D104868 removed an (incorrect) fold for distributing BFI instructions in
a chain, combining them into a single instruction. BFIs like that are
hard to test, as the patterns are often destroyed before they become
BFIs. But it can come up in places, with chains of BFIs that can be
combined.
This patch adds a replacement, which reassociates BFI instructions with
non-overlapping insertion masks so that low bits are inserted first.
This can end up sorting the nodes so that adjacent inserts are next to
one another, allowing the existing folds to combine into a single BFI.
Differential Revision: https://reviews.llvm.org/D105096
This adds a small fold for extract (ARM_BUILD_VECTOR) to fold to the
original node. This can help simplify the resulting codegen in some
cases.
Differential Revision: https://reviews.llvm.org/D104860
This adds another small fold for extract of a vdup, between a i32 and a
f32, converting to a BITCAST. This allows some extra folding to happen,
simplifying the resulting code.
Differential Revision: https://reviews.llvm.org/D104857
The MVETRUNC node truncates two wide vectors to a single vector with
narrower elements. This is usually lowered to a series of extract/insert
elements, going via GPR registers. This patch changes that to instead
use a pair of truncating stores and a stack reload. This cuts down the
number of instructions at the expense of some stack space.
Differential Revision: https://reviews.llvm.org/D104515
Currently, when encountering store(trunc(..)) where the trunc is double
a legal vector lenth in MVE, we spilt the node into two different stores
each performing half of the trunc from the wider type. This works well
for efficiently lowering wider than legal types, else the trunc becomes
a series of individual lane moves. Unfortunately this splitting is
currently one of the first combines attempted, so can happen before any
other combines which might be more preferable.
This patch instead introduces the concept of a MVETRUNC ISel node that
the trunk is initially lowered to, to keep it intact as a single item as
opposed to splitting it up. This allows us to push the store(trunc(..))
combine later, allowing other optimisations to potentially happen on the
trunc first. The store(trunc(..)) splitting can then be done later in
the legalisation period if needed, or else fall back to a buildvector as
before.
This can also be used in the future to lower to loads/stores, as opposed
to the more expensive lane extracts/inserts. Some extra combines are
added to keep all the existing tests happy.
Differential Revision: https://reviews.llvm.org/D91921
For a bfi chain like:
a = bfi input, x, y
b = bfi a, x', y'
The previous code was RAUW'ing a with x, mutating the second 'b' bfi, and when
SelectionDAG's CSE code ended up deleting it unexpectedly, bad things happend.
There's no need to RAUW in this case because we can just return our newly
created replacement BFI node. It also looked incorrect because it didn't account
for other users of the 'a' bfi.
Since it seems that chains of more than 2 BFI nodes are hard/impossible to
produce without this combine kicking in at some point, I've removed that
functionality since it had no test coverage.
rdar://79095399
Differential Revision: https://reviews.llvm.org/D104868
This is a mechanical change. This actually also renames the
similarly named methods in the SmallString class, however these
methods don't seem to be used outside of the llvm subproject, so
this doesn't break building of the rest of the monorepo.
Since this method can apply to cmpxchg operations, make sure it's clear
what value we're actually retrieving. This will help ensure we don't
accidentally ignore the failure ordering of cmpxchg in the future.
We could potentially introduce a getOrdering() method on AtomicSDNode
that asserts the operation isn't cmpxchg, but not sure that's
worthwhile.
Differential Revision: https://reviews.llvm.org/D103338
This only applies to FastIsel. GlobalIsel seems to sidestep
the issue.
This fixes https://bugs.llvm.org/show_bug.cgi?id=46996
One of the things we do in llvm is decide if a type needs
consecutive registers. Previously, we just checked if it
was an array or not.
(plus an SVE specific check that is not changing here)
This causes some confusion when you arbitrary IR like:
```
%T1 = type { double, i1 };
define [ 1 x %T1 ] @foo() {
entry:
ret [ 1 x %T1 ] zeroinitializer
}
```
We see it is an array so we call CC_AArch64_Custom_Block
which bails out when it sees the i1, a type we don't want
to put into a block.
This leaves the location of the double in some kind of
intermediate state and leads to odd codegen. Which then crashes
the backend because it doesn't know how to implement
what it's been asked for.
You get this:
```
renamable $d0 = FMOVD0
$w0 = COPY killed renamable $d0
```
Rather than this:
```
$d0 = FMOVD0
$w0 = COPY $wzr
```
The backend knows how to copy 64 bit to 64 bit registers,
but not 64 to 32. It can certainly be taught how but the real
issue seems to be us even trying to assign a register block
in the first place.
This change makes the logic of
AArch64TargetLowering::functionArgumentNeedsConsecutiveRegisters
a bit more in depth. If we find an array, also check that all the
nested aggregates in that array have a single member type.
Then CC_AArch64_Custom_Block's assumption of a type that looks
like [ N x type ] will be valid and we get the expected codegen.
New tests have been added to exercise these situations. Note that
some of the output is not ABI compliant. The aim of this change is
to simply handle these situations and not to make our processing
of arbitrary IR ABI compliant.
Reviewed By: efriedma
Differential Revision: https://reviews.llvm.org/D104123
Under MVE v4f32 and v8f16 vectors should be using v4i1/v8i1 predicates
for the setcc result type, as they have predicated registers for those
types. Setting this correctly prevents some inefficient optimizations
from happening.
Re-applying this patch after bots failures. Should be fine now.
The function __multi3() is undefined on 32-bit ARM, so a call to it should
never be emitted. Instead, plain instructions need to be generated to
perform 128-bit multiplications.
Differential Revision: https://reviews.llvm.org/D103906
The function __multi3() is undefined on 32-bit ARM, so a call to it
should never be emitted. Instead, plain instructions need to be
generated to perform 128-bit multiplications.
Differential Revision: https://reviews.llvm.org/D103906
If we cannot otherwise use a VMOVimm/VMOVFPimm/VMVNimm, fall back to
producing a VDUP(const) as opposed to a constant pool load. This will at
least be smaller codesize and can allow the VDUP to be folded into other
instructions.
Differential Revision: https://reviews.llvm.org/D103808
Don't require a specific kind of IRBuilder for TargetLowering hooks.
This allows us to drop the IRBuilder.h include from TargetLowering.h.
Differential Revision: https://reviews.llvm.org/D103759
SwiftTailCC has a different set of requirements than the C calling convention
for a tail call. The exact argument sequence doesn't have to match, but fewer
ABI-affecting attributes are allowed.
Also make sure the musttail diagnostic triggers if a musttail call isn't
actually a tail call.
Now that vmulh can be selected, this adds the MVE patterns to make it
legal and generate instructions.
Differential Revision: https://reviews.llvm.org/D88011
This makes sure that the blocks created for lowering memcpy to loops end
up with branches, even if they fall through to the successor. Otherwise
IfCvt is getting confused with unanalyzable branches and creating
invalid block layouts.
The extra branches should be removed as the tail predicated loop is
finalized in almost all cases.
The trip count for a memcpy/memset will be n/16 rounded up to the
nearest integer. So (n+15)>>4. The old code was including a BIC too, to
clear one of the bits, which does not seem correct. This remove the
extra BIC.
Note that ideally this would never actually be generated, as in the
creation of a tail predicated loop we will DCE that setup code, letting
the WLSTP perform the trip count calculation. So this doesn't usually
come up in testing (and apparently the ARMLowOverheadLoops pass does not
do any sort of validation on the tripcount). Only if the generation of
the WLTP fails will it use the incorrect BIC instructions.
Differential Revision: https://reviews.llvm.org/D102629
Swift's new concurrency features are going to require guaranteed tail calls so
that they don't consume excessive amounts of stack space. This would normally
mean "tailcc", but there are also Swift-specific ABI desires that don't
naturally go along with "tailcc" so this adds another calling convention that's
the combination of "swiftcc" and "tailcc".
Support is added for AArch64 and X86 for now.
These pseudos are converted post-isel into t2WhileLoopStart and
t2LoopEnd/LoopDec instructions, which themselves are defined to clobber
CPSR. Doing the same with the MEMCPY nodes will make sure they are
scheduled correctly to not end up with incorrect uses.
Based on the same for AArch64: 4751cadcca
At -O0, the fast register allocator may insert spills between the ldrex and
strex instructions inserted by AtomicExpandPass when expanding atomicrmw
instructions in LL/SC loops. To avoid this, expand to cmpxchg loops and
therefore expand the cmpxchg pseudos after register allocation.
Required a tweak to ARMExpandPseudo::ExpandCMP_SWAP to use the 4-byte encoding
of UXT, since the pseudo instruction can be allocated a high register (R8-R15)
which the 2-byte encoding doesn't support. However, the 4-byte encodings
are not present for ARM v8-M Baseline. To enable this, two new pseudos are
added for Thumb which are only valid for v8mbase, tCMP_SWAP_8 and
tCMP_SWAP_16.
The previously committed attempt in D101164 had to be reverted due to runtime
failures in the test suites. Rather than spending time fixing that
implementation (adding another implementation of atomic operations and more
divergence between backends) I have chosen to follow the approach taken in
D101163.
Differential Revision: https://reviews.llvm.org/D101898
Depends on D101912
This patch converts llvm.memset intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
The llvm.memset is converted to a TP loop for both
constant and non-constant input sizes (of llvm.memset).
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D100435
This patch converts llvm.memcpy intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
From an implementation point of view, the patch
- adds an ARM specific SDAG Node (to which the llvm.memcpy intrinsic is lowered to, during first phase of ISel)
- adds a corresponding TableGen entry to generate a pseudo instruction, with a custom inserter,
on matching the above node.
- Adds a custom inserter function that expands the pseudo instruction into MIR suitable
to be (by later passes) into a WLSTP loop.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99723
This patch converts llvm.memcpy intrinsic into Tail Predicated
Hardware loops for a target that supports the Arm M-profile
Vector Extension (MVE).
From an implementation point of view, the patch
- adds an ARM specific SDAG Node (to which the llvm.memcpy intrinsic is lowered to, during first phase of ISel)
- adds a corresponding TableGen entry to generate a pseudo instruction, with a custom inserter,
on matching the above node.
- Adds a custom inserter function that expands the pseudo instruction into MIR suitable
to be (by later passes) into a WLSTP loop.
Note: A cli option is used to control the conversion of memcpy to TP
loop and this option is currently disabled by default. It may be enabled
in the future after further downstream testing.
Reviewed By: dmgreen
Differential Revision: https://reviews.llvm.org/D99723
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Originally submitted as 3338290c18.
Reverted in c7df6b1223.
Similarly to D101096, this makes sure that MMO operands get propagated
through from MVE gathers/scatters to the Machine Instructions. This
allows extra scheduling freedom, not forcing the instructions to act as
scheduling barriers. We create MMO's with an unknown size, specifying
that they can load from anywhere in memory, similar to the masked_gather
or X86 intrinsics.
Differential Revision: https://reviews.llvm.org/D101219
atomicrmw instructions are expanded by AtomicExpandPass before register allocation
into cmpxchg loops. Register allocation can insert spills between the exclusive loads
and stores, which invalidates the exclusive monitor and can lead to infinite loops.
To avoid this, reimplement atomicrmw operations as pseudo-instructions and expand them
after register allocation.
Floating point legalisation:
f16 ATOMIC_LOAD_FADD(*f16, f16) is legalised to
f32 ATOMIC_LOAD_FADD(*i16, f32) and then eventually
f32 ATOMIC_LOAD_FADD_16(*i16, f32)
Differential Revision: https://reviews.llvm.org/D101164
Otherwise the CMP glue may be used in multiple nodes, needing to be
emitted multiple times. Currently this either increases instruction
count or fails as it attempt to insert the same node multiple times.
This adds a pattern to recognize VIDUP from BUILD_VECTOR of incrementing
adds. This can come up from either geps or adds, and came up recently in
D100550. We are just looking for a BUILD_VECTOR where each lane is an
add of the first lane with N*i, where i is the lane and N is one of 1,
2, 4, or 8, supported by the VIDUP instruction.
Differential Revision: https://reviews.llvm.org/D101263
This expands the VMOVRRD(extract(..(build_vector(a, b, c, d)))) pattern,
to also handle insert_vectors. Providing we can find the correct insert,
this helps further simplify patterns by removing the redundant VMOVRRD.
Differential Revision: https://reviews.llvm.org/D100245
This clang-formats the list of ARMISD nodes. Usually this is something I
would avoid, but these cause problems with formatting every time new
nodes are added.
The list in getTargetNodeName also makes use of MAKE_CASE macros, as
other backends do.
The generic SoftFloatVectorExtract.ll test was failing when run on arm
machines, as it tries to create a f64 under soft float. Limit the
transform to when f64 is legal.
Also add a missing override, as reported in D100244.
This adds a combine for extract(x, n); extract(x, n+1) ->
VMOVRRD(extract x, n/2). This allows two vector lanes to be moved at the
same time in a single instruction, and thanks to the other VMOVRRD folds
we have added recently can help reduce the amount of executed
instructions. Floating point types are very similar, but will include a
bitcast to an integer type.
This also adds a shouldRewriteCopySrc, to prevent copy propagation from
DPR to SPR, which can break as not all DPR regs can be extracted from
directly. Otherwise the machine verifier is unhappy.
Differential Revision: https://reviews.llvm.org/D100244
Combine sub 0, csinc X, Y, CC to csinv -X, Y, CC providing that the
negation of X is cheap, currently just handling constants. This comes up
during the splat of an i1 to a predicate, where we now generate csetm,
as opposed to cset; rsb.
Differential Revision: https://reviews.llvm.org/D99940
Daniel Egger