the old one around for comparative purposes: have the
ENABLE_NEW_ISEL #define (which is not enabled on mainline) stop
emitting the old isel at all, yay for build time win.
llvm-svn: 97033
the new isel: fold movechild+record+moveparent into a
single recordchild N node. This shrinks the X86 table
from 125443 to 117502 bytes.
llvm-svn: 97031
the point where it is to the 95% feature complete mark, it just
needs result updating to be done (then testing, optimization
etc).
More specificallly, this adds support for chain and flag handling
on the result nodes, support for sdnodexforms, support for variadic
nodes, memrefs, pinned physreg inputs, and probably lots of other
stuff.
In the old DAGISelEmitter, this deletes the dead code related to
OperatorMap, cleans up a variety of dead stuff handling "implicit
remapping" from things like globaladdr -> targetglobaladdr (which
is no longer used because globaladdr always needs to be legalized),
and some minor formatting fixes.
llvm-svn: 96716
into a roundss intrinsic, producing a cyclic dag. The root cause
of this is badness handling ComplexPattern nodes in the old dagisel
that I noticed through inspection. Eliminate a copy of the of the
code that handled ComplexPatterns by making EmitChildMatchCode call
into EmitMatchCode.
llvm-svn: 96408
with chains. On interior nodes that lead up to them, we just directly
check that there is a single use. This generates slightly more
efficient code.
llvm-svn: 96366
IsLegalToFold and IsProfitableToFold. The generic version of the later simply checks whether the folding candidate has a single use.
This allows the target isel routines more flexibility in deciding whether folding makes sense. The specific case we are interested in is folding constant pool loads with multiple uses.
llvm-svn: 96255
produce a table based matcher instead of gobs of C++ Code.
Though it's not done yet, the shrinkage seems promising,
the table for the X86 ISel is 75K and still has a lot of
optimization to come (compare to the ~1.5M of .o generated
the old way, much of which will go away).
The code is currently disabled by default (the #if 0 in
DAGISelEmitter.cpp). When enabled it generates a dead
SelectCode2 function in the DAGISel Header which will
eventually replace SelectCode.
There is still a lot of stuff left to do, which are
documented with a trail of FIXMEs.
llvm-svn: 96215
that predated -fast-isel which attempted to speed up the dag pattern
matchers at -O0. Since fast-isel is around, this is basically
obsolete and removing it shrinks the generated dag isels.
llvm-svn: 96188
clear what information these functions are actually using.
This is also a micro-optimization, as passing a SDNode * around is
simpler than passing a { SDNode *, int } by value or reference.
llvm-svn: 92564
Note that "hasDotLocAndDotFile"-style debug info was already broken;
people wanting this functionality should implement it in the
AsmPrinter/DwarfWriter code.
llvm-svn: 89711
bunch of associated comments, because it doesn't have anything to do
with DAGs or scheduling. This is another step in decoupling MachineInstr
emitting from scheduling.
llvm-svn: 85517
- Allocate MachineMemOperands and MachineMemOperand lists in MachineFunctions.
This eliminates MachineInstr's std::list member and allows the data to be
created by isel and live for the remainder of codegen, avoiding a lot of
copying and unnecessary translation. This also shrinks MemSDNode.
- Delete MemOperandSDNode. Introduce MachineSDNode which has dedicated
fields for MachineMemOperands.
- Change MemSDNode to have a MachineMemOperand member instead of its own
fields with the same information. This introduces some redundancy, but
it's more consistent with what MachineInstr will eventually want.
- Ignore alignment when searching for redundant loads for CSE, but remember
the greatest alignment.
Target-specific code which previously used MemOperandSDNodes with generic
SDNodes now use MemIntrinsicSDNodes, with opcodes in a designated range
so that the SelectionDAG framework knows that MachineMemOperand information
is available.
llvm-svn: 82794
naming scheme used in SelectionDAG, where there are multiple kinds
of "target" nodes, but "machine" nodes are nodes which represent
a MachineInstr.
llvm-svn: 82790
ADDC/ADDE use MVT::i1 (later, whatever it gets legalized to)
instead of MVT::Flag. Remove CARRY_FALSE in favor of 0; adjust
all target-independent code to use this format.
Most targets will still produce a Flag-setting target-dependent
version when selection is done. X86 is converted to use i32
instead, which means TableGen needs to produce different code
in xxxGenDAGISel.inc. This keys off the new supportsHasI1 bit
in xxxInstrInfo, currently set only for X86; in principle this
is temporary and should go away when all other targets have
been converted. All relevant X86 instruction patterns are
modified to represent setting and using EFLAGS explicitly. The
same can be done on other targets.
The immediate behavior change is that an ADC/ADD pair are no
longer tightly coupled in the X86 scheduler; they can be
separated by instructions that don't clobber the flags (MOV).
I will soon add some peephole optimizations based on using
other instructions that set the flags to feed into ADC.
llvm-svn: 72707
Massive check in. This changes the "-fast" flag to "-O#" in llc. If you want to
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'll change the JIT with a follow-up patch.
llvm-svn: 70343
use the old behavior, the flag is -O0. This change allows for finer-grained
control over which optimizations are run at different -O levels.
Most of this work was pretty mechanical. The majority of the fixes came from
verifying that a "fast" variable wasn't used anymore. The JIT still uses a
"Fast" flag. I'm not 100% sure if it's necessary to change it there...
llvm-svn: 70270
This will be used to replace things like X86's MOV32to32_.
Enhance ScheduleDAGSDNodesEmit to be more flexible and robust
in the presense of subregister superclasses and subclasses. It
can now cope with the definition of a virtual register being in
a subclass of a use.
Re-introduce the code for recording register superreg classes and
subreg classes. This is needed because when subreg extracts and
inserts get coalesced away, the virtual registers are left in
the correct subclass.
llvm-svn: 68961
register classes. Before, MVT::Other would be returned anytime a reg was
in multiple register classes. Now, MVT::Other is only returned if the types
for those register classes differ.
llvm-svn: 67714
- Modify TableGen to add the DebugLoc when calling getTargetNode.
(The light-weight wrappers are only temporary. The non-DebugLoc version will be
removed once the whole debug info stuff is finished with.)
llvm-svn: 63273
is set but mayLoad is not set. Fix all the problems this turned up.
Change code to not use isSimpleLoad instead of mayLoad unless it
really wants isSimpleLoad.
llvm-svn: 60459
priority function. Instead, just iterate over the AllNodes list, which is
already in topological order. This eliminates a fair amount of bookkeeping,
and speeds up the isel phase by about 15% on many testcases.
The impact on most targets is that AddToISelQueue calls can be simply removed.
In the x86 target, there are two additional notable changes.
The rule-bending AND+SHIFT optimization in MatchAddress that creates new
pre-isel nodes during isel is now a little more verbose, but more robust.
Instead of either creating an invalid DAG or creating an invalid topological
sort, as it has historically done, it can now just insert the new nodes into
the node list at a position where they will be consistent with the topological
ordering.
Also, the address-matching code has logic that checked to see if a node was
"already selected". However, when a node is selected, it has all its uses
taken away via ReplaceAllUsesWith or equivalent, so it won't recieve any
further visits from MatchAddress. This code is now removed.
llvm-svn: 58748
flag. Then in a debugger developers can set breakpoints at these calls
to see waht is about to be selected and what the resulting subgraph
looks like. This really helps when debugging instruction selection.
llvm-svn: 58278
use a SUB instruction instead of an ADD, because -128 can be
encoded in an 8-bit signed immediate field, while +128 can't be.
This avoids the need for a 32-bit immediate field in this case.
A similar optimization applies to 64-bit adds with 0x80000000,
with the 32-bit signed immediate field.
To support this, teach tablegen how to handle 64-bit constants.
llvm-svn: 57663
This will allow predicates to be composed, which will allow the
predicate definitions to become less redundant, and eventually
will allow DAGISelEmitter.cpp to emit less redundant code.
llvm-svn: 57562
helper functions instead of duplicating it inline each time
it is needed. This eliminates a few hundred or so copies
of this code in each target.
llvm-svn: 56759
- Add linkage to SymbolSDNode (default to external).
- Change ISD::ExternalSymbol to ISD::Symbol.
- Change ISD::TargetExternalSymbol to ISD::TargetSymbol
These changes pave the way to allowing SymbolSDNodes with non-external linkage.
llvm-svn: 56249
ConstantFP* instead of APInt and APFloat directly.
This reduces the amount of time to create ConstantSDNode
and ConstantFPSDNode nodes when ConstantInt* and ConstantFP*
respectively are already available, as is the case in
SelectionDAGBuild.cpp. Also, it reduces the amount of time
to legalize constants into constant pools, and the amount of
time to add ConstantFP operands to MachineInstrs, due to
eliminating ConstantInt::get and ConstantFP::get calls.
It increases the amount of work needed to create new constants
in cases where the client doesn't already have a ConstantInt*
or ConstantFP*, such as legalize expanding 64-bit integer constants
to 32-bit constants. And it adds a layer of indirection for the
accessor methods. But these appear to be outweight by the benefits
in most cases.
It will also make it easier to make ConstantSDNode and
ConstantFPNode more consistent with ConstantInt and ConstantFP.
llvm-svn: 56162
process up to a higher level. This allows FastISel to leverage
more of SelectionDAGISel's infastructure, such as updating Machine
PHI nodes.
Also, implement transitioning from SDISel back to FastISel in
the middle of a block, so it's now possible to go back and
forth. This allows FastISel to hand individual CallInsts and other
complicated things off to SDISel to handle, while handling the rest
of the block itself.
To help support this, reorganize the SelectionDAG class so that it
is allocated once and reused throughout a function, instead of
being completely reallocated for each block.
llvm-svn: 55219
and use it in FastISelEmitter.cpp, and make FastISel
subtarget aware. Among other things, this lets it work
properly on x86 targets that don't have SSE, where it
successfully selects x87 instructions.
llvm-svn: 55156
to different address spaces. This alters the naming scheme for those
intrinsics, e.g., atomic.load.add.i32 => atomic.load.add.i32.p0i32
llvm-svn: 54195
replacement of multiple values. This is slightly more efficient
than doing multiple ReplaceAllUsesOfValueWith calls, and theoretically
could be optimized even further. However, an important property of this
new function is that it handles the case where the source value set and
destination value set overlap. This makes it feasible for isel to use
SelectNodeTo in many very common cases, which is advantageous because
SelectNodeTo avoids a temporary node and it doesn't require CSEMap
updates for users of values that don't change position.
Revamp MorphNodeTo, which is what does all the work of SelectNodeTo, to
handle operand lists more efficiently, and to correctly handle a number
of corner cases to which its new wider use exposes it.
This commit also includes a change to the encoding of post-isel opcodes
in SDNodes; now instead of being sandwiched between the target-independent
pre-isel opcodes and the target-dependent pre-isel opcodes, post-isel
opcodes are now represented as negative values. This makes it possible
to test if an opcode is pre-isel or post-isel without having to know
the size of the current target's post-isel instruction set.
These changes speed up llc overall by 3% and reduce memory usage by 10%
on the InstructionCombining.cpp testcase with -fast and -regalloc=local.
llvm-svn: 53728
getTargetNode and SelectNodeTo to reduce duplication, and to
make some of the getTargetNode code available to SelectNodeTo.
Use SelectNodeTo instead of getTargetNode in several new
interesting cases, as it mutates nodes in place instead of
creating new ones.
This triggers some scheduling behavior differences due to nodes
being presented to the scheduler in a different order. Some of the
arbitrary scheduling decisions it makes are now arbitrarily made
differently. This is visible in CodeGen/PowerPC/LargeAbsoluteAddr.ll,
where a trivial scheduling difference led to a trivial register
allocation difference.
llvm-svn: 53203
Chris Lattner