On AMDGPU where operations i64 operations are often bitcasted to v2i32
and back, this pattern shows up regularly where it breaks some
expected combines on i64, such as load width reducing.
This fixes some test failures in a future commit when i64 loads
are changed to promote.
llvm-svn: 262397
This reverts commit r262316.
It seems that my change breaks an out-of-tree chromium buildbot, so
I'm reverting this in order to investigate the situation further.
llvm-svn: 262387
Summary:
This patch modifies the existing comparison, branch, conditional-move
and select patterns, and adds new ones where needed. Also, the updated
SLT{u,i,iu} set of instructions generate a GPR width result.
The majority of the code changes in the Mips back-end fix the wrong
assumption that the result of SETCC nodes always produce an i32 value.
The changes in the common code path account for the fact that in 64-bit
MIPS targets, i1 is promoted to i32 instead of i64.
Reviewers: dsanders
Subscribers: dsanders, llvm-commits
Differential Revision: http://reviews.llvm.org/D10970
llvm-svn: 262316
In the case where op = add, y = base_ptr, and x = offset, this
transform:
(op y, (op x, c1)) -> (op (op x, y), c1)
breaks the canonical form of add by putting the base pointer in the
second operand and the offset in the first.
This fix is important for the R600 target, because for some address
spaces the base pointer and the offset are stored in separate register
classes. The old pattern caused the ISel code for matching addressing
modes to put the base pointer and offset in the wrong register classes,
which required no-trivial code transformations to fix.
llvm-svn: 262148
Summary:
This patch skips DAG combine of fp_round (fp_round x) if it results in
an fp_round from f80 to f16.
fp_round from f80 to f16 always generates an expensive (and as yet,
unimplemented) libcall to __truncxfhf2. This prevents selection of
native f16 conversion instructions from f32 or f64. Moreover, the first
(value-preserving) fp_round from f80 to either f32 or f64 may become a
NOP in platforms like x86.
Reviewers: ab
Subscribers: srhines, llvm-commits
Differential Revision: http://reviews.llvm.org/D17221
llvm-svn: 260769
This patch consists of two parts: a performance fix in DAGCombiner.cpp
and a correctness fix in SelectionDAG.cpp.
The test case tests the bug that's uncovered by the performance fix, and
fixed by the correctness fix.
The performance fix keeps the containers required by the
hasPredecessorHelper (which is a lazy DFS) and reuse them. Since
hasPredecessorHelper is called in a loop, the overall efficiency reduced
from O(n^2) to O(n), where n is the number of SDNodes.
The correctness fix keeps iterating the neighbor list even if it's time
to early return. It will return after finishing adding all neighbors to
Worklist, so that no neighbors are discarded due to the original early
return.
llvm-svn: 259691
Summary:
This is an extension to the existing implementation of r242436 which
restricts to only select inputs. This version fixes missed opportunities
in pr26084 by attempting to lower conditional compare sequences of
and/or trees with setcc leafs. This will additionaly handle the case
when a tree with select input is not a conjunction-disjunction tree
but some of the sub trees are conjunction-disjunction trees.
Reviewers: jmolloy, t.p.northover, mcrosier, MatzeB
Subscribers: mcrosier, llvm-commits, junbuml, haicheng, mssimpso, gberry
Differential Revision: http://reviews.llvm.org/D16291
llvm-svn: 259387
Summary:
findBetterNeighborChains does not handle volatile or indexed stores.
However, it did not check when adding stores to ChainedStores.
Reviewers: arsenm
Differential Revision: http://reviews.llvm.org/D16463
llvm-svn: 259024
This reapplies r258296 and r258366, and also fixes an existing bug in
SelectionDAG.cpp's isMemSrcFromString, neglecting to account for the
offset in a GlobalAddressSDNode, which is uncovered by those patches.
llvm-svn: 258482
This reverts r258296 and the follow up r258366. With this change, we
miscompiled the following program on Windows:
#include <string>
#include <iostream>
static const char kData[] = "asdf jkl;";
int main() {
std::string s(kData + 3, sizeof(kData) - 3);
std::cout << s << '\n';
}
llvm-svn: 258465
SelectionDAG previously missed opportunities to fold constants into
GlobalAddresses in several areas. For example, given `(add (add GA, c1), y)`, it
would often reassociate to `(add (add GA, y), c1)`, missing the opportunity to
create `(add GA+c, y)`. This isn't often visible on targets such as X86 which
effectively reassociate adds in their complex address-mode folding logic,
however it is currently visible on WebAssembly since it currently has very
simple address mode folding code that doesn't reassociate anything.
This patch fixes this by making SelectionDAG fold offsets into GlobalAddresses
at the same times that it folds constants together, so that it doesn't miss any
opportunities to perform such folding.
Differential Revision: http://reviews.llvm.org/D16090
llvm-svn: 258296
In an inbounds getelementptr, when an index produces a constant non-negative
offset to add to the base, the add can be assumed to not have unsigned overflow.
This relies on the assumption that addresses can't occupy more than half the
address space, which isn't possible in C because it wouldn't be possible to
represent the difference between the start of the object and one-past-the-end
in a ptrdiff_t.
Setting the NoUnsignedWrap flag is theoretically useful in general, and is
specifically useful to the WebAssembly backend, since it permits stronger
constant offset folding.
Differential Revision: http://reviews.llvm.org/D15544
llvm-svn: 256890
Almost all these changes are conditioned and only apply to the new
x86-64 f128 type configuration, which will be enabled in a follow up
patch. They are required together to make new f128 work. If there is
any error, we should fix or revert them as a whole.
These changes should have no impact to current configurations.
* Relax type legalization checks to accept new f128 type configuration,
whose TypeAction is TypeSoftenFloat, not TypeLegal, but also has
TLI.isTypeLegal true.
* Relax GetSoftenedFloat to return in some cases f128 type SDValue,
which is TLI.isTypeLegal but not "softened" to i128 node.
* Allow customized FABS, FNEG, FCOPYSIGN on new f128 type configuration,
to generate optimized bitwise operators for libm functions.
* Enhance related Lower* functions to handle f128 type.
* Enhance DAGTypeLegalizer::run, SoftenFloatResult, and related functions
to keep new f128 type in register, and convert f128 operators to library calls.
* Fix Combiner, Emitter, Legalizer routines that did not handle f128 type.
* Add ExpandConstant to handle i128 constants, ExpandNode
to handle ISD::Constant node.
* Add one more parameter to getCommonSubClass and firstCommonClass,
to guarantee that returned common sub class will contain the specified
simple value type.
This extra parameter is used by EmitCopyFromReg in InstrEmitter.cpp.
* Fix infinite loop in getTypeLegalizationCost when f128 is the value type.
* Fix printOperand to handle null operand.
* Enhance ISD::BITCAST node to handle f128 constant.
* Expand new f128 type for BR_CC, SELECT_CC, SELECT, SETCC nodes.
* Enhance X86AsmPrinter to emit f128 values in comments.
Differential Revision: http://reviews.llvm.org/D15134
llvm-svn: 254653
Summary:
Many target lowerings copy-paste the code to test SDValues for known constants.
This code can instead be shared in SelectionDAG.cpp, and reused in the targets.
Reviewers: MatzeB, andreadb, tstellarAMD
Subscribers: arsenm, jyknight, llvm-commits
Differential Revision: http://reviews.llvm.org/D14945
llvm-svn: 254085
When MergeConsecutiveStores() combines two loads and two stores into
wider loads and stores, the chain users of both of the original loads
must be transfered to the new load, because it may be that a chain
user only depends on one of the loads.
New test case: test/CodeGen/SystemZ/dag-combine-01.ll
Reviewed by James Y Knight.
Bugzilla: https://llvm.org/bugs/show_bug.cgi?id=25310#c6
llvm-svn: 253779
Summary:
Don't fold
(zext (and (load x), cst)) -> (and (zextload x), (zext cst))
if
(and (load x) cst)
will match as a zextload already and has additional users.
For example, the following IR:
%load = load i32, i32* %ptr, align 8
%load16 = and i32 %load, 65535
%load64 = zext i32 %load16 to i64
store i32 %load16, i32* %dst1, align 4
store i64 %load64, i64* %dst2, align 8
used to produce the following aarch64 code:
ldr w8, [x0]
and w9, w8, #0xffff
and x8, x8, #0xffff
str w9, [x1]
str x8, [x2]
but with this change produces the following aarch64 code:
ldrh w8, [x0]
str w8, [x1]
str x8, [x2]
Reviewers: resistor, mcrosier
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D14340
llvm-svn: 252789
1) PR25154. This is basically a repeat of PR18102, which was fixed in
r200201, and broken again by r234430. The latter changed which of the
store nodes was merged into from the first to the last. Thus, we now
also need to prefer merging a later store at a given address into the
target node, instead of an earlier one.
2) While investigating that, I also realized I'd introduced a bug in
r236850. There, I removed a check for alignment -- not realizing that
nothing except the alignment check was ensuring that none of the stores
were overlapping! This is a really bogus way to ensure there's no
aliased stores.
A better solution to both of these issues is likely to always use the
code added in the 'if (UseAA)' branches which rearrange the chain based
on a more principled analysis. I'll look into whether that can be used
always, but in the interest of getting things back to working, I think a
minimal change makes sense.
llvm-svn: 251816
This is a usage of the IR-level fast-math-flags now that they are propagated to SDNodes.
This was originally part of D8900.
Removing the global 'enable-unsafe-fp-math' checks will require auto-upgrade and
possibly other changes.
Differential Revision: http://reviews.llvm.org/D9708
llvm-svn: 251450
When taking the remainder of a value divided by a constant, visitREM()
attempts to convert the REM to a longer but faster sequence of instructions.
This conversion calls combine() on a speculative DIV instruction. Commit
rL250825 may cause this combine() to return a DIVREM, corrupting nearby nodes.
Flow eventually hits unreachable().
This patch adds a test case and a check to prevent visitREM() from trying
to convert the REM instruction in cases where a DIVREM is possible.
See http://reviews.llvm.org/D14035
llvm-svn: 251373
We don't need a mask of a rotation result to be a constant splat - any constant scalar/vector can be usefully folded.
Followup to D13851.
llvm-svn: 251197
This patch adds support for lowering to the XOP VPROT / VPROTI vector bit rotation instructions.
This has required changes to the DAGCombiner rotation pattern matching to support vector types - so far I've only changed it to support splat vectors, but generalising this further is feasible in the future.
Differential Revision: http://reviews.llvm.org/D13851
llvm-svn: 251188
When we fold "mul ((add x, c1), c1)" -> "add ((mul x, c2), c1*c2)", we bail if (add x, c1) has multiple
users which would result in an extra add instruction.
In such cases, this patch adds a check to see if we can eliminate a multiply instruction in exchange for the extra add.
I also added the capability of doing the existing optimization with non-splatted vectors (splatted also works).
Differential Revision: http://reviews.llvm.org/D13740
llvm-svn: 251028
Summary:
In addition to moving the code over, this patch amends the DIV,REM -> DIVREM
combining to run on all affected nodes at once: if the nodes are converted
to DIVREM one at a time, then the resulting DIVREM may get legalized by the
backend into something target-specific that we won't be able to recognize
and correlate with the remaining nodes.
The motivation is to "prepare terrain" for D13862: when we set DIV and REM
to be legalized to libcalls, instead of the DIVREM, we otherwise lose the
ability to combine them together. To prevent this, we need to take the
DIV,REM -> DIVREM combining out of the lowering stage.
Reviewers: RKSimon, eli.friedman, rengolin
Subscribers: john.brawn, rengolin, llvm-commits
Differential Revision: http://reviews.llvm.org/D13733
llvm-svn: 250825
Summary:
Caching SDLoc(N), instead of recreating it in every single
function call, keeps the code denser, and allows to unwrap long lines.
Reviewers: sunfish, atrick, sdmitrouk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13726
llvm-svn: 250305
Summary: The two implementations had more code in common than not.
Reviewers: sunfish, MatzeB, sdmitrouk
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D13724
llvm-svn: 250302
The comment says this was stopped because it was unlikely to be
profitable. This is not true if you want to combine vector loads
with multiple components.
For a simple case that looks like
t0 = load t0 ...
t1 = load t0 ...
t2 = load t0 ...
t3 = load t0 ...
t4 = store t0:1, t0:1
t5 = store t4, t1:0
t6 = store t5, t2:0
t7 = store t6, t3:0
We want to get all of these stores onto a chain
that is a TokenFactor of these N loads. This mostly
solves the AMDGPU merge-stores.ll regressions
with -combiner-alias-analysis for merging vector
stores of vector loads.
llvm-svn: 250138
This basic combine was surprisingly missing.
AMDGPU legalizes many operations in terms of 32-bit vector components,
so not doing this results in many extra copies and subregister extracts
that need to be cleaned up later.
InstCombine already does this for the hasOneUse case. The target hook
is to fix a handful of tests which break (e.g. ARM/vmov.ll) which turn
from a vector materialize repeated immediate instruction to a constant
vector load with more scalar copies from it.
llvm-svn: 250129
We have a number of functions that implement constant folding of vectors (unary and binary ops) in near identical manners (and the differences don't appear to be critical).
This patch introduces a common implementation (SelectionDAG::FoldConstantVectorArithmetic) and calls this in both the unary and binary op cases.
After this initial patch I intend to begin enabling vector constant folding for a wider number of opcodes in SelectionDAG::getNode().
Differential Revision: http://reviews.llvm.org/D13665
llvm-svn: 250118
visitSIGN_EXTEND_INREG calls SelectionDAG::getNode to constant fold scalar constants but handles vector constants itself, despite getNode being capable of dealing with them.
This required a minor change to the getNode implementation to actually deal with cases where the scalars of a BUILD_VECTOR were wider integers than the vector type - which was the only extra ability of the visitSIGN_EXTEND_INREG implementation.
No codegen intended and all existing tests remain the same.
llvm-svn: 249236
When AA is being used, non-aliasing stores are canonicalized to use the same
chain, and DAGCombiner::getStoreMergeAndAliasCandidates can take advantage of
this by looking only as users of a store's chain operand. However, user
iteration is not result-number specific, we need to check that the use is as a
chain operand, and not via some other operand. It is certainly possible to have
another potentially-aliasing store, which shares the first's base pointer, and
uses the first's chain's node via some other operand.
Failure to catch this situation caused, at least in the included test case, an
assert later because the relative sequence-number ordering caused later
replacement to create a cycle in the DAG.
llvm-svn: 248698
This is a redo of D7208 ( r227242 - http://llvm.org/viewvc/llvm-project?view=revision&revision=227242 ).
The patch was reverted because an AArch64 target could infinite loop after the change in DAGCombiner
to merge vector stores. That happened because AArch64's allowsMisalignedMemoryAccesses() wasn't telling
the truth. It reported all unaligned memory accesses as fast, but then split some 128-bit unaligned
accesses up in performSTORECombine() because they are slow.
This patch attempts to fix the problem in AArch's allowsMisalignedMemoryAccesses() while preserving
existing (perhaps questionable) lowering behavior.
The x86 test shows that store merging is working as intended for a target with fast 32-byte unaligned
stores.
Differential Revision: http://reviews.llvm.org/D12635
llvm-svn: 248622
If the stores are storing values from loads which partially
alias the stores, we could end up placing the merged loads
and stores on the same chain which has the potential to break.
Each store may have a different chain dependency on only some
of the original loads. Create a new TokenFactor to capture all
of the required dependencies of the stores rather than assuming
all stores can use the same chain.
The testcase is a situation where this happens, although
it does not have an observable change from this. The DAG nodes
just happened to not be reordered before despite this missing
chain dependency.
This is based on an off-list report for an out of tree target
which regressed due to r246307 and I haven't managed to find a case
where the nodes do end up reordered with an in tree target.
llvm-svn: 248468
This patch adds support for combining patterns such as (FMUL(FADD(1.0, x), y)) and (FMUL(FSUB(x, 1.0), y)) to their FMA equivalents.
This is useful in particular for linear interpolation cases such as (FADD(FMUL(x, t), FMUL(y, FSUB(1.0, t))))
Differential Revision: http://reviews.llvm.org/D13003
llvm-svn: 248210
If storing multiple FP constants, some subset of the stores
would be replaced with integers due to visit order, so
MergeConsecutiveStores would only partially merge
these.
llvm-svn: 248169
After D10403, we had FMF in the DAG but disabled by default. Nick reported no crashing errors after some stress testing,
so I enabled them at r243687. However, Escha soon notified us of a bug not covered by any in-tree regression tests:
if we don't propagate the flags, we may fail to CSE DAG nodes because differing FMF causes them to not match. There is
one test case in this patch to prove that point.
This patch hopes to fix or leave a 'TODO' for all of the in-tree places where we create nodes that are FMF-capable. I
did this by putting an assert in SelectionDAG.getNode() to find any FMF-capable node that was being created without FMF
( D11807 ). I then ran all regression tests and test-suite and confirmed that everything passes.
This patch exposes remaining work to get DAG FMF to be fully functional: (1) add the flags to non-binary nodes such as
FCMP, FMA and FNEG; (2) add the flags to intrinsics; (3) use the flags as conditions for transforms rather than the
current global settings.
Differential Revision: http://reviews.llvm.org/D12095
llvm-svn: 247815
Summary:
The BUILD_VECTOR node will truncate its operators to match the
type. We need to take this into account when constant folding -
we need to perform a truncation before constant folding the elements.
This is because the upper bits can change the result, depending on
the operation type (for example this is the case for min/max).
This change also adds a regression test.
Reviewers: jmolloy
Subscribers: jmolloy, llvm-commits
Differential Revision: http://reviews.llvm.org/D12697
llvm-svn: 247265
Use and check the 'IsFast' optional parameter to TLI.allowsMemoryAccess() any time
we have a merged access candidate. Without this patch, we were generating unaligned
16-byte (SSE) memops for x86 targets where those accesses are slow.
This change was mentioned in:
http://reviews.llvm.org/D10662 and
http://reviews.llvm.org/D10905
and will help solve PR21711.
Differential Revision: http://reviews.llvm.org/D12573
llvm-svn: 246771
SETCC is one of those special node types for which operation actions (legality,
etc.) is keyed off of an operand type, not the node's value type. This makes
sense because the value type of a legal SETCC node is determined by its
operands' value type (via the TLI function getSetCCResultType). When the
SDAGBuilder creates SETCC nodes, it either creates them with an MVT::i1 value
type, or directly with the value type provided by TLI.getSetCCResultType.
The first problem being fixed here is that DAGCombine had several places
querying TLI.isOperationLegal on SETCC, but providing the return of
getSetCCResultType, instead of the operand type directly. This does not mean
what the author thought, and "luckily", most in-tree targets have SETCC with
Custom lowering, instead of marking them Legal, so these checks return false
anyway.
The second problem being fixed here is that two of the DAGCombines could create
SETCC nodes with arbitrary (integer) value types; specifically, those that
would simplify:
(setcc a, b, op1) and|or (setcc a, b, op2) -> setcc a, b, op3
(which is possible for some combinations of (op1, op2))
If the operands of the and|or node are actual setcc nodes, then this is not an
issue (because the and|or must share the same type), but, the relevant code in
DAGCombiner::visitANDLike and DAGCombiner::visitORLike actually calls
DAGCombiner::isSetCCEquivalent on each operand, and that function will
recognise setcc-like select_cc nodes with other return types. And, thus, when
creating new SETCC nodes, we need to be careful to respect the value-type
constraint. This is even true before type legalization, because it is quite
possible for the SELECT_CC node to have a legal type that does not happen to
match the corresponding TLI.getSetCCResultType type.
To be explicit, there is nothing that later fixes the value types of SETCC
nodes (if the type is legal, but does not happen to match
TLI.getSetCCResultType). Creating SETCCs with an MVT::i1 value type seems to
work only because, either MVT::i1 is not legal, or it is what
TLI.getSetCCResultType returns if it is legal. Fixing that is a larger change,
however. For the time being, restrict the relevant transformations to produce
only SETCC nodes with a value type matching TLI.getSetCCResultType (or MVT::i1
prior to type legalization).
Fixes PR24636.
llvm-svn: 246507
This was part of D7208 (r227242), but that commit was reverted because it exposed
a bug in AArch64 lowering. I should have that fixed and the rest of the commit
reinstated soon.
llvm-svn: 246493
DAGCombine has a utility wrapper around TLI's getSetCCResultType; use it in the
one place in DAGCombine still directly calling the TLI function. NFC.
llvm-svn: 246482
This code was dead when it was committed in r23665 (Oct 7, 2005), and before it
reaches its 10th anniversary, it really should go. We can always bring it back
if we'd like, but it forms more SETCC nodes, and the way we do legality
checking on SETCC nodes is wrong in a number of places, and removing this means
fewer places to fix. NFC.
llvm-svn: 246466
When combiner AA is enabled, look at stores on the same chain.
Non-aliasing stores are moved to the same chain so the existing
code fails because it expects to find an adajcent store on a consecutive
chain.
Because of how DAGCombiner tries these store combines,
MergeConsecutiveStores doesn't see the correct set of stores on the chain
when it visits the other stores. Each store individually has its chain
fixed before trying to merge consecutive stores, and then tries to merge
stores from that point before the other stores have been processed to
have their chains fixed. To fix this, attempt to use FindBetterChain
on any possibly neighboring stores in visitSTORE.
Suppose you have 4 32-bit stores that should be merged into 1 vector
store. One store would be visited first, fixing the chain. What happens is
because not all of the store chains have yet been fixed, 2 of the stores
are merged. The other 2 stores later have their chains fixed,
but because the other stores were already merged, they have different
memory types and merging the two different sized stores is not
supported and would be more difficult to handle.
llvm-svn: 246307
Fixes PR24602: r245689 introduced an unguarded use of
SelectionDAG::FoldConstantArithmetic, which returns 0 when it fails
because of opaque (hoisted) constants.
llvm-svn: 246217
The FP16_TO_FP node only uses the bottom 16 bits of its input, so the
following pattern can be optimised by removing the AND:
(FP16_TO_FP (AND op, 0xffff)) -> (FP16_TO_FP op)
This is a common pattern for ARM targets when functions have __fp16
arguments, as they are passed as floats (so that they get passed in the
correct registers), but then bitcast and truncated to ignore the top 16
bits.
llvm-svn: 245832
This is intended to improve code generation for GEPs, as the index value is
shifted by the element size and in GEPs of multi-dimensional arrays the index
of higher dimensions is multiplied by the lower dimension size.
Differential Revision: http://reviews.llvm.org/D12197
llvm-svn: 245689
We still need to add constant folding of vector comparisons to fold the tests for targets that don't support the respective min/max nodes
I needed to update 2011-12-06-AVXVectorExtractCombine to load a vector instead of using a constant vector to prevent it folding
Differential Revision: http://reviews.llvm.org/D12118
llvm-svn: 245503
Check to see if this is a CONCAT_VECTORS of a bunch of EXTRACT_SUBVECTOR operations. If so, and if the EXTRACT_SUBVECTOR vector inputs come from at most two distinct vectors the same size as the result, attempt to turn this into a legal shuffle.
Differential Revision: http://reviews.llvm.org/D12125
llvm-svn: 245490
This removes the isPow2SDivCheap() query, as it is not currently used in
any meaningful way. isIntDivCheap() no longer relies on a state variable
(as all in-tree target set it to false), but the interface allows querying
based on the type optimization level.
NFC.
Differential Revision: http://reviews.llvm.org/D12082
llvm-svn: 245430
The current code normalizes select(C0, x, select(C1, x, y)) towards
select(C0|C1, x, y) if the targets prefers that form. This patch adds an
additional rule that if the select(C1, x, y) part already exists in the
function then we want to normalize into the other direction because the
effects of reusing the existing value are bigger than transforming into
the target preferred form.
This addresses regressions following r238793, see also:
http://lists.cs.uiuc.edu/pipermail/llvm-commits/Week-of-Mon-20150727/290272.html
Differential Revision: http://reviews.llvm.org/D11616
llvm-svn: 245350
For cases where we TRUNCATE and then ZERO_EXTEND to a larger size (often from vector legalization), see if we can mask the source data and then ZERO_EXTEND (instead of after a ANY_EXTEND). This can help avoid having to generate a larger mask, and possibly applying it to several sub-vectors.
(zext (truncate x)) -> (zext (and(x, m))
Includes a minor patch to SystemZ to better recognise 8/16-bit zero extension patterns from RISBG bit-extraction code.
This is the first of a number of minor patches to help improve the conversion of byte masks to clear mask shuffles.
Differential Revision: http://reviews.llvm.org/D11764
llvm-svn: 245160
This commit removes the global manager variable which is responsible for
storing and allocating pseudo source values and instead it introduces a new
manager class named 'PseudoSourceValueManager'. Machine functions now own an
instance of the pseudo source value manager class.
This commit also modifies the 'get...' methods in the 'MachinePointerInfo'
class to construct pseudo source values using the instance of the pseudo
source value manager object from the machine function.
This commit updates calls to the 'get...' methods from the 'MachinePointerInfo'
class in a lot of different files because those calls now need to pass in a
reference to a machine function to those methods.
This change will make it easier to serialize pseudo source values as it will
enable me to transform the mips specific MipsCallEntry PseudoSourceValue
subclass into two target independent subclasses.
Reviewers: Akira Hatanaka
llvm-svn: 244693
Summary:
For example:
s6 = s0*s5;
s2 = s6*s6 + s6;
...
s4 = s6*s3;
We notice that it is possible for s2 is folded to fma (s0, s5, fmul (s6 s6)).
This only happens when Aggressive is true, otherwise hasOneUse() check
already prevents from folding the multiplication with more uses.
Test Plan: test/CodeGen/NVPTX/fma-assoc.ll
Patch by Xuetian Weng
Reviewers: hfinkel, apazos, jingyue, ohsallen, arsenm
Subscribers: arsenm, jholewinski, llvm-commits
Differential Revision: http://reviews.llvm.org/D11855
llvm-svn: 244649
Create wrapper methods in the Function class for the OptimizeForSize and MinSize
attributes. We want to hide the logic of "or'ing" them together when optimizing
just for size (-Os).
Currently, we are not consistent about this and rely on a front-end to always set
OptimizeForSize (-Os) if MinSize (-Oz) is on. Thus, there are 18 FIXME changes here
that should be added as follow-on patches with regression tests.
This patch is NFC-intended: it just replaces existing direct accesses of the attributes
by the equivalent wrapper call.
Differential Revision: http://reviews.llvm.org/D11734
llvm-svn: 243994
The XformToShuffleWithZero method currently checks AND masks at the per-lane level for all-one and all-zero constants and attempts to convert them to legal shuffle clear masks.
This patch generalises XformToShuffleWithZero, splitting and checking the sub-lanes of the constants down to the byte level to see if any legal shuffle clear masks are possible. This allows a lot of masks (often from legalization or truncation) to be folded into existing shuffle patterns and removes a lot of constant mask loading.
There are a few examples of poor shuffle lowering that are exposed by this patch that will be cleaned up in future patches (e.g. merging shuffles that are separated by bitcasts, x86 legalized v8i8 zero extension uses PMOVZX+AND+AND instead of AND+PMOVZX, etc.)
Differential Revision: http://reviews.llvm.org/D11518
llvm-svn: 243831
Making allowableAlignment() more accessible was suggested as a predecessor patch
for D10662, so I've pulled it into TargetLowering. This let's us remove 4 instances
of duplicate logic in LegalizeDAG.
There's a subtle functional change in the implementation: the existing
allowableAlignment() code was using getPrefTypeAlignment() when checking
alignment with the DataLayout and assumed that was fast. In this implementation,
we use getABITypeAlignment() and assume that is fast. See the TODO comment or the
discussion in the Phab review for future improvements in this implementation
(don't use the data layout at all).
There are no regression test changes from this difference, and I'm not sure how to
expose it via a test. I think we actually do want to provide the 'Fast' param when
checking this from DAGCombiner::MergeConsecutiveStores(). Ie, we shouldn't merge
stores if the new stores are not going to be fast. But that change will require
fixing allowsMisalignedMemoryAccess() overrides as noted in D10662.
Differential Revision: http://reviews.llvm.org/D10905
llvm-svn: 243549
PR24141: https://llvm.org/bugs/show_bug.cgi?id=24141
contains a test case where we have duplicate entries in a node's uses() list.
After r241826, we use CombineTo() to delete dead nodes when combining the uses into
reciprocal multiplies, but this fails if we encounter the just-deleted node again in
the list.
The solution in this patch is to not add duplicate entries to the list of users that
we will subsequently iterate over. For the test case, this avoids triggering the
combine divisors logic entirely because there really is only one user of the divisor.
Differential Revision: http://reviews.llvm.org/D11345
llvm-svn: 243500
This fix was suggested as part of D11345 and is part of fixing PR24141.
With this change, we can avoid walking the uses of a divisor node if the target
doesn't want the combineRepeatedFPDivisors transform in the first place.
There is no NFC-intended other than that.
Differential Revision: http://reviews.llvm.org/D11531
llvm-svn: 243498
We don't bitcast the UNDEFs - that is done in visitVECTOR_SHUFFLE, and the getValueType should come from the operand's SDValue not the SDNode.
llvm-svn: 242640
The motivation is to allow GatherAllAliases / FindBetterChain
to not give up on dependent loads of a pointer from constant memory.
This is important for AMDGPU, because most loads are pointers
derived from a load of a kernel argument from constant memory.
llvm-svn: 241948
This patch fixes bugs that were exposed by the addition of fast-math-flags in the DAG:
r237046 ( http://reviews.llvm.org/rL237046 ):
1. When replacing a division node, it's not enough to RAUW.
We should call CombineTo() to delete dead nodes and combine again.
2. Because we are changing the DAG, we can't return an empty SDValue
after the transform. As the code comments say:
Visitation implementation - Implement dag node combining for different node types.
The semantics are as follows: Return Value:
SDValue.getNode() == 0 - No change was made
SDValue.getNode() == N - N was replaced, is dead and has been handled.
otherwise - N should be replaced by the returned Operand.
The new test case shows no difference with or without this patch, but it will crash if
we re-apply r237046 or enable FMF via the current -enable-fmf-dag cl::opt.
Differential Revision: http://reviews.llvm.org/D9893
llvm-svn: 241826
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11040
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241778
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11037
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241776
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: jholewinski, ted, yaron.keren, rafael, llvm-commits
Differential Revision: http://reviews.llvm.org/D11028
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241775
Summary:
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits, rafael, yaron.keren
Differential Revision: http://reviews.llvm.org/D11017
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241655
Summary:
SelectionDAG itself is not invoking directly the DataLayout in the
TargetMachine, but the "TargetLowering" class is still using it. I'll
address it in a following commit.
This change is part of a series of commits dedicated to have a single
DataLayout during compilation by using always the one owned by the
module.
Reviewers: echristo
Subscribers: llvm-commits
Differential Revision: http://reviews.llvm.org/D11000
From: Mehdi Amini <mehdi.amini@apple.com>
llvm-svn: 241618
The code responsible for shl folding in the DAGCombiner was assuming incorrectly that all constants are less than 64 bits. This patch simply changes the way values are compared.
It has been reverted previously because of some problems with comparing APInt with raw uint64_t. That has been fixed/changed with r241204.
llvm-svn: 241254
Summary: This patch fixes the cases of sext/zext constant folding in DAG combiner where constans do not fit 64 bits. The fix simply removes un$
Test Plan: New regression test included.
Reviewers: RKSimon
Reviewed By: RKSimon
Subscribers: RKSimon, llvm-commits
Differential Revision: http://reviews.llvm.org/D10607
llvm-svn: 240991
We had a hack in SDAGBuilder in place to work around this but now we
can avoid that. Call BuildExactSDIV from BuildSDIV so DAGCombiner can
perform this trick automatically.
The added check in DAGCombiner is necessary to prevent exact sdiv by pow2
from regressing as the target-specific pow2 lowering is not aware of
exact bits yet.
This is mostly covered by existing tests. One side effect is that we
get the better lowering for exact vector sdivs now too :)
llvm-svn: 240891
Summary: The code responsible for shl folding in the DAGCombiner was assuming incorrectly that all constants are less than 64 bits. This patch simply changes the way values are compared.
Test Plan: A regression test included.
Reviewers: andreadb
Reviewed By: andreadb
Subscribers: andreadb, test, llvm-commits
Differential Revision: http://reviews.llvm.org/D10602
llvm-svn: 240291
This will allow classes to implement the AA interface without deriving
from the class or referencing an internal enum of some other class as
their return types.
Also, to a pretty fundamental extent, concepts such as 'NoAlias',
'MayAlias', and 'MustAlias' are first class concepts in LLVM and we
aren't saving anything by scoping them heavily.
My mild preference would have been to use a scoped enum, but that
feature is essentially completely broken AFAICT. I'm extremely
disappointed. For example, we cannot through any reasonable[1] means
construct an enum class (or analog) which has scoped names but converts
to a boolean in order to test for the possibility of aliasing.
[1]: Richard Smith came up with a "solution", but it requires class
templates, and lots of boilerplate setting up the enumeration multiple
times. Something like Boost.PP could potentially bundle this up, but
even that would be quite painful and it doesn't seem realistically worth
it. The enum class solution would probably work without the need for
a bool conversion.
Differential Revision: http://reviews.llvm.org/D10495
llvm-svn: 240255
The patch is generated using this command:
tools/clang/tools/extra/clang-tidy/tool/run-clang-tidy.py -fix \
-checks=-*,llvm-namespace-comment -header-filter='llvm/.*|clang/.*' \
llvm/lib/
Thanks to Eugene Kosov for the original patch!
llvm-svn: 240137
that it is its own entity in the form of MemoryLocation, and update all
the callers.
This is an entirely mechanical change. References to "Location" within
AA subclases become "MemoryLocation", and elsewhere
"AliasAnalysis::Location" becomes "MemoryLocation". Hope that helps
out-of-tree folks update.
llvm-svn: 239885
This is an updated version of the patch that was checked in at:
http://reviews.llvm.org/rL237046
but subsequently reverted because it exposed a bug in the DAG Combiner:
http://reviews.llvm.org/D9893
This time, there's an enablement flag ("EnableFMFInDAG") around the code in
SelectionDAGBuilder where we copy the set of FP optimization flags from IR
instructions to DAG nodes. So, in theory, there should be no functional change
from this patch as-is, but it will allow testing with the added functionality
to proceed via "-enable-fmf-dag" passed to llc.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
Differential Revision: http://reviews.llvm.org/D10403
llvm-svn: 239828
Reapply r239539. Don't assume the collected number of
stores is the same vector size. Just take the first N
stores to fill the vector.
llvm-svn: 239825
Now actually stores the non-zero constant instead of 0.
I somehow forgot to include this part of r238108.
The test change was just an independent instruction order swap,
so just add another check line to satisfy CHECK-NEXT.
llvm-svn: 239539
For targets with a free fneg, this fold is always a net loss if it
ends up duplicating the multiply, so definitely avoid it.
This might be true for some targets without a free fneg too, but
I'll leave that for future investigation.
llvm-svn: 239167
Also, moved test cases from CodeGen/X86/fold-buildvector-bug.ll into
CodeGen/X86/buildvec-insertvec.ll and regenerated CHECK lines using
update_llc_test_checks.py.
llvm-svn: 239142
Method 'visitBUILD_VECTOR' in the DAGCombiner knows how to combine a
build_vector of a bunch of extract_vector_elt nodes and constant zero nodes
into a shuffle blend with a zero vector.
However, method 'visitBUILD_VECTOR' forgot that a floating point
build_vector may contain negative zero as well as positive zero.
Example:
define <2 x double> @example(<2 x double> %A) {
entry:
%0 = extractelement <2 x double> %A, i32 0
%1 = insertelement <2 x double> undef, double %0, i32 0
%2 = insertelement <2 x double> %1, double -0.0, i32 1
ret <2 x double> %2
}
Before this patch, llc (with -mattr=+sse4.1) wrongly generated
movq %xmm0, %xmm0 # xmm0 = xmm0[0],zero
So, the sign bit of the negative zero was effectively lost.
This patch fixes the problem by adding explicit checks for positive zero.
With this patch, llc produces the following code for the example above:
movhpd .LCPI0_0(%rip), %xmm0
where .LCPI0_0 referes to a 'double -0'.
llvm-svn: 239070
On GPU targets, materializing constants is cheap and stores are
expensive, so only doing this for zero vectors was silly.
Most of the new testcases aren't optimally merged, and are for
later improvements.
llvm-svn: 238108
This patch improves support for sign extension of the lower lanes of vectors of integers by making use of the SSE41 pmovsx* sign extension instructions where possible, and optimizing the sign extension by shifts on pre-SSE41 targets (avoiding the use of i64 arithmetic shifts which require scalarization).
It converts SIGN_EXTEND nodes to SIGN_EXTEND_VECTOR_INREG where necessary, that more closely matches the pmovsx* instruction than the default approach of using SIGN_EXTEND_INREG which splits the operation (into an ANY_EXTEND lowered to a shuffle followed by shifts) making instruction matching difficult during lowering. Necessary support for SIGN_EXTEND_VECTOR_INREG has been added to the DAGCombiner.
Differential Revision: http://reviews.llvm.org/D9848
llvm-svn: 237885
DAG.FoldConstantArithmetic() can fail even though both operands are
Constants if OpaqueConstants are involved. Continue trying other combine
possibilities in tis case.
Differential Revision: http://reviews.llvm.org/D6946
Somewhat related to PR21801 / rdar://19211454
llvm-svn: 237822
In CombineToPreIndexedLoadStore, when the offset is a constant, we have code
that looks for other uses of the pointer which are constant offset computations
so that they can be rewritten in terms of the updated pointer so that we don't
need to keep a copy of the base pointer to compute these constant offsets.
Unfortunately, when it iterated over the uses, it did so by SDNodes, and so we
could confuse ourselves if the base pointer was produced by a node that had
multiple results (because we would not immediately exclude uses of the other
node results). This was reported as PR22755. Unfortunately, we don't have a
test case (and I've also been unable to produce one thus far), but at least the
mistake is clear. The right way to fix this problem is to make use of the information
contained in the use iterators to filter out any uses of other results of the
node producing the base pointer.
This should be mostly NFC, but should also fix PR22755 (for which,
unfortunately, we have no in-tree test case).
llvm-svn: 237576
This is a less ambitious version of:
http://reviews.llvm.org/rL236546
because that was reverted in:
http://reviews.llvm.org/rL236600
because it caused memory corruption that wasn't related to FMF
but was actually due to making nodes with 2 operands derive from a
plain SDNode rather than a BinarySDNode.
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
llvm-svn: 237046
The bug showed up as a compile-time assertion failure:
Assertion `NumBits >= MIN_INT_BITS && "bitwidth too small"' failed
when building msan tests on x86-64.
Prior to r236850, this bug was masked due to a bogus alignment check,
which also accidentally rejected non-byte-sized accesses. Afterwards,
an invalid ElementSizeBytes == 0 got further into the function, and
triggered the assertion failure.
It would probably be a good idea to allow it to handle merging stores
of unusual widths as well, but for now, to un-break it, I'm just
making the minimal fix.
Differential Revision: http://reviews.llvm.org/D9626
llvm-svn: 236927
1) check whether the alignment of the memory is sufficient for the
*merged* store or load to be efficient.
Not doing so can result in some ridiculously poor code generation, if
merging creates a vector operation which must be aligned but isn't.
2) DON'T check that the alignment of each load/store is equal. If
you're merging 2 4-byte stores, the first *might* have 8-byte
alignment, but the second certainly will have 4-byte alignment. We do
want to allow those to be merged.
llvm-svn: 236850
This patch adds the minimum plumbing necessary to use IR-level
fast-math-flags (FMF) in the backend without actually using
them for anything yet. This is a follow-on to:
http://reviews.llvm.org/rL235997
...which split the existing nsw / nuw / exact flags and FMF
into their own struct.
There are 2 structural changes here:
1. The main diff is that we're preparing to extend the optimization
flags to affect more than just binary SDNodes. Eg, IR intrinsics
( https://llvm.org/bugs/show_bug.cgi?id=21290 ) or non-binop nodes
that don't even exist in IR such as FMA, FNEG, etc.
2. The other change is that we're actually copying the FP fast-math-flags
from the IR instructions to SDNodes.
Differential Revision: http://reviews.llvm.org/D8900
llvm-svn: 236546
This patch makes ReplaceExtractVectorEltOfLoadWithNarrowedLoad convert
the element number from getVectorIdxTy() to PtrTy before doing pointer
arithmetic on it. This is needed on z, where element numbers are i32
but pointers are i64.
Original patch by Richard Sandiford.
llvm-svn: 236530
For little-endian, the function would convert (extract_vector_elt (load X), Y)
to X + Y*sizeof(elt). For big-endian it would instead use
X + sizeof(vec) - Y*sizeof(elt). The big-endian case wasn't right since
vector index order always follows memory/array order, even for big-endian.
(Note that the current handling has to be wrong for Y==0 since it would
access beyond the end of the vector.)
Original patch by Richard Sandiford.
llvm-svn: 236529
At the least it should be guarded by some kind of target hook.
It also introduced catastrophic compile time and code quality
regressions on some out of tree targets (test case still being
reduced/sanitized).
Sanjay agreed with reverting this patch until these issues can be
resolved.
llvm-svn: 236199
This is a compromise: with this simple patch, we should always handle a chain of exactly 3
operations optimally, but we're not generating the optimal balanced binary tree for a longer
sequence.
In general, this transform will reduce the dependency chain for a sequence of instructions
using N operands from a worst case N-1 dependent operations to N/2 dependent operations.
The optimal balanced binary tree would reduce the chain to log2(N).
The trade-off for not dealing with longer sequences is: (1) we have less complexity in the
compiler, (2) we avoid unknown compile-time blowup calculating a balanced tree, and (3) we
don't need to worry about the increased register pressure required to parallelize longer
sequences. It also seems unlikely that we would ever encounter really long strings of
dependent ops like that in the wild, but I'm not sure how to verify that speculation.
FWIW, I see no perf difference for test-suite running on btver2 (x86-64) with -ffast-math
and this patch.
We can extend this patch to cover other associative operations such as fmul, fmax, fmin,
integer add, integer mul.
This is a partial fix for:
https://llvm.org/bugs/show_bug.cgi?id=17305
and if extended:
https://llvm.org/bugs/show_bug.cgi?id=21768https://llvm.org/bugs/show_bug.cgi?id=23116
The issue also came up in:
http://reviews.llvm.org/D8941
Differential Revision: http://reviews.llvm.org/D9232
llvm-svn: 236031
This is a preliminary step to using the IR-level floating-point fast-math-flags in the SDAG (D8900).
In this patch, we introduce the optimization flags as their own struct. As noted in the TODO comment,
we should eventually share this data between the IR passes and the backend.
We also switch the existing nsw / nuw / exact bit functionality of the BinaryWithFlagsSDNode class to
use the new struct.
The tradeoff is that instead of using the free but limited space of SDNode's SubclassData, we add a
data member to the subclass. This means we don't have to repeat all of the get/set methods per flag,
but we're potentially adding size to all nodes of this subclassi type.
In practice on 64-bit systems (measured on Linux and MacOS X), there is no size difference between an
SDNode and BinaryWithFlagsSDNode after this change: they're both 80 bytes. This means that we had at
least one free byte to play with due to struct alignment.
Differential Revision: http://reviews.llvm.org/D9325
llvm-svn: 235997
[DebugInfo] Add debug locations to constant SD nodes
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235989
This adds debug location to constant nodes of Selection DAG and updates
all places that create constants to pass debug locations
(see PR13269).
Can't guarantee that all locations are correct, but in a lot of cases choice
is obvious, so most of them should be. At least all tests pass.
Tests for these changes do not cover everything, instead just check it for
SDNodes, ARM and AArch64 where it's easy to get incorrect locations on
constants.
This is not complete fix as FastISel contains workaround for wrong debug
locations, which drops locations from instructions on processing constants,
but there isn't currently a way to use debug locations from constants there
as llvm::Constant doesn't cache it (yet). Although this is a bit different
issue, not directly related to these changes.
Differential Revision: http://reviews.llvm.org/D9084
llvm-svn: 235977
right scaling.
In the function canFoldInAddressingMode, VT is computed as the type of the
destination/source of a LOAD/STORE operations, instead of the memory type of the
operation.
On targets with a scaling factor on the offset of the LOAD/STORE operations, the
function may return false for actually valid cases. This may then prevent the
selection of profitable pre or post indexed load/store operations, and instead
select pre or post indexed load/store for unprofitable cases.
Patch by Francois de Ferriere <francois.de-ferriere@st.com>!
Differential Revision: http://reviews.llvm.org/D9146
llvm-svn: 235780
Patch to remove extra bitcasts from shuffles, this is often a legacy of XformToShuffleWithZero being used to combine bitmaskings (of float vectors bitcast to integer vectors) into shuffles: bitcast(shuffle(bitcast(s0),bitcast(s1))) -> shuffle(s0,s1)
Differential Revision: http://reviews.llvm.org/D9097
llvm-svn: 235578
This turned up after r235333, but was a pre-existing bug. The optimization
which transforms select(c, load, load) into a load of a select of the addresses
does not handle indexed loads (pre/post inc/dec). However, it did not check for
them either, leading to a crash if it tried to transform one of them.
llvm-svn: 235497
Summary:
This patch adds legalization support to operate on FP16 as a load/store type
and do operations on it as floats.
Tests for ARM are added to test/CodeGen/ARM/fp16-promote.ll
Reviewers: srhines, t.p.northover
Differential Revision: http://reviews.llvm.org/D8755
llvm-svn: 235215
The only type that isn't an integer, isn't floating point, and isn't
a vector; ladies and gentlemen, the gift that keeps on giving: x86_mmx!
Fixes PR23246.
Original message (reverted in r235062):
[CodeGen] Combine concat_vectors of scalars into build_vector.
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
llvm-svn: 235072
Combine something like:
(v8i8 concat_vectors (v2i8 bitcast (i16)) x4)
into:
(v8i8 (bitcast (v4i16 BUILD_VECTOR (i16) x4)))
If any of the scalars are floating point, use that throughout.
Differential Revision: http://reviews.llvm.org/D8948
llvm-svn: 234809
In case of different types used for the condition of the selects the
select(select) -> select(and) normalisation cannot be performed.
See also: http://reviews.llvm.org/D7622
llvm-svn: 234763
We already do:
concat_vectors(scalar, undef) -> scalar_to_vector(scalar)
When the scalar is legal.
When it's not, but is a truncated legal scalar, we can also do:
concat_vectors(trunc(scalar), undef) -> scalar_to_vector(scalar)
Which is equivalent, since the upper lanes are undef anyway.
While there, teach the combine to look at more than 2 operands.
Differential Revision: http://reviews.llvm.org/D8883
llvm-svn: 234530
The bug manifests when there are two loads and two stores chained as follows in
a DAG,
(ld v3f32) -> (st f32) -> (ld v3f32) -> (st f32)
and the stores' values are extracted from the preceding vector loads.
MergeConsecutiveStores would replace the first store in the chain with the
merged vector store, which would create a cycle between the merged store node
and the last load node that appears in the chain.
This commits fixes the bug by replacing the last store in the chain instead.
rdar://problem/20275084
Differential Revision: http://reviews.llvm.org/D8849
llvm-svn: 234430
This patch attempts to fold the shuffling of 'scalar source' inputs - BUILD_VECTOR and SCALAR_TO_VECTOR nodes - if the shuffle node is the only user. This folds away a lot of unnecessary shuffle nodes, and allows quite a bit of constant folding that was being missed.
Differential Revision: http://reviews.llvm.org/D8516
llvm-svn: 234004
DAGCombiner::ReassociateOps was correctly testing for an constant integer scalar but failed to correctly test for constant integer vectors (it was testing for any constant vector).
llvm-svn: 233482
This patch adds supports for the vector constant folding of TRUNCATE and FP_EXTEND instructions and tidies up the SINT_TO_FP and UINT_TO_FP instructions to match.
It also moves the vector constant folding for the FNEG and FABS instructions to use the DAG.getNode() functionality like the other unary instructions.
Differential Revision: http://reviews.llvm.org/D8593
llvm-svn: 233224
Reverts the code change from r221168 and the relevant test.
It was a mistake to disable the combiner, and based on the ultimate
definition of 'optnone' we shouldn't have considered the test case
as failing in the first place.
llvm-svn: 233153
This is very related to the bug fixed in r174431. The problem is that
SelectionDAG does not include alignment in the uniquing of loads and
stores. When an otherwise no-op DAGCombine would increase the alignment
of a load or store, the original node would be returned (with the
alignment increased), which would cause the node not to be processed by
any further DAGCombines.
I don't have a direct testcase for this that manifests on an in-tree
target, but I did see some noise in the tests for other targets and have
updated them for it.
llvm-svn: 232780
Matt Arsenault