When we fill the shape to tile configure memory, the shape is gotten
from AMX pseudo instruction. However the register for the shape may be
split or spilled by greedy RA. That cause we fill the shape to config
memory after ldtilecfg is executed, so that the shape configuration
would be wrong.
This patch is to split the tile register allocation from greedy register
allocation, so that after tile registers are allocated the shape
registers are still virtual register. The shape register only may be
redefined or multi-defined by phi elimination pass, two address pass.
That doesn't affect tile register configuration.
Differential Revision: https://reviews.llvm.org/D128584
This relands commit 4d8d2580c5.
The major change here is using 'addUsedIfAvailable<BasicBlockSectionsProfileReader>()` to make sure we don't change the pipeline tests.
Differential Revision: https://reviews.llvm.org/D126518
Today, text section prefixes (none, .unlikely, .hot, and .unkown) are determined based on PGO profile. However, Propeller may deem a function hot when PGO doesn't. Besides, when `-Wl,-keep-text-section-prefix=true` Propeller cannot enforce a global section ordering as the linker can only reorder sections within each output section (.text, .text.hot, .text.unlikely).
This patch promotes all functions with Propeller profiles (functions listed in the basic-block-sections profile) to .text.hot. The feature is hidden behind the flag `--bbsections-guided-section-prefix` which defaults to `true`.
The new implementation refactors the parsing of basic block sections profile into a new `BasicBlockSectionsProfileReader` analysis pass. This allows us to use the information earlier in `CodeGenPrepare` in order to set the functions text prefix. `BasicBlockSectionsProfileReader` will be used both by `BasicBlockSections` pass and `CodeGenPrepare`.
Differential Revision: https://reviews.llvm.org/D122930
This is the first commit for the cmov-vs-branch optimization pass.
The goal is to develop a new profile-guided and target-independent cost/benefit analysis
for selecting conditional moves over branches when optimizing for performance.
Initially, this new pass is expected to be enabled only for instrumentation-based PGO.
RFC: https://discourse.llvm.org/t/rfc-cmov-vs-branch-optimization/6040
Reviewed By: tejohnson
Differential Revision: https://reviews.llvm.org/D120230
This pass inserts the necessary CFI instructions to compensate for the
inconsistency of the call-frame information caused by linear (non-CGA
aware) nature of the unwind tables.
Unlike the `CFIInstrInserer` pass, this one almost always emits only
`.cfi_remember_state`/`.cfi_restore_state`, which results in smaller
unwind tables and also transparently handles custom unwind info
extensions like CFA offset adjustement and save locations of SVE
registers.
This pass takes advantage of the constraints taht LLVM imposes on the
placement of save/restore points (cf. `ShrinkWrap.cpp`):
* there is a single basic block, containing the function prologue
* possibly multiple epilogue blocks, where each epilogue block is
complete and self-contained, i.e. CSR restore instructions (and the
corresponding CFI instructions are not split across two or more
blocks.
* prologue and epilogue blocks are outside of any loops
Thus, during execution, at the beginning and at the end of each basic
block the function can be in one of two states:
- "has a call frame", if the function has executed the prologue, or
has not executed any epilogue
- "does not have a call frame", if the function has not executed the
prologue, or has executed an epilogue
These properties can be computed for each basic block by a single RPO
traversal.
From the point of view of the unwind tables, the "has/does not have
call frame" state at beginning of each block is determined by the
state at the end of the previous block, in layout order.
Where these states differ, we insert compensating CFI instructions,
which come in two flavours:
- CFI instructions, which reset the unwind table state to the
initial one. This is done by a target specific hook and is
expected to be trivial to implement, for example it could be:
```
.cfi_def_cfa <sp>, 0
.cfi_same_value <rN>
.cfi_same_value <rN-1>
...
```
where `<rN>` are the callee-saved registers.
- CFI instructions, which reset the unwind table state to the one
created by the function prologue. These are the sequence:
```
.cfi_restore_state
.cfi_remember_state
```
In this case we also insert a `.cfi_remember_state` after the
last CFI instruction in the function prologue.
Reviewed By: MaskRay, danielkiss, chill
Differential Revision: https://reviews.llvm.org/D114545
This pass inserts the necessary CFI instructions to compensate for the
inconsistency of the call-frame information caused by linear (non-CFG
aware) nature of the unwind tables.
Unlike the `CFIInstrInserer` pass, this one almost always emits only
`.cfi_remember_state`/`.cfi_restore_state`, which results in smaller
unwind tables and also transparently handles custom unwind info
extensions like CFA offset adjustement and save locations of SVE
registers.
This pass takes advantage of the constraints that LLVM imposes on the
placement of save/restore points (cf. `ShrinkWrap.cpp`):
* there is a single basic block, containing the function prologue
* possibly multiple epilogue blocks, where each epilogue block is
complete and self-contained, i.e. CSR restore instructions (and the
corresponding CFI instructions are not split across two or more
blocks.
* prologue and epilogue blocks are outside of any loops
Thus, during execution, at the beginning and at the end of each basic
block the function can be in one of two states:
- "has a call frame", if the function has executed the prologue, or
has not executed any epilogue
- "does not have a call frame", if the function has not executed the
prologue, or has executed an epilogue
These properties can be computed for each basic block by a single RPO
traversal.
In order to accommodate backends which do not generate unwind info in
epilogues we compute an additional property "strong no call frame on
entry" which is set for the entry point of the function and for every
block reachable from the entry along a path that does not execute the
prologue. If this property holds, it takes precedence over the "has a
call frame" property.
From the point of view of the unwind tables, the "has/does not have
call frame" state at beginning of each block is determined by the
state at the end of the previous block, in layout order.
Where these states differ, we insert compensating CFI instructions,
which come in two flavours:
- CFI instructions, which reset the unwind table state to the
initial one. This is done by a target specific hook and is
expected to be trivial to implement, for example it could be:
```
.cfi_def_cfa <sp>, 0
.cfi_same_value <rN>
.cfi_same_value <rN-1>
...
```
where `<rN>` are the callee-saved registers.
- CFI instructions, which reset the unwind table state to the one
created by the function prologue. These are the sequence:
```
.cfi_restore_state
.cfi_remember_state
```
In this case we also insert a `.cfi_remember_state` after the
last CFI instruction in the function prologue.
Reviewed By: MaskRay, danielkiss, chill
Differential Revision: https://reviews.llvm.org/D114545
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121736
For MachO, lower `@llvm.global_dtors` into `@llvm_global_ctors` with
`__cxa_atexit` calls to avoid emitting the deprecated `__mod_term_func`.
Reuse the existing `WebAssemblyLowerGlobalDtors.cpp` to accomplish this.
Enable fallback to the old behavior via Clang driver flag
(`-fregister-global-dtors-with-atexit`) or llc / code generation flag
(`-lower-global-dtors-via-cxa-atexit`). This escape hatch will be
removed in the future.
Differential Revision: https://reviews.llvm.org/D121327
FSAFDO profile loader is currently disabled even --enable-fs-discriminator is enabled.
They need to be turned on by options which makes it cumbersome for experiments.
This patch changes the FSAFDO profile loader enabled by default. Since they are
guarded by EnableFSDiscriminator, they will only be turned on if
--enable-fs-discriminator is enabled. Note that --enable-fs-discriminator is
still disabled by default.
Differential Revision: https://reviews.llvm.org/D119033
The bulk of the implementation is common between 'release' mode (==AOT-ed
model) and 'development' mode (for training), the main difference is
that in development mode, we may also log features (for training logs),
inject scoring information (currently after the Virtual Register
Rewriter) and then produce the log file.
This patch also introduces the score injection pass, 'Register
Allocation Pass Scoring', which is trivially just logging the score in
development mode.
Differential Revision: https://reviews.llvm.org/D117147
In a couple of places machine verification was disabled for no apparent
reason, probably just because an "addPass(..., false)" line was cut and
pasted from elsewhere.
After this patch the only remaining place where machine verification is
disabled in the generic TargetPassConfig code, is after addPreEmitPass.
Enable verification of live intervals immediately after computing them
(when -early-live-intervals is used) and fix a problem that that
provokes: currently the verifier insists that a segment that ends at an
early-clobber slot must be followed by another segment starting at the
same slot. But before TwoAddressInstruction runs, the equivalent
condition is: a segment that ends at an early-clobber slot must have its
last use tied to an early-clobber def. That condition is harder to check
here, so for now just disable this check until tied operands have been
rewritten.
Differential Revision: https://reviews.llvm.org/D111065
Enabling this does not show any problems in check-llvm in an
LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110703
LiveVariables does not examine the contents of bundles, so
MachineVerifier should not expect it to know about kill flags on
operands of instructions inside a bundle.
With this fix we can enable machine verification after running the
LiveVariables analysis. Doing this does not show any problems in
check-llvm in an LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110700
Enabling this does not show any problems in check-llvm in an
LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110697
Enabling this does not show any problems in check-llvm in an
LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110695
Machine verification after DetectDeadLanes has been disabled since the
pass was first added in D18427, but I guess this was just due to copy-
and-paste. Enabling it does not show any problems in check-llvm in an
LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110689
Machine verification after RemoveRedundantDebugValues has been disabled
since the pass was first added in D105279, but I guess this was just due
to copy-and-paste. Enabling it does not show any problems in check-llvm
in an LLVM_ENABLE_EXPENSIVE_CHECKS build.
Differential Revision: https://reviews.llvm.org/D110688
Currenlty PseudoProbeInserter is a pass conditioned on a target switch. It works well with a single clang invocation. It doesn't work so well when the backend is called separately (i.e, through the linker or llc), where user has always to pass -pseudo-probe-for-profiling explictly. I'm making the pass a default pass that requires no command line arg to trigger, but will be actually run depending on whether the CU comes with `llvm.pseudo_probe_desc` metadata.
Reviewed By: wenlei
Differential Revision: https://reviews.llvm.org/D110209
This patch implements Flow Sensitive Sample FDO (FSAFDO) profile
loader. We have two profile loaders for FS profile,
one before RegAlloc and one before BlockPlacement.
To enable it, when -fprofile-sample-use=<profile> is specified,
add "-enable-fs-discriminator=true \
-disable-ra-fsprofile-loader=false \
-disable-layout-fsprofile-loader=false"
to turn on the FS profile loaders.
Differential Revision: https://reviews.llvm.org/D107878
This patch adds Pass1 of MIRADDFSDiscriminatorsPass before register
allocation, and Pass2 of MIRAddFSDiscriminatorsPass before
Block-Placement. This is still under --enable-fs-discrmininator
option (default false).
This would reduce the turn-around time for FSAFDO transition.
Differential Revision: https://reviews.llvm.org/D104579
This new MIR pass removes redundant DBG_VALUEs.
After the register allocator is done, more precisely, after
the Virtual Register Rewriter, we end up having duplicated
DBG_VALUEs, since some virtual registers are being rewritten
into the same physical register as some of existing DBG_VALUEs.
Each DBG_VALUE should indicate (at least before the LiveDebugValues)
variables assignment, but it is being clobbered for function
parameters during the SelectionDAG since it generates new DBG_VALUEs
after COPY instructions, even though the parameter has no assignment.
For example, if we had a DBG_VALUE $regX as an entry debug value
representing the parameter, and a COPY and after the COPY,
DBG_VALUE $virt_reg, and after the virtregrewrite the $virt_reg gets
rewritten into $regX, we'd end up having redundant DBG_VALUE.
This breaks the definition of the DBG_VALUE since some analysis passes
might be built on top of that premise..., and this patch tries to fix
the MIR with the respect to that.
This first patch performs bacward scan, by trying to detect a sequence of
consecutive DBG_VALUEs, and to remove all DBG_VALUEs describing one
variable but the last one:
For example:
(1) DBG_VALUE $edi, !"var1", ...
(2) DBG_VALUE $esi, !"var2", ...
(3) DBG_VALUE $edi, !"var1", ...
...
in this case, we can remove (1).
By combining the forward scan that will be introduced in the next patch
(from this stack), by inspecting the statistics, the RemoveRedundantDebugValues
removes 15032 instructions by using gdb-7.11 as a testbed.
Differential Revision: https://reviews.llvm.org/D105279
AMDGPU normally spills SGPRs to VGPRs. Previously, since all register
classes are handled at the same time, this was problematic. We don't
know ahead of time how many registers will be needed to be reserved to
handle the spilling. If no VGPRs were left for spilling, we would have
to try to spill to memory. If the spilled SGPRs were required for exec
mask manipulation, it is highly problematic because the lanes active
at the point of spill are not necessarily the same as at the restore
point.
Avoid this problem by fully allocating SGPRs in a separate regalloc
run from VGPRs. This way we know the exact number of VGPRs needed, and
can reserve them for a second run. This fixes the most serious
issues, but it is still possible using inline asm to make all VGPRs
unavailable. Start erroring in the case where we ever would require
memory for an SGPR spill.
This is implemented by giving each regalloc pass a callback which
reports if a register class should be handled or not. A few passes
need some small changes to deal with leftover virtual registers.
In the AMDGPU implementation, a new pass is introduced to take the
place of PrologEpilogInserter for SGPR spills emitted during the first
run.
One disadvantage of this is currently StackSlotColoring is no longer
used for SGPR spills. It would need to be run again, which will
require more work.
Error if the standard -regalloc option is used. Introduce new separate
-sgpr-regalloc and -vgpr-regalloc flags, so the two runs can be
controlled individually. PBQB is not currently supported, so this also
prevents using the unhandled allocator.
This patch was split from https://reviews.llvm.org/D102246
[SampleFDO] New hierarchical discriminator for Flow Sensitive SampleFDO
This is mainly for ProfileData part of change. It will load
FS Profile when such profile is detected. For an extbinary format profile,
create_llvm_prof tool will add a flag to profile summary section.
For other format profiles, the users need to use an internal option
(-profile-isfs) to tell the compiler that the profile uses FS discriminators.
This patch also simplified the bit API used by FS discriminators.
Differential Revision: https://reviews.llvm.org/D103041
It breaks up the function pass manager in the codegen pipeline.
With empty parameters, it looks at the -mllvm flag -rewrite-map-file.
This is likely not in use.
Add a check that we only have one function pass manager in the codegen
pipeline.
Some tests relied on the fact that we had a module pass somewhere in the
codegen pipeline.
addr-label.ll crashes on ARM due to this change. This is because a
ARMConstantPoolConstant containing a BasicBlock to represent a
blockaddress may hold an invalid pointer to a BasicBlock if the
blockaddress is invalidated by its BasicBlock getting removed. In that
case all referencing blockaddresses are RAUW a constant int. Making
ARMConstantPoolConstant::CVal a WeakVH fixes the crash, but I'm not sure
that's the right fix. As a workaround, create a barrier right before
ISel so that IR optimizations can't happen while a
ARMConstantPoolConstant has been created.
Reviewed By: rnk, MaskRay, compnerd
Differential Revision: https://reviews.llvm.org/D99707
This patch implements first part of Flow Sensitive SampleFDO (FSAFDO).
It has the following changes:
(1) disable current discriminator encoding scheme,
(2) new hierarchical discriminator for FSAFDO.
For this patch, option "-enable-fs-discriminator=true" turns on the new
functionality. Option "-enable-fs-discriminator=false" (the default)
keeps the current SampleFDO behavior. When the fs-discriminator is
enabled, we insert a flag variable, namely, llvm_fs_discriminator, to
the object. This symbol will checked by create_llvm_prof tool, and used
to generate a profile with FS-AFDO discriminators enabled. If this
happens, for an extbinary format profile, create_llvm_prof tool
will add a flag to profile summary section.
Differential Revision: https://reviews.llvm.org/D102246
This reverts the revert 02c5ba8679
Fix:
Pass was registered as DUMMY_FUNCTION_PASS causing the newpm-pass
functions to be doubly defined. Triggered in -DLLVM_ENABLE_MODULE=1
builds.
Original commit:
This patch implements expansion of llvm.vp.* intrinsics
(https://llvm.org/docs/LangRef.html#vector-predication-intrinsics).
VP expansion is required for targets that do not implement VP code
generation. Since expansion is controllable with TTI, targets can switch
on the VP intrinsics they do support in their backend offering a smooth
transition strategy for VP code generation (VE, RISC-V V, ARM SVE,
AVX512, ..).
Reviewed By: rogfer01
Differential Revision: https://reviews.llvm.org/D78203
Fangrui Song