRV/claimRV call that consumes the call result. In
addition, it emits a call to @llvm.objc.clang.arc.noop.use, which
consumes the call result, to prevent the middle-end passes from changing
the return type of the called function. This is currently done only when
the target is arm64 and the optimization level is higher than -O0.
- ARC optimizer temporarily emits retainRV/claimRV calls after the calls
with the operand bundle in the IR and removes the inserted calls after
processing the function.
- ARC contract pass emits retainRV/claimRV calls after the call with the
operand bundle. It doesn't remove the operand bundle on the call since
the backend needs it to emit the marker instruction. The retainRV and
claimRV calls are emitted late in the pipeline to prevent optimization
passes from transforming the IR in a way that makes it harder for the
ARC middle-end passes to figure out the def-use relationship between
the call and the retainRV/claimRV calls (which is the cause of
PR31925).
- The function inliner removes an autoreleaseRV call in the callee if
nothing in the callee prevents it from being paired up with the
retainRV/claimRV call in the caller. It then inserts a release call if
the call is annotated with claimRV since autoreleaseRV+claimRV is
equivalent to a release. If it cannot find an autoreleaseRV call, it
tries to transfer the operand bundle to a function call in the callee.
This is important since ARC optimizer can remove the autoreleaseRV
returning the callee result, which makes it impossible to pair it up
with the retainRV/claimRV call in the caller. If that fails, it simply
emits a retain call in the IR if the implicit call is a call to
retainRV and does nothing if it's a call to claimRV.
Future work:
- Use the operand bundle on x86-64.
- Fix the auto upgrader to convert call+retainRV/claimRV pairs into
calls annotated with the operand bundles.
rdar://71443534
Differential Revision: https://reviews.llvm.org/D92808
If sext_inreg is supported, we will turn this into sext_inreg. That
will then remove it if there are enough sign bits. But if sext_inreg
isn't supported, we can still remove the shift pair based on sign
bits.
Split from D95890.
The AArch64 DAG combine added by D90945 & D91433 extends the index
of a scalable masked gather or scatter to i32 if necessary.
This patch removes the combine and instead adds shouldExtendGSIndex, which
is used by visitMaskedGather/Scatter in SelectionDAGBuilder to query whether
the index should be extended before calling getMaskedGather/Scatter.
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D94525
To set non-default rounding mode user usually calls function 'fesetround'
from standard C library. This way has some disadvantages.
* It creates unnecessary dependency on libc. On the other hand, setting
rounding mode requires few instructions and could be made by compiler.
Sometimes standard C library even is not available, like in the case of
GPU or AI cores that execute small kernels.
* Compiler could generate more effective code if it knows that a particular
call just sets rounding mode.
This change introduces new IR intrinsic, namely 'llvm.set.rounding', which
sets current rounding mode, similar to 'fesetround'. It however differs
from the latter, because it is a lower level facility:
* 'llvm.set.rounding' does not return any value, whereas 'fesetround'
returns non-zero value in the case of failure. In glibc 'fesetround'
reports failure if its argument is invalid or unsupported or if floating
point operations are unavailable on the hardware. Compiler usually knows
what core it generates code for and it can validate arguments in many
cases.
* Rounding mode is specified in 'fesetround' using constants like
'FE_TONEAREST', which are target dependent. It is inconvenient to work
with such constants at IR level.
C standard provides a target-independent way to specify rounding mode, it
is used in FLT_ROUNDS, however it does not define standard way to set
rounding mode using this encoding.
This change implements only IR intrinsic. Lowering it to machine code is
target-specific and will be implemented latter. Mapping of 'fesetround'
to 'llvm.set.rounding' is also not implemented here.
Differential Revision: https://reviews.llvm.org/D74729
If we're going to end up expanding anyway, we should do it early
so we don't create extra operations to handle the bytes added by
promotion.
This is helfpul on RISCV where we might have to promote i16 all
the way to i64.
Differential Revision: https://reviews.llvm.org/D95756
RISCV has to use 2 shifts for (i64 (zext_inreg X, i32)), but we
can use addiw rd, rs1, x0 for sext_inreg. We already understood this
when type legalizing i32 seteq/ne on rv64. But this transform in
SimplifySetCC would sometimes undo it.
Reviewed By: luismarques
Differential Revision: https://reviews.llvm.org/D95289
This patch adds support for scalable-vector splats in DAGCombiner's
`isConstantOrConstantVector` and `ISD::matchUnaryPredicate` functions,
which enable the SelectionDAG div/rem-by-constant optimizations for
scalable vector types.
It also fixes up one case where the UDIV optimization was generating a
SETCC without first consulting the target for its preferred SETCC result
type.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94501
For now, we correct the result for sqrt if iteration > 0. This doesn't make
sense as they are not strict relative.
Reviewed By: dmgreen, spatel, RKSimon
Differential Revision: https://reviews.llvm.org/D94480
InstrEmitter.h needs TargetMachine but relies on a forward declaration
of TargetMachine in MachineOperand.h. This patch adds a forward
declaration right in InstrEmitter.h.
While we are at it, this patch removes the one in MachineOperand.h,
where it is unnecessary.
Noticed while I was touching other nearby code. I don't have a
test where this matters because the targets I work on
use zero or one boolean contents. And the tests cases I've seen
this fire on happen before type legalization where the result type
is MVT::i1 so the distinction doesn't matter.
There was code to handle the first operand being different than
the result type. And code to handle first operand having the
same type as the type to extend from. This should never happen
for a correctly formed SIGN_EXTEND_INREG. I've replace the
code with asserts.
I also noticed we created the same APInt twice so I've reused it.
Add DemandedElts support inside the TRUNCATE analysis.
REAPPLIED - this was reverted by @hans at rGa51226057fc3 due to an issue with vector shift amount types, which was fixed in rG935bacd3a724 and an additional test case added at rG0ca81b90d19d
Differential Revision: https://reviews.llvm.org/D56387
As noticed on D56387, for vectors we must always correctly adjust the shift amount type during truncation (not just after legalization). We were getting away with it as we currently only accepted scalars via the dyn_cast<ConstantSDNode>.
It caused "Vector shift amounts must be in the same as their first arg"
asserts in Chromium builds. See the code review for repro instructions.
> Add DemandedElts support inside the TRUNCATE analysis.
>
> Differential Revision: https://reviews.llvm.org/D56387
This reverts commit cad4275d69.
This recommits 2c51bef76c.
I've fixed the broken check line from when I renamed the test function.
Original commit message:
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
This builds on D94142 where scalable vectors are allowed in structs.
I did have to fix one scalable vector issue in the vector type
creation for these intrinsics where we used getVectorNumElements
instead of ElementCount.
Differential Revision: https://reviews.llvm.org/D94149
Use the KnownBits icmp comparisons to determine when a ISD::UMIN/UMAX op is unnecessary should either op be known to be ULT/ULE or UGT/UGE than the other.
Differential Revision: https://reviews.llvm.org/D94532
This patch promotes result integer type of FP_TO_XINT in expanding.
So crash in conversion from ppc_fp128 to i1 will be fixed.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D92473
This is a follow-up fix to commit 03c8d6a0c4.
Seems like we now end up with NeedInvert being set in the result
from LegalizeSetCCCondCode more often than in the past, so we
need to handle NeedInvert when expanding BR_CC.
Not sure how to deal with the "Tmp4.getNode()" case properly,
but current assumption is that that code path isn't impacted
by the changes in 03c8d6a0c4 so we can simply move
the old assert into the if-branch and only handle NeedInvert in the
else-branch.
I think that the test case added here, for PowerPC, might have
failed also before commit 03c8d6a0c4. But we started
to hit the assert more often downstream when having merged that
commit.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94762
The ``llvm.experimental.noalias.scope.decl`` intrinsic identifies where a noalias
scope is declared. When the intrinsic is duplicated, a decision must
also be made about the scope: depending on the reason of the duplication,
the scope might need to be duplicated as well.
Reviewed By: nikic, jdoerfert
Differential Revision: https://reviews.llvm.org/D93039
This 'FIXME' popped up in the development of an out-of-tree backend.
Quick fix, but first llvm upstream patch, therefore I do not have commit rights, so if approved please commit?
- Test is not included as this came up in an out-of-tree backend (if required, please hint on how to test this).
Patch by simveg (Simon)
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93219
These methods are recursive so a little costly.
We only look at the result in one place in this function and it's
conditional. We also only need the second call if the first had
enough returned enough sign bits.
MergeInnerShuffle currently attempts to merge shuffle(shuffle(x,y),z) patterns into a single shuffle, using 1 or 2 of the x,y,z ops.
However if we already match 2 ops we might be able to handle the third op if its also a shuffle that references one of the previous ops, allowing us to handle some cases like:
shuffle(shuffle(x,y),shuffle(x,y))
shuffle(shuffle(shuffle(x,z),y),z)
shuffle(shuffle(x,shuffle(x,y)),z)
etc.
This isn't an exhaustive match and is dependent on the order the candidate ops are encountered - if one of the matched ops was a shuffle that was peek-able we don't go back and try to split that, I haven't found much need for that amount of analysis yet.
This is a preliminary patch that will allow us to later improve x86 HADD/HSUB matching - but needs to be reviewed separately as its in generic code and affects existing Thumb2 tests.
Differential Revision: https://reviews.llvm.org/D94671
Even if we know nothing about LHS, it can still be useful to know that
smax(LHS, RHS) >= RHS and smin(LHS, RHS) <= RHS.
Differential Revision: https://reviews.llvm.org/D87145
I'm hoping to reuse MergeInnerShuffle in some other folds - so ensure the candidate ops/mask are reset at the start of each run.
Also, move the second op matching before bailing to make it simpler to try to match other things afterward.
Default value is not changed, so it is NFC actually.
The option allows to use gc values on registers in landing pads.
Reviewers: reames, dantrushin
Reviewed By: reames, dantrushin
Subscribers: llvm-commits
Differential Revision: https://reviews.llvm.org/D94469
This patch resolves the suboptimal codegen described in http://llvm.org/pr47873 .
When CodeGenPrepare lowers select into a conditional branch, a freeze instruction is inserted.
It is then translated to `BRCOND(FREEZE(SETCC))` in SelDag.
The `FREEZE` in the middle of `SETCC` and `BRCOND` was causing a suboptimal code generation however.
This patch adds `BRCOND(FREEZE(cond))` -> `BRCOND(cond)` fold to DAGCombiner to remove the `FREEZE`.
To make this optimization sound, `BRCOND(UNDEF)` simply should nondeterministically jump to the branch or not, rather than raising UB.
It wasn't clear what happens when the condition was undef according to the comments in ISDOpcodes.h, however.
I updated the comments of `BRCOND` to make it explicit (as well as `BR_CC`, which is also a conditional branch instruction).
Note that it diverges from the semantics of `br` instruction in IR, which is explicitly UB.
Since the UB semantics was necessary to explain optimizations that use branching conditions, and SelDag doesn't seem to have such optimization, I think this divergence is okay.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D92015
If SETO/SETUO aren't legal, they'll be expanded and we'll end up
with 3 comparisons.
SETONE is equivalent to (SETOGT || SETOLT)
so if one of those operations is supported use that expansion. We
don't need both since we can commute the operands to make the other.
SETUEQ can be implemented with !(SETOGT || SETOLT) or (SETULE && SETUGE).
I've only implemented the first because it didn't look like most of the
affected targets had legal SETULE/SETUGE.
Reviewed By: frasercrmck, tlively, nemanjai
Differential Revision: https://reviews.llvm.org/D94450
Now that we flush the local value map for every instruction, we don't
need any extra flushes for specific cases. Also, LastFlushPoint is
not used for anything. Follow-ups to #c161665 (D91734).
This reapplies #3fd39d3.
Differential Revision: https://reviews.llvm.org/D92338
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
In addition, constants materialized due to PHI instructions are
not assigned a debug location immediately; instead, when the
local value map is flushed, if the first local value instruction
has no debug location, it is given the same location as the
first non-local-value-map instruction. This prevents PHIs
from introducing unattributed instructions, which would either
be implicitly attributed to the location for the preceding IR
instruction, or given line 0 if they are at the beginning of
a machine basic block. Neither of those consequences is good
for debugging.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
This reapplies commits cf1c774d and dc35368c, and adds the
modification to PHI handling, which should avoid problems
with debugging under gdb.
Differential Revision: https://reviews.llvm.org/D91734
We are checking the unsafe-fp-math for sqrt but not for fpow, which behaves inconsistent.
As the direction is to remove this global option, we need to remove the unsafe-fp-math
check for sqrt and update the test with afn fast-math flags.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D93891
This improves llvm::isConstOrConstSplat by allowing it to analyze
ISD::SPLAT_VECTOR nodes, in order to allow more constant-folding of
operations using scalable vector types.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94168
The TableGen immAllOnesV and immAllZerosV helpers implicitly wrapped the
ISD::isBuildVectorAll(Ones|Zeros) helper functions. This was inhibiting
their use for targets such as RISC-V which use ISD::SPLAT_VECTOR. In
particular, RISC-V had to define its own 'vnot' fragment.
In order to extend the scope of these nodes to include support for
ISD::SPLAT_VECTOR, two new ISD predicate functions have been introduced:
ISD::isConstantSplatVectorAll(Ones|Zeros). These effectively supersede
the older "isBuildVector" predicates, which are now simple wrappers for
the new functions. They pass a defaulted boolean toggle which preserves
the old behaviour. It is hoped that in time all call-sites can be ported
to the "isConstantSplatVector" functions.
While the use of ISD::isBuildVectorAll(Ones|Zeros) has not changed, the
behaviour of the TableGen immAll(Ones|Zeros)V **has**. To test the new
functionality, the custom RISC-V TableGen fragment has been removed and
replaced with the built-in 'vnot'. To test their use as pattern-roots, two
splat patterns have been updated accordingly.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D94223
This implements basic instructions for the new spec.
- Adds new versions of instructions: `catch`, `catch_all`, and `rethrow`
- Adds support for instruction selection for the new instructions
- `catch` needs a custom routine for the same reason `throw` needs one,
to encode `__cpp_exception` tag symbol.
- Updates `WebAssembly::isCatch` utility function to include `catch_all`
and Change code that compares an instruction's opcode with `catch` to
use that function.
- LateEHPrepare
- Previously in LateEHPrepare we added `catch` instruction to both
`catchpad`s (for user catches) and `cleanuppad`s (for destructors).
In the new version `catch` is generated from `llvm.catch` intrinsic
in instruction selection phase, so we only need to add `catch_all`
to the beginning of cleanup pads.
- `catch` is generated from instruction selection, but we need to
hoist the `catch` instruction to the beginning of every EH pad,
because `catch` can be in the middle of the EH pad or even in a
split BB from it after various code transformations.
- Removes `addExceptionExtraction` function, which was used to
generate `br_on_exn` before.
- CFGStackfiy: Deletes `fixUnwindMismatches` function. Running this
function on the new instruction causes crashes, and the new version
will be added in a later CL, whose contents will be completely
different. So deleting the whole function will make the diff easier to
read.
- Reenables all disabled tests in exception.ll and eh-lsda.ll and a
single basic test in cfg-stackify-eh.ll.
- Updates existing tests to use the new assembly format. And deletes
`br_on_exn` instructions from the tests and FileCheck lines.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94040
`wasm_rethrow_in_catch` intrinsic and builtin are used in order to
rethrow an exception when the exception is caught but there is no
matching clause within the current `catch`. For example,
```
try {
foo();
} catch (int n) {
...
}
```
If the caught exception does not correspond to C++ `int` type, it should
be rethrown. These intrinsic/builtin were renamed `rethrow_in_catch`
because at the time I thought there would be another intrinsic for C++'s
`throw` keyword, which rethrows an exception. It turned out that `throw`
keyword doesn't require wasm's `rethrow` instruction, so we rename
`rethrow_in_catch` to just `rethrow` here.
Reviewed By: dschuff, tlively
Differential Revision: https://reviews.llvm.org/D94038
This implements vp_add, vp_and for the VE target by lowering them to the
VVP_* layer. We also add helper functions for VP SDNodes (isVPSDNode,
getVPMaskIdx, getVPExplicitVectorLengthIdx).
Reviewed By: kaz7
Differential Revision: https://reviews.llvm.org/D93766
Attempt to simplify all/any-of style patterns that concatenate 2 smaller integers together into an and(x,y)/or(x,y) + icmp 0/-1 instead.
This is mainly to help some bool predicate reduction patterns where we end up concatenating bool vectors that have been bitcasted to integers.
Differential Revision: https://reviews.llvm.org/D93599
This looks to have been done to save some duplicated code under
two different if statements, but it ends up being harmful to D94073.
This speculative constant can be called on a scalable vector type
with i64 element size when i64 scalars aren't legal. The code tries
and fails to find a vector type with i32 elements that it can use.
So only create the node when we know it will be used.
This patch disables the FSUB(-0,X)->FNEG(X) DAG combine when we're flushing subnormals. It requires updating the existing AMDGPU tests to use the fneg IR instruction, in place of the old fsub(-0,X) canonical form, since AMDGPU is the only backend currently checking the DenormalMode flags.
Note that this will require follow-up optimizations to make sure the FSUB(-0,X) form is handled appropriately
Differential Revision: https://reviews.llvm.org/D93243
Recently a few patches are made to move towards using select i1 instead of and/or i1 to represent "a && b"/"a || b" in C/C++.
"a && b" in C/C++ does not evaluate b if a is false whereas 'and a, b' in IR evaluates b and uses its result regardless of the result of a.
This is problematic because it can cause miscompilation if b was an erroneous operation (https://llvm.org/pr48353).
In C/C++, the result is simply false because b is not evaluated, but in IR the result is poison.
The discussion at D93065 has more context about this.
This patch makes two branch-splitting optimizations (one in SelectionDAGBuilder, one in CodeGenPrepare) recognize
select form of and/or as well using m_LogicalAnd/Or.
Since it is CodeGen, I think this is semantically ok (at least as safe as what codegen already did).
Reviewed By: nikic
Differential Revision: https://reviews.llvm.org/D93853
Fixes a bug introduced by D91589.
When folding `(sext (not i1 x)) -> (add (zext i1 x), -1)`, we try to replace the not first when possible. If we replace the not in-visit, then the now invalidated node will be returned, and subsequently we will return an invalid sext. In cases where the not is replaced in-visit we can simply return SDValue, as the not in the current sext should have already been replaced.
Thanks @jgorbe, for finding the below reproducer.
The following reduced test case crashes clang when built with `clang -O1 -frounding-math`:
```
template <class> class a {
int b() { return c == 0.0 ? 0 : -1; }
int c;
};
template class a<long>;
```
A debug build of clang produces this "assertion failed" error:
```
clang: /home/jgorbe/code/llvm/llvm/lib/CodeGen/SelectionDAG/DAGCombiner.cpp:264: void {anonymous}::DAGCombiner::AddToWorklist(llvm::
SDNode*): Assertion `N->getOpcode() != ISD::DELETED_NODE && "Deleted Node added to Worklist"' failed.
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D93274
When LegalizeType procedure widens a masked_gather, set MemoryType's EltNum equal to Result's EltNum.
As I mentioned in https://reviews.llvm.org/D91092, in previous code, If we have a v17i32's masked_gather in avx512, we widen it to a v32i32's masked_gather with a v17i32's MemoryType. When the SplitVecRes_MGATHER process this v32i32's masked_gather, GetSplitDestVTs will assert fail since what you are going to split is v17i32.
Reviewed By: craig.topper
Differential Revision: https://reviews.llvm.org/D93610
Currently we lower invokes the same way as usual calls, e.g.:
V1 = STATEPOINT ... V (tied-def 0)
But this is incorrect is V1 is used on exceptional path.
By LLVM rules V1 neither dominates its uses in landing pad, nor
its live range is live on entry to landing pad. So compiler is
allowed to do various weird transformations like splitting live
range after statepoint and use split LR in catch block.
Until (and if) we find better solution to this problem, let's
use old lowering (spilling) for those values which are used on
exceptional path and allow VReg lowering for values used only
on normal path.
Differential Revision: https://reviews.llvm.org/D93449
This patch adds support for the fptoui.sat and fptosi.sat intrinsics,
which provide basically the same functionality as the existing fptoui
and fptosi instructions, but will saturate (or return 0 for NaN) on
values unrepresentable in the target type, instead of returning
poison. Related mailing list discussion can be found at:
https://groups.google.com/d/msg/llvm-dev/cgDFaBmCnDQ/CZAIMj4IBAAJ
The intrinsics have overloaded source and result type and support
vector operands:
i32 @llvm.fptoui.sat.i32.f32(float %f)
i100 @llvm.fptoui.sat.i100.f64(double %f)
<4 x i32> @llvm.fptoui.sat.v4i32.v4f16(half %f)
// etc
On the SelectionDAG layer two new ISD opcodes are added,
FP_TO_UINT_SAT and FP_TO_SINT_SAT. These opcodes have two operands
and one result. The second operand is an integer constant specifying
the scalar saturation width. The idea here is that initially the
second operand and the scalar width of the result type are the same,
but they may change during type legalization. For example:
i19 @llvm.fptsi.sat.i19.f32(float %f)
// builds
i19 fp_to_sint_sat f, 19
// type legalizes (through integer result promotion)
i32 fp_to_sint_sat f, 19
I went for this approach, because saturated conversion does not
compose well. There is no good way of "adjusting" a saturating
conversion to i32 into one to i19 short of saturating twice.
Specifying the saturation width separately allows directly saturating
to the correct width.
There are two baseline expansions for the fp_to_xint_sat opcodes. If
the integer bounds can be exactly represented in the float type and
fminnum/fmaxnum are legal, we can expand to something like:
f = fmaxnum f, FP(MIN)
f = fminnum f, FP(MAX)
i = fptoxi f
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
If the bounds cannot be exactly represented, we expand to something
like this instead:
i = fptoxi f
i = select f ult FP(MIN), MIN, i
i = select f ogt FP(MAX), MAX, i
i = select f uo f, 0, i # unnecessary if unsigned as 0 = MIN
It should be noted that this expansion assumes a non-trapping fptoxi.
Initial tests are for AArch64, x86_64 and ARM. This exercises all of
the scalar and vector legalization. ARM is included to test float
softening.
Original patch by @nikic and @ebevhan (based on D54696).
Differential Revision: https://reviews.llvm.org/D54749
Clean up a TODO, to support folding a shift of a constant by a
select of constants, on targets with different shift operand sizes.
Reviewed By: RKSimon, lebedev.ri
Differential Revision: https://reviews.llvm.org/D90349
Subvector broadcasts are only load instructions, yet X86ISD::SUBV_BROADCAST treats them more generally, requiring a lot of fallback tablegen patterns.
This initial patch replaces constant vector lowering inside lowerBuildVectorAsBroadcast with direct X86ISD::SUBV_BROADCAST_LOAD loads which helps us merge a number of equivalent loads/broadcasts.
As well as general plumbing/analysis additions for SUBV_BROADCAST_LOAD, I needed to wrap SelectionDAG::makeEquivalentMemoryOrdering so it can handle result chains from non generic LoadSDNode nodes.
Later patches will continue to replace X86ISD::SUBV_BROADCAST usage.
Differential Revision: https://reviews.llvm.org/D92645
X86 and AArch64 expand it as libcall inside the target. And PowerPC also
want to expand them as libcall for P8. So, propose an implement in the
legalizer to common the logic and remove the code for X86/AArch64 to
avoid the duplicate code.
Reviewed By: Craig Topper
Differential Revision: https://reviews.llvm.org/D91331
Currently the backend special cases x86_intrcc and treats the first
parameter as byval. Make the IR require byval for this parameter to
remove this special case, and avoid the dependence on the pointee
element type.
Fixes bug 46672.
I'm not sure the IR is enforcing all the calling convention
constraints. clang seems to ignore the attribute for empty parameter
lists, but the IR tolerates it.
Changes in this patch:
- Minor changes to the LowerVECREDUCE_SEQ_FADD function added by @cameron.mcinally
to also work for scalable types
- Added TableGen patterns for FP reductions with unpacked types (nxv2f16, nxv4f16 & nxv2f32)
- Asserts added to expandFMINNUM_FMAXNUM & expandVecReduceSeq for scalable types
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D93050
This function is needed for when it is necessary to split the subvector
operand of an llvm.experimental.vector.insert call. Splitting the
subvector operand means performing two insertions: one inserting the
lower part of the split subvector into the destination vector, and
another for inserting the upper part.
Through experimenting, it seems quite rare to need split the subvector
operand, but this is necessary to avoid assertion errors.
Differential Revision: https://reviews.llvm.org/D92760
If SETUNE isn't legal, UO can use the NOT of the SETO expansion.
Removes some complex isel patterns. Most of the test changes are
from using XORI instead of SEQZ.
Differential Revision: https://reviews.llvm.org/D92008
This method previously always recursively checked both the left-hand
side and right-hand side of binary operations for splatted (broadcast)
vector values to determine if the parent DAG node is a splat.
Like several other SelectionDAG methods, limit the recursion depth to
MaxRecursionDepth (6). This prevents stack overflow.
See also https://issuetracker.google.com/173785481
Patch by Nicolas Capens. Thanks!
Differential Revision: https://reviews.llvm.org/D92421
This patch adds the following DAGCombines, which apply if isVectorLoadExtDesirable() returns true:
- fold (and (masked_gather x)) -> (zext_masked_gather x)
- fold (sext_inreg (masked_gather x)) -> (sext_masked_gather x)
LowerMGATHER has also been updated to fetch the LoadExtType associated with the
gather and also use this value to determine the correct masked gather opcode to use.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92230
Adds the ExtensionType flag, which reflects the LoadExtType of a MaskedGatherSDNode.
Also updated SelectionDAGDumper::print_details so that details of the gather
load (is signed, is scaled & extension type) are printed.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91084
This commit adds two new intrinsics.
- llvm.experimental.vector.insert: used to insert a vector into another
vector starting at a given index.
- llvm.experimental.vector.extract: used to extract a subvector from a
larger vector starting from a given index.
The codegen work for these intrinsics has already been completed; this
commit is simply exposing the existing ISD nodes to LLVM IR.
Reviewed By: cameron.mcinally
Differential Revision: https://reviews.llvm.org/D91362
LLVM intrinsic llvm.maxnum|minnum is overloaded intrinsic, can be used on any
floating-point or vector of floating-point type.
This patch extends current infrastructure to support scalable vector type.
This patch also fix a warning message of incorrect use of EVT::getVectorNumElements()
for scalable type, when DAGCombiner trying to split scalable vector.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92607
Sometimes people get minimal crash reports after a UBSAN incident. This change
tags each trap with an integer representing the kind of failure encountered,
which can aid in tracking down the root cause of the problem.
The refineIndexType & refineUniformBase functions added by D90942 can also be used to
improve CodeGen of masked gathers.
These changes were split out from D91092
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D92319
Lowers the llvm.masked.gather intrinsics (scalar plus vector addressing mode only)
Changes in this patch:
- Add custom lowering for MGATHER, using getGatherVecOpcode() to choose the appropriate
gather load opcode to use.
- Improve codegen with refineIndexType/refineUniformBase, added in D90942
- Tests added for gather loads with 32 & 64-bit scaled & unscaled offsets.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91092
In previous code, when refineIndexType(...) is called and Index is undef, Index.getOperand(0) will raise a assertion fail.
Reviewed By: pengfei
Differential Revision: https://reviews.llvm.org/D92548
Move fold of (sext (not i1 x)) -> (add (zext i1 x), -1) from X86 to DAGCombiner to improve codegen on other targets.
Differential Revision: https://reviews.llvm.org/D91589
1. Removed #include "...AliasAnalysis.h" in other headers and modules.
2. Cleaned up includes in AliasAnalysis.h.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D92489
An indirect call site needs to be probed for its potential call targets. With CSSPGO a direct call also needs a probe so that a calling context can be represented by a stack of callsite probes. Unlike pseudo probes for basic blocks that are in form of standalone intrinsic call instructions, pseudo probes for callsites have to be attached to the call instruction, thus a separate instruction would not work.
One possible way of attaching a probe to a call instruction is to use a special metadata that carries information about the probe. The special metadata will have to make its way through the optimization pipeline down to object emission. This requires additional efforts to maintain the metadata in various places. Given that the `!dbg` metadata is a first-class metadata and has all essential support in place , leveraging the `!dbg` metadata as a channel to encode pseudo probe information is probably the easiest solution.
With the requirement of not inflating `!dbg` metadata that is allocated for almost every instruction, we found that the 32-bit DWARF discriminator field which mainly serves AutoFDO can be reused for pseudo probes. DWARF discriminators distinguish identical source locations between instructions and with pseudo probes such support is not required. In this change we are using the discriminator field to encode the ID and type of a callsite probe and the encoded value will be unpacked and consumed right before object emission. When a callsite is inlined, the callsite discriminator field will go with the inlined instructions. The `!dbg` metadata of an inlined instruction is in form of a scope stack. The top of the stack is the instruction's original `!dbg` metadata and the bottom of the stack is for the original callsite of the top-level inliner. Except for the top of the stack, all other elements of the stack actually refer to the nested inlined callsites whose discriminator field (which actually represents a calliste probe) can be used together to represent the inline context of an inlined PseudoProbeInst or CallInst.
To avoid collision with the baseline AutoFDO in various places that handles dwarf discriminators where a check against the `-pseudo-probe-for-profiling` switch is not available, a special encoding scheme is used to tell apart a pseudo probe discriminator from a regular discriminator. For the regular discriminator, if all lowest 3 bits are non-zero, it means the discriminator is basically empty and all higher 29 bits can be reversed for pseudo probe use.
Callsite pseudo probes are inserted in `SampleProfileProbePass` and a target-independent MIR pass `PseudoProbeInserter` is added to unpack the probe ID/type from `!dbg`.
Note that with this work the switch -debug-info-for-profiling will not work with -pseudo-probe-for-profiling anymore. They cannot be used at the same time.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D91756
This reverts commit cf1c774d6a.
This change caused several regressions in the gdb test suite - at least
a sample of which was due to line zero instructions making breakpoints
un-lined. I think they're worth investigating/understanding more (&
possibly addressing) before moving forward with this change.
Revert "[FastISel] NFC: Clean up unnecessary bookkeeping"
This reverts commit 3fd39d3694.
Revert "[FastISel] NFC: Remove obsolete -fast-isel-sink-local-values option"
This reverts commit a474657e30.
Revert "Remove static function unused after cf1c774."
This reverts commit dc35368ccf.
Revert "[lldb] Fix TestThreadStepOut.py after "Flush local value map on every instruction""
This reverts commit 53a14a47ee.
Move the X86 VSELECT->UADDSAT fold to DAGCombiner - there's nothing target specific about these folds.
The SSE42 test diffs are relatively benign - its avoiding an extra constant load in exchange for an extra xor operation - there are extra register moves, which is annoying as all those operations should commute them away.
Differential Revision: https://reviews.llvm.org/D91876
Now that we flush the local value map for every instruction, we don't
need any extra flushes for specific cases. Also, LastFlushPoint is
not used for anything. Follow-ups to #dc35368 (D91734).
Differential Revision: https://reviews.llvm.org/D92338
The mapping between registers and relative size has been updated to
use TypeSize to account for the size of scalable EVTs.
The patch is a NFCI, if not for the fact that with this change the
function `getUnderlyingArgRegs` does not raise a warning for implicit
conversion of `TypeSize` to `unsigned` when generating machine code
from the test added to the patch.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D92096
If Sext is cheaper than Zext for a target, we can use that to promote the operands of UMIN/UMAX. Using sext just makes numbers with the sign bit set even larger when treated as an unsigned number and it has no effect on number without the sign bit set. So the relative order doesn't change. This is similar to what we already do for promoting SETCC.
This is helpful on RISCV where i32 arguments are sign extended on RV64 and many instructions are able to produce results with 33 sign bits.
Differential Revision: https://reviews.llvm.org/D92128
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
Differential Revision: https://reviews.llvm.org/D92183
For now, we will hardcode the result as 0.0 if the input is denormal or 0. That will
have the impact the precision. As the fsqrt added belong to the cold path of the
cmp+branch, it won't impact the performance for normal inputs for PowerPC, but improve
the precision if the input is denormal.
Reviewed By: Spatel
Differential Revision: https://reviews.llvm.org/D80974
Currently, we have some confusion in the codebase regarding the
meaning of LocationSize::unknown(): Some parts (including most of
BasicAA) assume that LocationSize::unknown() only allows accesses
after the base pointer. Some parts (various callers of AA) assume
that LocationSize::unknown() allows accesses both before and after
the base pointer (but within the underlying object).
This patch splits up LocationSize::unknown() into
LocationSize::afterPointer() and LocationSize::beforeOrAfterPointer()
to make this completely unambiguous. I tried my best to determine
which one is appropriate for all the existing uses.
The test changes in cs-cs.ll in particular illustrate a previously
clearly incorrect AA result: We were effectively assuming that
argmemonly functions were only allowed to access their arguments
after the passed pointer, but not before it. I'm pretty sure that
this was not intentional, and it's certainly not specified by
LangRef that way.
Differential Revision: https://reviews.llvm.org/D91649
If usubsat() is legal, this is likely to result in smaller codegen expansion than the default cmp+select codegen expansion.
Allows us to move the x86-specific lowering to the generic expansion code.
Updated the affected scalable_of_scalable tests in sve-gep.ll, as isConstantSplatValue now returns true in DAGCombiner::visitMUL and folds `(mul x, 1) -> x`
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D91363
We currently don't match this which limits the effectiveness of D91120 until
InstCombine starts canonicalizing to llvm.abs. This should be easy to remove
if/when we remove the SPF_ABS handling.
Differential Revision: https://reviews.llvm.org/D92118
Local values are constants or addresses that can't be folded into
the instruction that uses them. FastISel materializes these in a
"local value" area that always dominates the current insertion
point, to try to avoid materializing these values more than once
(per block).
https://reviews.llvm.org/D43093 added code to sink these local
value instructions to their first use, which has two beneficial
effects. One, it is likely to avoid some unnecessary spills and
reloads; two, it allows us to attach the debug location of the
user to the local value instruction. The latter effect can
improve the debugging experience for debuggers with a "set next
statement" feature, such as the Visual Studio debugger and PS4
debugger, because instructions to set up constants for a given
statement will be associated with the appropriate source line.
There are also some constants (primarily addresses) that could be
produced by no-op casts or GEP instructions; the main difference
from "local value" instructions is that these are values from
separate IR instructions, and therefore could have multiple users
across multiple basic blocks. D43093 avoided sinking these, even
though they were emitted to the same "local value" area as the
other instructions. The patch comment for D43093 states:
Local values may also be used by no-op casts, which adds the
register to the RegFixups table. Without reversing the RegFixups
map direction, we don't have enough information to sink these
instructions.
This patch undoes most of D43093, and instead flushes the local
value map after(*) every IR instruction, using that instruction's
debug location. This avoids sometimes incorrect locations used
previously, and emits instructions in a more natural order.
This does mean materialized values are not re-used across IR
instruction boundaries; however, only about 5% of those values
were reused in an experimental self-build of clang.
(*) Actually, just prior to the next instruction. It seems like
it would be cleaner the other way, but I was having trouble
getting that to work.
Differential Revision: https://reviews.llvm.org/D91734
If smax() is legal, this is likely to result in smaller codegen expansion for abs(x) than the xor(add,ashr) method.
This is also what PowerPC has been doing for its abs implementation, so it lets us get rid of a load of custom lowering code there (and which was never updated when they added smax lowering).
Alive2: https://alive2.llvm.org/ce/z/xRk3cD
Differential Revision: https://reviews.llvm.org/D92095
PowerPC has instruction ftsqrt/xstsqrtdp etc to do the input test for software square root.
LLVM now tests it with smallest normalized value using abs + setcc. We should add hook to
target that has test instructions.
Reviewed By: Spatel, Chen Zheng, Qiu Chao Fang
Differential Revision: https://reviews.llvm.org/D80706
`SimplifySetCC` invokes `getNodeIfExists` without passing `Flags` argument and `getNodeIfExists` uses a default `SDNodeFlags` to intersect the original flags, as a consequence, flags like `nsw` is dropped. Added a new helper function `doesNodeExist` to check if a node exists without modifying its flags.
Reviewed By: #powerpc, nemanjai
Differential Revision: https://reviews.llvm.org/D89938
If the size of memory access is unknown, do not use it to analysis. One
example of unknown size memory access is to load/store scalable vector
objects on the stack.
Differential Revision: https://reviews.llvm.org/D91833
This is part of the discussion on D91876 about trying to reduce custom lowering of MIN/MAX ops on older SSE targets - if we can improve generic vector expansion we should be able to relax the limitations in SelectionDAGBuilder when it will let MIN/MAX ops be generated, and avoid having to flag so many ops as 'custom'.
ExpandStrictFPOp started taking two parameters instead of one on Jan
10, 2020 in commit f678fc7660, but the
declaration for the single-perameter version has remained since.
This change introduces a MIR target-independent pseudo instruction corresponding to the IR intrinsic llvm.pseudoprobe for pseudo-probe block instrumentation. Please refer to https://reviews.llvm.org/D86193 for the whole story.
An `llvm.pseudoprobe` intrinsic call will be lowered into a target-independent operation named `PSEUDO_PROBE`. Given the following instrumented IR,
```
define internal void @foo2(i32 %x, void (i32)* %f) !dbg !4 {
bb0:
%cmp = icmp eq i32 %x, 0
call void @llvm.pseudoprobe(i64 837061429793323041, i64 1)
br i1 %cmp, label %bb1, label %bb2
bb1:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 2)
br label %bb3
bb2:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 3)
br label %bb3
bb3:
call void @llvm.pseudoprobe(i64 837061429793323041, i64 4)
ret void
}
```
the corresponding MIR is shown below. Note that block `bb3` is duplicated into `bb1` and `bb2` where its probe is duplicated too. This allows for an accurate execution count to be collected for `bb3`, which is basically the sum of the counts of `bb1` and `bb2`.
```
bb.0.bb0:
frame-setup PUSH64r undef $rax, implicit-def $rsp, implicit $rsp
TEST32rr killed renamable $edi, renamable $edi, implicit-def $eflags
PSEUDO_PROBE 837061429793323041, 1, 0
$edi = MOV32ri 1, debug-location !13; test.c:0
JCC_1 %bb.1, 4, implicit $eflags
bb.2.bb2:
PSEUDO_PROBE 837061429793323041, 3, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
bb.1.bb1:
PSEUDO_PROBE 837061429793323041, 2, 0
PSEUDO_PROBE 837061429793323041, 4, 0
$rax = frame-destroy POP64r implicit-def $rsp, implicit $rsp
RETQ
```
The target op PSEUDO_PROBE will be converted into a piece of binary data by the object emitter with no machine instructions generated. This is done in a different patch.
Reviewed By: wmi
Differential Revision: https://reviews.llvm.org/D86495
The default version only works if the returned node has a single
result. The X86 and PowerPC versions support multiple results
and allow a single result to be returned from a node with
multiple outputs. And allow a single result that is not result 0
of the node.
Also replace the Mips version since the new version should work
for it. The original version handled multiple results, but only
if the new node and original node had the same number of results.
Differential Revision: https://reviews.llvm.org/D91846
This patch implements out of line atomics for LSE deployment
mechanism. Details how it works can be found in llvm/docs/Atomics.rst
Options -moutline-atomics and -mno-outline-atomics to enable and disable it
were added to clang driver. This is clang and llvm part of out-of-line atomics
interface, library part is already supported by libgcc. Compiler-rt
support is provided in separate patch.
Differential Revision: https://reviews.llvm.org/D91157
When constructing a MemoryLocation by hand, require that a
LocationSize is explicitly specified. D91649 will split up
LocationSize::unknown() into two different states, and callers
should make an explicit choice regarding the kind of MemoryLocation
they want to have.
The `dso_local_equivalent` constant is a wrapper for functions that represents a
value which is functionally equivalent to the global passed to this. That is, if
this accepts a function, calling this constant should have the same effects as
calling the function directly. This could be a direct reference to the function,
the `@plt` modifier on X86/AArch64, a thunk, or anything that's equivalent to the
resolved function as a call target.
When lowered, the returned address must have a constant offset at link time from
some other symbol defined within the same binary. The address of this value is
also insignificant. The name is leveraged from `dso_local` where use of a function
or variable is resolved to a symbol in the same linkage unit.
In this patch:
- Addition of `dso_local_equivalent` and handling it
- Update Constant::needsRelocation() to strip constant inbound GEPs and take
advantage of `dso_local_equivalent` for relative references
This is useful for the [Relative VTables C++ ABI](https://reviews.llvm.org/D72959)
which makes vtables readonly. This works by replacing the dynamic relocations for
function pointers in them with static relocations that represent the offset between
the vtable and virtual functions. If a function is externally defined,
`dso_local_equivalent` can be used as a generic wrapper for the function to still
allow for this static offset calculation to be done.
See [RFC](http://lists.llvm.org/pipermail/llvm-dev/2020-August/144469.html) for more details.
Differential Revision: https://reviews.llvm.org/D77248
In some cases, the values passed to `asm sideeffect` calls cannot be
mapped directly to simple MVTs. Currently, we crash in the backend if
that happens. An example can be found in the @test_vector_too_large_r_m
test case, where we pass <9 x float> vectors. In practice, this can
happen in cases like the simple C example below.
using vec = float __attribute__((ext_vector_type(9)));
void f1 (vec m) {
asm volatile("" : "+r,m"(m) : : "memory");
}
One case that use "+r,m" constraints for arbitrary data types in
practice is google-benchmark's DoNotOptimize.
This patch updates visitInlineAsm so that it use MVT::Other for
constraints with complex VTs. It looks like the rest of the backend
correctly deals with that and properly legalizes the type.
And we still report an error if there are no registers to satisfy the
constraint.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D91710
If the scatter store is able to perform the sign/zero extend of
its index, this is folded into the instruction with refineIndexType().
Additionally, refineUniformBase() will return the base pointer and index
from an add + splat_vector.
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90942
No longer rely on an external tool to build the llvm component layout.
Instead, leverage the existing `add_llvm_componentlibrary` cmake function and
introduce `add_llvm_component_group` to accurately describe component behavior.
These function store extra properties in the created targets. These properties
are processed once all components are defined to resolve library dependencies
and produce the header expected by llvm-config.
Differential Revision: https://reviews.llvm.org/D90848
We have a frequent pattern where we're merging two KnownBits to get the common/shared bits, and I just fell for the gotcha where I tried to use the & operator to merge them........
Lowers the llvm.masked.scatter intrinsics (scalar plus vector addressing mode only)
Changes included in this patch:
- Custom lowering for MSCATTER, which chooses the appropriate scatter store opcode to use.
Floating-point scatters are cast to integer, with patterns added to match FP reinterpret_casts.
- Added the getCanonicalIndexType function to convert redundant addressing
modes (e.g. scaling is redundant when accessing bytes)
- Tests with 32 & 64-bit scaled & unscaled offsets
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90941
This patch adds the IsTruncatingStore flag to MaskedScatterSDNode, set by getMaskedScatter().
Updated SelectionDAGDumper::print_details for MaskedScatterSDNode to print
the details of masked scatters (is truncating, signed or scaled).
This is the first in a series of patches which adds support for scalable masked scatters
Reviewed By: sdesmalen
Differential Revision: https://reviews.llvm.org/D90939
Add a TLI hook to allow SelectionDAG to fine tune the conversion of CTPOP to a chain of "x & (x - 1)" when CTPOP isn't legal.
A subsequent patch will attempt to fine tune the X86 code gen.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89952
FastISel generates instructions to materialize "local values" at the
top of a block, in the hope that these values could be reused within
the block. To reduce spills and restores, FastISel treats calls as
sub-block boundaries, flushing the "local value map" at each call.
This patch treats the mem* intrinsics as if they were calls, because
at O0 generally they are calls. Eliminating these spills/restores is
actually better for debugging (especially a "continue at this line"
command), code size, stack frame size, and maybe even performance.
Differential Revision: https://reviews.llvm.org/D90877
Fold
VT = (and (sign_extend NarrowVT to VT) #bitmask)
into
VT = (zero_extend NarrowVT)
With this combine, the test replaces a sign extended load + an
unsigned extention with a zero extended load to render one of the
operands of the last multiplication.
BEFORE | AFTER
f_i16_i32: | f_i16_i32:
.fnstart | .fnstart
ldrsh r0, [r0] | ldrh r1, [r1]
ldrsh r1, [r1] | ldrsh r0, [r0]
smulbb r0, r1, r0 | smulbb r0, r0, r1
uxth r1, r1 | mul r0, r0, r1
mul r0, r0, r1 | bx lr
bx lr |
Reviewed By: resistor
Differential Revision: https://reviews.llvm.org/D90605
The if was checking !Res.getNode() but that's always true since
Res was initialized to SDValue() and not touched before the if.
This appears to be a leftover from a previous implementation of
Custom legalization where Res was updated instead of returning
immediately.
Hook up legalizations for VECREDUCE_SEQ_FMUL. This is following up on the VECREDUCE_SEQ_FADD work from D90247.
Differential Revision: https://reviews.llvm.org/D90644
Summary:
For vector element types which are not byte-sized, we would generate
incorrect scalar offsets and produce incorrect codegen.
This optimization could potentially be supported in the future, e.g. by
loading in bytes, then shifting and masking out the remaining bits of
the vector element. However, without an upstream target to test against
it's best to avoid the bad codegen in the simplest possible way.
Related to this bug:
https://bugs.llvm.org/show_bug.cgi?id=27600
Reviewed by: foad
Differential Revision: https://reviews.llvm.org/D78568
This patch uses the existing LowerFixedLengthReductionToSVE function to also lower
scalable vector reductions. A separate function has been added to lower VECREDUCE_AND
& VECREDUCE_OR operations with predicate types using ptest.
Lowering scalable floating-point reductions will be addressed in a follow up patch,
for now these will hit the assertion added to expandVecReduce() in TargetLowering.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D89382
As discussed on D90527, we should be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
As discussed on D90527, we should be be trying to move shift handling functionality into KnownBits to avoid code duplication in SelectionDAG/GlobalISel/ValueTracking.
The refactor to use the KnownBits fixed/min/max constant helpers allows us to hit a couple of cases that we were missing before.
We still need the getValidMinimumShiftAmountConstant case as KnownBits doesn't handle per-element vector cases.
Unsigned 32-bit or shorter integer to ppcf128 conversion are currently
expanded as signed-to-double with an extra fadd to 'complement'. But on
PowerPC we have native instruction to directly convert unsigned to
double since ISA v2.06. This patch exploits it.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89786
Add Legalization support for VECREDUCE_SEQ_FADD, so that we don't need to depend on ExpandReductionsPass.
Differential Revision: https://reviews.llvm.org/D90247
For i1 types, boolean false is represented identically regardless of
the boolean content, so we can allow optimizations that otherwise
would not be correct for booleans with false represented as a negative
one.
Patch by Erik Hogeman.
Differential Revision: https://reviews.llvm.org/D90145
The modified code in visitSTORE was missing a scalable vector check, and still
using the now deprecated implicit cast of TypeSize to uint64_t through the
overloaded operator. This patch fixes these issues.
This brings the logic in line with the comment on the context line immediately
above the added precondition.
Add a test in sve-redundant-store.ll that the warning is not triggered.
Differential Revision: https://reviews.llvm.org/D89701
The modified code in visitSTORE was missing a scalable vector check, and still
using the now deprecated implicit cast of TypeSize to uint64_t through the
overloaded operator. This patch fixes these issues.
This brings the logic in line with the comment on the context line immediately
above the added precondition.
Add a test in Redundantstores.ll that the warning is not triggered.
Replace the X86 specific isSplatZeroExtended helper with a generic BuildVectorSDNode method.
I've just used this to simplify the X86ISD::BROADCASTM lowering so far (and remove isSplatZeroExtended), but we should be able to use this in more places to lower to complex broadcast patterns.
Differential Revision: https://reviews.llvm.org/D87930
Some of our conversion algorithms produce -0.0 when converting unsigned i64 to double when the rounding mode is round toward negative. This switches them to other algorithms that don't have this problem. Since it is undefined behavior to change rounding mode with the non-strict nodes, this patch only changes the behavior for strict nodes.
There are still problems with unsigned i32 conversions too which I'll try to fix in another patch.
Fixes part of PR47393
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87115
Updates an optimization that relies on boolean contents being either 0
or 1 to properly check for this before triggering.
The following:
(X & 8) != 0 --> (X & 8) >> 3
Produces unexpected results when a boolean 'true' value is represented
by negative one.
Patch by Erik Hogeman.
Differential Revision: https://reviews.llvm.org/D89390
We were previously relying upon the TypeSize comparison operators to
obtain the maximum size of two types, however use of such operators is
being deprecated in favour of making the caller aware that it could
be dealing with scalable vector types. I have changed the code to assert
that the two types have the same scalable property and thus we can
simply take the maximum of the known minimum sizes instead.
Differential Revision: https://reviews.llvm.org/D88563
From LangRef, FMF contract should not enable reassociating to form
arbitrary contractions. So it should not help rearrange nodes like
(fma (fmul x, c1), c2, y) into (fma x, c1*c2, y).
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89527
This enables these transforms for vectors:
(ctpop x) u< 2 -> (x & x-1) == 0
(ctpop x) u> 1 -> (x & x-1) != 0
(ctpop x) == 1 --> (x != 0) && ((x & x-1) == 0)
(ctpop x) != 1 --> (x == 0) || ((x & x-1) != 0)
All enabled if CTPOP isn't Legal. This differs from the scalar
behavior where the first two are done unconditionally and the
last two are done if CTPOP isn't Legal or Custom. The Legal
check produced better results for vectors based on X86's
custom handling. Might be worth re-visiting scalars here.
I disabled the looking through truncate for vectors. The
code that creates new setcc can use the same result VT as the
original setcc even if we truncated the input. That may work
work for most scalars, but definitely wouldn't work for vectors
unless it was a vector of i1.
Fixes or at least improves PR47825
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89346
MULH is often expanded on targets.
This patch removes the isMulhCheaperThanMulShift hook and uses
isOperationLegalOrCustom instead.
Differential Revision: https://reviews.llvm.org/D80485
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. This patch changes a few
functions that were always expecting to work on scalar or fixed width
types:
1. DAGCombiner::mergeTruncStores - deals with scalar integers only.
2. DAGCombiner::ReduceLoadWidth - not valid for vectors.
3. DAGCombiner::createBuildVecShuffle - should only be used for
fixed width vectors.
4. SelectionDAGLegalize::ExpandFCOPYSIGN and
SelectionDAGLegalize::getSignAsIntValue - only work on scalars.
Differential Revision: https://reviews.llvm.org/D88562
In certain places in llvm/lib/CodeGen we were relying upon the TypeSize
comparison operators when in fact the code was only ever expecting
either scalar values or fixed width vectors. I've changed some of these
places to use the equivalent scalar operator.
Differential Revision: https://reviews.llvm.org/D88482
In certain places in the code we can never end up in a situation where
we're mixing fixed width and scalable vector types. For example,
we can't have truncations and extends that change the lane count. Also,
in other places such as GenWidenVectorStores and GenWidenVectorLoads we
know from the behaviour of FindMemType that we can never choose a vector
type with a different scalable property.
In various places I have used EVT::bitsXY functions instead of
TypeSize::isKnownXY, where it probably makes sense to keep an assert
that scalable properties match.
Differential Revision: https://reviews.llvm.org/D88654
As requested in D89346. This allows us to add some early outs.
I reordered some checks a little bit to make the more common bail outs happen earlier. Like checking opcode before checking hasOneUse. And I moved the bit width check to make sure it was safe to look through a truncate to the spot where we look through truncates instead of after.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D89494
This combine can look through (trunc (ctpop X)). When doing this
it tries to make sure the trunc doesn't lose any information
from the ctpop. It does this by checking that the truncated type
has more bits that Log2_32_Ceil of the ctpop type. The Ceil is
unnecessary and pessimizes non-power of 2 types.
For example, ctpop of i256 requires 9 bits to represent the max
value of 256. But ctpop of i255 only requires 8 bits to represent
the max result of 255. Log2_32_Ceil of 256 and 255 both return 8
while Log2_32 returns 8 for 256 and 7 for 255
The code with popcnt enabled is a regression for this test case,
but it does match what already happens with i256 truncated to i9.
Since power of 2 is more likely, I don't think it should block
this change.
Differential Revision: https://reviews.llvm.org/D89412
When given the -experimental-debug-variable-locations option (via -Xclang
or to llc), have SelectionDAG generate DBG_INSTR_REF instructions instead
of DBG_VALUE. For now, this only happens in a limited circumstance: when
the value referred to is not a PHI and is defined in the current block.
Other situations introduce interesting problems, addresed in later patches.
Practically, this patch hooks into InstrEmitter and if it can find a
defining instruction for a value, gives it an instruction number, and
points the DBG_INSTR_REF at that <instr, operand> pair.
Differential Revision: https://reviews.llvm.org/D85747
This passes existing X86 test but I'm not sure if it handles all type
legalization cases it needs to.
Alternative to D89200
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D89222
Based on a discussion on D88783, if we're promoting a funnel shift to a width at least twice the size as the original type, then we can use the 'double shift' patterns (shifting the concatenated sources).
Differential Revision: https://reviews.llvm.org/D89139
I have introduced a new template PolySize class, where the template
parameter determines the type of quantity, i.e. for an element
count this is just an unsigned value. The ElementCount class is
now just a simple derivation of PolySize<unsigned>, whereas TypeSize
is more complicated because it still needs to contain the uint64_t
cast operator, since there are still many places in the code that
rely upon this implicit cast. As such the class also still needs
some of it's own operators.
I've tried to minimise the amount of code in the base PolySize
class, which led to a couple of changes:
1. In some places we were relying on '==' operator comparisons
between ElementCounts and the scalar value 1. I didn't put this
operator in the new PolySize class, and thought it was actually
clearer to use the isScalar() function instead.
2. I removed the isByteSized function and replaced it with calls
to isKnownMultipleOf(8).
I've also renamed NextPowerOf2 to be coefficientNextPowerOf2 so
that it's more consistent with coefficientDivideBy.
Differential Revision: https://reviews.llvm.org/D88409
Currently we allow passing pointers from deopt bundle on VReg only if
they were seen in list of gc-live pointers passed on VRegs.
This means that for the case of empty gc-live bundle we spill deopt
bundle's pointers. This change allows lowering deopt pointers to VRegs
in case of empty gc-live bundle. In case of non-empty gc-live bundle,
behavior does not change.
Reviewed By: skatkov
Differential Revision: https://reviews.llvm.org/D88999
Summary: This patch is derived from D87384.
In this patch we expand the existing decomposition of mul-by-constant to be more general by implementing 2 patterns:
```
mul x, (2^N + 2^M) --> (add (shl x, N), (shl x, M))
mul x, (2^N - 2^M) --> (sub (shl x, N), (shl x, M))
```
The conversion will be trigged if the multiplier is a big constant that the target can't use a single multiplication instruction to handle. This is controlled by the hook `decomposeMulByConstant`.
More over, the conversion benefits from an ILP improvement since the instructions are independent. A case with the sequence like following also gets benefit since a shift instruction is saved.
```
*res1 = a * 0x8800;
*res2 = a * 0x8080;
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D88201
The STRICT was causing unnecessary confusion. I think SEQ is a more accurate
name for what they actually do, and the other obvious option of "ORDERED"
has the issue of already having a meaning in FP contexts.
Differential Revision: https://reviews.llvm.org/D88791
We were already doing this for integer constants. This patch implements
the same thing for floating point constants.
Differential Revision: https://reviews.llvm.org/D88570
Current Statepoint MI format is this:
STATEPOINT
<id>, <num patch bytes >, <num call arguments>, <call target>,
[call arguments...],
<StackMaps::ConstantOp>, <calling convention>,
<StackMaps::ConstantOp>, <statepoint flags>,
<StackMaps::ConstantOp>, <num deopt args>, [deopt args...],
<gc base/derived pairs...> <gc allocas...>
Note that GC pointers are listed in pairs <base,derived>.
This causes base pointers to appear many times (at least twice) in
instruction, which is bad for us when VReg lowering is ON.
The problem is that machine operand tiedness is 1-1 relation, so
it might look like this:
%vr2 = STATEPOINT ... %vr1, %vr1(tied-def0)
Since only one instance of %vr1 is tied, that may lead to incorrect
codegen (see PR46917 for more details), so we have to always spill
base pointers. This mostly defeats new VReg lowering scheme.
This patch changes statepoint instruction format so that every
gc pointer appears only once in operand list. That way they all can
be tied. Additional set of operands is added to preserve base-derived
relation required to build stackmap.
New statepoint has following format:
STATEPOINT
<id>, <num patch bytes>, <num call arguments>, <call target>,
[call arguments...],
<StackMaps::ConstantOp>, <calling convention>,
<StackMaps::ConstantOp>, <statepoint flags>,
<StackMaps::ConstantOp>, <num deopt args>, [deopt args...],
<StackMaps::ConstantOp>, <num gc pointers>, [gc pointers...],
<StackMaps::ConstantOp>, <num gc allocas>, [gc allocas...]
<StackMaps::ConstantOp>, <num entries in gc map>, [base/derived indices...]
Changes are:
- every gc pointer is listed only once in a flat length-prefixed list;
- alloca list is prefixed with its length too;
- following alloca list is length-prefixed list of base-derived
indices of pointers from gc pointer list. Note that indices are
logical (number of pointer), not absolute (index of machine operand).
Differential Revision: https://reviews.llvm.org/D87154
In DAGCombiner::ForwardStoreValueToDirectLoad I have fixed up some
implicit casts from TypeSize -> uint64_t and replaced calls to
getVectorNumElements() with getVectorElementCount(). There are some
simple cases of forwarding that we can definitely support for
scalable vectors, i.e. when the store and load are both scalable
vectors and have the same size. I have added tests for the new
code paths here:
CodeGen/AArch64/sve-forward-st-to-ld.ll
Differential Revision: https://reviews.llvm.org/D87098
getNode handling for ISD:SETCC calls FoldSETCC which can canonicalize
FP constants to the RHS. When this happens we should create the node
with the FMF that was requested. By using FlagInserter when can ensure
any calls to getNode/getSetcc during canonicalization will also get the flags.
Differential Revision: https://reviews.llvm.org/D88063
I have fixed up a number of warnings resulting from TypeSize -> uint64_t
casts and calling getVectorNumElements() on scalable vector types. I
think most of the changes are fairly trivial except for those in
DAGTypeLegalizer::SplitVecRes_MSTORE I've tried to ensure we create
the MachineMemoryOperands in a sensible way for scalable vectors.
I have added a CHECK line to the following test:
CodeGen/AArch64/sve-split-store.ll
that ensures no new warnings are added.
Differential Revision: https://reviews.llvm.org/D86928
This reverts partial of a2fb5446 (actually, 2508ef01) about removing
negated FP constant immediately if it has no uses. However, as discussed
in bug 47517, there're cases when NegX is folded into constant from
other places while NegY is removed by that line of code and NegX is
equal to NegY. In these cases, NegX is deleted before used and crash
happens. So revert the code and add necessary test case.
In the motivating case from https://llvm.org/PR47517
we create a node that does not get constant folded
before getNegatedExpression is attempted from some
other node, and we crash.
By moving the fold into SelectionDAG::simplifyFPBinop(),
we get the constant fold sooner and avoid the problem.
This is similar to D87251, but for CopyFromRegs nodes.
Even for local statepoint uses we generate CopyToRegs/CopyFromRegs
nodes. When generating CopyFromRegs in visitGCRelocate, we must chain
to current DAG root, not EntryNode, to ensure proper ordering of copy
w.r.t. statepoint node producing result for it.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D88639
When we know that a particular type is always going to be fixed
width we have so far been writing code like this:
getSizeInBits().getFixedSize()
Since we are doing this in quite a few places now it seems to make
sense to add a new helper function that allows us to replace
these calls with a single getFixedSizeInBits() call.
Differential Revision: https://reviews.llvm.org/D88649
This patch adds FP_EXTEND_MERGE_PASSTHRU & FP_ROUND_MERGE_PASSTHRU
ISD nodes, used to lower scalable vector fp_extend/fp_round operations.
fp_round has an additional argument, the 'trunc' flag, which is an integer of zero or one.
This also fixes a warning introduced by the new tests added to sve-split-fcvt.ll,
resulting from an implicit TypeSize -> uint64_t cast in SplitVecOp_FP_ROUND.
Reviewed By: sdesmalen, paulwalker-arm
Differential Revision: https://reviews.llvm.org/D88321
After some recent upstream discussion we decided that it was best
to avoid having the / operator for both ElementCount and TypeSize,
since this could give the impression that these classes can be used
in the same way as basic integer integer types. However, division
for scalable types is a bit odd because we are only dividing the
minimum quantity by a value, as opposed to something like:
(MinSize * Vscale) / SomeValue
This is why when performing division it's important the caller
first establishes whether the operation makes sense, perhaps by
calling isKnownMultipleOf() prior to division. The caller must now
explictly call divideCoefficientBy() on the class to perform the
operation.
Differential Revision: https://reviews.llvm.org/D87700
Use +/-Inf or +/-Largest as neutral element for nnan fmin/fmax
reductions. This avoids dropping any FMF flags. Preserving the
nnan flag in particular is important to get a good lowering on X86.
Differential Revision: https://reviews.llvm.org/D87586
If we're multiplying all elements of a vector by '0' or '1' then we can more efficiently perform this as a clearing mask (that is likely to further simplify to a shuffle blend).
This was noticed when reviewing D87502 but seems to help idiv/irem by constant cases even more as '0'/'1' values are often used for 'passthrough' cases.
Differential Revision: https://reviews.llvm.org/D88225
This is like FastMathFlagGuard in IR. Since we use SDAG instance to get
values, it's with SelectionDAG. By creating a FlagInserter in current
scope, all values created by getNode will get the flags if no Flags
argument provided.
In this patch, I applied it to floating point operations folding part in
DAG combiner, and removed Flags passing to getNode to show its effect.
Other places in DAG combiner and other helper methods similar to getNode
also need this. They can be done in follow-up patches.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87361
When processing PHI nodes after a callbr, we need to make sure that the
PHI nodes on the default branch are resolved after the callbr
(inserted after INLINEASM_BR). The PHI node values on the indirect
branches are processed before the INLINEASM_BR.
Differential Revision: https://reviews.llvm.org/D86260
Previously, if a floating-point type was legal, but FNEG wasn't legal,
we would use FSUB. Instead, we should use integer ops, to preserve the
semantics. (Alternatively, there's a compiler-rt call we could use, but
there isn't much reason to use that.)
It turns out we actually are still using this obscure codepath in a few
cases: on some targets, we have "legal" floating-point types that don't
actually support any floating-point operations. In particular, ARM and
AArch64 are using this path.
The implementation for SelectionDAG is pretty simple because we can
reuse the infrastructure from FCOPYSIGN.
See also 9a3dc3e, the corresponding change to type legalization.
Also includes a "bonus" change to STRICT_FSUB legalization, so we can
lower a STRICT_FSUB to a float libcall.
Includes the changes to both LegalizeDAG and GlobalISel so we don't have
inconsistent results in the future.
Fixes https://bugs.llvm.org/show_bug.cgi?id=46792 .
Differential Revision: https://reviews.llvm.org/D84287
An existing function Type::getScalarSizeInBits returns a uint64_t
instead of a TypeSize class because the caller is requesting a
scalar size, which cannot be scalable. This patch makes other
similar functions requesting a scalar size consistent with that,
thereby eliminating more than 1000 implicit TypeSize -> uint64_t
casts.
Differential revision: https://reviews.llvm.org/D87889
Just scalarize trunc stores - GenWidenVectorTruncStores does the same thing but is flawed (PR42046) and unused.
Differential Revision: https://reviews.llvm.org/D87708
When exporting statepoint results to virtual registers we try to avoid
generating exports for duplicated inputs. But we erroneously use
IR Value* to check if inputs are duplicated. Instead, we should use
SDValue, because even different IR values can get lowered to the same
SDValue.
I'm adding a (degenerate) test case which emphasizes importance of this
feature for invoke statepoints.
If we fail to export only unique values we will end up with something
like that:
%0 = STATEPOINT
%1 = COPY %0
landing_pad:
<use of %1>
And when exceptional path is taken, %1 is left uninitialized (COPY is never
execute).
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87695
This reverts commit 0345d88de6.
Google internal backend uses EntrySU, we are looking into removing
dependency on it.
Differential Revision: https://reviews.llvm.org/D88018
SelectionDAGBuilder was inconsistently mangling values based on ABI
Calling Conventions when getting them through copyFromRegs in
SelectionDAGBuilder, causing duplicate value type convertions for
function arguments. The checking for the mangling requirement was based
on the value's originating instruction and was performed outside of, and
inspite of, the regular Calling Convention Lowering.
The issue could be observed in a scenario such as:
```
%arg1 = load half, half* %const, align 2
%arg2 = call fastcc half @someFunc()
call fastcc void @otherFunc(half %arg1, half %arg2)
; Here, %arg2 was incorrectly mangled twice, as the CallConv data from
; the call to @someFunc() was taken into consideration for the check
; when getting the value for processing the call to @otherFunc(...),
; after the proper convertion had taken place when lowering the return
; value of the first call.
```
This patch fixes the issue by disregarding the Calling Convention
information for such copyFromRegs, making sure the ABI mangling is
properly contanined in the Calling Convention Lowering.
This fixes Bugzilla #47454.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87844
This is a follow-up of D86605. For strict DAG FP node, if its FP
exception behavior metadata is ignore, it should have nofpexcept flag.
But during custom lowering, this flag isn't passed down.
This is also seen on X86 target.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D87390
2508ef01 fixed a bug about constant removal in negation. But after
sanitizing check I found there's still some issue about it so it's
reverted.
Temporary nodes will be removed if useless in negation. Before the
removal, they'd be checked if any other nodes used it. So the removal
was moved after getNode. However in rare cases the node to be removed is
the same as result of getNode. We missed that and will be fixed by this
patch.
Reviewed By: steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
If we have an all ones mask, we can just a regular masked load. InstCombine already gets this in IR. But the all ones mask can appear after type legalization.
Only avx512 test cases are affected because X86 backend already looks for element 0 and the last element being 1. It replaces this with an unmasked load and blend. The all ones mask is a special case of that where the blend will be removed. That transform is only enabled on avx2 targets. I believe that's because a non-zero passthru on avx2 already requires a separate blend so its more profitable to handle mixed constant masks.
This patch adds a dedicated all ones handling to the target independent DAG combiner. I've skipped extending, expanding, and index loads for now. X86 doesn't use index so I don't know much about it. Extending made me nervous because I wasn't sure I could trust the memory VT had the right element count due to some weirdness in vector splitting. For expanding I wasn't sure if we needed different undef handling.
Differential Revision: https://reviews.llvm.org/D87788
Fix lowering and instruction selection for v3x16 types
and enable InstCombine to emit them.
This patch only implements it for the selection dag.
GlobalISel tests in GlobalISel/llvm.amdgcn.image.load.1d.d16.ll and
GlobalISel/llvm.amdgcn.image.store.2d.d16.ll still don't work.
Differential Revision: https://reviews.llvm.org/D84420
2508ef01 doesn't totally fix the issue since we did not handle the case
when unused temporary negated result is the same with the result, which
is found by address sanitizer.
960cbc53 immediately removes nodes that won't be used to avoid
compilation time explosion. This patch adds the removal to constants to
fix PR47517.
Reviewed By: RKSimon, steven.zhang
Differential Revision: https://reviews.llvm.org/D87614
The versions that take 'unsigned' will be removed in the future.
I tried to use getOriginalAlign instead of getAlign in some
places. getAlign factors in the minimum alignment implied by
the offset in the pointer info. Since we're also passing the
pointer info we can use the original alignment.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D87592
The code that decomposes the GEP into ADD/MUL doesn't work properly
for vector GEPs. It can create bad COPY instructions or possibly
assert.
For now just bail out to SelectionDAG.
Fixes PR45906
This adds SoftenFloatRes, PromoteFloatRes and SoftPromoteHalfRes
legalizations for VECREDUCE, to fill the remaining hole in the SDAG
legalization. These legalizations simply expand the reduction and
let it be recursively legalized. For the PromoteFloatRes case at
least it is possible to do better than that, but it's pretty tricky
(because we need to consider the interaction of three different
vector legalizations and the type promotion) and probably not
really worthwhile.
I haven't added ExpandFloatRes support, as I am not familiar with
ppc_fp128.
Differential Revision: https://reviews.llvm.org/D87569
Similar to D87415, this folds the various float min/max opcodes
with a constant INF or -INF operand, or FLT_MAX / -FLT_MAX operand
if the ninf flag is set. Some of the folds are only possible under
nnan.
The fminnum(X, INF) with nnan and fmaxnum(X, -INF) with nnan cases
are needed to improve the VECREDUCE_FMIN/FMAX lowerings on X86,
the rest is here for the sake of completeness.
Differential Revision: https://reviews.llvm.org/D87571
In an earlier patch I meant to add the correct flags to the ADD
node when incrementing the pointer, but forgot to pass them to
SelectionDAG::getNode.
Differential Revision: https://reviews.llvm.org/D87496
Previously, we formed ISD::PARITY by looking for (and (ctpop X), 1)
but the AND might be separated from the ctpop. For example if the
parity result is multiplied by 2, we'll pull the AND through the
shift.
So to handle more cases, move to SimplifyDemandedBits where we
can handle more cases that result in only the LSB of the CTPOP
being used.
DAG combiner folds (fma a 1.0 b) into (fadd a b) but the flag isn't
propagated into new fadd. This patch fixes that.
Some code in visitFMA is redundant and such support for vector constants
is missing. Need follow-up patch to clean.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D87037
CTTZ, CTLZ, CTPOP, and FCANONICALIZE all have the same input and
output types so the operand should have already been legalized when the
result type was legalized.
Clang emits (and (ctpop X), 1) for __builtin_parity. If ctpop
isn't natively supported by the target, this leads to poor codegen
due to the expansion of ctpop being more complex than what is needed
for parity.
This adds a DAG combine to convert the pattern to ISD::PARITY
before operation legalization. Type legalization is updated
to handled Expanding and Promoting this operation. If after type
legalization, CTPOP is supported for this type, LegalizeDAG will
turn it back into CTPOP+AND. Otherwise LegalizeDAG will emit a
series of shifts and xors followed by an AND with 1.
I've avoided vectors in this patch to avoid more legalization
complexity for this patch.
X86 previously had a custom DAG combiner for this. This is now
moved to Custom lowering for the new opcode. There is a minor
regression in vector-reduce-xor-bool.ll, but a follow up patch
can easily fix that.
Fixes PR47433
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D87209
As discussed on llvm-dev:
http://lists.llvm.org/pipermail/llvm-dev/2020-April/140729.html
This is hopefully the final remaining showstopper before we can remove
the 'experimental' from the reduction intrinsics.
No behavior was specified for the FP min/max reductions, so we have a
mess of different interpretations.
There are a few potential options for the semantics of these max/min ops.
I think this is the simplest based on current behavior/implementation:
make the reductions inherit from the existing llvm.maxnum/minnum intrinsics.
These correspond to libm fmax/fmin, and those are similar to the (now
deprecated?) IEEE-754 maxNum/minNum functions (NaNs are treated as missing
data). So the default expansion creates calls to libm functions.
Another option would be to inherit from llvm.maximum/minimum (NaNs propagate),
but most targets just crash in codegen when given those nodes because no
default expansion was ever implemented AFAICT.
We could also just assume 'nnan' semantics by default (we are already
assuming 'nsz' semantics in the maxnum/minnum intrinsics), but some targets
(AArch64, PowerPC) support the more defined behavior, so it doesn't make much
sense to not allow a tighter spec. Fast-math-flags (nnan) can be used to
loosen the semantics.
(Note that D67507 was proposed to update the LangRef to acknowledge the more
recent IEEE-754 2019 standard, but that patch seems to have stalled. If we do
update based on the new standard, the reduction instructions can seamlessly
inherit from whatever updates are made to the max/min intrinsics.)
x86 sees a regression here on 'nnan' tests because we have underlying,
longstanding bugs in FMF creation/propagation. Those need to be fixed apart
from this change (for example: https://llvm.org/PR35538). The expansion
sequence before this patch may not have been correct.
Differential Revision: https://reviews.llvm.org/D87391
Truncating from an illegal SVE type to a legal type, e.g.
`trunc <vscale x 4 x i64> %in to <vscale x 4 x i32>`
fails after PromoteIntOp_CONCAT_VECTORS attempts to
create a BUILD_VECTOR.
This patch changes the promote function to create a sequence of
INSERT_SUBVECTORs if the return type is scalable, and replaces
these with UNPK+UZP1 for AArch64.
Reviewed By: paulwalker-arm
Differential Revision: https://reviews.llvm.org/D86548
fminnum(X, NaN) is X, fminimum(X, NaN) is NaN. This mirrors the
behavior of existing InstSimplify folds.
This is expected to improve the reduction lowerings in D87391,
which use NaN as a neutral element.
Differential Revision: https://reviews.llvm.org/D87415
During the main DAGCombine loop, whenever a node gets replaced, the new
node and all its users are pushed onto the worklist. Omit this if the
new node is the EntryToken (e.g. if a store managed to get optimized
out), because re-visiting the EntryToken and its users will not uncover
any additional opportunities, but there may be a large number of such
users, potentially causing compile time explosion.
This compile time explosion showed up in particular when building the
SingleSource/UnitTests/matrix-types-spec.cpp test-suite case on any
platform without SIMD vector support.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86963
Since we always generate CopyToRegs for statepoint results,
we must update DAG root after emitting statepoint, so that
these copies are scheduled before any possible local uses.
Note: getControlRoot() flushes all PendingExports, not only
those we generates for relocates. If that'll become a problem,
we can change it to flushing relocate exports only.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87251
Current code in InstEmitter assumes all GC pointers are either
VRegs or stack slots - hence, taking only one operand.
But it is possible to have constant base, in which case it
occupies two machine operands.
Add a convinience function to StackMaps to get index of next
meta argument and use it in InsrEmitter to properly advance to
the next statepoint meta operand.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D87252
This removes the after the fact FMF handling from D46854 in favor of passing fast math flags to getNode. This should be a superset of D87130.
This required adding a SDNodeFlags to SelectionDAG::getSetCC.
Now we manage to contant fold some stuff undefs during the
initial getNode that we don't do in later DAG combines.
Differential Revision: https://reviews.llvm.org/D87200
On SystemZ, a ZERO_EXTEND of an i1 vector handled by WidenVecRes_Convert()
always ended up being scalarized, because the type action of the input is
promotion which was previously an unhandled case in this method.
This fixes https://bugs.llvm.org/show_bug.cgi?id=47132.
Differential Revision: https://reviews.llvm.org/D86268
Patch by Eli Friedman.
Review: Ulrich Weigand
Rather than using SELECT instructions, use SRA, UADDO/ADDCARRY and
XORs to expand ABS. This is the multi-part version of the sequence
we use in LegalizeDAG.
It's also the same as the Custom sequence uses for i64 on 32-bit
and i128 on 64-bit. So we can remove the X86 customization.
Reviewed By: RKSimon
Differential Revision: https://reviews.llvm.org/D87215
This is a follow-up suggested in D86420 - if we have a pair of stores
in inverted order for the target endian, we can rotate the source
bits into place.
The "be_i64_to_i16_order" test shows a limitation of the current
function (which might be avoided if we integrate this function with
the other cases in mergeConsecutiveStores). In the earlier
"be_i64_to_i16" test, we skip the first 2 stores because we do not
match the full set as consecutive or rotate-able, but then we reach
the last 2 stores and see that they are an inverted pair of 16-bit
stores. The "be_i64_to_i16_order" test alters the program order of
the stores, so we miss matching the sub-pattern.
Differential Revision: https://reviews.llvm.org/D87112
In getMemcpyLoadsAndStores(), a memcpy where the source is a zero constant is expanded to a MemOp::Set instead of a MemOp::Copy, even when the memcpy is volatile.
This is incorrect.
The fix is to add a check for volatile, and expand to MemOp::Copy in the volatile case.
Reviewed By: chill
Differential Revision: https://reviews.llvm.org/D87134
Previously SDNodeFlags::instersectWith(Flags) would do nothing if Flags was
in an undefined state, which is very bad given that this is the default when
getNode() is called without passing an explicit SDNodeFlags argument.
This meant that if an already existing and reused node had a flag which the
second caller to getNode() did not set, that flag would remain uncleared.
This was exposed by https://bugs.llvm.org/show_bug.cgi?id=47092, where an NSW
flag was incorrectly set on an add instruction (which did in fact overflow in
one of the two original contexts), so when SystemZElimCompare removed the
compare with 0 trusting that flag, wrong-code resulted.
There is more that needs to be done in this area as discussed here:
Differential Revision: https://reviews.llvm.org/D86871
Review: Ulrich Weigand, Sanjay Patel
I have fixed up some more ElementCount/TypeSize related warnings in
the following tests:
CodeGen/AArch64/sve-split-extract-elt.ll
CodeGen/AArch64/sve-split-insert-elt.ll
In SelectionDAG::CreateStackTemporary we were relying upon the implicit
cast from TypeSize -> uint64_t when calling MachineFrameInfo::CreateStackObject.
I've fixed this by passing in the known minimum size instead, which I
believe is fine because the associated stack id indicates whether this
is a scalable object or not.
I've also fixed up a case in TargetLowering::SimplifyDemandedBits when
extracting a vector element from a scalable vector. The result is a scalar,
hence it wasn't caught at the start of the function. If the vector is
scalable we just bail out for now.
Differential Revision: https://reviews.llvm.org/D86431
Use forward declarations and move the include down to dependent files that actually use it.
This also exposes a number of implicit dependencies on KnownBits.h
When lowering fixed length vector operations for SVE the subvector
operations are used extensively to marshall data between scalable
and fixed-length vectors. This means that sequences like:
extract_subvec(binop(insert_subvec(a), insert_subvec(b)))
are very common. DAGCombine only checks if the resulting binop is
legal or can be custom lowered when undoing such sequences. When
it's custom lowering that is introducing them the result is an
infinite legalise->combine->legalise loop.
This patch extends the isOperationLegalOr... functions to include
a "LegalOnly" parameter to restrict the check to legal operations
only. Although isOperationLegal could be used it's common for
the affected code paths to be visited pre and post legalisation,
so the extra parameter keeps the code tidy.
Differential Revision: https://reviews.llvm.org/D86450
Unwinders may only preserve the lower 64bits of Neon and SVE registers,
as only the registers in the base ABI are guaranteed to be preserved
over the exception edge. The caller will need to preserve additional
registers for when the call throws an exception and the unwinder has
tried to recover state.
For e.g.
svint32_t bar(svint32_t);
svint32_t foo(svint32_t x, bool *err) {
try { bar(x); } catch (...) { *err = true; }
return x;
}
`z0` needs to be spilled before the call to `bar(x)` and reloaded before
returning from foo, as the exception handler may have clobbered z0.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84737
I have fixed up a number of warnings resulting from TypeSize -> uint64_t
casts and calling getVectorNumElements() on scalable vector types. I
think most of the changes are fairly trivial except for those in
DAGTypeLegalizer::SplitVecRes_MLOAD I've tried to ensure we create
the MachineMemoryOperands in a sensible way for scalable vectors.
I have added a CHECK line to the following test:
CodeGen/AArch64/sve-split-load.ll
that ensures no new warnings are added.
Differential Revision: https://reviews.llvm.org/D86697
fabs and fneg share a common transformation:
(fneg (bitconvert x)) -> (bitconvert (xor x sign))
(fabs (bitconvert x)) -> (bitconvert (and x ~sign))
This patch separate the code into a single method.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86862
I tried to fix this in:
rG716e35a0cf53
...but that patch depends on the order that we encounter the
magic "x/sqrt(x)" expression in the combiner's worklist.
This patch should improve that by waiting until we walk the
user list to decide if there's a use to skip.
The AArch64 test reveals another (existing) ordering problem
though - we may try to create an estimate for plain sqrt(x)
before we see that it is part of a 1/sqrt(x) expression.
In general, we probably want to try the multi-use reciprocal
transform before sqrt transforms, but x/sqrt(x) is a special-case
because that will always reduce to plain sqrt(x) or an estimate.
The AArch64 tests show that the transform is limited by TLI
hook to patterns where there are 3 or more uses of the divisor.
So this change can result in an extra division compared to
what we had, but that's the intended behvior based on the
current setting of that hook.
Current `v:t = zext(setcc x,y,cc)` will be transformed to `select x, y, 1:t, 0:t, cc`. It misses some opportunities if x's type size is less than `t`'s size. This patch enhances the above transformation.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86687
There is a subtle problem with new statepoint lowering scheme
when base and pointers are the same (see PR46917 for more context):
%1 = STATEPOINT ... %0, %0(tied-def 0)...
if, for some reason, register allocator desides to put two instances
of %0 into two different objects (registers or spill slots), we may
end up with
$reg3 = STATEPOINT ... $reg2, $reg1(tied-def 0)...
and nothing will prevent later passes to sink uses of $reg2 below
statepoint, which is incorrect.
As a short term solution, always put base pointers on stack during
lowering.
A longer term solution may be to rework MIR statepoint format to
avoid GC pointer duplication in statepoint argument list.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D86712
This is the follow up patch for https://reviews.llvm.org/D86183 as we miss to delete the node if NegX == NegY, which has use after we create the node.
```
if (NegX && (CostX <= CostY)) {
Cost = std::min(CostX, CostZ);
RemoveDeadNode(NegY);
return DAG.getNode(Opcode, DL, VT, NegX, Y, NegZ, Flags); #<-- NegY is used here if NegY == NegX.
}
```
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D86689
This patch changes ElementCount so that the Min and Scalable
members are now private and can only be accessed via the get
functions getKnownMinValue() and isScalable(). In addition I've
added some other member functions for more commonly used operations.
Hopefully this makes the class more useful and will reduce the
need for calling getKnownMinValue().
Differential Revision: https://reviews.llvm.org/D86065
When joining the legal parts of vector arguments into its original value
during the lower of Formal Arguments in SelectionDAGBuilder, the Calling
Convention information was not being propagated for the handling of each
individual parts. The same did not happen when lowering calls, causing a
mismatch.
This patch fixes the issue by properly propagating the Calling
Convention details.
This fixes Bugzilla #47001.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D86715
This is the first of a set of DAGCombiner changes enabling strictfp
optimizations. I want to test to waters with this to make sure changes
like these are acceptable for the strictfp case- this particular change
should preserve exception ordering and result precision perfectly, and
many other possible changes appear to be able to as well.
Copied from regular fadd combines but modified to preserve ordering via
the chain, this change allows strict_fadd x, (fneg y) to become
struct_fsub x, y and strict_fadd (fneg x), y to become strict_fsub y, x.
Differential Revision: https://reviews.llvm.org/D85548
We have a gap in our store merging capabilities for shift+truncate
patterns as discussed in:
https://llvm.org/PR46662
I generalized the code/comments for this function in earlier commits,
so we only need ease the type restriction and adjust the address/endian
checking to make this work.
AArch64 lets us switch endian to make sure that patterns are matched
either way.
Differential Revision: https://reviews.llvm.org/D86420
This adapts legalization of intrinsic get.active.lane.mask to the new semantics
as described in D86147. Because the second argument is now the loop tripcount,
we legalize this intrinsic to an 'icmp ULT' instead of an ULE when it was the
backedge-taken count.
Differential Revision: https://reviews.llvm.org/D86302
Also updates isConstOrConstSplatFP to allow the mul(A,-1) -> neg(A)
transformation when -1 is expressed as an ISD::SPLAT_VECTOR.
Differential Revision: https://reviews.llvm.org/D86415
With FMF ( "nsz" and " reassoc") fold X/Sqrt(X) to Sqrt(X).
This is done after targets have the chance to produce a
reciprocal sqrt estimate sequence because that expansion
is probably more efficient than an expansion of a
non-reciprocal sqrt. That is also why we deferred doing
this transform in IR (D85709).
Differential Revision: https://reviews.llvm.org/D86403
D77152 tried to do this but got it wrong in the shift-by-zero case.
D86430 reverted the wrong code. Reimplement the optimization with
different code depending on whether the shift amount is known to be
non-zero (modulo bitwidth).
This improves code quality for fshl tests on AMDGPU, which only has an
fshr instruction.
Differential Revision: https://reviews.llvm.org/D86438
This is a fixup of commit 0819a6416f (D77152) which could
result in miscompiles. The miscompile could only happen for targets
where isOperationLegalOrCustom could return different values for
FSHL and FSHR.
The commit mentioned above added logic in expandFunnelShift to
convert between FSHL and FSHR by swapping direction of the
funnel shift. However, that transform is only legal if we know
that the shift count (modulo bitwidth) isn't zero.
Basically, since fshr(-1,0,0)==0 and fshl(-1,0,0)==-1 then doing a
rewrite such as fshr(X,Y,Z) => fshl(X,Y,0-Z) would be incorrect if
Z modulo bitwidth, could be zero.
```
$ ./alive-tv /tmp/test.ll
----------------------------------------
define i32 @src(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = fshl i32 %x, i32 %y, i32 %z
ret i32 %t0
}
=>
define i32 @tgt(i32 %x, i32 %y, i32 %z) {
%0:
%t0 = sub i32 32, %z
%t1 = fshr i32 %x, i32 %y, i32 %t0
ret i32 %t1
}
Transformation doesn't verify!
ERROR: Value mismatch
Example:
i32 %x = #x00000000 (0)
i32 %y = #x00000400 (1024)
i32 %z = #x00000000 (0)
Source:
i32 %t0 = #x00000000 (0)
Target:
i32 %t0 = #x00000020 (32)
i32 %t1 = #x00000400 (1024)
Source value: #x00000000 (0)
Target value: #x00000400 (1024)
```
It could be possible to add back the transform, given that logic
is added to check that (Z % BW) can't be zero. Since there were
no test cases proving that such a transform actually would be useful
I decided to simply remove the faulty code in this patch.
Reviewed By: foad, lebedev.ri
Differential Revision: https://reviews.llvm.org/D86430
D70867 introduced support for expanding most ppc_fp128 operations. But
sitofp/uitofp is missing. This patch adds that after D81669.
Reviewed By: uweigand
Differntial Revision: https://reviews.llvm.org/D81918
The pattern matching does not account for truncating stores,
so it is unlikely to work at later stages. So we are likely
wasting compile-time with no hope of improvement by running
this later.
This should be NFC in terms of output because the endian
check further down would bail out too, but we are wasting
time by waiting to that point to give up. If we generalize
that function to deal with more than i8 types, we should
not have to deal with the degenerate case.
In SelectionDAGBuilder always translate the fshl and fshr intrinsics to
FSHL and FSHR (or ROTL and ROTR) instead of lowering them to shifts and
ORs. Improve the legalization of FSHL and FSHR to avoid code quality
regressions.
Differential Revision: https://reviews.llvm.org/D77152
In DAGTypeLegalizer::GenWidenVectorLoads the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the code in that
function to use TypeSize instead of unsigned for tracking the remaining
load amount. In addition, I've changed the load loop to use the new
IncrementPointer helper function for updating the addresses in each
iteration, since this handles scalable vector types.
Also, I've added report_fatal_errors in GenWidenVectorExtLoads,
TargetLowering::scalarizeVectorLoad and TargetLowering::scalarizeVectorStores,
since these functions currently use a sequence of element-by-element
scalar loads/stores. In a similar vein, I've also added a fatal error
report in FindMemType for the case when we decide to return the element
type for a scalable vector type.
I've added new tests in
CodeGen/AArch64/sve-split-load.ll
CodeGen/AArch64/sve-ld-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorLoads.
Differential Revision: https://reviews.llvm.org/D85909
The "isa" checks were less constrained because they allow
target constants, but the later matching code would bail
out on those anyway, so this should be slightly more
efficient.
This patch changes SplitVecOp_EXTRACT_VECTOR_ELT to work correctly
for scalable vectors and also fixes an a bug in DAGCombiner where
the scalable property is dropped in visitTRUNCATE when attempting
to fold an extract + a truncate.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85754
In DAGTypeLegalizer::GenWidenVectorStores the algorithm assumes it only
ever deals with fixed width types, hence the offsets for each individual
store never take 'vscale' into account. I've changed the main loop in
that function to use TypeSize instead of unsigned for tracking the
remaining store amount and offset increment. In addition, I've changed
the loop to use the new IncrementPointer helper function for updating
the addresses in each iteration, since this handles scalable vector
types.
Whilst fixing this function I also fixed a minor issue in
IncrementPointer whereby we were not adding the no-unsigned-wrap flag
for the add instruction in the same way as the fixed width case does.
Also, I've added a report_fatal_error in GenWidenVectorTruncStores,
since this code currently uses a sequence of element-by-element scalar
stores.
I've added new tests in
CodeGen/AArch64/sve-intrinsics-stores.ll
CodeGen/AArch64/sve-st1-addressing-mode-reg-imm.ll
for the changes in GenWidenVectorStores.
Differential Revision: https://reviews.llvm.org/D84937
In narrowExtractedVectorLoad there is an optimisation that tries to
combine extract_subvector with a narrowing vector load. At the moment
this produces warnings due to the incorrect calls to
getVectorNumElements() for scalable vector types. I've got this
working for scalable vectors too when the extract subvector index
is a multiple of the minimum number of elements. I have added a
new variant of the function:
MachineFunction::getMachineMemOperand
that copies an existing MachineMemOperand, but replaces the pointer
info with a null version since we cannot currently represent scaled
offsets.
I've added a new test for this particular case in:
CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D83950
In this patch I have fixed two issues:
1. Our SVE tuple get/set intrinsics were using the wrong constant type
for the index passed to EXTRACT_SUBVECTOR. I have fixed this by using the
function SelectionDAG::getVectorIdxConstant to create the value. Also, I
have updated the documentation for EXTRACT_SUBVECTOR describing what type
the constant index should be and we now enforce this when creating the
node.
2. The AArch64 backend was missing the appropriate patterns for
extracting certain subvectors (nxv4f16 and nxv2f32) from legal SVE types.
I have added them as part of this patch.
The only way that I could find to test the new patterns was to use the
SVE tuple get intrinsics, although I realise it looks a bit unusual.
Tests added here:
test/CodeGen/AArch64/sve-extract-subvector.ll
Differential Revision: https://reviews.llvm.org/D85516
When the result type of insertelement needs to be split,
SplitVecRes_INSERT_VECTOR_ELT will try to store the vector to a
stack temporary, store the element at the location of the stack
temporary plus the index, and reload the Lo/Hi parts.
This patch does the following to ensure this works for scalable vectors:
- Sets the StackID with getStackIDForScalableVectors() in CreateStackTemporary
- Adds an IsScalable flag to getMemBasePlusOffset() and scales the
offset by VScale when this is true
- Ensures the immediate is clamped correctly by clampDynamicVectorIndex
so that we don't try to use an out of range index
Reviewed By: david-arm
Differential Revision: https://reviews.llvm.org/D84874
Changes the Offset arguments to both functions from int64_t to TypeSize
& updates all uses of the functions to create the offset using TypeSize::Fixed()
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D85220
These aren't the canonical forms we'd get from InstCombine, but
we do have X86 tests for them. Recognizing them is pretty cheap.
While there make use of APInt:isSignedMinValue/isSignedMaxValue
instead of creating a new APInt to compare with. Also use
SelectionDAG::getAllOnesConstant helper to hide the all ones
APInt creation.
Follow-up to D82716 / rGea71ba11ab11
We do not have the fabs removal fold in IR yet for the case
where the sqrt operand is repeated, so that's another potential
improvement.
As mentioned on D85463, we should be using SimplifyMultipleUseDemandedBits (which is the default fallback).
The minor regression in illegal-bitfield-loadstore.ll will be addressed properly by D77804.
One of the callers only wants the condition, but the vselect can
be simplified by getNode making it hard or impossible to retrieve
the condition.
Instead, return the condition and make the other 2 callers
responsible for creating the vselect node using the condition.
Rename the function to WidenVSELECTMask accordingly.
Differential Revision: https://reviews.llvm.org/D85468
This allows us to remove extra patterns from AArch64SVEInstrInfo.td
because we can reuse those required for fixed length vectors.
Differential Revision: https://reviews.llvm.org/D85328
We currently don't do anything to fold any_extend vector loads as no target has such an instruction.
Instead I've added support for folding to a zextload, SimplifyDemandedBits does a good job of adjusting the zext(truncate(()) stages as required later on.
We still need the custom scalar extload handling instead of using the tryToFoldExtOfLoad helper as it has different legality tests - we can probably tweak that to reduce most of the code duplication.
Fixes the regression I mentioned in rG99a971cadff7
Differential Revision: https://reviews.llvm.org/D85129
This corresponds with the SelectionDAGISel change in D84056.
Also, rename some poorly named tests in CodeGen/X86/fast-isel-fneg.ll with NFC.
Differential Revision: https://reviews.llvm.org/D85149
The custom lowering saves an instruction over the generic expansion, by
taking advantage of the fact that PowerPC shift instructions are well
defined in the shift-by-bitwidth case.
Differential Revision: https://reviews.llvm.org/D83948
This patch stops unconditionally transforming FSUB(-0,X) into an FNEG(X) while building the DAG. There is also one small change to handle the new FSUB(-0,X) similarly to FNEG(X) in the AMDGPU backend.
Differential Revision: https://reviews.llvm.org/D84056
Try to be more consistent with the SDLoc param in the TargetLowering methods.
This also exposes an issue where we were passing a SDNode as a SDLoc, relying on the implicit SDLoc(SDNode) constructor.
Just the obvious implementation that rewrites the result type. Also fix
warning from EXTRACT_SUBVECTOR legalization that triggers on the test.
Differential Revision: https://reviews.llvm.org/D84706
This fixes an assertion failure that was being triggered in
SelectionDAG::getZeroExtendInReg(), where it was trying to extend the <2xi32>
to i64 (which should have been <2xi64>).
Fixes: rdar://66016901
Differential Revision: https://reviews.llvm.org/D84884
This change is mechanical, it just removes the restriction and updates tests. The key building blocks were submitted in 31342eb and 8fe2abc.
Note that this (and preceeding changes) entirely subsumes D83965. I did includes a couple of it's tests.
From the codegen changes, an interesting observation: this doesn't actual reduce spilling, it just let's the register allocator do it's job. That results in a slightly different overall result which has both pros and cons over the eager spill lowering. (i.e. We'll have some perf tuning to do once this is stable.)
Change the way we track how a particular pointer was relocated at a statepoint in selection dag. Previously, we used an optional<location> for the spill lowering, and a block local Register for the newly introduced vreg lowering. Combine all three lowerings (norelocate, spill, and vreg) into a single helper class, and keep a single copy of the information.
This is submitted separately as it really does make the code more readible on it's own, but the indirect motivation is to move vreg tracking from StatepointLowering to FunctionLoweringInfo. This is the last piece needed to support cross block relocations with vregs; that will follow in a separate (non-NFC) patch.
This builds on 3da1a96 on the path towards supporting invokes and cross block relocations. The actual change attempts to be NFC, but does fail in one corner-case explained below.
The change itself is fairly mechanical. Rather than remember SDValues - which are inherently block local - immediately produce a virtual register copy and remember that.
Once this lands, we'll update the FunctionLoweringInfo::StatepointSpillMap map to allow register based lowerings, delete VirtRegs from StatepointLowering, and drop the restriction against cross block relocations. I deliberately separate the semantic part into it's own change for easy of understanding and fault isolation.
The corner-case which isn't quite NFC is that the old implementation implicitly CSEd gc.relocates of the same SDValue regardless of type. The new implementation still only relocates once, but it produces distinct vregs for the bitcast and it's source, whereas SelectionDAG's generic CSE was able to remove the bitcast in the old implementation. Note that the final assembly doesn't change (at least in the test), as our MI level optimizations catch the duplication.
I assert that this is an uninteresting corner-case. It's functionally correct, and if we find a case where this influences performance, we should really be canonicalizing types to i8* at the IR level.
Differential Revision: https://reviews.llvm.org/D84692
I have added tests to:
CodeGen/AArch64/sve-intrinsics-int-arith.ll
for doing simple integer add operations on tuple types. Since these
tests introduced new warnings due to incorrect use of
getVectorNumElements() I have also fixed up these warnings in the
same patch. These fixes are:
1. In narrowExtractedVectorBinOp I have changed the code to bail out
early for scalable vector types, since we've not yet hit a case that
proves the optimisations are profitable for scalable vectors.
2. In DAGTypeLegalizer::WidenVecRes_CONCAT_VECTORS I have replaced
calls to getVectorNumElements with getVectorMinNumElements in cases
that work with scalable vectors. For the other cases I have added
asserts that the vector is not scalable because we should not be
using shuffle vectors and build vectors in such cases.
Differential revision: https://reviews.llvm.org/D84016
In DAGTypeLegalizer::SplitVecOp_EXTRACT_SUBVECTOR I have replaced
calls to getVectorNumElements with getVectorMinNumElements, since
this code path works for both fixed and scalable vector types. For
scalable vectors the index will be multiplied by VSCALE.
Fixes warnings in this test:
sve-sext-zext.ll
Differential revision: https://reviews.llvm.org/D83198
Summary:
In parallelizeChainedStores, a TokenFactor was created with the size greater than 3000.
We found that DAGCombiner::visitTokenFactor will consume a huge amount of time on
such nodes. Since the number of operands already exceeds TokenFactorInlineLimit, we propose
to give up simplification with the consideration of compile time.
Reviewers:
@spatel, @arsenm
Differential Revision:
https://reviews.llvm.org/D84204
(Disabled under flag for the moment)
This is part of a larger project wherein we are finally integrating lowering of gc live operands with the register allocator. Today, we force spill all operands in SelectionDAG. The code to do so is distinctly non-optimal. The approach this patch is working towards is to instead lower the relocations directly into the MI form, and let the register allocator pick which ones get spilled and which stack slots they get spilled to. In terms of performance, the later part is actually more important as it avoids redundant shuffling of values between stack slots.
This particular change adds ISEL support to produce the variadic def STATEPOINT form required by the above. In particular, the first N are lowered to variadic tied def/use pairs. So new statepoint looks like this:
reloc1,reloc2,... = STATEPOINT ..., base1, derived1<tied-def0>, base2, derived2<tied-def1>, ...
N is limited by the maximal number of tied registers machine instruction can have (15 at the moment).
The current patch is restricted to handling relocations within a single basic block. Cross block relocations (e.g. invokes) are handled via the legacy mechanism. This restriction will be relaxed in future patches.
Patch By: dantrushin
Differential Revision: https://reviews.llvm.org/D81648
In the included test case the align 16 allowed the v23f32 load to handled as load v16f32, load v4f32, and load v4f32(one element not used). These loads all need to be concatenated together into a final vector. In this case we tried to concatenate the two v4f32 loads to match the type of the v16f32 load so we could do a second concat_vectors, but those loads alone only add up to v8f32. So we need to two v4f32 undefs to pad it.
It appears we've tried to hack around a similar issue in this code before by adding undef padding to loads in one of the earlier loops in this function. Originally in r147964 by padding all loads narrower than previous loads to the same size. Later modifed to only the last load in r293088. This patch removes that earlier code and just handles it on demand where we know we need it.
Fixes PR46820
Differential Revision: https://reviews.llvm.org/D84463
This adds the llvm.abs(), llvm.umin(), llvm.umax(), llvm.smin(),
and llvm.smax() intrinsics specified in D81829. For SelectionDAG,
the ISD opcodes and all the legalization and lowering already exist,
so this just wires them up to the intrinsic in the SDAG builder and
adds rudimentary tests. For GlobalISel only the min/max intrinsics
are wired up, as llvm.abs() will require the addition of a G_ABS op,
and corresponding legalization support.
Differential Revision: https://reviews.llvm.org/D84125
On systems where size() doesn't return unsigned long, this leads to an
overloading mismatch. Convert the constant to whatever type is used for
Q.size() on the system.
Currently popFromQueueImpl iterates over all candidates to find the best
one. While the candidate queue is small, this is not a problem. But it
becomes a problem once the queue gets larger. For example, the snippet
below takes 330s to compile with llc -O0, but completes in 3s with this
patch.
define void @test(i4000000* %ptr) {
entry:
store i4000000 0, i4000000* %ptr, align 4
ret void
}
This patch limits the number of candidates to check to 1000. This limit
ensures that it never triggers for test-suite/SPEC2000/SPEC2006 on X86
and AArch64 with -O3, while still drastically limiting the compile-time
in case of very large queues.
It would be even better to use a binary heap to manage to queue
(D83335), but some heuristics change the score of a node in the queue
after another node has been scheduled. I plan to address this for
backends that use the MachineScheduler in the future, but that requires
a more careful evaluation. In the meantime, the limit should help users
impacted by this issue.
The patch includes a slightly smaller version of the motivating example
as test case, to guard against the issue.
Reviewers: efriedma, paquette, niravd
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D84328
The AMDGPU handling of f16 vectors is terrible still since it gets
scalarized even when the vector operation is legal.
The code is is essentially duplicated between the non-strict and
strict case. Apparently no other expansions are currently trying to do
this. This is mostly because I found the behavior of
getStrictFPOperationAction to be confusing. In the ARM case, it would
expand strict_fsub even though it shouldn't due to the later check. At
that point, the logic required to check for legality was more complex
than just duplicating the 2 instruction expansion.
This isn't a natively supported operation, so convert it to a
mask+compare.
In addition to the operation itself, fix up some surrounding stuff to
make the testcase work: we need concat_vectors on i1 vectors, we need
legalization of i1 vector truncates, and we need to fix up all the
relevant uses of getVectorNumElements().
Differential Revision: https://reviews.llvm.org/D83811
MBBs are not allowed to have non-terminator instructions after the first
terminator. Currently in some cases (see the modified test),
EmitSchedule can add DBG_VALUEs after the last terminator, for example
when referring a debug value that gets folded into a TCRETURN
instruction on ARM.
This patch updates EmitSchedule to move inserted DBG_VALUEs just before
the first terminator. I am not sure if there are terminators produce
values that can in turn be used by a DBG_VALUE. In that case, moving the
DBG_VALUE might result in referencing an undefined register. But in any
case, it seems like currently there is no way to insert a proper DBG_VALUEs
for such registers anyways.
Alternatively it might make sense to just remove those extra DBG_VALUES.
I am not too familiar with the details of debug info in the backend and
would appreciate any suggestions on how to address the issue in the best
possible way.
Reviewers: vsk, aprantl, jpaquette, efriedma, paquette
Reviewed By: aprantl
Differential Revision: https://reviews.llvm.org/D83561
In an upcoming AMDGPU patch, the scalar cases will be legal and vector
ops should be scalarized, rather than producing a long sequence of
vector ops which will also need to be scalarized.
Use a lazy heuristic that seems to work and improves the thumb2 MVE
test.
When the byref attribute is added, there will need to be two similar
functions for the existing cases which have an associate value copy,
and byref which does not. Most, but not all of the existing uses will
use the existing version.
The associated size function added by D82679 also needs to
contextually differ, and will help eliminate a few places still
relying on pointee element types.
Summary:
This patch modifies IncrementMemoryAddress to use a vscale
when calculating the new address if the data type is scalable.
Also adds tablegen patterns which match an extract_subvector
of a legal predicate type with zip1/zip2 instructions
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: efriedma, david-arm
Subscribers: tschuett, hiraditya, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83137
The operands of a BUILD_VECTOR must all have the same type, so we can hoist this invariant condition out of the loop.
Differential Revision: https://reviews.llvm.org/D83882
Some of the system registers readable on AArch64 and ARM platforms
return different values with each read (for example a timer counter),
these shouldn't be hoisted outside loops or otherwise interfered with,
but the normal @llvm.read_register intrinsic is only considered to read
memory.
This introduces a separate @llvm.read_volatile_register intrinsic and
maps all system-registers on ARM platforms to use it for the
__builtin_arm_rsr calls. Registers declared with asm("r9") or similar
are unaffected.
The existing code already considered this case. Unfortunately a typo in
the condition prevents it from triggering. Also the existing code, had
it run, forgot to do the folding.
This fixes PR42876.
Differential Revision: https://reviews.llvm.org/D65802
ComputeNumSignBits and computeKnownBits both trigger "Scalable flag
may be dropped" warnings when a fixed length vector is extracted
from a scalable vector. This patch assumes nothing about the
demanded elements thus matching the behaviour when extracting a
scalable vector from a scalable vector.
Differential Revision: https://reviews.llvm.org/D83642
In DAGCombiner::TransformFPLoadStorePair we were dropping the scalable
property of TypeSize when trying to create an integer type of equivalent
size. In fact, this optimisation makes no sense for scalable types
since we don't know the size at compile time. I have changed the code
to bail out when encountering scalable type sizes.
I've added a test to
llvm/test/CodeGen/AArch64/sve-fp.ll
that exercises this code path. The test already emits an error if it
encounters warnings due to implicit TypeSize->uint64_t conversions.
Differential Revision: https://reviews.llvm.org/D83572
We have this generic transform in IR (instcombine),
but as shown in PR41098:
http://bugs.llvm.org/PR41098
...the pattern may emerge in codegen too.
x86 has a potential refinement/reversal opportunity here,
but that should come later or needs a target hook to
avoid the transform. Converting to bswap is the more
specific form, so we should use it if it is available.
This carves out an exception for a pair of consecutive loads that are
reversed from the consecutive order of a pair of stores. All of the
existing profitability/legality checks for the memops remain between
the 2 altered hunks of code.
This should give us the same x86 base-case asm that gcc gets in
PR41098 and PR44895:
http://bugs.llvm.org/PR41098http://bugs.llvm.org/PR44895
I think we are missing a potential subsequent conversion to use "movbe"
if the target supports that. That might be similar to what AArch64
would use to get "rev16".
Differential Revision: https://reviews.llvm.org/D83567
This carves out an exception for a pair of consecutive loads that are
reversed from the consecutive order of a pair of stores. All of the
existing profitability/legality checks for the memops remain between
the 2 altered hunks of code.
This should give us the same x86 base-case asm that gcc gets in
PR41098 and PR44895:i
http://bugs.llvm.org/PR41098http://bugs.llvm.org/PR44895
I think we are missing a potential subsequent conversion to use "movbe"
if the target supports that. That might be similar to what AArch64
would use to get "rev16".
Differential Revision:
Summary:
Helper used when splitting load & store operations to calculate
the pointer + offset for the high half of the split
Reviewers: efriedma, sdesmalen, david-arm
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83577
fadd (fma A, B, (fmul C, D)), E --> fma A, B, (fma C, D, E)
This is only allowed when "reassoc" is present on the fadd.
As discussed in D80801, this transform goes beyond
what is allowed by "contract" FMF (-ffp-contract=fast).
That is because we are fusing the trailing add of 'E' with a
multiply, but without "reassoc", the code mandates that the
products A*B and C*D are added together before adding in 'E'.
I've added this example to the LangRef to try to clarify the
meaning of "contract". If that seems reasonable, we should
probably do something similar for the clang docs because
there does not appear to be any formal spec for the behavior
of -ffp-contract=fast.
Differential Revision: https://reviews.llvm.org/D82499
In DAGTypeLegalizer::SetSplitVector I have changed calls in the assert
from getVectorNumElements() to getVectorElementCount(), since this
code path works for both fixed and scalable vectors.
This fixes up one warning in the test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83196
This patch replaces some invalid calls to getVectorNumElements() with calls
to getVectorMinNumElements() instead, since the code paths changed in this
patch work for both fixed and scalable vector types.
Fixes warnings in this test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83203
Summary:
When legalizing a biscast operation from an fp16 operand to an i16 on a
target that requires both input and output types to be promoted to
32-bits, an assertion can fail when building the new node due to a
mismatch between the the operation's result size and the type specified to
the node.
This patches fix the issue by making sure the bit width of the types
match for the FP_TO_FP16 node, covering the difference with an extra
ANYEXTEND operation.
Reviewers: ostannard, efriedma, pirama, jmolloy, plotfi
Reviewed By: efriedma
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82552
This should be a typo introduced in D69275, which may cause an unknown
segment fault in getNode.
Reviewed By: uweigand
Differential Revision: https://reviews.llvm.org/D83376
9cac4e6d1403554b06ec2fc9d834087b1234b695/D32628 intended to eliminate
this, and move all isel pseudo expansion to FinalizeISel. This was a
bad rebase or something, and failed to actually delete this call.
GlobalISel also has a redundant call of finalizeLowering. However, it
requires more work to remove it since it currently triggers a lot of
verifier errors in tests.
It looks like 9cac4e6d14 accidentally
added a second copy of this from a bad rebase or something. This
second copy was added, and the finalizeLowering call was not deleted
as intended.
This removes existing code duplication and allows us to
assert that we are handling the expected cases.
We have a list of outstanding bugs that could benefit by
handling truncated source values, so that's a possible
addition going forward.
ExpandVectorBuildThroughStack is also used for CONCAT_VECTORS.
However, when calculating the offsets for each of the operands we
incorrectly use the element size rather than actual size and thus
the stores overlap.
Differential Revision: https://reviews.llvm.org/D83303
Summary:
The following combine currently breaks in the DAGCombiner:
```
extract_vector_elt (concat_vectors v4i16:a, v4i16:b), x
-> extract_vector_elt a, x
```
This happens because after we have combined these nodes we have inserted nodes
that use individual instances of the vector element type. In the above example
i16. However this isn't a legal type on all backends, and when the combining pass calls
the legalizer it breaks as it expects types to already be legal. The type legalizer has
already been run, and running it again would make a mess of the nodes.
In the example code at least, the generated code is still efficient after the change.
Reviewers: miyuki, arsenm, dmgreen, lebedev.ri
Reviewed By: miyuki, lebedev.ri
Subscribers: lebedev.ri, wdng, hiraditya, steven.zhang, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83231
In DAGTypeLegalizer::SplitVecRes_ExtendOp I have replaced an invalid
call to getVectorNumElements() with a call to getVectorMinNumElements(),
since the code path works for both fixed and scalable vectors.
This fixes up a warning in the following test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83197
Calling getVectorNumElements() is not safe for scalable vectors and we
should normally use getVectorElementCount() instead. However, for the
code changed in this patch I decided to simply move the instantiation of
the variable 'OutNumElems' lower down to the place where only fixed-width
vectors are used, and hence it is safe to call getVectorNumElements().
Fixes up one warning in this test:
sve-sext-zext.ll
Differential Revision: https://reviews.llvm.org/D83195
`__stack_chk_fail` does not return, but `unreachable` was not generated
following `call __stack_chk_fail`. This had a possibility to generate an
invalid binary for functions with a return type, because
`__stack_chk_fail`'s return type is void and `call __stack_chk_fail` can
be the last instruction in the function whose return type is non-void.
Generating `unreachable` after it makes sure CFGStackify's
`fixEndsAtEndOfFunction` handles it correctly.
Reviewed By: tlively
Differential Revision: https://reviews.llvm.org/D83277
This is inspired by D81648. The basic idea is to have the set of SDValues which are lowered as either constants or direct frame references explicit in one place, and to separate them clearly from the spilling logic.
This is not NFC in that the handling of constants larger than > 64 bit has changed. The old lowering would crash on values which could not be encoded as a sign extended 64 bit value. The new lowering just spills all constants > 64 bits. We could be consistent about doing the sext(Con64) optimization, but I happen to know that this code path is utterly unexercised in practice, so simple is better for now.
Summary:
When splitting a store of a scalable type, the new address is
calculated in SplitVecOp_STORE using a vscale and an add instruction.
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: david-arm
Subscribers: tschuett, hiraditya, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D83041
Summary:
When splitting a load of a scalable type, the new address is
calculated in SplitVecRes_LOAD using a vscale and an add instruction.
This patch also adds a DAG combiner fold to visitADD for vscale:
- Fold (add (vscale(C0)), (vscale(C1))) to (add (vscale(C0 + C1)))
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: david-arm
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82792
This patch fixes all remaining warnings in:
llvm/test/CodeGen/AArch64/sve-trunc.ll
llvm/test/CodeGen/AArch64/sve-vector-splat.ll
I hit some warnings related to getCopyPartsToVector. I fixed two
issues:
1. In widenVectorToPartType() we assumed that we'd always be
using BUILD_VECTOR nodes to expand from one vector type to another,
which is incorrect for scalable vector types. I've fixed this for now
by simply bailing out immediately for scalable vectors.
2. In getCopyToPartsVector() I've changed the code to compare
the element counts of different types.
Differential Revision: https://reviews.llvm.org/D83028
X / (fabs(A) * sqrt(Z)) --> X / sqrt(A*A*Z) --> X * rsqrt(A*A*Z)
In the motivating case from PR46406:
https://bugs.llvm.org/show_bug.cgi?id=46406
...this is restoring the sequence that was originally in the source code.
We extracted a term from within the sqrt because we do not know in
instcombine whether a target will expand a sqrt call.
Note: we could say that the transform in IR should be restricted, but
that would not solve the problem if the source was originally in the
pattern shown here.
This is a gray area for fast-math-flag requirements. I think we should at
least check fast-math-flags on the fdiv and fmul because I view this
transform as 2 pieces: reassociate the fmul operands and form reciprocal
from the fdiv (as with the existing transform). We could argue that the
sqrt also needs FMF, but that was not required before, so we should change
that in a follow-up patch if that seems better.
We don't currently have a way to check that the target will produce a sqrt
or recip estimate without actually creating nodes (the APIs are SDValue
getSqrtEstimate() and SDValue getRecipEstimate()), so we clean up
speculatively created nodes if we are not able to create an estimate.
The x86 test with doubles verifies that we are not changing a test with
no estimate sequence.
Differential Revision: https://reviews.llvm.org/D82716
Use a simpler code sequence when the shift amount is known not to be
zero modulo the bit width.
Nothing much uses this until D77152 changes the translation of fshl and
fshr intrinsics.
Differential Revision: https://reviews.llvm.org/D82540
Using a negation instead of a subtraction from a constant can save an
instruction on some targets.
Nothing much uses this until D77152 changes the translation of fshl and
fshr intrinsics.
Differential Revision: https://reviews.llvm.org/D82539
We need to ensure that the sign bits of the result all match
so we can't fold to undef.
Similar to PR46585.
Reviewed By: lebedev.ri
Differential Revision: https://reviews.llvm.org/D83163
zext_vector_inreg needs to produces 0s in the extended bits and
sext_vector_inreg needs to produce upper bits that are all the
same. So we should fold them to a 0 vector instead of undef.
Fixes PR46585.
Currently matchBinOpReduction only handles shufflevector reduction patterns, but in many cases these only occur in the final stages of a reduction, once we're down to legal vector widths.
Before this its likely that we are performing reductions using subvector extractions to repeatedly split the source vector in half and perform the binop on the halves.
Assuming we've found a non-partial reduction, this patch continues looking for subvector reductions as far as it can beyond the last shufflevector.
Fixes PR37890
SelectionDAGBuilder converts logic-of-compares into multiple branches based
on a boolean TLI setting in isJumpExpensive(). But that probably never
considered the pattern of extracted bools from a vector compare - it seems
unlikely that we would want to turn vector logic into control-flow.
The motivating x86 reduction case is shown in PR44565:
https://bugs.llvm.org/show_bug.cgi?id=44565
...and that test shows the expected improvement from using pmovmsk codegen.
For AArch64, I modified the test to include an extra op because the simpler
test gets transformed by a codegen invocation of SimplifyCFG.
Differential Revision: https://reviews.llvm.org/D82602
There was a rogue 'assert' in AArch64ISelLowering for the tuple.get intrinsics,
that shouldn't really have been there (I suspect this was a remnant from when
we expected the wider vector always to have come from a vector CONCAT).
When I tried to create a more minimal reproducer, I found a bug in
DAGCombiner where it drops the scalable flag when trying to fold:
extract_subv (bitcast X), Index --> bitcast (extract_subv X, Index')
This patch fixes both issues.
Reviewers: david-arm, efriedma, spatel
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D82910
Whilst trying to assemble the following test:
clang/test/CodeGen/aarch64-sve-intrinsics/acle_sve_set2.c
I discovered we were hitting some warnings about possible invalid
calls to getVectorNumElements() in getCopyToPartsVector(). I've
tried to fix these by using ElementCount types where possible and
I've made the assumption that we don't support using a fixed width
vector to copy parts of a scalable vector, and vice versa. Looking
at how the copy is implemented I think that's the right thing for
now.
Differential Revision: https://reviews.llvm.org/D82744
The caller can't handle the node having multiple results like a
masked load does. So we need to detect the case and do our own
result replacement.
Fixes PR46532.
In visitSCALAR_TO_VECTOR we try to optimise cases such as:
scalar_to_vector (extract_vector_elt %x)
into vector shuffles of %x. However, it led to numerous warnings
when %x is a scalable vector type, so for now I've changed the
code to only perform the combination on fixed length vectors.
Although we probably could change the code to work with scalable
vectors in certain cases, without a proper profit analysis it
doesn't seem worth it at the moment.
This change fixes up one of the warnings in:
llvm/test/CodeGen/AArch64/sve-merging-stores.ll
I've also added a simplified version of the same test to:
llvm/test/CodeGen/AArch64/sve-fp.ll
which already has checks for no warnings.
Differential Revision: https://reviews.llvm.org/D82872
Before this instruction supported output values, it fit fairly
naturally as a terminator. However, being a terminator while also
supporting outputs causes some trouble, as the physreg->vreg COPY
operations cannot be in the same block.
Modeling it as a non-terminator allows it to be handled the same way
as invoke is handled already.
Most of the changes here were created by auditing all the existing
users of MachineBasicBlock::isEHPad() and
MachineBasicBlock::hasEHPadSuccessor(), and adding calls to
isInlineAsmBrIndirectTarget or mayHaveInlineAsmBr, as appropriate.
Reviewed By: nickdesaulniers, void
Differential Revision: https://reviews.llvm.org/D79794
As per documentation of `hasPairLoad`:
"`RequiredAlignment` gives the minimal alignment constraints that must be met to be able to select this paired load."
In this sense, `0` is strictly equivalent to `1`. We make this obvious by using `Align` instead of unsigned.
There is only one implementor of this interface.
Differential Revision: https://reviews.llvm.org/D82958
It's perfectly valid to do certain DAG combines where we extract
subvectors from a concat vector when we have scalable vector types.
However, we can do this in a way that avoids generating compiler
warnings by replacing calls to getVectorNumElements() with
getVectorMinNumElements(). Due to the way subvector extracts are
designed to work with scalable vector types this is ok.
This eliminates some warnings from existing tests in this file:
llvm/test/CodeGen/AArch64/sve-intrinsics-loads.ll
Differential Revision: https://reviews.llvm.org/D82655
Fix a warning in getNode() when extracting a subvector from a
concat vector. We can simply replace the call to getVectorNumElements
with getVectorMinNumElements as this follows the defined behaviour
for EXTRACT_SUBVECTOR.
Differential Revision: https://reviews.llvm.org/D82746
When trying to reduce a BUILD_VECTOR to a SHUFFLE_VECTOR it's
important that we carefully check the vector types that led to
that BUILD_VECTOR. In the test I have attached to this commit
there is a case where the results of two SVE faddv instructions
are being stored to consecutive memory locations. With my fix,
as part of merging those stores we discover that each BUILD_VECTOR
element came from an extract of a SVE vector element and
therefore bail out.
Differential Revision: https://reviews.llvm.org/D82564
If a constant is only allsignbits in the demanded/active bits, then sign extend it to an allsignbits bool pattern for OR/XOR ops.
This also requires SimplifyDemandedBits XOR handling to be modified to call ShrinkDemandedConstant on any (non-NOT) XOR pattern to account for non-splat cases.
Next step towards fixing PR45808 - with this patch we now get a <-1,-1,0,0> v4i64 constant instead of <1,1,0,0>.
Differential Revision: https://reviews.llvm.org/D82257
Pre-commit for D82257, this adds a DemandedElts arg to ShrinkDemandedConstant/targetShrinkDemandedConstant which will allow future patches to (optionally) add vector support.
reduceBuildVecExtToExtBuildVec was breaking a splat(zext(x)) pattern into buildvector(x, 0, x, 0, ..) resulting in much more complex insert+shuffle codegen.
We already go to some lengths to avoid this in SimplifyDemandedVectorElts etc. when we encounter splat buildvectors.
It should be OK to fold all splat(aext(x)) patterns - we might need to tighten this if we find a case where we mustn't introduce a buildvector(x, undef, x, undef, ..) but I can't find one.
Fixes PR46461.
This lowers intrinsic @llvm.get.active.lane.mask to a setcc node, i.e. an icmp
ule, and creates vectors for its 2 arguments on which the comparison is
performed.
Differential Revision: https://reviews.llvm.org/D82292
Implement them on top of sdiv/udiv, similar to what we do for integer
types.
Potential future work: implementing i8/i16 srem/urem, optimizations for
constant divisors, optimizing the mul+sub to mls.
Differential Revision: https://reviews.llvm.org/D81511
Summary:
This patch adds base support for code generating fixed length
vector operations targeting a known SVE vector length. To achieve
this we lower fixed length vector operations to equivalent scalable
vector operations, whereby SVE predication is used to limit the
elements processed to those present within the fixed length vector.
Specifically this patch implements load and store operations, which
get lowered to their masked counterparts thusly:
V = load(Addr) =>
V = extract_fixed_vector(masked_load(make_pred(V.NumElts), Addr))
store(V, (Addr)) =>
masked_store(insert_fixed_vector(V), make_pred(V.NumElts), Addr))
Reviewers: rengolin, efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80385
Summary:
- AssertAlign node records the guaranteed alignment on its source node,
where these alignments are retrieved from alignment attributes in LLVM
IR. These tracked alignments could help DAG combining and lowering
generating efficient code.
- In this patch, the basic support of AssertAlign node is added. So far,
we only generate AssertAlign nodes on return values from intrinsic
calls.
- Addressing selection in AMDGPU is revised accordingly to capture the
new (base + offset) patterns.
Reviewers: arsenm, bogner
Subscribers: jvesely, wdng, nhaehnle, tpr, hiraditya, kerbowa, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81711
We have many cases where we call SimplifyMultipleUseDemandedBits and demand specific vector elements, but all the bits from them - this adds a helper wrapper to handle this.
For little endian targets, if we only need the lowest element and none of the extended bits then we can just use the (bitcasted) source vector directly.
We already do this in SimplifyDemandedBits, this adds the SimplifyMultipleUseDemandedBits equivalent.
For now I have changed SimplifyDemandedBits and it's various callers
to assume we know nothing for scalable vectors and to ignore the
demanded bits completely. I have also done something similar for
SimplifyDemandedVectorElts. These changes fix up lots of warnings
due to calls to EVT::getVectorNumElements() for types with scalable
vectors. These functions are all used for optimisations, rather than
functional requirements. In future we can revisit this code if
there is a need to improve code quality for SVE.
Differential Revision: https://reviews.llvm.org/D80537
When trying to calculate the number of sign bits for scalable vectors
we should just bail out for now and pretend we know nothing.
Differential Revision: https://reviews.llvm.org/D81093
Summary:
Half-precision floating point arguments and returns are currently
promoted to either float or int32 in clang's CodeGen and there's
no existing support for the lowering of `half` arguments and returns
from IR in AArch32's backend.
Such frontend coercions, implemented as coercion through memory
in clang, can cause a series of issues in argument lowering, as causing
arguments to be stored on the wrong bits on big-endian architectures
and incurring in missing overflow detections in the return of certain
functions.
This patch introduces the handling of half-precision arguments and returns in
the backend using the actual "half" type on the IR. Using the "half"
type the backend is able to properly enforce the AAPCS' directions for
those arguments, making sure they are stored on the proper bits of the
registers and performing the necessary floating point convertions.
Reviewers: rjmccall, olista01, asl, efriedma, ostannard, SjoerdMeijer
Reviewed By: ostannard
Subscribers: stuij, hiraditya, dmgreen, llvm-commits, chill, dnsampaio, danielkiss, kristof.beyls, cfe-commits
Tags: #clang, #llvm
Differential Revision: https://reviews.llvm.org/D75169
Instead of asserting the number of elements is the same, we should be
comparing the element counts instead. In addition, when looking at
concats of extract_subvectors it's fine to use getVectorMinNumElements()
for scalable vectors.
I discovered these warnings when compiling the structured loads tests in
this file:
test/CodeGen/AArch64/sve-intrinsics-loads.ll
Differential Revision: https://reviews.llvm.org/D81936
Current implementation of division estimation isn't correct for some
cases like 1.0/0.0 (result is nan, not expected inf).
And this change exposes a potential infinite loop: we use
isConstOrConstSplatFP in combineRepeatedFPDivisors to look up if the
divisor is some constant. But it doesn't work after legalized on some
platforms. This patch restricts the method to act before LegalDAG.
Reviewed By: spatel
Differential Revision: https://reviews.llvm.org/D80542
Until we have a real need for computing known bits for scalable
vectors I have simply changed the code to bail out for now and
pretend we know nothing. I've also fixed up some simple callers of
computeKnownBits too.
Differential Revision: https://reviews.llvm.org/D80437
If fmul and fadd are separated by an fma, we can fold them together
to save an instruction:
fadd (fma A, B, (fmul C, D)), N1 --> fma(A, B, fma(C, D, N1))
The fold implemented here is actually a specialization - we should
be able to peek through >1 fma to find this pattern. That's another
patch if we want to try that enhancement though.
This transform was guarded by the TLI hook enableAggressiveFMAFusion(),
so it was done for some in-tree targets like PowerPC, but not AArch64
or x86. The hook is protecting against forming a potentially more
expensive computation when fma takes longer to execute than a single
fadd. That hook may be needed for other transforms, but in this case,
we are replacing fmul+fadd with fma, and the fma should never take
longer than the 2 individual instructions.
'contract' FMF is all we need to allow this transform. That flag
corresponds to -ffp-contract=fast in Clang, so we are allowed to form
fma ops freely across expressions.
Differential Revision: https://reviews.llvm.org/D80801
Summary:
The naked function attribute is meant to suppress all function
prologue/epilogue instructions.
On ARM, some are still emitted if an argument greater than 64 bytes in size
(the threshold for using the byval attribute in IR) is passed partially
in registers.
Perform the check for Attribute::Naked and early exit in
SelectionDAGISel::LowerArguments().
Checking in ARMFrameLowering::determineCalleeSaves() is too late.
A test case is included.
Reviewers: llvm-commits, olista01, danielkiss
Reviewed By: danielkiss
Subscribers: kristof.beyls, hiraditya, danielkiss
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80715
Change-Id: Icedecf2a4ad31bc3c35ab0df7489a9d346e1f7cc
Summary:
Note to downstream target maintainers: this might silently change the semantics of your code if you override `TargetLowering::allowsMemoryAccess` without marking it override.
This patch is part of a series to introduce an Alignment type.
See this thread for context: http://lists.llvm.org/pipermail/llvm-dev/2019-July/133851.html
See this patch for the introduction of the type: https://reviews.llvm.org/D64790
Reviewers: courbet
Subscribers: hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D81379
In two instances of CreateStackTemporary we are sometimes promoting
alignments beyond the stack alignment. I have introduced a new function
called getReducedAlign that will return the alignment for the broken
down parts of illegal vector types. For example, on NEON a <32 x i8>
type is made up of two <16 x i8> types - in this case the sensible
alignment is 16 bytes, not 32.
In the legalization code wherever we create stack temporaries I have
started using the reduced alignments instead for illegal vector types.
I added a test to
CodeGen/AArch64/build-one-lane.ll
that tries to insert an element into an illegal fixed vector type
that involves creating a temporary stack object.
Differential Revision: https://reviews.llvm.org/D80370
Just computing the alignment makes sense without caring about the
general known bits, such as for non-integral pointers. Separate the
two and start calling into the TargetLowering hooks for frame indexes.
Start calling the TargetLowering implementation for FrameIndexes,
which improves the AMDGPU matching for stack addressing modes. Also
introduce a new hook for returning known alignment of target
instructions. For AMDGPU, it would be useful to report the known
alignment implied by certain intrinsic calls.
Also stop using MaybeAlign.
This patch updates TargetLoweringBase::computeRegisterProperties and
TargetLoweringBase::getTypeConversion to support scalable vectors,
and make the right calls on how to legalise them. These changes are required
to legalise both MVTs and EVTs.
Reviewers: efriedma, david-arm, ctetreau
Reviewed By: efriedma
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80640
Summary:
This patch adds legalisation of extensions where the operand
of the extend is a legal scalable type but the result is not.
EXTRACT_SUBVECTOR is used to split the result, before
being replaced by target-specific [S|U]UNPK[HI|LO] operations.
For example:
```
zext <vscale x 16 x i8> %a to <vscale x 16 x i16>
```
should emit:
```
uunpklo z2.h, z0.b
uunpkhi z1.h, z0.b
```
Reviewers: sdesmalen, efriedma, david-arm
Reviewed By: efriedma
Subscribers: tschuett, hiraditya, rkruppe, psnobl, huihuiz, cfe-commits, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D79587
This wasn't getting much value from the DAG or depth arguments, since
it's only called on the frame index root nodes. FrameIndexes can also
only return a scalar value, so it also didn't need DemandedElts.
D79003/rG9fa58d1bf2f8 exposed an issue with scalarizeBinOpOfSplats that we were extracting from the splatted vector result instead of the source, the splat index is only valid for the source vector not the result, which may contain undefs, including at the splat index.
This reverts commit 21dadd774f.
In at least PromoteIntBinOps, they wanted to know about users of *all* values
produced by the node not just the integer being promoted. For example not
replacing chain users if the operation was a load breaks the ordering of the
DAG.
Summary:
This patch adds support for dumping .dot
representation of SelectionDAG. It is inspired from the fact that,
a developer may want to just dump the graph at
a predictable path with a simple name to compare.
The exisitng utility (i.e. viewGraph) are overkill
for this motive hence this patch adds the requires support
while using the core routines from GraphWriter.
Example usage: DAG.dumpDotGraph("/tmp/graph.dot", "MyGraph")
will create /tmp/graph.dot file when DAG is an
object of SelectionDAG class.
Reviewed By: arsenm
Differential Revision: https://reviews.llvm.org/D80711
To do so, I had to sink the old school inline operand handling into GCStatepointInst which is non ideal. This code should be removed shortly and I was able to at least clean it up a bunch.
If we're only demanding the (shifted) sign bits of the shift source value, then we can use the value directly.
This handles SimplifyDemandedBits/SimplifyMultipleUseDemandedBits for both ISD::SHL and X86ISD::VSHLI.
Differential Revision: https://reviews.llvm.org/D80869
This patch implements a target independent DAG combine to produce multiply-high
instructions from shifts. This DAG combine will combine shifts for any type as
long as the MULH on the narrow type is legal.
For now, it is enabled on PowerPC as PowerPC is the only target that has an
implementation of the isMulhCheaperThanMulShift TLI hook introduced in
D78271.
Moreover, this DAG combine focuses on catching the pattern:
(shift (mul (ext <narrow_type>:$a to <wide_type>), (ext <narrow_type>:$b to <wide_type>)), <narrow_width>)
to produce mulhs when we have a sign-extend, and mulhu when we have
a zero-extend.
The patch performs the following checks:
- Operation is a right shift arithmetic (sra) or logical (srl)
- Input to the shift is a multiply
- Both operands to the shift are sext/zext nodes
- The extends into the multiply are both the same
- The narrow type is half the width of the wide type
- The shift amount is the width of the narrow type
- The respective mulh operation is legal
Differential Revision: https://reviews.llvm.org/D78272
Do not spill UNDEF GC values. Instead, replace corresponding
gc.relocate intrinsic with an (arbitrary, but recognizable) constant.
Reviewed By: reames
Differential Revision: https://reviews.llvm.org/D80714
The AMDGPU non-strict fdiv lowering needs to introduce an FP mode
switch in some cases, and has custom nodes to provide chain/glue for
the intermediate FP operations. We need to propagate nofpexcept here,
but getNode was dropping the flags.
Adding nofpexcept in the AMDGPU custom lowering is left to a future
patch.
Also fix a second case where flags were dropped, but in this case it
seems it just didn't handle this number of operands.
Test will be included in future AMDGPU patch.
In some cases ScheduleDAGRRList has to add new nodes to resolve problems
with interfering physical registers. When new nodes are added, it
completely re-computes the topological order, which can take a long
time, but is unnecessary. We only add nodes one by one, and initially
they do not have any predecessors. So we can just insert them at the end
of the vector. Later we add predecessors, but the helper function
properly updates the topological order much more efficiently. With this
change, the compile time for the program below drops from 300s to 30s on
my machine.
define i11129 @test1() {
%L1 = load i11129, i11129* undef
%B30 = ashr i11129 %L1, %L1
store i11129 %B30, i11129* undef
ret i11129 %L1
}
This should be generally beneficial, as we can skip a large amount of
work. Theoretically there are some scenarios where we might not safe
much, e.g. when we add a dependency between the first and last node.
Then we would have to shift all nodes. But we still do not have to spend
the time re-computing the initial order.
Reviewers: MatzeB, atrick, efriedma, niravd, paquette
Reviewed By: paquette
Differential Revision: https://reviews.llvm.org/D59722
This code was repeated in two callers of CommitTargetLoweringOpt.
But CommitTargetLoweringOpt is also called from TargetLowering.
We should print a message for those calls to. So sink the
repeated code into CommitTargetLoweringOpt to catch those calls.
We are calling getValidShiftAmountConstant first followed by getValidMinimumShiftAmountConstant/getValidMaximumShiftAmountConstant if that failed. But both are used in the same way in ComputeNumSignBits and the Min/Max variants call getValidShiftAmountConstant internally anyhow.
Summary:
This caused incorrect debug information for parameters:
Previously, after a COPY of a parameter that changes the width,
we would emit a DBG_VALUE that continues to be associated to that
parameter, even though it now used a different width.
This made the LiveDebugValues pass assume the parameter value
got clobbered and it stopped tracking the parameter entry
value, leading to incorrect debug information.
Fixes https://bugs.llvm.org/show_bug.cgi?id=39715
Subscribers: aprantl, hiraditya, llvm-commits
Tags: #llvm
Differential Revision: https://reviews.llvm.org/D80819
Let the codegen recognized the nomerge attribute and disable branch folding when the attribute is given
Differential Revision: https://reviews.llvm.org/D79537
optimizations
As discussed in the thread http://lists.llvm.org/pipermail/llvm-dev/2020-May/141838.html,
some bit field access width can be reduced by ReduceLoadOpStoreWidth, some
can't. If two accesses are very close, and the first access width is reduced,
the second is not. Then the wide load of second access will be stalled for long
time.
This patch add command line options to guard ReduceLoadOpStoreWidth and
ShrinkLoadReplaceStoreWithStore, so users can use them to disable these
store width reduction optimizations.
Differential Revision: https://reviews.llvm.org/D80745
Thomas Preud'homme